This document describes intrinsically safe humidity and temperature transmitters for use in explosive atmospheres. The transmitters measure relative humidity and temperature with optional outputs for dew point and other calculated parameters. They have an intrinsically safe electrical construction allowing operation in areas with explosion risk without an intrinsically safe power supply. Interchangeable probes made of stainless steel can be used with a robust aluminum transmitter housing.
Marechal SPeX Single Pole Power Connector
Zone 1 & Zone 2 Zone 21, Zone 22
680 Amp IP65/IP66 Water & Dust-tight
Marechal Hazardous Area Plugs & Sockets
1000V a.c. / 1500V d.c. single pole, 6800A ‘e' increased safety Marechal SPeX plug and socket power connector enables the user to connect and disconnect heavy duty equipment simply and safely in hazardous area zones 1, 2, 21 and 22.
Designed for use in hazardous areas the Marechal SPeX plug and socket assembly is ATEX 94/9/CE approved for zones 1 & 2 (gas) and zones 21 & 22 (dust). Marechal SPeX offers automatic IP66/IP67 ingress protection rating as soon as the plug is inserted into the socket. Electromechanical interlocking is provided via a microswitch (which opens and closes all phases simultaneously) to protect the user and to prevent electrical destabilisation of equipment.
The Marechal casing is manufactured in glassfibre-reinforced polyester which affords excellent mechanical protection (IK08) and resistance to UV and chemical agents. Typical applications include mobile gensets, ship-to-shore supplies, mines, offshore platforms etc.
The incorrect mating of phases is mechanically impossible. Furthermore colour-coding enables a visual check.
Marechal SPeX Single Pole Power Connector
Marechal SPeX - EX ATEX Hazardous Area Plug, Socket Power Connector
Enhanced protection mode « e »
Compliant with ATEX 94/9/CE Directive
Zones 1 and 2 (gas) and zones 21 and 22 (dust)
Up to 680 A
Up to 1000 V a.c.
Interlock switch system via pilot contacts, synchronized connection and disconnection for all phasesMechanical keying system with 5 positions to discriminate between phases
Visual identification of phases with standard colour codes
Automatically IP65 dust and watertight
IK08 shock resistant GRP casings
Resistant to temperature changes: -40 °C to +60 °C
GIC India is Electronics company in Pune and manufacturer of business Controls, Industrial Controllers and temporal arrangement devices since 1972. it's manufacturer and provider of method management devices, temperature controllers, voltage observance, level observance devices, signal transducers, power provides, timers, programmable logic controllers.
The Marechal DXN Plug and Socket Outlets (decontactors) comply with ATEX Hazardous Area Certification for use in Explosive Atmospheres including Zones 1 and 2 (gas) and Zones 21 and 22 (dust).
Marechal DXN ATEX certified hazardous area plugs and sockets are rated from 20-63amps, IP66/67 watertight ingress protection and with socket-outlet safety shutter providing IP4X protection. The Marechal DXN plugs and sockets also comply with EN 50018 (explosion proof safety "d") EN 50019 (increased safety "e"), EN 50281-1-1 (electrical equipment for use in flammable dust atmospheres) and IEC 60309-1 (plugs and socket-outlets for industrial purposes) standards.
Marechal SPeX Single Pole Power Connector
Zone 1 & Zone 2 Zone 21, Zone 22
680 Amp IP65/IP66 Water & Dust-tight
Marechal Hazardous Area Plugs & Sockets
1000V a.c. / 1500V d.c. single pole, 6800A ‘e' increased safety Marechal SPeX plug and socket power connector enables the user to connect and disconnect heavy duty equipment simply and safely in hazardous area zones 1, 2, 21 and 22.
Designed for use in hazardous areas the Marechal SPeX plug and socket assembly is ATEX 94/9/CE approved for zones 1 & 2 (gas) and zones 21 & 22 (dust). Marechal SPeX offers automatic IP66/IP67 ingress protection rating as soon as the plug is inserted into the socket. Electromechanical interlocking is provided via a microswitch (which opens and closes all phases simultaneously) to protect the user and to prevent electrical destabilisation of equipment.
The Marechal casing is manufactured in glassfibre-reinforced polyester which affords excellent mechanical protection (IK08) and resistance to UV and chemical agents. Typical applications include mobile gensets, ship-to-shore supplies, mines, offshore platforms etc.
The incorrect mating of phases is mechanically impossible. Furthermore colour-coding enables a visual check.
Marechal SPeX Single Pole Power Connector
Marechal SPeX - EX ATEX Hazardous Area Plug, Socket Power Connector
Enhanced protection mode « e »
Compliant with ATEX 94/9/CE Directive
Zones 1 and 2 (gas) and zones 21 and 22 (dust)
Up to 680 A
Up to 1000 V a.c.
Interlock switch system via pilot contacts, synchronized connection and disconnection for all phasesMechanical keying system with 5 positions to discriminate between phases
Visual identification of phases with standard colour codes
Automatically IP65 dust and watertight
IK08 shock resistant GRP casings
Resistant to temperature changes: -40 °C to +60 °C
GIC India is Electronics company in Pune and manufacturer of business Controls, Industrial Controllers and temporal arrangement devices since 1972. it's manufacturer and provider of method management devices, temperature controllers, voltage observance, level observance devices, signal transducers, power provides, timers, programmable logic controllers.
The Marechal DXN Plug and Socket Outlets (decontactors) comply with ATEX Hazardous Area Certification for use in Explosive Atmospheres including Zones 1 and 2 (gas) and Zones 21 and 22 (dust).
Marechal DXN ATEX certified hazardous area plugs and sockets are rated from 20-63amps, IP66/67 watertight ingress protection and with socket-outlet safety shutter providing IP4X protection. The Marechal DXN plugs and sockets also comply with EN 50018 (explosion proof safety "d") EN 50019 (increased safety "e"), EN 50281-1-1 (electrical equipment for use in flammable dust atmospheres) and IEC 60309-1 (plugs and socket-outlets for industrial purposes) standards.
Hadar Hazardous Area (ATEX) Lighting ranges are suitable for explosive atmosphere environments and are certified to Zone 1, Ex e, Ex d and Zone 2 Ex n hazardous areas – fluorescent, recessed, portable, bulkhead, wellglass, floodlight and LED hazardous area lighting ranges.
The Hadar hazardous area lighting ranges comprises one of the most up to date and innovative lighting portfolios - suitable for explosive atmospheres the range of Hadar hazardous area lighting is certified to Zone 1 & 21, Ex e, Ex d, and Zone 2 & 22 Ex n.
The Hadar Lighting Ex e products feature the “End of Life” (EoL) protection circuit ballast according to DIN EN 61347-2-3 and IEC 60079-7 Ed.4.
Hadar Hazardous Area Lighting is a specialist manufacturer of hazardous area lighting for the oil, gas, petro-chemical, pharmaceutical, offshore and marine industries worldwide offering the design and production of lighting products for Zone 1, 2, 21 & 22, Gas and Dust - this includes ATEX and IEC Ex Explosion Proof Exe & Ex d Lighting ranges : fluorescent, recessed, helideck, LED floodlight, bulkhead and well glass.
The Abtech SSD Ex d Range of stainless steel enclosures are manufactured from either stainless steel 316 or mild steel and provide significant levels of environmental protection. The Abtech SSD Ex d flameproof range uses the same flexible design approach seen on the famous Abtech SX range of Ex e enclosures.
Abtech hazardous area (ATEX) electrical enclosures and junction boxes for Zone 1 and Zone 2 installations include stainless steel, GRP, aluminium and polycarbonate ranges.
T&D UK distribute from stock Hazardous Area (ATEX Zones 1, 2, 21, 22 Certified) EExd Flameproof & Explosion Proof and EExe Increased Safety electrical enclosures and junction boxes - this includes GRP, stainless steel and aluminium enclosures and junction boxes.
In many of the Pharma and beverages industries, DM or, WFI water is used where pH has to be monitored and output also would be required for remote Indication or, Control. In Effluent and Sewage treatment also pH has to be maintained after its processing.
We provide online pH Electrode with panel mounted Digital pH Indicator with 4 to 20 mA output.
Details of Electrode :
Type of Electrode : Glass Tube type Electrode
Process Connections : 3/8” BSP (M)
Electrode Holder : PP, PTFE or, SS
Electrode Holder Mounting : ¾” BSP (M)
Range : 0 to 14 pH
Resolution : 0.1
Max. Temperature : Electrode with PP Socket up to 60 degree C
Electrode with PTFE Socket up to 100 degree C
Electrode with SS Socket up to 120 degree C
Max. Pressure : 6 bar
Electrical connection : One meter cable with BNC connector
Approx. Length of the assembly : 120 mm
Details of Digital Indicating Transmitter :
Mounting : Panel mounted
Power Supply : 230 V AC
Display : 4 digit, 7 segment LED display
Dimensions : 96 X 96 X 110 mm
Output : Temperature compensated 4 to 20 mA and 1 no. 5 A, 230 V AC
Fuji Molded Case Circuit Breakers BW0 series, 32 Ampere Frame MCCBCTY TNHH HẠO PHƯƠNG
Catalog thiết bị đóng cắt Fuji Electric - Fuji Molded Case Circuit Breakers BW0 series, 32 Ampere Frame MCCB
*********************************************************************
CTY TNHH HẠO PHƯƠNG - Nhà phân phối chính thức các thiết bị điện công nghiệp và tự động hóa của hãng FUJI ELECTRIC JAPAN tại Việt Nam
Xem chi tiết các sản phẩm Fuji Electric tại
http://haophuong.com/b1033533/fuji-electric
Introduction to safety rope switches and a look at a typical installation of a safety pull rope switch along with Emergency pull rope switch range overview. For more details: http://www.tesensors.com/global/en/product/safety-switches/
Hadar Hazardous Area (ATEX) Lighting ranges are suitable for explosive atmosphere environments and are certified to Zone 1, Ex e, Ex d and Zone 2 Ex n hazardous areas – fluorescent, recessed, portable, bulkhead, wellglass, floodlight and LED hazardous area lighting ranges.
The Hadar hazardous area lighting ranges comprises one of the most up to date and innovative lighting portfolios - suitable for explosive atmospheres the range of Hadar hazardous area lighting is certified to Zone 1 & 21, Ex e, Ex d, and Zone 2 & 22 Ex n.
The Hadar Lighting Ex e products feature the “End of Life” (EoL) protection circuit ballast according to DIN EN 61347-2-3 and IEC 60079-7 Ed.4.
Hadar Hazardous Area Lighting is a specialist manufacturer of hazardous area lighting for the oil, gas, petro-chemical, pharmaceutical, offshore and marine industries worldwide offering the design and production of lighting products for Zone 1, 2, 21 & 22, Gas and Dust - this includes ATEX and IEC Ex Explosion Proof Exe & Ex d Lighting ranges : fluorescent, recessed, helideck, LED floodlight, bulkhead and well glass.
The Abtech SSD Ex d Range of stainless steel enclosures are manufactured from either stainless steel 316 or mild steel and provide significant levels of environmental protection. The Abtech SSD Ex d flameproof range uses the same flexible design approach seen on the famous Abtech SX range of Ex e enclosures.
Abtech hazardous area (ATEX) electrical enclosures and junction boxes for Zone 1 and Zone 2 installations include stainless steel, GRP, aluminium and polycarbonate ranges.
T&D UK distribute from stock Hazardous Area (ATEX Zones 1, 2, 21, 22 Certified) EExd Flameproof & Explosion Proof and EExe Increased Safety electrical enclosures and junction boxes - this includes GRP, stainless steel and aluminium enclosures and junction boxes.
In many of the Pharma and beverages industries, DM or, WFI water is used where pH has to be monitored and output also would be required for remote Indication or, Control. In Effluent and Sewage treatment also pH has to be maintained after its processing.
We provide online pH Electrode with panel mounted Digital pH Indicator with 4 to 20 mA output.
Details of Electrode :
Type of Electrode : Glass Tube type Electrode
Process Connections : 3/8” BSP (M)
Electrode Holder : PP, PTFE or, SS
Electrode Holder Mounting : ¾” BSP (M)
Range : 0 to 14 pH
Resolution : 0.1
Max. Temperature : Electrode with PP Socket up to 60 degree C
Electrode with PTFE Socket up to 100 degree C
Electrode with SS Socket up to 120 degree C
Max. Pressure : 6 bar
Electrical connection : One meter cable with BNC connector
Approx. Length of the assembly : 120 mm
Details of Digital Indicating Transmitter :
Mounting : Panel mounted
Power Supply : 230 V AC
Display : 4 digit, 7 segment LED display
Dimensions : 96 X 96 X 110 mm
Output : Temperature compensated 4 to 20 mA and 1 no. 5 A, 230 V AC
Fuji Molded Case Circuit Breakers BW0 series, 32 Ampere Frame MCCBCTY TNHH HẠO PHƯƠNG
Catalog thiết bị đóng cắt Fuji Electric - Fuji Molded Case Circuit Breakers BW0 series, 32 Ampere Frame MCCB
*********************************************************************
CTY TNHH HẠO PHƯƠNG - Nhà phân phối chính thức các thiết bị điện công nghiệp và tự động hóa của hãng FUJI ELECTRIC JAPAN tại Việt Nam
Xem chi tiết các sản phẩm Fuji Electric tại
http://haophuong.com/b1033533/fuji-electric
Introduction to safety rope switches and a look at a typical installation of a safety pull rope switch along with Emergency pull rope switch range overview. For more details: http://www.tesensors.com/global/en/product/safety-switches/
Hi All,
Now you can download my Presentation easily. I changed my Privacy setting.. I wish I can make more presentations for the young salesmen, but I am so busy these days and couldn't reply everyone who need my presentation. So here you can download now and present it to your teams etc.
Regards,
Shahzad Chohan
Foxboro Magnetic Flowmeter for Chemical and Process IndustriesSwanson Flo
Based on Faraday’s law of induction, Foxboro magnetic meters are a reliable ow measurement solution with a lower cost of ownership and maintenance, as well as eld-proven stability to maximize the availability of ow measurement.
With a wide range of liners and electrodes, the 9700A owtube is ideal for the Chemical and Process industries. In combination with the IMT30A, IMT31A and IMT33A transmitters, Foxboro offers an innovative solution designed to meet the demands for all chemical applications such as:
• Clean liquids
• Mixing of chemicals
• Demanding applications including corrosive, abrasive liquids • Rapid variation of the pH value
• For slurries and pastes with high solids content
• Drilling applications, mining slurries with large particles
United Electric 2018 Short Form Product CatalogIves Equipment
United Electric Controls is a premier manufacturer of safety, alarm, and shutdown equipment, and is a a global supplier of pressure and temperature switches, transmitters, sensors, and controls for the process, discrete, semiconductor, aerospace, and defense industries.
Tongher,supplier and manufacturer of electric fence products for security and agriculture from China,offering a whole set of electric fence products,from energizers to wires and cables,posts,insulators,warning sign,etc
Rotronic Data Sheet HygroFlex Ex - protected humidity and temperature transmitter. Reliable measurement under extreme conditions. Info lebih lanjut hubungi Siwali Swantika, Jakarta : 021-45850618 | Surabaya : 031-8421264. Distributor Rotronic di Indonesia
Lewden Electrical Industries has been supplying Electrical Equipment to Industry for over 60 years, established in 1946, Lewden Metal Products as it was then known, developed an expertise in the Metal Die-casting and Machining of products for the Electrical and Components Industry.
Palazzoli plugs, sockets and interlocked socket outlets for industrial, hazardous area (ATEX certified), marine and general low voltage power distribution, control, protection and signalling devices.
Palazzoli Industrial Overview - Industrial distribution boards, Industrial socket outlets, Industrial plugs, Industrial enclosures, Protection and signalling devices, Lighting appliances, Control devices, Protection devices, Inter-locked socket outlets, Mobile plug and socket outlets, Straight plugs.
Palazzoli ATEX Overview - ATEX plugs, ATEX inter-locked sockets, ATEX enclosures, ATEX protection and signalling devices, ATEX lighting.
Lewden Electrical - Palazzoli ATEX Solutions for Explosive Atmospheres: Industrial Plugs & Sockets, ATEX Enclosures, Cable Glands & Fittings, ATEX Control Devices, Lighting Fixtures & Signalling Devices.
Slack (or Teams) Automation for Bonterra Impact Management (fka Social Soluti...Jeffrey Haguewood
Sidekick Solutions uses Bonterra Impact Management (fka Social Solutions Apricot) and automation solutions to integrate data for business workflows.
We believe integration and automation are essential to user experience and the promise of efficient work through technology. Automation is the critical ingredient to realizing that full vision. We develop integration products and services for Bonterra Case Management software to support the deployment of automations for a variety of use cases.
This video focuses on the notifications, alerts, and approval requests using Slack for Bonterra Impact Management. The solutions covered in this webinar can also be deployed for Microsoft Teams.
Interested in deploying notification automations for Bonterra Impact Management? Contact us at sales@sidekicksolutionsllc.com to discuss next steps.
Essentials of Automations: Optimizing FME Workflows with ParametersSafe Software
Are you looking to streamline your workflows and boost your projects’ efficiency? Do you find yourself searching for ways to add flexibility and control over your FME workflows? If so, you’re in the right place.
Join us for an insightful dive into the world of FME parameters, a critical element in optimizing workflow efficiency. This webinar marks the beginning of our three-part “Essentials of Automation” series. This first webinar is designed to equip you with the knowledge and skills to utilize parameters effectively: enhancing the flexibility, maintainability, and user control of your FME projects.
Here’s what you’ll gain:
- Essentials of FME Parameters: Understand the pivotal role of parameters, including Reader/Writer, Transformer, User, and FME Flow categories. Discover how they are the key to unlocking automation and optimization within your workflows.
- Practical Applications in FME Form: Delve into key user parameter types including choice, connections, and file URLs. Allow users to control how a workflow runs, making your workflows more reusable. Learn to import values and deliver the best user experience for your workflows while enhancing accuracy.
- Optimization Strategies in FME Flow: Explore the creation and strategic deployment of parameters in FME Flow, including the use of deployment and geometry parameters, to maximize workflow efficiency.
- Pro Tips for Success: Gain insights on parameterizing connections and leveraging new features like Conditional Visibility for clarity and simplicity.
We’ll wrap up with a glimpse into future webinars, followed by a Q&A session to address your specific questions surrounding this topic.
Don’t miss this opportunity to elevate your FME expertise and drive your projects to new heights of efficiency.
Smart TV Buyer Insights Survey 2024 by 91mobiles.pdf91mobiles
91mobiles recently conducted a Smart TV Buyer Insights Survey in which we asked over 3,000 respondents about the TV they own, aspects they look at on a new TV, and their TV buying preferences.
Key Trends Shaping the Future of Infrastructure.pdfCheryl Hung
Keynote at DIGIT West Expo, Glasgow on 29 May 2024.
Cheryl Hung, ochery.com
Sr Director, Infrastructure Ecosystem, Arm.
The key trends across hardware, cloud and open-source; exploring how these areas are likely to mature and develop over the short and long-term, and then considering how organisations can position themselves to adapt and thrive.
Accelerate your Kubernetes clusters with Varnish CachingThijs Feryn
A presentation about the usage and availability of Varnish on Kubernetes. This talk explores the capabilities of Varnish caching and shows how to use the Varnish Helm chart to deploy it to Kubernetes.
This presentation was delivered at K8SUG Singapore. See https://feryn.eu/presentations/accelerate-your-kubernetes-clusters-with-varnish-caching-k8sug-singapore-28-2024 for more details.
GraphRAG is All You need? LLM & Knowledge GraphGuy Korland
Guy Korland, CEO and Co-founder of FalkorDB, will review two articles on the integration of language models with knowledge graphs.
1. Unifying Large Language Models and Knowledge Graphs: A Roadmap.
https://arxiv.org/abs/2306.08302
2. Microsoft Research's GraphRAG paper and a review paper on various uses of knowledge graphs:
https://www.microsoft.com/en-us/research/blog/graphrag-unlocking-llm-discovery-on-narrative-private-data/
Securing your Kubernetes cluster_ a step-by-step guide to success !KatiaHIMEUR1
Today, after several years of existence, an extremely active community and an ultra-dynamic ecosystem, Kubernetes has established itself as the de facto standard in container orchestration. Thanks to a wide range of managed services, it has never been so easy to set up a ready-to-use Kubernetes cluster.
However, this ease of use means that the subject of security in Kubernetes is often left for later, or even neglected. This exposes companies to significant risks.
In this talk, I'll show you step-by-step how to secure your Kubernetes cluster for greater peace of mind and reliability.
JMeter webinar - integration with InfluxDB and GrafanaRTTS
Watch this recorded webinar about real-time monitoring of application performance. See how to integrate Apache JMeter, the open-source leader in performance testing, with InfluxDB, the open-source time-series database, and Grafana, the open-source analytics and visualization application.
In this webinar, we will review the benefits of leveraging InfluxDB and Grafana when executing load tests and demonstrate how these tools are used to visualize performance metrics.
Length: 30 minutes
Session Overview
-------------------------------------------
During this webinar, we will cover the following topics while demonstrating the integrations of JMeter, InfluxDB and Grafana:
- What out-of-the-box solutions are available for real-time monitoring JMeter tests?
- What are the benefits of integrating InfluxDB and Grafana into the load testing stack?
- Which features are provided by Grafana?
- Demonstration of InfluxDB and Grafana using a practice web application
To view the webinar recording, go to:
https://www.rttsweb.com/jmeter-integration-webinar
JMeter webinar - integration with InfluxDB and Grafana
Rotronic HygroFlex5-EX - HF5-EX Hazardous Area Humidity & Temperature Sensors - Data
1. MEASUREMENT SOLUTIONS
• Measurement of relative humidity and temperature, optional
output of dew point and other calculated parameters
• Safe operation in areas with explosion risk
• Intrinsically safe electrical construction
• No intrinsically safe power supply required
• Interchangeable stainless steel probes
• Robust aluminium housing
RELIABLE MEASUREMENTS
UNDER EXTREME CONDITIONS.
INTRINSICALLY SAFE HUMIDITY
AND TEMPERATURE TRANSMITTERS
Tel: +44 (0)191 490 1547
Fax: +44 (0)191 477 5371
Email: northernsales@thorneandderrick.co.uk
Website: www.heattracing.co.uk
www.thorneanderrick.co.uk
2. The new HygroFlex5-EX series is the latest development in two-channel transmitters for the exact measurement
of humidity and temperature in explosive atmospheres. This device conforms to the latest international
standards.
The HF5-EX series consists of a robust aluminium transmitter with or without display. The attached probes are
cast into a stainless steel tube, and are certified for operation in Zone 0/20. The transmitter itself is certified for
Zone 1/21. The intelligent design of the circuitry with electrical isolation permits the measuring system to be
operated without an intrinsically safe power supply.
TAKE A CLOSE LOOK:
THE MAIN ADVANTAGES AT A GLANCE.
Functional display
• Measurement values with trend indicators
• Configuration via keypad possible
Explosion protection classes (gas and dust)
• Transmitter:
II 2(1) G Ex eb mb [ia Ga] IIC T5 Gb
II 2(1) D Ex tb [ia Ga] IIIC T80°C Db
• Probes:
II 1/2 G Ex ia IIC T5 Ga/Gb
II 1/2 D Ex ia IIIC T80°C Da/Db
Interchangeable probes
• Different probes can be connected
to suit the application
• Easy calibration of the probes outside
the explosive zone
Outputs
• The two analogue outputs can be freely selected
and scaled
• 2-wire (2 x 4...20 mA)
Proven housing
• Robust, reliable aluminium housing
• Protection class IP66
• Wall or duct mount possible
Power supply
• 10…28 VDC
• No intrinsically safe power supply required
Easy configuration
• The configuration can be specified directly when ordering
• Configuration on site is also possible, using the HW4 software
INTRINSICALLY SAFE HUMIDITY AND TEMPERATURE TRANSMITTERS
3. INTERCHANGEABLE STAINLESS STEEL PROBES.
Wall mounting
Cable probe for flexible installation
Duct mounting
Screw-in cable probe for pressure pipe or low dew point
Non-explosive area
Non-explosive area Non-explosive area
Zone1/21Zone1/21
Zone1/2
Zone 0/20 Zone 0/20
Probe
HC2-SM-EX
Probe
HC2-SM-EX
Probe
HC2-IMxxx-EX
2/5/10 Metres of cable
130/280 mm probe
Probe
HC2-IExxx-EX/HC2-LDPxxx-EX
2/5/10 Metres of cable
½“ G/NPT thread
Cable gland
AC1301-MEX
Non-explosivearea
Zone 1/21Zone 0/20
Cable gland AC1301-MEX
INTRINSICALLY SAFE HUMIDITY AND TEMPERATURE TRANSMITTERS
4. 235 61
100
160
30
25
61
160
110
210
100
25
160
30
25
25
61
15
40
104
15
125/285
40
15
97
14
51.5
25
40
10
80
12
14
SW 27
15
97
1 2
„
G / NPT
59041E/2014-09
ROTRONIC AG, Grindelstrasse 6, CH - 8303 Bassersdorf, Tel. +41 44 838 11 11, Fax +41 44 838 14 83, www.rotronic.ch
ROTRONICInstruments(UK)Ltd,CromptonFields,CromptonWay,Crawley,WestSussex,RH109EE,UK,Phone+44(0)1293571000,Fax+44(0)1293571008,www.rotronic.co.uk
ROTRONIC Instrument Corp,135 Engineers Road, Hauppauge, NY 11788, USA , Phone, +1 631 427-3898, Fax, +1 631 427-3902, www.rotronic-usa.com
ROTRONIC Instruments Pte. Ltd., 1003 Bukit Merah Central, #06-31 Inno Centre, Singapore 159836, Phone +65 6376 2107, Fax +65 6376 4439, www.rotronic.sg
TECHNICAL INFORMATION.
Would you like more information (special applications, ordering codes, etc.)? You will always find and up-to-date overview of the HygroFlex5-EX
series on our Internet site at www.rotronic.com.
Wall mounted version (W)
Duct mounted version (D)
HF520-EX-W
HF520-EX-D
HC2-SM-EX
HC2-IMxxx-EX
HC2-IExxx-EX / HC2-LDPxxx-EX
HF520-EX
General
Parameters Humidity and temperature
Calculated parameters All psychrometric parameters available
Housing material / Protection Aluminium (DIN EN 1706 EN AC-AlSi 12 (Fe)) / IP66
Weight Wall mounted version: 1030 g
Duct mounted version: 1140 g
Start-up time Standard cold <60 s / warm <30 s
Measurement interval 20…240 s
Display Optional, LCD without backlight
Electrical connections Connections: Ex-e terminals (0.2…2.5 mm2
)
Cable gland: 16x1.5 (Ø cable 4.5…7 mm)
Power supply 10…28 VDC
Current Consumption 2x24 mA start up / 2x20 mA operation
Application temperature
Housing / electronics
-40…60 °C without display
-10…60 °C with display
Service interface UART internal service interface
(only to be used outside the explosive zone)
CE / EMC compatibility EMC Directive 2004/108/EC
ATEX directives EU94/9/EC (ATEX)
EX identification II 2(1) G Ex eb mb [ia Ga] IIC T5 Gb
II 2(1) D Ex tb [ia Ga] IIIC T80°C Db
Analogue output
Number 2
Current 4…20 mA, two-wire
Galvanic isolation Yes
Maximum load 500 Ohms
Accuracy at 23 °C <20 uA
HC2-SM-EX / HC2-IM-EX / HC2-IE-EX / HC2-LDP-EX
General
Parameters Humidity and temperature
Housing material / Protection Stainless steel / IP66
Cable lengths 2/5/10 metres
EX identification II 1/2 G Ex ia IICT5 Ga/Gb
II 1/2 D Ex ia IIICT80°C Da/Db
Humidity measurement
Sensor HC2-SM/IM/IE-EX: ROTRONIC HYGROMER®
IN-1
HC2-LDP-EX: ROTRONIC HYGROMER®
LDP-1
Adjustment Not via device menu
(only outside the explosive zone with HW4 + AC3001)
Measurement range 0…100 %RH
Accuracy at 23 °C 0.8 %RH
Temperature measurement
Sensor HC2-SM/IM/IE-EX: Pt100 Class A
HC2-LDP-EX: Pt1000 1/3 Class B
Measurement range -40…60 °C
Accuracy at 23 °C 0.1 K
Accessories
Filters Steel sinter filter, SP-FN15
Cable gland AC1301-MEX for duct mounting and cable probes (IM)
INTRINSICALLY SAFE HUMIDITY AND TEMPERATURE TRANSMITTERS
Subjecttotechnicalchangewithoutnotice.Errorsandomissionsexcepted.
Tel: +44 (0)191 490 1547
Fax: +44 (0)191 477 5371
Email: northernsales@thorneandderrick.co.uk
Website: www.heattracing.co.uk
www.thorneanderrick.co.uk