1. The document presents cost and production data for two models, Model 101 and Model 102, including direct labor costs, variable overhead costs, selling prices, contribution margins, and fixed overhead costs.
2. An optimization model is formulated to maximize total profit by determining the optimal production quantities of each model, subject to various capacity constraints.
3. Sensitivity analysis shows that 500 additional units of engine assembly capacity can be added before it impacts the optimal production decision, and profit would increase by $2000 for every additional 100 units of capacity.
Manzana Insurance is the second largest insurance company founded in California in 1902. • They operated through a network of autonomous branch offices in California, Oregon and Washington. Each branch is treated as a separate profit and loss centre. • Manzana does not directly interact with public but instead has its 2000 agents who represents Manzana. • Fruitvale was one of the Manzana’s smaller branches, with 3 underwriting teams and 76 agents. Our case concern is the falling performance and hence the profitability on Property Insurance for this branch.
Manzana Insurance is the second largest insurance company founded in California in 1902. • They operated through a network of autonomous branch offices in California, Oregon and Washington. Each branch is treated as a separate profit and loss centre. • Manzana does not directly interact with public but instead has its 2000 agents who represents Manzana. • Fruitvale was one of the Manzana’s smaller branches, with 3 underwriting teams and 76 agents. Our case concern is the falling performance and hence the profitability on Property Insurance for this branch.
Aqualisa Quartz - Simply A Better Shower (HBR Case Study)Arjun Parekh
Probable Solution to HBR Case on Aqualisa Quartz. The Presentation consists of info about Channel Distribution, Development of Quartz Shower Valve, UK Shower Market, Initial Sales Results, 4Ps of Marketing for Aqualisa, A shift in Marketing Strategy.
Aqualisa Quartz - Simply A Better Shower (HBR Case Study)Arjun Parekh
Probable Solution to HBR Case on Aqualisa Quartz. The Presentation consists of info about Channel Distribution, Development of Quartz Shower Valve, UK Shower Market, Initial Sales Results, 4Ps of Marketing for Aqualisa, A shift in Marketing Strategy.
Medical casting procedure is harnessed extensively for manufacturing components of a variety of diagnostic equipment. This process entails x-ray examination, ‘chemical and physical testing’, and ‘fluorescent penetrant investigation’. Investment Casting is a key process in manufacturing quality industrial components such as Medical Implants or orthopaedic implants. It is possible to apply the process to a wide range of alloys and metal cast and can be used for manufacturing a different type of castings parts.
We are Pioneers to manufacturing a Medical implant & other medical components castings and offer wide range of investment casting products to our valuable clients at industry leading prices. We are popular for manufacturing superior quality of implant castings in the field of medical industry. We offer you medical casting with low cost, long-lasting and reliable medical castings to our customer at most reasonable rates.
Application For Medical Investment Casting:
Bone Plates
Orthopedic Implants And Orthopedic Instruments Casting
Bone Screw
Locking Screw
Locking Plates
Medical Implants
This ppt was made for the competition in IIT Chennai, DOMS. The competition was about finding innovation gap and come up with a new product to flll the gap and prepare its business plan.
How to Split Bills in the Odoo 17 POS ModuleCeline George
Bills have a main role in point of sale procedure. It will help to track sales, handling payments and giving receipts to customers. Bill splitting also has an important role in POS. For example, If some friends come together for dinner and if they want to divide the bill then it is possible by POS bill splitting. This slide will show how to split bills in odoo 17 POS.
Model Attribute Check Company Auto PropertyCeline George
In Odoo, the multi-company feature allows you to manage multiple companies within a single Odoo database instance. Each company can have its own configurations while still sharing common resources such as products, customers, and suppliers.
Operation “Blue Star” is the only event in the history of Independent India where the state went into war with its own people. Even after about 40 years it is not clear if it was culmination of states anger over people of the region, a political game of power or start of dictatorial chapter in the democratic setup.
The people of Punjab felt alienated from main stream due to denial of their just demands during a long democratic struggle since independence. As it happen all over the word, it led to militant struggle with great loss of lives of military, police and civilian personnel. Killing of Indira Gandhi and massacre of innocent Sikhs in Delhi and other India cities was also associated with this movement.
Read| The latest issue of The Challenger is here! We are thrilled to announce that our school paper has qualified for the NATIONAL SCHOOLS PRESS CONFERENCE (NSPC) 2024. Thank you for your unwavering support and trust. Dive into the stories that made us stand out!
We all have good and bad thoughts from time to time and situation to situation. We are bombarded daily with spiraling thoughts(both negative and positive) creating all-consuming feel , making us difficult to manage with associated suffering. Good thoughts are like our Mob Signal (Positive thought) amidst noise(negative thought) in the atmosphere. Negative thoughts like noise outweigh positive thoughts. These thoughts often create unwanted confusion, trouble, stress and frustration in our mind as well as chaos in our physical world. Negative thoughts are also known as “distorted thinking”.
How to Make a Field invisible in Odoo 17Celine George
It is possible to hide or invisible some fields in odoo. Commonly using “invisible” attribute in the field definition to invisible the fields. This slide will show how to make a field invisible in odoo 17.
Palestine last event orientationfvgnh .pptxRaedMohamed3
An EFL lesson about the current events in Palestine. It is intended to be for intermediate students who wish to increase their listening skills through a short lesson in power point.
1. Section 1 ; Group 2
FT 12113 Anuja Dash
FT 12102 Abhay Bohra
FT 12189 Pramod Ravi Shankar
FT 12127 Harendra Singh
FT 12168 Tushar Arora
FT 12104 Abhilash Mohapatra
2. Specification Model 101 Model 102
DM 24000 20000
Direct Labour
Engine assembly 1200 2400
Metal Stamping 800 600
Final Assembly 2000 1500
Total DL 4000 4500
Variable Overhead
Engine assembly 2100 4000
Metal Stamping 2400 2000
Final Assembly 3500 2500
Total Variable Overhead 8000 8500
Selling Prices 39000 38000
Total Variable Cost 36000 33000
Contribution Margin per Unit 3000 5000
Section 1: Group 2: PAAATH 4/8/2012 2
3. Fixed Overhead
Engine assembly 1700000
Metal Stamping 2700000
Final Assembly 2700000 1500000
Total Fixed Over Head 8600000
Section 1: Group 2: PAAATH 4/8/2012 3
4. Engine Assembly 1* Model 101 2* Model 102 <= 4000
Metal Stamping 2* Model 101 2* Model 102 <= 6000
Model 101 assembly 2* Model 101 0* Model 102 <= 5000
Model 102 assembly 0* Model 101 3* Model 102 <= 4500
Non Negative Model 101 1* Model 101 0* Model 102 >= 0
Non Negative Model 102 0* Model 101 1* Model 102 >= 0
Maximize Profit = UCM Model 101*units Model 101+ UCM Model
102*units Model 102 -Fixed Overheads
Section 1: Group 2: PAAATH 4/8/2012 4
5. Variables
Model 101 Model 102 Objective
2000 1000 2400000
Section 1: Group 2: PAAATH 4/8/2012 5
6. Sensitivity Analysis
Final Reduced Objective Allowable Allowable
Name Value Cost Coefficient Increase Decrease
Model 101 2000 0 3000 2000 500
Model 102 1000 0 5000 1000 2000
Final Shadow Constraint Allowable Allowable
Name Value Price R.H. Side Increase Decrease
Engine Assembly 4000 2000 4000 500 500
Metal Stamping 6000 500 6000 500 1000
Model 101 assembly 4000 0 5000 1E+30 1000
Model 102 assembly 3000 0 4500 1E+30 1500
Non Negative Model 101 2000 0 0 2000 1E+30
Non Negative Model 102 1000 0 0 1000 1E+30
Section 1: Group 2: PAAATH 4/8/2012 6
7. Shadow price of Engine Assembly is 2000 $
So if Assembly unit capacity is increased from 4000 to 4001 then
Extra unit Engine Assembly capacity is worth 2000$
Variables
Model 101 Model 102 Objective
1999 1001 2402000
Section 1: Group 2: PAAATH 4/8/2012 7
8. If capacity of Engine Assembly is increased to 4100
Increase in profit due to 100 unit increase in production capacity
=2600000-2400000
=200000
Variables
Model 101 Model 102 Objective
1900 1100 2600000
Section 1: Group 2: PAAATH 4/8/2012 8
9. 500 Units of Engine Assembly capacity can be added before it capacity
worth changes.
Profit at 4500 & 4501 is same i.e. production decision does not change
Objective
3400000
Variables
Model 101 Model 102
1500 1500
Section 1: Group 2: PAAATH 4/8/2012 9
10. Max We can have 500 Hr increase in capacity and profit Contribution
Increase 2000$ per hr
So max we can pay that much
Variables
Model 101 Model 102 Objective
1500 1500 3400000
Section 1: Group 2: PAAATH 4/8/2012 10
11. Constraints
Engine Assembly 1 2 0.8 4000 <= 4000
Metal Stamping 2 2 1.5 6000 <= 6000
Model 101 assembly 2 0 1 4000 <= 5000
Model 102 assembly 0 3 0 3000 <= 4500
Non Negative Model 101 1 0 0 2000 >= 0
Non Negative Model 102 0 1 0 1000 >= 0
Non Negative Model 103 0 0 1 0 >= 0
Profit= UCM Model 101*units Model 101+ UCM Model 102*units
Model 102+ UCM Model 103*units Model 103 - Fixed overheads
Section 1: Group 2: PAAATH 4/8/2012 11
12. We should not produce Model103
Variables
Model 101 Model 102 Model103 Objective
2000 1000 0 2400000
Section 1: Group 2: PAAATH 4/8/2012 12
13. Final Reduced Objective Allowable Allowable
Name Value Cost Coefficient Increase Decrease
Model 101 2000 0 3000 2000 500
Model 102 1000 0 5000 1000 2000
Model103 0 0 2000 350 1E+30
Final Shadow Constraint Allowable Allowable
Name Value Price R.H. Side Increase Decrease
Engine Assembly 4000 2000 4000 500 500
Metal Stamping 6000 500 6000 500 1000
Model 101 assembly 4000 0 5000 1E+30 1000
Model 102 assembly 3000 0 4500 1E+30 1500
Non Negative Model 101 2000 0 0 2000 1E+30
Non Negative Model 102 1000 0 0 1000 1E+30
Non Negative Model 103 0 -350 0 2857.142857 0
Section 1: Group 2: PAAATH 4/8/2012 13
14. Model 103 CM should be more than > 2350 in order to make it worthy
of production
With 2351 CM for Model 103 we get the following production schedule
Variables
Model 101 Model 102 Model103 Objective
0 857.14286 2857.1429 2402857
Section 1: Group 2: PAAATH 4/8/2012 14
15. Clearly from sensitivity analysis 500 Units of Engine Assembly capacity can be
added. More than that will make no improvement
Variables
Model 101 Model 102 Objective
2000 1000 2400000
Section 1: Group 2: PAAATH 4/8/2012 15
16. Constraints
Engine Assembly 1 2 4500 <= 6000
Metal Stamping 2 2 6000 <= 6000
Model 101 assembly 2 0 3000 <= 5000
Model 102 assembly 0 3 4500 <= 4500
Non Negative Model 101 1 0 1500 >= 0
Non Negative Model 102 0 1 1500 >= 0
Section 1: Group 2: PAAATH 4/8/2012 16
17. So Additional revenue =-50000$
Variables
Model 101 Model 102 Objective
1500 1500 3400000
New Contribution 3400000
Increase in fixed cost 750000
Increase in labour 250*3600$ 900000
labour Cost saving 500*1200$ 600000
Net Contribution 2350000
Section 1: Group 2: PAAATH 4/8/2012 17
18. We have to add new constraint of product mix
Constraints
Engine Assembly 1 2 <= 4000
Metal Stamping 2 2 <= 6000
Model 101 assembly 2 0 <= 5000
Model 102 assembly 0 3 <= 4500
Non Negative Model 101 1 0 >= 0
Non Negative Model 102 0 1 >= 0
Product ratio Constraint -1 3 = 0
Section 1: Group 2: PAAATH 4/8/2012 18
19. Additional Contribution Due to this decision is =2400000$ - 1900000$
=500000$
Variables
Model 101 Model 102 Objective
2250 750 1900000
Section 1: Group 2: PAAATH 4/8/2012 19