Nasir Siddique has over 10 years of experience in non-destructive testing (NDT) and inspection of oil and gas infrastructure. He holds certifications in pressure vessel inspection, above ground storage tank inspection, and NDT techniques. Siddique has worked as a technical manager and inspection engineer conducting visual inspections and NDT on equipment for various oil and gas companies in Pakistan and the UAE. He is proficient in NDT equipment and techniques including magnetic flux leakage testing, phased array ultrasonic testing, and visual inspections.

1. Page 1 of 9
CURRICULUM VITAE
NASIR SIDDIQUE
Tel:
Mobile:
E-mail:
Skype ID:
Objective:
To seek and strive in a highly motivated and professional working environment where my experience,
strong aptitude for learning, presentation and analytical problem solving techniques and abilities would be
utilized to improve technical skills.
Education:
 Master degree (M. Sc) in Petroleum Technology from University of Karachi. Year 2009
 Bachelor degree in Science (B. Sc) from University of Karachi. Year 2007
Certifications:
 Certified Pressure Vessel Inspector (API 510) Cert. ID. 54931
 Certified Above Ground Storage Tank Inspector (API 653) Cert. ID. 43808
 Certified ASNT level II in UT, MT and PT
OEM Certifications:
 Certified (MFL 2000) Magnetic Flux Leakage (Silverwing, UAE)
 Certified (FloorMap 3D) Magnetic Flux Leakage (Silverwing, UAE)
 Certified (Pipe Scan) Magnetic Flux Leakage (Silverwing, UAE)
 Certified (Hand Scan) Magnetic Flux Leakage (Silverwing, UAE)
 Certified Auto UT Scorpion B. Scan (Silverwing, UAE)
 Certified (RMS) Rapid Motion Scanner (Silverwing, UAE)
 Certified Thetha Scan (Silverwing, UAE)
Codes & standards Familiarity:

 API Standards (653, 650, 510)
 API RP (575, 651, 652, 577, 571, 572 & 576)
 ASME (B31.3, Sec. VIII Div. 1, 2, IX & V)
 AWS (D1.1, D1.6)
 Code case 2235-9, B 31 case 181
+92 21 34911833
+92 323 2096896
mnasirsiddiq@hotmail.com
Mnasirsiddiq

2. Page 2 of 9
Familiar with ISO Standard
 Acquaintance with ISO 9000 and 17020 series / Documentation & Procedures.
Professional experience:
Reliance Swift Veritas (RSV), ISO 17020 certified organization
Organization type: Plant Inspection, NDT, Corrosion Control and Mechanical Integrity
Position: Technical Manager
Duration of Work: January 2015 to Present
Clients:
United Energy Pakistan (UEP) formerly British Petroleum Pakistan (BPP)
Byco Petroleum Pakistan Ltd
Pakistan State Oil Company (PSO)
Pakistan Refinery Ltd (PRL)
Pak Arab Refinery Ltd (PARCO)
Pak Arab Pipeline Company (PAPCO)
Karachi Electric Supply Corporation (KESC)
Dewan Petroleum Ltd (DPL)
Lalpir power Ltd
Reliance Swift Veritas (RSV), ISO 17020 certified organization
Organization type: Plant Inspection, NDT, Corrosion Control and Mechanical Integrity
Position: Assistant Technical Manager
Duration of Work: February 2014 to December 2014
Duties and Responsibilities
 To carry out internal & external visual inspection of static equipments
including pressure vessels, heat exchangers, coolers, columns, furnaces,
stacks and tanks etc.
 To Apply / supervise Magnetic Flux Leakage (MFL).
 On stream and off line inspection of Safety Critical Equipments (SCE)
including Contactors, Heat Exchanger and Columns as identified by Risk
Based Inspection Methodology using ToFD Technique.
 Technical study and selection of conventional and advanced NDT
equipments.
 Developments of company’s NDT procedures.
 Review of WPS, PQR, WPQT, NDT, PWHT procedures & qualification of
NDT technician.
 Training of NDT personnel in accordance with SNT-TC-1A.
 Ultrasonic flaw detection (UFD).
 To Witness Destructive tests i.e. Hardness testing.

3. Page 3 of 9
 To supervise conventional NDT Methods i.e. Dye penetrant testing,
Magnetic Particle testing, UT thickness monitoring and vacuum Box
testing.
Clients & Projects:
United Energy Pakistan (UEP) formerly British Petroleum Pakistan (BPP)
Annual / Ongoing Client:
 Carry out thorough visual inspection complemented with NDT
examination on pressure vessels, heat exchangers, fin fan coolers, fired
heaters, process piping systems, well head assemblies, oil/gas gathering
clusters, pipelines and above ground storage tanks as per planned
frequency to assure the mechanical integrity.
 Selection of an appropriate inspection/NDT techniques as per
codes/standards and specification.
 Inspect any completed repairs, modifications and/or replacement.
 Retirement thickness calculation, corrosion rate calculation, remaining
service life calculation for process equipments and advising for any
repairs/replacement/re-rating requirements.
 Development of inspection plans/frequencies.
 Preparation of inspection reports with all findings, abnormalities and repair
recommendations.
 Identifying areas of special concern and deterioration (e.g., dead legs,
injection points, buried piping, corrosion under insulation (CUI), erosion &
corrosion/erosion).
 Assist and participate in RBI analysis and developing the inspection
plans/frequencies for static equipments, piping and pipelines.
 Witnessing of pressure relief valves calibration and testing.
 Ensure full compliance with company safety regulations and HSE
management systems.
Other Major Clients:
Byco Petroleum Pakistan Ltd
Pakistan State Oil Company (PSO)
Pakistan Refinery Ltd (PRL)
Pak Arab Pipeline Company (PAPCO)
Karachi Electric Supply Corporation (KESC)
Silverwing Middle East LLC (SWME)
Organization type: Specialized NDT Equipment Manufacturer / Advanced NDT and API Services.
Position: NDT / API Inspector
Duration of Work: July 2013 to February 2014
Duties and Responsibilities
 To carry out internal & external visual inspection of above ground steel
storage tanks as per API codes and standard.
 To prepare inspection reports with all findings, abnormalities, repair
recommendations and next inspection frequency and life calculations.
 To operate / supervise own manufactured equipments including Floor
Map, Floor Map 3D, Hand Scan, Pipe Scan, Auto UT Scorpion B. Scan
and RMS, Tetha Scan and lesser alignment equipment.

4. Page 4 of 9
 To supervise conventional NDT Methods i.e. Dye penetrant testing,
Magnetic Particle testing, UT thickness monitoring, UT flaw detection and
vacuum box testing.
 To provide In house and external calibration and maintenance services.
Clients & Projects:
Vopak Horizon Fujairah Limited (VHFL)
Short Term Project
 Carried out External Inspection of 22 Nos above ground storage tanks
(Floating Roof) having diameter ranges from 20 m to 55 m as per planned
frequency to assure the mechanical integrity.
 Reviewed plumbness, Roundness and Settlement data conducted by
SWME survey team and recommendations for same on the basis of
result.
 Reviewed past inspection reports and repair history.
 Inspect any completed repairs, modifications and/or replacement.
 Retirement thickness calculation, corrosion rate calculation, remaining
service life calculation for process equipments and advising for any
repairs/replacement/re-rating requirements.
 Development of inspection plans/frequencies.
 Preparation of inspection reports with all findings, abnormalities and repair
recommendations.
 Ensure full compliance with company safety regulations and HSE
management systems.
Vopak Horizon Fujairah Limited (VHFL).
Annual / Ongoing Client:
 Carried out External and Internal Inspection of above ground storage
tanks (Floating Roof) having diameter ranges from 20 m to 55 m as per
planned frequency to assure the mechanical integrity.
 Bottom Inspection by utilizing Magnetic flux leakage (Floor Map, Hand
Scan and Manual Mode).
 Performed and review the results of plumbness, roundness and
settlement data by Utilizing Laser Alignment Technique.
 Supervision of a team of inspectors and multi-disciplined NDT
personnel’s.
 Retirement thickness calculation, corrosion rate calculation, remaining
service life calculation for process equipments and advising for any
repairs/replacement/re-rating requirements.
 Development of inspection plans/frequencies.
 Preparation of inspection reports with all findings, abnormalities and repair
recommendations.
 Ensure full compliance with company safety regulations and HSE
management systems
Horizon Jebel Ali Terminal Ltd.
Annual / Ongoing Client:
 Carried out External and Internal Inspection of above ground storage
tanks (Fixed Roof) having diameter ranges from 20 m to 30 m as per
planned frequency to assure the mechanical integrity.

5. Page 5 of 9
 Bottom Inspection by utilizing Magnetic flux leakage (Floor Map, Hand
Scan and Manual Mode).
 Performed and review the results of plumbness, roundness and
settlement data by Utilizing Laser Alignment Technique.
 Supervision of a team of inspectors and multi-disciplined NDT
personnel’s.
 Retirement thickness calculation, corrosion rate calculation, remaining
service life calculation for process equipments and advising for any
repairs/replacement/re-rating requirements.
 Development of inspection plans/frequencies.
 Preparation of inspection reports with all findings, abnormalities and repair
recommendations.
 Ensure full compliance with company safety regulations and HSE
management systems
Reliance Swift Veritas (RSV), ISO 17020 certified organization
Organization type: Plant Inspection, NDT, Corrosion Control and Mechanical Integrity
Position: Inspection Engineer / API Inspector
Duration of Work: July 2010 to April 2013
Duties and Responsibilities
 To carry out internal & external visual inspection of static equipments
including pressure vessels, heat exchangers, coolers, columns, furnaces,
stacks and tanks etc.
 To Apply / supervise Magnetic Flux Leakage (MFL).
 On stream and off line inspection of Safety Critical Equipments (SCE)
including Contactors, Heat Exchanger and Columns as identified by Risk
Based Inspection Methodology using ToFD Technique.
 Technical study and selection of conventional and advanced NDT
equipments.
 Developments of company’s NDT procedures.
 Review of WPS, PQR, WPQT, NDT, PWHT procedures & qualification of
NDT technician.
 Training of NDT personnel in accordance with SNT-TC-1A.
 Ultrasonic flaw detection (UFD).
 To Witness Destructive tests i.e. Hardness testing.
 To supervise conventional NDT Methods i.e. Dye penetrant testing,
Magnetic Particle testing, UT thickness monitoring and vacuum Box
testing.
Clients & Projects:
United Energy Pakistan (UEP) formerly British Petroleum Pakistan (BPP)
Annual / Ongoing Client:
 Carrying out thorough visual inspection complemented with NDT
examination on pressure vessels, heat exchangers, fin fan coolers, fired
heaters, process piping systems, well head assemblies, oil/gas gathering
clusters, pipelines and above ground storage tanks as per planned
frequency to assure the mechanical integrity.

6. Page 6 of 9
 Selection of an appropriate inspection/NDT techniques as per
codes/standards and specification.
 Inspect any completed repairs, modifications and/or replacement.
 Retirement thickness calculation, corrosion rate calculation, remaining
service life calculation for process equipments and advising for any
repairs/replacement/re-rating requirements.
 Development of inspection plans/frequencies.
 Preparation of inspection reports with all findings, abnormalities and repair
recommendations.
 Identifying areas of special concern and deterioration (e.g., dead legs,
injection points, buried piping, corrosion under insulation (CUI), erosion &
corrosion/erosion).
 Assist and participate in RBI analysis and developing the inspection
plans/frequencies for static equipments, piping and pipelines.
 Witnessing of pressure relief valves calibration and testing.
 Ensure full compliance with company safety regulations and HSE
management systems.
Asia Petroleum Ltd (APL)
 Third party inspection (TPI) of stationary equipments (Day tanks, above
ground Storage tanks (Ф 30 ft, 30 ft height), De-aerator, Air vessel and
Heat exchanger) installed at Pipri terminal.
 Application of magnetic flux leakage (MFL) on tank bottom.
 Selection of an appropriate inspection/NDT techniques as per
codes/standards and specification.
 Supervision of a team of inspectors and multi-disciplined NDT
personnel’s.
 Retirement thickness calculation, corrosion rate calculation, remaining
service life calculation for process equipments and advising for any
repairs/replacement/re-rating requirements.
 Development of inspection plans/frequencies.
 Preparation of inspection reports with all findings, abnormalities and repair
recommendations.
 Ensure full compliance with company safety regulations and HSE
management systems
Tuwairqi Steel Mills Ltd
 Remote visual inspection (RVI) of Centrifugal gas compressor’s shafts
and impellers at TSML site, Bin Qasim, Karachi by utilizing GE Everest
XLG3 probe system.
 Preparation of report with suggestions and recommendations.
Pakistan State Oil (PSO)
 Third party inspection (TPI) for fixed cone roof storage tanks (Ф 60 ft, 24 ft
height) installed at PSO Oil terminal, Sihala Islamabad.
 Application of magnetic flux leakage (MFL) on tank bottom.
 Selection of an appropriate inspection/NDT techniques as per
codes/standards and specification.
 Supervision of a team of inspectors and multi-disciplined NDT
personnel’s.
 Retirement thickness calculation, corrosion rate calculation, remaining
service life calculation for process equipments and advising for any
repairs/replacement/re-rating requirements.
 Development of inspection plans/frequencies.
 Preparation of inspection reports with all findings, abnormalities and repair
recommendations.

7. Page 7 of 9
Attock Cement Pakistan Limited (ACPL)
 Perform ultrasonic flaw detection (UFD) of mechanical parts / items
includes: supporting roller shafts (approx length, 2.7 meters), pinion
shafts, hammer breaker shafts, clinker breaker shafts, vent fan shafts,
Drive cooler shafts, Limestone crusher hammers and Raw mill trunnions.
 Flaw evaluation as per ASME Sec. V.
 Prepare comprehensive technical reports.
Dewan Petroleum Ltd (DPL):
 Supervise pipeline integrity inspection for on-stream process piping at
salsabil gas plant taunsa, Multan.
 Evaluate and interpret UT thickness data; calculate the corrosion rate and
remaining life of each piping circuit based on the provided design data by
DPL.
 Prepare technical report under supervision of API 570, Authorized piping
inspector.
National Refinery Ltd (NRL):
 Perform Ultrasonic flaw detection (UFD) of Hydrogen vessel’s
circumferential and longitudinal weld seams.
 Supervise and evaluate the results of MPI and DPT.
 Prepare technical report under supervision of Sr. NDT inspector.
Saif Energy Ltd (SEL)
Organization type: Oil and Gas Exploration Company
Position: Trainee Engineer
Duration of Work: December 2009 to June 2010
Duties and Responsibilities:
 Coordinate as company’s representative for third party inspection and
maintenance services.
 Coordinate as company’s representative for auditing drilling inventory.
 Forward inspection and maintenance reports to head office.
 Involved in procurement activities.
 Facilitate branch manager on all office issues.
NDT Equipments Familiarity:
 Olympus OMNI Scan MX UT 8 channel (ToFD with pulse echo)
 Silverwing - FloorMap 3D
 Silverwing MFL 2000 (Tank Bottom scanner)
 Silverwing - Theta Scan
 Silverwing - PipeScan
 Silverwing - Auto UT Scorpion B-Scan
 Silverwing - Auto UT Rapid Motion Scanner
 Silverwing – HandScan
 Sokkia Total Station SET530RK
 GE Everest XLG3 Video probe system (Boroscope)
 Olympus Glider XY Scanner (Corrosion Mapping)
 MODSONIC Einstein-II DGS ,MITECH MFD350B (Ultrasonic Flaw Detectors)

8. Page 8 of 9
 DMS 2, MG2-XT, DM4, MVX, TG4100. (Ultrasonic Thickness Gages)
 Elcometer 211, Dry and wet paint (protective coating) thickness gauges
 Magnaflux MPI (YM5,YM7) yokes
Computer Literacy:
 Well Aware in almost all packages of MS Office Suite especially MS Excel, MS Word, MS Power
Point.
 Have command in comprehensive technical report writing.
 Internet Applications.
 Digital Media Diploma Holder.
Country Visited:
 Dubai
 KSA
Personal Information:
Father Name: Muhammad Siddique
Date of Birth: 3rd July, 1985
CNIC: 42201-6134579-3
Passport No: DL9825791
Nationality Pakistani
Marital Status: Married
References:
References will be gladly furnished upon request.