Lecture19.ppt
•Download as PPT, PDF•
0 likes•3 views
1. Moore's Law states that the cost/performance of silicon chips doubles every 18 months, allowing computing power to increase exponentially over time. 2. Mathematical models, simulation, and direct measurement are needed to understand and predict system performance as interactions between software and hardware become more complex. 3. Queuing theory and models of utilization can provide good estimates of congestion in systems, with congestion likely when utilization of any component exceeds 30%.
Report
Share
Report
Share
Recommended
High Performance & High Throughput Computing - EUDAT Summer School (Giuseppe ...
Giuseppe will present the differences between high-performance and high-throughput applications. High-throughput computing (HTC) refers to computations where individual tasks do not need to interact while running. It differs from High-performance (HPC) where frequent and rapid exchanges of intermediate results is required to perform the computations. HPC codes are based on tightly coupled MPI, OpenMP, GPGPU, and hybrid programs and require low latency interconnected nodes. HTC makes use of unreliable components distributing the work out to every node and collecting results at the end of all parallel tasks.
Visit: https://www.eudat.eu/eudat-summer-school
Coding the Continuum
In 2001, as early high-speed networks were deployed, George Gilder observed that “when the network is as fast as the computer's internal links, the machine disintegrates across the net into a set of special purpose appliances.” Two decades later, our networks are 1,000 times faster, our appliances are increasingly specialized, and our computer systems are indeed disintegrating. As hardware acceleration overcomes speed-of-light delays, time and space merge into a computing continuum. Familiar questions like “where should I compute,” “for what workloads should I design computers,” and "where should I place my computers” seem to allow for a myriad of new answers that are exhilarating but also daunting. Are there concepts that can help guide us as we design applications and computer systems in a world that is untethered from familiar landmarks like center, cloud, edge? I propose some ideas and report on experiments in coding the continuum.
Nbvtalkatjntuvizianagaram
This talk is given at Vizianagaram where many Engineering college faculty were attended. I have introduced developments in multi-core computers along with their architectural developments. Also, I have explained about high performance computing, where these are used. I have introduced the concept of pipelining, Amdahl's law, issues related to pipelining, MIPS architecture.
Unit i-introduction
The document provides an introduction to fundamentals of computer design. It discusses the evolution of computers from large room-sized machines to handheld devices. It outlines three main classes of computing - desktops, servers, and embedded systems - and highlights their key design considerations and performance metrics. The quantitative principles of computer design involve measuring execution time and its components, such as instruction count and clock cycles per instruction, to evaluate and compare performance.
Ds ppt imp.
This document provides an introduction to distributed systems. It discusses why distributed systems are developed, defines what a distributed system is, and provides examples. It then compares different types of distributed systems and networked operating systems. The rest of the document outlines various concepts, issues, and algorithms related to distributed systems, including advantages and disadvantages over centralized systems, software concepts, mutual exclusion, synchronization, and clock synchronization.
Ch01.pptx
This document provides an overview of computer organization and architecture. It begins by defining computer organization as encompassing physical aspects like circuits while architecture refers to logical aspects seen by programmers like instruction sets. It then discusses the evolution of computers from mechanical to modern devices, highlighting milestones. Finally, it introduces the concept of layered virtual machines that make up a computer system from the user level down to basic circuit operations.
Ch01
The document provides an overview of computer organization and architecture. It discusses the difference between computer organization, which encompasses physical aspects like circuits, and computer architecture, which involves logical aspects seen by programmers like instruction sets. The document then covers units of measurement used in computing, the evolution of computers through generations defined by their technology, the layered hierarchy of computer systems, and the von Neumann model of stored-program computers.
What’s eating python performance
Have you ever wondered how to speed up your code in Python? This presentation will show you how to start. I will begin with a guide how to locate performance bottlenecks and then give you some tips how to speed up your code. Also I would like to discuss how to avoid premature optimization as it may be ‘the root of all evil’ (at least according to D. Knuth).
Recommended
High Performance & High Throughput Computing - EUDAT Summer School (Giuseppe ...
Giuseppe will present the differences between high-performance and high-throughput applications. High-throughput computing (HTC) refers to computations where individual tasks do not need to interact while running. It differs from High-performance (HPC) where frequent and rapid exchanges of intermediate results is required to perform the computations. HPC codes are based on tightly coupled MPI, OpenMP, GPGPU, and hybrid programs and require low latency interconnected nodes. HTC makes use of unreliable components distributing the work out to every node and collecting results at the end of all parallel tasks.
Visit: https://www.eudat.eu/eudat-summer-school
Coding the Continuum
In 2001, as early high-speed networks were deployed, George Gilder observed that “when the network is as fast as the computer's internal links, the machine disintegrates across the net into a set of special purpose appliances.” Two decades later, our networks are 1,000 times faster, our appliances are increasingly specialized, and our computer systems are indeed disintegrating. As hardware acceleration overcomes speed-of-light delays, time and space merge into a computing continuum. Familiar questions like “where should I compute,” “for what workloads should I design computers,” and "where should I place my computers” seem to allow for a myriad of new answers that are exhilarating but also daunting. Are there concepts that can help guide us as we design applications and computer systems in a world that is untethered from familiar landmarks like center, cloud, edge? I propose some ideas and report on experiments in coding the continuum.
Nbvtalkatjntuvizianagaram
This talk is given at Vizianagaram where many Engineering college faculty were attended. I have introduced developments in multi-core computers along with their architectural developments. Also, I have explained about high performance computing, where these are used. I have introduced the concept of pipelining, Amdahl's law, issues related to pipelining, MIPS architecture.
Unit i-introduction
The document provides an introduction to fundamentals of computer design. It discusses the evolution of computers from large room-sized machines to handheld devices. It outlines three main classes of computing - desktops, servers, and embedded systems - and highlights their key design considerations and performance metrics. The quantitative principles of computer design involve measuring execution time and its components, such as instruction count and clock cycles per instruction, to evaluate and compare performance.
Ds ppt imp.
This document provides an introduction to distributed systems. It discusses why distributed systems are developed, defines what a distributed system is, and provides examples. It then compares different types of distributed systems and networked operating systems. The rest of the document outlines various concepts, issues, and algorithms related to distributed systems, including advantages and disadvantages over centralized systems, software concepts, mutual exclusion, synchronization, and clock synchronization.
Ch01.pptx
This document provides an overview of computer organization and architecture. It begins by defining computer organization as encompassing physical aspects like circuits while architecture refers to logical aspects seen by programmers like instruction sets. It then discusses the evolution of computers from mechanical to modern devices, highlighting milestones. Finally, it introduces the concept of layered virtual machines that make up a computer system from the user level down to basic circuit operations.
Ch01
The document provides an overview of computer organization and architecture. It discusses the difference between computer organization, which encompasses physical aspects like circuits, and computer architecture, which involves logical aspects seen by programmers like instruction sets. The document then covers units of measurement used in computing, the evolution of computers through generations defined by their technology, the layered hierarchy of computer systems, and the von Neumann model of stored-program computers.
What’s eating python performance
Have you ever wondered how to speed up your code in Python? This presentation will show you how to start. I will begin with a guide how to locate performance bottlenecks and then give you some tips how to speed up your code. Also I would like to discuss how to avoid premature optimization as it may be ‘the root of all evil’ (at least according to D. Knuth).
Computing Just What You Need: Online Data Analysis and Reduction at Extreme ...
This document discusses computing challenges posed by rapidly increasing data scales in scientific applications and high performance computing. It introduces the concept of online data analysis and reduction as an alternative to traditional offline analysis to help address these challenges. The key messages are that dramatic changes in HPC system geography due to different growth rates of technologies are driving new application structures and computational logistics problems, presenting exciting new computer science opportunities in online data analysis and reduction.
Computer architecture short note (version 8)
This document discusses computer architecture and organization. It defines computer architecture as the attributes of a computer system that are visible to programmers, such as instruction set and data type sizes, while computer organization refers to the structural relationships not visible to programmers, such as clock frequency. Performance metrics like response time and throughput are also introduced. Architectural choices aim to balance factors like cost, performance, and new technology.
Embedded Intro India05
The document discusses embedded computing systems and outlines some key points:
- Embedded systems are part of larger systems that perform specific functions in constrained, reactive environments using a combination of hardware and software.
- They have real-time requirements and challenges include high complexity, distributed networks, and meeting deadlines with increasing functionality.
- Embedded systems come in many forms, from automotive and industrial control systems to wireless sensor networks and systems within the human body.
Lecture 31.pdf
The document discusses input/output (I/O) systems and their impact on computer performance. It begins by recapping parallel processing architectures and noting that I/O performance increasingly limits overall system performance. It then describes I/O systems, including storage devices like magnetic disks. Key metrics for evaluating I/O performance like response time and throughput are introduced. The document outlines techniques for processor-I/O interface like memory mapping and interrupts. It emphasizes that the fastest computer is only as good as its slowest external component based on Amdahl's law.
Ch1Intro.pdf Computer organization and org.
This document discusses key concepts in computer organization and architecture. It begins by defining computer organization as focusing on physical components and control signals, while computer architecture refers to logical and abstract aspects seen by programmers. It then provides examples to illustrate components like processors, memory, and I/O devices. The document also covers historical developments in computing from mechanical to modern devices, the hierarchy of abstraction layers in computer systems, and concepts like cloud computing.
[EUC2016] FFWD: latency-aware event stream processing via domain-specific loa...
Tools and applications for event stream processing and real-time analytics are getting a huge hype these days on a wide range of application scenarios, from the smallest Internet of Things (IoT) embedded sensor to the most popular Social Network feed. Unfortunately, dealing with this kind of input rises some issues that can easily mine the real-time analysis requirement due to an unexpected overload of the system; this happens as the processing time may strongly depend on the single event content, while the event arrival rate may vary unpredictably over time. In this work, we propose Fast Forward With Degradation (FFWD), a latency-aware load shedding framework that exploits performance degradation techniques to adapt the throughput of the application to the size of the input, allowing the system to have a fast and reliable response time in case of overloading. Moreover, we show how different domain-specific policies can guarantee a reasonable accuracy of the aggregated output metrics.
Full paper: http://ieeexplore.ieee.org/document/7982234/
Fundamentals.pptx
This document discusses the history of computer development and trends in computer hardware over time. It provides examples of early mainframe computers from 1965 that occupied entire rooms and cost millions, compared to modern laptops from 2008 that are thousands of times more powerful yet small and inexpensive. It outlines Moore's Law and trends related to transistor counts doubling every 1-2 years and processor performance doubling every 18 months. The document also discusses shrinking chip sizes over time and the limits of chip manufacturing.
CPN302 your-linux-ami-optimization-and-performance
This document discusses optimizing Linux AMIs for performance at Netflix. It begins by providing background on Netflix and explaining why tuning the AMI is important given Netflix runs tens of thousands of instances globally with varying workloads. It then outlines some of the key tools and techniques used to bake performance optimizations into the base AMI, including kernel tuning to improve efficiency and identify ideal instance types. Specific examples of CFS scheduler, page cache, block layer, memory allocation, and network stack tuning are also covered. The document concludes by discussing future tuning plans and an appendix on profiling tools like perf and SystemTap.
week_2Lec02_CS422.pptx
The document provides an overview of parallel computing concepts including:
1) Implicit parallelism in microprocessor architectures has led to techniques like pipelining and superscalar execution to better utilize increasing transistor budgets, though dependencies limit parallelism.
2) Memory latency and bandwidth bottlenecks have shifted performance limitations to the memory system, though caches can improve effective latency through higher hit rates.
3) Communication costs, including startup time, per-hop latency, and per-word transfer time, are a major overhead in parallel programs that use techniques like message passing, packet routing, and cut-through routing to reduce communication costs.
Synch
This document provides an overview of clock synchronization in distributed systems. It discusses how physical clocks can differ slightly in frequency and how precise atomic clocks are used to define International Atomic Time (TAI) and Universal Coordinated Time (UTC). It also describes several common clock synchronization algorithms, including Cristian's algorithm, the Berkeley algorithm, and averaging algorithms. Logical clocks are introduced as an alternative to synchronized physical clocks for maintaining consistency in distributed algorithms. Lamport timestamps are presented as a way to totally order events in a distributed system.
Opal rt e phaso rsim_2013
1. ePHASORsim is a real-time phasor simulator for large power systems that can model up to 20,000 buses in real-time with a 10 millisecond time step.
2. It has applications in areas like transient stability analysis, SCADA system testing, operator training, and hardware-in-the-loop simulation.
3. A live demonstration of ePHASORsim was shown modeling the Quebec transmission system with 38 buses, 7 generators, and other common power system components.
Alex Smola, Professor in the Machine Learning Department, Carnegie Mellon Uni...
Fast, Cheap and Deep – Scaling Machine Learning: Distributed high throughput machine learning is both a challenge and a key enabling technology. Using a Parameter Server template we are able to distribute algorithms efficiently over multiple GPUs and in the cloud. This allows us to design very fast recommender systems, factorization machines, classifiers, and deep networks. This degree of scalability allows us to tackle computationally expensive problems efficiently, yielding excellent results e.g. in visual question answering.
CA UNIT I PPT.ppt
The document summarizes key concepts from the textbook "Computer Organization and Design" by David A. Patterson and John L. Hennessey. It discusses the fundamental components of computer systems, including the processor, control unit, registers, memory, and I/O. It then outlines several important principles for improving computer performance, such as designing for Moore's Law, using abstraction, optimizing common cases, exploiting parallelism through pipelining and prediction. The document also discusses metrics for measuring performance and trends in processor clock rates, power consumption, and integrated circuit technology.
Exascale Capabl
1. Building exascale computers requires moving to sub-nanometer scales and steering individual electrons to solve problems more efficiently.
2. Moving data is a major challenge, as moving data off-chip uses 200x more energy than computing with it on-chip.
3. Future computers should optimize for data movement at all levels, from system design to microarchitecture, to minimize energy usage.
Lecture1 ch01
This document provides an overview of computer organization and architecture. It discusses the difference between computer organization and architecture, with organization encompassing physical aspects and architecture focusing on the logical view seen by programmers. The document then covers basic computer components, units of measurement, the evolution of computers through generations, standards organizations, and the layered hierarchy of computer systems. It uses an example computer system advertisement to illustrate various components and specifications.
Improved implementation of a Deadline Monotonic algorithm for aperiodic traff...
- The document describes enhancements made to an existing two-tiered network architecture that schedules aperiodic traffic using a deadline monotonic algorithm. The previous architecture suffered from a "queue overload" phenomenon during high stress simulations.
- The enhanced architecture modifies the aperiodic flow generation policy for nodes to limit how often a node can generate a new flow. This is set to the maximum response time calculated during admission control.
- Simulations of the enhanced architecture show a reduction in deadline misses and improvement in the served ratio, even under high stress scenarios. This indicates the queue overload phenomenon was reduced compared to the previous architecture.
Big Data Everywhere Chicago: High Performance Computing - Contributions Towar...
The document discusses the history and future of high performance computing (HPC). It outlines the key technologies and architectures that have enabled exponential increases in computational power over recent decades. These include vector processing, parallelization, GPUs, and interconnects like Infiniband. The document also examines emerging technologies like exascale computing and quantum computing that could further push the boundaries of HPC. Overall, the document argues that HPC will remain indispensable for scientific discovery and engineering innovation into the future.
Trends in Systems and How to Get Efficient Performance
In this video from Switzerland HPC Conference, Martin Hilgeman from Dell presents: HPC Workload Efficiency and the Challenges for System Builders.
"With all the advances in massively parallel and multi-core computing with CPUs and accelerators it is often overlooked whether the computational work is being done in an efficient manner. This efficiency is largely being determined at the application level and therefore puts the responsibility of sustaining a certain performance trajectory into the hands of the user. It is observed that the adoption rate of new hardware capabilities is decreasing and lead to a feeling of diminishing returns. This presentation shows the well-known laws of parallel performance from the perspective of a system builder. It also covers through the use of real case studies, examples of how to program for energy efficient parallel application performance."
Watch the video: http://wp.me/p3RLHQ-gIS
Learn more: http://dell.com
and
http://www.hpcadvisorycouncil.com/events/2017/swiss-workshop/agenda.php
Sign up for our insideHPC Newsletter: http://insidehpc.com/newsletter
Your Linux AMI: Optimization and Performance (CPN302) | AWS re:Invent 2013
Your AMI is one of the core foundations for running applications and services effectively on Amazon EC2. In this session, you'll learn how to optimize your AMI, including how you can measure and diagnose system performance and tune parameters for improved CPU and network performance. We'll cover application-specific examples from Netflix on how optimized AMIs can lead to improved performance.
04 performance
Evaluating computers involves considering metrics like latency, throughput, bandwidth, cost, power, and reliability. Latency refers to how long a single task takes and is usually measured in seconds or clock cycles. Performance is defined as the inverse of latency, so a system with lower latency is considered higher performing. Amdahl's Law states that the overall speedup from optimizing a portion of a system is limited by the percentage of time spent in that portion. It is important for determining whether optimizations are worthwhile.
More Related Content
Similar to Lecture19.ppt
Computing Just What You Need: Online Data Analysis and Reduction at Extreme ...
This document discusses computing challenges posed by rapidly increasing data scales in scientific applications and high performance computing. It introduces the concept of online data analysis and reduction as an alternative to traditional offline analysis to help address these challenges. The key messages are that dramatic changes in HPC system geography due to different growth rates of technologies are driving new application structures and computational logistics problems, presenting exciting new computer science opportunities in online data analysis and reduction.
Computer architecture short note (version 8)
This document discusses computer architecture and organization. It defines computer architecture as the attributes of a computer system that are visible to programmers, such as instruction set and data type sizes, while computer organization refers to the structural relationships not visible to programmers, such as clock frequency. Performance metrics like response time and throughput are also introduced. Architectural choices aim to balance factors like cost, performance, and new technology.
Embedded Intro India05
The document discusses embedded computing systems and outlines some key points:
- Embedded systems are part of larger systems that perform specific functions in constrained, reactive environments using a combination of hardware and software.
- They have real-time requirements and challenges include high complexity, distributed networks, and meeting deadlines with increasing functionality.
- Embedded systems come in many forms, from automotive and industrial control systems to wireless sensor networks and systems within the human body.
Lecture 31.pdf
The document discusses input/output (I/O) systems and their impact on computer performance. It begins by recapping parallel processing architectures and noting that I/O performance increasingly limits overall system performance. It then describes I/O systems, including storage devices like magnetic disks. Key metrics for evaluating I/O performance like response time and throughput are introduced. The document outlines techniques for processor-I/O interface like memory mapping and interrupts. It emphasizes that the fastest computer is only as good as its slowest external component based on Amdahl's law.
Ch1Intro.pdf Computer organization and org.
This document discusses key concepts in computer organization and architecture. It begins by defining computer organization as focusing on physical components and control signals, while computer architecture refers to logical and abstract aspects seen by programmers. It then provides examples to illustrate components like processors, memory, and I/O devices. The document also covers historical developments in computing from mechanical to modern devices, the hierarchy of abstraction layers in computer systems, and concepts like cloud computing.
[EUC2016] FFWD: latency-aware event stream processing via domain-specific loa...
Tools and applications for event stream processing and real-time analytics are getting a huge hype these days on a wide range of application scenarios, from the smallest Internet of Things (IoT) embedded sensor to the most popular Social Network feed. Unfortunately, dealing with this kind of input rises some issues that can easily mine the real-time analysis requirement due to an unexpected overload of the system; this happens as the processing time may strongly depend on the single event content, while the event arrival rate may vary unpredictably over time. In this work, we propose Fast Forward With Degradation (FFWD), a latency-aware load shedding framework that exploits performance degradation techniques to adapt the throughput of the application to the size of the input, allowing the system to have a fast and reliable response time in case of overloading. Moreover, we show how different domain-specific policies can guarantee a reasonable accuracy of the aggregated output metrics.
Full paper: http://ieeexplore.ieee.org/document/7982234/
Fundamentals.pptx
This document discusses the history of computer development and trends in computer hardware over time. It provides examples of early mainframe computers from 1965 that occupied entire rooms and cost millions, compared to modern laptops from 2008 that are thousands of times more powerful yet small and inexpensive. It outlines Moore's Law and trends related to transistor counts doubling every 1-2 years and processor performance doubling every 18 months. The document also discusses shrinking chip sizes over time and the limits of chip manufacturing.
CPN302 your-linux-ami-optimization-and-performance
This document discusses optimizing Linux AMIs for performance at Netflix. It begins by providing background on Netflix and explaining why tuning the AMI is important given Netflix runs tens of thousands of instances globally with varying workloads. It then outlines some of the key tools and techniques used to bake performance optimizations into the base AMI, including kernel tuning to improve efficiency and identify ideal instance types. Specific examples of CFS scheduler, page cache, block layer, memory allocation, and network stack tuning are also covered. The document concludes by discussing future tuning plans and an appendix on profiling tools like perf and SystemTap.
week_2Lec02_CS422.pptx
The document provides an overview of parallel computing concepts including:
1) Implicit parallelism in microprocessor architectures has led to techniques like pipelining and superscalar execution to better utilize increasing transistor budgets, though dependencies limit parallelism.
2) Memory latency and bandwidth bottlenecks have shifted performance limitations to the memory system, though caches can improve effective latency through higher hit rates.
3) Communication costs, including startup time, per-hop latency, and per-word transfer time, are a major overhead in parallel programs that use techniques like message passing, packet routing, and cut-through routing to reduce communication costs.
Synch
This document provides an overview of clock synchronization in distributed systems. It discusses how physical clocks can differ slightly in frequency and how precise atomic clocks are used to define International Atomic Time (TAI) and Universal Coordinated Time (UTC). It also describes several common clock synchronization algorithms, including Cristian's algorithm, the Berkeley algorithm, and averaging algorithms. Logical clocks are introduced as an alternative to synchronized physical clocks for maintaining consistency in distributed algorithms. Lamport timestamps are presented as a way to totally order events in a distributed system.
Opal rt e phaso rsim_2013
1. ePHASORsim is a real-time phasor simulator for large power systems that can model up to 20,000 buses in real-time with a 10 millisecond time step.
2. It has applications in areas like transient stability analysis, SCADA system testing, operator training, and hardware-in-the-loop simulation.
3. A live demonstration of ePHASORsim was shown modeling the Quebec transmission system with 38 buses, 7 generators, and other common power system components.
Alex Smola, Professor in the Machine Learning Department, Carnegie Mellon Uni...
Fast, Cheap and Deep – Scaling Machine Learning: Distributed high throughput machine learning is both a challenge and a key enabling technology. Using a Parameter Server template we are able to distribute algorithms efficiently over multiple GPUs and in the cloud. This allows us to design very fast recommender systems, factorization machines, classifiers, and deep networks. This degree of scalability allows us to tackle computationally expensive problems efficiently, yielding excellent results e.g. in visual question answering.
CA UNIT I PPT.ppt
The document summarizes key concepts from the textbook "Computer Organization and Design" by David A. Patterson and John L. Hennessey. It discusses the fundamental components of computer systems, including the processor, control unit, registers, memory, and I/O. It then outlines several important principles for improving computer performance, such as designing for Moore's Law, using abstraction, optimizing common cases, exploiting parallelism through pipelining and prediction. The document also discusses metrics for measuring performance and trends in processor clock rates, power consumption, and integrated circuit technology.
Exascale Capabl
1. Building exascale computers requires moving to sub-nanometer scales and steering individual electrons to solve problems more efficiently.
2. Moving data is a major challenge, as moving data off-chip uses 200x more energy than computing with it on-chip.
3. Future computers should optimize for data movement at all levels, from system design to microarchitecture, to minimize energy usage.
Lecture1 ch01
This document provides an overview of computer organization and architecture. It discusses the difference between computer organization and architecture, with organization encompassing physical aspects and architecture focusing on the logical view seen by programmers. The document then covers basic computer components, units of measurement, the evolution of computers through generations, standards organizations, and the layered hierarchy of computer systems. It uses an example computer system advertisement to illustrate various components and specifications.
Improved implementation of a Deadline Monotonic algorithm for aperiodic traff...
- The document describes enhancements made to an existing two-tiered network architecture that schedules aperiodic traffic using a deadline monotonic algorithm. The previous architecture suffered from a "queue overload" phenomenon during high stress simulations.
- The enhanced architecture modifies the aperiodic flow generation policy for nodes to limit how often a node can generate a new flow. This is set to the maximum response time calculated during admission control.
- Simulations of the enhanced architecture show a reduction in deadline misses and improvement in the served ratio, even under high stress scenarios. This indicates the queue overload phenomenon was reduced compared to the previous architecture.
Big Data Everywhere Chicago: High Performance Computing - Contributions Towar...
The document discusses the history and future of high performance computing (HPC). It outlines the key technologies and architectures that have enabled exponential increases in computational power over recent decades. These include vector processing, parallelization, GPUs, and interconnects like Infiniband. The document also examines emerging technologies like exascale computing and quantum computing that could further push the boundaries of HPC. Overall, the document argues that HPC will remain indispensable for scientific discovery and engineering innovation into the future.
Trends in Systems and How to Get Efficient Performance
In this video from Switzerland HPC Conference, Martin Hilgeman from Dell presents: HPC Workload Efficiency and the Challenges for System Builders.
"With all the advances in massively parallel and multi-core computing with CPUs and accelerators it is often overlooked whether the computational work is being done in an efficient manner. This efficiency is largely being determined at the application level and therefore puts the responsibility of sustaining a certain performance trajectory into the hands of the user. It is observed that the adoption rate of new hardware capabilities is decreasing and lead to a feeling of diminishing returns. This presentation shows the well-known laws of parallel performance from the perspective of a system builder. It also covers through the use of real case studies, examples of how to program for energy efficient parallel application performance."
Watch the video: http://wp.me/p3RLHQ-gIS
Learn more: http://dell.com
and
http://www.hpcadvisorycouncil.com/events/2017/swiss-workshop/agenda.php
Sign up for our insideHPC Newsletter: http://insidehpc.com/newsletter
Your Linux AMI: Optimization and Performance (CPN302) | AWS re:Invent 2013
Your AMI is one of the core foundations for running applications and services effectively on Amazon EC2. In this session, you'll learn how to optimize your AMI, including how you can measure and diagnose system performance and tune parameters for improved CPU and network performance. We'll cover application-specific examples from Netflix on how optimized AMIs can lead to improved performance.
04 performance
Evaluating computers involves considering metrics like latency, throughput, bandwidth, cost, power, and reliability. Latency refers to how long a single task takes and is usually measured in seconds or clock cycles. Performance is defined as the inverse of latency, so a system with lower latency is considered higher performing. Amdahl's Law states that the overall speedup from optimizing a portion of a system is limited by the percentage of time spent in that portion. It is important for determining whether optimizations are worthwhile.
Similar to Lecture19.ppt (20)
Computing Just What You Need: Online Data Analysis and Reduction at Extreme ...
Computing Just What You Need: Online Data Analysis and Reduction at Extreme ...
[EUC2016] FFWD: latency-aware event stream processing via domain-specific loa...
[EUC2016] FFWD: latency-aware event stream processing via domain-specific loa...
CPN302 your-linux-ami-optimization-and-performance
CPN302 your-linux-ami-optimization-and-performance
Alex Smola, Professor in the Machine Learning Department, Carnegie Mellon Uni...
Alex Smola, Professor in the Machine Learning Department, Carnegie Mellon Uni...
Improved implementation of a Deadline Monotonic algorithm for aperiodic traff...
Improved implementation of a Deadline Monotonic algorithm for aperiodic traff...
Big Data Everywhere Chicago: High Performance Computing - Contributions Towar...
Big Data Everywhere Chicago: High Performance Computing - Contributions Towar...
Trends in Systems and How to Get Efficient Performance
Trends in Systems and How to Get Efficient Performance
Your Linux AMI: Optimization and Performance (CPN302) | AWS re:Invent 2013
Your Linux AMI: Optimization and Performance (CPN302) | AWS re:Invent 2013
Recently uploaded
Null Bangalore | Pentesters Approach to AWS IAM
#Abstract:
- Learn more about the real-world methods for auditing AWS IAM (Identity and Access Management) as a pentester. So let us proceed with a brief discussion of IAM as well as some typical misconfigurations and their potential exploits in order to reinforce the understanding of IAM security best practices.
- Gain actionable insights into AWS IAM policies and roles, using hands on approach.
#Prerequisites:
- Basic understanding of AWS services and architecture
- Familiarity with cloud security concepts
- Experience using the AWS Management Console or AWS CLI.
- For hands on lab create account on [killercoda.com](https://killercoda.com/cloudsecurity-scenario/)
# Scenario Covered:
- Basics of IAM in AWS
- Implementing IAM Policies with Least Privilege to Manage S3 Bucket
- Objective: Create an S3 bucket with least privilege IAM policy and validate access.
- Steps:
- Create S3 bucket.
- Attach least privilege policy to IAM user.
- Validate access.
- Exploiting IAM PassRole Misconfiguration
-Allows a user to pass a specific IAM role to an AWS service (ec2), typically used for service access delegation. Then exploit PassRole Misconfiguration granting unauthorized access to sensitive resources.
- Objective: Demonstrate how a PassRole misconfiguration can grant unauthorized access.
- Steps:
- Allow user to pass IAM role to EC2.
- Exploit misconfiguration for unauthorized access.
- Access sensitive resources.
- Exploiting IAM AssumeRole Misconfiguration with Overly Permissive Role
- An overly permissive IAM role configuration can lead to privilege escalation by creating a role with administrative privileges and allow a user to assume this role.
- Objective: Show how overly permissive IAM roles can lead to privilege escalation.
- Steps:
- Create role with administrative privileges.
- Allow user to assume the role.
- Perform administrative actions.
- Differentiation between PassRole vs AssumeRole
Try at [killercoda.com](https://killercoda.com/cloudsecurity-scenario/)
一比一原版(uofo毕业证书)美国俄勒冈大学毕业证如何办理
原版一模一样【微信：741003700 】【(uofo毕业证书)美国俄勒冈大学毕业证成绩单】【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理(uofo毕业证书)美国俄勒冈大学毕业证【微信：741003700 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(uofo毕业证书)美国俄勒冈大学毕业证【微信：741003700 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(uofo毕业证书)美国俄勒冈大学毕业证【微信：741003700 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(uofo毕业证书)美国俄勒冈大学毕业证【微信：741003700 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
Data Driven Maintenance | UReason Webinar
Discover the latest insights on Data Driven Maintenance with our comprehensive webinar presentation. Learn about traditional maintenance challenges, the right approach to utilizing data, and the benefits of adopting a Data Driven Maintenance strategy. Explore real-world examples, industry best practices, and innovative solutions like FMECA and the D3M model. This presentation, led by expert Jules Oudmans, is essential for asset owners looking to optimize their maintenance processes and leverage digital technologies for improved efficiency and performance. Download now to stay ahead in the evolving maintenance landscape.
AI-Based Home Security System : Home security
Home security is of paramount importance in today's world, where we rely more on technology, home
security is crucial. Using technology to make homes safer and easier to control from anywhere is
important. Home security is important for the occupant’s safety. In this paper, we came up with a low cost,
AI based model home security system. The system has a user-friendly interface, allowing users to start
model training and face detection with simple keyboard commands. Our goal is to introduce an innovative
home security system using facial recognition technology. Unlike traditional systems, this system trains
and saves images of friends and family members. The system scans this folder to recognize familiar faces
and provides real-time monitoring. If an unfamiliar face is detected, it promptly sends an email alert,
ensuring a proactive response to potential security threats.
smart pill dispenser is designed to improve medication adherence and safety f...
Smart Pill Dispenser that boosts medication adherence, empowers patients, enables remote monitoring, enhances safety, reduces healthcare costs, and contributes to data-driven healthcare improvements
AI + Data Community Tour - Build the Next Generation of Apps with the Einstei...
AI + Data Community Tour - Build the Next Generation of Apps with the Einstei...Paris Salesforce Developer Group
Build the Next Generation of Apps with the Einstein 1 Platform.
Rejoignez Philippe Ozil pour une session de workshops qui vous guidera à travers les détails de la plateforme Einstein 1, l'importance des données pour la création d'applications d'intelligence artificielle et les différents outils et technologies que Salesforce propose pour vous apporter tous les bénéfices de l'IA.Digital Twins Computer Networking Paper Presentation.pptx
A Digital Twin in computer networking is a virtual representation of a physical network, used to simulate, analyze, and optimize network performance and reliability. It leverages real-time data to enhance network management, predict issues, and improve decision-making processes.
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
This document serves as a comprehensive step-by-step guide on how to effectively use PyCharm for remote debugging of the Windows Subsystem for Linux (WSL) on a local Windows machine. It meticulously outlines several critical steps in the process, starting with the crucial task of enabling permissions, followed by the installation and configuration of WSL.
The guide then proceeds to explain how to set up the SSH service within the WSL environment, an integral part of the process. Alongside this, it also provides detailed instructions on how to modify the inbound rules of the Windows firewall to facilitate the process, ensuring that there are no connectivity issues that could potentially hinder the debugging process.
The document further emphasizes on the importance of checking the connection between the Windows and WSL environments, providing instructions on how to ensure that the connection is optimal and ready for remote debugging.
It also offers an in-depth guide on how to configure the WSL interpreter and files within the PyCharm environment. This is essential for ensuring that the debugging process is set up correctly and that the program can be run effectively within the WSL terminal.
Additionally, the document provides guidance on how to set up breakpoints for debugging, a fundamental aspect of the debugging process which allows the developer to stop the execution of their code at certain points and inspect their program at those stages.
Finally, the document concludes by providing a link to a reference blog. This blog offers additional information and guidance on configuring the remote Python interpreter in PyCharm, providing the reader with a well-rounded understanding of the process.
一比一原版(爱大毕业证书)爱荷华大学毕业证如何办理
原版一模一样【微信：741003700 】【(爱大毕业证书)爱荷华大学毕业证成绩单】【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理(爱大毕业证书)爱荷华大学毕业证【微信：741003700 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(爱大毕业证书)爱荷华大学毕业证【微信：741003700 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(爱大毕业证书)爱荷华大学毕业证【微信：741003700 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(爱大毕业证书)爱荷华大学毕业证【微信：741003700 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
Tools & Techniques for Commissioning and Maintaining PV Systems W-Animations ...
Join us for this solutions-based webinar on the tools and techniques for commissioning and maintaining PV Systems. In this session, we'll review the process of building and maintaining a solar array, starting with installation and commissioning, then reviewing operations and maintenance of the system. This course will review insulation resistance testing, I-V curve testing, earth-bond continuity, ground resistance testing, performance tests, visual inspections, ground and arc fault testing procedures, and power quality analysis.
Fluke Solar Application Specialist Will White is presenting on this engaging topic:
Will has worked in the renewable energy industry since 2005, first as an installer for a small east coast solar integrator before adding sales, design, and project management to his skillset. In 2022, Will joined Fluke as a solar application specialist, where he supports their renewable energy testing equipment like IV-curve tracers, electrical meters, and thermal imaging cameras. Experienced in wind power, solar thermal, energy storage, and all scales of PV, Will has primarily focused on residential and small commercial systems. He is passionate about implementing high-quality, code-compliant installation techniques.
LLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by Anant
Slides for the 4th Presentation on LLM Fine-Tuning with QLoRA Presented by Anant, featuring DataStax Astra
SCALING OF MOS CIRCUITS m .pptx
this ppt explains about scaling parameters of the mosfet it is basically vlsi subject
Generative AI Use cases applications solutions and implementation.pdf
Generative AI solutions encompass a range of capabilities from content creation to complex problem-solving across industries. Implementing generative AI involves identifying specific business needs, developing tailored AI models using techniques like GANs and VAEs, and integrating these models into existing workflows. Data quality and continuous model refinement are crucial for effective implementation. Businesses must also consider ethical implications and ensure transparency in AI decision-making. Generative AI's implementation aims to enhance efficiency, creativity, and innovation by leveraging autonomous generation and sophisticated learning algorithms to meet diverse business challenges.
https://www.leewayhertz.com/generative-ai-use-cases-and-applications/
Supermarket Management System Project Report.pdf
Supermarket management is a stand-alone J2EE using Eclipse Juno program.
This project contains all the necessary required information about maintaining
the supermarket billing system.
The core idea of this project to minimize the paper work and centralize the
data. Here all the communication is taken in secure manner. That is, in this
application the information will be stored in client itself. For further security the
data base is stored in the back-end oracle and so no intruders can access it.
OOPS_Lab_Manual - programs using C++ programming language
This manual contains programs on object oriented programming concepts using C++ language.
Recently uploaded (20)
5G Radio Network Througput Problem Analysis HCIA.pdf
5G Radio Network Througput Problem Analysis HCIA.pdf
2. protection of river banks and bed erosion protection works.ppt
2. protection of river banks and bed erosion protection works.ppt
smart pill dispenser is designed to improve medication adherence and safety f...
smart pill dispenser is designed to improve medication adherence and safety f...
AI + Data Community Tour - Build the Next Generation of Apps with the Einstei...
AI + Data Community Tour - Build the Next Generation of Apps with the Einstei...
Digital Twins Computer Networking Paper Presentation.pptx
Digital Twins Computer Networking Paper Presentation.pptx
SENTIMENT ANALYSIS ON PPT AND Project template_.pptx
SENTIMENT ANALYSIS ON PPT AND Project template_.pptx
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
Tools & Techniques for Commissioning and Maintaining PV Systems W-Animations ...
Tools & Techniques for Commissioning and Maintaining PV Systems W-Animations ...
LLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by Anant
LLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by Anant
Generative AI Use cases applications solutions and implementation.pdf
Generative AI Use cases applications solutions and implementation.pdf
OOPS_Lab_Manual - programs using C++ programming language
OOPS_Lab_Manual - programs using C++ programming language
Lecture19.ppt
- 1. CS 501: Software Engineering Fall 2000 Lecture 19 Performance of Computer Systems
- 3. 3 Moore's Law Original version: The density of transistors in an integrated circuit will double every year. (Gordon Moore, Intel, 1965) Current version: Cost/performance of silicon chips doubles every 18 months.
- 4. 4 Moore's Law and System Design Design system: 2000 Production use: 2003 Withdrawn from production: 2013 Processor speeds: 1 1.9 28 Memory sizes: 1 1.9 28 Disk capacity: 1 2.2 51 System cost: 1 0.4 0.01
- 5. 5 Moore's Law: Rules of Thumb Planning assumptions: Every year: cost/performance of silicon chips improves 25% cost/performance of magnetic media improves 30% 10 years = 100:1 20 years = 10,000:1
- 6. 6 Parkinson's Law Original: Work expands to fill the time available. (C. Northcote Parkinson) Planning assumptions: (a) Demand will expand to use all the hardware available. (b) Low prices will create new demands. (c) Your software will be used on equipment that you have not envisioned.
- 7. 7 False Assumptions Unix file system will never exceed 2 Gbytes (232 bytes). AppleTalk networks will never have more than 256 hosts (28 bits). GPS software will not last 1024 weeks. Nobody at Dartmouth will ever earn more than $10,000 per month. etc., etc., .....
- 8. 8 Moore's Law and the Long Term 1965 When? What level? 2000? Within your working life?
- 9. 9 Predicting System Performance • Mathematical models • Simulation • Direct measurement All require detailed understanding of the interaction between software and systems.
- 10. 10 Queues arrive wait in line service depart Single server queue
- 11. 11 Queues arrive wait in line service depart Multi-server queue
- 12. 12 Mathematical Models Queueing theory Good estimates of congestion can be made for single- server queues with: • arrivals that are independent, random events (Poisson process) • service times that follow families of distributions (e.g., negative exponential, gamma) Many of the results can be extended to multi-server queues.
- 13. 13 Utilization: Rule of Thumb utilization = mean service time mean inter-arrival time When the utilization of any system component exceeds 30%, be prepared for congestion.
- 14. 14 Behavior of Queues: Utilization mean delay utilization 1 0
- 15. 15 Simulation Model the system as set of states and events advance simulated time determine which events occurred update state and event list repeat Discrete time simulation: Time is advanced in fixed steps (e.g., 1 millisecond) Next event simulation: Time is advanced to next event Events can be simulated by random variables (e.g., arrival of next customer, completion of disk latency)
- 16. 16 Timescale Operations per second CPU instruction: 400,000,000 Disk latency: 60 read: 25,000,000 bytes Network LAN: 10,000,000 bytes dial-up modem: 6,000 bytes
- 17. 17 Measurements on Operational Systems • Benchmarks: Run system on standard problem sets, sample inputs, or a simulated load on the system. • Instrumentation: Clock specific events.
- 18. 18 Serial and Parallel Processing Single thread v. multi-thread e.g., Unix fork Granularity of locks on data e.g., record locking Network congestion e.g., back-off algorithms
- 19. 19 Example: Performance of Disk Array Each transaction must: wait for specific disk platter wait for I/O channel signal to move heads on disk platter wait for I/O channel pause for disk rotation read data Close agreement between: results from queueing theory, simulation, and direct measurement (within 15%).
- 20. 20 The Software Process Requirements Definition System and Software design Programming and Unit Testing Integration and System Testing Operation and Maintenance