The document provides information on the LM555 timer integrated circuit. It can be used to generate accurate time delays or oscillations. In monostable mode, the time is controlled by one external resistor and capacitor. In astable mode, frequency and duty cycle are controlled by two resistors and one capacitor. It has applications in precision timing, pulse generation, and more. Key specifications and electrical characteristics are provided.
This presentation covers information, tips and resources presented to the Kansas Rental Dealer's Association. The slide content includes author notes, links and industry relavent information. March 2011 WGC.
This presentation covers information, tips and resources presented to the Kansas Rental Dealer's Association. The slide content includes author notes, links and industry relavent information. March 2011 WGC.
Marketing has changed, some of the change is obvious, but I want to talk briefly about one of the subtle changes that affects you, and your ability to grow your business using all of the new online tools...that is a basic
shift in the way you may find and keep customers with today’s business climate. And it’s a fundamental change in the way most small business owners think about their marketing – but it works. We see it working every day using the tools of Email and Social Media Marketing/ Engagement!
Email Marketing presentation for Startups and new business entrepreneurs. Topics include: Why Small Businesses and Non-Profits Use Email, What is SPAM, 5 Tips to Improve Your Email Marketing Results, What is the 2 x 2 x 2 Principle, How to Get Your Emails Opened, How an Email Service Provider Can Make Your Life Easier, How You Can Listen, Learn & EARN from Email Reports, Next Steps
Social Media Marketing presentation Kansas Pharmacy Association Continuing Education Session, Sept 29. Topics include: Why Businesses Use Social Media, What Social Media “Is” and “Is not,” 10 Tips to “Go & Grow” Your Social Media, Free & Cool Tools, Ways to Grow Your Social Community, Tips to Craft Up Content
Email Marketing presentation Kansas Pharmacy Association Continuing Education Session, Sept 29. Topics include: Why Small Businesses and Non-Profits Use Email, What is SPAM, 5 Tips to Improve Your Email Marketing Results, What is the 2 x 2 x 2 Principle, How to Get Your Emails Opened, How an Email Service Provider Can Make Your Life Easier, How You Can Listen, Learn & EARN from Email Reports, Next Steps
Creating Social Strategy, Tips, Tools & Cheats!
A quick reference guide for Entrepreneurs who are seeking to utilize the Tools of Social Media Marketing & Customer Resource Management (CRM) for a small business (or any business).
Look forward to your comments back about the content. Fair quantity of notes & Links embedded in the PPT.
Presentation given to the Kansas Young Entrepreneurs Workshop. Covering the basics of Social Media Marketing, SEO and building a professional and personable presence online.
Topics Covered with Author Notes & Industry Data
Why Businesses Use Social Media
What Social Media “Is” and “Is not”
10 Tips to “Go & Grow” Your Social Media
Free & Cool Tools
Ways to Grow Your Social Community
Tips to Craft Up Content
Topics Covered with Author Notes & Industry Data
Introduction to Pinterest
Why Businesses Use Pinterest
Creating An Account & Getting Followers
Using Pinterest for Marketing
Tips to Craft Up Content
Brand Examples
How to Split Bills in the Odoo 17 POS ModuleCeline George
Bills have a main role in point of sale procedure. It will help to track sales, handling payments and giving receipts to customers. Bill splitting also has an important role in POS. For example, If some friends come together for dinner and if they want to divide the bill then it is possible by POS bill splitting. This slide will show how to split bills in odoo 17 POS.
Operation “Blue Star” is the only event in the history of Independent India where the state went into war with its own people. Even after about 40 years it is not clear if it was culmination of states anger over people of the region, a political game of power or start of dictatorial chapter in the democratic setup.
The people of Punjab felt alienated from main stream due to denial of their just demands during a long democratic struggle since independence. As it happen all over the word, it led to militant struggle with great loss of lives of military, police and civilian personnel. Killing of Indira Gandhi and massacre of innocent Sikhs in Delhi and other India cities was also associated with this movement.
Students, digital devices and success - Andreas Schleicher - 27 May 2024..pptxEduSkills OECD
Andreas Schleicher presents at the OECD webinar ‘Digital devices in schools: detrimental distraction or secret to success?’ on 27 May 2024. The presentation was based on findings from PISA 2022 results and the webinar helped launch the PISA in Focus ‘Managing screen time: How to protect and equip students against distraction’ https://www.oecd-ilibrary.org/education/managing-screen-time_7c225af4-en and the OECD Education Policy Perspective ‘Students, digital devices and success’ can be found here - https://oe.cd/il/5yV
Unit 8 - Information and Communication Technology (Paper I).pdfThiyagu K
This slides describes the basic concepts of ICT, basics of Email, Emerging Technology and Digital Initiatives in Education. This presentations aligns with the UGC Paper I syllabus.
The French Revolution, which began in 1789, was a period of radical social and political upheaval in France. It marked the decline of absolute monarchies, the rise of secular and democratic republics, and the eventual rise of Napoleon Bonaparte. This revolutionary period is crucial in understanding the transition from feudalism to modernity in Europe.
For more information, visit-www.vavaclasses.com
The Art Pastor's Guide to Sabbath | Steve ThomasonSteve Thomason
What is the purpose of the Sabbath Law in the Torah. It is interesting to compare how the context of the law shifts from Exodus to Deuteronomy. Who gets to rest, and why?
Welcome to TechSoup New Member Orientation and Q&A (May 2024).pdfTechSoup
In this webinar you will learn how your organization can access TechSoup's wide variety of product discount and donation programs. From hardware to software, we'll give you a tour of the tools available to help your nonprofit with productivity, collaboration, financial management, donor tracking, security, and more.
This is a presentation by Dada Robert in a Your Skill Boost masterclass organised by the Excellence Foundation for South Sudan (EFSS) on Saturday, the 25th and Sunday, the 26th of May 2024.
He discussed the concept of quality improvement, emphasizing its applicability to various aspects of life, including personal, project, and program improvements. He defined quality as doing the right thing at the right time in the right way to achieve the best possible results and discussed the concept of the "gap" between what we know and what we do, and how this gap represents the areas we need to improve. He explained the scientific approach to quality improvement, which involves systematic performance analysis, testing and learning, and implementing change ideas. He also highlighted the importance of client focus and a team approach to quality improvement.
Palestine last event orientationfvgnh .pptxRaedMohamed3
An EFL lesson about the current events in Palestine. It is intended to be for intermediate students who wish to increase their listening skills through a short lesson in power point.
Digital Tools and AI for Teaching Learning and Research
Lm555
1. TL H 7851
LM555LM555CTimer
February 1995
LM555 LM555C Timer
General Description
The LM555 is a highly stable device for generating accurate
time delays or oscillation Additional terminals are provided
for triggering or resetting if desired In the time delay mode
of operation the time is precisely controlled by one external
resistor and capacitor For astable operation as an oscilla-
tor the free running frequency and duty cycle are accurately
controlled with two external resistors and one capacitor
The circuit may be triggered and reset on falling waveforms
and the output circuit can source or sink up to 200 mA or
drive TTL circuits
Features
Y Direct replacement for SE555 NE555
Y Timing from microseconds through hours
Y Operates in both astable and monostable modes
Y Adjustable duty cycle
Y Output can source or sink 200 mA
Y Output and supply TTL compatible
Y Temperature stability better than 0 005% per C
Y Normally on and normally off output
Applications
Y Precision timing
Y Pulse generation
Y Sequential timing
Y Time delay generation
Y Pulse width modulation
Y Pulse position modulation
Y Linear ramp generator
Schematic Diagram
TL H 7851–1
C1995 National Semiconductor Corporation RRD-B30M115 Printed in U S A
2. Absolute Maximum Ratings
If Military Aerospace specified devices are required
please contact the National Semiconductor Sales
Office Distributors for availability and specifications
Supply Voltage a18V
Power Dissipation (Note 1)
LM555H LM555CH 760 mW
LM555 LM555CN 1180 mW
Operating Temperature Ranges
LM555C 0 C to a70 C
LM555 b55 C to a 125 C
Storage Temperature Range b65 C to a150 C
Soldering Information
Dual-In-Line Package
Soldering (10 Seconds) 260 C
Small Outline Package
Vapor Phase (60 Seconds) 215 C
Infrared (15 Seconds) 220 C
See AN-450 ‘‘Surface Mounting Methods and Their Effect
on Product Reliability’’ for other methods of soldering sur-
face mount devices
Electrical Characteristics (TA e 25 C VCC e a5V to a15V unless othewise specified)
Limits
Parameter Conditions LM555 LM555C Units
Min Typ Max Min Typ Max
Supply Voltage 4 5 18 4 5 16 V
Supply Current VCC e 5V RL e % 3 5 3 6 mA
VCC e 15V RL e % 10 12 10 15 mA
(Low State) (Note 2)
Timing Error Monostable
Initial Accuracy 0 5 1 %
Drift with Temperature RA e 1k to 100 kX 30 50 ppm C
C e 0 1 mF (Note 3)
Accuracy over Temperature 1 5 1 5 %
Drift with Supply 0 05 0 1 % V
Timing Error Astable
Initial Accuracy 1 5 2 25 %
Drift with Temperature RA RB e 1k to 100 kX 90 150 ppm C
C e 0 1 mF (Note 3)
Accuracy over Temperature 2 5 3 0 %
Drift with Supply 0 15 0 30 % V
Threshold Voltage 0 667 0 667 x VCC
Trigger Voltage VCC e 15V 4 8 5 5 2 5 V
VCC e 5V 1 45 1 67 1 9 1 67 V
Trigger Current 0 01 0 5 0 5 0 9 mA
Reset Voltage 0 4 0 5 1 0 4 0 5 1 V
Reset Current 0 1 0 4 0 1 0 4 mA
Threshold Current (Note 4) 0 1 0 25 0 1 0 25 mA
Control Voltage Level VCC e 15V 9 6 10 10 4 9 10 11 V
VCC e 5V 2 9 3 33 3 8 2 6 3 33 4 V
Pin 7 Leakage Output High 1 100 1 100 nA
Pin 7 Sat (Note 5)
Output Low VCC e 15V I7 e 15 mA 150 180 mV
Output Low VCC e 4 5V I7 e 4 5 mA 70 100 80 200 mV
2
3. Electrical Characteristics TA e 25 C VCC e a5V to a15V (unless othewise specified) (Continued)
Limits
Parameter Conditions LM555 LM555C Units
Min Typ Max Min Typ Max
Output Voltage Drop (Low) VCC e 15V
ISINK e 10 mA 0 1 0 15 0 1 0 25 V
ISINK e 50 mA 0 4 0 5 0 4 0 75 V
ISINK e 100 mA 2 2 2 2 2 5 V
ISINK e 200 mA 2 5 2 5 V
VCC e 5V
ISINK e 8 mA 0 1 0 25 V
ISINK e 5 mA 0 25 0 35 V
Output Voltage Drop (High) ISOURCE e 200 mA VCC e 15V 12 5 12 5 V
ISOURCE e 100 mA VCC e 15V 13 13 3 12 75 13 3 V
VCC e 5V 3 3 3 2 75 3 3 V
Rise Time of Output 100 100 ns
Fall Time of Output 100 100 ns
Note 1 For operating at elevated temperatures the device must be derated above 25 C based on a a150 C maximum junction temperature and a thermal
resistance of 164 c w (T0-5) 106 c w (DIP) and 170 c w (S0-8) junction to ambient
Note 2 Supply current when output high typically 1 mA less at VCC e 5V
Note 3 Tested at VCC e 5V and VCC e 15V
Note 4 This will determine the maximum value of RA a RB for 15V operation The maximum total (RA a RB) is 20 MX
Note 5 No protection against excessive pin 7 current is necessary providing the package dissipation rating will not be exceeded
Note 6 Refer to RETS555X drawing of military LM555H and LM555J versions for specifications
Connection Diagrams
Metal Can Package
TL H 7851–2
Top View
Order Number LM555H or LM555CH
See NS Package Number H08C
Dual-In-Line and Small Outline Packages
TL H 7851–3
Top View
Order Number LM555J LM555CJ
LM555CM or LM555CN
See NS Package Number J08A M08A or N08E
3
4. Typical Performance Characteristics
Required for Triggering
Minimuim Pulse Width
Supply Voltage
Supply Current vs
Output Source Current
High Output Voltage vs
Output Sink Current
Low Output Voltage vs
Output Sink Current
Low Output Voltage vs
Output Sink Current
Low Output Voltage vs
Voltage Level of Trigger Pulse
Output Propagation Delay vs
Voltage Level of Trigger Pulse
Output Propagation Delay vs
Voltage vs Sink Current
Discharge Transistor (Pin 7)
Voltage vs Sink Current
Discharge Transistor (Pin 7)
TL H 7851–4
4
5. Applications Information
MONOSTABLE OPERATION
In this mode of operation the timer functions as a one-shot
(Figure 1 ) The external capacitor is initially held discharged
by a transistor inside the timer Upon application of a nega-
tive trigger pulse of less than 1 3 VCC to pin 2 the flip-flop is
set which both releases the short circuit across the capaci-
tor and drives the output high
TL H 7851–5
FIGURE 1 Monostable
The voltage across the capacitor then increases exponen-
tially for a period of t e 1 1 RA C at the end of which time
the voltage equals 2 3 VCC The comparator then resets
the flip-flop which in turn discharges the capacitor and
drives the output to its low state Figure 2 shows the wave-
forms generated in this mode of operation Since the charge
and the threshold level of the comparator are both directly
proportional to supply voltage the timing internal is inde-
pendent of supply
TL H 7851–6
VCC e 5V Top Trace Input 5V Div
TIME e 0 1 ms DIV Middle Trace Output 5V Div
RA e 9 1 kX Bottom Trace Capacitor Voltage 2V Div
C e 0 01 mF
FIGURE 2 Monostable Waveforms
During the timing cycle when the output is high the further
application of a trigger pulse will not effect the circuit so
long as the trigger input is returned high at least 10 ms be-
fore the end of the timing interval However the circuit can
be reset during this time by the application of a negative
pulse to the reset terminal (pin 4) The output will then re-
main in the low state until a trigger pulse is again applied
When the reset function is not in use it is recommended
that it be connected to VCC to avoid any possibility of false
triggering
Figure 3 is a nomograph for easy determination of R C
values for various time delays
NOTE In monostable operation the trigger should be driv-
en high before the end of timing cycle
TL H 7851–7
FIGURE 3 Time Delay
ASTABLE OPERATION
If the circuit is connected as shown in Figure 4 (pins 2 and 6
connected) it will trigger itself and free run as a multivibrator
The external capacitor charges through RA a RB and dis-
charges through RB Thus the duty cycle may be precisely
set by the ratio of these two resistors
TL H 7851–8
FIGURE 4 Astable
In this mode of operation the capacitor charges and dis-
charges between 1 3 VCC and 2 3 VCC As in the triggered
mode the charge and discharge times and therefore the
frequency are independent of the supply voltage
5
6. Applications Information (Continued)
Figure 5 shows the waveforms generated in this mode of
operation
TL H 7851–9
VCC e 5V Top Trace Output 5V Div
TIME e 20 ms DIV Bottom Trace Capacitor Voltage 1V Div
RA e 3 9 kX
RB e 3 kX
C e 0 01 mF
FIGURE 5 Astable Waveforms
The charge time (output high) is given by
t1 e 0 693 (RA a RB) C
And the discharge time (output low) by
t2 e 0 693 (RB) C
Thus the total period is
T e t1 a t2 e 0 693 (RA a2RB) C
The frequency of oscillation is
f e
1
T
e
1 44
(RA a 2 RB) C
Figure 6 may be used for quick determination of these RC
values
D e
RB
RA a 2RB
The duty cycle is
TL H 7851–10
FIGURE 6 Free Running Frequency
FREQUENCY DIVIDER
The monostable circuit of Figure 1 can be used as a fre-
quency divider by adjusting the length of the timing cycle
Figure 7 shows the waveforms generated in a divide by
three circuit
TL H 7851–11
VCC e 5V Top Trace Input 4V Div
TIME e 20 ms DIV Middle Trace Output 2V Div
RA e 9 1 kX Bottom Trace Capacitor 2V Div
C e 0 01 mF
FIGURE 7 Frequency Divider
PULSE WIDTH MODULATOR
When the timer is connected in the monostable mode and
triggered with a continuous pulse train the output pulse
width can be modulated by a signal applied to pin 5 Figure
8 shows the circuit and in Figure 9 are some waveform
examples
TL H 7851–12
FIGURE 8 Pulse Width Modulator
TL H 7851–13
VCC e 5V Top Trace Modulation 1V Div
TIME e 0 2 ms DIV Bottom Trace Output Voltage 2V Div
RA e 9 1 kX
C e 0 01 mF
FIGURE 9 Pulse Width Modulator
PULSE POSITION MODULATOR
This application uses the timer connected for astable opera-
tion as in Figure 10 with a modulating signal again applied
to the control voltage terminal The pulse position varies
with the modulating signal since the threshold voltage and
hence the time delay is varied Figure 11 shows the wave-
forms generated for a triangle wave modulation signal
6
7. Applications Information (Continued)
TL H 7851–14
FIGURE 10 Pulse Position Modulator
TL H 7851–15
VCC e 5V Top Trace Modulation Input 1V Div
TIME e 0 1 ms DIV Bottom Trace Output 2V Div
RA e 3 9 kX
RB e 3 kX
C e 0 01 mF
FIGURE 11 Pulse Position Modulator
LINEAR RAMP
When the pullup resistor RA in the monostable circuit is
replaced by a constant current source a linear ramp is gen-
erated Figure 12 shows a circuit configuration that will per-
form this function
TL H 7851–16
FIGURE 12
Figure 13 shows waveforms generated by the linear ramp
The time interval is given by
T e
2 3 VCC RE (R1 a R2) C
R1 VCC b VBE (R1 a R2)
VBE j 0 6V
TL H 7851–17
VCC e 5V Top Trace Input 3V Div
TIME e 20 ms DIV Middle Trace Output 5V Div
R1 e 47 kX Bottom Trace Capacitor Voltage 1V Div
R2 e 100 kX
RE e 2 7 kX
C e 0 01 mF
FIGURE 13 Linear Ramp
50% DUTY CYCLE OSCILLATOR
For a 50% duty cycle the resistors RA and RB may be
connected as in Figure 14 The time period for the out-
7
8. Applications Information (Continued)
put high is the same as previous t1 e 0 693 RA C For the
output low it is t2 e
(RA RB) (RA a RB)
( C fin
RB b 2RA
2RB b RA (
Thus the frequency of oscillation is f e
1
t1 a t2
TL H 7851–18
FIGURE 14 50% Duty Cycle Oscillator
Note that this circuit will not oscillate if RB is greater than
1 2 RA because the junction of RA and RB cannot bring pin
2 down to 1 3 VCC and trigger the lower comparator
ADDITIONAL INFORMATION
Adequate power supply bypassing is necessary to protect
associated circuitry Minimum recommended is 0 1 mF in
parallel with 1 mF electrolytic
Lower comparator storage time can be as long as 10 ms
when pin 2 is driven fully to ground for triggering This limits
the monostable pulse width to 10 ms minimum
Delay time reset to output is 0 47 ms typical Minimum reset
pulse width must be 0 3 ms typical
Pin 7 current switches within 30 ns of the output (pin 3)
voltage
Physical Dimensions inches (millimeters)
Metal Can Package (H)
Order Number LM555H or LM555CH
NS Package Number H08C
8
9. Physical Dimensions inches (millimeters) (Continued)
Ceramic Dual-In-Line Package (J)
Order Number LM555J or LM555CJ
NS Package Number J08A
Small Outline Package (M)
Order Number LM555CM
NS Package Number M08A
9
10. LM555LM555CTimer
Physical Dimensions inches (millimeters) (Continued)
Molded Dual-In-Line Package (N)
Order Number LM555CN
NS Package Number N08E
LIFE SUPPORT POLICY
NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF NATIONAL
SEMICONDUCTOR CORPORATION As used herein
1 Life support devices or systems are devices or 2 A critical component is any component of a life
systems which (a) are intended for surgical implant support device or system whose failure to perform can
into the body or (b) support or sustain life and whose be reasonably expected to cause the failure of the life
failure to perform when properly used in accordance support device or system or to affect its safety or
with instructions for use provided in the labeling can effectiveness
be reasonably expected to result in a significant injury
to the user
National Semiconductor National Semiconductor National Semiconductor National Semiconductor
Corporation Europe Hong Kong Ltd Japan Ltd
1111 West Bardin Road Fax (a49) 0-180-530 85 86 13th Floor Straight Block Tel 81-043-299-2309
Arlington TX 76017 Email cnjwge tevm2 nsc com Ocean Centre 5 Canton Rd Fax 81-043-299-2408
Tel 1(800) 272-9959 Deutsch Tel (a49) 0-180-530 85 85 Tsimshatsui Kowloon
Fax 1(800) 737-7018 English Tel (a49) 0-180-532 78 32 Hong Kong
Fran ais Tel (a49) 0-180-532 93 58 Tel (852) 2737-1600
Italiano Tel (a49) 0-180-534 16 80 Fax (852) 2736-9960
National does not assume any responsibility for use of any circuitry described no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications