Metal RubberMetal Rubber
Metal Rubber is a unique self-assembledMetal Rubber is a unique self-assembled
nancomposite material that combines the highnancomposite material that combines the high
electrical conductivity of metals with the lowelectrical conductivity of metals with the low
mechanical modulus of elastomers. The self-mechanical modulus of elastomers. The self-
assembly process allows the simultaneousassembly process allows the simultaneous
modification of both conductivity and modulusmodification of both conductivity and modulus
during manufacturing. Maximum electricalduring manufacturing. Maximum electrical
conductivity is 5x10-6 W cm. Maximumconductivity is 5x10-6 W cm. Maximum
elongation is approximately 200%. The electricalelongation is approximately 200%. The electrical
conductivity varies slightly with elongation.conductivity varies slightly with elongation.
Introduction
CostCost
• Small sheet of 6 inch²
x 1 mm think cost
$1000
• Large sheet of 12
inch² x 1 mm
thick$5000
• Rectangular strip
samples 2.5 inch
long, 0.5 inch wide, 1
mm thick $500 for
pack of five
What's so SpecialWhat's so Special
• stretch to about 200 to 300 percent of its
original length and completely reform
• withstand exposure to many different
kinds of chemicals (from jet fuel to
acetone)
• withstand extreme temperature
• heated up to 700 degrees Fahrenheit, and
cooled to minus 167 degrees Fahrenheit
• Can be boiled overnight in water
Future usesFuture uses
• flexible artificial limbs
• aircraft wings with both sturdiness and
more give
• bendable circuits that would make your
laptop or cell phone more durable
• stents and other biomedical products
• Cars and seat cushions
• flexible TVs you can carry in your pocket
Future usesFuture uses
• flexible artificial limbs
• aircraft wings with both sturdiness and
more give
• bendable circuits that would make your
laptop or cell phone more durable
• stents and other biomedical products
• Cars and seat cushions
• flexible TVs you can carry in your pocket

Metal rubber

  • 1.
  • 2.
    Metal Rubber isa unique self-assembledMetal Rubber is a unique self-assembled nancomposite material that combines the highnancomposite material that combines the high electrical conductivity of metals with the lowelectrical conductivity of metals with the low mechanical modulus of elastomers. The self-mechanical modulus of elastomers. The self- assembly process allows the simultaneousassembly process allows the simultaneous modification of both conductivity and modulusmodification of both conductivity and modulus during manufacturing. Maximum electricalduring manufacturing. Maximum electrical conductivity is 5x10-6 W cm. Maximumconductivity is 5x10-6 W cm. Maximum elongation is approximately 200%. The electricalelongation is approximately 200%. The electrical conductivity varies slightly with elongation.conductivity varies slightly with elongation. Introduction
  • 3.
    CostCost • Small sheetof 6 inch² x 1 mm think cost $1000 • Large sheet of 12 inch² x 1 mm thick$5000 • Rectangular strip samples 2.5 inch long, 0.5 inch wide, 1 mm thick $500 for pack of five
  • 4.
    What's so SpecialWhat'sso Special • stretch to about 200 to 300 percent of its original length and completely reform • withstand exposure to many different kinds of chemicals (from jet fuel to acetone) • withstand extreme temperature • heated up to 700 degrees Fahrenheit, and cooled to minus 167 degrees Fahrenheit • Can be boiled overnight in water
  • 5.
    Future usesFuture uses •flexible artificial limbs • aircraft wings with both sturdiness and more give • bendable circuits that would make your laptop or cell phone more durable • stents and other biomedical products • Cars and seat cushions • flexible TVs you can carry in your pocket
  • 6.
    Future usesFuture uses •flexible artificial limbs • aircraft wings with both sturdiness and more give • bendable circuits that would make your laptop or cell phone more durable • stents and other biomedical products • Cars and seat cushions • flexible TVs you can carry in your pocket