Intro to 3D Design and Printing for the Absolute Beginner
1.
2. MY
BOSS
"We see the library as not being in the
book business, but being in the learning
business and the exploration business
and the expand-your-mind business."
3. “The way people used to
use libraries had a lot in
common with the way they’d
shop at supermarkets.
“Now we’re incorporating
more aspects of the
kitchen.”
14. Software
1. Tries to sell you stuff all the time
2. Pro versions are very expensive
3. Learning curve steep for casual
users
4. Hard to make smaller objects
15. Software
Makerware:
slices up your
object and
sends it to the
Makerbot
MakerWare is not a
design program.
The object is built
from the bottom
up, one sliver at a
time.
16. Thingiverse
clearinghouse for the 3D designs of others.
Allows you to download and alter according to
Creative Commons licensing.
http://www.thingiverse.com/thing:130412
17. GETTING STARTED
Sign-up can
Sign-up can
take aafew
take few
minutes to
minutes to
process!
process!
Create accounts with TinkerCad and
Thingiverse
30. Put the object on the platform
ADD brings Navigate to
your file
your
into the program.file
31. Rafts and Supports
Should be removed from the project when it is finished printing.
Supports help prints with extreme overhangs.
If you have an overhang that extends out at
greater than 45 degrees, then you need a
support.
Rafting helps with uneven shapes or prints that have trouble sticking to the build plate
32. The Magical Preview Button!
Put the object on the platform
ADD brings Navigate to
your file
your
Click MAKE to preview
into the program.file
IMPORTANT!
33. ALL these presets can stay the same.
Put the object on the platform
ADD brings Navigate to
your file
your
into the program.file
These are up to you
34. The Magical Preview Button!
Put the object on the platform
ADD brings Navigate to
your file
your
into the program.file
Won’t effect prints in
progress
35. The Magical Preview Button!
How long will this take?
What this thing will
actually look like!
38. The Magical Preview Button!
Put the object on the platform
ADD brings Navigate to
your file
your
into the program.file
Do it! You know you
want to.
40. MAKERBOT MAINTENANCE
The 2 things that cause the most problems are:
Unleveled build plate
Wedging
Velcro-ing
Misalignment
Bad PLA Load
Air Printing
PLA feeder Clicking
Filament wadding at head
•
•
•
•
•
•
41. MAKERBOT MAINTENANCE
Wonky PLA load
trim the end of the filament before loading and
don’t be afraid of pushing too hard when
loading.
Staff can’t load and unload spools. The color
that is on is the color your print will be.
Depending on your audience, this might be too rudimentary. I get retired engineers in to the lab and they look disappointed in me when I steer them towards TC
Has amazing warehouse of goods you can import and use/mash-up