1. KASHIF MAQBOOL
Contract: +966591150140 & +966500162314
Email : kashif433404@gmail.com
Subject: Applied For Mechanical Inspection Specialist
Dear Sir,
With reference to the aforesaid subject, I would like to inform you I am Certified API 510/570/653/580/571/577
Inspector, Authorized ASME Inspector (Training completed), Welding CSWIP 3.1, BGAS-CSWIP Level 2, NDT
(UT, PT, MT, RT) Level 2, NEBOSH , LEAD AUDITOR ISO 9001:2008, OHSAS 18001:2007 ,EMS 14001: 2004
, OSHA safety trained. With graduate in Mechanical Engineering having experience of more than 10 years
connected to QA/QC & Inspection in Plant Construction Projects, Quality Control, Welding processes,
Mechanical, Material Processing offer myself as a candidate for the aforesaid subject. I have been presently
working as a Senior Mechanical Inspector in SADARA CHEMICAL PLANT.
I have worked under witnessing of various companies like Borouge (Abu Dhabi Polymer Company) ,Fertil
Ruwais Fertilizer Industries UAE, Technip (Mepi),ADGAS (DAS Island UAE), CBI/Gasco (Abu Dhabi) ,
Daewoo, Takreer (Abu Dhabi), Pakistan Petroleum Limited (pakistan),Attock Refinery Limited (Pakistan),ICI
Chemical Khewra (Pakistan).
I am well versed with all International Engineering standards, Industries Codes & Practices like ASME Section
I, VIII,V,IX, IV, II Part C,ASME B31.1 , B31.3 ,AWS D1.1
API510,570,653,572,574,575,576,578,571,577,650,651,652,580,610,618.ASNT NDT.
I am also familiar with Saudi Aramco Code lie SAEP/SAIC/SATR/ SAES etc. connected with Welding, Piping &
NDT.
I would be grateful if you would consider me, for the vacancy of appropriate position in your company. I would
welcome hearing from you.
Yours Truly.
Kashif Maqbool
Encl: resume

2. KASHIF MAQBOOL (MECHANICAL INSPECTION ENGINEER)
Email:kashif433404@gmail.com Cell # 0591150140 & +966500162314
Land: Jubail Kingdom of Saudi Arabia
ACADEMIC QUALIFICATION
MS / MPhill Total Quality Management
Institute of Quality Management & Technology, University of the Punjab Lahore, Pakistan.
Bachelor of Science in Mechanical Engineering
Institute of Mechanical Engineering and Technology, University of Engineering and Technology
Lahore Pakistan.
Current Job Position
Senior Mechanical Inspection Engineer (Current Position in Bureau Veritas KSA &
Working on SADARA CHEMICAL PROJECT
Carrier Objective
Seeking for a challenging Full-Time Mid Level career position (Executive Engineer/ Inspection
Specialist / Manager) which can fully utilize my educational background, technical skills and experience
of QA/QC & Inspection in Plant Construction Projects, Quality Control, Welding processes,
Mechanical, Material Processing in a fast track well-reputed organization or industry with an
environment that promotes original ideas encourages innovative works with corresponding
remuneration.
Multi-skilled & diligent team member, I possess strong technical & problem solving skills. Consistently
ensuring Quality & Safety Standards are maintained, I have ability to work at heights, in confined
spaces, remote areas and challenging condition. Confident I would make a great addition to your team.
I offer my 100% flexibility to work various rosters/ shifts ,with a proven track record of achievement in
coordination the activities of the crew and organizing their combined efforts to ensure all tasks are
carried out safely in accordance with approved company practices in a safe and efficient manner to
achieve the best results at all times.

3. PROFESSIONAL CERTIFICATIONS & LICENSES
Professional Certifications & Technical Skills
ASME AUTHORIZED INSPECTOR (A.I)
ASME AUTHORIZED INSPECTOR Training Completed (Bureau Veritas)
API Certifications
API 510 Pressure Vessel Inspector
License 53326 (Valid up to 2017)
API 570 Piping Inspector
License 56834 (Valid up to 2017)
API 653 Aboveground Storage Tank Inspector
License 63017 (Valid up to 2019)
API 571 Corrosion & Material Inspector
License 67877 (Valid up to 2019)
API 577 Welding Inspection & Metallurgy
License 67981 (Valid up to 2019)
API 580 Risk based Inspection Professional
Exam Attempted
API SIRE Source Inspector For Rotating Equipment
Exam Dec 2016
TWI Certifications
CSWIP 3.1 level II Welding Inspector
License 81123 (Valid upto 2017)
BGAS-CSWIP Grade 2 Painting Inspector
License 93654 (Valid up to 2018)
ASNT NDT LEVEL II Certifications
Ultrasonic Test Level II
SNT-TC-1A, License: UT-265-02/14 (Valid up to 2017)
Dye Penetrant Testing Level II
SNT-TC-1A, License: NDT/190985/PT-168 (Valid up to 2019)
Magnetic Particle Testing Level II
SNT-TC-1A, License: NDT/190985/MT-168(Valid 2019)
Radiographic Testing Level II
SNT-TC-1A, License: NDT/190985/RT-172 (Valid up to 2019)
HSE & ISO Certifications
NEBOSH IGC,HSE Officer
License:00193340/517190 (With Distinction)
ISO 9001:2008 QMS Lead Auditor
IRCA UK, License: IQ-LA10860
OHSAS 18001:2007 Lead Auditor
IRCA UK, License: IQ-LA2350
ISO 14001:2004 EMS Lead Auditor
IRCA UK, License: IQ-EMS43617
Project Management Professional (PMP)
U.S.A Certification (35 PDUs Achieved)

4. SUMMARY OF PROFESSIONAL EXPERIENCE
 I am Mechanical Engineer with specialized experience in Inspection, Corrosion Engineering,
Asset Integrity Management and Risk based inspection holding International Certifications API
510 (Pressure Vessel Inspector) & API 570 (Piping Inspector), API-580 (Risk Based
Inspection), API 653 (Aboveground Storage Tank Inspector), API 571 (Corrosion & Material
Inspector), API 577 (Welding Inspection & Metallurgy).
 I have more than 10 years of experience in the field of Welding, NDT and In-service Inspection
of plant static equipment’s including pressure vessels (U & R Stamp), drums, heat exchangers,
boilers (S Stamp), coolers, safety relief valves, plant process piping networks, pipelines and
aboveground storage tanks in oil and gas industry. (Offshore & Onshore).
 Good team player with excellent technical & interpersonal skills. Working in quality control &
Inspection Departments as (QHSE Manager, Senior Mechanical Inspection Engineer, QA/QC
Engineer, Welding & Piping Engineer, Lead Auditor) in KSA, UAE & Pakistan and responsible
for handling and performing various tasks and duties with various international Clients, Sadara
Chemical (KSA) , Borouge (Abu Dhabi Polymer Company) ,Fertil Ruwais Fertilizer Industries
UAE, Technip (Mepi),ADGAS (DAS Island UAE), CBI/Gasco (Abu Dhabi) , Daewoo, Takreer
(Abu Dhabi), Pakistan Petroleum Limited (pakistan),Attock Refinery Limited (Pakistan),ICI
Chemical Khewra (Pakistan).
 Adequate experience of working in Continuous and shutdown Refinery Operation as an
Inspection Engineer
 Fully conversant with various codes/standards like ASME, API, ASTM, ANSI, AWS, NACE,
BS & various client specifications like, ADCO, ADMA-OPCO,GASCO,ARAMCO, etc. In the
field of Design, Welding, Metallurgy, QA/QC, NDT, Corrosion control, Inspection & Testing.
 Monitor the Inspection Management System (IMS) and RBI performance and prepare
recommendations to mitigate risk. Monitor and update RBI study to identify and quantify the
types of degradation occurring in equipment to mitigate risk.
 Assign damage mechanisms and corrosion rates to equipment based on process and
environmental conditions in order to specify inspection types to be implemented at next
inspection.
 Identify likely failure mechanisms and expected rates of failure and advice on system
recommendations through report reviews.
 Run criticality assessments for equipment following shutdowns to establish risk levels based on
inspection results, Modifications to process, and modifications to equipment.
 Initiate inspection data reviews to confirm prediction credibility and to establish appropriate
inspection plans for plant. Create a dynamic inspection plan with details of methods, location,
extent, and frequency for each piece of equipment.
 Evaluate condition monitoring confidence by recommending reduction / deletion of inspections
to reduce unnecessary costs. Provide recommendations of increase / amendment of inspections,
risk classification and risk reduction using software and API tables, based upon these
evaluations.
 Participates in equipment failure investigations using self-determined criteria for analysis to
assess damage, related costs and reasons for failures to mitigate future risk in related equipment.

5. As API-510/570/580 Integrity Assessment Inspector:
• In-service inspection & life assessment of pressure vessels & boilers (water Tube),Piping, as
per API-510/API 570/API 580
• Performed Inspections at scheduled intervals to establish corrosion rates & remaining life of
vessels
• Prepared Detailed inspection reports including recommendations after API-510/570/580 based
Inspections
• Recommended equipment repair i.e. Repair of Boiler patch as ASME Section I after detection
of crack during in-service inspection. Repair Build Up of Ammonia vessel after observing deep
pits on vessel shell
• Performed visual inspection of Complete equipment that include associated piping & skids
• Responded to customer queries for in-service equipment’s
As Welding Inspector:
• Third Party Inspector for PQR Witness & WPS Qualification as per ASME Section IX, BS EN
15609
• Third Party Inspector for Welder Qualification as per ASME Section IX & BS EN 287
• Proposing WPS for a complete job to full fill construction code requirements
• Monitoring welding activities as per WPS
• Review of approved WPS and PQR.
• Monitoring PWHT and hardness checking of welded joints.
 Planning, supervision and coordination of all on-stream and shutdown inspection/NDT activities
of plant static equipment’s including pressure vessels, heat exchangers, coolers, columns,
heaters, PSVs, piping, pipelines, aboveground storage tanks, etc.
 Inspects plant stationary equipment by entering into vessels, boilers and towers, during
shutdowns, to check condition of equipment. Includes noting observations on cracks, pits,
thinning and any other pattern of erosion, corrosion and other interior failure. Makes
interpretations of findings, analyses for failure, prepares report and issues recommendation.
 Coordinates with the Operations, Planning and Maintenance supervisors such activities as the
scheduling and planning of inspections, obtaining the requisite permits and performing any
required special audits of equipment.
 Carries out NDT tests on mechanical equipment and piping. Tests include Penetrant examination
(PT), magnetic particle inspection (MPI), ultrasonic testing (UT), radiography (RT), PMI,
Metallographic, hardness tests, bore scopic and use of special equipment like elco-meter to
determine DFT of paint and Ferro meter for stainless steel welding tests and other tests and
inspections as required. Follows all required safety procedures while carrying out the work.
 Witness hydrostatic tests and pneumatic tests on pressure equipment, valves and pipelines as per
Company policy.
 Checks condition of safety relief valves, and reports findings to supervisor. Witnesses pressure
setting before and after repair and during any re-calibration campaign, as assigned. Prepares
report, schedules testing frequency as per policy
 Upon failures of equipment such as pumps and vessels, inspect material and assist in the
preliminary failure assessments; prepare report and issue recommendations, where applicable,
via supervisor for action by relevant departments.
 Inspects maintenance and capital project works being carried out in the plant, to ensure that
specified maintenance practices and procedures are followed for welding, installation and
fabrication as per policy and in compliance with international fabrication codes and standard.

6.  Supervises and co-ordinates contracted Painting team, witnesses and inspect all painting
(external paint and internal lining), Wrapping, insulation activities, and carry out all required
inspections and tests (DFT, WFT, profile, and holiday test).
 Ensures proper maintenance of inspection reports and records. Maintains various records in the
computerized systems, updating inspection test results and other data in specialized inspection
software system (Meridium).
 Responsible for the support of Company safety, environment and Quality policies and programs,
carrying out specific duties and responsibilities related to job as spelled out in Management
system documentation, policies, procedures, local documentation, Management System Manual,
Safety Manual and other related documents.
 Approving the QA/QC procedures, Inspection Test Plans and Quality assurance procedures and
NDT procedures of Contractor. Conduct technical and quality assessments of local
subcontractors.
Participate in quality audits. Assist in reviews of subcontractor quality dossiers and final system
compilation manuals.
 Experience in QA/QC activities which includes preparation of welding procedures, qualification
of welding procedures and welders’ performance, welding consumable quality control, welding
inspection, NDT, PWHT, hardness test, hydrostatic & pneumatic test etc. Experience in all NDT
techniques (VT, RT, UT, PT, MT) & different types of equipment’s used for NDT and
preparation/reviewing of reports. Evaluation of NDT results such as radiographic film
interpretation and UT results evaluation.
 Fully conversant with isometrics, P&ID’s and general arrangement drawings, as built preparation
& modification as per site requirements.
 Familiar with health, safety and environmental (HSE) policies of various companies like BP,
Shell, ADCO, GASCO and ADMA-OPCO.
 Familiar with RBI analysis, API 580 RBI methodology and developing the inspection
plans/frequencies for plant equipment’s, piping, pipelines & tanks.
 Experience in welding/mechanical repairs of pressure vessels, piping, pipelines & tanks. Familiar
with common welding process like SMAW, GTAW, FCAW & SAW.
 Familiar with range of material including carbon steel, alloy steel & stainless steel.
 Experience in Quality Management System (QMS) implementation and auditing.
 Familiar with in-service inspection and construction codes/RPs such as API 570, API 510, API
653, API 650, API RP 574, API RP 572, API RP 575, API RP 576, API RP 571, API RP 577,
ASME B31.3, ASME Sec VIII Div1 etc.

7. Projects
 MFC & CTF Plant
Insulation & Painting repair of static equipment at MFC & CTF Plant
Replacement of Corroded Pipe line (MIC) & Heat Exchanger (Cold Boc)
Designation: Senior Mechanical Inspector
 Trim II Phase 2
 Client: Borouge (Abu Dhabi Polymer Company)
 Designation : QA/QC Engineer
 Fabrication of SS , CS and Special Urea Grade Piping, Structure and Pipe Supports , Piping
Erection ,Test pack coordination, NDT coordination, QC dossier
 Client : Fertil Ruwais Fertilizer Industries UAE
 Designation : QA/QC Engineer
 Fabrication of SS , CS and Special Grade Piping
 Client : Technip (Mepi),ADGAS (DAS Island UAE)
 Designation : QA/QC Engineer
 Fabrication of CS & LTCS piping for Storage Tanks
 Client : CBI/Gasco (Abu Dhabi)
 Designation : QA/QC Engineer
 Ruwais Refinery Expansion Project
 Client : Daewoo, Takreer (Abu Dhabi)
 Designation Lead QA/QC Engineer
 Fabrication of (CS, LTCS, SS) Piping of P3A Project (Borouge)
 Client : TSJ,Borouge
 Designation : Lead QA/QC Engineer.
 Repair of TEG Unit 03 Vessel No.V-530 , TEG Unit 04 Vessel No.V-550 & Vessel No.V-100
( ASME “R” STAMP )
 Client : TSJ,Borouge
Designation : Lead QA/QC Engineer
KEY AREA OF COMPETENCY
 Project Services & Project management
 Project Planning & Management
 Strategic Planning & Continuous improvement
 Change &Issue management , Risk Management
 Technical Report Writing & Creating of Presentations.
 Staff Leadership , Training & Mentoring
 Management of Quality & HSE Databases
 Quality & HSE Management Systems, Auditing
 Perform Technical & QHSE Audits
 Contribute to Quality & HSE Databases
 Provide Data Tracking & Auditing Reports.

8. PROFESSIONAL EXPERIENCE
SADARA Chemical Company
Company Profile
Sadara Chemical Company is developing one of the world's largest chemicals complexes in Jubail
Industrial City in Al Sharqiya, Saudi Arabia. It will be located about 100km north-west of the city of
Dammam. Sadara Chemical Company (Sadara) is a joint venture between Saudi Aramco and The Dow
Chemical Company. Sadara will construct, own and operate a world-scale integrated chemicals complex
in Jubail Industrial City II.The fully-integrated complex will consist of 26 chemical manufacturing units
and be one of the largest of its kind in the world. It will produce about 1.5 million tons per annum
(mtpa) of ethylene and approximately 400,000tpa of propylene
The complex will also produce a variety of chemicals, such as amines, propylene glycol, polyurethanes,
low-density polyethylene, linear low-density polyethylene, elastomers, glycol ethers and propylene
oxide.
RESPONSIBILITIES AS SENIOR MECANICAL INSPECTION
ENGINEER/INSPECTOR (SADARA PROJECT)
Working in Assert Integrity department as Senior Mechanical API Inspector.
 Experience Acting as a Senior Mechanical Inspector for Sadara Chemical reviewing inspection
reports, generating and documenting C.U.I inspection and remaining life data on piping and
equipment in to plant records. Reviewing and communicating with plant operation, maintenance
and construction personnel to keep facilities operating safely and effectively.
 Identifying areas of special concern and deterioration (e.g., dead legs, injection points, buried
piping, corrosion under insulation (CUI), erosion & corrosion/erosion), preparation of inspection
procedures to follow-up their resolution to improve Plant integrity.
 Walking down isometric and P&ID drawings, verifying piping has been installed to
specifications, conducting U.T.T. thickness readings and C.U.I. inspections in accordance with
A.P.I.570,510 criteria.
 Carrying out initial, detailed and final internal visual inspection complemented with NDT
examination for the static equipment’s including pressure vessels, heat exchangers, coolers,
heaters and tanks etc.
 Carrying out in-service inspection of pressure vessels, heat exchangers, fin fan coolers, fired
heaters, process piping systems, pipelines and tanks to assure the mechanical integrity. Assist
and participate in RBI analysis and developing the inspection plans/frequencies for static
equipment’s, piping and pipelines.
 Witnessing of pressure relief valves calibration and testing (Pop Up, Leak Test & back pressure
Test ) in recommended PRV test approved Labs
 Cooperate and communicate with the Corrosion Engineer to investigate / resolve issues related to
corrosion/erosion.
 Review and analysis of previous inspection reports to summarize the integrity status of the plant
equipment’s, piping systems and pipelines.
 Writing repair recommendations. Drawing field sketches. Communicate with
Maintenance/operation Team and provide necessary recommendation for
any repair according to Codes & Procedures.

9.  Performing N.D.E. examinations on piping, supports and equipment. P.M.I. testing of materials
and welding rod electrodes and evaluating damage mechanisms with corrosion engineers.
 Review/Approve of WPS, PQR, WPQT, NDT, PWHT procedures & qualification of NDT
technician.
 Inspect any completed repairs, modifications and/or replacement.
 Review & approved Contractors documents (ITP,WPS,NDT Procedures, Hydrostatic test
Procedures, Welder Qualification Records, Equipment’s Calibrations Records ,Painting &
Coating procedures) for any repair work.(Replacement of Valves, Flanges, Piping due to
leakage & design changes/Modifications).
 Witness of Fit-UP, Welding ,NDT, Hydrostatic test ,Painting & Insulation activates.
 Equipment’s & Piping Coating inspections (Surface Preparation, PIR, Vapor barrier &
Cladding)
 Ensure full compliance with company safety regulations and HSE management systems.
 Preparation of inspection reports/certificates with all findings, abnormalities and
recommendations.
 Preparation of final inspection reports. Maintain and update all inspection files as needed.
 To participate in daily & weekly review meetings with the Maintenance /Operations as a
representative of Asset Integrity team.
RAVI GREEN Engineering (Pvt.) Ltd, Lahore.
Company Profile
Ravi Green Engineering (Pvt.) Ltd. was established in Lahore in the year 1990. Initially the company
started as a fabrication workshop with a comprehensive range of machine tools and auxiliary equipment;
Designed to undertake manufacturing and repair of many diverse items of industrial units such as
Pressure Vessels, Strippers, LPG vessels, Heat Treatment Furnaces, Water Treatment Plants,
Evaporators, Condensers, Boilers etc. The Company has capabilities to undertake Engineering and
construction services for industrial units like Sugar Mills, Power Plants, Food & Beverage Industry,
Chemical & Petrochemical Plant, LPG facilities and Oil fields etc.
RESPONSIBILITIES AS Manager Quality Health Safety & Environment (Manager
QHSE) July 2012 to May 2015
Working in QHSE department as Manager QHSE
 To study Contract & Specification thoroughly for developing Project Quality Plan (PQP) &
QIPs/ITPs for various Projects to meet customer's expectation / requirements comprehensively.
 Controlling all quality control activities on day-to-day basis and directly involving in all
inspection activities and ensuring various projects to meet quality requirements.
 Inspection & acceptance to customer supplied materials, contractor supplied materials such as
plates, pipes, fittings as per requirements of the Client Specifications.
 To review QC Procedures for initial documentation
 Conducting /Witnessing Qualifying Procedure Qualification Record (PQR)
 Co-ordination with Independent labs for conducting different tests like, Tensile Tests, Bend
Tests, Hardness, and Impact tests etc. according to codes/project specifications.

10.  Reviewing of Mechanical Test Reports of Test pieces for PQR.
 Verify & approve PQR and WPS.
 Conducting /Witnessing Welders Qualification Test (WQT) for Qualifying Welders as per
ASME Sec IX.
 Conduct Material inspection & insure that all the Material must comply with MTC’s and Code.
 Review & Verify the Welding consumable MTC’s as per ASME Sec II part C.
 Fit-up & Welding Inspection of LPG Tanks, Piping, Boilers & Pressure Vessels.
 To Control NDT & Heat treatment activities.
 NDE Coordination with Production & QC team.
 Witnessing NDT activities like DPT, MT, & UT etc.
 To review & verify the examination and NDT reports.
 Witness of Hydrostatic test & Pneumatic test.
 Inspection of various activities as per ASME Section VIII Division I, ASME B31.3 & British
Standard.
 Documentation of Quality records, review & maintaining records of calibration certificates of
instruments, Personnel certifications.
 Coordination with Planning & Production Manager for smooth execution of Project.
 To fulfilled the Client requirements related to Project smooth execution as well as according to
codes & standards.
 Working Material worked; SA 516 Gr.70, SA 36, P 235 GH, P265 GH, 13Cr Mo 4-5
 Participating in weekly review meetings with the client.
 Dealing with the client relating QA/QC matters.
 Attend progress review meetings with clients and take preventive measures to meet the
customer’s expectations.
 To give training to QC Engineers & QC Inspectors to resolve QA/QC issues.
 Coordination with client in the final inspection of Job.
 Review dossiers & handover to the client.
 Maintaining & updating of the Quality Control Manuals & records as required by ASME Audit.
 Interface with Authorized Inspectors & Authorized Inspection Agency to assure access to all
required areas and documents as required by the code are available.
 Prepare new Procedures when needed and modify Formats.
 Implemented ISO 9001 Quality Management Systems as per ISO 9001:2008 Standard
requirements. Successfully Achieved ISO 9001:2008 Re-Certifications and effectively
maintained.
 Plan and conduct internal audits and circulate audit summary to all departments of organization.
 Playing key role in client audits, surveillance audits, recertification audits by third party
 Maintaining of all quality, safety and environmental standards ( ISO 9001.14001,OHSAS)
 Continuous monitoring and implementation of standards.
 Preparation & monitoring of Non-Conformance reports (NCR)
 Ensuring prompt corrective / preventive actions for continuous system improvement.

11. DESCON Engineering Abu Dhabi, UAE
Company Profile
Descon Engineering Limited Pakistan as a well-recognized multidimensional in Engineering and
construction with 30 years of experience with high Excellency in project management, procurement,
construction, maintenance, engineering and manufacturing for all industrial sectors and infrastructure.
DESCON is EPC manufacturer for industrial equipment’s like separates, heat ex-changers, pressure
vessels, slug catcher ,boilers & Oil storage Tanks etc.
RESPONSIBILITIES AS QA/QC & PIPING ENGINEER & WELDING ENGINEER
Oct 2008 to June 2012
RESPONSIBILITIES AS QA/QC & PIPING ENGINEER
 To prepare Inspection & Test Plan (ITP)
 To prepare QC Procedures for initial documentation.
 To evaluate inspection reports and test results as per International Standards/ Customers
Standards / specs.
 To witness Piping fabrication and erection activity on construction sites.
 NDE coordination with Production & QC team.
 Test Pack Coordination (Piping) at construction sites.
 To participate in weekly review meetings with the client.
 To deal with the client relating QA/QC matters.
 Coordination with client in the final inspection of spools.
 To prepare spool dossiers & handover to the client.
 To ensure prompt Corrective / Preventive actions for continuous system improvemen
RESPONSIBILITIES AS WELDING ENGINEER
 To prepare Welding Procedure Specification (WPS), Qualifying Procedure Qualification
Record (PQR)
 To conduct & Witness Qualifying Procedure Qualification Record (PQR)
 To review Mechanical Test Reports of Test pieces for PQR.
 To conduct & Witness, Welders Qualification Test (WQT) for Qualifying Welders as per
ASME Sec IX.
 To review & verify the Welding consumable MTC’s as per ASME Sec II part C.
 Witnessing the Welding activities.
 NDE coordination with Production & QC team.
 To witness NDT activities like DPT, MT, and RT etc.

12. KOHINOOR ENERGY LIMITED LAHORE PAKISTAN
(KEL POWER PLANT 120 MW)
Shift Engineer Jan-2008 to Oct -2008
Responsibilities as Shift Engineer
 Working on WARTISILA Diesel Engine 15MW.
 Working as Engine Room Operator (ERO) takes the reading of all Engines
(Pressure, Temperature, oil level etc).
 Working as Boiler Operator takes the reading of all the Exhaust Gas Boilers (EGB) and Steam
Turbine.
 Working as Control Room Operator (CRO) Monitor and analyze all the activities perform in the
Power plant.
 Working in Fuel oil LAB, to check the viscosity, density, moisture content and Flash point.
 Take the reading of Engine Static Pressure, Engine Peak Pressure, Turbo washing, cleaning of
oil filters also the part of Training.
 Monitoring Pneumatic & Hydraulic Systems.
 Maintain Health; safety and environment regulations relating to the HSE department are met at
all the time.
 Working as maintenance Engineer, involve in the maintenance of lube oil & fuel oil separators,
HT & LT coolers (plate type Heat Exchangers) Pumps, strainers, oil filters, fuel injector, Engine
cylinders etc.
FABCON Engineering (Pvt.) Ltd, Lahore
Trainee QC Engineer Jan 2007 to Dec 2007
Responsibilities
 Preparation of Welding Procedure Specification (WPS),Qualifying Procedure Qualification
Record (PQR)
 Conducting /Witnessing Qualifying Procedure Qualification Record (PQR)
 Reviewing of Mechanical Test Reports of Test pieces for PQR.
 Check Fit up & welding by using different gauges like Hi Lo gauge, Cam Bridge etc.
 Witnessing the Welding activities.
 NDE Coordination with Production & QC team.
 Performing & Witness of NDT activities like DPT, MT etc.
 Coordination with client in the stage and final inspection of Job.
 Preparation of dossiers & handover to the client.

13. TRAININGS & SHORT COURSES
 Permit to Work to (PTW) training from ADGAS & ADMA at DAS-ISLAND.
 HSE trainings of work in confined space, work at height, H2S hazards from DESCON.
 Basic Fire Fighting training by ADMA at DAS-Island Abu Dhabi (U.A.E)
 Training of Breathing Apparatus at DAS-Island Abu Dhabi (U.A.E)
 HSE Induction from ADGAS at DAS-Island Abu Dhabi (U.A.E)
 HSE Induction from MEPI/TECHNIP at DAS-Island Abu Dhabi (U.A.E)
COMPUTATIONAL SKILLS
 Operating System
o Windows 7/Vista/ XP/2000/98
 Software
o Microsoft Office (Excel, Word, Power Point, Access ,Outlook), AutoCAD (Basic Level)
o SOLID EDGE,, MAT LAB ,C++
PROFESSIONAL AFFILIATIONS
 Member of American Society of Mechanical Engineers (ASME)
 Member of Pakistan Engineering Council (PEC)
INTERESTS
 Book Reading , Chess, Music, Driving, Software knowledge & Exploring, Painting
LANGUAGES
 English (Good Communication & Writing Skills)
 Urdu (Good Communication & Writing Skills)
 Hindi (Good Communication)
ACHIEVEMENTS
 Appreciation Certificate from SADARA (Saudi Arabia)
 Appreciation Certificate from ADGAS on DAS Island (Abu- Dhabi)
 Appreciation Certificate from DESCON (Abu- Dhabi)
PERSONAL DETAILS
Date of Birth: Jan 12, 1981
Fathers Name: Maqbool Hussain
Marital Status: Married
Nationality: Pakistani
Passport # AS4197432
Health Excellent, Physically Fit, Non -Smoker