The LABOTRON series provides integrated microwave reactor and transmission systems for batch and continuous flow microwave-assisted processes. Key features include SAIREM's patented INTLI technology, enhanced safety, compact size, and lower costs. The LABOTRON can efficiently process chemicals from a few grams/hour to over 1 kg/hour using its INTLI to selectively concentrate microwave energy inside reactions. It improves performance with optimized reactor geometry and external cooling to concentrate energy and control temperatures. A variety of batch and continuous flow reactors are available with quick-change connections.
The Minilabotron 2000 is a 2 kW microwave reactor system designed for laboratory use. It features a stainless steel cavity with temperature and power monitoring for safe operation. The system can be configured with batch reactors up to 3 L or continuous flow reactors. It provides uniform microwave heating and is constructed for durability and user safety.
This document describes a digital temperature adjustment system for controlling temperature in closed-chamber or open-chamber wall hung boilers. The system consists of a mother board that controls the boiler parts and connections to other boards. It also includes an ignition and control module and a remote control board. The system provides features such as temperature adjustment, flame modulation, priority for domestic hot water, and diagnostic functions.
This document provides a service manual for MCDU 11/1 and MCDU 11/2 LAE microprocessor digital temperature controllers. It describes the functions and programming of the controllers, including thermostat functions, defrost cycles, and programming parameter modes. Safety instructions are also provided, covering operating environment, symbols/decals, electrical hazards, and electro-static discharge precautions.
The SG6841 is a highly integrated PWM controller that provides several features to enhance low power flyback converters. It uses a green-mode PWM function to reduce switching frequency at light loads, lowering power consumption. It has a low start-up current of 30uA and operating current of 3mA. Protection functions include current limiting, undervoltage lockout, and overtemperature protection. The SG6841 is available in 8-pin DIP and SOP packages.
Weiber Stability Test Chambers/ are widely used for
confirmatory studies for direct comparison of drug
substance under controlled environmental conditions.
We are manufacturing Weiber BOD Incubators and Lab Ovens for varied usages in various research and R&D laboratories across India and abroad. We are committed to provide international standard Bacteriological Incubator at reasonable prices, working closely with the industry captains and leading scientists to continuously improve and enhance the quality, reliability and efficiency of our products by incorporating various inputs provided by them, from time to time. For More Information Please Logon http://goo.gl/66xIhr
K30 controller is intended for permanent installation, for
indoor use only, in an electrical panel which encloses the
rear housing, exposed terminals and wiring on the back.
DC 340 HS Compound Reco in relays - Project Sales CorpProject Sales Corp
The GT family of solid state relays can accurately control loads through an analog voltage or current control input. They feature switching at zero voltage crossing, partialization of wave train power to optimize cycle time, and 4000V isolation between input and output circuits. The relays are available in models rated for 25, 40, 50, 60, 75, and 120 amps of continuous load current with overcurrent protection. They can operate in three phase systems through master-slave control architecture. Optional accessories include panel mounting, fuses, current transformers, and load interrupt alarms.
The Minilabotron 2000 is a 2 kW microwave reactor system designed for laboratory use. It features a stainless steel cavity with temperature and power monitoring for safe operation. The system can be configured with batch reactors up to 3 L or continuous flow reactors. It provides uniform microwave heating and is constructed for durability and user safety.
This document describes a digital temperature adjustment system for controlling temperature in closed-chamber or open-chamber wall hung boilers. The system consists of a mother board that controls the boiler parts and connections to other boards. It also includes an ignition and control module and a remote control board. The system provides features such as temperature adjustment, flame modulation, priority for domestic hot water, and diagnostic functions.
This document provides a service manual for MCDU 11/1 and MCDU 11/2 LAE microprocessor digital temperature controllers. It describes the functions and programming of the controllers, including thermostat functions, defrost cycles, and programming parameter modes. Safety instructions are also provided, covering operating environment, symbols/decals, electrical hazards, and electro-static discharge precautions.
The SG6841 is a highly integrated PWM controller that provides several features to enhance low power flyback converters. It uses a green-mode PWM function to reduce switching frequency at light loads, lowering power consumption. It has a low start-up current of 30uA and operating current of 3mA. Protection functions include current limiting, undervoltage lockout, and overtemperature protection. The SG6841 is available in 8-pin DIP and SOP packages.
Weiber Stability Test Chambers/ are widely used for
confirmatory studies for direct comparison of drug
substance under controlled environmental conditions.
We are manufacturing Weiber BOD Incubators and Lab Ovens for varied usages in various research and R&D laboratories across India and abroad. We are committed to provide international standard Bacteriological Incubator at reasonable prices, working closely with the industry captains and leading scientists to continuously improve and enhance the quality, reliability and efficiency of our products by incorporating various inputs provided by them, from time to time. For More Information Please Logon http://goo.gl/66xIhr
K30 controller is intended for permanent installation, for
indoor use only, in an electrical panel which encloses the
rear housing, exposed terminals and wiring on the back.
DC 340 HS Compound Reco in relays - Project Sales CorpProject Sales Corp
The GT family of solid state relays can accurately control loads through an analog voltage or current control input. They feature switching at zero voltage crossing, partialization of wave train power to optimize cycle time, and 4000V isolation between input and output circuits. The relays are available in models rated for 25, 40, 50, 60, 75, and 120 amps of continuous load current with overcurrent protection. They can operate in three phase systems through master-slave control architecture. Optional accessories include panel mounting, fuses, current transformers, and load interrupt alarms.
The document discusses various electronic monitoring and measurement products from Transcontrol including:
- Electrical monitoring systems for underwater use on Christmas trees and manifolds measuring pressure and temperature.
- Pressure and temperature transmitters for subsea installations up to 2500m depth.
- A pressure downhole gauge for high accuracy well reservoir measurement.
- A subsea signal acquisition system for remote monitoring of sensors on underwater production units.
- Portable signal acquisition systems for testing sensors on offshore platforms.
The document describes the testo 526 differential pressure measuring instrument. It has a temperature-compensated differential pressure sensor that measures from 0 to 2000 hPa with high precision. It also has two additional probe inputs and can store measurement readings, max/min values, and leakage rate measurements over time. The testo 526 is well-suited for pressure checks in industrial processes and tightness testing of containers and pipelines.
This document describes an industrial temperature controller that uses a microcontroller and digital temperature sensor to control the temperature of a device. It displays the current, minimum, and maximum temperatures on an LCD screen and uses a relay connected to a heating element to maintain the temperature within the set limits. The controller requires components like a transformer, voltage regulator, capacitors, resistors, and transistors. It is intended to control temperature in industrial applications like manufacturing to maintain quality.
1) The document describes a photostability test chamber that exposes drug samples to controlled light and humidity conditions to test for degradation as per ICH guidelines.
2) It maintains temperature between 10-60 degrees C and humidity from 40-95% RH through an intelligent controller. Light intensity of 1.2 million lux and UV energy of 200 watt hours/m^2 can be controlled.
3) The chamber has stainless steel interior, temperature and humidity sensors, programmable settings, alarms, and provides uniform conditions for testing and comparing drug stability under illumination.
This document provides an introduction to temperature control and closed-loop control systems. It describes the basic components of a control loop including controllers, sensors, control devices and the process being controlled. It explains common sensor types like thermocouples and RTDs. It also covers controller outputs, tuning processes, alarm types and typical temperature control applications.
This document describes the specifications of a stability test chamber made by R Technologies PVT Ltd. It has double walled stainless steel construction with glass wool insulation. The chamber maintains temperature from 10-60°C and humidity from 40-95% RH. It has microprocessor controls for temperature, humidity, illumination and data logging. The chamber also has alarms, adjustable shelves and is powered by 230V AC.
The document describes a weather monitoring and control system for a greenhouse. Sensors measure parameters like temperature, humidity, light, and soil moisture. A microcontroller processes the sensor data and controls actuators like pumps, sprayers, and lights. The system aims to automatically control the greenhouse climate based on predefined thresholds to optimize plant growth and production.
We are manufacturers of bacteriological incubators in India, bacteriological incubators suppliers, laboratory incubator exporters, bacteriological incubator India. We also supply BOD incubators, carbon di oxide incubator and other laboratory incubators For More Information Please Logon http://goo.gl/iQdqZJ
PR Electronics 3000 Series High Performance Temperature Transmitters and Sign...Power Specialties, Inc.
The 3000 series gives you high accuracy, fast response time and low temperature drift – without compromise. All 6 mm devices can be mounted on a standard DIN rail or power rail with no air gap separation.
This document provides data and specifications for the 2N2222 and 2N2222A NPN switching transistors in a TO-18 metal package. It includes quick reference data on parameters like collector-base voltage, collector current, current gain, and transition frequency. Limiting values and thermal characteristics are also listed. The full document then provides typical characteristics like collector cut-off current, current gain, saturation voltages, and capacitances.
The NCP1032 is an integrated circuit that can be used to implement switching regulator applications with minimal external components. It contains all the active power control logic and protection circuitry needed, including an on-chip high voltage power switch, startup circuit, fixed frequency oscillator up to 1 MHz, and current limit, soft start, and thermal protection features. It is well-suited for applications requiring up to 3W output in isolated power supplies for telecom and medical equipment.
Rotronic HygroFlex5-EX - HF5-EX Hazardous Area Humidity & Temperature Sensors...Thorne & Derrick UK
This document describes intrinsically safe humidity and temperature transmitters for use in explosive atmospheres. The transmitters measure relative humidity and temperature with optional outputs for dew point and other calculated parameters. They have an intrinsically safe electrical construction allowing operation in areas with explosion risk without an intrinsically safe power supply. Interchangeable probes made of stainless steel can be used with a robust aluminum transmitter housing.
This document specifies an incubator for bacteriological analysis with a stainless steel interior chamber, temperature range of 35-60 degrees Celsius controlled within 1 degree accuracy, digital display, 3 shelves, glass door, and includes a thermometer for measuring the interior temperature.
HTU21D, the new humidity and temperature sensor of MEAS is about to set new standards in terms of size and intelligence: Embedded in a reflow solderable Dual Flat No leads (DFN) package of 3 x 3mm foot print and 1mm height it provides calibrated, linearized signals in digital, I2C format.
1. The document describes a 220kV series resonant system for testing cables up to 10km in length and 2500mm2 in size.
2. It includes specifications for a high voltage reactor, frequency power supply, exciter transformer, and capacitive divider used to test 220kV cables at voltages up to 216kV.
3. The system is transported on trailers and can test cables at remote locations, with operators controlling equipment from a separate safety control room.
Iskra MC 760 Network Analyzer - Datasheet Manual Angus Sankaran
The document describes two network analyzers, the MC760 and MC750. It summarizes their key properties and functions including measuring over 140 electrical quantities with high accuracy, recording measurements and alarms, communication via RS-232, RS-485 or Ethernet, and analysis of voltage quality and harmonics as per relevant standards. The devices are used to monitor electrical networks, measure parameters like voltage, current, power, and power quality issues. They include options for modules, memory cards, and software for data viewing and export.
This service manual document provides instructions for repairing a green product color television:
1) The document describes how to safely discharge the voltage on the anode cap before removing it for repair work.
2) Instructions are provided for removing and replacing the anode cap, including cleaning and ensuring the wire is not twisted during replacement.
3) The manual specifies only using designated replacement parts that maintain the safety characteristics of the original components.
The 100 Series Plug-in Smoke Detectors offer a low-profile design that is just 2 inches deep. They have a photoelectric or photoelectric/thermal sensor and compatible with various adapter bases. The detectors have a sleek design, dual LEDs for visibility, and broad range of accessories. They are designed to meet UL performance standards and have features to reduce false alarms.
This document summarizes the key specifications and features of several types of electrical distribution transformers:
- Distribution transformers are designed for 25 years of reliable performance and conform to relevant standards. They have low power loss and noise and can withstand electrical, thermal, and mechanical stresses.
- Power transformers come in voltage ratings from 11kV to 110kV and have off-circuit and on-load tap changers. They conform to standards and are designed to withstand stresses with optimized materials.
- Cast resin transformers are dry type transformers available at 11kV/433V for indoor use. They have insulation classes and vector groups and indicators with alarms and testing as per standards.
The document provides information about a practical training seminar on instrumentation and control at the NTPC Limited Badarpur Thermal Power Station in Delhi. It discusses the company profile and key details of the power station. It then describes the various instrumentation labs at the station including the manometry, pyrometry, protection and interlocks, water treatment plant, furnace safety supervision system, turbine safety supervision system, and electronics labs. For each lab, it explains the objectives and various instruments used like pressure gauges, temperature sensors, flow meters, actuators, and annunciation cards. It concludes with an overview of the automation lab and automatic control systems.
The document provides technical specifications for various power factor correction equipment including capacitors, reactors, filters, and control relays. It summarizes key ratings and features of LT and HT capacitors, power factor control relays, capacitor switching contactors, detuned harmonic filters, automatic harmonic filter panels, HT capacitors and reactors, and OSFM active filters. The equipment is designed to improve power quality and power factor in industrial electrical systems.
The document discusses various electronic monitoring and measurement products from Transcontrol including:
- Electrical monitoring systems for underwater use on Christmas trees and manifolds measuring pressure and temperature.
- Pressure and temperature transmitters for subsea installations up to 2500m depth.
- A pressure downhole gauge for high accuracy well reservoir measurement.
- A subsea signal acquisition system for remote monitoring of sensors on underwater production units.
- Portable signal acquisition systems for testing sensors on offshore platforms.
The document describes the testo 526 differential pressure measuring instrument. It has a temperature-compensated differential pressure sensor that measures from 0 to 2000 hPa with high precision. It also has two additional probe inputs and can store measurement readings, max/min values, and leakage rate measurements over time. The testo 526 is well-suited for pressure checks in industrial processes and tightness testing of containers and pipelines.
This document describes an industrial temperature controller that uses a microcontroller and digital temperature sensor to control the temperature of a device. It displays the current, minimum, and maximum temperatures on an LCD screen and uses a relay connected to a heating element to maintain the temperature within the set limits. The controller requires components like a transformer, voltage regulator, capacitors, resistors, and transistors. It is intended to control temperature in industrial applications like manufacturing to maintain quality.
1) The document describes a photostability test chamber that exposes drug samples to controlled light and humidity conditions to test for degradation as per ICH guidelines.
2) It maintains temperature between 10-60 degrees C and humidity from 40-95% RH through an intelligent controller. Light intensity of 1.2 million lux and UV energy of 200 watt hours/m^2 can be controlled.
3) The chamber has stainless steel interior, temperature and humidity sensors, programmable settings, alarms, and provides uniform conditions for testing and comparing drug stability under illumination.
This document provides an introduction to temperature control and closed-loop control systems. It describes the basic components of a control loop including controllers, sensors, control devices and the process being controlled. It explains common sensor types like thermocouples and RTDs. It also covers controller outputs, tuning processes, alarm types and typical temperature control applications.
This document describes the specifications of a stability test chamber made by R Technologies PVT Ltd. It has double walled stainless steel construction with glass wool insulation. The chamber maintains temperature from 10-60°C and humidity from 40-95% RH. It has microprocessor controls for temperature, humidity, illumination and data logging. The chamber also has alarms, adjustable shelves and is powered by 230V AC.
The document describes a weather monitoring and control system for a greenhouse. Sensors measure parameters like temperature, humidity, light, and soil moisture. A microcontroller processes the sensor data and controls actuators like pumps, sprayers, and lights. The system aims to automatically control the greenhouse climate based on predefined thresholds to optimize plant growth and production.
We are manufacturers of bacteriological incubators in India, bacteriological incubators suppliers, laboratory incubator exporters, bacteriological incubator India. We also supply BOD incubators, carbon di oxide incubator and other laboratory incubators For More Information Please Logon http://goo.gl/iQdqZJ
PR Electronics 3000 Series High Performance Temperature Transmitters and Sign...Power Specialties, Inc.
The 3000 series gives you high accuracy, fast response time and low temperature drift – without compromise. All 6 mm devices can be mounted on a standard DIN rail or power rail with no air gap separation.
This document provides data and specifications for the 2N2222 and 2N2222A NPN switching transistors in a TO-18 metal package. It includes quick reference data on parameters like collector-base voltage, collector current, current gain, and transition frequency. Limiting values and thermal characteristics are also listed. The full document then provides typical characteristics like collector cut-off current, current gain, saturation voltages, and capacitances.
The NCP1032 is an integrated circuit that can be used to implement switching regulator applications with minimal external components. It contains all the active power control logic and protection circuitry needed, including an on-chip high voltage power switch, startup circuit, fixed frequency oscillator up to 1 MHz, and current limit, soft start, and thermal protection features. It is well-suited for applications requiring up to 3W output in isolated power supplies for telecom and medical equipment.
Rotronic HygroFlex5-EX - HF5-EX Hazardous Area Humidity & Temperature Sensors...Thorne & Derrick UK
This document describes intrinsically safe humidity and temperature transmitters for use in explosive atmospheres. The transmitters measure relative humidity and temperature with optional outputs for dew point and other calculated parameters. They have an intrinsically safe electrical construction allowing operation in areas with explosion risk without an intrinsically safe power supply. Interchangeable probes made of stainless steel can be used with a robust aluminum transmitter housing.
This document specifies an incubator for bacteriological analysis with a stainless steel interior chamber, temperature range of 35-60 degrees Celsius controlled within 1 degree accuracy, digital display, 3 shelves, glass door, and includes a thermometer for measuring the interior temperature.
HTU21D, the new humidity and temperature sensor of MEAS is about to set new standards in terms of size and intelligence: Embedded in a reflow solderable Dual Flat No leads (DFN) package of 3 x 3mm foot print and 1mm height it provides calibrated, linearized signals in digital, I2C format.
1. The document describes a 220kV series resonant system for testing cables up to 10km in length and 2500mm2 in size.
2. It includes specifications for a high voltage reactor, frequency power supply, exciter transformer, and capacitive divider used to test 220kV cables at voltages up to 216kV.
3. The system is transported on trailers and can test cables at remote locations, with operators controlling equipment from a separate safety control room.
Iskra MC 760 Network Analyzer - Datasheet Manual Angus Sankaran
The document describes two network analyzers, the MC760 and MC750. It summarizes their key properties and functions including measuring over 140 electrical quantities with high accuracy, recording measurements and alarms, communication via RS-232, RS-485 or Ethernet, and analysis of voltage quality and harmonics as per relevant standards. The devices are used to monitor electrical networks, measure parameters like voltage, current, power, and power quality issues. They include options for modules, memory cards, and software for data viewing and export.
This service manual document provides instructions for repairing a green product color television:
1) The document describes how to safely discharge the voltage on the anode cap before removing it for repair work.
2) Instructions are provided for removing and replacing the anode cap, including cleaning and ensuring the wire is not twisted during replacement.
3) The manual specifies only using designated replacement parts that maintain the safety characteristics of the original components.
The 100 Series Plug-in Smoke Detectors offer a low-profile design that is just 2 inches deep. They have a photoelectric or photoelectric/thermal sensor and compatible with various adapter bases. The detectors have a sleek design, dual LEDs for visibility, and broad range of accessories. They are designed to meet UL performance standards and have features to reduce false alarms.
This document summarizes the key specifications and features of several types of electrical distribution transformers:
- Distribution transformers are designed for 25 years of reliable performance and conform to relevant standards. They have low power loss and noise and can withstand electrical, thermal, and mechanical stresses.
- Power transformers come in voltage ratings from 11kV to 110kV and have off-circuit and on-load tap changers. They conform to standards and are designed to withstand stresses with optimized materials.
- Cast resin transformers are dry type transformers available at 11kV/433V for indoor use. They have insulation classes and vector groups and indicators with alarms and testing as per standards.
The document provides information about a practical training seminar on instrumentation and control at the NTPC Limited Badarpur Thermal Power Station in Delhi. It discusses the company profile and key details of the power station. It then describes the various instrumentation labs at the station including the manometry, pyrometry, protection and interlocks, water treatment plant, furnace safety supervision system, turbine safety supervision system, and electronics labs. For each lab, it explains the objectives and various instruments used like pressure gauges, temperature sensors, flow meters, actuators, and annunciation cards. It concludes with an overview of the automation lab and automatic control systems.
The document provides technical specifications for various power factor correction equipment including capacitors, reactors, filters, and control relays. It summarizes key ratings and features of LT and HT capacitors, power factor control relays, capacitor switching contactors, detuned harmonic filters, automatic harmonic filter panels, HT capacitors and reactors, and OSFM active filters. The equipment is designed to improve power quality and power factor in industrial electrical systems.
Far series outdoor auto circuit recloserAUTO RECLOSER
The document provides information on the FAR series pole mounted auto circuit recloser from Zhejiang Farady Electric Co., Ltd. Key details include:
- It uses epoxy resin solid insulation and a long life magnetic actuator, and integrates functions of control, protection, measurement, communication, fault detection and online monitoring.
- It is suitable for overhead distribution lines and substations from 11kV to 38kV. Rated currents range from 200A to 1600A and breaking capacities are from 12.5kA to 31.5kA.
- It has optional communication protocols, measurement functions, reclosing intervals and event recording capabilities.
The document describes a pole mounted auto circuit recloser manufactured by Zhejiang Farady Electric Co., Ltd. The FAR series recloser can be used on overhead distribution lines and substations from 11kV to 38kV. It integrates control, protection, measurement, communication, fault detection and online monitoring functions. Key features include epoxy resin solid insulation, a magnetic actuator, and recloser functions. It is designed to perform reliably for over 20 years in various environmental conditions.
S&A CWFL-800 fiber water chillers with dual circulating refrigeration system and dual temperature control system, has 3000W cooling capacity, specially designed for cooling 800W fiber lasers.
S&A CWFL-500 dual temperature water chillers are specially designed for cooling 500W fiber lasers, has so multi-functional that the laser device and the QBH connector/optics can be cooled by the low temperature control system and the high temperature control system respectively at the same time, which can greatly reduce the generation of the condensed water and save cost & space.
Katalog fluke-oscilloscope-the-toughest-scopes-ever-built-by-tridinamika,
jual fluke oscilloscope, harga, beli, info, spesifikasi dan review
untuk informasi lebih lanjut kunjungi
www.tridinamika.com
untuk pemesanan dan pertanyaan hubungi via email
sales@tridinamika.com
Track 1 session 8 - st dev con 2016 - smart factoriesST_World
The document provides an overview of ST's technologies for enabling smarter, safer, and more efficient factories and workplaces. It discusses how ST products like motor drivers, gate drivers, power modules, DC-DC converters, microcontrollers, and sensors can enable factory automation solutions with more connectivity, intelligence, awareness, and efficiency. Specific product lines highlighted include STM32 and SLLIMM microcontrollers, motor drivers, 650V and 1200V IGBTs, SiC MOSFETs and diodes, isolated gate drivers, intelligent power modules, and MEMS sensors.
S&A CWFL-1000 dual temperature water chillers with 4200W cooling capacity, specially designed for cooling 1000W fiber lasers, are characterized by dual circulating refrigeration system and dual temperature control system.
Infra systems manufactures various automation sensors and products for home, building, and industrial automation. This includes digital counters, timers, safety guards, anti-crane collision switches, and other devices. The company's products are used to automate processes, improve safety, and save on electricity and water costs when used in buildings and facilities.
Infra systems manufactures various automation sensors and products for home, building, and industrial automation. This includes digital counters, timers, safety guards, anti-crane collision switches, and other devices. The company's products are used to automate processes, improve safety, and save on electricity and water costs when used in homes and buildings. Infra systems also makes safety guards that use infrared beams to detect objects in dangerous machine areas.
Product Catalogue of InPhase Solar Inverter from the Utility and Industrial range with offerings from 80 Kw to 1 MW. The inverters comply to all existing standards and are made for India
This document discusses power factor correction and reactive power compensation. It provides an overview of a low voltage switchgear and controlgear assembly that can be customized for power factor correction applications. It then discusses features of automatic capacitor banks for power factor correction, including their main components like power factor controllers and capacitor elements. Specifications for the reactive power compensation equipment are also included, along with a selection guide and typical applications where power factor correction can provide benefits like reducing power factor penalties from utilities.
1) The document discusses RLW type medium-voltage pole mounted vacuum load break switches, including specifications, operating conditions, advantages, optional configurations, and dimensional drawings.
2) Key features of the switches include stainless steel tanks, IP65 protection, vacuum interrupters embedded in epoxy resin poles, and creepage distances meeting various voltage standards.
3) Optional configurations include different interrupting poles, disconnectors, protection devices, junction boxes, and controllers to provide customized solutions depending on the application.
Công ty TNHH Hạo Phương là đối tác phân phối các thiết bị điện công nghiệp của hãng Fuji Electric (Nhật Bản): MCCB, MCB, Contactor, Servo Motor, biến tần, màn hình cảm ứng, PLC...
Catalog Biến tần Frenic Aqua Fuji-Beeteco.comBeeteco
The document discusses Fuji Electric's FRENIC-AQUA series of inverters. It provides high-performance control of pumps and blowers for water and wastewater applications through energy saving functions and dedicated control features. These inverters contribute to cost reduction by optimizing processes and cutting power consumption for water treatment facilities. The inverters have a slim body design and user-friendly interface to allow independent installation and easy operation and maintenance.
S&A CWFL-1500 dual temperature industrial water chillers specially designed for cooling 1500W fiber lasers has multiple alarm functions: compressor time-delay protection, compressor overcurrent protection, water flow alarm and over high / low temperature alarm.
www.envimart.vn - ĐT: 028 77727979 - sales@envimart.vn - Nền tảng cung cấp thiết bị, vật tư ngành nước và môi trường. Chuyên cung cấp vật tư cho dự án xử lý nước sạch, nước thải và môi trường. Envimart luôn đồng hành, tin cậy với đối tác nhà thầu, nhà tích hợp và người sử dụng.
The document discusses Rockwill Electric's RCW series of automatic circuit reclosers for overhead distribution lines and substations. The RCW reclosers are available for voltages up to 38kV and currents up to 1250A. They integrate control, protection, measurement, communication and fault detection functions. The reclosers offer various options for ratings, installation styles, relay protection curves, communication protocols, and reclosing settings. They are designed for harsh environments from -45°C to 85°C and feature vacuum interrupters, magnetic actuators, and IP65 protection class. Rockwill provides technical support and services for the reclosers.
The S2000micro is an intelligent RTU with optional integrated pump controller functionality. It has a small footprint but powerful processing and flexible I/O. Key features include native DNP3 and WITS compliance, an embedded web server, Ethernet and alternative communications ports. It offers cost-effective monitoring and control for a wide range of applications. When used with the Pump Controller application, it can control up to two pumps and provide standard pump station functionality.
Alt. GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using ...James Anderson
Effective Application Security in Software Delivery lifecycle using Deployment Firewall and DBOM
The modern software delivery process (or the CI/CD process) includes many tools, distributed teams, open-source code, and cloud platforms. Constant focus on speed to release software to market, along with the traditional slow and manual security checks has caused gaps in continuous security as an important piece in the software supply chain. Today organizations feel more susceptible to external and internal cyber threats due to the vast attack surface in their applications supply chain and the lack of end-to-end governance and risk management.
The software team must secure its software delivery process to avoid vulnerability and security breaches. This needs to be achieved with existing tool chains and without extensive rework of the delivery processes. This talk will present strategies and techniques for providing visibility into the true risk of the existing vulnerabilities, preventing the introduction of security issues in the software, resolving vulnerabilities in production environments quickly, and capturing the deployment bill of materials (DBOM).
Speakers:
Bob Boule
Robert Boule is a technology enthusiast with PASSION for technology and making things work along with a knack for helping others understand how things work. He comes with around 20 years of solution engineering experience in application security, software continuous delivery, and SaaS platforms. He is known for his dynamic presentations in CI/CD and application security integrated in software delivery lifecycle.
Gopinath Rebala
Gopinath Rebala is the CTO of OpsMx, where he has overall responsibility for the machine learning and data processing architectures for Secure Software Delivery. Gopi also has a strong connection with our customers, leading design and architecture for strategic implementations. Gopi is a frequent speaker and well-known leader in continuous delivery and integrating security into software delivery.
Pushing the limits of ePRTC: 100ns holdover for 100 daysAdtran
At WSTS 2024, Alon Stern explored the topic of parametric holdover and explained how recent research findings can be implemented in real-world PNT networks to achieve 100 nanoseconds of accuracy for up to 100 days.
How to Get CNIC Information System with Paksim Ga.pptxdanishmna97
Pakdata Cf is a groundbreaking system designed to streamline and facilitate access to CNIC information. This innovative platform leverages advanced technology to provide users with efficient and secure access to their CNIC details.
Removing Uninteresting Bytes in Software FuzzingAftab Hussain
Imagine a world where software fuzzing, the process of mutating bytes in test seeds to uncover hidden and erroneous program behaviors, becomes faster and more effective. A lot depends on the initial seeds, which can significantly dictate the trajectory of a fuzzing campaign, particularly in terms of how long it takes to uncover interesting behaviour in your code. We introduce DIAR, a technique designed to speedup fuzzing campaigns by pinpointing and eliminating those uninteresting bytes in the seeds. Picture this: instead of wasting valuable resources on meaningless mutations in large, bloated seeds, DIAR removes the unnecessary bytes, streamlining the entire process.
In this work, we equipped AFL, a popular fuzzer, with DIAR and examined two critical Linux libraries -- Libxml's xmllint, a tool for parsing xml documents, and Binutil's readelf, an essential debugging and security analysis command-line tool used to display detailed information about ELF (Executable and Linkable Format). Our preliminary results show that AFL+DIAR does not only discover new paths more quickly but also achieves higher coverage overall. This work thus showcases how starting with lean and optimized seeds can lead to faster, more comprehensive fuzzing campaigns -- and DIAR helps you find such seeds.
- These are slides of the talk given at IEEE International Conference on Software Testing Verification and Validation Workshop, ICSTW 2022.
Climate Impact of Software Testing at Nordic Testing DaysKari Kakkonen
My slides at Nordic Testing Days 6.6.2024
Climate impact / sustainability of software testing discussed on the talk. ICT and testing must carry their part of global responsibility to help with the climat warming. We can minimize the carbon footprint but we can also have a carbon handprint, a positive impact on the climate. Quality characteristics can be added with sustainability, and then measured continuously. Test environments can be used less, and in smaller scale and on demand. Test techniques can be used in optimizing or minimizing number of tests. Test automation can be used to speed up testing.
Introducing Milvus Lite: Easy-to-Install, Easy-to-Use vector database for you...Zilliz
Join us to introduce Milvus Lite, a vector database that can run on notebooks and laptops, share the same API with Milvus, and integrate with every popular GenAI framework. This webinar is perfect for developers seeking easy-to-use, well-integrated vector databases for their GenAI apps.
In the rapidly evolving landscape of technologies, XML continues to play a vital role in structuring, storing, and transporting data across diverse systems. The recent advancements in artificial intelligence (AI) present new methodologies for enhancing XML development workflows, introducing efficiency, automation, and intelligent capabilities. This presentation will outline the scope and perspective of utilizing AI in XML development. The potential benefits and the possible pitfalls will be highlighted, providing a balanced view of the subject.
We will explore the capabilities of AI in understanding XML markup languages and autonomously creating structured XML content. Additionally, we will examine the capacity of AI to enrich plain text with appropriate XML markup. Practical examples and methodological guidelines will be provided to elucidate how AI can be effectively prompted to interpret and generate accurate XML markup.
Further emphasis will be placed on the role of AI in developing XSLT, or schemas such as XSD and Schematron. We will address the techniques and strategies adopted to create prompts for generating code, explaining code, or refactoring the code, and the results achieved.
The discussion will extend to how AI can be used to transform XML content. In particular, the focus will be on the use of AI XPath extension functions in XSLT, Schematron, Schematron Quick Fixes, or for XML content refactoring.
The presentation aims to deliver a comprehensive overview of AI usage in XML development, providing attendees with the necessary knowledge to make informed decisions. Whether you’re at the early stages of adopting AI or considering integrating it in advanced XML development, this presentation will cover all levels of expertise.
By highlighting the potential advantages and challenges of integrating AI with XML development tools and languages, the presentation seeks to inspire thoughtful conversation around the future of XML development. We’ll not only delve into the technical aspects of AI-powered XML development but also discuss practical implications and possible future directions.
Full-RAG: A modern architecture for hyper-personalizationZilliz
Mike Del Balso, CEO & Co-Founder at Tecton, presents "Full RAG," a novel approach to AI recommendation systems, aiming to push beyond the limitations of traditional models through a deep integration of contextual insights and real-time data, leveraging the Retrieval-Augmented Generation architecture. This talk will outline Full RAG's potential to significantly enhance personalization, address engineering challenges such as data management and model training, and introduce data enrichment with reranking as a key solution. Attendees will gain crucial insights into the importance of hyperpersonalization in AI, the capabilities of Full RAG for advanced personalization, and strategies for managing complex data integrations for deploying cutting-edge AI solutions.
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!SOFTTECHHUB
As the digital landscape continually evolves, operating systems play a critical role in shaping user experiences and productivity. The launch of Nitrux Linux 3.5.0 marks a significant milestone, offering a robust alternative to traditional systems such as Windows 11. This article delves into the essence of Nitrux Linux 3.5.0, exploring its unique features, advantages, and how it stands as a compelling choice for both casual users and tech enthusiasts.
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...SOFTTECHHUB
The choice of an operating system plays a pivotal role in shaping our computing experience. For decades, Microsoft's Windows has dominated the market, offering a familiar and widely adopted platform for personal and professional use. However, as technological advancements continue to push the boundaries of innovation, alternative operating systems have emerged, challenging the status quo and offering users a fresh perspective on computing.
One such alternative that has garnered significant attention and acclaim is Nitrux Linux 3.5.0, a sleek, powerful, and user-friendly Linux distribution that promises to redefine the way we interact with our devices. With its focus on performance, security, and customization, Nitrux Linux presents a compelling case for those seeking to break free from the constraints of proprietary software and embrace the freedom and flexibility of open-source computing.
Threats to mobile devices are more prevalent and increasing in scope and complexity. Users of mobile devices desire to take full advantage of the features
available on those devices, but many of the features provide convenience and capability but sacrifice security. This best practices guide outlines steps the users can take to better protect personal devices and information.
Sudheer Mechineni, Head of Application Frameworks, Standard Chartered Bank
Discover how Standard Chartered Bank harnessed the power of Neo4j to transform complex data access challenges into a dynamic, scalable graph database solution. This keynote will cover their journey from initial adoption to deploying a fully automated, enterprise-grade causal cluster, highlighting key strategies for modelling organisational changes and ensuring robust disaster recovery. Learn how these innovations have not only enhanced Standard Chartered Bank’s data infrastructure but also positioned them as pioneers in the banking sector’s adoption of graph technology.
Large Language Model (LLM) and it’s Geospatial Applications
Labotron X
1. LABOTRON EXTRACTION & SYNTHESIS 2450 MHz
LABOTRON EXTRACTION & SYNTHESIS 2450 MHz
The LABOTRON series is the generic name for a ground breaking range of integrated reactor and
microwave transmission systems especially designed to carry out microwave-assisted processes in
batch or in continuous flow. The LABOTRON implements SAIREM’s patented INTLI (internal
transmission line) technology together with the U-waveguide, WO 2009/122101 and WO
2009/122102.
Fig. 1. LABOTRON 6 kW with batch reactor Fig. 2. LABOTRON 2 kW with CF reactor
The LABOTRON provides enhanced safety, assured process compatibility, minimum footprint and
reduced cost of ownership compared to the more conventional approach of microwave-assisted
systems. A centralized control strategy allows for energy conservation. Other benefits include lower
installation costs and shorter installation time.
The principle of the microwave-assisted processing using INTLI is to bring, very selectively, a great
quantity of energy directly inside the reaction mixture. The LABOTRON can cover a wide area of
chemical processes enabling efficient and reproducible syntheses from a few grams/hour to more
than 1 kg/hour. The INTLI technology brings new prospects to the microwave chemistry and in
particular, to the possibility of scaling-up processes in continuous flow.
The LABOTRON improves considerably the performance of microwave-assisted chemistry due to:
Optimized geometry of the INTLI to achieve high power densities inside the reactor, up to
several kW/L;
Microwave energy can be selectively concentrated inside the reaction by using a solvent
relatively transparent to microwaves;
The external cooling via a metallic jacket can maintain the reagents and their products at very
low temperatures to avoid the degradation of the delicate molecules;
12 porte du Grand Lyon, 01702 Neyron Cedex, France, Web : www.sairem.com
: +33 472 018 160, : +33 472 018 179 E-mail : commercial@sairem.com
2. Continuous flow or batch mode process;
Direct reading of forward and reflected power values to enable the correct calculation of the
energy absorbed by the irradiated sample.
Other advantages are:
Automatic impedance tuning for minimal levels of reflected power and maximum efficiency
of the microwave-assisted process;
Quick-connections for increased flexibility and rapid cleaning & maintenance;
Possibility of quick-adapting several types of reactors – standard or custom made - on the
same microwave head;
Possibility of scaling-up at 915 MHz if the required microwave power is higher than 6 kW;
Batch reactor: efficient mechanical stirring with adjustable speed;
PLC-based controller and touch screen user interface; all system functions and status,
including recipe changes, alarms and chemical levels are accessible from the touch screen
display;
On-line reagents addition and products removal & sampling;
Based on a mobile platform for quick installation and positioning.
OPTIONS
The LABOTRON is supplied with a choice of two microwave generators, i.e. 6 kW (Fig. 1) and 2
kW (Fig. 2) and a choice of microwave-assisted reactors, which include batch reactors and
continuous flow reactors. The exact choice of technology is driven by the process type, the process
recipe and customer requirements pertaining to utility availability, cost of ownership and chemical
performance.
1. LABOTRON X – system designed to carry out microwave-assisted extraction from laboratory
scale up to industrial scale;
2. LABOTRON S – system designed to perform microwave-assisted synthesis from laboratory
scale up to industrial scale.
Two types of reactors are available with the LABOTRON:
- Batch reactor with volumes from 1.7 L up to 17 L (Fig. 3a) within which the INTLI is placed
in the middle of the reactor in direct contact with the reaction mixture. The reactor is made
out of high quality stainless steel and features an external cooling jacket and internal stirring
system by mechanical stirrer. The reactor & INTLI can be fully lined with PTFE or Hastelloy
to ensure that any solvents and acids can be safely employed. Other features of the batch
reactor include: ¼ inch Swagelock fitting and mass flow meter for gas (nitrogen, air etc.)
usage, connection for a condensation/distillation column, up to 4 thermometers (optical fibre
or thermocouple), port for reagent addition as the reaction proceeds (without the need of
turning the microwaves off), for on-line sampling etc. The cooling of the reactor can be
controlled and programmed as such that cooling will be ON only if necessary; the control of
this function is driven by the reaction temperature;
- Continuous flow (CF) reactor features SAIREM’s innovative SPIN reactor (Fig. 3b) proven to
improve yield, selectivity and safety of liquid-liquid and liquid-vapour reactions. Temperature
measurement and control is available via a thermocouple installed at the exit of the reactor.
The LABOTRON has a very degree of versatility: all reactors are easily interchangeable and the
connections are made via standard quick-release connectors. The same system can be easily
configured to perform numerous applications including solvent extraction, chemical synthesis,
hydrolysis etc. at laboratory scale and industrial scale.
12 porte du Grand Lyon, 01702 Neyron Cedex, France, Web : www.sairem.com
: +33 4 72 01 81 60, : +33 4 72 01 81 79 E-mail : commercial@sairem.com
3. The LABOTRON contains built-in software safeguards (Reactor Active Recognition Control) that
disallow programming to unsafe combination of power and reactor type. The proprietary software is
easy to use, self intuitive with control style which can be selected for any method or reactor from
ramp to temperature and ramp to microwave power, set-point control, multiple ramps, time, recipe
choice & storage etc.
The LABOTRON has numerous standard safety features and interlocks that automatically monitor
and control the operation to ensure safe and reliable functionality at all times: continuous microwave
power control, pressure and temperature sensors, load sensing, microwave leak detection.
1.7 L 1.7 L section view 17 L
Fig. 3a. Batch reactors mounted on the U-shaped waveguide
SPIN S SPIN M SPIN M – section view
Fig. 3b. Helix (continuous flow) reactors mounted on the U-shaped waveguide
12 porte du Grand Lyon, 01702 Neyron Cedex, France, Web : www.sairem.com
: +33 4 72 01 81 60, : +33 4 72 01 81 79 E-mail : commercial@sairem.com
4. MAIN TECHNICAL PARAMETERS
REF. LABOTRON X or LABOTRON S
Microwave frequency 2450 MHz
2 kW continuous wave (CW) or pulsed, adjustable from 0
W to 2000 W
Maximum microwave power
6 kW continuous wave (CW) or pulsed, adjustable from
600 W to 6000 W
Microwave tuning Auto-tuner
- Forward power, reflected power and temperature via
integral PLC/digital display
Control - Touch screen: coloured 12 inch display, protected again
chemical splashes
- Data registration: data logging ports RJ45 and USB
- Reactor Active Recognition Control
- Pressure release valve at 1.5 bar
- Inside cabinet pressure switch
- Isolator for magnetron protection from reflected energy
and to assure constant power output
Safety - Retractable drip tray to contain any accidental fluid
leaks, splashes etc.
- Anti-splash display protection
- Cabinet painted in anticorrosive paint
- Visible (red, yellow, green) signal tower and sounder
- Hardwired microwave leak detector
Temperature measurement & - Optical fibre (from -80 up to 250 0C)
control - Thermocouple type K, Inconel, up to 950 0C
- Volume from 1.7 L to 17 L; to be specified with order;
- Material of construction: stainless steel*
Batch - Cooling: water
- Working pressure: max. 1.5 bar
Reactors - Stirring: mechanical stirrer with adjustable speed
- Volume from 40 ml to 110 ml
-
Material of construction: borosilicate glass (Pyrex)**
SPIN CF
- Integral pump with adjustable flow
- Cooling: silicone oil (oil bath not supplied)
INTLI Aluminium or anticorrosion protected aluminium
2 kW system: 1-phase 240 V 50/60 Hz
Power requirements – supply
6 kW system: 3-phase 400 V, 208 V, 50/60 Hz
Water, min. 4 L/min, with integrated electrovalve for
Microwave generator cooling
control. Twater = 18 – 25 0C, Tambient = max. 40 0C
Dimensions (H x L x W) mm 2 kW system: 1560 x 661 x 1100 (with U-waveguide and
Each side panel requires 650 reactor mounted)
mm when fully opened 6 kW system: 1600 x 900 x 1100 (with U-waveguide and
reactor mounted)
*
Other metals could be also ordered, e.g. hastelloy. Inconel etc.
**
Fused silica (Quartz) on request
12 porte du Grand Lyon, 01702 Neyron Cedex, France, Web : www.sairem.com
: +33 4 72 01 81 60, : +33 4 72 01 81 79 E-mail : commercial@sairem.com
5. 12 porte du Grand Lyon, 01702 Neyron Cedex, France, Web : www.sairem.com
: +33 4 72 01 81 60, : +33 4 72 01 81 79 E-mail : commercial@sairem.com
6. 12 porte du Grand Lyon, 01702 Neyron Cedex, France, Web : www.sairem.com
: +33 4 72 01 81 60, : +33 4 72 01 81 79 E-mail : commercial@sairem.com