2. The motherboard is a printed Circuit Board(PCB) that is
the function of a computer and allows the CPU,RAM and
all other computer hardware componenets to function .
3.
4. Most Important Port In
Motherboard
•Keyboard and mouse port
•Parallel port and serial port
•Processor socket
•AGP slot
•PCI slot
•CMOS Battery
•ISA Slot
•Date and connector
•Memory Slot
•Floppy Port
•Fan Header
•Main Power Connecter
5. •KEYBOARD AND MOUSE PORT
This port connected to motherboard
which work is an input device of
computer. This port called are PS2 Port.
6. This port can used for scanners and printers.This port also
called printer port .This port can data tarvels at 2 MB/SEC
Its can connect external modems and older mouse .This port
can data transfer at 115kilobites per second.
7. The Accelerates graphics port (AGP) is a high s[peed to
point channel for attaching a video card to a computer’s
motherboard which called AGP salt
8. •The PCI Port is used input and output device main logic the
computer
•The ISA SLOT is standard architecture of the expansion bus
•The CMOS BATTERY will last the life time of a MOTHERBOARD(up
to 10 years in most cases)but will need to be replaced . Incorrect or
slow system date and time and loss of BIOS.
9. INDUSTRY STANDARD ARCHITECTURE Is the 16 Bit Internal Bus
.Moyherboard may contain some slot to connect ISA slot.
Video card ,sound card, graphics card and modem etc port in
attaching in motherboard also called DATA CARD CONNECTOR
10. A Memory Slot ,memory socket, RAM slot is what allows RAM to be
inserted into the computer depending on the motherboard there may be
too to four memory slot and are what determine the type of RAM used
the motherboard
A floppy port is a ribbon port found in pc’s that allow one or more floppy
disk drives to be connected to a computer
11. The case has two intake fans and one exhaust fan, and one optional
exhaust fan. The motherboard has these fan power connector: 4-pin
chassis fan connector.
This is the most imported port in motherboard which connect in
main line to pc. the various voltages and others signal are sent
between these two important devices.