The document provides information on the Fire-Lite MS-9050UD(E) Fire Alarm Control Panel, which combines a control panel and Digital Alarm Communicator Transmitter. It supports up to 50 addressable devices, has extensive features like alarm verification and walk test capabilities. It transmits system status via the public telephone network and can be programmed locally or remotely via modem. Accessories include annunciators, modules, detectors, and a compatible printer.
The document describes the MS-9600LS(E) and MS-9600UDLS(E) intelligent addressable fire alarm control panels (FACPs). The FACPs support up to 318 addressable devices on a single signaling line circuit (SLC) loop with optional expansion. They provide features such as four onboard notification appliance circuits (NACs), programmable relays, EIA-232 printer interface, and 80-character LCD display. Optional modules include digital alarm communicator transmitters, annunciators, and intelligent addressable detectors and monitor modules.
The document discusses various hardware units commonly found in embedded systems, including power supplies, oscillators, reset circuits, I/O ports, displays, memories, timers, and converters. It covers topics like power saving techniques, interrupt handling, programming languages, development tools, and sample applications for small, medium, and sophisticated embedded systems.
The document describes Delta Power Management software and hardware for monitoring and managing uninterruptible power supplies (UPS). It discusses InsightPower Client, UPSentry Smart 2000, InsightPower Manager, and Shutdown Agent software, which allow for remote monitoring, centralized management, and graceful shutdown of operating systems connected to UPS devices. It also outlines Delta mini cards, smart cards, and SNMP cards that can be installed in UPS units to enable remote connectivity and management over networks.
The document discusses data acquisition (DAQ) in LabVIEW. It begins by introducing DAQ concepts and noting that LabVIEW has tools for configuring and acquiring data from DAQ devices. It then covers physical input/output signals, including transducers that convert phenomena into measurable signals. It distinguishes between analog signals, which vary continuously, and digital signals, which have discrete high and low states. Characteristics of analog signals like level, shape, and frequency are also described.
The document discusses choosing the right processor for an application. It covers microprocessors, microcontrollers, DSP processors, FPGAs, CPLDs, hardware design flow, software design flow, and various embedded system design phases like simulation, evaluation and emulation. Key factors in processor selection include development tools, performance, cost, operating systems, hardware tools, peripherals and power consumption. The document also provides resources and websites for embedded system development.
Microsoft Power Point Am Ptracs Presenatation Brief Pptus056444
AMPTRAC provides network intelligence through its hardware and software solutions. Its AMPTRAC hardware monitors network connectivity in real-time, while its iTRACS infrastructure management software provides automated work order processes, asset management, and detailed reports. This intelligence reduces downtime and increases productivity to ultimately help businesses increase profits.
The document discusses the various uses of programmable logic controllers (PLCs) at Jefferson Lab, including for equipment status, process control, chemical processing, equipment interlocks, machine protection, smoke detection, gas monitoring, envelope monitoring, and personnel safety. PLCs are used for applications like chemical processing of niobium cavities, gas monitoring in experimental halls, machine protection for the Free Electron Laser, and beam envelope monitoring. The PLC system provides redundant and segmented control through independent PLCs, networking, and isolation. Rigorous testing and configuration control procedures are followed to ensure high reliability and availability of over 99.9996% during the lab's 10+ years of operation.
This document discusses embedded systems and provides information on:
- The components of an embedded system including a processor, peripherals, and software.
- Major application areas such as consumer electronics, automation, and networking.
- The embedded system design process including determining requirements, designing architecture, selecting hardware and software, and testing.
- Recent trends in embedded systems including reduced size, cost and power consumption.
The document describes the MS-9600LS(E) and MS-9600UDLS(E) intelligent addressable fire alarm control panels (FACPs). The FACPs support up to 318 addressable devices on a single signaling line circuit (SLC) loop with optional expansion. They provide features such as four onboard notification appliance circuits (NACs), programmable relays, EIA-232 printer interface, and 80-character LCD display. Optional modules include digital alarm communicator transmitters, annunciators, and intelligent addressable detectors and monitor modules.
The document discusses various hardware units commonly found in embedded systems, including power supplies, oscillators, reset circuits, I/O ports, displays, memories, timers, and converters. It covers topics like power saving techniques, interrupt handling, programming languages, development tools, and sample applications for small, medium, and sophisticated embedded systems.
The document describes Delta Power Management software and hardware for monitoring and managing uninterruptible power supplies (UPS). It discusses InsightPower Client, UPSentry Smart 2000, InsightPower Manager, and Shutdown Agent software, which allow for remote monitoring, centralized management, and graceful shutdown of operating systems connected to UPS devices. It also outlines Delta mini cards, smart cards, and SNMP cards that can be installed in UPS units to enable remote connectivity and management over networks.
The document discusses data acquisition (DAQ) in LabVIEW. It begins by introducing DAQ concepts and noting that LabVIEW has tools for configuring and acquiring data from DAQ devices. It then covers physical input/output signals, including transducers that convert phenomena into measurable signals. It distinguishes between analog signals, which vary continuously, and digital signals, which have discrete high and low states. Characteristics of analog signals like level, shape, and frequency are also described.
The document discusses choosing the right processor for an application. It covers microprocessors, microcontrollers, DSP processors, FPGAs, CPLDs, hardware design flow, software design flow, and various embedded system design phases like simulation, evaluation and emulation. Key factors in processor selection include development tools, performance, cost, operating systems, hardware tools, peripherals and power consumption. The document also provides resources and websites for embedded system development.
Microsoft Power Point Am Ptracs Presenatation Brief Pptus056444
AMPTRAC provides network intelligence through its hardware and software solutions. Its AMPTRAC hardware monitors network connectivity in real-time, while its iTRACS infrastructure management software provides automated work order processes, asset management, and detailed reports. This intelligence reduces downtime and increases productivity to ultimately help businesses increase profits.
The document discusses the various uses of programmable logic controllers (PLCs) at Jefferson Lab, including for equipment status, process control, chemical processing, equipment interlocks, machine protection, smoke detection, gas monitoring, envelope monitoring, and personnel safety. PLCs are used for applications like chemical processing of niobium cavities, gas monitoring in experimental halls, machine protection for the Free Electron Laser, and beam envelope monitoring. The PLC system provides redundant and segmented control through independent PLCs, networking, and isolation. Rigorous testing and configuration control procedures are followed to ensure high reliability and availability of over 99.9996% during the lab's 10+ years of operation.
This document discusses embedded systems and provides information on:
- The components of an embedded system including a processor, peripherals, and software.
- Major application areas such as consumer electronics, automation, and networking.
- The embedded system design process including determining requirements, designing architecture, selecting hardware and software, and testing.
- Recent trends in embedded systems including reduced size, cost and power consumption.
This document provides information on advanced lighting controls and mandatory control requirements for lighting systems. It discusses why lighting control is important, including user needs, legal codes, and energy efficiency. The document outlines mandatory control requirements from energy codes, including automatic shutoff controls, space controls, and occupancy sensor requirements. It also discusses control requirements for exterior lighting, additional controls for special applications, and considerations for green building projects. The document provides an overview of passive and active lighting control strategies and examples of sensor specifications and room layout diagrams.
1) The document describes an auto audio equalizer system that uses digital signal analysis to allow low-cost speakers to mimic the sound quality of more expensive speakers.
2) The equalizer measures and saves the frequency response of a reference speaker, analyzes the current speaker's response, adjusts it to match the reference speaker's response, and then measures the results.
3) The system was designed and implemented using a Nios II embedded processor, FFT/IFFT blocks, and other IP functions on an Altera FPGA for a low-cost design that is easy to develop.
The document summarizes the MS-9200UDLS(E) Rev 3 Intelligent Addressable FACP with Built-In Communicator. It is a combination fire alarm control panel and digital alarm communicator transmitter with 198 points and one SLC loop. Key features include four Class B NAC circuits that can be converted to Class A, ANN-BUS capability for additional modules, and an onboard digital alarm communicator for central station monitoring. The panel can be programmed and monitored locally or remotely via a central station.
The document describes a PC-based industrial automation control system for a test facility. It discusses the objectives of automating plant operations for optimal production efficiency. It then provides an overview of different automation system types including PLC, DCS, and PC-based systems. The document outlines the architecture and advantages of traditional PLC, DCS, and industrial PC-based control systems. It also describes Teclever's PC-based control system framework and its features.
USB2PPM is a device that translates serial or voltage command values into a PPM signal for transmission to radio control systems like the Turnigy 9X. It features low latency of 20ms, long range control of over 2km, and resolutions from 0-1150. Developed as an Arduino shield, it provides a simple and low-cost interface between serial inputs and radio control while avoiding complexity of other interfaces. The device wiring, firmware, and PC software encode the command values as a string to generate the PPM signal for quadcopter control and pre-flight trim adjustments.
This document provides an overview of the Nemo Outdoor network testing solution. It outlines the course contents which cover an introduction to Nemo Outdoor, installation, configuration, features and hands-on operation. Key highlights include benchmarking of multiple networks simultaneously, extensive scripting capabilities, quality of service measurements, and the ability to export measurement files and maps. The document also lists supported vendors and chipsets, and provides instructions on setting up the hardware system and configuring Nemo Outdoor.
Microcontroller from basic_to_advancedImran Sheikh
The document discusses various topics related to embedded systems and microcontrollers including:
- Architectures like Von Neumann, Harvard and modified Harvard
- Types of microcontrollers like 8-bit, 16-bit and 32-bit
- Programming languages and IDEs used for embedded programming
- Common development boards and microcontrollers
- Memory types, buses, I/O and basic operation of microcontrollers
- Interfacing sensors and actuators to microcontrollers
Nemo Analyze is a fully scalable post-processing system that analyzes drive test data through powerful visualization and troubleshooting capabilities. It highlights any network issues and identifies probable causes. The system processes data automatically from drive test campaigns to final reports. It supports various wireless technologies and formats and scales from standalone to enterprise systems.
This document provides an introduction to embedded systems, including their components, characteristics, and design process. It discusses the selection of processors and memory devices for embedded systems. It also describes structural units in embedded processors, memory management methods, timer and counting devices, watchdog timers, real-time clocks, and the use of in-circuit emulators for debugging embedded systems.
you can be friend with me on orkut
"mangalforyou@gmail.com" : i belive in sharing the knowledge so please send project reports ,seminar and ppt. to me .
The document discusses National Instruments' CompactRIO system, a reconfigurable input/output system for industrial control applications. It consists of a real-time controller running LabVIEW that can be paired with modular I/O modules. CompactRIO offers benefits like ruggedness, flexibility, and ease of programming compared to traditional PLC or PC-based systems. Specific modules mentioned include analog input, digital I/O, and thermocouple modules. CompactRIO is targeted at applications requiring control, measurement, processing or communication capabilities.
The VRT-100 Remote Programmer allows remote access and configuration of VESDA air sampling systems. It has a user-friendly interface with soft keys and menus to view system status, configure detectors and thresholds, and program other settings. Up to 14 users with different access levels can be assigned passwords to log in and view or modify parameters.
FPGA Camp - National Instruments PresentationFPGA Central
National Instruments provides integrated software and hardware platforms. Their LabVIEW software is a graphical development environment that allows for customization through integration with third party IP and custom modules. Their hardware platforms like PXI and CompactRIO combine standard technologies like bus standards and timing with customizable interfaces. CompactRIO embeds an FPGA and real-time processor in a small ruggedized package for industrial embedded applications. LabVIEW allows development of custom I/O through the FPGA without requiring hardware design skills.
WTS is Siemens’ high performance, high availability trackside signalling system for main line railways. WTS is hosted on the proven, flexible and highly reliable Trackguard Westrace MkII platform. With now the addition of PIMs and ROMs, Westrace MkII PIM50 (Parallel Input Modules) and ROM50 (Relay Output Modules) can be used to relock an existing relay room without affecting the outside infrastructure and can also be used to interface existing line circuits at the fringes.
This document discusses the development of a low-cost target board based on the AT89C52 microcontroller for embedded system design. It provides an overview of the target board configuration, development tools used like the SDCC cross-compiler and PAULMON monitor program, and the testing process to test minimal hardware boot, program download to RAM, and peripheral functions. The target board aims to provide students free and open access to embedded design.
The document discusses design technology for embedded systems. It covers several key topics:
- There is a tradeoff between hardware and software implementation based on metrics like performance, power, size, and flexibility. Hardware and software design are now viewed together.
- Improving productivity involves automation through synthesis and reuse using predesigned components like processor cores. Verification ensures designs are correct and complete.
- Emulators can simulate systems faster than software simulation by mapping designs to FPGAs. This allows testing in real environments. Intellectual property cores provide predesigned processors and components for reuse.
The document describes the basic components of an analog control loop including a transmitter, controller, and final control element. It then provides an overview of analog and digital control systems, explaining the differences between centralized and distributed control systems. Various Yokogawa control system products from the 1960s to beyond 2000 are also summarized.
This document provides instructions for installing and configuring the Nemo Server. It outlines 12 steps for installation including installing the server hardware, configuring network interfaces, changing passwords, configuring audio testing options, and calibrating audio lines. It also provides overviews of the Nemo Server Manager software, file management tools, administration options, and data testing capabilities of the server. Appendices include additional details on networking, passwords, guidelines, and updating instructions.
Embedded System Practical Workshop using the ARM ProcessorMomenMostafa
The document describes a workshop on embedded systems using the ARM processor. It covers topics over 4 days, including introductions to embedded systems and the ARM Cortex-M processor. It describes labs on interfacing with peripherals like RGB LEDs, UART, LCD displays and more. Code for the labs is provided in a GitHub repository. The document provides an overview of the TM4C12x microcontroller and details programming concepts for peripherals like parallel I/O ports and using the phase locked loop and SysTick timer.
The ES-200X is an intelligent addressable fire alarm control panel from Fire•Lite Alarms that replaces the MS-9200UDLS panel. It comes with a pre-installed IPOTS-COM communicator for dual communication over IP networks and telephone lines. The panel can support up to 198 addressable devices and is programmed and operated like other Fire•Lite panels. It provides features such as four notification circuits, programmable relays, auxiliary functions, and a history file. The panel, accessories, and compatible intelligent detectors are also described.
This document provides an overview of the Fire-Lite MS-9200UDLS(E) Rev 2 Intelligent Addressable Fire Alarm Control Panel (FACP). It has a built-in digital alarm communicator transmitter (DACT) and supports up to 198 devices connected via its Signaling Line Circuit (SLC) loop. Key features include four onboard notification appliance circuits (NACs), an 80-character LCD display, integral DACT for central station monitoring, and compatibility with various annunciators and modules. The control panel can be programmed and monitored locally or remotely using a Windows-based PC and PS-Tools software.
This document provides information on advanced lighting controls and mandatory control requirements for lighting systems. It discusses why lighting control is important, including user needs, legal codes, and energy efficiency. The document outlines mandatory control requirements from energy codes, including automatic shutoff controls, space controls, and occupancy sensor requirements. It also discusses control requirements for exterior lighting, additional controls for special applications, and considerations for green building projects. The document provides an overview of passive and active lighting control strategies and examples of sensor specifications and room layout diagrams.
1) The document describes an auto audio equalizer system that uses digital signal analysis to allow low-cost speakers to mimic the sound quality of more expensive speakers.
2) The equalizer measures and saves the frequency response of a reference speaker, analyzes the current speaker's response, adjusts it to match the reference speaker's response, and then measures the results.
3) The system was designed and implemented using a Nios II embedded processor, FFT/IFFT blocks, and other IP functions on an Altera FPGA for a low-cost design that is easy to develop.
The document summarizes the MS-9200UDLS(E) Rev 3 Intelligent Addressable FACP with Built-In Communicator. It is a combination fire alarm control panel and digital alarm communicator transmitter with 198 points and one SLC loop. Key features include four Class B NAC circuits that can be converted to Class A, ANN-BUS capability for additional modules, and an onboard digital alarm communicator for central station monitoring. The panel can be programmed and monitored locally or remotely via a central station.
The document describes a PC-based industrial automation control system for a test facility. It discusses the objectives of automating plant operations for optimal production efficiency. It then provides an overview of different automation system types including PLC, DCS, and PC-based systems. The document outlines the architecture and advantages of traditional PLC, DCS, and industrial PC-based control systems. It also describes Teclever's PC-based control system framework and its features.
USB2PPM is a device that translates serial or voltage command values into a PPM signal for transmission to radio control systems like the Turnigy 9X. It features low latency of 20ms, long range control of over 2km, and resolutions from 0-1150. Developed as an Arduino shield, it provides a simple and low-cost interface between serial inputs and radio control while avoiding complexity of other interfaces. The device wiring, firmware, and PC software encode the command values as a string to generate the PPM signal for quadcopter control and pre-flight trim adjustments.
This document provides an overview of the Nemo Outdoor network testing solution. It outlines the course contents which cover an introduction to Nemo Outdoor, installation, configuration, features and hands-on operation. Key highlights include benchmarking of multiple networks simultaneously, extensive scripting capabilities, quality of service measurements, and the ability to export measurement files and maps. The document also lists supported vendors and chipsets, and provides instructions on setting up the hardware system and configuring Nemo Outdoor.
Microcontroller from basic_to_advancedImran Sheikh
The document discusses various topics related to embedded systems and microcontrollers including:
- Architectures like Von Neumann, Harvard and modified Harvard
- Types of microcontrollers like 8-bit, 16-bit and 32-bit
- Programming languages and IDEs used for embedded programming
- Common development boards and microcontrollers
- Memory types, buses, I/O and basic operation of microcontrollers
- Interfacing sensors and actuators to microcontrollers
Nemo Analyze is a fully scalable post-processing system that analyzes drive test data through powerful visualization and troubleshooting capabilities. It highlights any network issues and identifies probable causes. The system processes data automatically from drive test campaigns to final reports. It supports various wireless technologies and formats and scales from standalone to enterprise systems.
This document provides an introduction to embedded systems, including their components, characteristics, and design process. It discusses the selection of processors and memory devices for embedded systems. It also describes structural units in embedded processors, memory management methods, timer and counting devices, watchdog timers, real-time clocks, and the use of in-circuit emulators for debugging embedded systems.
you can be friend with me on orkut
"mangalforyou@gmail.com" : i belive in sharing the knowledge so please send project reports ,seminar and ppt. to me .
The document discusses National Instruments' CompactRIO system, a reconfigurable input/output system for industrial control applications. It consists of a real-time controller running LabVIEW that can be paired with modular I/O modules. CompactRIO offers benefits like ruggedness, flexibility, and ease of programming compared to traditional PLC or PC-based systems. Specific modules mentioned include analog input, digital I/O, and thermocouple modules. CompactRIO is targeted at applications requiring control, measurement, processing or communication capabilities.
The VRT-100 Remote Programmer allows remote access and configuration of VESDA air sampling systems. It has a user-friendly interface with soft keys and menus to view system status, configure detectors and thresholds, and program other settings. Up to 14 users with different access levels can be assigned passwords to log in and view or modify parameters.
FPGA Camp - National Instruments PresentationFPGA Central
National Instruments provides integrated software and hardware platforms. Their LabVIEW software is a graphical development environment that allows for customization through integration with third party IP and custom modules. Their hardware platforms like PXI and CompactRIO combine standard technologies like bus standards and timing with customizable interfaces. CompactRIO embeds an FPGA and real-time processor in a small ruggedized package for industrial embedded applications. LabVIEW allows development of custom I/O through the FPGA without requiring hardware design skills.
WTS is Siemens’ high performance, high availability trackside signalling system for main line railways. WTS is hosted on the proven, flexible and highly reliable Trackguard Westrace MkII platform. With now the addition of PIMs and ROMs, Westrace MkII PIM50 (Parallel Input Modules) and ROM50 (Relay Output Modules) can be used to relock an existing relay room without affecting the outside infrastructure and can also be used to interface existing line circuits at the fringes.
This document discusses the development of a low-cost target board based on the AT89C52 microcontroller for embedded system design. It provides an overview of the target board configuration, development tools used like the SDCC cross-compiler and PAULMON monitor program, and the testing process to test minimal hardware boot, program download to RAM, and peripheral functions. The target board aims to provide students free and open access to embedded design.
The document discusses design technology for embedded systems. It covers several key topics:
- There is a tradeoff between hardware and software implementation based on metrics like performance, power, size, and flexibility. Hardware and software design are now viewed together.
- Improving productivity involves automation through synthesis and reuse using predesigned components like processor cores. Verification ensures designs are correct and complete.
- Emulators can simulate systems faster than software simulation by mapping designs to FPGAs. This allows testing in real environments. Intellectual property cores provide predesigned processors and components for reuse.
The document describes the basic components of an analog control loop including a transmitter, controller, and final control element. It then provides an overview of analog and digital control systems, explaining the differences between centralized and distributed control systems. Various Yokogawa control system products from the 1960s to beyond 2000 are also summarized.
This document provides instructions for installing and configuring the Nemo Server. It outlines 12 steps for installation including installing the server hardware, configuring network interfaces, changing passwords, configuring audio testing options, and calibrating audio lines. It also provides overviews of the Nemo Server Manager software, file management tools, administration options, and data testing capabilities of the server. Appendices include additional details on networking, passwords, guidelines, and updating instructions.
Embedded System Practical Workshop using the ARM ProcessorMomenMostafa
The document describes a workshop on embedded systems using the ARM processor. It covers topics over 4 days, including introductions to embedded systems and the ARM Cortex-M processor. It describes labs on interfacing with peripherals like RGB LEDs, UART, LCD displays and more. Code for the labs is provided in a GitHub repository. The document provides an overview of the TM4C12x microcontroller and details programming concepts for peripherals like parallel I/O ports and using the phase locked loop and SysTick timer.
The ES-200X is an intelligent addressable fire alarm control panel from Fire•Lite Alarms that replaces the MS-9200UDLS panel. It comes with a pre-installed IPOTS-COM communicator for dual communication over IP networks and telephone lines. The panel can support up to 198 addressable devices and is programmed and operated like other Fire•Lite panels. It provides features such as four notification circuits, programmable relays, auxiliary functions, and a history file. The panel, accessories, and compatible intelligent detectors are also described.
This document provides an overview of the Fire-Lite MS-9200UDLS(E) Rev 2 Intelligent Addressable Fire Alarm Control Panel (FACP). It has a built-in digital alarm communicator transmitter (DACT) and supports up to 198 devices connected via its Signaling Line Circuit (SLC) loop. Key features include four onboard notification appliance circuits (NACs), an 80-character LCD display, integral DACT for central station monitoring, and compatibility with various annunciators and modules. The control panel can be programmed and monitored locally or remotely using a Windows-based PC and PS-Tools software.
The IntelliKnight 5808 is a 127-point single loop addressable fire alarm control panel that provides advanced features at a cost-effective price. It supports up to 99 Hochiki or SK devices and has built-in digital communication for central station monitoring. Additional modules can expand the system's capabilities, and it is compatible with devices from several major manufacturers.
The ZXSe Range Data Sheet summarizes an analogue addressable fire alarm control panel system. It supports five detection protocols and can be expanded with additional devices, loop cards, printers, or networked panels. Key features include multi-protocol support, modular expandability, intuitive user interface, and networking of up to 99 panels to manage over 60,000 devices.
The NFS2-640 is an intelligent fire alarm system that features an expandable signaling line circuit and notification appliance circuits. The basic components include a mainboard, power supply, cabinet, and optional modules like additional signaling line circuits or network cards. The mainboard has connections for batteries, AC power, auxiliary devices, and notification appliances. It also has switches, LEDs, and connections to support additional peripherals and networking capabilities. Loop and expander modules can increase the system's capacity of detectors and modules on the signaling line circuits. Optional keypads, displays, and annunciators provide the user interface.
The NFS-320 is an intelligent fire alarm system designed for small applications. It features a single cabinet solution, quick-change CPU, one signaling line circuit, and four notification appliance circuits. The basic system includes a CPU, power supply, cabinet, and optional components like printers, annunciators, and a digital communicator. The CPU mainboard allows control and monitoring and includes features like battery connection, AC power, notification circuits, and an SLC loop to connect detectors and modules. The system can also interface with an optional UDACT digital communicator, KDM-R2 keypad, and NFV-25/50ZS voice evacuation system.
The document summarizes the features and components of the NFS-320 intelligent fire alarm system. The NFS-320 is designed for small applications with a single cabinet solution. It has a CPU board with one signaling line circuit that can support up to 318 intelligent points and four notification circuits. Key components include the CPU, power supply, batteries, notification circuits, and optional modules like printers, annunciators, and a digital communicator.
The document summarizes the features and components of the NFS-320 intelligent fire alarm system. The NFS-320 uses a single cabinet solution with a CPU/chassis assembly, one signaling line circuit, and four notification appliance circuits. Key components include the CPU mainboard, battery connection, AC power, backup switches, system switches, KDM connector, status LEDs, auxiliary inputs, notification appliance circuits, and printer/network connections. It can support up to 318 intelligent flashscan points and interface with additional equipment like annunciators and a digital communicator.
An embedded system can be thought of as a computer hardware system having software embedded in it. It is a microcontroller or microprocessor based system which is designed to perform a specific task. An embedded system has hardware, application software, and a real-time operating system (RTOS) that supervises the application software and provides mechanisms to control latencies according to a fixed plan. Embedded systems are single-functioned, tightly constrained, reactive, real-time systems based on microprocessors with limited memory that are connected and combine both hardware and software.
Deep Tech System No1 Institute for providing plc training in Delhi NCR. We offer PLC programming training a wide scope to gain good knowledge in automation industrial training with extensive lab facilities.
Deep Tech System No1 Institute for providing plc training in Delhi NCR. We offer PLC programming training a wide scope to gain good knowledge in automation industrial training with extensive lab facilities.
RTOS based Confidential Area Security Systemajinky gadewar
This document describes an RTOS based security system that uses multiple authentication methods and sensors for access control. The system uses two ARM boards - one with fingerprint, RFID and password authentication and the other with sensors. If authentication matches on the first board, the second board is disabled, otherwise it is enabled along with the sensors. The system provides three-factor security and protects areas by detecting intrusions through various sensors while reducing bandwidth consumption compared to video surveillance.
The document provides information on the Siemens PXC Controller Series. It discusses the PXC Compact series controllers and their flexibility to customize control programs for applications. It also describes the controllers' direct digital control routines, energy management applications, operator interface, PPCL programming language, and more. Troubleshooting tips are also included.
The document provides information about a Freescale USB Academy training on ARM Cortex-M0+ using the FRDM-KL46Z board. It includes:
- An overview of the KL46Z256 microcontroller and FRDM-KL46Z board.
- Details of four labs that will be covered: Lab 0 demonstrates a basic "hello world" blinky program; Lab 1 implements a USB HID mouse using the accelerometer; Lab 2 implements a USB CDC serial device; Lab 3 implements a USB mass storage host.
- Information on using mbed.org and the OpenSDA debug interface to program the board.
This document provides information about connecting Delta servo drives and motors in an indexing application. A Delta PLC acts as the master controller, receiving position inputs from an HMI and sending pulse signals to two Delta ASD-B0421A servo drives to control the motion of two ECMA-C30604ES Delta motors. The wiring details and pinouts for connection to the servo drives are shown, along with motor specifications and the principle of operation where the PLC synchronizes motor position based on sensor triggers.
This document provides a catalog of fire alarm and detection system products made by Hochiki, including:
1) The FireNET and FireNET Plus analog addressable fire alarm control panels, which support up to 127 devices per signaling line circuit and network communication between up to 64 panels.
2) Serial and network annunciators that display system events and status on an LCD screen and control panel functions.
3) Input/output modules and loop expanders to add devices and signaling lines to the system.
4) Notification appliances, detectors, monitoring sensors and other accessories that integrate into the FireNET system.
This document provides information about using a Delta servo drive and motor system for an Anilex roller used in UV coating applications. A master encoder is attached to the main unit and transmits pulse commands to the Delta servo drive. The servo reads the encoder pulses and matches the speed of the roller to the machine. A Delta ASDA-SOFT software is used to configure the drive and monitor operation. The specific components used include a Delta ECMA-C11010ES servo motor, a Delta ASD-A2-1021-U servo drive, and a Delta FL1210 master encoder. Wiring details are provided to connect the encoder to the drive.
The document describes the NFS-320 intelligent fire alarm control panel. It has the following key features:
- It is part of the ONYX series of fire alarm controls and can be used in stand-alone or networked configurations.
- It has an isolated intelligent signaling line circuit that can connect up to 159 detectors and 159 modules.
- Additional optional modules allow it to interface with wireless devices and provide additional notification and control functions.
The document summarizes the specifications and features of the Texecom Odyssey 3 external sounder and strobe series. Key features include a 115dB volume, IP65 sealed electronics, selectable SAB/SCB mode, screw, lid, and wall tamper protection, twin alternating LEDs, and revolutionary screw retention system. It is competitively priced, easy to install, and provides uncompromising performance for professional security installations.
The document describes the TOA VM-3000 series integrated voice evacuation system. It is an EN 54 compliant system that combines emergency voice alarm and public address functions. Key features include fully digital audio processing and control, built-in voice messages, monitoring of speaker lines, and support for paging, background music, and microphone inputs. The system is suitable for small to medium venues and provides emergency evacuation and general announcement capabilities.
The document describes the TOA VM-3000 series integrated voice evacuation system. The VM-3000 series provides both emergency evacuation functions and general public address/paging functions. It is EN 54 certified and ideal for small to medium venues. The system has integrated amplifiers, supports up to 60 speaker zones, and can be configured via software.
This document provides installation instructions for installing a SV-200MA Surveillance Board in VM-2120 or VM-2240 amplifiers. The SV-200MA adds monitoring, zone control, and backup amplifier functions. It consists of an SV-200M board and SV extension board. The 10 step installation process includes setting jumpers, connecting cables between the boards, mounting the surveillance board, and replacing the amplifier cover.
The document describes TOA's SC Series Paging Horn Speakers. It includes specifications for 6 models that are rated at either 10W, 15W, or 30W and are designed for both indoor and outdoor use. The speakers feature weatherproof stainless steel brackets, powder coated horns, and input impedance selector switches on high-impedance models. Diagrams show the speakers' frequency responses, beamwidths, directivity factors, and polar responses.
The document describes TOA's SC Series Paging Horn Speakers. It includes specifications for 6 models that are rated at either 10W, 15W, or 30W and are designed for both indoor and outdoor use. The speakers feature weatherproof stainless steel brackets, powder coated horns, and input impedance selector switches on high-impedance models. Diagrams show the speakers' frequency responses, beamwidths, directivity factors, and polar responses.
The document describes TOA's CS-154 and CS-304 outdoor wide-range speakers. The speakers use wide-range horns to provide high quality background music or paging announcements over a wide area. They are designed for outdoor use and have weatherproof enclosures that can withstand demanding environmental conditions. The speakers have adjustable impedance settings and provide high output with increased efficiency through the use of a horn and cone speaker combination.
The document describes the TOA BS-678 wall mount speaker system. It is a double-cone speaker with a wooden cabinet and stylish, compact design. It produces high quality sound for background music and announcements. Key features include an adjustable input impedance selector, push-in connector for easy wiring, and horizontal or vertical mounting orientation. Specifications include a frequency response of 150-20,000Hz, 6W or 3W power handling, and an off-white finish.
The document describes the TOA BS-633A/633AT wall mount speaker systems. The BS-633A is a basic 5" cone speaker with a transformer allowing multiple power taps. The BS-633AT includes an additional built-in attenuator, allowing connection to 2-wire and 3-wire speaker systems. Both have a compact ABS resin enclosure and push-in terminal for easy installation. Key specifications include a frequency response of 120-15,000Hz, 91dB sensitivity, and multiple power taps for 100V and 70V speaker lines.
This document summarizes an LB1-UW06-Fx cabinet loudspeaker from Bosch. It is a 6W loudspeaker intended for indoor use. It has mounting brackets for wall or ceiling mounting. It is constructed of MDF and has a durable vinyl or cloth covering available in white or black. It provides good speech intelligibility and background music reproduction.
This document summarizes a 6W loudspeaker for indoor use. It has good speech intelligibility and background music reproduction. The loudspeaker has an MDF construction with mounting brackets for wall or ceiling installation. It complies with international safety regulations and certifications.
The LA1-UW36-x is a 36W column loudspeaker for indoor use where directivity is important. It has high sensitivity and provides good speech intelligibility and background music reproduction. It has a swivel wall mounting bracket and is available in black or white. It uses four dual cone drivers and a durable MDF enclosure for reliability under extreme conditions.
The LA1-UW24-x is a 24W column loudspeaker for indoor use where directivity is important. It has good speech intelligibility and background music reproduction. It comes with a swivel wall-mounting bracket and is available in black or white. It has four high-sensitivity drivers and can be powered at full, half, or quarter power via a terminal block on the rear.
This document provides specifications for a BGT 4139TS video camera model. It includes details on the camera's image sensor, resolution, lenses, operational features like auto day/night mode and infrared LEDs, environmental tolerances, electrical requirements, mechanics including dimensions and weight, and manufacturer. The camera has a 1/3" CCD sensor, 600TVL resolution, auto settings, infrared for night vision up to 20 meters, and an IP66-rated casing.
This document provides specifications for a BGT 5504A camera model, including details about its video capabilities, lens, operational features, environmental tolerances, electrical requirements, and dimensions. It has a 1/4" CCD image sensor, 420TVL resolution, auto day/night mode, 15m infrared range, and measures 92mm diameter by 80mm, weighing 190g.
This data sheet provides specifications for the BGT 5140A video camera, including its CCD image sensor, PAL/NTSC compatibility, effective pixel count, 420TVL horizontal resolution, low light performance down to 0.5 lux, auto day/night functionality, 3.6mm fixed focal length lens, operating temperature range of -10°C to 50°C, power requirements of 12V 150mA with a 12V 1A adapter, and compact dimensions of 60x90x190g.
This data sheet provides specifications for a BGT 9120TS security camera model. It lists technical details such as the CCD image sensor and effective pixel resolution, as well as operational features including auto day/night mode, backlight compensation, and automatic gain control. Environmental specifications note an operating temperature range of -10°C to 50°C and IP66 protection rating. The camera is powered by a 12V 370mA power supply and has dimensions of 266x97x63mm.
This data sheet provides specifications for a BGT 9119AS video camera model. It has a 1/3 inch Sony CCD image sensor that can capture video in PAL or NTSC formats with effective pixel counts of 752x582 or 768x494 respectively. The camera has a 3.6/6mm fixed lens, auto day/night functionality, and can function in temperatures from -10 to 50 degrees Celsius. It is powered by a 12V 1A adapter and has IP67 protection against dust and water.
This document provides specifications for the BGT 720TOS security camera model, including details about its video capabilities, lens, operational features, environmental tolerances, electrical requirements, and dimensions. Key specs include a 1/3" Sony CCD image sensor, 600TVL horizontal resolution, auto day/night functionality, auto electronic shutter speed range of 1/50-1/100,000 sec for PAL and 1/60-1/100,000 sec for NTSC, operating temperature range of -10°C to +50°C, input voltage of DC12V/150mA, and compact dimensions of 102*55*40mm.
This document provides specifications for the BGT 5221AS video camera model. It includes details about the camera's image sensor, resolution, lenses, video output, day/night functionality, electrical requirements, and dimensions. Key features noted are a 1/3" Sony CCD image sensor, 480TVL horizontal resolution, auto day/night mode, infrared LEDs for night vision up to 10 meters, and DC12V 400mA power input. The camera measures 90*108*108mm and weighs 300g.
❼❷⓿❺❻❷❽❷❼❽ Dpboss Matka Result Satta Matka Guessing Satta Fix jodi Kalyan Final ank Satta Matka Dpbos Final ank Satta Matta Matka 143 Kalyan Matka Guessing Final Matka Final ank Today Matka 420 Satta Batta Satta 143 Kalyan Chart Main Bazar Chart vip Matka Guessing Dpboss 143 Guessing Kalyan night
SATTA MATKA DPBOSS KALYAN MATKA RESULTS KALYAN MATKA MATKA RESULT KALYAN MATKA TIPS SATTA MATKA MATKA COM MATKA PANA JODI TODAY BATTA SATKA MATKA PATTI JODI NUMBER MATKA RESULTS MATKA CHART MATKA JODI SATTA COM INDIA SATTA MATKA MATKA TIPS MATKA WAPKA ALL MATKA RESULT LIVE ONLINE MATKA RESULT KALYAN MATKA RESULT DPBOSS MATKA 143 MAIN MATKA KALYAN MATKA RESULTS KALYAN CHART KALYAN CHART
SATTA MATKA DPBOSS KALYAN MATKA RESULTS KALYAN CHART KALYAN MATKA MATKA RESULT KALYAN MATKA TIPS SATTA MATKA MATKA COM MATKA PANA JODI TODAY BATTA SATKA MATKA PATTI JODI NUMBER MATKA RESULTS MATKA CHART MATKA JODI SATTA COM INDIA SATTA MATKA MATKA TIPS MATKA WAPKA ALL MATKA RESULT LIVE ONLINE MATKA RESULT KALYAN MATKA RESULT DPBOSS MATKA 143 MAIN MATKA KALYAN MATKA RESULTS KALYAN CHART
High-Quality IPTV Monthly Subscription for $15advik4387
Experience high-quality entertainment with our IPTV monthly subscription for just $15. Access a vast array of live TV channels, movies, and on-demand shows with crystal-clear streaming. Our reliable service ensures smooth, uninterrupted viewing at an unbeatable price. Perfect for those seeking premium content without breaking the bank. Start streaming today!
https://rb.gy/f409dk
SATTA MATKA DPBOSS KALYAN MATKA RESULTS KALYAN CHART KALYAN MATKA MATKA RESULT KALYAN MATKA TIPS SATTA MATKA MATKA COM MATKA PANA JODI TODAY BATTA SATKA MATKA PATTI JODI NUMBER MATKA RESULTS MATKA CHART MATKA JODI SATTA COM INDIA SATTA MATKA MATKA TIPS MATKA WAPKA ALL MATKA RESULT LIVE ONLINE MATKA RESULT KALYAN MATKA RESULT DPBOSS MATKA 143 MAIN MATKA KALYAN MATKA RESULTS KALYAN CHART
NIMA2024 | De toegevoegde waarde van DEI en ESG in campagnes | Nathalie Lam |...BBPMedia1
Nathalie zal delen hoe DEI en ESG een fundamentele rol kunnen spelen in je merkstrategie en je de juiste aansluiting kan creëren met je doelgroep. Door middel van voorbeelden en simpele handvatten toont ze hoe dit in jouw organisatie toegepast kan worden.
The Role of White Label Bookkeeping Services in Supporting the Growth and Sca...YourLegal Accounting
Effective financial management is important for expansion and scalability in the ever-changing US business environment. White Label Bookkeeping services is an innovative solution that is becoming more and more popular among businesses. These services provide a special method for managing financial duties effectively, freeing up companies to concentrate on their main operations and growth plans. We’ll look at how White Label Bookkeeping can help US firms expand and develop in this blog.
Best Competitive Marble Pricing in Dubai - ☎ 9928909666Stone Art Hub
Stone Art Hub offers the best competitive Marble Pricing in Dubai, ensuring affordability without compromising quality. With a wide range of exquisite marble options to choose from, you can enhance your spaces with elegance and sophistication. For inquiries or orders, contact us at ☎ 9928909666. Experience luxury at unbeatable prices.
The report *State of D2C in India: A Logistics Update* talks about the evolving dynamics of the d2C landscape with a particular focus on how brands navigate the complexities of logistics. Third Party Logistics enablers emerge indispensable partners in facilitating the growth journey of D2C brands, offering cost-effective solutions tailored to their specific needs. As D2C brands continue to expand, they encounter heightened operational complexities with logistics standing out as a significant challenge. Logistics not only represents a substantial cost component for the brands but also directly influences the customer experience. Establishing efficient logistics operations while keeping costs low is therefore a crucial objective for brands. The report highlights how 3PLs are meeting the rising demands of D2C brands, supporting their expansion both online and offline, and paving the way for sustainable, scalable growth in this fast-paced market.
𝐔𝐧𝐯𝐞𝐢𝐥 𝐭𝐡𝐞 𝐅𝐮𝐭𝐮𝐫𝐞 𝐨𝐟 𝐄𝐧𝐞𝐫𝐠𝐲 𝐄𝐟𝐟𝐢𝐜𝐢𝐞𝐧𝐜𝐲 𝐰𝐢𝐭𝐡 𝐍𝐄𝐖𝐍𝐓𝐈𝐃𝐄’𝐬 𝐋𝐚𝐭𝐞𝐬𝐭 𝐎𝐟𝐟𝐞𝐫𝐢𝐧𝐠𝐬
Explore the details in our newly released product manual, which showcases NEWNTIDE's advanced heat pump technologies. Delve into our energy-efficient and eco-friendly solutions tailored for diverse global markets.
1. DF-52418:E1 • A1-20
MS-9050UD(E)
Fire Alarm Control Panel
with DACT
Addressable
General
The Fire•Lite MS-9050UD(E) is a Fire Alarm Control Panel
(FACP) and Digital Alarm Communicator/Transmitter (DACT)
combined into one circuit board. This compact, intelligent
addressable control panel supports up to 50 addressable
devices of any type of detectors and modules. With an exten-
sive list of powerful features, the MS-9050UD programs just like
Fire•Lite’s larger products, yet fits into applications previously
served only by conventional panels.
The MS-9050UD’s integral DACT transmits system status
(alarms, troubles, AC loss, etc.) to a Central Station via the pub-
lic switched telephone network. It also allows remote and local
programming of the control panel using the PK-CD Upload/
Download utility. In addition, the control panel may be pro-
grammed or interrogated off-site via the public switched tele-
52418cov.jpg
phone network. Any personal computer with Windows™ 95 or
greater, and compatible modem with a speed of 14.4 kbps or
faster and Fire•Lite Upload/Download software kit PK-CD, may
serve as a Service Terminal. This allows download of the entire
program or upload of the entire program, history file, walk-test
data, current status and system voltages. • Point trouble identification.
The power supply and all electronics are contained on a single • Waterflow selection per module point.
circuit board supported on a new quick install chassis and • Alarm verification selection per detector point.
housed in a metal cabinet. Available accessories include local • Maintenance alert warns when smoke detector dust accumu-
and remote upload/download software, remote annunciators, lation is excessive.
and reverse polarity/city box transmitter. (4XTMF)
• One-person audible or silent walk test with walk-test log and
New options include a UL listed printer, PRN-6F and the new printout.
IPDACT Internet Monitoring module.The FireWatch Series inter- • System alarm verification selection per detector point.
net monitoring modules IPDACT-2 and IPDACT-2UD permit
monitoring of alarm signals over the Internet, saving the monthly • PAS (Positive Alarm Sequence) and Pre-signal per point
cost of two telephone lines. Although not required, the second- (NFPA 72 compliant).
ary telephone line may be retained providing backup communi- • Up to eight ANN-BUS annunciators
cation over the public switched telephone line. • Remote Acknowledge, Alarm Silence, Reset and Drill via
NOTE: Unless otherwise specified, the term MS-9050UD is used addressable modules or remote annunciator.
in this data sheet to refer to both the MS-9050UD and the MS- • Upload/Download (local or remote) of program and data via
9050UDE FACPs. For MS-9050UDC, refer to DF-60445. integral DACT.
SLC COMMUNICATION LOOP
Features
• Single addressable SLC loop which meets NFPA Style 4, 6
• Listed to UL Standard 864, 9th edition. and 7 requirements.
• Auto-program (learn mode) reduces installation time. • 50 addressable device capacity (any combination of address-
Reports two devices set to the same address. able detectors and modules).
• On-board DACT. • Compatible with Fire•Lite’s addressable devices (refer to SLC
• Two independently programmable Style Z (Class A) or Style Wiring Manual).
Y (Class B) NAC circuits.
• Selectable strobe synchronization for System Sensor, Whee- NOTIFICATION APPLIANCE CIRCUITS (NACS)
lock, and Gentex devices. • Two independently programmable output circuits. Circuits
• Remote Acknowledge, Silence, Reset and Drill via address- can be configured for the following outputs:
able monitor modules. – Style Y (Class B)
• Two programmable relays and one fixed trouble relay. – Style Z (Class A)
• Built-in Programmer. – Door Holder Service (cannot be used for notification appliances)
• Telephone Line Active LEDs. – Aux Power Source (cannot be used for notification appliances)
• EIA-232 PC interface. • Silence Inhibit and Autosilence timer options.
• Integral 80-character LCD display with backlighting. • Continuous, March Time, Temporal or California code for
• Real-time clock/calendar with automatic daylight savings main circuit board NACs with two-stage capability.
control. • Selectable strobe synchronization per NAC.
• History file with 500 event capacity. • 2.5 A total power for NACs.
• Automatic detector sensitivity testing (NFPA 72 compliant). NOTE: Maximum or total 24VDC system power shared between
• Automatic device type-code verification. all NAC circuits and the ANN-BUS is 2.7 A.
DF-52418:E1 • 1/27/12 — Page 1 of 4
2. PROGRAMMING AND SOFTWARE
• Autoprogram (learn mode) reduces installation time.
• Custom English labels (per point) may be manually entered
or selected from an internal library file.
• Two programmable Form-C relay outputs.
• 20 software zones.
• Continuous fire protection during online programming at the
front panel.
MS-9050UD • Program Check automatically catches common errors not
Fire Alarm linked to any zone or input point.
Control Panel
• OFFLINE PROGRAMMING: Create the entire program in
SLC Loop
your office using a Windows®-based software package(order
ANN-80
programming kit PK-CD, containing PS-Tools, separately).
Upload/download system programming locally.
Printer
User interface
SD355
Photo Detector Gateway
ANN-S/PG
LED INDICATORS
• AC Power (green)
• Fire Alarm (red)
• Supervisory (yellow)
AD355
Adapt Detector
Graphic LED Module • Trouble (yellow)
ANN-I/O
• Alarm Silenced signals (yellow)
KEYPAD
• 16 key alpha-numeric pad
H355/H355R/H355HT Relay Module • Acknowledge/Step
Heat Detector ANN-RLY
P2R • Alarm Silenced
Strobe • Drill (Manual Evacuate)
• Reset (lamp test)
MDF-300 Product Line Information
Dual Monitor Module
P2R MS-9050UD(E): Combination DACT/Fire Alarm Control Panel
Strobe with one SLC loop. Includes main circuit board with display,
Power Supply chassis with transformer, backbox with door, plastic bag contain-
FCPS-24FS6
FCPS-24FS8 ing screws, cables, key, etc., manual. (For MS-9050UDC, refer
to DF-60445.)
SD355T
Photo/Thermal PK-CD: Contains PS-Tools programming software for Win-
P2R dows®-based PC computer (cable not included).
Strobe
DP-51050: Optional dress panel for the MS-9050UD.
TR-CE: Optional trim ring for semi-flush mounting.
Multi-Modules
MMF-300 • CRF-300-6 Six-Relay Control Module BB-2F: Optional cabinet for one or two modules.
Monitor Module
• CMF-300-6 Six-Circuit Supervised Control Module BB-6F: Optional cabinet for up to six modules mounted on
• MMF-302-6 Six-Zone Interface Module CHS-6 chassis.
• MMF-300-10 Ten-Input Monitor Module
BB-26: Battery backbox, holds up to two 25 AH batteries and
CHG-75.
MMF-302 BB-55F: Battery box, houses two 55 AH batteries
2-Wire Detector
Monitor Module CHS-6: Chassis, mounts up to six multi-modules in a BB-6F
cabinet.
CHG-75: Battery charger for lead-acid batteries with a rating of
25 to 75 AH.
Beam Detector CHG-120F: Remote battery charging system for lead-acid bat-
D355PL
Duct Detector BEAM-335/(S) teries with a rating of 55 to 120 AH. Requires additional BB-55F
for mounting.
BAT Series: Batteries, see data sheet DF-52397.
MS-9050UD PRT/PK-CABLE: Cable printer/personal computer interface
cable.
ADDRESSABLE FIRE ALARM PRN-6F: UL listed compatible event printer. Uses tractor-fed
BG-12LX Addressable CONTROL PANEL paper.
Manual Pull Station
IPDACT, IPDACT-2/2UD Internet Monitoring Module: Mounts
in bottom of enclosure with optional mounting kit (PN IPBRKT).
Connects to primary and secondary DACT telephone output
ports for internet communications over customer provided ether-
Page 2 of 4 — DF-52418:E1 • 1/27/12
3. net internet connection. Requires compatible Teldat Visoralarm 4.0" (10.16 cm.) box. Includes plastic cover plate and end-of-line
Central Station Receiver. Can use DHCP or static IP. (See data resistor. Module may be configured for either a Style B (Class B)
sheet df-52424 for more information.) or Style D (Class A) IDC.
IPBRKT: Mounting kit for IPDACT-2/2UD in common enclosure. MDF-300: Dual Monitor Module. Same as MMF-300 except it
IPSPLT: Y-adaptor option allows connection of both panel dialer provides two Style B (Class B) only IDCs.
outputs to one IPDACT-2/2UD cable input. MMF-301: Miniature version of MMF-300. Excludes LED and
AC-TRMBLK: AC Terminal Block mounts to a metal bracket, in Style D option. Connects with wire pigtails. May mount in device
turn, mounts to the FACP chassis. Use AC-TRMBLK when wire backbox.
nuts are not allowed for AC connections to the transformer. MMF-302A: Similar to MMF-300A. Addressable Monitor Module
for one zone of conventional two-wire detectors. Requires reset-
OPTIONAL MODULES table 24 VDC power. Refer to the Device Compatibility Docu-
4XTMF Reverse Polarity Transmitter Module: Provides a ment for listed compatible devices and quantity limitation.
supervised output for local energy municipal box transmitter, CMF-300: Addressable Control Module for one Style Y/Z (Class
alarm and trouble. Includes a disable switch and disable trouble B/A) zone of supervised polarized Notification Appliances.
LED. Mounts directly to a 4.0" (10.16 cm.) electrical box. Notification
ANN-SEC: Optional secondary ANN-BUS interface module. Appliance Circuit option requires external 24 VDC to power noti-
Note: Used only with firmware 3.0 or higher. fication appliances.
CRF-300: Addressable relay module containing two isolated
COMPATIBLE ANNUNCIATORS sets of Form-C contacts, which operate as a DPDT switch.
ANN-80(-W): Remote LCD annunciator mimics the information Mounts directly to a 4.0" (10.16 cm.) box, surface mount using
displayed on the FACP LCD display. Recommended wire type is the SMB500.
un-shielded. (Basic model is red; order -W version for white; see
BG-12LX: Addressable manual pull station with interface mod-
DF-52417.)
ule mounted inside.
ANN-I/O: LED Driver Module provides connections to a user
I300: This module isolates the SLC loop from short circuit condi-
supplied graphic annunciator. (See DF-52430.)
tions (required for Style 6 or 7 operation).
ANN-LED: Annunciator Module provides three LEDs for each
SMB500: Used to mount all modules except the MMF-301 and
zone: Alarm, Trouble, and Supervisory. Ships with red enclo-
M301.
sure. (See DF-60241.)
MMF-300-10: Ten-input monitor module. Mount one or two mod-
ANN-RLED: Provides alarm (red) indicators for up to 30 input
ules in a BB-2F cabinet (optional). Mount up to six modules on a
zones or addressable points. (See DF-60241.)
CHS-6 chassis in a BB-6F cabinet.
ANN-RLY: Relay Module provides 10 programmable Form-C
MMF-302-6: Six-zone interface module. Mount one or two mod-
relays. Can be mounted inside the cabinet. (See DF-52431.)
ules in a BB-2F cabinet (optional). Mount up to six modules on a
ANN-S/PG: Serial/Parallel Printer Gateway module provides a CHS-6 chassis in a BB-6F cabinet.
connection for a serial or parallel printer. (See DF-52429.)
CMF-300-6: Six-circuit supervised control module. Mount one or
ADDRESSABLE DEVICES two modules in a BB-2F cabinet (optional). Mount up to six mod-
ules on a CHS-6 chassis in a BB-6F cabinet.
All feature a polling LED and rotary switches for addressing.
CRF-300-6: Six-relay control module (Form-C relays). Mount
CP355: Addressable low-profile ionization smoke detector. one or two modules in a BB-2F cabinet (optional). Mount up to
SD355: Addressable low-profile photoelectric smoke detector. six modules on a CHS-6 chassis in a BB-6F cabinet.
SD355T: Addressable low-profile photoelectric smoke detector NOTE: For more information on Compatible Addressable Devices
with thermal sensor. for use with the MS-9050UD, see the following data sheets (docu-
SD355R: Remote test capable addressable photoelectric ment numbers): AD355 (DF-52386), BG-12LX (DF-52013), CMF-
smoke detector for use with DNR(W) duct detector housing. 300-6 (DF-52365), CRF-300-6 (DF-52374), CMF/CRF Series (DF-
52130), CP355 (DF-52383), H355 Series (DF-52385), I300 (DF-
H355: Fast-response, low-profile heat detector. 52389), MMF-300 Series/MDF-300 (DF-52121), MMF-300-10
H355R: Fast-response, low-profile heat detector with rate-of- (DF-52347), MMF-302-6 (DF-52356), SD355/SD355T (DF-
rise option. 52384).
H355HT: Fast-response, low-profile heat detector that activates ADDRESSABLE DEVICE ACCESSORIES
at 190°F/88°C.
End-of-Line Resistor Assembly (R-47K and R-3.9K): The
AD355: Low-profile, intelligent, “Adapt” multi-sensor detector 47k ohm assembly supervises the MMF-300, MDF-300, MMF-
(B350LP base included). 301, and CMF-300 module circuits. The 3.9k ohm assembly
BEAM355: Intelligent beam smoke detector. supervises the MMF-302 module circuit. These resistors are
included with each module.
BEAM355S: Intelligent beam smoke detector with integral sen-
sitivity test. Power Supervision Relay: Supervises the power to 4-wire
smoke detectors and notification appliances.
D355PL: InnovairFlex low-flow non-relay duct-detector housing;
includes SD355R.
DNR: InnovairFlex low-flow non-relay duct-detector housing.
Wiring Requirements
(Order SD355R separately.) While shielded wire is not required, it is recommended that all
DNRW: InnovairFlex low-flow non-relay duct-detector housing, SLC wiring be twisted-pair to minimize the effects of electrical
with NEMA-4 rating. Watertight. (Order SD355R separately.) interference. Refer to the panel manual for wiring details.
MMF-300: Addressable Monitor Module for one zone of nor-
mally-open dry-contact initiating devices. Mounts in standard
DF-52418:E1 • 1/27/12 — Page 3 of 4