Peggi Blakley has over 35 years of experience working in electronics rework and repair. She has spent the past 25 years working with the US Navy's 2M program, which provides technical requirements and support for rework and repair of electronics aboard naval vessels. Peggi currently serves as the industry liaison for Naval Surface Warfare Center, Crane and chairs several committees related to electronics assembly and rework standards.
Project Report on SMT and through-hole technologylakshya bhardwaj
SMT and Through-hole technology and their assembly line, different types of Soldering, ESD protection, Conformal coating, etc, all about PCB Production
In Plant training (internship) at Schneider ElectricSujith Js
In Plant Training at Schneider Electric in the department of Manufacturing Technology.
At Jigani, Bangalore.
• Topic: Study and Analysis of manufacturing of PCB.
Introduction to Surface Mount TechnologyABDUL MUNAFF
Surface Mount Technology (SMT) refers to a specific type of electronics assembly where electronic components are attached to the surface of a substrate (typically a printed circuit board).
SMT is a modern alternative to traditional thru-hole technology where components are attached to substrates by leads that passed through holes in the PCB.
Surface Mount components require less space so SMT is helpful in product miniaturization.
SMT Overview
SMT V/S THROUGH HOLE
Basic SMT process flow
Equipments used SMT Assembly
Through Hole Assembly & Soldering
ELECTROSTATIC DISCHARGE
RoHS
PCBA Assembly Process Flow / PCB Assembly Manufacturing introduces the basic manufacturing process of PCBA / PCB assembly in different condition of component.It is about PCBA manufacture production.
This presentation is all about the working of Surface mount technology department of electronics industry. This is my personal experience at iljin electronics pvt. ltd. during my internship.
Project Report on SMT and through-hole technologylakshya bhardwaj
SMT and Through-hole technology and their assembly line, different types of Soldering, ESD protection, Conformal coating, etc, all about PCB Production
In Plant training (internship) at Schneider ElectricSujith Js
In Plant Training at Schneider Electric in the department of Manufacturing Technology.
At Jigani, Bangalore.
• Topic: Study and Analysis of manufacturing of PCB.
Introduction to Surface Mount TechnologyABDUL MUNAFF
Surface Mount Technology (SMT) refers to a specific type of electronics assembly where electronic components are attached to the surface of a substrate (typically a printed circuit board).
SMT is a modern alternative to traditional thru-hole technology where components are attached to substrates by leads that passed through holes in the PCB.
Surface Mount components require less space so SMT is helpful in product miniaturization.
SMT Overview
SMT V/S THROUGH HOLE
Basic SMT process flow
Equipments used SMT Assembly
Through Hole Assembly & Soldering
ELECTROSTATIC DISCHARGE
RoHS
PCBA Assembly Process Flow / PCB Assembly Manufacturing introduces the basic manufacturing process of PCBA / PCB assembly in different condition of component.It is about PCBA manufacture production.
This presentation is all about the working of Surface mount technology department of electronics industry. This is my personal experience at iljin electronics pvt. ltd. during my internship.
PCB Production Introduction /How to Make PCB will separated with 3 parts to introduce about printed circuit boards PCB basic, different PCB types, PCB material, PCB sheet, PCB production process, main PCB manufacturing process include PCB drilling, plated through hole, dry film,PCB etching, solder mask, different PCB surface finishing and so on...
J-STD-001, IPC A-610 F to G Differences WebinarBob Wettermann
BEST presented on the recent updates to IPC-A-610 and IPC J-STD-001. This slide deck was put together by the BEST staff and present as the differences between "F" and "G" webinar series.
LED, BGA, and QFN Inspection - X-Ray Inspection for SMT Quality Assurance and...Bill Cardoso
In this presentation we will cover the manufacturing of the most challenging surface mount parts to assemble and inspect today: LEDs, BGAs, and QFNs. The presentation will focus on the pitfalls of manufacturing and inspecting PCBs with these devices and solution to the technical challenges encountered by luminaire integrators and contract manufacturers. This presentation is targeted at manufacturing, process, and quality personnel responsible for designing; implementing and/or controlling the surface mount device application and inspection process. Those personnel responsible for training operators and technicians to perform assembly inspection or control the manufacturing process would also benefit from this presentation.
We provide totally solution for LED lighting SMT PCB assembly.
Worldwide Installation and on site support.
Factory (machine and lighting assembly) training.
Step by step guide which will help to understand the PCB fabrication process. PCB manufacturing and assembly must be conducted in a clean environment that is free of contaminants. This is important to produce good quality boards that offer unfailing service for years.
This training is very necessary to them who are working in Electronics manufacturing because Soldering process is the Heart of Electronics Industry, that's why this training is very important to employees.
PCB Production Introduction /How to Make PCB will separated with 3 parts to introduce about printed circuit boards PCB basic, different PCB types, PCB material, PCB sheet, PCB production process, main PCB manufacturing process include PCB drilling, plated through hole, dry film,PCB etching, solder mask, different PCB surface finishing and so on...
J-STD-001, IPC A-610 F to G Differences WebinarBob Wettermann
BEST presented on the recent updates to IPC-A-610 and IPC J-STD-001. This slide deck was put together by the BEST staff and present as the differences between "F" and "G" webinar series.
LED, BGA, and QFN Inspection - X-Ray Inspection for SMT Quality Assurance and...Bill Cardoso
In this presentation we will cover the manufacturing of the most challenging surface mount parts to assemble and inspect today: LEDs, BGAs, and QFNs. The presentation will focus on the pitfalls of manufacturing and inspecting PCBs with these devices and solution to the technical challenges encountered by luminaire integrators and contract manufacturers. This presentation is targeted at manufacturing, process, and quality personnel responsible for designing; implementing and/or controlling the surface mount device application and inspection process. Those personnel responsible for training operators and technicians to perform assembly inspection or control the manufacturing process would also benefit from this presentation.
We provide totally solution for LED lighting SMT PCB assembly.
Worldwide Installation and on site support.
Factory (machine and lighting assembly) training.
Step by step guide which will help to understand the PCB fabrication process. PCB manufacturing and assembly must be conducted in a clean environment that is free of contaminants. This is important to produce good quality boards that offer unfailing service for years.
This training is very necessary to them who are working in Electronics manufacturing because Soldering process is the Heart of Electronics Industry, that's why this training is very important to employees.
Selection and Economics for Test Fixtures and Test InterconnectGreg Crouch
PXI-based automated test systems require well-engineered product interconnectivity and fixturing to the device under test to ensure signal integrity and tester longevity. Explore methods and trade-offs in the engineering, selection, and fabrication of the device interface connectivity required for today's complex electronics.
https://www.hitechpcba.com
PCBA testing refers to the test of electrical conductivity and input-output value based on PCBA board with electronic components.
PCBA SMT processing is very complicated and includes multiple important processes, such as PCB board manufacturing process, component procurement and inspection, SMT assembly, DIP, and PCBA testing. Among them, PCBA testing is the most critical quality control step in the entire PCBA processing process. The testing determines the final performance of the product.
Are you IEC61439 ready?
Compliance with the new standard will be compulsory once this standard supersede AS/NZS 3439 series. All assemblies must be shown to meet minimum safety and performance standards by design and routine verification. Many of the alternatives to type testing rely on interpolation from a tested reference design.
Sheet1WBSTask Name1Product development1.1 Electronics1.1.1 PCB design 1.1.2 Component selection1.1.3 P1 circuit design improvements1.1.4 P1 electronics verification tests1.1.5 P2 circuit design improvements1.1.6 P2 electronics verification tests1.1.7 Thermal verification tests 1.1.8 EMC verification tests 1.2 Software 1.2.1 Software specifications and design 1.2.2 User interface additions 1.2.3 Data storage additions 1.2.4 Device to PC protocol additions 1.2.5 PC software additions 1.2.6 R1 release creation 1.2.7 R1 release tests 1.2.8 R1 error correction and user interface improvements 1.2.9 R2 release creation 1.2.10 R2 release tests 1.2.11 R2 error corrections 1.2.12 R2 interoperability tests 1.2.13 R2 interoperability error correction 1.2.14 R3 release creation 1.2.15 R3 release tests 1.2.16 R4 sales release creation 1.3 Mechanics 1.3.1 Industrial design 1.3.2 PCB outline modifications 1.3.3 P1 mechanical CAD design 1.3.4 Tolerance stack analysis 1.3.5 P1 mechanical part analysis 1.3.6 P2 mechanical part modifications 1.3.7 Mechanical tool approval 1.4 Verification 1.4.1 Test plan creation 1.4.2 Component tests 1.4.3 Module tests 1.4.4 System integration tests 1.4.5 Product validation tests 1.4.6 Technical Construction File compilation 1.4.7 Type approval and regulatory approval tests 1.5 P1 Production1.5.1 P1 component lead-time1.5.2 P1 PCB manufacture and delivery1.5.3 P1 mechanical part lead-time1.5.4 P1 assembly and production test preparation1.5.5 P1 prototype build 1.6 P2 Production1.6.1 P2 component lead-time1.6.2 P2 PCB manufacture and delivery1.6.3 P2 mechanical part lead-time1.6.4 P2 assembly and production test preparation1.6.5 P2 prototype build 1.7 Documentation1.7.1 Creation of a user manual1.8 Production ramp up to 50 units1.9 Milestones1.9.1 M1 Concept review complete1.9.2 M2 Design review complete 1.9.3 P1 proto build start 1.9.4 P2 proto build start 1.9.5 M3 Final Design review complete 1.9.6 M4 Launch review 1.9.7Additional milestone - Par A question 4. a)11/27/141.9.8Additional milestone - Par A question 4. b)2/24/15*tasks have to be autoscheduled and numbering has to be auto generated
Sheet2
Sheet3
example PM/EXAMPLE - Xyzzy_Part_A.mpp
example PM/EXAMPLE - Xyzzy_Part_B.mpp
example PM/EXAMPLE - Xyzzy_Part_C.mpp
example PM/Assessment item -PM - instructions EXAMPLE.docx
Introduction and Student Guide
This assessment item is to be completed individually.
The case study simulates a project management scenario where the student takes on the role of project manager. The case information is not complete so where necessary students will have to make assumptions and argue the pros and cons for any recommendations they make.
If n.
API 570 Piping and Pipeline Inspectors Preparatory CoursepetroEDGE
This program is designed for in depth understanding of Inspection of piping and pipelines under operation and in-service as per API 570. This preparatory course will prepare inspectors to ensure piping and pipeline integrity in service. Practical aspect of design considerations, sizing, rating, piping and pipeline integrity, internal inspections, analysis, repair, pressure testing, and pipeline protection shall be discussed. The program shall also provide more information about types of piping system defects which may crop in during operation, repairs, maintenance and alteration. This will lead the participants to prepare them for ensuring good quality and safety of operating piping and pipelines so that they are safe in operations and ensure preventing any incident.
Essentials of Automations: Optimizing FME Workflows with ParametersSafe Software
Are you looking to streamline your workflows and boost your projects’ efficiency? Do you find yourself searching for ways to add flexibility and control over your FME workflows? If so, you’re in the right place.
Join us for an insightful dive into the world of FME parameters, a critical element in optimizing workflow efficiency. This webinar marks the beginning of our three-part “Essentials of Automation” series. This first webinar is designed to equip you with the knowledge and skills to utilize parameters effectively: enhancing the flexibility, maintainability, and user control of your FME projects.
Here’s what you’ll gain:
- Essentials of FME Parameters: Understand the pivotal role of parameters, including Reader/Writer, Transformer, User, and FME Flow categories. Discover how they are the key to unlocking automation and optimization within your workflows.
- Practical Applications in FME Form: Delve into key user parameter types including choice, connections, and file URLs. Allow users to control how a workflow runs, making your workflows more reusable. Learn to import values and deliver the best user experience for your workflows while enhancing accuracy.
- Optimization Strategies in FME Flow: Explore the creation and strategic deployment of parameters in FME Flow, including the use of deployment and geometry parameters, to maximize workflow efficiency.
- Pro Tips for Success: Gain insights on parameterizing connections and leveraging new features like Conditional Visibility for clarity and simplicity.
We’ll wrap up with a glimpse into future webinars, followed by a Q&A session to address your specific questions surrounding this topic.
Don’t miss this opportunity to elevate your FME expertise and drive your projects to new heights of efficiency.
Key Trends Shaping the Future of Infrastructure.pdfCheryl Hung
Keynote at DIGIT West Expo, Glasgow on 29 May 2024.
Cheryl Hung, ochery.com
Sr Director, Infrastructure Ecosystem, Arm.
The key trends across hardware, cloud and open-source; exploring how these areas are likely to mature and develop over the short and long-term, and then considering how organisations can position themselves to adapt and thrive.
UiPath Test Automation using UiPath Test Suite series, part 4DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 4. In this session, we will cover Test Manager overview along with SAP heatmap.
The UiPath Test Manager overview with SAP heatmap webinar offers a concise yet comprehensive exploration of the role of a Test Manager within SAP environments, coupled with the utilization of heatmaps for effective testing strategies.
Participants will gain insights into the responsibilities, challenges, and best practices associated with test management in SAP projects. Additionally, the webinar delves into the significance of heatmaps as a visual aid for identifying testing priorities, areas of risk, and resource allocation within SAP landscapes. Through this session, attendees can expect to enhance their understanding of test management principles while learning practical approaches to optimize testing processes in SAP environments using heatmap visualization techniques
What will you get from this session?
1. Insights into SAP testing best practices
2. Heatmap utilization for testing
3. Optimization of testing processes
4. Demo
Topics covered:
Execution from the test manager
Orchestrator execution result
Defect reporting
SAP heatmap example with demo
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
PHP Frameworks: I want to break free (IPC Berlin 2024)Ralf Eggert
In this presentation, we examine the challenges and limitations of relying too heavily on PHP frameworks in web development. We discuss the history of PHP and its frameworks to understand how this dependence has evolved. The focus will be on providing concrete tips and strategies to reduce reliance on these frameworks, based on real-world examples and practical considerations. The goal is to equip developers with the skills and knowledge to create more flexible and future-proof web applications. We'll explore the importance of maintaining autonomy in a rapidly changing tech landscape and how to make informed decisions in PHP development.
This talk is aimed at encouraging a more independent approach to using PHP frameworks, moving towards a more flexible and future-proof approach to PHP development.
GraphRAG is All You need? LLM & Knowledge GraphGuy Korland
Guy Korland, CEO and Co-founder of FalkorDB, will review two articles on the integration of language models with knowledge graphs.
1. Unifying Large Language Models and Knowledge Graphs: A Roadmap.
https://arxiv.org/abs/2306.08302
2. Microsoft Research's GraphRAG paper and a review paper on various uses of knowledge graphs:
https://www.microsoft.com/en-us/research/blog/graphrag-unlocking-llm-discovery-on-narrative-private-data/
Smart TV Buyer Insights Survey 2024 by 91mobiles.pdf91mobiles
91mobiles recently conducted a Smart TV Buyer Insights Survey in which we asked over 3,000 respondents about the TV they own, aspects they look at on a new TV, and their TV buying preferences.
Slack (or Teams) Automation for Bonterra Impact Management (fka Social Soluti...Jeffrey Haguewood
Sidekick Solutions uses Bonterra Impact Management (fka Social Solutions Apricot) and automation solutions to integrate data for business workflows.
We believe integration and automation are essential to user experience and the promise of efficient work through technology. Automation is the critical ingredient to realizing that full vision. We develop integration products and services for Bonterra Case Management software to support the deployment of automations for a variety of use cases.
This video focuses on the notifications, alerts, and approval requests using Slack for Bonterra Impact Management. The solutions covered in this webinar can also be deployed for Microsoft Teams.
Interested in deploying notification automations for Bonterra Impact Management? Contact us at sales@sidekicksolutionsllc.com to discuss next steps.
Kubernetes & AI - Beauty and the Beast !?! @KCD Istanbul 2024Tobias Schneck
As AI technology is pushing into IT I was wondering myself, as an “infrastructure container kubernetes guy”, how get this fancy AI technology get managed from an infrastructure operational view? Is it possible to apply our lovely cloud native principals as well? What benefit’s both technologies could bring to each other?
Let me take this questions and provide you a short journey through existing deployment models and use cases for AI software. On practical examples, we discuss what cloud/on-premise strategy we may need for applying it to our own infrastructure to get it to work from an enterprise perspective. I want to give an overview about infrastructure requirements and technologies, what could be beneficial or limiting your AI use cases in an enterprise environment. An interactive Demo will give you some insides, what approaches I got already working for real.
"Impact of front-end architecture on development cost", Viktor TurskyiFwdays
I have heard many times that architecture is not important for the front-end. Also, many times I have seen how developers implement features on the front-end just following the standard rules for a framework and think that this is enough to successfully launch the project, and then the project fails. How to prevent this and what approach to choose? I have launched dozens of complex projects and during the talk we will analyze which approaches have worked for me and which have not.
Designing Great Products: The Power of Design and Leadership by Chief Designe...
IPC 7711/7721 Revision B Rework, Modification & Repair of Electronic Assemblies
1. IPC 7711/7721 Revision B Rework, Modification & Repair of Electronic Assemblies Peggi Blakley NSWC-Crane Division Department of the Navy 7-34 co-chair
2.
3.
4.
5.
6.
7.
8.
9.
10.
11. Procedure Header Rework Procedure Procedure Number Procedure Title Examples of tools used for this Procedure Information from Section 1 to help users select the appropriate Procedure Examples of components
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
30.
31. Industry Acceptance 12 International Training Centers 17 U.S. Training Centers 14,971 Certified IPC Application Specialists 780 Currently Certified IPC Trainers IPC-7711/7721
32.
Editor's Notes
Hi, my name is Peggi Blakley. I want to begin by saying that I am very excited to host this web cast.