Babbu Jakir Hussain has over 18 years of experience as a structural and piping QA/QC inspector on various oil and gas projects. He has worked on FPSOs, jack-up rigs, and subsea tree projects. Some of his responsibilities include monitoring fabrication and ensuring work is done according to standards, reviewing welding and inspection procedures and qualifications, witnessing tests, and issuing completion documentation. He is a Senior Welding Inspector with certifications in radiography, ultrasonic testing, and other non-destructive testing methods.

1. BABBU JAKIR HUSSAIN
Structural and Piping QA/QC inspector
CV updated on 13//11/2015
Page 1 of 7
RESUME
BABBU JAKIR HUSSAIN.
Nationality-Singaporean
Avenue 5, Blk 483, Cho Chu Kang Ave 5 #06 – 166,
Singapore – 680483.
Mobile +65-90085319 and 90024786
jakirsuryaa@yahoo.com.sg
linkedin-babbujakir hussain
-------------------------------------------------------------------------------------------------------------------
Introduction: More than 18 years’ experience and More than 14 years’ experience in Structural and
Piping Construction of FPSO , X mass tree(subsea)and Jack Up rig projects for Main hull
fabrication, ,offshore/onshore Process Modules fabrication, assembly and erection , turret structure,
process pipe rack structure,spread mooring structure, modification of cargo tanks ,Living Quarter
fabrication, leg well and spud cane fabrication , assembly &erection of Panton blocks and nodes,
involve piping inspection for various system (process and marine) and handling various type of
material .Working as a Projects QA/QC inspection (Structural and piping) ensure the quality records,
acceptance certificates ,mechanical completion certification and the documentation for the specific
system in accordance with the projects requirements, review suppliers inspection and test plans
against to scope of work, resolve any discrepanciesbetween the completed items and quality
documentation.
Provide progressinformation for incorporation into projects reports, witnessed and monitor hydro
static test, monitor and control the status of punch list, attend the weekly projects meeting with
QA/QC team, Interpretation of test results to AWS, ASME, ASTM and API standards & project
specifications and class for structural and piping. Reviewthe Quality documents of
ITP/WPS/PQR/WPQRS, Specification, Drawings, Material certificates,Material tractability for
structural and piping, Perform Surveillance during fabrication and erection to compliance with
procedures, raise Non-conformance report (NCR)/Field Inspection Report (FIR) where applicable
and ensure satisfactory close out. Coordinate with the site managers for the completion of as-built
documentation.
Supervision of welding activities for Duplex (SA 790 UNS S 31803 ), Super Duplex pipe (SA 790
UNS S32750),API 5L/X52, TP316/TP304 and its Low Carbon Content TP316L/304L, SA 333 LTCS,
CuNiFe1.6Mn (90/10), and Plate Materials in ASTM/ ABS Standards includes High Tensile Steels
AH32, DH32, EH32, AH36, DH36, EH36,EQ56 and alloy steel 517-4130 for FPSO, ship building
and repairs.
Witness & approval of WPQT and WQT for GTAW, FCAW, GMAW, SAW and SMAW processesfor
structural and piping
Sound Knowledge of various Non-destructive test methods like RT,UT,MT AND PT

2. BABBU JAKIR HUSSAIN
Structural and Piping QA/QC inspector
CV updated on 13//11/2015
Page 2 of 7
Education:
Bachelor Degree in Science
Technical summary:
Senior Welding Inspector- CSWIP 3.2.2(Level 3) with Radiography interpreter-
Awarded by the Welding Institute – UK- Valid till 2019 Feb
ASNT Level II in RT, UT, PT and MT
Tech weld - Technician Member by TWI
Singapore NDT Society
Janwary2015 to till to date
Company : Japan drilling corporation
Project : Jack-up rig projects-Pacific class 400drilling unit
Position held : Project supervisor for structural and piping and NDE
Responsibilities & Duties:
Monitoring & inspection of execution of Steel Structure works pertaining to Main hull structure ,
spud can structure, leg well structure , upperguide with braces/jack frame structure and lower guide
structure, jack case structure, cantilever and drill floor structure, accommodation structure and leg
bracing structure , attending to RFI’s raised by Concerned at various stages of inspection and for
various activities ( Material verification, shop fabrication, Block assembly , erection tank inspection,
air test, vacuum test and hose test, Pad Plate inspection, Fit-up & Welding,NDE inspection
Monitor all piping(class I,II and III) construction activities from pre fabrication of spools throughout
to field installation, line walk down, testing, reinstatement activitiesand ensure all activities are
executed in accordance with the appropriate standards, proceduresand the schedule. Witness and
Hold point inspections in accordance with the approved Inspection & Test Plans. Review AFC
drawing (P&ID, ISO and site arrangement) / Specification and Contractor's shop drawings.
Review and inspection of NDE techniques and reports for piping, hydrostatic test reports and
pneumatic reports,, chemical cleaning reports and Hot oil flushing reports, Hardness report and
PWHT reports
June2013to September 2014
Company : M3nergy.
Project : FPSO Nusantara for Bukit Tua field (Keppel benoi shipyard)
Position held : Project structural and piping& NDE supervisor
Responsibilities & Duties:

3. BABBU JAKIR HUSSAIN
Structural and Piping QA/QC inspector
CV updated on 13//11/2015
Page 3 of 7
Monitoring & inspection of execution of Steel Structure works pertaining to Main deck pipe rack
structure, main deck modification structure, cargo tank modification structure ,heli deck structure,
spread mooring structure, module support structure,accommodation modification structure and
attending to RFI’s raised by Concerned at various stagesof inspection and for various activities
(Material verification, shop fabrication, Block assembly , erection tank inspection, air test, vacuum
test and hose test, Pad Plate inspection, Fit-up & Welding,NDE inspection, gratings fixing, handrail
erection, etc). Release of Structure to preceding department afterinspection, issuing Punch list on job
completion and closing Punch list for final completion
Review and Witness Welding Procedures and WitnessWelders Qualification test and Materials
testing (charpy V-notch, tensile strength, hardness and macro test )as per code required or in
accordance with specifications, reviewinspection test plan, review the quality control and quality
assurance aspects to inspection of the contractor's quality assurance manual, quality control manual
and procedures, review AFC drawing / specification and contractor's shop, drawings, review
contractor's purchase inquiry documents, supervising of PQR & materials traceability before
Fabrication & installation and Welding Consumables.
Monitor and inspection for duplex stainless steel, austenitic stainless steel, processpipe lines, Top
side modules and Marine (Engine room, Pump room, Pipe rack, Main Deck, accommodation)
process piping,gas pipe lines, glass reinforced epoxy (GRE) piping, valves, mega structure and heavy
structural fabrications
Monitor all piping( processand marine) construction activities from pre fabrication of spools
through out to field installation, line walk down, testing, reinstatement activitiesand ensure all
activities are executed in accordance with the appropriate standards, procedures and the schedule.
Witness and Hold point inspections in accordance with the approved Inspection & Test Plans. Report
non conformities and improvement areas to the Piping Lead Construction Supervisor.
Interpret drawings and codes (plan, general arrangement drawings, joint connection details, P&ID,
iso, spool and general arrangement drawing) project spec.
Final documentation of piping Ensure Site queries, engineering modification Reviewthe As built
drawings.
Review and inspection of NDT techniques and reports, hydrostatic test packages and pneumatic
reports, , chemical cleaning reports and Hot oil flushing reports, Hardnessreport and PWHT reports
November 2012 to May2013
Company : Woodside.
Project : Great western Flank.(Subsea projects)
Position held : QA/QC Project supervisor
Project profile:
This is a X mass tree and WHP fabrication work for Great western flank field development
(Australia) fabricated by FMC and executed by Woodside
Responsibilities & Duties: Monitor and Inspect materials for wellhead equipment and
Christmas trees to ensure that Material agreed with the description shown in purchase order, part list
and drawing, Surface condition of material are satisfactory. Materials are traceable to mill

4. BABBU JAKIR HUSSAIN
Structural and Piping QA/QC inspector
CV updated on 13//11/2015
Page 4 of 7
certification by having the heat code or cast number affixed to each individual piece by hard
stamping or other means of marking acceptable to the Client. Review mill certificates to ensure that
the chemical analysis,mechanical properties and heat treatment conform to the manufacturers’
Material Specification, API and NACE specifications.
Review and ensure that welding procedures including repair proceduresapproval.
Witness and review welding procedure qualification on completion of procedure qualification all
documentation including mechanical test and hardness result (if required) .
Review welders’or operator’s qualifications to ensure they are qualified for the welding process and
material being used.
Witness qualification of welders or operators, on completion of this, all documentation including
non-destructive testing or mechanical test record signed and returned to vendor for retention as
records.
Involve visual and dimensional inspection for block valve, bonnets, tubing hanger and tubing heads
as per relevant official specification (API/ ANSI), manufacturers speciation ( Eg premium threads)
and any other threads specification as per purchaser order.
Witnessing for all the NDT test , Air test, Hydro pressure test, gas test ,drift test, function test, stack
up test, integration test and proof load test for X mass tree and WHP per relevant official
specification ( API/ ANSI), manufacturersspeciation.
Issue Inspection Release Note upon acceptance of equipment
June 2012 to October 2012
Company : Teekay corporation
Project : FPSO Cidade de itajai @Jurong shipyard
Position held : Project QA/QC Piping Inspector/supervisor
May 2011 to May 2012
Company : Petrofac.
Project : Berantai FPSO.(Keppel shipyard)
Position held : Project NDE and QA/QC Inspector
Responsibilities & Duties: Interpret drawings and codes(plan,general arrangement drawings,
joint connection details, P&ID, iso, spool and general arrangement drawing) project spec and RLE
work pack
Monitor and Involve inspection activities on piping and Mechanical for Marine and process module,
Witness and Hold point inspections in accordance with the approved Inspection & Test Plans,
Provide input to site team to avoid/resolve piping problems. Report non conformities and
improvement areasto the Piping Lead Construction Supervisor. ReviewPiping dimensional control
reports to ensure that tolerance requirements are met., Interpretation of test results to AWS, ASME,
ASTM and API standards and project specifications

5. BABBU JAKIR HUSSAIN
Structural and Piping QA/QC inspector
CV updated on 13//11/2015
Page 5 of 7
Monitor all piping construction activities from pre fabrication of spools through out to field
installation, line walk down, testing, reinstatement activities and ensure all activities are executed in
accordance with the appropriate standards.
Regular surveillance checking at site to ensure that all comments had appropriate corrective action
such as preservation requirementsand correct bolts as per project requirements during construction
stage, check that preservation status of equipment at site and storage area to ensure requirements of
vendor and project spec. Check the physical condition of anchor bolts and leveling of foundation
before erection of equipment’s as per vendor and project spec.
Involve on Piping Mechanical completion verification and handover (Pre Hydro test line walk ,Bolt
tensioning, Flushing / Hydro testing / Drying, punch list clearance & Re instatement ).
September 2010 to April 2011:
Company : Bluewater energy bv.
Project : Glas Dowr FPSO.(Sembawang shipyard)
Position held : QA/QC Project inspector
Responsibilities & Duties:
Monitoring and Inspection of various module structure (Turret and topside module/ pipe rack)
Welding fabrication and erection activities of the contractors in all phases of the work, review
approved ITP, quality plan & procedures.
Ensure that the fabrication and construction work is in accordance with company drawings,
specifications and regulatory classrequirements.
Inspect and certify fit-up and final visual of all welds of the fabricated and erected structure on
behalf of the company during and after construction.
Release of Structure to preceding department after inspection, to check all weld parameters adhered
to ensure safe working practices being upheld. Full participation in day to day activities of
fabrication and installation involved on the modules under construction .Issuing Punch list on job
completion and closing Punch list for final completion.
Monitor all piping construction activities from pre fabrication of spools through out to field
installation, line walk down, testing, reinstatement activities and ensure all activities are executed in
accordance with the appropriate standards,procedures and schedule ,witnessand Hold point
inspections in accordance with the approved Inspection & Test Plans. Provide input to site team to
avoid/resolve piping problems. Report non conformities and improvement areas to the Piping Lead
Construction Supervisor. Review piping dimensional control reports to ensure that tolerance
requirements are met.Participate along with piping construction team in weekly discipline meetings.
Review and evaluate Contractor’s records.Review Contractor’s and Suppliers’ completion files for
acceptance.
Carried out in field inspection for incoming material (plate, pipe, fittings,valves and strainers),
Joints assembly and final weld inspection as per code and project spec,
Witnessing, pneumatic,hose and vacuum test as per code and project spec

6. BABBU JAKIR HUSSAIN
Structural and Piping QA/QC inspector
CV updated on 13//11/2015
Page 6 of 7
Review and inspection of NDE techniques and reports, hydrostatic test packages (line walk, flushing,
hydro test, reinstatement and punch list) and pneumatic reports, , chemical cleaning reportsand Hot
oil flushing reports, Hardness report and PWHT reports.
Monitor the subcontractors for N2/He leak test activitiesand mechanical completion and ensure
these are executed in accordance with project HSC,technical specification, quality standard and
procedure defined in the contract.
To attend the technical discussion and resole technical querieswith construction team in quality
matters.
April 2010 to August 2010
Company : Woodside Energy limited.
Project : OKHA FPSO @Keppel shipyard
Position held : Project Piping Inspector/supervisor
April 2009 to March 2010
Company : Petroserv
Project : Dynamic producer FDPSO @ Sembawang shipyard
Position held : Project Structural / Piping supervisor
April 2008 to March2009
Company : Transocean.
Project : 706 DP3 Upgrading-Semi sub @Keppel fels shipyard
Position held : Project piping supervisor
Janwary2007 to March 2008
Company : Bluewater energy bv.
Project : AOKU MIZU FPSO@ Sembawang shipyard
Position held : Project Piping Inspector
Janwary2002 to December 2006
Company : Third party inspection agency ( Hi-Tech) Singapore
Project : Seconded to Sembawang and Kfels @ Singapore
Position held : Structural and Piping inspector
May1998 TO November 2001

7. BABBU JAKIR HUSSAIN
Structural and Piping QA/QC inspector
CV updated on 13//11/2015
Page 7 of 7
Company : Third party inspection agency .Singapore
Project : Keppel fels,Keppel singmarine,Hitachi zosen and sspl/smoe.singapore.
Position held : NDE/Welding inspector.
Janwary 1993 to March 1998
Company : Third party inspection agency .India
Position held : NDE Inspector
References:
Mr. Stuwart Brown
Construction Manager for Rathu Nusantara FPSO (Bukit Tua M3nergy)
Construction Manager for Cidade de itajai FPSO -Teekay corporation
HP +65-96621206
srbrown@singnet.com.sg
Mr. Colin Danby,
Topside construction Superintend for Bluewater- Aku mizhu FPSO &Glas Dowr FPSO,
Mobile: + 65- 92364731
fabricator41@hotmail.com
Mr. Brian Robbie,
Transocean - Sedco 706 DP3 project, , .
Mobile: +44 (0) 7771670717.
E-Mail:Brian.Robbie@deepwater.com