This document appears to be from an ELEC 101 lab manual for Lab 9 on nonsinusoidal waveforms including pulses, ramps, triangular and sawtooth waves. It provides instructions and schematics for building circuits to generate these waveforms and view their outputs using simulation software. The document includes guidance on setting pulse parameters, inserting symbols, and configuring simulations and output displays.

1. ELEC 101
Lab 9

2. Nonsinusoidal Waveforms - Pulse
1 November 2005 ELEC 101 Lab 9 2

3. Nonsinusoidal Waveforms - Ramp
1 November 2005 ELEC 101 Lab 9 3

4. Nonsinusoidal Waveforms -
Triangular
1 November 2005 ELEC 101 Lab 9 4

5. Nonsinusoidal Waveforms - Sawtooth
1 November 2005 ELEC 101 Lab 9 5

6. Pulse Parameters
V1 Minimum Voltage PW Pulse Width time at V2
V2 Maximum Voltage TF Fall Time from V2 to V1
TD Time Delay from 0 to rise PER Period time for 1 cycle
TR Rise Time from V1 to V2
1 November 2005 ELEC 101 Lab 9 6

7. Lab 9 Schematic Symbols
1 November 2005 ELEC 101 Lab 9 7

8. Pulse Property Editor
• After opening the Pulse Property editor, you must enter the
values for TD, TF, TR, V1, V2, PW, and PER from the
keyboard
• The values in the Property Editor are not in order and their
entries may require scrolling
1 November 2005 ELEC 101 Lab 9 8

9. Lab 9 Schematic Symbols
1 November 2005 ELEC 101 Lab 9 9

10. Lab 9 Schematic Symbols
1 November 2005 ELEC 101 Lab 9 10

11. Lab 9A Schematic Symbols
1 November 2005 ELEC 101 Lab 9 11

12. Lab 9 Part References and Values
1 November 2005 ELEC 101 Lab 9 12

13. Lab 9A Schematic
Place Ground Reference Probes at IN and OUT
Place Differential Probes with V+ at IN and V- at OUT
1 November 2005 ELEC 101 Lab 9 13

14. Lab 9A Simulation Settings
1 November 2005 ELEC 101 Lab 9 14

15. Lab 9A Output
1 November 2005 ELEC 101 Lab 9 15

16. Lab 9B Schematic
1 November 2005 ELEC 101 Lab 9 16

17. Lab 9B Simulation Settings
1 November 2005 ELEC 101 Lab 9 17

18. Lab 9B Output
1 November 2005 ELEC 101 Lab 9 18

19. Lab 9C Schematic
1 November 2005 ELEC 101 Lab 9 19

20. Lab 9C Simulation Settings
1 November 2005 ELEC 101 Lab 9 20

21. Lab 9C Y Axis Settings
1 November 2005 ELEC 101 Lab 9 21

22. Lab 9C Output
1 November 2005 ELEC 101 Lab 9 22

23. Lab 9D Schematic
1 November 2005 ELEC 101 Lab 9 23

24. Lab 9D Simulation Settings
1 November 2005 ELEC 101 Lab 9 24

25. Lab 9D Y Axis Settings
1 November 2005 ELEC 101 Lab 9 25

26. Lab 9D Output
1 November 2005 ELEC 101 Lab 9 26

27. Lab 9
Output for Submission

28. Lab 9A Schematic
1 November 2005 ELEC 101 Lab 9 28

29. Lab 9A Output
1 November 2005 ELEC 101 Lab 9 29

30. Lab 9B Schematic
1 November 2005 ELEC 101 Lab 9 30

31. Lab 9B Output
1 November 2005 ELEC 101 Lab 9 31

32. Lab 9C Schematic
1 November 2005 ELEC 101 Lab 9 32

33. Lab 9C Output
1 November 2005 ELEC 101 Lab 9 33

34. Lab 9D Schematic
1 November 2005 ELEC 101 Lab 9 34

35. Lab 9D Output
1 November 2005 ELEC 101 Lab 9 35