This document is a resume submitted by Lazri Nabil for a job position. It summarizes his educational background which includes a bachelor's degree in metallurgy engineering. It outlines his 6 years of work experience in quality control and non-destructive testing for the oil and gas industries. It also lists his technical skills and qualifications in areas such as visual inspection, liquid penetrant testing, magnetic particle testing, ultrasonic testing, and lifting equipment inspection.

1. LAZRI Nabil
BP-51-A El harrouch 21400-SKIKDA
Mobil: (+213) 06 61 15 63 73/ 05 54 22 77 33
E-mail: lazrinabil@gmail.com
OBJECTIVE
I have the honor to request your high benevolence to please offer me a job within your company in
order to achieve my capacities and my knowledge in the working place in all what concerns Q.C, NDT &
LIFTING EQUIPMENT INSPECTION, as well as to participate in the advance of organization.
RESUME
As you may note in the attached resume, I have a bachelor degree in Metallurgy Engineering, I
believe that I am suitable candidate for the job posting offered by your company. I would like to stress
my work experience with companies in the oil sector where I conduct several experiences as below :
With 6 years experience in the Oilfield & Gas industries, Quality Control Inspection Field for
construction & commissioning, Corrosion monitoring (NDT Inspection ASNT Level Il) , Visual test
.(VT), Magnetic Inspection.(MT) , Liquid Penetrate Inspection (PT), Radiography Interpretation (RT),
Ultrasonic Inspection (UT), and Lifting inspection as, General Lifting Accessories, Mobile Crane ,Fork lift
EDUCATION
Mechanical EngineeringInBachelor1997:
2000: DEUA Diploma in Metallurgy and Materials Engineering, University of Annaba
Final Project theme :( study of a cast iron under the effect of some alloying element)
Graduation year : 2000
Graduation Reference: Good
Project grade : Excellent
Nationality : Algerian
TRANING COURSES
 Qualification Certificate In Lifting Equipment (Lloyds British):
ISSUED FROM : Lloyds British Egypt
 «General Lifting Accessories Inspector»
«Mobile Crane Inspector»
«Forklift Inspector»
COMPANY : CCTE & PETROTESTING-ALGERIA
 Qualification Certificate in Visual Inspection Test:
TESTING METHOD : VISUAL INSPECTION TEST (VT).
QULIFICATION LEVEL : TWO (II).
ISSUED FROM : DETECTION WELDING & NDT Consulting Office

2.  Qualification Certificate in Liquid Penetrant Test:
TESTING METHOD : LIQUID PENETRANT TESTING (PT).
QULIFICATION LEVEL : TWO (II).
ISSUED FROM : DETECTION WELDING & NDT Consulting Office
 Qualification Certificate in Magnetic Particle Test:
TESTING METHOD : MAGNETIC PARTICLE TESTING (MT).
QULIFICATION LEVEL : TWO (II).
ISSUED FROM : DETECTION WELDING & NDT Consulting Office
 Qualification Certificate In Radiographic Test:
TESTING METHOD : RADIOGRAPHIC TESTING (RT).
QULIFICATION LEVEL : TWO (II) [INTERPRETATION]
ISSUED FROM : PETROTESTING office-MOHAMED K.BENCHARIF
Level Ⅲ Cert: 121694/Cort: 5016
 Qualification Certificate In Ultrasonic Test:
TESTING METHOD : ULTRASONIC (UT).
QULIFICATION LEVEL : TWO (II).
ISSUED FROM : DETECTION WELDING & NDT Consulting Office
 Certificate of Achievement in Quality: Internal Auditor Training Ref: ISO 9001 & ISO 19011
"PEC SOLUTIONS" Organization & Information System
 Certificate of achievement after completing the training requirements in the field Dropped
Objects Awareness In November 2010 WEATHERFORD Algeria
JOB DESCRIPTION
 Piping & PIPLINE WORK…
 Cover Visual, Radiographic, Liquid Penetrant, Magnetic Particle, Leak Test, Pressure
Test, Vacuum Box, Diesel Test, Hydro Test & Pneumatic Test.
 Material Receiving Report (MRR) according to Material Certificate & Owner
Specification.
 NDT & Heat Treatment Procedure.
 Surface Preparation & Coating Procedure.
 Welding Examination (visual during welding).
 Welding Examination (NDT after finish welding )
 Spool dimension identification.
 Checking Survey report.
 Release for hydrostatic & pneumatic test.
 Prepare test package.
 Cleaning, Flushing & Drying.

3.  Review and approving all procedures and documents such as isometric drawings shop
drawings, and as built drawings.
 Pipe Straightening.
 Crane & Loose Lifting Equipment Inspection.
 Reviewing all the specifications and standards for the project.
 Study and solve the erection problems and site design amendments during the work.
 Coordinate with other contractors.
 Lifting & LEMS Inspection & handling tools of Rig parts…
 Lifting Equipment Inspection accessories, shackles, chain slings, wire rope, eyebolts, …
 Pad eyes, Rotary slip, Casing Slip, DP Elevator, Tubing Elevator, Single Joint Elevator,
Spider Slip, Derrick lifting gear, pipe basket, Personal basket, containers, skids, gas racks
and lifting frames
 Fixed lifting equipment: All runway beams, winches, swing jibs and similar fixed lifting
equipment
 Inspection of drilling and handling equipment
 Ultrasonic thickness gauging (UT) of high pressure piping systems
 UT thickness gauging inspection of air receivers
 Derrick/Mast inspection
 Hardness test (HR, HV & HB).
MANAGEMENT KNOWLEDGE
o Supervising skills
o Administration and management skills
o Good communication, comprehending interpersonal and leadership.
o Budget & Reporting preparation.
o Total Quality Management
o Quality Management systems such as ISO 9001-2008, IS0 14001-2004 & OHSAS 1800-
2007.
o Problem Solving
o Total logistic Parts
o Inventory Control Analysis,
o Procurement & Supply chain.
o Planning & forecasting skills.

4. PERSONAL EXPERIENCE
From (April 2012) Till now:
Company : CCTE Centre de contrôle technique et d’expertise
Material Testing & Quality Control
Position : Lifting & Accessories Inspection Department’s chief
NDT activities such as:
VISUAL INSPECTION TEST ( VT ).
LIQUID PENETRANT TESTING ( PT ) .
MAGNETIC PARTICLE TESTING ( MT ) .
ULTRASONIC TESTING ( UT ) .
HARDNESS TESTING ( HT ) .
RADIOGRAPHIC TESTING ( RT ) .
Witness and inspect the following activities.
Preparation and Qualification of W.P.S. & W.Q.T of Welders..
Check The Welding Process Before ,During and After Welding,
Check all Welding Parameters that are Conform to W.P.S.& Dimension.
Witnessing procedure ,qualification record of welding test according to WPS,
Welding inspection.
Pipe Straightening.
Crane & Loose Lifting Equipment Inspection.
June 2012 :
Company : Vinçotte International Algeria
Position : NDT Inspector II
NDT activities such as
VISUAL INSPECTION TEST ( VT ).
LIQUID PENETRANT TESTING ( PT ) .
MAGNETIC PARTICLE TESTING ( MT ) .
ULTRASONIC TESTING ( UT ) .
HARDNESS TESTING ( HT ) .
RADIOGRAPHIC TESTING ( RT ) .
From (January 2009) to March 2012:
Company : CCTE Centre de contrôle technique et d’expertise
Material Testing & Quality Control
Position : NDT Inspector II
NDT activities such as: VT, UT, RT, MT & PT
Materials production processes and heat treatment process
Radiography and Magnetic testing, penetrant, testing on welded joints for various assemblies

5. Measure thickness pipes, tanks and pressure equipment
Interpretation of test results and radiographs
Corrosion control & cathodic protection of pipelines, flowlines, bottoms of above ground tanks,
vessels, well casings
Quality control of external and internal coating materials
Metallographic structure examination & evaluation
Hardness test (HR, HV & HB)
From (March 2005) to August 2005:
Company : CMT- tractor motor complex of foundry
Position : foundry operator
LINGUISTIC KNOWLEDGE
Arabic: Excellent
French: Good
English: Good
COMPUTING KNOWLEDGE
Word, Excel, PowerPoint, Project,
Windows 98/2000 pro/XP/NT
PERSONAL DETAILS
ADRESSE :
BP-51-A Elharrouch 21400, Skikda, ALGERIA
Date of Birth : February 03th, 1976.
Nationality : Algerian.
Family Status : married.
Driving license : B
Mobility : National and International.
Interests : internet, and football.
Possessing Passport: yes