This study uses an input-output model based on the Eora database to assess the environmental, economic, and social impacts of automated diesel and electric heavy-duty trucks over their life cycles. The study finds that automated diesel trucks cause more fatalities and have higher global warming potential than automated electric trucks. Health impact costs are also twice as high for automated diesel trucks compared to electric trucks. While automation brings improvements across several sustainability indicators, the study finds trade-offs between environmental gains and losses of mineral and fossil resources that complicate decision making regarding truck automation technology.
An overview of potential future lifecycle impacts of low carbon vehicles. Shifting to hybrid and electric vehicles will mean that an increasing share of lifecycle GHG emissions come from the production of the vehicle and electricity. Presentation given at the annual LowCVP conference by Nik Hill, knowledge leader for transport technology at Ricardo-AEA
ACV des véhicules électriques et thermiques aux US - MITGhislain Delabie
Étude du MIT comparant les émissions de gaz à effet de serre (en équivalent CO2) des véhicules disponibles sur le marché américain, en fonction du mix énergétique de l'électricité alimentant les véhicules.
An overview of potential future lifecycle impacts of low carbon vehicles. Shifting to hybrid and electric vehicles will mean that an increasing share of lifecycle GHG emissions come from the production of the vehicle and electricity. Presentation given at the annual LowCVP conference by Nik Hill, knowledge leader for transport technology at Ricardo-AEA
ACV des véhicules électriques et thermiques aux US - MITGhislain Delabie
Étude du MIT comparant les émissions de gaz à effet de serre (en équivalent CO2) des véhicules disponibles sur le marché américain, en fonction du mix énergétique de l'électricité alimentant les véhicules.
Future of Heavy Duty Vehicles CO2 Emissions Legislation and Fuel Consumption ...JMDSAE
By Dimitrios Savvidis
The talk will be covering :
Latest developments on CO2 legislation in Europe
Overview of GHG emissions in the transport sector in Europe
New simulation tool – VECTO
Future steps
International Journal of Computational Engineering Research(IJCER)ijceronline
International Journal of Computational Engineering Research(IJCER) is an intentional online Journal in English monthly publishing journal. This Journal publish original research work that contributes significantly to further the scientific knowledge in engineering and Technology.
Electric vehicles (EVs) coupled with low-carbon electricity sources offer the potential for
reducing greenhouse gas emissions and exposure to tailpipe emissions from personal trans-
portation. In considering these benefits, it is important to address concerns of problem-
shifting. In addition, while many studies have focused on the use phase in comparing
transportation options, vehicle production is also significant when comparing conventional
and EVs.
EU Smart Mobility and Green Vehicles OrientationsJMDSAE
By Dominique Breuil
Despite the continuation of the main trends identified since the last ten years, the situation of transport for passengers and goods is evolving rapidly. The rapid technological developments (notably due to automation and digitalisation) is reshaping mobility concepts and opening new potentials.
Measuring the Dependence of Fuel Efficiency of Automobiles on Different FactorsIRJESJOURNAL
Abstract: The purpose of this paper is to develop a multiple regression model for measuring the miles per gallon (Efficiency) by using different independent variables. How much the efficiency in terms of miles per gallon is dependent on engine displacement, horsepower, vehicle weight, model year, number of cylinders, and filters? Which is the most important variable for increasing the efficiency of automobiles? The answers of these questions are the objectives of this paper. The results indicate that model year has positive effect on efficiency of vehicle while horse power, vehicle weight, and filters have negative impact on vehicle’s efficiency. Results also specify that vehicle weight has the maximum impact on miles per gallon while horsepower has the minimum impact.
Installation
resilience.io Package Overview
Using the model –step by step
resilience.io Testing Capabilities (and Limitations)
resilience.io Use Examples
Q&A / Interactive Session
The Car of the Future: Electric, but not as you might thinkJMDSAE
By Sebastian Verhelst
The talk will be covering the current challenges for transport, the alternatives we have and how they com-pare, and conclude with the speaker’s personal opin-ion on the most attractive alternative.
Running Head TRUCKING SECTOR1TRUCKING SECTOR6.docxtoltonkendal
Running Head: TRUCKING SECTOR1
TRUCKING SECTOR6
Green Technology for Trucking Sector
Background Information
Heavy and medium-duty trucks play crucial roes in the economy of any nation. Trucking provides employment; influences usage of land; impacts commercial activities; and affects the prices of land as well as other commodities. According to research, the trucking industry in some countries is worth billions. The trucking industry also employs hundreds of thousands of drivers and provides livelihood to other parties that are not directly associated with the trucks (Abate & Road, 2014). Normally, trucking firms are made up of smaller companies that include carriers. There are varying levels of players in the industry from micro-trucking firms that employ from 1 to 4 employees to large motor carriers that employ more than 500 employees. In between these extremes, there are medium carriers. All these have a significant contribution to the carbon footprint.
Whilst the trucking industry bears significant amount of burden to the environment, it is a critical sector that holds the economy and livelihood of many. The industry involves many players from the drivers themselves to policy makers, support services, and government agencies. Striking an equilibrium in the industry core players at any given time determines how the industry runs and its key outcomes. One tough concern that has pervaded the industry over the years has been fuel economy and environmental management issues. Yet the number of goods required to be transported across borders and from one coast of a country to another has been increasing over the years. That means there is need for more trucks on the road igniting myriad environmental and climatic consequences. Ideally, safety, security, sustainability, and stresslessness should drive the trucking sector (O’Rourke, 2012). But with the current situation, it is only with a robust environmental friendly intervention that this can occur.
Over the years, pressures on the transport and logistic industry have been mounting. There has been pressure over environmental concerns so much so that governmental awareness on the same has led to increased pressure on key players in the industry. In addition consumers have also become more aware of the harms that logistics companies cause to the environment. As such, consumers have become demanding regarding green technologies and clean energy initiatives in the transport and logistic industry. In tandem with this change, it has become commonplace to have rising interest for streamlining operations for logistic companies. Firms that adopt greener technologies stand better chances of increasing their competitive edge (O’Rourke, 2012). Introduction of new structures for the logistics industry presents great benefits that may lead to better management of the environment.
Statement of Purpose
The purpose of this paper is to describe different factors that can influence the carbon ...
Evaluate Sustainability of Using Autonomous Vehicles for the Last-mile Delive...BIJIAM Journal
This study aims to determine if autonomous vehicles (AV) for last-mile deliveries are sustainable from three perspectives: social, environmental, and economic. Because of the relevance of AV application for last-mile delivery, safety was only addressed for the sake of societal sustainability. According to this study, it is rather safe to deploy AVs for delivery since current society’s speed restriction and decent road conditions give the foundation for AVs to run safely for last-mile delivery in metropolitan areas. Furthermore, AV has a distinct advantage in the event of a pandemic. The biggest worry for environmental sustainability is the emission problem. In terms of a series of emissions, it is established that AV has a substantial benefit in terms of emission reduction. This is mostly due to the differences in driving behaviour between autonomous cars and human vehicles. Because of AV’s commercial character, this research used a quantitative approach to highlight the economic sustainability of AV. The
study demonstrates the economic benefit of AV for various carrying capacities.
Future of Heavy Duty Vehicles CO2 Emissions Legislation and Fuel Consumption ...JMDSAE
By Dimitrios Savvidis
The talk will be covering :
Latest developments on CO2 legislation in Europe
Overview of GHG emissions in the transport sector in Europe
New simulation tool – VECTO
Future steps
International Journal of Computational Engineering Research(IJCER)ijceronline
International Journal of Computational Engineering Research(IJCER) is an intentional online Journal in English monthly publishing journal. This Journal publish original research work that contributes significantly to further the scientific knowledge in engineering and Technology.
Electric vehicles (EVs) coupled with low-carbon electricity sources offer the potential for
reducing greenhouse gas emissions and exposure to tailpipe emissions from personal trans-
portation. In considering these benefits, it is important to address concerns of problem-
shifting. In addition, while many studies have focused on the use phase in comparing
transportation options, vehicle production is also significant when comparing conventional
and EVs.
EU Smart Mobility and Green Vehicles OrientationsJMDSAE
By Dominique Breuil
Despite the continuation of the main trends identified since the last ten years, the situation of transport for passengers and goods is evolving rapidly. The rapid technological developments (notably due to automation and digitalisation) is reshaping mobility concepts and opening new potentials.
Measuring the Dependence of Fuel Efficiency of Automobiles on Different FactorsIRJESJOURNAL
Abstract: The purpose of this paper is to develop a multiple regression model for measuring the miles per gallon (Efficiency) by using different independent variables. How much the efficiency in terms of miles per gallon is dependent on engine displacement, horsepower, vehicle weight, model year, number of cylinders, and filters? Which is the most important variable for increasing the efficiency of automobiles? The answers of these questions are the objectives of this paper. The results indicate that model year has positive effect on efficiency of vehicle while horse power, vehicle weight, and filters have negative impact on vehicle’s efficiency. Results also specify that vehicle weight has the maximum impact on miles per gallon while horsepower has the minimum impact.
Installation
resilience.io Package Overview
Using the model –step by step
resilience.io Testing Capabilities (and Limitations)
resilience.io Use Examples
Q&A / Interactive Session
The Car of the Future: Electric, but not as you might thinkJMDSAE
By Sebastian Verhelst
The talk will be covering the current challenges for transport, the alternatives we have and how they com-pare, and conclude with the speaker’s personal opin-ion on the most attractive alternative.
Running Head TRUCKING SECTOR1TRUCKING SECTOR6.docxtoltonkendal
Running Head: TRUCKING SECTOR1
TRUCKING SECTOR6
Green Technology for Trucking Sector
Background Information
Heavy and medium-duty trucks play crucial roes in the economy of any nation. Trucking provides employment; influences usage of land; impacts commercial activities; and affects the prices of land as well as other commodities. According to research, the trucking industry in some countries is worth billions. The trucking industry also employs hundreds of thousands of drivers and provides livelihood to other parties that are not directly associated with the trucks (Abate & Road, 2014). Normally, trucking firms are made up of smaller companies that include carriers. There are varying levels of players in the industry from micro-trucking firms that employ from 1 to 4 employees to large motor carriers that employ more than 500 employees. In between these extremes, there are medium carriers. All these have a significant contribution to the carbon footprint.
Whilst the trucking industry bears significant amount of burden to the environment, it is a critical sector that holds the economy and livelihood of many. The industry involves many players from the drivers themselves to policy makers, support services, and government agencies. Striking an equilibrium in the industry core players at any given time determines how the industry runs and its key outcomes. One tough concern that has pervaded the industry over the years has been fuel economy and environmental management issues. Yet the number of goods required to be transported across borders and from one coast of a country to another has been increasing over the years. That means there is need for more trucks on the road igniting myriad environmental and climatic consequences. Ideally, safety, security, sustainability, and stresslessness should drive the trucking sector (O’Rourke, 2012). But with the current situation, it is only with a robust environmental friendly intervention that this can occur.
Over the years, pressures on the transport and logistic industry have been mounting. There has been pressure over environmental concerns so much so that governmental awareness on the same has led to increased pressure on key players in the industry. In addition consumers have also become more aware of the harms that logistics companies cause to the environment. As such, consumers have become demanding regarding green technologies and clean energy initiatives in the transport and logistic industry. In tandem with this change, it has become commonplace to have rising interest for streamlining operations for logistic companies. Firms that adopt greener technologies stand better chances of increasing their competitive edge (O’Rourke, 2012). Introduction of new structures for the logistics industry presents great benefits that may lead to better management of the environment.
Statement of Purpose
The purpose of this paper is to describe different factors that can influence the carbon ...
Evaluate Sustainability of Using Autonomous Vehicles for the Last-mile Delive...BIJIAM Journal
This study aims to determine if autonomous vehicles (AV) for last-mile deliveries are sustainable from three perspectives: social, environmental, and economic. Because of the relevance of AV application for last-mile delivery, safety was only addressed for the sake of societal sustainability. According to this study, it is rather safe to deploy AVs for delivery since current society’s speed restriction and decent road conditions give the foundation for AVs to run safely for last-mile delivery in metropolitan areas. Furthermore, AV has a distinct advantage in the event of a pandemic. The biggest worry for environmental sustainability is the emission problem. In terms of a series of emissions, it is established that AV has a substantial benefit in terms of emission reduction. This is mostly due to the differences in driving behaviour between autonomous cars and human vehicles. Because of AV’s commercial character, this research used a quantitative approach to highlight the economic sustainability of AV. The
study demonstrates the economic benefit of AV for various carrying capacities.
This research is aimed at confirming whether the autonomous vehicles (AV) for last-mile delivery is sustainable in terms of three aspects – social sustainability, environmental sustainability, and economic sustainability. The safety was solely considered for the social sustainability because of its importance of AV application for lastmile delivery. This study finds that it is relatively safe to use AVs for delivery because of the speed limit of actual society and the good road conditions provide the ground that AV runs safely for last-mile delivery in urban areas. Besides, AV has a special advantage when facing pandemic. For environmental sustainability, the emission problem
is the main concern. It is concluded that AV has a significant advantage in emission reduction in terms of a series of emissions. This mainly results from the driving behaviors difference between AV and human vehicles. As for the economic sustainability of AV, this research adopted a quantitative way to illustrate because the cost of AV is essential to consider because of AV’s commercial nature. The research reveals the cost advantage of AV under different
carrying capabilities.
Drivers influencing the transport costs Aniello EspositoAniello Esposito
Transport covers a strategic role for the development of trade and is a key element in people’s lives. Transport system has become indispensable for our survival, and important is the study of its costs to win the competition in the business world, to make efficient our movements and to reduce the waste of resources.
Below, the main drivers affecting the transport costs and their changes will be analysed with a focus on transport of goods.
Navigating the governance challenges of disruptive technologies insights from...Araz Taeihagh
The proliferation of autonomous systems like unmanned aerial vehicles, autonomous vehicles and AI-powered industrial and social robots can benefit society significantly, but these systems also present significant governance challenges in operational, legal, economic, social, and ethical dimensions. Singapore’s role as a front-runner in the trial of autonomous systems presents an insightful case to study whether the current provisional regulations address the challenges. With multiple stakeholder involvement in setting provisional regulations, government stewardship is essential for coordinating robust regulation and helping to address complex issues such as ethical dilemmas and social connectedness in governing autonomous systems.
The implementation of government subsidies and tax incentives to enhance the ...Fardeen Ahmed
In this research paper (a riview of literature), I illustrated the effect of government subsidies and tax incentives to accelerate the overall sales and production of Electric vehicle (EVs) in Bangladesh. I would like to thank my professor Gamal Atallah, who is an Associate Professor at the Economics department of University of Ottawa, for guiding me throughout the semester to complete this paper.
Model for Evaluating CO2 Emissions and the Projection of the Transport Sector IJECEIAES
This article presents a system dynamics model to analyze the growth of cars and the effect of different policies on carbon emissions from the transport sector. The simulation model used in this work was built using the methodology of systems dynamics (SD) developed by Jay W. Forrester at the Massachusetts Institute of Technology (MIT). The model was applied to the transport sector of the city of Bogota, Colombia for a period of time between 2005 and 2050. The information used to feed the model comes from reliable sources such as DANE (National Administrative Department of Statistics) and EIA (U.S Energy Information Administration). Four scenarios were proposed that relate urban development policy and environmental policy. The main results indicate that the number of cars in Bogota can reach up to 13 million vehicles in 2050 and the projection of CO2 emissions would reach 34 million TonCO2 in the absence of an appropriate environmental policy.
SUSTAINABILITY OF SUPPLY CHAINS IN COSTA RICA FOCUSING ON FREIGHT TRANSPORTAT...ijmvsc
This paper explores sustainability in supply chains in Costa Rica through an overview of the industrial
sector and identifies its most common characteristics. Moreover, relying on the carbon footprint indicator
and using estimates of the carbon emissions from a supply chain network, mainly associated with
transportation, arrives at the conclusion that they should be carefully examined to promote initiatives of
sustainability and to reduce the carbon footprint in accordance to the government’s intention to become
carbon neutral by 2021. Throughout the research it was found that the old rail infrastructure from the
central plateau to the ports is rather attractive to reduce carbon emissions. The paper also presents
options to achieve sustainability and points out challenges that must be overcome denoting the deficient transportation infrastructure as the most critical. The aim of this work is to call attention to the need to undertake a plan for freight transportation suitable to reduce emissions and secure sustainability.
Vaccine management system project report documentation..pdfKamal Acharya
The Division of Vaccine and Immunization is facing increasing difficulty monitoring vaccines and other commodities distribution once they have been distributed from the national stores. With the introduction of new vaccines, more challenges have been anticipated with this additions posing serious threat to the already over strained vaccine supply chain system in Kenya.
Immunizing Image Classifiers Against Localized Adversary Attacksgerogepatton
This paper addresses the vulnerability of deep learning models, particularly convolutional neural networks
(CNN)s, to adversarial attacks and presents a proactive training technique designed to counter them. We
introduce a novel volumization algorithm, which transforms 2D images into 3D volumetric representations.
When combined with 3D convolution and deep curriculum learning optimization (CLO), itsignificantly improves
the immunity of models against localized universal attacks by up to 40%. We evaluate our proposed approach
using contemporary CNN architectures and the modified Canadian Institute for Advanced Research (CIFAR-10
and CIFAR-100) and ImageNet Large Scale Visual Recognition Challenge (ILSVRC12) datasets, showcasing
accuracy improvements over previous techniques. The results indicate that the combination of the volumetric
input and curriculum learning holds significant promise for mitigating adversarial attacks without necessitating
adversary training.
Quality defects in TMT Bars, Possible causes and Potential Solutions.PrashantGoswami42
Maintaining high-quality standards in the production of TMT bars is crucial for ensuring structural integrity in construction. Addressing common defects through careful monitoring, standardized processes, and advanced technology can significantly improve the quality of TMT bars. Continuous training and adherence to quality control measures will also play a pivotal role in minimizing these defects.
Student information management system project report ii.pdfKamal Acharya
Our project explains about the student management. This project mainly explains the various actions related to student details. This project shows some ease in adding, editing and deleting the student details. It also provides a less time consuming process for viewing, adding, editing and deleting the marks of the students.
Event Management System Vb Net Project Report.pdfKamal Acharya
In present era, the scopes of information technology growing with a very fast .We do not see any are untouched from this industry. The scope of information technology has become wider includes: Business and industry. Household Business, Communication, Education, Entertainment, Science, Medicine, Engineering, Distance Learning, Weather Forecasting. Carrier Searching and so on.
My project named “Event Management System” is software that store and maintained all events coordinated in college. It also helpful to print related reports. My project will help to record the events coordinated by faculties with their Name, Event subject, date & details in an efficient & effective ways.
In my system we have to make a system by which a user can record all events coordinated by a particular faculty. In our proposed system some more featured are added which differs it from the existing system such as security.
Hybrid optimization of pumped hydro system and solar- Engr. Abdul-Azeez.pdffxintegritypublishin
Advancements in technology unveil a myriad of electrical and electronic breakthroughs geared towards efficiently harnessing limited resources to meet human energy demands. The optimization of hybrid solar PV panels and pumped hydro energy supply systems plays a pivotal role in utilizing natural resources effectively. This initiative not only benefits humanity but also fosters environmental sustainability. The study investigated the design optimization of these hybrid systems, focusing on understanding solar radiation patterns, identifying geographical influences on solar radiation, formulating a mathematical model for system optimization, and determining the optimal configuration of PV panels and pumped hydro storage. Through a comparative analysis approach and eight weeks of data collection, the study addressed key research questions related to solar radiation patterns and optimal system design. The findings highlighted regions with heightened solar radiation levels, showcasing substantial potential for power generation and emphasizing the system's efficiency. Optimizing system design significantly boosted power generation, promoted renewable energy utilization, and enhanced energy storage capacity. The study underscored the benefits of optimizing hybrid solar PV panels and pumped hydro energy supply systems for sustainable energy usage. Optimizing the design of solar PV panels and pumped hydro energy supply systems as examined across diverse climatic conditions in a developing country, not only enhances power generation but also improves the integration of renewable energy sources and boosts energy storage capacities, particularly beneficial for less economically prosperous regions. Additionally, the study provides valuable insights for advancing energy research in economically viable areas. Recommendations included conducting site-specific assessments, utilizing advanced modeling tools, implementing regular maintenance protocols, and enhancing communication among system components.
Welcome to WIPAC Monthly the magazine brought to you by the LinkedIn Group Water Industry Process Automation & Control.
In this month's edition, along with this month's industry news to celebrate the 13 years since the group was created we have articles including
A case study of the used of Advanced Process Control at the Wastewater Treatment works at Lleida in Spain
A look back on an article on smart wastewater networks in order to see how the industry has measured up in the interim around the adoption of Digital Transformation in the Water Industry.
Automobile Management System Project Report.pdfKamal Acharya
The proposed project is developed to manage the automobile in the automobile dealer company. The main module in this project is login, automobile management, customer management, sales, complaints and reports. The first module is the login. The automobile showroom owner should login to the project for usage. The username and password are verified and if it is correct, next form opens. If the username and password are not correct, it shows the error message.
When a customer search for a automobile, if the automobile is available, they will be taken to a page that shows the details of the automobile including automobile name, automobile ID, quantity, price etc. “Automobile Management System” is useful for maintaining automobiles, customers effectively and hence helps for establishing good relation between customer and automobile organization. It contains various customized modules for effectively maintaining automobiles and stock information accurately and safely.
When the automobile is sold to the customer, stock will be reduced automatically. When a new purchase is made, stock will be increased automatically. While selecting automobiles for sale, the proposed software will automatically check for total number of available stock of that particular item, if the total stock of that particular item is less than 5, software will notify the user to purchase the particular item.
Also when the user tries to sale items which are not in stock, the system will prompt the user that the stock is not enough. Customers of this system can search for a automobile; can purchase a automobile easily by selecting fast. On the other hand the stock of automobiles can be maintained perfectly by the automobile shop manager overcoming the drawbacks of existing system.
Saudi Arabia stands as a titan in the global energy landscape, renowned for its abundant oil and gas resources. It's the largest exporter of petroleum and holds some of the world's most significant reserves. Let's delve into the top 10 oil and gas projects shaping Saudi Arabia's energy future in 2024.
Sachpazis:Terzaghi Bearing Capacity Estimation in simple terms with Calculati...Dr.Costas Sachpazis
Terzaghi's soil bearing capacity theory, developed by Karl Terzaghi, is a fundamental principle in geotechnical engineering used to determine the bearing capacity of shallow foundations. This theory provides a method to calculate the ultimate bearing capacity of soil, which is the maximum load per unit area that the soil can support without undergoing shear failure. The Calculation HTML Code included.
Forklift Classes Overview by Intella PartsIntella Parts
Discover the different forklift classes and their specific applications. Learn how to choose the right forklift for your needs to ensure safety, efficiency, and compliance in your operations.
For more technical information, visit our website https://intellaparts.com
Halogenation process of chemical process industries
Jiec.12964
1. DOI: 10.1111/jiec.12964
R E S E A R C H A N D A N A LY S I S
Life cycle sustainability assessment of autonomous
heavy-duty trucks
Burak Sen1
Murat Kucukvar2
Nuri C. Onat3
Omer Tatari1
1Department of Civil, Environmental, and
Construction Engineering, University of Central
Florida, Orlando, Florida
2Department of Mechanical and Industrial
Engineering, Qatar University, Doha, Qatar
3Qatar Transportation and Traffic Safety Center,
Qatar University, Doha, Qatar
Correspondence
OmerTatari,4000CentralFloridaBlvd.,Orlando,
FL32816-2450.
Email:tatari@ucf.edu
EditorManagingReview:JouleBergerson
Abstract
Connectedandautomatedvehicles(CAVs)areemergingtechnologiesexpectedtobringimportant
environmental, social, and economic improvements in transportation systems. Given their impli-
cations in terms of air quality and sustainable and safer movement of goods, heavy-duty trucks
(HDTs), carrying the majority of U.S. freight, are considered an ideal domain for the application of
CAV technology. An input–output (IO) model is developed based on the Eora database—a detailed
IO database that consists of national IO tables, covering almost the entire global economy. Using
the Eora-based IO model, this study quantifies and assesses the environmental, economic, and
social impacts of automated diesel and battery electric HDTs based on 20 macro-level indicators.
The life cycle sustainability performances of these HDTs are then compared to that of a conven-
tional diesel HDT. The study finds an automated diesel HDT to cause 18% more fatalities than an
automated electric HDT. The global warming potential (GWP) of automated diesel HDTs is esti-
mated to be 4.7 thousand metric tons CO2-eq. higher than that of automated electric HDTs. The
health impact costs resulting from an automated diesel HDT are two times higher than that of an
automated electric HDT. Overall, the results also show that automation brings important improve-
ments to the selected sustainability indicators of HDTs such as global warming potential, life cycle
cost, GDP, decrease in import, and increase in income. The findings also show that there are signif-
icant trade-offs particularly between mineral and fossil resource losses and environmental gains,
which are likely to complicate decision-making processes regarding the further development and
commercialization of the technology.
K E Y W O R D S
hybrid input–output analysis, industrial ecology, life cycle sustainability assessment (LCSA),
sustainable freight transportation, connected automated trucks
1 INTRODUCTION
Connected and automated vehicle (CAV) technology is expected to herald a new era for transportation increasing the system’s efficiency and revo-
lutionizing the way that goods move around the world. The CAV technology essentially provides means of communication among vehicles as well as
between vehicles and infrastructure. Once vehicles are in the communication range, they become connected to each other, including infrastructure,
and this vehicular connectivity facilitates automated driving. Given their socio-economic and environmental impacts and the potential of the CAV
technology for operating-cost savings and environmental improvement (U.S. Energy Information Administration, 2017), heavy-duty trucks (HDTs)
are considered an ideal vehicle segment for early adoption of this emerging technology—possibly earlier than passenger vehicles (Shanker et al.,
2013). On one hand, it is deemed possible that the use of fully automated trucks will reduce these costs by as much as 30% (International Trans-
port Forum, 2017), including driver costs approaching zero (Wadud, Mackenzie, & Leiby, 2016). In addition to costs, the introduction of automated
trucking is also expected to bring improvements in terms of energy use and associated emissions owing to greater fuel efficiency and increased
operational efficiency (Barth, Boriboonsomsin, & Wu, 2014; Collingwood, 2018; Greenblatt & Shaheen, 2015; Slowik & Sharpe, 2018). On the other
Journal of Industrial Ecology 2020;24:149–164. c
○ 2019 by Yale University 149
wileyonlinelibrary.com/journal/jiec
2. 150 SEN ET AL.
TABLE 1 List of acronyms used in the manuscript
AFLEET Alternative fuel life-cycle environmental and economic transportation
A-HDT Autonomous heavy-duty truck
APEEP Air pollution emission experiment and policy
BE Battery electric
CAV Connected autonomous vehicle
CNG Compressed natural gas
DALY Disability-adjusted life year
GDP Gross domestic production
GHG Greenhouse gas emissions
GOS Gross operating surplus
GREET Greenhouse gas, regulated emissions, and energy use in transportation
GWP Global warming potential
HDT Heavy-duty truck
IE Industrial ecology
IO Input–output
LCA Life cycle assessment
LCSA Life cycle sustainability assessment
LCC Life cycle costing
LNG Liquefied natural gas
PMFP Particulate matter formation potential
POFP Photochemical oxidant formation potential
SDA Structural decomposition analysis
SUT Supply and use tables
TCO Total cost of ownership
VMT Vehicle miles traveled
VOC Volatile organic compound
WF Water footprint
hand, some researchers argue that the CAV technology may cause a rebound effect, increasing both travel demand and freight demand, which are
likely to result in increased energy consumption and public health problems (Crayton & Meier, 2017; Ross & Guhathakurta, 2017; Wadud et al.,
2016).
Overall, the CAV technology has a potential to alleviate the impacts of environmental and socio-economic issues caused by freight transporta-
tion and trucking in particular, with the implications of automated HDTs going beyond the trucking industry to include cybersecurity (Van Meldert
& De Boeck, 2016), public health, public policy (Slowik & Sharpe, 2018), urban planning, and ethics (Alessandrini, Campagna, Site, Filippi, & Persia,
2015). However, a great deal of uncertainty still remains in how these impacts will be experienced (Fitzpatrick et al., 2017). This study attempts
to contribute to efforts to shed light on some of these uncertainties by exploring the sustainability impacts of automated HDTs (A-HDTs). Going
beyond life cycle assessment (LCA), which mainly focuses on environmental and energy analysis of an economic activity, the life cycle sustainability
assessment (LCSA) framework presents an effective means to broaden the impact analysis by capturing social and economic impacts of such an
activity, in addition to its environmental impacts (Sala, Farioli, & Zamagni, 2013). IO analysis is regarded as an important component of industrial
ecology toolbox that applies to LCSA studies (Guinée et al., 2011). Jeswani, Azapagic, Schepelmann, and Ritthoff (2010) underline the usefulness
of combining IO analysis with LCA to create hybrid models that can capture the LCS impacts of intra- and inter-sectoral activities. Hence, IO-based
LCSA is employed to investigate the potential LCS impacts of truck automation. For the reader’s convenience, Table 1 provides the acronyms used
throughout the manuscript.
1.1 Objective of the study
The scholars that engage in the research related to the CAV technology seem to agree on the potential benefits of the technology with respect
to traffic safety. However, it does not seem possible to claim such a consensus on the potential environmental and other socio-economic
3. SEN ET AL. 151
FIGURE 1 System boundary for the life cycle sustainability assessment
impacts of the automation of HDTs. This is a good indication of the need for diversifying the research done on this emerging technology
to grasp a better understanding of its multidimensional implications from a holistic perspective, which is also evident from the reviewed
literature.
The primary objective of this study is to quantify, assess, and compare the macro-level LCS impacts of automated HDTs taking the environmental,
social, and economic dimensions into account based on current techno-economic circumstances. The use table within the input–output framework
gives information not only on primary inputs into industries’ production system, but also on the cost structures of industries and their activities
(Eurostat, 2008). Current technological and economic circumstances are important determinants of these cost structures, which, in turn, have a
significant influence on the multiplier matrix values used to estimate impacts. As known, the main inputs to an economic input-output-based LCSA
model are the unit costs of variables that are included in the system boundary under examination (Kucukvar, 2013). These unit costs are influenced
by vehicle types and their technical specifications (Rogge, van der Hurk, Larsen, & Sauer, 2018). For example, truck platooning is regarded as a new
mode in terms of cost structure (Meersman et al., 2016). In another example, user cost structures are defined as those costs related to vehicle
ownership and vehicle use such as purchase, insurance, and fuel (U.S. Department of Transportation, 2018). Accordingly, several considerations in
this study, for example, changing diesel prices, changing electricity prices, deterioration of tailpipe emissions over time (which affect the overall
health damage costs), changing battery prices, fuel economies of HDTs, and so forth , take into account these circumstances. The study investigates
these dimensions based on the indicators that are presented in Table S1 in Supporting Information S1 specifically for U.S. Class 8 diesel and battery
electric (BE) automated HDTs with a truck-trailer as defined by U.S. Department of Energy (2011). The developed IO model focuses on the United
States for the year 2015—the latest data year in Eora database at the time of the study (Fry et al., 2018).
Industrial ecology (IE) is concerned with the sustainability of resources (e.g., materials and energy) used in producing goods and services as
well as the analysis of the impacts of consumption on the environment, society, and economy, that is, the three pillars of sustainability (Clift &
Druckman, 2016). In doing so, IE adopts a system perspective to operationalize forward-looking research and practice taking into account the
role of technological change (Lifset & Graedel, 2002). LCSA, which is viewed as either an analytical framework (Guinée et al., 2011) or a holis-
tic method (Kloepffer, 2008), is an IE tool widely used to investigate the sustainability of production and consumption activities (Gloria, Guinée,
Kua, Singh, & Lifset, 2017). Within this context, this study also aims to contribute to (a) filling a research gap on potential sustainability impacts
of A-HDTs based on the system boundary shown in Figure 1, (b) advancing the LCSA literature on CAVs by providing another example of the inte-
gration of IO analysis for LCSA, and finally (c) contributing to the current special issue of the Journal of Industrial Ecology on “Life Cycle Assess-
ment of Emerging Technologies” by developing the first empirical study on the LCSA of emerging autonomous truck technologies in the United
States.
4. 152 SEN ET AL.
1.2 Literature review
Several studies have employed IO modeling based on the Eora database created by (Lenzen, Kanemoto, Moran, & Geschke, 2012a) and the LCSA
framework. Readers who are interested in the publications excluded from the review and apply Eora-based IO modeling and the LCSA frame-
work in a wider scientific spectrum are referred to Lenzen, Kanemoto, Moran, and Geschke (2012b) and Onat, Kucukvar, Halog, and Cloutier
(2017).
In recent years, the research on the application of CAV technology in passenger vehicles has attracted relatively more attention from
researchers (Fitzpatrick et al., 2017). Hence, even though LCSA is applied on different types of production systems (Zamagni, Pesonen, & Swarr,
2013), the literature on A-HDTs is not as abundant as the literature on automated passenger vehicles and LCA of alternative fuel HDTs. Using
Argonne National Laboratory’s process LCA model Greenhouse Gas, Regulated Emissions, and Energy Use in Transportation (GREET) (Center for
Transportation Research, 2016), Gaines, Stodolsky, Cuenca, and Eberhardt (1998, June) made one of the first life-cycle analyses of alternative fuel-
powered Class 8 heavy trucks to investigate energy use and emissions from Fischer–Tropsch diesel and liquefied natural gas (LNG) powered trucks
and their manufacturing as well as recycling. The study found the vehicle operation (e.g., fuel economy, payload, and vehicle-miles-traveled [VMT])
to dominate energy consumption and emissions. They concluded that natural gas powered trucks did not perform better with respect to energy or
emission. Beer, Grant, Williams, and Watson (2002) applied a process LCA method to examine life cycle tailpipe emissions, fuel cycle greenhouse
gas (GHG) emissions, and fuel production-related emissions from diesel, compressed natural gas (CNG), LNG, liquefied petroleum gas (LPG), and
biodiesel heavy-duty vehicles. They found that biodiesel outperforms other fuels given emissions from renewable carbon stocks are not counted,
and they also highlighted the sensitivity of results to energy type used in the fuel production process. The study lacked the consideration of the com-
plete life cycle assessment. Graham, Rideout, Rosenblatt, and Hendren (2008) compared GHG emissions from trucks fueled with diesel, biodiesel,
CNG, hythane (20% hydrogen, 80% CNG), and LNG, and concluded that GHG emissions varied depending on the choice of fuel, revealing that the
use of natural gas only moderately improved the tailpipe emissions compared to conventional truck. Meyer, Green, Corbett, Mas, and Winebrake
(2011) conducted a comparative total fuel cycle analysis of diesel and alternative fuel (i.e., diesel and its variations, biodiesel, CNG, and LNG) HDTs,
carrying 20 metric-tons of cargo, based on the GREET model. The researchers found tailpipe emissions to be the main contributor to total GHG
emissions, concluding that fuel economy and truck payload are two key variables that affect operational emissions. Tong, Jaramillo, and Azevedo
(2015) made a comparative analysis of natural gas pathways for medium and HDTs, including Class 8 tractor-trailers and refuse trucks, and found
that, compared to diesel trucks, the use of natural gas did not reduce emissions per unit of freight-distance moved. They further concluded that
current technologies do not provide good opportunities to achieve desired reductions in emissions from natural gas-fueled Class 8 trucks. Nahlik,
Kaehr, Chester, Horvath, and Taptich (2015) estimated GHG and conventional air pollutant emissions from diesel, LNG, and hybrid-electric HDT
freight activities inside and associated with California using process LCA method considering vehicle and fuel manufacturing, vehicle operation and
maintenance, including roadway infrastructure and maintenance. They found that switching to LNG, with 1% annual fuel economy improvement,
offers short-term reductions, but long-term increases. The study concluded that electric-propulsion trucks can lead to additional GHG emission
reductions and that higher deployment of zero-emission vehicles is needed for California to meet emission reduction goals. Gruel and Stanford
(2016) developed a system dynamics simulation model to examine the impacts of autonomous vehicles on traveling behavior, mode choice, and
broader transportation system based on various scenarios. The researchers concluded that VMT is likely to increase resulting in increased energy
consumption and associated emissions; however, they have not reported any estimation in this regard. They also confirmed the potential of AV
technology to improve mobility and traffic safety. Wadud et al. (2016) examined travel-related energy consumption and emissions of both light-
and heavy-duty vehicle automation based on an extensive literature review. They underlined the significance of automated vehicle operation for
sustainability profile of these vehicles, and found that different level of vehicle automation results in different energy outcomes and travel impacts,
with a high level of automation potentially increasing travel activities and the associated energy consumption. They concluded highlighting the
importance of further research on how mobility models, vehicle design, fuel choices, and driver’s behavior will change the implications of vehicle
automation to improve our understanding of these responses. Harper, Hendrickson, and Samaras (2016) conducted a cost–benefit analysis of par-
tially automated vehicle collision avoidance technologies used in U.S. light-duty vehicles. The researchers only considered the social cost of crashes
and estimated that over 130 thousand injury crashes and over 10 thousand fatal crashes could be avoided through the use of such technologies
resulting in $20 billion net benefits. They did not, however, include the social cost of air pollution, and suggested that VMT is an important parame-
ter to incorporate in economic analysis.
To and Lee (2017) used a triple-bottom-line approach to assess the sustainability performance of Hong Kong’s logistics sector based on three
nonlinear equation representing environmental, economic, and social performances. They considered GHG emissions to be the only environmental
performance indicator; value-added values and R&D expenditures to be the only economic indicators; and education, health, housing, public safety,
employment, and income to be the social indicators. They found the sector’s environmental performance to remain steady, and economic and social
performances to show a downward trend. The researchers did not include various indicators included in this study, and did not report any result on
the social indicators except for employment. Ross and Guhathakurta (2017) quantified the impact of AVs on energy use under three autonomous
vehicle dominance scenarios based on literature review. Like Wadud et al. (2016), they found a great variation in energy consumption rates for
different automation levels, with full automation generally resulting in more energy consumption through the induced increase in travel demand,
5. SEN ET AL. 153
and ultimately, higher VMT. Bösch, Becker, Becker, and Axhausen (2018) conducted a cost-based analysis of fully autonomous mobility services for
different operational modes such as ride-sharing and taxis, public transportation, and private vehicle. Their study found that vehicle automation
brings substantial decreases in taxis and public transportation services, while the cost of private vehicle and rail services changed only marginally.
They concluded based on the study result and ongoing developments that electric vehicles will be the prevailing choice by the time autonomous
vehicle is introduced. Heard, Taiebat, Xu, and Miller (2018) examined the sustainability implications of CAVs for supplying food without employ-
ing an analytical approach. The researchers pointed out the criticality of evaluating the environmental performance of the CAV technology and
highlighted the importance of the inclusion of social aspects of the technology in assessing its economic impacts. A recent review study concluded
that developing quantitative social and economic life cycle indicators and life cycle-based approaches to investigate various product development
scenarios and practical ways to cope with uncertainties still remain as the main challenges of the LCSA framework for sustainability assessment of
emerging technologies (Guinée, 2016).
Different approaches such as deterministic models, econometric models, and dynamic simulation models have been employed to answer impor-
tant questions and generate valuable knowledge on a likely future under the dominance of CAVs. Even though several projects on automated
HDTs—particularly on platooning of A-HDTs (Tsugawa, Jeschke, & Shladover, 2016)—exist, the authors have also observed that the research on
connected automated HDTs is quite limited and most of these studies focused primarily on full-market existing systems rather than new technolo-
gies. Cucurachi, van der Giesen, and Guinée (2018) concluded that to achieve a more sustainable society, new technologies and their life cycle
sustainability impacts needs to be proven with sound and systematic methodologies. As observed, there are many studies in the literature that
investigate environmental and economic impacts of alternative vehicle technologies; the sustainability impacts (i.e., encompassing environmental,
social, and economic dimensions) of emerging vehicle technologies such as connected automated vehicles have not been investigated sufficiently.
These make those calls made by several researchers for additional research reasonable (Barth et al., 2014; Bechtsis, Tsolakis, Vlachos, & Iakovou,
2017; Gruel & Stanford, 2016; Slowik & Sharpe, 2018).
The literature review has also shown that the social cost of emissions has not been included in most of the studies. The authors agree with
Wadud et al. (2016) on the level of uncertainty in the environmental and energy impacts of AVs (especially of A-HDTs), and that it is difficult to truly
predict these impacts under the current circumstances. However, it is crucial to take a snapshot of the potential life cycle sustainability impacts
of A-HDTs based on possible A-HDT specifications given by the literature and relevant reports. To this end, the current research presented is the
first empirical study on the life cycle environmental, economic and social impacts of connected and automated trucks that are considered as an
emerging technology in sustainable freight transportation in the United States.
2 METHODS
2.1 Life cycle sustainability assessment
Kloepffer (2008) made the first attempt to formulate the LCSA framework, with subsequent contributions from Finkbeiner, Schau, Lehmann, and
Traverso (2010). Accordingly, LCSA was defined as follows:
LCSA = LCA + LCC + SLCA (1)
LCSA framework can be operationalized with the IO analysis method introduced by Leontief (1970). This method was also used in previous mod-
els developed for the U.S. (Kucukvar & Tatari, 2013), the UK, and Australian economies (Foran, Lenzen, Dey, & Bilek, 2005). Using an industry-by-
industry IO format, hybrid LCSA models have been constructed for different domains such as vehicle technologies (Onat, Kucukvar, & Tatari, 2014)
and highway construction (Kucukvar, Noori, Egilmez, & Tatari, 2014). Various formats and their usage in the input–output models are explained in
the Eurostat manual in greater detail (Eurostat, 2008).
A single region industry-by-industry IO model has been constructed for the U.S. economy based on the Eora database developed by Lenzen,
Moran, Kanemotos, and Geschke (2013) to investigate the sustainability performance of U.S. A-HDTs. As a highly consistent and one of the most
detailed global databases (Wiedmann, Schandl, & Moran, 2015), Eora consists of national IO tables, covering approximately the entire global econ-
omy (Lenzen et al., 2013).
In Eora, an IO table is constructed converting Supply and Use Tables (SUTs) of 190 countries that are merged with environmental, social, and
economic satellite accounts such as GHG emissions, labor inputs, energy use, and water requirements into Make and Use Matrixes for the purposes
of this study (Lenzen et al., 2013).
The Use matrix, denoted as U, gives information on the consumption of commodities by other industries or final demand categories
(i.e., households, government, investment, and export). In this matrix, the columns show commodities purchased by industries, whereas
the rows show industries that use those commodities. As a component of U, uij denotes the value of the purchase of commodity i by
6. 154 SEN ET AL.
industry j. Using the information provided by U, the technical coefficient matrix B is computed through the following equation (Miller & Blair,
2009):
B =
[
bij
]
=
[
uij
xj
]
(2)
where bij denotes the amount of commodity i required to produce a dollar-worth output of industry j, and xj denotes the total amount of industry j
including imports.
The Make matrix—the transposed supply table—denoted as V, provides information on the production of commodities by industries. In this
matrix, the rows show the amount of commodities used by industries, whereas the columns show industries. Using the information given by the V
matrix, the industry-based technology coefficient matrix D (also referred to as market share matrix) can be formed as follows (Miller & Blair, 2009):
D =
[
dij
]
=
[
vij
qi
]
(3)
where vij denotes the value of the output of commodity i by industry j; qi denotes the total output of commodity i, and dij denotes the fraction of
total commodity i’s output produced by industries.
After defining B and D matrixes, an industry-by-industry IO model can be formulated as follows (Miller & Blair, 2009):
x =
[
(I − DB)−1
]
f (4)
where x denotes the total industry output vector, I denotes the identity matrix, DB denotes the direct requirement matrix, and f denotes the total
final demand vector.
Once the IO model is constructed, the LCSA impacts can be estimated by multiplying the final demand of an industry j with the multiplier matrix.
A vector of total LCSA impacts is formulated as follows (Miller & Blair, 2009):
r = Edim x = Edim
[
(I − DB)−1
]
f (5)
where r denotes the total impact vector that gives the estimations of LCSA impacts per unit of final demand, and Edim represents a diagonal matrix,
consisting of LCSA impact values per dollar-worth output of each industry. The multiplier matrix consists of the product of Edim and (I − DB)−1,
values of which are provided in Tables S2–S6 in Supporting Information S1. These multipliers are used to quantify the LCS indicators considered in
the analysis. These LCS indicators are presented in Supporting Information S1 (see Table S1).
2.2 Scope and goal
Life cycle phases such as material extraction, procurement, manufacturing, and operation phases are included in the analysis. Figure 1 shows the
system boundary assumed for the LCSA analyses of diesel A-HDT and BE A-HDT. The vehicle characteristics for the studied HDTs are presented
in Supporting Information S1 (see Table S2). The functional unit of the analysis can be given as a commercial truck manufactured and operated
until its end of lifetime, like in Sen, Ercan, and Tatari (2017). Therefore, the results will be presented on the basis of unit of indicator per truck (e.g.,
GWP100/truck).
2.3 Life cycle inventory
A conventional (diesel) truck is considered the baseline truck, made of the essential truck components such as truck’s body, shell, engine, other
miscellaneous parts, and a trailer. Both electrification and automation of HDTs require the installation of additional parts, and these additional
parts come along with additional costs to the baseline truck manufacturing. The considerations (e.g., fuel prices, refueling stations, and air pollution
costs) regarding the inputs for LCSA are presented in Section S2 of Supporting Information S1 (see Tables S2 and S3).
2.4 Sensitivity analysis
In addition to vehicle characteristics, the life cycle sustainability impacts of HDTs are also significantly dependent on their usage, that is, annual
mileage and lifetime. Given different plausible sources that report different values for these two variables, a sensitivity analysis was performed to
primarily determine how a variation from −10% to 10% in the values of these variables would influence the selected LCS indicators.
7. SEN ET AL. 155
3 RESULTS
The analysis results with regard to mineral resource scarcity impacts, fossil resource scarcity impacts, particulate matter formation potential, pho-
tochemical oxidant formation potential, fatal and nonfatal injuries, and tax are given both in Sections 3.2 and 3.3 and presented in Supporting
Information S1 as well.
3.1 Environmental impacts
Life cycle water footprints (WFs) of diesel A-HDT and BE A-HDT have been estimated to amount to 116 thousand cubic meters and 72 thousand
cubic meters, respectively. Fuel consumption is the primary contributor to the total WF of a diesel A-HDT, being responsible for over 70% of the
total WF, whereas it represents slightly less than 20% of the total WF of BE A-HDT (see Figure 2). The main driver of BE A-HDT’s total WF is the
FIGURE 2 Environmental impact results of the LCSA per truck: Total water footprint (thousand m3) and Global warming potential (metric ton
CO2-eq.)
Note. Underlying data used to create this figure can be found in Supporting Information S2.
truck manufacturing (more than 45%) due to the manufacturing of battery and incremental parts such as glider and power electronics, causing
more than half of this impact. Overall, these values translate into a water intensity of 0.044 m3 per mile for a diesel A-HDT and 0.027 m3 per mile
for a BE A-HTD; and an energy intensity of 7.75 MJ per mile for a diesel A-HDT and 10.4 MJ per mile for a BE A-HDT.
Global warming potential (GWP) of diesel A-HDT is estimated to be 11.6 thousand metric tons CO2-eq.; 4.7 thousand-metric tons CO2-eq.
higher than that of BE A-HDT. As shown in Figure 2, almost 90% of diesel A-HDT’s GWP is driven by tailpipe emissions (65%) and fuel con-
sumption (23.5%), whereas the contributors to BE A-HDT’s GWP are fuel production, representing 35% of the GWP, followed by BE truck man-
ufacturing, accounting for 28%. Battery-related activities, that is, manufacturing and replacement, have been found to cause 30% of a BE A-
HDT. A diesel A-HDT and a BE A-HDT have been found to reduce GHG emissions by 10% and over 60%, respectively, relative to a conven-
tional HDT. Nahlik et al. (2015) found similar results, reporting that switching to hybrid or LNG truck technologies could reduce GHG emissions
by 5% and 9%, respectively. The difference between the numbers may well be attributed to automation given the expected increase in driving
efficiency.
3.2 Social impacts
As shown in Figure 3, BE A-HDT generates more employment than its diesel counterpart. Maintenance and repair, and fuel production related
activities make the major contributions to the employment rate from a diesel A-HDT, accounting for 47% and 35% of the total employment,
respectively.
While 14% of a diesel A-HDT’s employment rate is attributable to truck manufacturing, it accounts for almost 20% of a BE A-HDT’s employment
rate given the manufacturing of additional parts. Maintenance and repair-related activities represent almost 40% of a BE A-HDT’s employment
rate, followed by truck manufacturing related activities (18%).
8. 156 SEN ET AL.
FIGURE 3 Social impact results of the LCSA per truck: Employment (person) and Human Health Impact (DALY)
Note. The underlying data used to create this figure can be found in Supporting Information S2.
As shown in Figure 4, income is generated largely through activities related to fuel production (39%), M&R (40%), and truck manufacturing
(14%) for diesel A-HDT. The results show a more diverse distribution of income generation for BE A-HDT, with truck manufacturing (21%) and fuel
production (22%) related activities having the two largest shares owing to additional parts required for BE A-HDT. The income from M&R related
activities represents 25% of the total income generated by a BE A-HDT. Last, the human health impact (HHI) of diesel A-HDT is estimated to be 11
FIGURE 4 Particulate matter formation potential (metric ton PM10-eq.), photochemical oxidant formation potential (metric ton VOC-eq.),
mineral resource scarcity (metric ton Cu-eq.); fatal injuries (person) and nonfatal injuries (thousand persons); Income ($M)
Note. “Mnfg.” stands for manufacturing and the underlying data used to create this figure can be found in Supporting Information S2.
9. SEN ET AL. 157
DALY—four units higher than that of BE A-HDT. Tailpipe emissions are the primary cause of this impact, accounting for 65% of diesel HDT’s HHI
total. The estimates show that the manufacturing of additional parts, including battery manufacturing and replacement, is responsible for almost
35% of the total HHI caused by BE A-HDT.
3.3 Economic impacts
The total import of goods and services used for a diesel A-HDT is estimated to amount to slightly less than $1 M—almost four times higher than that
of a BE A-HDT. The results, as provided in Figure 5, show that over 85% of this import is associated with fuel production, while imports related to
power generation represent only 12% of the total imports caused by a BE A-HDT. This finding is consistent with several others such as Larson, Elias,
and Viafara (2013), Pontau et al. (2015), U.S. Environmental Protection Agency (2015), and Goldin, Erickson, Natarajan, Brase, and Pahwa (2014),
confirming the U.S. dependence on foreign oil. The largest import item for a BE A-HDT is the manufacturing of additional parts (including battery),
accounting for almost 35% of the imports, followed by the imports associated with M&R activities (26.5%). Gross operating surplus (GOS) and gross
domestic product (GDP) indicators show an identical pattern for both truck types, with fuel production and M&R related activities generating the
major share of the GOS and GDP, as shown in Figure 5.
FIGURE 5 Economic impact results of the LCSA per truck: Import ($K), gross domestic product ($M), gross operating surplus ($M)
Note. The underlying data used to create this figure can be found in Supporting Information S2.
As presented in Figure 6, the total health impact cost (or the cost of air pollution) of a BE A-HDT is almost entirely driven by fuel production
related activities, estimated to be responsible for 90% of this impact category, whereas activities related to fuel production (32%) and fuel com-
bustion (i.e., tailpipe emissions) (65%) are the two major drivers of the total health impact cost of a diesel A-HDT. Hence, a diesel A-HDT causes a
per-mile health cost of $0.14, whereas a BE A-HDT causes a per-mile health cost of $0.10. Based on the cost assumptions considered in the analysis,
the cost of automation-related parts represents a tiny share of 1% of a diesel A-HDT, and 1.2% of a BE A-HDT. The LCC of a diesel A-HDT is largely
driven by the expenditures on fuel, accounting for almost 65% of the total cost, whereas, for a BE A-HDT, life cycle fuel cost (27%), M&R cost (26%),
and battery replacement cost (8%) are found to be the main drivers of the LCC. Hence, a diesel A-HDT’s per-mile cost is estimated to be $0.88,
while a BE A-HDT’s per-mile cost is estimated to be $0.71.
10. 158 SEN ET AL.
FIGURE 6 Life cycle economic impacts: air pollution cost ($M), tax ($K), mineral resource depletion ($), fossil resource depletion ($K), and life
cycle cost ($M)
Note. “Mnfg.” stands for manufacturing and the underlying data used to create this figure can be found in Supporting Information S2.
3.4 Sensitivity analysis results
As shown in Figure 7, the results have shown that the life cycle sustainability impacts of the studied HDTs are sensitive to the variations in assuming
values for truck’s annual mileage and lifetime, which were entered as input variables for the sensitivity analysis. The analysis has also revealed
parameters other than annual mileage and lifetime, to which the life cycle sustainability impacts are sensitive as well, even though such variables
were not considered in the sensitivity analysis as variables. In this regard, HDT’s fuel economy has been observed to influence various impact
categories to an important extent. For example, a 10% increase in diesel A-HDT’s fuel economy results in 600 metric tons of CO2-eq. emission
reduction and brings imports down to below $880K per HDT, and the LCC of diesel A-HDT down to below $2.2 M.
Similarly, the sensitivity analysis for BE A-HDT was initially run for two variables, that is, annual mileage and lifetime. However, the software
(Frontline Systems’s (2019) Analytic Solver) used to carry out the sensitivity analysis revealed battery capacity and fuel economy as other primary
variables that influence the results. Therefore, these parameters were also included in the sensitivity analysis.
11. SEN ET AL. 159
FIGURE 7 Sensitivity analysis results for (a) diesel A-HDT and (b) BE A-HDT
Note. Underlying data used to create this figure can be found in Supporting Information S2.
Accordingly, annual mileage, which is an indication of vehicle usage, has been observed to bring the greatest improvement in the global warming
potential and human health impact categories for BE A-HDT, as shown in Figure 7. As for the LCC of BE A-HDT, lifetime has been observed to bring
the highest variation, as expected.
4 CONCLUSION AND DISCUSSION
Automating HDTs is certainly a multifaceted, multidimensional task, necessitating the involvement of multiple stakeholders in developing, commer-
cializing, and regulating the technology. Hence, focusing solely on one aspect or one dimension of the sustainability implications of the technology
may mislead stakeholders involved in decision- and policymaking. To that end, the application of an input–output based LCSA has been found useful
for quantifying and encompassing several aspects and three dimensions of sustainability of automated and electrified HDTs. However, it should still
be noted that the analysis carried out based on a different IO database, for example, EXIOBASE, WIOD, or GTAP, would have likely shown some
discrepancies in the results, as revealed in the studies such as Eisenmenger et al. (2016) and Moran and Wood (2014). There may be several reasons
such as different approaches taken to construct an IO data, different standards used by countries to publish relevant data, and variation in sectoral
resolution, that explain such a discrepancy between results obtained from using different databases (Wood, Hawkins, Hertwich, & Tukker, 2014).
Almost all the considered aspects of the environmental dimension have been improved through automation and electrification, with the excep-
tion of mineral resource scarcity, which is a crucial point given the growing demand for minerals around the world (Ali et al., 2017). The improvement
in mineral intensity brought by an automated diesel HDT is small, and an automated and electrified HDT increases mineral intensity significantly
due to battery manufacturing. Activities associated with battery are an important driver of life cycle sustainability (LCS) impacts for BE HDTs. In
fact, the sensitivity analysis results have shown that battery capacity has indeed remarkable impact on LCSA results. Therefore, battery technol-
ogy is a significant factor to be considered in assessing sustainability impacts of HDTs. Given the method used in the analysis, the impact of battery
technology and battery chemistry, for example, Li-ion, NiMH, and lithium polymer, would have been more visible, had an EIO-based LCSA method
hybridized with process-based LCA for battery’s impacts been used to analyze the LCS impacts of the studied vehicles.
12. 160 SEN ET AL.
The same holds true for energy intensity, which decreases through automation, but increases due to the prevailing way of power generation
when an automated HDT is electrified. This means that, while automation is likely to lead to a decreased global warming potential of HDTs, it
may result in an increase in the global warming potential of power generation, which may outweigh the benefits gained through automation in
HDTs. The validation of the results can be better realized as more studies that examine the life cycle impacts of connected autonomous trucks
are carried out. However, to the authors’ best knowledge, there is no study that has investigated the LCSI of autonomous trucks. Therefore, it is
difficult to make an “apple-to-apple” comparison of this study’s results with those of another study. Nonetheless, some examples can be given. A
diesel A-HDT and a BE A-HDT have been found to reduce GHG emissions by 10% and over 60%, respectively, relative to a conventional HDT. Nahlik
et al. (2015) reported similar results. They found that switching to hybrid or LNG truck technologies could reduce GHG emissions by 5% and 9%,
respectively. The difference between the numbers may well be attributed to automation given the expected increase in driving efficiency. The LCC
results correspond to an average decrease of $7,900 and $36,000 per truck per year in the LCCs of a diesel A-HDT and a BE A-HDT relative to a
conventional HDT, respectively. These results align with Bishop et al. (2015), who reported only the fuel savings from two-diesel truck platooning
to be $14,000 per truck per year.
As brought up by several scholars such as Clements and Kockelman (2017), Heard et al. (2018), and Crayton and Meier (2017), the findings of
this study also show a decline in the rate of employment due to automation of diesel HDTs. BE A-HDT has been observed to increase employment;
however,thisincreaseisnotduetotheautomationbutisattributedtocharginginfrastructure-relatedactivities.TheauthorsagreewithHeardet al.
(2018), stating that the negative effects of the decrease in employment (e.g., physical and mental health (Crayton & Meier, 2017)) must be mitigated
while seeking improvements in the overall sustainability performance. When the HHI due to tailpipe emissions is taken into consideration, the HHI
has been observed to decline by 45% owing to electrification and automation, despite the health impacts of current electricity generation. In case
the HHI due to tailpipe emissions is not taken into account, automation and electrification of HDTs have been observed to increase the risk on
public health due to the indirect health impact of power generation. An analysis of an alternative power generation scenario, for example, power
generation from renewable energy resources, is out of the scope of this study. However, as also concluded in a previous study carried out by the
authors (Sen et al., 2017), the power generation phase is an important driver of heavy-duty truck electrification. Therefore, if the power used to
propel a BE HDT is generated from a sustainable energy resource or an environmentally friendly grid mix, the impact profile of this truck type is
likely to be positively different.
On the economic front, the decreases in the values of gross operating surplus (GOS) and gross domestic product (GDP) may look alarming at
first glance. However, the gains through the decreased import of materials—especially oil—as well as decreased cost of air pollution outweigh the
loss resulting from decreased GOS and GDP combined. Fuel economy is a significant determinant for many aspects of sustainable HDTs. Therefore,
interpreting the impacts of HDT automation on imports by focusing only on fuel may lead to overlooking the impacts of other system components.
To this end, when fuel is removed from the picture, the impact of truck manufacturing, maintenance, and repair can be better. In this regard, applica-
tion of sustainable design practices, for example, switching to light-weight materials, as suggested by Center for Automotive Research (2015), may
further decrease the cost burden of imports going into automated HDTs. Such an application may have implications beyond imports by improving
the mineral intensity of HDTs, which changes negligibly through automation but increases due to automation and electrification. Overall, given fuel
economy’s significant role in the LCS impact of HDTs, the behavior of consumers and the market, and possible rebound effects that are likely to
come along with automation, should all come under scrutiny.
5 LIMITATIONS AND FUTURE REMARKS
Several limitations exist due to the infancy of the technology and the lack of data associated with it on some important considerations. An important
limitation arises from the year (i.e., 2015) of the IO tables used. CAV technology is a rapidly emerging technology that bears a certain level of
uncertainty especially with regard to vehicle operation, including maintenance and fuel consumption, which are important considerations when
making a vehicle purchase decision. In case of a large deployment of A-HDTs, the cost and technology structure of the industries included in IO
tablesmaywellchange,leadingtodifferentresults.Therefore,theestimatedLCSimpactsarelimitedonlytotheindustrystructureoftheyear2015.
As stated by Greenblatt and Shaheen (2015), several other environmental impacts are worth investigating such as land use change (e.g., how the
introduction of A-HDTs will affect roadway capacity) and impacts on biodiversity (e.g., urban ecosystems). The results were limited to the reported
LCSA indicators due to lack of data in this respect. In addition, as applied in Onat, Kucukvar, and Tatari (2016), a multivariate uncertainty analysis
can be applied to estimate the likelihood of impact reduction potentials of other truck technologies (e.g. compressed natural gas-powered truck,
hybrid electric truck, etc.).
Since the automated HDTs are likely to require a new set of skills for their maintenance and repair, a new industry (or industries), with its own
price and technology structure, may be born, which could not be included in the analysis as existing IO databases, including the Eora database, do
not currently contain data on such an industry (or industries). As stated by Miller and Blair (2009), impacts associated with the introduction of a new
industry into a regional or a national economy is possible within the IO modeling framework. In order to be able to assess such impacts, estimation
of the input coefficients for the new sector, that is, inputs from all other sectors per dollar output of the new sector, is required. However, the lack
13. SEN ET AL. 161
of data in this regard did not make it possible for this study to report the impact of the introduction of a potential new sector. Similarly, since the
Eora database does not have data on the PM2.5 emissions, the sustainability impacts of this pollutant could not be reported. However, the authors
acknowledge that PM2.5 is an air pollutant that has significant public health implications. Another aspect that was left out of the scope is the end
of life of the studied automated trucks. Given more data availability, the authors will attempt to include this phase as well and report a truck’s
cradle-to-grave life cycle sustainability impacts.
The impact of CAV technology on employment should be further scrutinized. The IO modeling framework alone does not provide means to
identify the driving factors of impacts on employment. Structural decomposition analysis (SDA) could be applied to identify the factors that caused
the reported decrease in employment, and analyze how employment related to transporting goods (i.e., truck drivers) is affected by the introduction
of the technology. Such an analysis will be applied in a follow-up study, which will employ a dynamic multiregional IO modeling. However, its impact
on the overall employment was put under the spotlight, which is still an important insight provided by the study. Furthermore, while the CAV
technology’s impact on the employment of truck drivers is an important point of discussion regarding the adoption of autonomous trucks among
researchers. American Trucking Association stated that the impact of driver-assist automation technologies in HDTs may have a positive impact on
the driver shortage experienced by the industry (Costello, 2017). Similarly, a recent report published by Viscelli (2018) concluded that, while the
jobs that might be lost to automated HDTs could reach 300,000, there would be enough jobs to replace the displaced drivers thanks to the growth
of e-commerce and significance of local delivery. The results of this study reported with respect to employment align with these viewpoints to a
certain extent.
Another important aspect that has been left out but will be scrutinized in a future study is the examination of likely LCS profiles of autonomous
vehicles under potential renewable energy transition scenarios. To increase the benefits of this research or similar ones focusing on emerging
technologies in transportation, the implications of the social impacts from a public policy perspective should be further investigated. However, the
authors humbly believe that any aspect that improves the public’s standards of living, starting from human health, should be prioritized.
Furthermore, as also mentioned above, the authors have encountered some difficulties in assessing some of these impacts more thoroughly
given methodological and data limitations. It is also quite difficult to make a scientific inference regarding the changes in the sustainability impacts
overall in the future, given the pace of technological developments as well as the level of uncertainty in the on-going transformation in transporta-
tion. Nevertheless, the authors expect a rapid change toward automation and connectivity, particularly in surface transportation. The budgetary
actions realized both by governments and by automotive industry giants are a good indication of this tendency. Remarkable improvements may
be expected in the sustainability performance of HDTs; however, there are always questions that remain problematic such as how the demand for
transportation will evolve, which will have an important influence on the likely future.
Another aspect that may be considered a limitation is that other fuel technologies such as compressed natural gas (CNG)-powered HDTs have
not been included in the analysis. There are three main reasons that explain this exclusion. First, a previous study carried out by the authors on the
life cycle analysis of alternative fuel-powered Class 8 heavy-duty vehicles showed that CNG trucks remarkably underperform BE trucks, and only
slightly outperform diesel trucks (Sen et al., 2017). Second, a recent study conducted by the authors has investigated what an optimal sustainable
heavy-duty truck fleet would look like given decisions based on the robust optimal solution (Sen, Ercan, Tatari, & Zheng, 2018). The results of the
study have shown that, given the technological and economic circumstances of the year of that study (i.e., 2017), the fleets composed by each stud-
ied sector are comprised mostly of diesel trucks, hybrid electric trucks, and battery electric trucks. Last, the transforming transportation system is
planned to be fully autonomous and connected. Such a smart concept for vehicles of the future is deemed to be generally inherently attributed to
the use of electricity, which may be due to a realization that fossil fuels cannot be a smart choice.
CONFLICT OF INTEREST
The authors declare no conflict of interest.
ORCID
Burak Sen https://orcid.org/0000-0003-2454-9287
Murat Kucukvar https://orcid.org/0000-0002-4101-2628
Nuri C. Onat https://orcid.org/0000-0002-0263-5144
Omer Tatari https://orcid.org/0000-0002-8150-992X
REFERENCES
Alessandrini, A., Campagna, A., Site, P. D., Filippi, F., & Persia, L. (2015). Automated vehicles and the rethinking of mobility and cities. Transportation Research
Procedia, 5, 145–160. http://doi.org/10.1016/j.trpro.2015.01.002
Ali, S. H., Giurco, D., Arndt, N., Nickless, E., Brown, G., Demetriades, A., … Yakovleva, N. (2017). Mineral supply for sustainable development requires resource
governance. Nature, 543(7645), 367–372. Retrieved from http://www.nature.com/articles/nature21359
14. 162 SEN ET AL.
Barth, M., Boriboonsomsin, K., & Wu, G. (2014). Vehicle automation and its potential impacts on energy and emissions. In G. Meyer & S. Beiker (Eds.), Road
vehicle automation (pp. 103–112). Berlin, Germany: Springer. Retrieved from http://link.springer.com/10.1007/978-3-319-05990-7
Bechtsis, D., Tsolakis, N., Vlachos, D., & Iakovou, E. (2017). Sustainable supply chain management in the digitalisation era: The impact of automated guided
vehicles. Journal of Cleaner Production, 142, 3970–3984. https://doi.org/10.1016/j.jclepro.2016.10.057.
Beer, T., Grant, T., Williams, D., & Watson, H. (2002). Fuel-cycle greenhouse gas emissions from alternative fuels in Australian heavy vehicles. Atmospheric
Environment, 36, 753–763. Retrieved from https://ac.els-cdn.com/S1352231001005143/1-s2.0-S1352231001005143-main.pdf?_tid=952dde66-2ad5-
488a-bce4-1cfd27ffedb3&acdnat=1544542626_0c09fb85981741403823cc4b0741a3ae
Bishop, R., Bowman, D., Boyd, S., Drinkard, D., Kailas, A., Korn, A., … Williams, D. (2015). White paper: Automated driving & platooning—Issues and opportunities
(pp. 1–48). Arlington, VA: Future Truck Program, Automated Driving and Platooning Task Force, ATA Technology and Maintenance Council. Retrieved
from http://orfe.princeton.edu/~alaink/SmartDrivingCars/ITFVHA15/ITFVHA15_USA_FutureTruck_ADP_TF_WhitePaper_Draft_Final_TF_Approved_
Sept_2015.pdf
Bösch, P. M., Becker, F., Becker, H., & Axhausen, K. W. (2018). Cost-based analysis of autonomous mobility services. Transport Policy, 64, 76–91.
Center for Automotive Research. (2015). Contribution of the automotive industry to the economies of all fifty states and the United States. Retrieved from
http://www.autoalliance.org/files/dmfile/2015-Auto-Industry-Jobs-Report.pdf
Center for Transportation Research. (2016). GREET life-cycle model user guide. Retrieved from https://greet.es.anl.gov/index.php?content=greetdotnet
Clements, L. M., & Kockelman, K. M. (2017). Economic effects of automated vehicles. Transportation Research Record, 2602, 1–19. Retrieved from
http://www.caee.utexas.edu/prof/kockelman/public_html/TRB17EconomicEffectsofAVs.pdf
Clift, R., & Druckman, A. (2016). Taking stock of industrial ecology. Cham, Switzerland: Springer International Publishing.
Collingwood, L. (2018). Autonomous trucks: An affront to masculinity? Information and Communications Technology Law, 27(2), 251–265.
Costello, B. (2017). Truck driver shortage analysis 2017. Retrieved from http://progressive2.acs.playstream.com/truckline/progressive/ATAsDriverShortage
Report2017.pdf
Crayton, T. J., & Meier, B. M. (2017). Autonomous vehicles: Developing a public health research agenda to frame the future of transportation policy. Jour-
nal of Transport & Health, 6, 245–252. Retrieved from https://ac.els-cdn.com/S2214140517300014/1-s2.0-S2214140517300014-main.pdf?_tid=spdf-
acb7a2d1-8b67-4b05-99e0-18e694fb6a10&acdnat=1519776892_2fbc9472c09b662681da37f67ef5c1aa
Cucurachi, S., van der Giesen, C., & Guinée, J. (2018). Ex-ante LCA of emerging technologies. Procedia CIRP, 69, 463–468. Retrieved from https://www.
sciencedirect.com/science/article/pii/S2212827117307722
Eisenmenger, N., Wiedenhofer, D., Schaffartzik, A., Giljum, S., Bruckner, M., Schandl, H., … Koning, A. (2016). Consumption-based material flow indicators—
Comparing six ways of calculating the Austrian raw material consumption providing six results. Retrieved from https://ac.els-cdn.com/S0921800916302798/
1-s2.0-S0921800916302798-main.pdf?_tid=b7ac9848-0058-11e8-b19e-00000aab0f02&acdnat=1516724347_e90168e57cab12d35059d65cb3824
856
Eurostat. (2008). Eurostat manual of supply, use and input-output tables. Retrieved from http://ec.europa.eu/eurostat/documents/3859598/5902113/KS-RA-
07-013-EN.PDF/b0b3d71e-3930-4442-94be-70b36cea9b39?version=1.0
Finkbeiner, M., Schau, E. M., Lehmann, A., & Traverso, M. (2010). Towards life cycle sustainability assessment. Sustainability, 2(10), 3309–3322. Retrieved
from http://www.mdpi.com/2071-1050/2/10/3309
Fitzpatrick, D., Cordahi, G., O’Rourke, L., Ross, C., Kumar, A., & Bevly, D. (2017). Challenges to CV and AV applications in truck freight operations. Retrieved from
https://www.nap.edu/catalog/24771
Foran, B., Lenzen, M., Dey, C., & Bilek, M. (2005). Integrating sustainable chain management with triple bottom line accounting. Ecological Economics, 52(2),
143–157.
Frontline Systems. (2019). Excel Solver, Optimization Software, Monte Carlo Simulation, Data Mining. Retrieved from https://www.solver.com/
Fry, J., Lenzen, M., Jin, Y., Wakiyama, T., Baynes, T., Wiedmann, T., … Schandl, H. (2018). Assessing carbon footprints of cities under limited information. Journal
of Cleaner Production, 176, 1254–1270. Retrieved from https://www.sciencedirect.com/science/article/pii/S0959652617327336
Gaines, L., Stodolsky, F., Cuenca, R., & Eberhardt, J. (1998, June). Life-cycle analysis for heavy vehicles. Paper presented at the Air & Waste Management Asso-
ciation Annual Meeting, San Diego, CA.
Gloria, T., Guinée, J., Kua, H. W., Singh, B., & Lifset, R. (2017). Charting the future of life cycle sustainability assessment: A special issue. Journal of Industrial
Ecology, 21(6), 1449–1453. Retrieved from http://doi.org/10.1111/jiec.12711
Goldin, E., Erickson, L., Natarajan, B., Brase, G., & Pahwa, A. (2014). Solar powered charge stations for electric vehicles. Environmental Progress & Sustainable
Energy, 33(4), 1298–1308. Retrieved from http://onlinelibrary.wiley.com/doi/10.1002/ep.11898/abstract
Graham, L. A., Rideout, G., Rosenblatt, D., & Hendren, J. (2008). Greenhouse gas emissions from heavy-duty vehicles. Atmospheric Environment, 42(19), 4665–
4681.
Greenblatt, J. B., & Shaheen, S. (2015). Automated vehicles, on-demand mobility, and environmental impacts. Current Sustainable/Renewable Energy Reports,
2(3), 74–81. Retrieved from http://link.springer.com/10.1007/s40518-015-0038-5
Gruel, W., & Stanford, J. M. (2016). Assessing the long-term effects of autonomous vehicles: A speculative approach. Transportation Research Procedia, 13,
18–29. https://doi.org/10.1016/j.trpro.2016.05.003.
Guinée, J. (2016). Life cycle sustainability assessment: What is it and what are its challenges? In R. Clift & A. Druckman (Eds.), Taking stock of industrial ecology
(pp. 45–68), Cham, Switzerland: Springer International Publishing. https://doi.org/10.1007/978-3-319-20571-7_3
Guinée, J. B., Heijungs, R., Huppes, G., Zamagni, A., Masoni, P., Buonamici, R., … Rydberg, T. (2011). Life cycle assessment: Past, present, and future. Environ-
mental Science & Technology, 45, 90–96. Retrieved from https://pubs.acs.org/sharingguidelines
Harper, C. D., Hendrickson, C. T., & Samaras, C. (2016). Cost and benefit estimates of partially-automated vehicle collision avoidance technologies. Accident
Analysis and Prevention, 95, 104–115. https://doi.org/10.1016/j.aap.2016.06.017.
Heard, B. R., Taiebat, M., Xu, M., & Miller, S. A. (2018). Sustainability implications of connected and autonomous vehicles for the food supply chain. Resources,
Conservation and Recycling, 128, 22–24. https://doi.org/10.1016/j.resconrec.2017.09.021.
International Transport Forum. (2017). Managing the transition to driverless road freight transport (Case-Specific Policy Analysis Report). Paris, France:
OECD/ITF.
Jeswani, H. K., Azapagic, A., Schepelmann, P., & Ritthoff, M. (2010). Options for broadening and deepening the LCA approaches. Journal of Cleaner Production,
18(2), 120–127.
15. SEN ET AL. 163
Kloepffer, W. (2008). Life cycle sustainability assessment of products. International Journal of Life Cycle Assessment, 13(2), 89–95. http://doi.org/
10.1065/lca2008.02.376
Kucukvar, M. (2013). Life cycle sustainability assessment framework for the U.S. built environment. Orlando, FL: University of Central Florida. Retrieved from
http://library.ucf.edu
Kucukvar, M., Noori, M., Egilmez, G., & Tatari, O. (2014). Stochastic decision modeling for sustainable pavement designs. International Journal of Life Cycle
Assessment, 19(6), 1185–1199. Retrieved from http://link.springer.com/10.1007/s11367-014-0723-4
Kucukvar, M., & Tatari, O. (2013). Towards a triple bottom-line sustainability assessment of the U.S. construction industry. International Journal of Life Cycle
Assessment, 18(5), 958–972. Retrieved from https://link.springer.com/content/pdf/10.1007%2Fs11367-013-0545-9.pdf
Larson, P. D., Elias, A., & Viafara, J. (2013). Toward sustainable trucking: Reducing emissions and fuel consumption. Transportation Journal, 52(1), 108–120.
Retrieved from https://www.jstor.org/stable/pdf/10.5325/transportationj.52.1.0108.pdf
Lenzen, M., Kanemoto, K., Moran, D., & Geschke, A. (2012a). Mapping the structure of the world economy. Environmental Science & Technology, 46(15), 8374–
8381.
Lenzen, M., Kanemoto, K., Moran, D., & Geschke, A. (2012b). Eora global MRIO. Retrieved from http://www.worldmrio.com
Lenzen, M., Moran, D., Kanemotos, K., & Geschke, A. (2013). Building EORA: A global multi-region input–output database at high country and
sector resolution. Economic Systems Research, 25(1), 20–49. Retrieved from http://www.tandfonline.com/action/journalInformation?journalCode=
cesr20
Leontief, W. (1970). Environmental repercussions and the economic structure: An input–output approach. Review of Economics and Statistics, 52(3), 262–271.
Retrieved from http://www.jstor.org/stable/1926294
Lifset, R., & Graedel, T. E. (2002). Industrial ecology: Goals and definitions. In R. U. Ayres & L. W. Ayres (Eds.), A handbook of industrial ecology (pp. 3–15).
Cheltenham, UK: Edward Elgar Publishing Limited.
Meersman, H., Ehrler, V. C., Bruckmann, D., Chen, M., Francke, J., Hill, P., … Vierth, I. (2016). Challenges and future research needs towards international
freight transport modelling. Case Studies on Transport Policy, 4(1), 3–8. https://doi.org/10.1016/j.cstp.2015.12.002.
Meyer, P. E., Green, E. H., Corbett, J. J., Mas, C., & Winebrake, J. J. (2011). Total fuel-cycle analysis of heavy-duty vehicles using biofuels and nat-
ural gas-based alternative fuels. Journal of the Air & Waste Management Association, 61(3), 285–294. Retrieved from https://www.tandfonline.com/
doi/full/10.3155/1047-3289.61.3.285
Miller, R. E., & Blair, P. D. (2009). Input-output analysis: Foundations and extensions (2nd ed.). Cambridge, UK: Cambridge University Press.
Moran, D., & Wood, R. (2014). Convergence between the Eora, WIOD, EXIOBASE, and OpenEU’s consumption-based carbon accounts. Economic Systems
Research, 26(3), 245–261. https://doi.org/10.1080/09535314.2014.935298.
Nahlik, M. J., Kaehr, A. T., Chester, M. V., Horvath, A., & Taptich, M. N. (2015). Goods movement life cycle assessment for greenhouse gas reduction goals.
Journal of Industrial Ecology, 20(2), 317–328.
Onat, N., Kucukvar, M., Halog, A., & Cloutier, S. (2017). Systems thinking for life cycle sustainability assessment: A review of recent developments, applica-
tions, and future perspectives. Sustainability, 9(5), 706. Retrieved from http://www.mdpi.com/2071-1050/9/5/706
Onat, N. C., Kucukvar, M., & Tatari, O. (2014). Towards life cycle sustainability assessment of alternative passenger vehicles. Sustainability, 6(12), 9305–9342.
Retrieved from http://www.mdpi.com/2071-1050/6/12/9305
Onat, N. C., Kucukvar, M., & Tatari, O. (2016). Uncertainty-embedded dynamic life cycle sustainability assessment framework: An ex-ante perspective on the
impacts of alternative vehicle options. Energy, 112, 715–728.
Pontau, P., Hou, Y., Cai, H., Zhen, Y., Jia, X., Chiu, A. S. F., & Xu, M. (2015). Assessing land-use impacts by clean vehicle systems. Resources, Conservation and
Recycling, 95, 112–119.
Rogge, M., van der Hurk, E., Larsen, A., & Sauer, D. U. (2018). Electric bus fleet size and mix problem with optimization of charging infrastructure. Applied
Energy, 211, 282–295. Retrieved from https://www.sciencedirect.com/science/article/pii/S0306261917316355
Ross, C., & Guhathakurta, S. (2017). Autonomous vehicles and energy impacts: A scenario analysis. Energy Procedia, 143, 47–52. https://doi.org/
10.1016/j.egypro.2017.12.646.
Sala, S., Farioli, F., & Zamagni, A. (2013). Life cycle sustainability assessment in the context of sustainability science progress (part 2). International Journal of
Life Cycle Assessment, 18(9), 1686–1697.
Sen, B., Ercan, T., & Tatari, O. (2017). Does a battery-electric truck make a difference? Life cycle emissions, costs, and externality analysis of alternative fuel-
powered Class 8 heavy-duty trucks in the United States. Journal of Cleaner Production, 141, 110–121.
Sen, B., Ercan, T., Tatari, O., & Zheng, Q. P. (2018). Robust Pareto optimal approach for sustainable heavy-duty truck fleet composition. Paper presented at the 98th
Transportation Research Board Annual Meeting, Washington, DC.
Shanker, R., Jonas, A., Devitt, S., Huberty, K., Flannery, S., Greene, W., … Humphrey, A. (2013). Autonomous cars: Self-driving the new auto industry paradigm.
Morgan Stanley Research. Retrieved from https://orfe.princeton.edu/∼alaink/SmartDrivingCars/PDFs/Nov2013MORGAN-STANLEY-BLUE-PAPER-
AUTONOMOUS-CARS%EF%BC%9A-SELF-DRIVING-THE-NEW-AUTO-INDUSTRY-PARADIGM.pdf
Slowik, P., & Sharpe, B. (2018). Automation in the long haul: Challenges and opportunities of autonomous heavy-duty trucking in the United States. Retrieved from
https://www.theicct.org/sites/default/files/publications/Automation_long-haul_WorkingPaper-06_20180328.pdf
To, W. M., & Lee, P. K. C. (2017). A triple bottom line analysis of Hong Kong’s logistics sector. Sustainability, 9(3), 1–10.
Tong, F., Jaramillo, P., & Azevedo, M. L. (2015). Comparison of life cycle greenhouse gases from natural gas pathways for medium and heavy-duty vehicles.
Environmental Science & Technology, 49, 7123–7133.
Tsugawa, S., Jeschke, S., & Shladover, S. E. (2016). A review of truck platooning projects for energy savings. IEEE Transactions on Intelligent Vehicles, 1(1), 68–77.
Retrieved from http://ieeexplore.ieee.org/document/7497531/
U.S. Department of Energy. (2011). Vehicle weight classes and categories. Washington, DC: Author.
U.S. Department of Transportation. (2018). Benefits estimation model for automated vehicle operations: Phase 2 final report. Washington, DC: Author.
U.S. Energy Information Administration. (2017). Study of the potential energy consumption impacts of connected and automated vehicles. Washington, DC: Author.
Retrieved from https://www.eia.gov/analysis/studies/transportation/automated/pdf/automated_vehicles.pdf
U.S. Environmental Protection Agency. (2015). Midterm evaluation of light-duty vehicle greenhouse gas emission standards and corporate average fuel economy
standards for model years 2022–2025 (Draft Technical Assessment Report). Washington, DC: Author
16. 164 SEN ET AL.
Van Meldert, B. & De Boeck, L. (2016). Introducing autonomous vehicles in logistics: A review from a broad perspective (FEB Research Report). Retrieved from
https://lirias.kuleuven.be/bitstream/123456789/543558/1/KBI_1618.pdf
Viscelli, S. (2018). Driverless? Autonomous trucks and the future of the American trucker. Retrieved from http://driverlessreport.org
Wadud, Z., Mackenzie, D., & Leiby, P. (2016). Help or hindrance? The travel, energy and carbon impacts of highly automated vehicles. Transportation Research
Part A, 86, 1–18. Retrieved from https://ac.els-cdn.com/S0965856415002694/1-s2.0-S0965856415002694-main.pdf?_tid=464275e4-98a3-4206-
8401-4668838c945e&acdnat=1520027384_0f8671659251658cb1b64c7ade1aebf8
Wiedmann, T. O., Schandl, H., & Moran, D. (2015). The footprint of using metals: New metrics of consumption and productivity. Environmental Economics and
Policy Studies, 17, 369–388. Retrieved from http://download.springer.com/static/pdf/963/art%253A10.1007%252Fs10018-014-0085-y.pdf?originUrl=
http%3A%2F%2Flink.springer.com%2Farticle%2F10.1007%2Fs10018-014-0085-y&token2=exp=1497291446~acl=%2Fstatic%2Fpdf%2F963%
2Fart%25253A10.1007%25252Fs10018-014-008
Wood, R., Hawkins, T. R., Hertwich, E. G., & Tukker, A. (2014). Harmonising national input–output tables for consumption-based accounting—Experiences
fromEXIOPOL.EconomicSystemsResearch,26(4),387–409.Retrievedfromhttp://www.tandfonline.com/action/journalInformation?journalCode=cesr20
Zamagni, A., Pesonen, H.-L., & Swarr, T. (2013). From LCA to life cycle sustainability assessment: Concept, practice and future directions. International Journal
of Life Cycle Assessment, 18(9), 1637–1641. Retrieved from http://link.springer.com/10.1007/s11367-013-0648-3
SUPPORTING INFORMATION
Additional supporting information may be found online in the Supporting Information section at the end of the article.
How to cite this article: Sen B, Kucukvar M, Onat NC, Tatari O. Life cycle sustainability assessment of autonomous heavy-duty trucks. J Ind
Ecol. 2020;24:149–164. https://doi.org/10.1111/jiec.12964