Nike Inc. Case Study

Nike Inc. Case Study
Nike, Inc. : Case Study in Operations Management
MGT 441
Prepared for: Dr. Davidson, Concord University
Prepared by:
Jeremiah Nelson
Johnathan Coleman
Emily O'Dell
December 4th, 2012
Introduction Low–cost, time–efficient manufacturing of goods is a key feature of a successful
production company in today's competitive global economy. Operations management, often
abbreviated in the business world as OM, is defined as "...the set of activities that creates value in
the form of goods and services by transforming inputs into outputs (Heizer and Render, p. 4)." Every
day, factories take in raw materials and use the labor hours and skills of their employees to
transform those same materials into a variety of consumer products, ... Show more content on
Helpwriting.net ...
Nike's management understands how important a relevant strategy is in the global environment, as
Don Blair, Nike's CFO, stated "...we are refocusing our efforts, increasing our investments in
innovation, using our voice for stronger advocacy and looking at how we incubate new, scalable
business models that enable us to thrive in a sustainable economy."
Forecasting Demand Forecasting demand is the art and science of predicting future demand. There
are several different techniques that can be employed alone or in combination with each other,
depending upon the firm's particular situation and the point in the product's life cycle, and they are
further classified as to the time horizon they represent. Forecasts are generally quantitative (relying
on historical data) or qualitative (such as variable personal experiences).
... Get more on HelpWriting.net ...

The Department Of Industrial & Manufacturing Engineering...
Acknowledgement The project topic presented in this report was a study carried out at the
Department of Industrial & Manufacturing Engineering & Technology, Bradley University. It was a
part of the course IME 501 Engineering Cost Analysis.
We would like to express our gratefulness to our Professor Dr. R. Pope–Ford, who guided us in this
study. We are obliged also to fellow classmates who devoted their time to us in discussing about this
analysis. We would also like to thank them for their careful proofreading.
(i)
Table of Contents
ACKKNOWLEDGEMNT ................................................................................................ i
1 INTRODUCTION .................................................................................................... 1
2 STATEMENT OF THE PROBLEM ......................................................................... 2
3 METHODS AND PROCEDURES......................................................................... ..3
3.1 Some of the Basic Financial Statements ............................................... ..3
3.11 Income Statement............................................................................... ..3
3.12 Balance Sheet .................................................................................... ..3
3.13 Statement of Cash Flow ..................................................................... ..4
3.2 Financial Statement Analysis ................................................................ ..4
3.2.1

My Statement Of Purpose For Industrial And Systems...
Einstein aptly said, "Knowledge is like an ocean and I'm just a young lad picking shells on its
shore." On a scale of such magnitude, I'm probably one who is still trailing rivers on their journey to
the deltas, but I certainly have the zeal to make it to the abyss of that ocean, facing the toughest of
the waves. It is my passion for nurturing my knowledge in the field I know best and where I believe
I can leave a lasting contribution to society, which has brought me to your doorstep.
Why M. Eng. in ORIE...
My undergraduate course curriculum and my involvement in several projects outside the
coursework has given me ample opportunities to gain experience in various fields of Industrial and
Systems Engineering. This has also assisted me in narrowing down my academic interests to
specific areas. My interest in Industrial Engineering is particularly because of its striking relevance
to real world problems; supported by my competence to model, formulate, and solve such problems.
However, with the maturity of the organizations in terms of information infrastructure, the speed of
access to that information and the plethora of types of that information have led to a natural
evolution in decision making from an Industrial Engineering perspective to an Information
Engineering perspective. ... Show more content on Helpwriting.net ...
His idea of Artificial Intelligence as the next big thing is interesting and convincing. As a part of my
baccalaureate dissertation, I came across some applications of Operations Research like Multi–
Agent Systems and Data Envelopment Analysis in the field of Artificial Intelligence. What
fascinates me even more is the opportunities OR presents to AI to boost

Analysis of SNC-Lavalin Essay
Analysis of SNC–Lavalin
Being one of the leading groups of engineering and construction companies in the world,
SNC–Lavalin is one of the most exciting and stimulating companies to read about. Having offices
across Canada, U.S., and in 30 other countries is just a small dose of their interesting attributes.
Throughout this paper, the reader will understand the relevant steps and activities taken by SNC–
Lavalin on a daily basis and on all projects. Having an innovative advanced management system and
interesting projects around the world that involves revenues that total over $3 billion for 2003 are
just a few traits that will capture any reader's interests about a company. Having part ownership of
the world's first all–electronic, ... Show more content on Helpwriting.net ...
It also offers internationally sourced project financing and equity investments for Build Own
Transfer (BOT) and Build Own Operate Transfer (BOOT) projects, as well as privatization,
including infrastructure management and day–to–day operations. SNC–Lavalin is a world–class
player in the business of public–private partnerships, as demonstrated by its part ownership in
Highway 407 near Toronto, which is recognized as one of the most successful road concessions in
the world. Highway 407 is a critical component in the Greater Toronto Area highway network
serving as a bypass and commuter route. Highway 407 is the world's first all–electronic, open–
access toll highway. SNC–Lavalin has set the pace for technical innovation in engineering design
and implementation with its multi–purpose Project Management System (PM+). It is a totally
integrated database which covers all facets of a project, from initial planning to final
commissioning, in one seamless package. The company uses 3D computer–aided–design and other
standard technology. SNC–Lavalin has built a proven track of worldwide reputation for delivering
projects on time and on budget. Founded in 1911 and active internationally for over 40 years, SNC–
Lavalin's business units worldwide are autonomous and have access to global resources needed to
assume total responsibility for every aspect of a project.
3.0 ENVIRONMENTAL BACKGROUND

Swot Analysis Of Gulfstream Operates The Largest Factory...
Rotation 1 Having accepted an offer less than two weeks after receiving word that Gulfstream was
actively seeking engineering co–ops, I jumped head first into the opportunity. Not only was I the
second ever co–op to the department, I was also the first industrial engineer. For these reasons, and
starting only one rotation after the first co–op, nearly everything had to be developed from scratch.
From team organizational structure to day to day tasks and end of rotation deliverables, everything
was brand new. In fact, this was one of the things that drove me to the position; a well–established
program expanding to include a new and exciting department. At the start of my first rotation, Fall
2013, I was placed in the product support organization within a manufacturing engineering team.
"Gulfstream operates the largest factory–owned service network in the business aviation industry.
The support system is anchored by 11 service centers located on four continents, including the
world's largest purpose–built business aircraft maintenance facility, which is in Savannah [1]". The
facility in question holds multiple hangars for each model aircraft in addition to three floors of
offices and cubicles. It is here that I found myself in the first rotation of work. The PSME team with
which I worked consisted of two full time employees, now labeled manufacturing engineers, who
had worked their way up from the shop floor, and a handful of contract employees, all of whom

Industrial Engineer Essay
COULD I BE AN INDUSTRIAL ENGINEER? Industrial Engineering is probably one of the most
versatile and varying fields of engineering. There are so many routes an individual can take with an
industrial engineering degree because the subject is applicable to so many areas, and this trait is one
of the most attractive characteristics of the major to me. What Does an Industrial Engineer Do? The
role of an industrial engineer is to maximize efficiency in systems that have workers, machines,
materials, information and energy designed to make a product or a service [1]. According to James
Shields, an industrial engineer who works for FedEx Ground, essentially, it is the responsibility of
an industrial engineer to understand a system and to ... Show more content on Helpwriting.net ...
Industrial engineers need to think differently from others and need to be creative thinkers. I have
exhibited my problem–solving skills daily in my job at Target. As a Target employee, I am required
to help customers find items that may not be on the shelves in the back room. When I first started, it
was daunting to find these items by myself in the backroom, but by learning my way around the
back room and asking for help, I could help customers on my own. I used my resources to have a
better understanding of the situation and solved my way through the problem. To be any type of
engineer, you need to think critically and problem solve. There will be times in my career in which I
need to complete a difficult project and I need to use my problem–solving skills to complete the
task. I have already gained and practiced problem solving, so I will be better prepared for the future
as an industrial engineer. My public speaking skills are apparent in the many presentations I have
led, such as with a program called Junior Achievements (JA). The point of JA is to create a product
and sell it to customers. As the head of the Sales Department, I needed to demonstrate to others how
to successfully talk about our product and to sell it to others. By teaching others how to properly
speak to others, I was practicing and honing my own speaking

Statement Of Purpose For Industrial And Systems Engineering
Statement of Purpose
Everyday, we use a plethora of products. From the toothbrush in the morning, to a fork during lunch
and a pillow in the night. They all have one thing in common: they were made by engineers,
engineers who have always asked the question "How to make products with the highest quality
possible with the given resources?" This concept has fascinated me from the inception of my college
days. This fascination along with my strong academic base makes me want to pursue Industrial and
Systems Engineering for my graduate study.
Born to a family with a business steeped in management, I was exposed from an early age to the
intricacies of trade. Ever since my adolescence, I wanted to see myself as an entrepreneur.I have
always wanted to deeply explore the techniques of optimization. For this, I believe one should
possess strong analytical ability and problem solving skill, which I believe I possess. I have
expertise in ... Show more content on Helpwriting.net ...
Being exposed to these new fields piqued my interest in the Planning, Production and Control
sector. This made me choose Industrial and Systems Engineering as my graduate study course.
My enthusiasm towards active participation in college events made me involve in various co–
curricular activities. I played an integral role in the technical club, SAE–CBIT of my institute. I
organized various technical events such as AQUABOT in SAE Convention 2012 and ROBO
SLAVE in Mechanica 2014. My communication and interactive skills made me a core member in
the hospitality committee in SAE Convention 2012. I even participated in blood donation camps and
donated my blood several times.These varied involvements honed my interpersonal and leadership
skills and instilled in me the importance of hard work to

Statement Of Industrial Engineering
"To improve is to change; to be perfect is to change often." – Winston Churchill
Disruptive innovations and Kaizen coupled with an ever–increasing pressure to generate more
profits continuously change the dynamics of the business world. Indeed, new information
technologies based on the internet of things are revolutionizing the manufacturing processes. These
technologies enable full visibility across the entire supply chain and offer actionable insights which,
when processed using the powerful tools of Industrial Engineering, help in making complex
decisions. Through masters in Industrial Engineering, I intend to learn emerging innovations in this
area, contribute positively to various complex decision–making processes and make a positive
change ... Show more content on Helpwriting.net ...
As a result, my interest in working in the field of Industrial Engineering grew rapidly. With a strong
foundation of manufacturing obtained from the undergraduate curriculum and motivation to learn
the real–time application of tools and techniques of Industrial Engineering, I took up my final year
group project as "Implementation of Lean in Manufacturing Actuators and Ball Valves." This project
was carried out with an industrial cooperation of 'Rotex Manufactures and Engineers Pvt Ltd.' We
analyzed the current processes using Value Stream Mapping and did a time and motion study, thus
identifying the wastages and bottlenecks in the system. Our goal is to maximize added value in
production and logistics. We aim to achieve this sustainable and efficient system by redesigning
plant layout, designing ergonomic workplaces, and through appropriate application of lean tools.
Industrial experience not only augmented my critical thinking capabilities and problem–solving
skills but also developed my understanding of corporate communication. All these experiences will
serve me invaluably during my masters'

On the Interface between Operations and Human Resources...
Commissioned Paper
On the Interface Between Operations and
Human Resources Management
John Boudreau Wallace Hopp John O. McClain L. Joseph Thomas
ILR Human Resource Studies, Cornell University, Ithaca, New York 14853
IEMS Department, Northwestern University, Evanston, Illinois 60208
Johnson School of Management, Cornell University, Ithaca, New York 14853
Johnson School of Management, Cornell University, Ithaca, New York 14853 jwb6@cornell.edu
hopp@northwestern.edu jom1@cornell.edu ljt3@cornell.edu
O
perations management (OM) and human resources management (HRM) historically have been very
separate ﬁelds. In practice, operations managers and human resource managers interact primarily on
administrative issues ... Show more content on Helpwriting.net ...
By helping workers to understand the implications of the OM design for their work and then
motivating them to act accordingly, the plant turned around its performance.
But simply acknowledging human considerations such as motivation is not enough. Consider the
case of a circuit–board plant of a large computer manufacturer that was also plagued by low
throughput.
Recognizing that worker contributions were essential, management embarked on a motivational
campaign, which included shirts, pep talks, and illuminated signs with slogans such as "I love my
job." Not only did these efforts fail to promote higher output, but also the workforce was put off by
them and became cynical about improvement efforts in general.
Eventually, the circuit–board plant adopted an alternate approach, which made use of both OM and
a more sophisticated understanding of motivation. It included training the workers to understand key
success variables of pull systems, investment in additional capacity that gave work teams more ways
to share and combine tasks, and installation of new control systems that the workforce understood.
Throughput was doubled within months; total cycle time was slashed by three–quarters in a year.
The lesson from this story is that a clear operational focus can be critical to the success of human
relations initiatives. Only when the workforce

How Did The Industrial Revolution Shape The World Of...
The Industrial Revolution helped shape the world of engineering and architecture. In the past,
engineers were the only ones who designed factories; until architects began competing with them.
To start off, factories were once a new type of building that aided in the exploration of architecture.
Therefore, factories allowed architects to explore the organizational, structural, and spatial
ramifications of machines and material production. Also, factories allowed architects freedom to
expand on new ideas. Furthermore, new building materials and technology have encouraged the
emerging success of modern architecture. For example, floor to ceiling glass created lightness and
openness to buildings. Le Corbusier once said that a building is a machine for living in. Following
this, a factory is basically like a machine in the form of a building. ... Show more content on
Helpwriting.net ...
As a result, factories have transitioned from being well–integrated urban machines to autonomous
machines housed in suburban sheds. On that note, these suburban sheds are tightly sealed, air–
conditioned and artificially lit. During World War II, factories anticipated a need for camouflage
against enemies. Thus, the factory is converted into an omnipresent generic shed. Following, this
generic shed conversion; it is separated from its more specific relationship with its product or its
site. To continue, a factory designed with a glass facade sets an iconic and remarkable impact on the
history of architecture. For example, The Fagus Factory designed by Walter Gropius is one of the
most important examples of modern architecture. For the reason that the entire facade is composed
of glass. The glass walls provide that extra natural lighting and create a sense of continuity and
openness of the interior to the exterior of the building. The expanse the glass visually removes the
separation from the interior to the

Statement Of Parag Anej MS Applicant In Industrial...
Statement of Purpose Name–Parag Aneja (MS Applicant in Industrial Engineering, FALL 2015)
Every day new varieties of products are being sold in the market ranging from mobile phones to cars
to aircrafts. In 1903 there were just 63000 cars worldwide, this count reached 530 million in 2002.
Vast amount of industrial engineering techniques were involved in achieving this transformation.
But all the research and innovation that goes in their manufacturing stays hidden deep inside them.
My aim is to unlock those manufacturing breakthroughs and to focus my research on advancing
them.
I, Parag Aneja, a mechanical engineer from Thapar University (India) currently working with TATA
Motors as an assistant manager in Facility Planning department, aspire every ... Show more content
on Helpwriting.net ...
It has been a fascinating journey so far, to know how the multifaceted machineries make many lives
easier in the real world. The complexities of mass production and optimization of processes intrigue
me. I am interested in the field of manufacturing systems with a focus on lean & quick response
manufacturing in order to reduce the time to introduce new products and manufacture existing
products with minimal effect on the ergonomics of human operators. The idea that attracts me the
most is– whenever the production capacity of an existing line is increased by industrial engineering
techniques and automation, it has an impact on the operating conditions, line safety, quality and
material handling and it is not well accepted by the line operators. I want to focus my research in
this area and to develop tools & techniques which can minimize this impact and will lead to
maximum productivity and short lead time. My long term plan is to become a specialist in the field
of manufacturing systems and to pursue a PhD and continue extensive

Persuasive Essay : Propeller Powered Car
Statement of Purpose
When I was in high school, I was called upon by my science teacher to develop and explain an
exhibit called "Propeller Powered Car", for our annual school science exhibition. I always enjoyed
science and being a good student, I was confident of the theoretical explanations. What I was
nervous about was about the interactions with other competing students, visiting friends and family
and most of all, to present the topic well and not let down my teachers and school. I practiced my
material several times and made it so that visitors could do small experiments to practically
understand concepts of Newton's Laws of Motion, acceleration and friction easily. The project
turned out to be a great success and my work was appreciated. That day, I realized that practical
knowledge can lead to an in depth understanding of concepts. I also understood that these small
experiments I designed to explain fundamental physics was in action on a much larger scale in all
sorts of industrial machinery. It's nearly a decade now since that day; my interest in machines and
how they are designed and their workings is still on an upward trajectory. I have always made an
effort to understand the mechanism of various components of machines. Seeing this, my father took
me to visit his factory; it was the first time I came across large machinery working synchronously
and systemically and on such a large scale. I scored 83.25 percent in my high school leaving exams
and knew that I

Of Statement For Purpose For Industrial Engineering
STATEMENT OF PURPOSE
My passion for engineering was kindled during my childhood when I spent numerous hours poring
over my late grandfather's hand–written notes. A seasoned mechanical and communications
engineer, he worked with the Tank Division of the Indian Army. The yellowed pages of his notes
splattered with black ink, calculations, and drawings cast a spell on me! Years later, while working
in the assembly plant of General Motors in India, I was equally captivated by the buzzing and lively
atmosphere of the plant. It was a treat to watch man and machine working in tandem, efficiently
rolling out state of the art engines and passenger cars. Thus, here I am, embarking on the path of
pursuing my dream by applying for the Industrial Engineering program at your esteemed university.
After topping high school, I joined the Mechanical Engineering Department at PSG College of
Technology. ... Show more content on Helpwriting.net ...
However, in mid–2017 GM decided to stop its domestic sales in India. I quit my job and joined IFB
Automotive Pvt. Ltd, a company that designs and manufactures automotive components like door
mechanisms, seating mechanisms and automobile motors for OEMs like Honda, TATA, Renault, and
Daimler. Today in my role as an executive of design and development in the seating design team, I
design and validate prototypes of seating mechanisms for automobiles, and I am responsible for
problem–free production in the plant. In my free time, I am undergoing a part–time online course in
Machine Learning.
With the manufacturing sector moving towards Industry 4.0 and smart factories, this is a propitious
time to pursue higher studies in Industrial Engineering. Having a fair bit of industrial exposure and
some experience with advanced manufacturing, a Master's program will further enhance my
knowledge and be a solid foundation to build my

Desire to Study Industrial Engineering in Operations...
My undergraduate years as a mechanical major had successfully provided me a solid foundation in
technical areas and quantitative methods. I wish to further develop my skills and broaden my
knowledge in Industrial Engineering, particularly in the advanced studies based on Operations
Research & Information Systems. By applying cross–disciplinary approach in solving complex
engineering problems with specific technical aspects and through analysis of managerial and
economic factors, I will prepare myself to serve as an efficient industrial engineer or manager for
business in the global arena.
The courses during my undergraduate studies taught me the basic engineering concepts in theory
and practice. I chose an assortment of courses which ... Show more content on Helpwriting.net ...
Kiran D Mali enhanced my knowledge in experiments. Working in a laboratory environment has
strengthened my concepts in engineering statistics and optimization. Evaluating of Risk &
Reliability of a system, Using Analysis–of–Variance techniques to optimize the system performance
has been a strong value–addition to me through this experience. I got a chance to intern with TATA
Johnson Controls Ltd, Pune an auto–ancillary company which is into manufacturing seating
systems. It was during this six–month internship period I gained invaluable exposure to industrial
processes. I have led projects in Supply Chain Management under the guidance of General
Manager–Operations. Rigorous study and efforts in this direction with the application of
optimization techniques enabled me to put forward proposals using Value Analysis/Value
Engineering process.. By using the data from SAP ERP and thorough analysis using spreadsheets, I
have arrived at both long–term and short–term proposals to make sure maximum productivity and
cost–efficiency are achieved. The implementation culminated with an overall reduction in the shift–
load besides significant cost saving.
The internship experience in a way further motivated me to work on industrial processes. After
graduation, I began working as a Business Analyst serving in Automotive Retail Industry (Hyundai).
This industry presented a huge operations challenge in addition to the enormous complexity of the
economic and market

Personal Statement: The Secret Of Mechanical Engineering
The secret of mankind's success, strength, and glory is knowledge. Knowledge is not something we
are born with. It is through curious observation and constant learning the wealth of knowledge is
amassed. I believe that even if a Subject is mile away from the reach of our contemplation, it can be
learnt much through research and experience.
I deem it as an opportunity and privilege to let me say something about myself by the way of
introduction. I am Pratap Reddy Narayan graduate in Mechanical Engineering from M.V.S.R
Engineering College, a highly reputed institution for Science and Technology affiliated to Osmania
University, Hyderabad one of the premiere universities in India. The college was accredited by
AICTE (All India Council For Technical Education) and approved by NBA (National Board Of
Accreditation). I had a particular fascination for automobiles, and production, thus, I turned towards
Mechanical Engineering as my major. This branch made me aware of the design aspects of
automobiles, where I learnt about the underlying ... Show more content on Helpwriting.net ...
During my schooling, I was so much interested in mathematics and physical sciences that I used to
allot most of my studying time towards these subjects only. After completing my high school, my
interest for education and inclination towards applied science drove me to opt for math, physics and
chemistry in my higher secondary education. After my 10+2, at the door step of entering into my
professional studies, I felt that Engineering would be the area, which would give me the opportunity
to learn and explore how the fundamentals of science are applied to create technology for practical
and real purposes. For that, I had to take the EAMCET (Engineering Agricultural and Medical
Common Entrance Test) and cleared it with flying colors. With the result I have secured in this test,
I decided to concentrate on Mechanical stream and joined for Bachelor of

Industrial Engineering Application Essay
STATEMENT OF PURPOSE Passion, professionalism and perseverance are the three qualities that
run my academic and professional life. Years of undergraduate study and professional experience
have brought me understanding of various domains and aspects of industrial engineering. Imagine
an experience of studying in a group of people with maths, science and business acumen which has
its applications in all fields from engineering product design to business models. Such an
amalgamation of experiences can only be achieved by pursuing my master's degree in Industrial
engineering. Since high school I was incredibly passionate about being in leadership positions with
aim of helping others to do something meaningful. Growing up in a family inclined towards the
sciences, I have always been tinkering around with all kinds of gadgets. Hence when it came to take
undergraduate studies, Mechanical engineering was the only natural choice. Prompted by my
undergraduate education in mechanical engineering at highly reputed VIT University, Vellore where
subjects like Manufacturing Processes, Industrial management and Operation research instilled in
me a desire to delve deeper into the various specialties of mathematics and statistics. Over time I
began to develop a penchant over these courses which had project components on a wide ... Show
more content on Helpwriting.net ...
Areas of study dealt in your programme like design and control of production systems, operational
scheduling, inventory, demand forecasting, layout, material handling, warehousing, and logistics
systems are perfectly conducive to my goals both practically and intellectually. The fact that makes
me excited about ISE at NCSU is that I will be able to research in fields of production, logistics and
human systems which will enable me to solve any performance or bottleneck issues in any

Statement of Purpose Essay
Ever since I could remember there has always been an inclination towards science. The desire to
understand how things worked has always intrigued me. Set on the inclination I always explored the
basic application of science i.e. building a lemon battery to designing a simple pulley lift at science
fairs at school. Thus making Production Engineering a good option. It provides a strong engineering
foundation and also educates on the management of an industry. This is the very reason I was able to
decide that I wanted a career in this field. With my mother being a teacher the values of education
have been inculcated into me from a very young age. I was always given a freedom to choose my
career. With the existing inclination towards ... Show more content on Helpwriting.net ...
I am also a member of I.S.M.E (Indian Society for Mechanical Engineers) which organized various
technical seminars on latest developments of technology in the manufacturing world. The society
also caters to facilitating experienced personnel from the industry sharing their insight of the
industry. I am currently working at Karamtara Engineering Pvt. Ltd. Mumbai. I am working with the
Supply chain and Sales department which handle management of clients and materials of the
ongoing projects. I have been actively working in the logistics and sales for different clients and
transportation sectors of the department. I have undergone six month in–plant training at Larsen and
Toubro (L&T) Ltd. at Powai, Mumbai. I worked on the Shop floor in the Electrical and Automation
Integrated Group which manufacture Air Circuit Breakers. An internship in a company of this scale
has given me an understanding on how the industry works and that every detail contributes to ensure
that the company works like a well oiled machine. As my project, I worked on increasing First Time
Yield of the shop floor by utilizing Six Sigma methodology. I succeeded in reducing defects from a
considerable amount of 10.6% to 0.7% resulting in considerable savings. I also worked on Value
engineering of Air Circuit Breaker and made alterations in the process of manufacturing with
projected savings of 28%. I would to be a part of the Husky culture and take this

My Statement of Purpose: Transitioning from Production...
Transitioning from Production Engineering to Industrial Engineering
Introduction My greatest achievements, continual passion for learning, and drive to excel in
educational pursuits are all predicated on a fascination with engineering. From a very young age, I
have been fascinated with how devices work, and as I learned more about how engineering is a
disruptive force in many industries, I knew this had to be my profession. My passionate pursuit of
expertise in this field led me to pursue an undergraduate degree in production engineering.
Growth in Engineering Years
Within the next few months, I will be completing my Bachelors' of Engineering in Production
Engineering from the Dwarkadas J.Sanghvi College of Engineering in Mumbai. Throughout these
years I have completely committed myself to excelling in the attainment of my educational goals,
fueled by a passion to excel in engineering specifically. Of the many courses taken during my
undergraduate program, Production and Operational Management was a pivot, transformational one.
This course became my passion and I quickly read and captured as much information and
intelligence I possibly could. As I gained greater insight into industrial engineering in this course, I
could see how the core concepts of production engineering contributed to its best practices. The
foundational elements of industrial engineering could be more effective with production
engineering. I began to plan research projects and device potential

The Pros And Cons Of Industrial Engineering And Industrial...
Everyone needs to eat and the matter of how farmers grow the food is important for our future. As
the world progresses and becomes more and more modernized the old and the new clash and that is
what is happening with farming. In the world of farming there are many methods of growing crops,
two of them being organic and the other industrial. The two are definitely not the same and hold
different viewpoints on the methods of farming. Organic farming is more old fashioned and very
natural while on the other hand industrial farming being more modern and more synthetic. Organic
farming has more of a moral side and industrial farming has a more "get the job done" attitude.
Industrial farming uses genetically modified organisms and modern machinery with science behind
it. Organic farming still uses some modern technology such as tractors and harvesting tools.
Industrial farming is the better way of farming due to the use of genetically modified
organisms,yield of crops through industrialized farming methods, and the efficiency of industrial
farms.
Genetically modified organisms are good despite what people say about them. Genetically modified
organisms are also efficient to make according to the Fairfield–sonn who claims "Unlike relatively
slow, traditional trial–and–error crossbreeding hybridization methods within a species that have
been used for centuries, genetically modified organisms (GMOs) are created much more quickly and
precisely by a process called genetic engineering

Personal Statement For Industrial Engineering
What you get by achieving your goals is not as important as what you become by achieving your
goals" – Henry David Thoreau.
One of the first and most common questions I get bombarded with is "Why did you choose
Mechanical Engineering?" as girls taking up the course is considered quite an oddity. As a child, I
had frequently visited my uncle's plastics manufacturing company. Among everything that I saw
there, what fascinated me the most was the harmony in the synchronization of so many different sub
systems which eventually amalgamate as one, forming a complex working system. Realizing my
interest and my aptitude in physics, my mom gifted me the book 'Principles of Physics' (Halliday,
Resnick & Walker, 2010) when I was in the eleventh grade. The book opened new doors for me and
I began to really enjoy the process and techniques used in problem solving. Once the intoxication of
the pleasure of reaching a solution for a problem after ... Show more content on Helpwriting.net ...
As a dynamic cross–functional field with diverse applications, Industrial engineering is one such
subject which can take any system, process, technique, method and make it work better. It harnesses
the power to virtually touch every aspect of life.I've always envisioned change among the societies
and every activity I took up and failed has only motivated to me to finish what I've started. I find
that the research work involved in Industrial Engineering at __ university is a state of the art
platform for me to prove my true potential. The additional information I got from Prof ___________
at your university, have confirmed my belief that ________ is the college where I want to pursue my
masters. The highly competitive and intellectually stimulating atmosphere at ____ University will
bring out the best in me. This prompts me to apply for the program in Industrial Engineering at your

Industrial Engineering Research Paper
Introduction
This research is about the engineering profession. This research was chosen to clarify the field of
industrial engineering. Industrial engineering is a branch of engineering mechanical which deals
with the manufacturing and production processes, and inspection and testing of various products of
the industrial process and examine the quality of development and the development of different
manufacturing mechanisms, and the work of all these different things at the lowest possible cost.
Industrial Engineering and function as a link between the various engineering disciplines and
economic disciplines that are interested in the optimal use of these machines and reduce the cost of
the largest degree possible to run, and get biggest profit. Industrial Engineering and one of
importance in the development of ... Show more content on Helpwriting.net ...
What are the technical skills you think you are good at. What specialization you think they fit best?
Why?
Technical skills that I'm good at it is a Project Management is planning, organization and control of
various resources to ensure the success of the project on time and at the lowest cost while ensuring
the quality of the project. As the successful management of working on the success of some
companies to other companies. Also, data analysis is the process by which the data processing using
all roads, whether mathematical calculations or other process data analysis is important in all areas
and that skills for Industrial Engineers because they are doing projects and corporate management.
2.What are the technical skills you think you lack? What specialization you think they match? why?
Technical skills that I think I have lacked is the programming is instructions or commands to a
computer or any other device to deal with the data. that is multi–language, such as C and C + and
Java, it may not be important for Industrial Engineer.
3.What are the social skills that people say you are good at? Which specialization these skills are
needed

Beck Manufacturing Plant Capacity
Beck Manufacturing & Plant Capacity
Pete Garcia
BUS644: Operations Management
October 26, 2014 Dr.: Gail Hoskyns–Long
Ashford University
Beck Manufacturing & Plant Capacity
Introduction
In this paper, we will focus on the case study, which discusses about the plant capacity and Beck
Manufacturing. In addition, after reading the case study it becomes evident that we need to help
Beck's Manufacturing, president in making the best decision possible in regards to determining his
facilities capacity. Therefore, we need to note that Beck's Manufacturing is a major producer of
steering gears in the auto industry. Nevertheless, we also need to know how the manufacturing
process is being done, thus allowing us to ... Show more content on Helpwriting.net ...
Now, let us note that there are 3 machines, thus giving us a total of 2,880 units. In addition, the
Boring represents a 25–reject rate, giving us 58 in units. Nevertheless, if we subtract 2,880 units
produced by all three machines from 58 units, then we will get a new total of 2,822 units.
The Drilling Capacity
The following includes, the Drilling Capacity, which has a run time of 2.5 minutes per piece.
Therefore, this produces a total of 384 units per machine, giving us a total of 960 minutes. In
addition, providing that there are a total of 6 machines, thus giving us a total of 2,304 units. Moving
forward, giving that we know that Drilling has a 75–reject rate, and thus providing us with a total of
162 units. Nevertheless, if we subtract the total amount of units produced from all 6 machines of
2,304 units with the 162 units, this will provide us with a new total of 2,142 units.
The System Capacity In order to find the capacity system, we are able to take the lowest number in
units, of course after the reject rate, which for this case is produced by the grinding with 2,128 units.
Therefore, because we are unable to produce more units due to reaching the capacity mark, or for no
more product to be allowed through in the completed cycle. Thus, the capacity system turns out to
be 2,128 units. "Capacity utilization and machine scheduling also reflect tactical

Statement Of MS Industrial Engineering
It is after carefully considering strong academic credentials in Mechanical engineering from GITAM
University and my firm background in industrial research that I have decided to apply for the MS
Industrial engineering Program. Industrial engineering is what makes it one of the most challenging
fields as it not only meets needs, but has the power to create new needs, rules and total environments
of its own. Also, I believe over time, I cultivated right attitude and maturity towards industrial
research. So far already, I have done some amount of theoretical and applied research in the
aforementioned area. I believe that MS course in the USA will develop my industry knowledge and
ready to meet the emerging challenges and contribute towards the industrial engineering and to
create a more equitable and more innovative world.
It was a great opportunity to study at the GITAM University, one of the premier engineering
institutes in India, My under graduate program in B.E mechanical engineering is a well rounded
program. It not only helped me a solid foundation of Mechanical fundamentals, but ... Show more
content on Helpwriting.net ...
My active involvements in these projects have further evolved my skills of design, development,
production and manufacturing. Understanding requirements, implementing with effective and
efficient cost practices, preparing documentations have greatly improved my skills of technical
analysis, design and logic. In this project, I interacted with various professors and experts which
helped for me the spirit of communication. After understanding the real picture of how innovations
and advancement in the field of industrial engineering could provide cutting edge solutions to
organizations. Hence, I have decided to pursue graduate studies in order to gain deeper insight into
these

Statement Of Purpose For MS Industrial Engineering
Learning makes a man fit company for him. This maxim impressed me right from my childhood
days to learn something new each day, learn, learn and relearn until my end. My decision to apply
for MS Industrial engineering has emerged, both from my passion for research and my aspiration to
understand the language of mechanical engineering. Industrial engineering offers unlimited scope of
research, innovate & create value through latest cutting–edge techniques which I intend to learn in
the US, a research based highly developed economy. I believe the MS Program at your esteemed
university is of paramount importance for me to succeed in my goal of entrepreneurship, which in
turn, will fulfill twin objectives – helping society through job creation besides an outlet for my
creativity.
My exceptional academic records secured in my secondary and higher secondary examinations and
in my undergraduate course in Mechanical Engineering at GITAM University–Hyderabad has
provided me the poise to excel in research and course work. The curriculum exposed me to the
whole spectrum of fields relating to Mechanical Engineering. ... Show more content on
Helpwriting.net ...
I designed numerous projects in academics .I did my mini project on design and optimization of
Maruti Suzuki swift wheel hub and steering knuckle to improve vehicle performance. This has
evolved my excellent design and development skills. My project has taught me a very good lesson
on practical difficulties involved in realizing a project in the design that are expected to perform
flawlessly for decades together under extreme conditions and also this has evolved my research
curiosity in the industrial engineering field in

Waiting Lines and Queuing Models Essay
Waiting Lines & Queuing Models American Military University Business 312 For my project on
other operations research techniques I have decided to research waiting lines and queuing models.
My interest in this application stems from my personal dislike for standing in lines and waiting on
hold while on the phone. This is virtually my only pet peeve; nothing aggravates me faster than
standing in a line or waiting on hold. Like most people I go out of my way to avoid lines, using
strategies such as arriving early or visiting during non–peak times. However, before investigating
this topic, I had no idea there was a specific science behind the madness. Queuing models are
important applications for predicting congestion in a ... Show more content on Helpwriting.net ...
(R. Cooper, 1981) My independent research will focus on call centers since I currently workin in
one and because they utilize this application extensively. Call centers are the preferred way for many
companies to communicate with their customers. The call center industry is vast, and rapidly
expanding in terms of both workforce and economic scope. It is estimated that 3% of the U.S. and
U.K. workforce is involved with call centers. In addition the call center industry enjoys a annual
growth rate of 20% and, overall, more than half of the business transactions are conducted over the
phone. (A. Mandelbaum, 2001) In basic models of call centers it is commonly assumed that the only
parameters under the system manager's control are the number of trunks available (K + N) and the
number of agents (N). In most contexts the cost of trunk lines is trivial compared to personnel costs,
so in this paper we focus on staffing decisions (N), assuming that K = ∞ for modelling purposes.
Thus busy signals are absent in the models to be considered. The classical M/M/N queueing model,
also called the Erlang–C model, is obtained by further assuming Poisson arrivals, exponentially
distributed service times and no abandonment. It is the model most often used in call center analysis.
(O. Garnett, 2002) In probability theory, a Poisson process is a stochastic

Description Of A Good Friend
Dearest Good Friend,
After having taken an entire course dedicated to design, I think that I ought to pass on some of the
information I learned in the form of some oh–so–friendly advice. Although you, my good friend
who has been seriously considering going into design for some time, may already know a bit about
design, I thought it a good idea to let you know about what a few of the sources I have been reading
have to say about being a designer. Also, I wanted to let you know what these sources say in regard
to the place of designers and of designers work in the larger society. Unfortunately, I will not be able
to give you the full run down, but I have chosen the best just for you. Jumping ahead a bit to my
summary of findings, I found that designers have special responsibilities–– lot of them. They have
to think about the people with which they work, the consumers of their designs, the manufacturers
of their designs, and the nature of the material with which they work. Also, design should not be
thought of as a way in which people show mastery and control over the world. To do this is a bad
idea because it can have a negative impact on a person's morals. Now that I have given you an
overview of my findings, I will let you know more about how I came to these conclusions.
In deciding whether designers have any special responsibilities, I found the articles "A Buddhist
Perspective on Industrial Engineering and the Design of Work" by Wei–Tau Lee, James A.
Blumenthal, and

Sandvik : An Industrial Engineering And Manufacturing Company
Section 1: Overview
(a) Research Information
Sandvik is an industrial engineering and manufacturing company that serves several markets such as
materials technology, tooling, construction and mining. The company was founded in 1862 by
Göran Fredrik Göransson. Headquartered in Stockholm, Sweden, Sandvik has approximately 48,000
employees with a presence in more than 130 countries. Major operations of the company are in
United States, Germany, Australia and China. The company operates primarily through five business
segments: Sandvik Construction, Sandvik Materials Technology, Sandvik Mining, Sandvik
Machining Solutions, and Sandvik Venture.
I have not been employed at Sandvik; however, I have a strong interest to work in Sandvik Materials
Technology segment because of its focus on continuous innovation and adoption of innovative
technology.
According to the company website, Sandvik's vision is based on innovation, technology leadership
and close, long–term customer relationships. Sandvik has a strong organizational culture that is built
on an innovative climate where all employees can contribute to the success of the company and
where ideas and innovations are strongly encouraged. The company aims at creating an inspiring
work environment with motivated employees that contributes successfully with their own
experiences and expertise. Additionally, Sandvik encourages leadership behavior and organizational
practices that promote learning. From the interview, I also learnt

Essay about Operation Process at VBA
Operation process at VBA
INTRODUCTION
¡§The Design, setting up, operation, and continuous evaluation of internal and external systems that
deliver a product or a service to the customer is called Operations Management.¡¨(Alan Carroll,
2003)
According to Slack et al, All Operations processes takes in a set of input resources which are then
used to transform something, or are transformed themselves, into outputs of goods and services
which satisfy customer needs. This is described by transformation process model.
All operations manager are designers. Design in Operations management refers to the conceptual
process by which customers' needs are satisfied through the use of a product or system, which
derives from the physical ... Show more content on Helpwriting.net ...
Quality has been the primary objective in the designing of the VBA process. It is basically an error
free process. In other words it¡¦s a ¡¥world class operation¡¦. The operation is very complex and
large but is held together by information processing technology. VBA follows Self–monitoring plan,
which increases the reliability of the information regarding the quality of flowers. One of its
principle is that supplier themselves are responsible for providing reliable information. VBA staff
supports the suppliers through guidance and targeted inspection. Quality inspectors inspect on the
basis of the reliability index of the suppliers. This index is formed on the basis of past accuracy of
the information provided by the suppliers. So it detects any error that can occur regarding the quality
of flowers within the operation itself.
DEPENDABILITY– ¡¥means doing things in time for customers to receive their goods when they
were promised.¡¦
For VBA operation dependability is very critical again because of the perishable nature of flowers.
VBA staff ensures the quality and that leads to Dependability. VBA uses high level of
computerisation and automation of material that allows it to operate at high dependability levels.
VBA process ensures those flowers reach shops all around Europe on the same day and to other
parts of the world on the next day.
All these objectives are critical in the design of VBA process at present however in future

A Study On The Industrial Design / Engineering Program Essay
Gloria, Kenya, Wendee, and I had a chance to interview a full–time faculty, Shelley Takahashi, at
Mount San Antonio Community College. She has been working at this community college for
almost two full years teaching Industrial Design/Engineering. She shared that she is motivated to be
on a college campus everyday as she interacts with students and see them grow in the field of
industrial design. One interesting thing about her industrial design/engineering program is that it is a
cohort model where students take the same classes throughout their time at the community college.
She mentioned how rewarding it is to see students grow and mature together in the span of two
years and see them get full–time positions or transfer to four year universities after they finish the
program. She stated that her major roles and responsibilities as a faculty member is to teach classes,
participate in the Advisory Committee meetings to assess ways to improve the program, reach out to
local high schools to recruit students, and connect with different universities for articulation. She
also shared some of the workshops that she put together for students as she invited counselors from
her department to come to class to help students to write their resumes, practice interview skills, and
share internship opportunities in the field of industrial design. What shocked me during the
interview was when she told us that she was not too familiar with the roles of the student affairs; she

Statement For Mechanical Engineering
The constant urge to explore about things around me always motivates me to keep myself updated. I
believe that Mechanical Engineering was the perfect choice for me as it gave me the vast knowledge
of how the world around us works. My fascination for Industrial Engineering was cultivated in the
first year of my undergraduation. During my first industrial visit to Caparo Manufacturing Unit,
Sriperambudur, Chennai, I observed that one team was dedicated to analyse the product outcome
along with efficiency and another team was working on finding engineering solutions based on the
drawbacks, for optimisation. This drew my attention as I too have the tendency to find solutions.
This visit sparked my interest in this field, and I felt as if it represented my calling.
The faculty members at my college had telling influences in ensuring that I have a strong foundation
in my ... Show more content on Helpwriting.net ...
The fields that are important to me include investigation of analytical and computational methods
for optimisation or stochastic, including risk analysis, manufacturing, distribution, material
handling, and Quality control techniques.I am interested in getting into a job that completely focus
on problem solving, whether it's preparing for growth, performing cost analyses, establishing
workplace safety procedures, supply chain management, or modification to the assembly line. Some
of my dream companies are Siemons, Stantec, Shell and BP Global. My long term goal is to work in
the operations research field in manufacturing and production industry for development of different
technologies and to expose myself to different aspects of real life technologies used in industries. I
want to devote a part of my life by giving new real life technologies to public for their ease and
welfare and my knowledge for the development of

The Function Of Industrial Engineering Essay
CHAPTER 1 INTRODUCTION 1.1 INTRODUCTION In manufacturing sector, simulation is one
of the powerful solution for problem solving purpose. Simulation used in the modelling and analysis
of manufacturing systems are the one of largest application areas. Simulation become increasingly
important in the two of decades previously. The benefit attribute of simulation can be divided into
two categories where quantitative benefit and qualitative benefit. Quantitative benefits classify into:
operating cost reduction, throughput time, capital costs, design–to–market time and faster
implementation of plant changes. Then, qualitative benefits also typically inclusive of reducing of
risk, deep understanding of processes, communication improvement, great team integration and
great development of skills within the organization. Simulations allow variety of problem within the
manufacturing to be consigned without the disadvantage of experimenting with a real manufacturing
system. Most typical issues postmark are requirement for and the quantity of equipment and
personnel, performance consideration, and consideration of operational procedures. The function of
industrial engineering is function labeled working with people to do operations better, faster, safer,
save company money, earn profit and increase competitiveness. An industrial engineer make an
important contribution where saving money while making the proper workplace for employee.
Analyzing the job and workplace is one

Statement For MS Industrial Engineering
Program: MS Industrial Engineering Applicant Name: Venkatesh Manohar
Demand of both technical background and management capabilities are keeping me enthralled with
the field of industrial engineering. After twenty one months of industrial experience as Junior
Manager at JSW Steel Coated Products Ltd, I strongly feel that bachelor degree in mechanical
engineering is not sufficient for survival in this competitive field and hence I decided to explore
more by pursing MS Industrial Engineering at X Y Z.
My passion for engineering drove me to choose Physics, Chemistry and Mathematics at my high
school. After passing my high school examination with flying colors, I decided to pursue
Mechanical Engineering as my undergraduate major. I chose Mechanical because of its perfect
blend with many engineering fields such as Aerospace, Manufacturing, Industrial, Electronics and
what not. My undergraduate study was a judicious mix of core courses from various fields. I got
interested in industrial engineering after taking subjects like Engineering Economics and Analysis,
Operations Research, Manufacturing Planning and Control and Computer Aided Design and
Manufacturing.
My inclination drove me to do a project in quality control titled," Improving the Dimensional
Accuracy of Pump ... Show more content on Helpwriting.net ...
In the intermittent period my enthusiasm introduced me to a new concept viz 'Failure Mode and
Effect Analysis (FMEA)'. I have studied the fundamental principles of FMEA by discussing along
with my fellow classmates and professors. We also did two case studies on punching process and
sparkplug using FMEA principles. We got overwhelmed when both of our works got selected and
published in international journals (see my

Job Experience At College Graduates
Obtaining a job in today's society may seem difficult due to the ever increasing population of
college graduates promoting a healthy dose of competition, yet it will come naturally if one has
prior experience before obtaining a full–time job. In my current stage of being a senior without any
job experience before graduating will prove to be tough to find a company willing to hire someone
as such. Almost all of my friends have some sort of job experience both in either industry or in jobs
not related to engineering. I on the other hand privately do have job experience, but this is through a
small family business manufacturing custom window treatments. Ever since I was a young child,
many professors told me to not cite family as a credible source of job experience. I assumed this was
said in order to prevent those that simply place inane job titles on their resume when they in fact
worked or observed only five minutes of the job. My job was to assist my father in the
manufacturing of curtains, pillows and roman shades; occasionally installing the drapes in the
client's home with the profits going towards the family. Money going towards my family's funds has
led to me not have to file any taxes and "whatnot". Where "whatnot" is the miscellaneous papers that
I am not aware of in my current knowledge that's usually seen if one had a job. I have attempted to
place my work experience onto my resume as the section labeled "work experience" is left blank,
but the starting date looked

Statement Of Purpose For Industrial Engineering
In this letter of intent, I am going to focus on the purpose of studying Industrial Engineering further
at the post–graduate level. I have chosen University name because I feel it will best prepare me to
fulfill my future career objectives. I jot down my Statement of Purpose with due respect to the
Department and the University.
The boundless possibilities and prompt outcomes are what I find most energizing and alluring about
Industrial Engineering. I have a great interest towards the industrial environment and this is the
reason I am looking to pursue Master's in Industrial Engineering. The factor in the recent times is
that there have been huge changes in Design Engineering and Global Industrialization making the
position of an Industrial Engineer a very essential one. Being part of this rapidly flourishing
community has been my ultimate desire.
In order to reach perfection at its summit, it is of utmost necessity that ... Show more content on
Helpwriting.net ...
I have also got the chance to get a lot of insight into the processes of casting and welding. In my
final year I took Production Planning and Control & Maintenance Engineering as my elective so that
I could get initiated into the field. I got to know the basic operations of different mechanical systems
of the automobile like the I.C. engine, brakes, clutches, powertrain, transmission and differentials. A
Master's degree would allow me to delve deeper into individual aspects of Industrial Engineering by
studying and examining them in greater detail and gain practical experience by way of relevant
internships. Hence Master's in Industrial Engineering became an obvious necessity.
I have vastly benefitted from the breadth of Anna University's undergraduate syllabus and gained a
widespread exposure to many core areas of the field and conceptual understanding. In my under–
graduate study, I have learnt how to maintain an expending self–governing approach in all my

The Importance Of Teachers And Classmates At The...
The author would like to acknowledge the contribution of lecturers and classmates in the
Department of Industrial and Manufacturing Engineering. Great appreciation goes to my Supervisor
Eng.W.M Goriwondo who helped me through the project. The author wishes also to express her
sincere gratitude to Marange Resources team for its support. Author's family also provided material
and spiritual support that helped her through life. Finally, the acknowledgement is due to the
Almighty who has blessed the author with the knowledge, required for doing this project.
ABSTRACT
During diamond recovery process, Ferrosilicon density control is very crucial. It determines the end
product quality. Density of Ferrosilicon should be kept high (2.45–2.65 SG) so that there will be less
fraction of unwanted material on the end products and high percentage of diamond. The project
highlights the aims, objectives, and background related to the design of the design of a density
control system and optimisation system of Ferrosilicon on a Dense Medium Separation (DMS)
plant. Literature review included an in–depth look into dense medium separation (DMS) plant
process, Ferrosilicon density control, Ferrosilicon recovery system and Genetic Algorithm. The
various concepts for the density control system were developed. Each presented and its associated
advantages and disadvantages in case of implementation. The best control concept selected uses the
programmable logic controller (PLC). The sections to form

Engineering : An Essential Pillar For Industrial And...
Engineering has always been an essential pillar for industrial and technical development.
Engineering is what keeps our people moving and up–to–date with technology. It is a satisfying
career, both financially and mentally. The objective of this assignment is to interview a practicing
Engineer who has worked or is working in the area of project management. This assignment
provides a glance for future engineers into the daily routine of a professional and experienced
Engineer, and the approach he/she pursued in order to arrive at the position they presently occupy.
I recently interviewed Saeed Salim, a project manager at Al Barrak Electrical Contracting Company,
located in United Arab Emirates, Abu Dhabi. Saeed is my dad's friend. On ... Show more content on
Helpwriting.net ...
He was supervising the installation of overhead lines and high voltage substations. Everything was
new for him, and he had to adapt to the various changes he encountered in U.A.E.
After ten years of working in the Water and Electricity department, Saeed received another job offer
in a private company named AL Barrak Electrical Contracting Company, where he was offered a
project manager position, which is his current position as well. He was more comfortable working
with the second company, as this opportunity allowed him to combine the technical aspects of a
position with management duties. Working in Al Barrak, he is capable of designing, maintaining and
developing electrical control systems and components to certain specifications, concentrating on
economy, quality, and sustainability. He is involved in projects from the idea and detail of the
specified design through to implementation, testing and handover. He is also involved in projects
that require people in his field to work as a team. The team would usually include engineers from
other specialist areas, as well as marketing staff, technicians and manufacturers. He sometimes
works with representatives from client organizations.
Working in a different company, Saeed had to take a bigger responsibility and work harder to prove
himself and show that he is capable of facing

My Statement Of Purpose For Industrial Engineering
I always wondered, "what can be the substantial foundation of success in people's lives"?
Throughout my life I came to realize that finding interests and passions is the most important aspect
of every human life which eventually makes him feel positive and satisfied with himself.
Furthermore, since this specific field is highly desired by that person, he can reach to significant and
tremendous success by supplementing his dreams with perseverance and hard work. Ever since I can
remember, I have always been a perfectionist, and it has been the sole impetus that has incentivized
me over the years in my life alongside a strong educational and ethical philosophy that has been
professed by my dear teachers and professors. I have always been interested ... Show more content
on Helpwriting.net ...
In order to find the right graduate program which can address my interests and match my
educational goals, I studied many different universities and came to believe that The University of
Alabama in Huntsville provides me with a marvelous opportunity and makes me very enthusiastic to
learn from and collaborate with the great academics there. I am confident that given my background
in Industrial Engineering as well as my teaching experience, I have the potential to prove an asset to
your graduate program, both as a successful student and as an efficient assistant with teaching or
research duties. I hope that with the help of great scholars there, I will be prepared to contribute to a
better understanding in this

Statement Of Purpose For Production Engineering
"Engineers make things, but industrial engineers make things perfect", and embedded in my heart is
a deep desire to achieve perfection. I not only wish to contribute to the field of engineering, but also
wish to do it as efficiently, economically and orderly as possible. In my frequent visits to my father's
fabrication unit, I noticed two kinds of people– ones on the shop floor operating the machines and
others who worked on operating these machines efficiently by optimising the various processes
involved. The latter invoked something in me. I was fascinated at the way they derived optimal
solutions by a thorough understanding of the production systems. That made me want to pursue
Production Engineering as my undergraduate major and I got into the Government College of
Technology, Coimbatore– an institute with a good repute.
In an atmosphere that facilitates learning via a judicious mix of theory, practice, as well as extra–
curriculars, I have been acquiring myself a holistic skill set– technical, managerial and
communicative. An in–born aptitude for mathematics and a strong mathematical foundation have
also had a profound impact on my overall performance in college and on my interest in various
courses under my major. If there is one thing I learnt from projects and events I organised, it is ...
Show more content on Helpwriting.net ...
But education is incomplete without a post graduation under a specific area of expertise. In my
graduate study I aim to acquire skills that would help me adjust to technological shifts and also give
myself opportunities to explore advanced engineering problems and thereby make as much original
contribution as I can, to the field of Industrial Engineering. As part of my graduate research, I would
like to be involved in the areas operations research and game theory under Professor Dr. Jun
Zhuang, whose research interests closely match with

Improving Quaity of Services in KENIKA Enterprises Essay
1. Objective(s):
This study aims to apply basic knowledge in Advanced Operations Research through the use of
Queuing system
2. Intended Learning Outcomes (ILOs):
The students shall be able to:
2.1 Analyze the existing operations of the selected company
2.2 Apply Advanced Operations Research techniques to the identified problem(s) or goal(s).
2.3 Communicate problems and solutions through written and oral presentation
.
3. Discussion
This paper is a Case study on how principles of Operations Research will be applied to improve the
Quality of Service in Material receiving Area in KENIKA Enterprises. In KENIKA Enterprises in
Pampanga, all vehicles with raw materials comes to front gate. These trucks are tested for presence
of ... Show more content on Helpwriting.net ...
Procedure
1. KENIKA Enterprises Materials Receiving System
2. Eliminate the queuing time in all server in KENIKA
3. 37 tucks were accommodated in 8 hours of service
4. The queuing system theory
6. Data and Results: First server gate a accommodated 37 trucks it took 14.3% delay, Second server
which is the queue between CRS and Security took 6.1% delay, Security checking took 0.3% delay,
Weightment took 30.9% delay, Movement between store took 28.8%, Unloading materials in store
took 10.5% delay and Exit weightment and Checking took 9.1%.
TREATMENT OF DATA
arrival rate 
service rate
Arrival time = 1/arrival rate
Service time = 1/service rate
Inter–arrival time between services
Inter–arrival time between services are 1.144, .488, .024, 2.472, 2.304, .84, and .728
The service time for the channels are:
 =1/1.144 = 0.87

 =1/.488 = 2.05
 =1/.024 = 41.67
 =1/ 2.472 = 0.40
 =1/ 2.304 = 0.43
 =1/ .84 = 1.19
 =1/ .728 = 1.37
Arrival time for the channels are:
1/ 1.144 = 0.87
1/ 0.656= 1.52
1/ 0.464 = 2.155
1/ 2.448 = 0.408
1/ 0.168= 5.95
1/ 0.68 = 1.464
1/0.112= 8.92
We can see that the longest service time is the lowest in arrival rate that is the server or channel 4.
Additional formulas used in queuing systems
Response time
Mean response time R E(r) = (
Variance of the response

Nike Inc. Case Study

More Related Content

Similar to Nike Inc. Case Study

More from Olga Bautista

Recently uploaded

Nike Inc. Case Study