This presentation is about Open Source Software, this may be helpful to understand what is open source, why we need open source software and examples of Open Source software.
This Presentation is created by Harishankar Ranagaraj and was presentated at various sessions.
Harishankar Rangaraj is the founder and Director of Open Source Academy India Pvt Ltd.
For any support on Open Source Software you can Contact us.
Open Source Academy Pvt India Ltd,
Email: info@osaipl.com
www.osaipl.com
This presentation is about Open Source Software, this may be helpful to understand what is open source, why we need open source software and examples of Open Source software.
This Presentation is created by Harishankar Ranagaraj and was presentated at various sessions.
Harishankar Rangaraj is the founder and Director of Open Source Academy India Pvt Ltd.
For any support on Open Source Software you can Contact us.
Open Source Academy Pvt India Ltd,
Email: info@osaipl.com
www.osaipl.com
This ppt discusses the history of both the operating systems & compares both of them in terms of Kernel, memory management, GUI and application support.
This ppt gives information about:
1. Administering the server
2. Correcting installation problems
3. Setting up user accounts
4. Connecting to the network
5. Configuring utilities
In the presentation I have tried to cover the Evolution of Linux as an Operating System. The most of the content used is freely available on Internet , I have just tried to streamline it and summarize it as cleanly as possible from my point of view. Any improvements, suggestions, comments are most welcom.
It is a Unix like operating system.
It can run on 32 bit and 64 bit hardware.
Linux OS, is a freely distributable, cross-platform
Supports multiple processors.
True multi-tasking, multi-user OS.
Following are some of the important features of Linux Operating System.
Portable - Portability means softwares can works on different types of hardwares in same way.Linux kernel and application programs supports their installation on any kind of hardware platform.
Open Source - Linux source code is freely available and it is community based development project. Multiple teams works in collaboration to enhance the capability of Linux operating system and it is continuously evolving.
Multi-User - Linux is a multiuser system means multiple users can access system resources like memory/ ram/ application programs at same time.
Multiprogramming - Linux is a multiprogramming system means multiple applications can run at same time.
Hierarchical File System - Linux provides a standard file structure in which system files/ user files are arranged.
Shell - Linux provides a special interpreter program which can be used to execute commands of the operating system. It can be used to do various types of operations, call application programs etc.
Security - Linux provides user security using authentication features like password protection/ controlled access to specific files/ encryption of data.
I have described all about linux OS starting from basics.
I guess this PPT will really be very very helpful for you guys.
This was one of the most appreciable PPT in my time when i presented it in my class.
A complete intoduction to Computer Software and Different types of Computer Software.
The Best ppt to any beginner to learn computer software.
thank you
An introduction to open source softwareSanjuktaBanik
Open-source software (OSS) is computer software that is released under a license in which the copyright holder grants users the rights to use, study, change, and distribute the software and its source code to anyone and for any purpose.
This ppt discusses the history of both the operating systems & compares both of them in terms of Kernel, memory management, GUI and application support.
This ppt gives information about:
1. Administering the server
2. Correcting installation problems
3. Setting up user accounts
4. Connecting to the network
5. Configuring utilities
In the presentation I have tried to cover the Evolution of Linux as an Operating System. The most of the content used is freely available on Internet , I have just tried to streamline it and summarize it as cleanly as possible from my point of view. Any improvements, suggestions, comments are most welcom.
It is a Unix like operating system.
It can run on 32 bit and 64 bit hardware.
Linux OS, is a freely distributable, cross-platform
Supports multiple processors.
True multi-tasking, multi-user OS.
Following are some of the important features of Linux Operating System.
Portable - Portability means softwares can works on different types of hardwares in same way.Linux kernel and application programs supports their installation on any kind of hardware platform.
Open Source - Linux source code is freely available and it is community based development project. Multiple teams works in collaboration to enhance the capability of Linux operating system and it is continuously evolving.
Multi-User - Linux is a multiuser system means multiple users can access system resources like memory/ ram/ application programs at same time.
Multiprogramming - Linux is a multiprogramming system means multiple applications can run at same time.
Hierarchical File System - Linux provides a standard file structure in which system files/ user files are arranged.
Shell - Linux provides a special interpreter program which can be used to execute commands of the operating system. It can be used to do various types of operations, call application programs etc.
Security - Linux provides user security using authentication features like password protection/ controlled access to specific files/ encryption of data.
I have described all about linux OS starting from basics.
I guess this PPT will really be very very helpful for you guys.
This was one of the most appreciable PPT in my time when i presented it in my class.
A complete intoduction to Computer Software and Different types of Computer Software.
The Best ppt to any beginner to learn computer software.
thank you
An introduction to open source softwareSanjuktaBanik
Open-source software (OSS) is computer software that is released under a license in which the copyright holder grants users the rights to use, study, change, and distribute the software and its source code to anyone and for any purpose.
Fundamentals of Free and Open Source SoftwareRoss Gardler
Introduction to the OSS Watch Business
and Sustainability Models Around Free and Open Source Software. this presentation doesn't deal with the business models, it introduces FOSS and the key licence types.
F. Questier, Free and open source software, workshop for Lib@web international training program 'Management of Electronic Information and Digital Libraries', university of Antwerp, October 2015
This lecture goes into basic info about Linux and the GNU Project.
Check the other Lectures and courses in
http://Linux4EnbeddedSystems.com
or Follow our Facebook Group at
- Facebook: @LinuxforEmbeddedSystems
Lecturer Profile:
Ahmed ElArabawy
- https://www.linkedin.com/in/ahmedelarabawy
WELCOME TO, WEBASHA TECHNOLOGIES WHICH IS A CONSPICUOUS NAME AMONG LINUX TRAINING PROVIDERS OF COUNTRY
Our approach to training and development is designed to ensure that our trainees become capable of adopting up-to-date skills to work in today's modern, widest range of Industrial and Service sectors.
The training team of Webasha includes professionals who have more than 6 years experience in their respective fields. All the training sessions conducted are strictly based on the requirements of our client.
We design and deliver the best quality training to meet the changing and growing needs of the Professionals
Learn how to use Linux, even if you’re a die-hard Windows user! There’s no question that Linux has taken over the enterprise, and paves the way for disruptive innovations in software. Join us for an informal session where we’ll introduce you to the benefits of developing on a Linux platform and show you some basic usage fundamentals, so that you can get started with Linux today.
There’s no question that Linux has taken over the enterprise, and paves the way for disruptive innovations in software. Bill Weinburg, senior director and analyst, open source strategy, at the Linux Foundation and Justin Reock, senior director of support and professional services at Rogue Wave Software recently presented Linux 101 at ZendCon 2016. Follow their presentation as they introduce the benefits of developing on a Linux platform and show some basic usage fundamentals so that you can get started with Linux today.
Sudheer Mechineni, Head of Application Frameworks, Standard Chartered Bank
Discover how Standard Chartered Bank harnessed the power of Neo4j to transform complex data access challenges into a dynamic, scalable graph database solution. This keynote will cover their journey from initial adoption to deploying a fully automated, enterprise-grade causal cluster, highlighting key strategies for modelling organisational changes and ensuring robust disaster recovery. Learn how these innovations have not only enhanced Standard Chartered Bank’s data infrastructure but also positioned them as pioneers in the banking sector’s adoption of graph technology.
Epistemic Interaction - tuning interfaces to provide information for AI supportAlan Dix
Paper presented at SYNERGY workshop at AVI 2024, Genoa, Italy. 3rd June 2024
https://alandix.com/academic/papers/synergy2024-epistemic/
As machine learning integrates deeper into human-computer interactions, the concept of epistemic interaction emerges, aiming to refine these interactions to enhance system adaptability. This approach encourages minor, intentional adjustments in user behaviour to enrich the data available for system learning. This paper introduces epistemic interaction within the context of human-system communication, illustrating how deliberate interaction design can improve system understanding and adaptation. Through concrete examples, we demonstrate the potential of epistemic interaction to significantly advance human-computer interaction by leveraging intuitive human communication strategies to inform system design and functionality, offering a novel pathway for enriching user-system engagements.
Communications Mining Series - Zero to Hero - Session 1DianaGray10
This session provides introduction to UiPath Communication Mining, importance and platform overview. You will acquire a good understand of the phases in Communication Mining as we go over the platform with you. Topics covered:
• Communication Mining Overview
• Why is it important?
• How can it help today’s business and the benefits
• Phases in Communication Mining
• Demo on Platform overview
• Q/A
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdfPaige Cruz
Monitoring and observability aren’t traditionally found in software curriculums and many of us cobble this knowledge together from whatever vendor or ecosystem we were first introduced to and whatever is a part of your current company’s observability stack.
While the dev and ops silo continues to crumble….many organizations still relegate monitoring & observability as the purview of ops, infra and SRE teams. This is a mistake - achieving a highly observable system requires collaboration up and down the stack.
I, a former op, would like to extend an invitation to all application developers to join the observability party will share these foundational concepts to build on:
Generative AI Deep Dive: Advancing from Proof of Concept to ProductionAggregage
Join Maher Hanafi, VP of Engineering at Betterworks, in this new session where he'll share a practical framework to transform Gen AI prototypes into impactful products! He'll delve into the complexities of data collection and management, model selection and optimization, and ensuring security, scalability, and responsible use.
In his public lecture, Christian Timmerer provides insights into the fascinating history of video streaming, starting from its humble beginnings before YouTube to the groundbreaking technologies that now dominate platforms like Netflix and ORF ON. Timmerer also presents provocative contributions of his own that have significantly influenced the industry. He concludes by looking at future challenges and invites the audience to join in a discussion.
LF Energy Webinar: Electrical Grid Modelling and Simulation Through PowSyBl -...DanBrown980551
Do you want to learn how to model and simulate an electrical network from scratch in under an hour?
Then welcome to this PowSyBl workshop, hosted by Rte, the French Transmission System Operator (TSO)!
During the webinar, you will discover the PowSyBl ecosystem as well as handle and study an electrical network through an interactive Python notebook.
PowSyBl is an open source project hosted by LF Energy, which offers a comprehensive set of features for electrical grid modelling and simulation. Among other advanced features, PowSyBl provides:
- A fully editable and extendable library for grid component modelling;
- Visualization tools to display your network;
- Grid simulation tools, such as power flows, security analyses (with or without remedial actions) and sensitivity analyses;
The framework is mostly written in Java, with a Python binding so that Python developers can access PowSyBl functionalities as well.
What you will learn during the webinar:
- For beginners: discover PowSyBl's functionalities through a quick general presentation and the notebook, without needing any expert coding skills;
- For advanced developers: master the skills to efficiently apply PowSyBl functionalities to your real-world scenarios.
Pushing the limits of ePRTC: 100ns holdover for 100 daysAdtran
At WSTS 2024, Alon Stern explored the topic of parametric holdover and explained how recent research findings can be implemented in real-world PNT networks to achieve 100 nanoseconds of accuracy for up to 100 days.
GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using Deplo...James Anderson
Effective Application Security in Software Delivery lifecycle using Deployment Firewall and DBOM
The modern software delivery process (or the CI/CD process) includes many tools, distributed teams, open-source code, and cloud platforms. Constant focus on speed to release software to market, along with the traditional slow and manual security checks has caused gaps in continuous security as an important piece in the software supply chain. Today organizations feel more susceptible to external and internal cyber threats due to the vast attack surface in their applications supply chain and the lack of end-to-end governance and risk management.
The software team must secure its software delivery process to avoid vulnerability and security breaches. This needs to be achieved with existing tool chains and without extensive rework of the delivery processes. This talk will present strategies and techniques for providing visibility into the true risk of the existing vulnerabilities, preventing the introduction of security issues in the software, resolving vulnerabilities in production environments quickly, and capturing the deployment bill of materials (DBOM).
Speakers:
Bob Boule
Robert Boule is a technology enthusiast with PASSION for technology and making things work along with a knack for helping others understand how things work. He comes with around 20 years of solution engineering experience in application security, software continuous delivery, and SaaS platforms. He is known for his dynamic presentations in CI/CD and application security integrated in software delivery lifecycle.
Gopinath Rebala
Gopinath Rebala is the CTO of OpsMx, where he has overall responsibility for the machine learning and data processing architectures for Secure Software Delivery. Gopi also has a strong connection with our customers, leading design and architecture for strategic implementations. Gopi is a frequent speaker and well-known leader in continuous delivery and integrating security into software delivery.
Essentials of Automations: The Art of Triggers and Actions in FMESafe Software
In this second installment of our Essentials of Automations webinar series, we’ll explore the landscape of triggers and actions, guiding you through the nuances of authoring and adapting workspaces for seamless automations. Gain an understanding of the full spectrum of triggers and actions available in FME, empowering you to enhance your workspaces for efficient automation.
We’ll kick things off by showcasing the most commonly used event-based triggers, introducing you to various automation workflows like manual triggers, schedules, directory watchers, and more. Plus, see how these elements play out in real scenarios.
Whether you’re tweaking your current setup or building from the ground up, this session will arm you with the tools and insights needed to transform your FME usage into a powerhouse of productivity. Join us to discover effective strategies that simplify complex processes, enhancing your productivity and transforming your data management practices with FME. Let’s turn complexity into clarity and make your workspaces work wonders!
GraphRAG is All You need? LLM & Knowledge GraphGuy Korland
Guy Korland, CEO and Co-founder of FalkorDB, will review two articles on the integration of language models with knowledge graphs.
1. Unifying Large Language Models and Knowledge Graphs: A Roadmap.
https://arxiv.org/abs/2306.08302
2. Microsoft Research's GraphRAG paper and a review paper on various uses of knowledge graphs:
https://www.microsoft.com/en-us/research/blog/graphrag-unlocking-llm-discovery-on-narrative-private-data/
SAP Sapphire 2024 - ASUG301 building better apps with SAP Fiori.pdfPeter Spielvogel
Building better applications for business users with SAP Fiori.
• What is SAP Fiori and why it matters to you
• How a better user experience drives measurable business benefits
• How to get started with SAP Fiori today
• How SAP Fiori elements accelerates application development
• How SAP Build Code includes SAP Fiori tools and other generative artificial intelligence capabilities
• How SAP Fiori paves the way for using AI in SAP apps
The Art of the Pitch: WordPress Relationships and SalesLaura Byrne
Clients don’t know what they don’t know. What web solutions are right for them? How does WordPress come into the picture? How do you make sure you understand scope and timeline? What do you do if sometime changes?
All these questions and more will be explored as we talk about matching clients’ needs with what your agency offers without pulling teeth or pulling your hair out. Practical tips, and strategies for successful relationship building that leads to closing the deal.
1. Introduction to GNU/Linux
Rupam Das
Email: info@rupamdas.com info@nxnvision.com
Website: www.rupamdas.com www.nxnvision.com
Contact: +91 98407 84107
2. Objectives
• Linux Introduction
• Linux anatomy, processes, file system, file structure
• Boot process, shutdown and reboot
• Login, logout process
• Standard input, standard output, standard error, redirection, pipes,
filters
• Managing passwords
• Getting help – man command
• Files and related commands
Website: www.nxnvision.com Email: info@nxnvision.com Phone: +91 98407 84107
3. Prerequisites for this session
• Basic understanding of Operating Systems
• Familiarity with any desktop computer
Website: www.nxnvision.com Email: info@nxnvision.com Phone: +91 98407 84107
4. Operating system
• What is an Operating system?
• A system program that controls the execution of application programs
• An interface between applications and hardware
• A program that manages the system memory and other resources of the
system
Website: www.nxnvision.com Email: info@nxnvision.com Phone: +91 98407 84107
5. Operating System Objectives
• Convenience
– Makes the computer more convenient to use
• Efficiency
– Allows computer system resources to be used in an efficient manner
• Ability to evolve
– Permit effective development, testing, and introduction of new system
functions without interfering with service
Website: www.nxnvision.com Email: info@nxnvision.com Phone: +91 98407 84107
6. Layers of Computer System
Website: www.nxnvision.com Email: info@nxnvision.com Phone: +91 98407 84107
7. Services Provided by Operating System
• Program development
• Editors, Compilers, Linkers and debuggers
• Program execution
• User applications and Services
• Access to I/O devices
• Hard disk drive, DVD drive, Ethernet, USB, Bluetooth
• Controlled access to files
• File system management
• System access
• Control Panel
Website: www.nxnvision.com Email: info@nxnvision.com Phone: +91 98407 84107
8. Services Provided by Operating System
• Error detection and response
– Internal and external hardware errors
• Memory error
• Device failure
– Software errors
• Arithmetic overflow
• Access forbidden memory locations
• Accounting
– Collect usage statistics
– Monitor performance
– Used to anticipate future enhancements
– Used for billing purposes
Website: www.nxnvision.com Email: info@nxnvision.com Phone: +91 98407 84107
9. What is GNU/Linux?
• GNU/Linux is a free, open source, UNIX-like operating system (OS)
that runs on diverse computing hardware platforms
• GNU provides the shell, library, compilers
• Linux provides the kernel
• First released in 1991, based on Linux kernel developed by Linus
Torvalds and the programs developed by Richard Stallman
• This combination is called GNU/Linux OS or mostly just referred to
Linux OS
• For all practical purposes, Linux refers to GNU/Linux operating
system
• For more information on Linux and GNU/FSF visit sites,
http://www.kernel.org, http://www.gnu.org & http://www.fsf.org
Website: www.nxnvision.com Email: info@nxnvision.com Phone: +91 98407 84107
10. Brief History of Linux
• First version of Linux was released by Linus Torvalds in 1991
• Further release history in brief
– Version 1.0.0 of March 14 1994 supported only single-processor i386
machines.
– Version 1.2.0 of March 1995 added support for Alpha, Sparc and MIPS.
– Version 2 of June 9 1996 included SMP support and added support for
more types of processors.
– Version 2.2.0 of January 25 1999
– Version 2.4.0 - January 4 2001 – added support for USB, ISA Plug-and-
Play
– Version 2.6 - December 17, 2003
Website: www.nxnvision.com Email: info@nxnvision.com Phone: +91 98407 84107
11. Modern Linux Systems
• Several distributions are available that use Linux kernel and GNU
software packages
• Popular Linux distributions are
– RedHat Enterprise Linux (not free)
– Fedora
– Ubuntu
– Debian
– Suse
– Mandriva
– and several others available. Check
http://en.wikipedia.org/wiki/List_of_Linux_distributions
Website: www.nxnvision.com Email: info@nxnvision.com Phone: +91 98407 84107
12. Linux as a Development Platform
• Ample support for software development, whether kernel or
applications
• Development is possible in C, C++, Shell Scripts, Java, PHP,
Python, Perl, HTML, CGI
• For applications development several IDEs are available:
– Eclipse for C, C++ and Java
– Source Navigator, Glade, KDevelop, KDE Studio for C/C++
– NetBeans, Sun One Studio, WebSphere for Java
– Komodo and PerlComposer for Perl
– Komodo, Zend for PHP
– Cooledit, ActivePython, wxPython for Python
Website: www.nxnvision.com Email: info@nxnvision.com Phone: +91 98407 84107
13. Linux as a Server
• As a server, Linux has achieved the most recognition
• The stable and highly evolved networking features and options
make Linux based servers a good choice
• Linux based servers are available for
– Web server – Apache Web server
– File server - Samba
– Mail server - sendmail
– DHCP server
– Printer server - CUPS
Website: www.nxnvision.com Email: info@nxnvision.com Phone: +91 98407 84107
14. Linux Kernel development model
• Linux development is primarily driven by Linux users and
developers, spread all over the world
• The developers (or kernel hackers) test Linux releases and
locate software bugs and provides fixes OR add more
functionality w.r.t. the kernel and the hardware supported by the
kernel. All these are reported to the Linux Kernel maintainers
• All modifications are then verified, integrated and then released
in the following version.
• The releases are maintained at http://www.kernel.org. Each
kernel version tree has at least one maintainer
• Currently the active streams are 2.2.x, 2.4.x and 2.6.x. Currently
more focused work is going on the 2.6.x stream
Website: www.nxnvision.com Email: info@nxnvision.com Phone: +91 98407 84107
15. • GNU is a project started in 1984 to develop a complete OS which
would be like Unix but ‘free’ (http://www.gnu.org)
• GNU is read as “GNU is Not Unix”, a recursive acronym
• Started by Richard Stallman (http://www.stallman.org/) who also
started the Free Software Foundation
(http://www.gnu.org/philosophy/free-sw.html)
• When GNU programs were finished, the GNU kernel was not.
• So, GNU used the Linux kernel and the GNU/Linux OS was born
in 1991.
• Free Software Foundation (FSF) is the principal sponsor for GNU
projects (http://www.fsf.org)
Brief History of GNU and FSF
Website: www.nxnvision.com Email: info@nxnvision.com Phone: +91 98407 84107
16. Significance of GNU/Linux today
• GNU/Linux offers a cheap and stable alternative OS
• Large number of developers spread over worldwide who
contribute to its development and sustainment
• Cheaper or even free alternatives for existing paid/proprietary
software
• It runs on even very low end computing hardware
Website: www.nxnvision.com Email: info@nxnvision.com Phone: +91 98407 84107
17. Applications of Linux
• Linux
• As an alternative Desktop
• As a Development platform
• As a Server
• In Embedded Systems
• Advantages and Disadvantages of Linux
• Popular Windows applications and their Linux equivalents
• Popular Linux distributions
Website: www.nxnvision.com Email: info@nxnvision.com Phone: +91 98407 84107
18. Linux as an alternative Desktop
• Linux has all the features of a normal Desktop
– Stable and evolving GNU/Linux OS
– Built in desktop features like file browser/manager, Internet browser,
system settings, taskbar, desktop screen and shortcuts to
applications
– GUI, with options to choose from – Gnome, KDE
– Command line interface for the advanced user
– Capability to install 3rd party applications like FireFox, Thunderbird,
OpenOffice
– Built-in (or downloadable) drivers for various hardware peripherals
like CD/DVD drive, printers, monitors, mouse, keyboards
– Various softwares available for documentation, audio, video,
Internet browsing, and much more
Website: www.nxnvision.com Email: info@nxnvision.com Phone: +91 98407 84107
19. Linux as a Development Platform
• Ample support for software development, whether kernel or
applications
• For kernel, source code of kernel, C libraries, compilers, linkers
are available for free download
• Development is possible in C, C++, Java, PHP, Python, Perl,
HTML, CGI
• For applications development several IDEs are available:
– Eclipse for C, C++ and Java
– Source Navigator, Glade, KDevelop for C/C++
– NetBeans, Sun One Studio, WebSphere for Java
– Komodo and PerlComposer for Perl
– Cooledit, ActivePython, wxPython for Python
Website: www.nxnvision.com Email: info@nxnvision.com Phone: +91 98407 84107
20. Linux as a Development Platform (2)
• For source code control and management (SCM) several
softwares are available
– CVS, Subversion, Source Integrity
• Simulators
– NS2 for Networking
– SkyEye for hardware and OS/RTOS simulator:
• CPU cores: ARM7TDMI, ARM720T, StrongARM, XScale
• OS/RTOS: uClinux, ARM Linux, Nucleus, eCos, uC/OSII
• Emulators
– CPU emulator: QEMU
– Even Windows emulation is possible using WINE (WINdows
Emulator) software on Linux!
Website: www.nxnvision.com Email: info@nxnvision.com Phone: +91 98407 84107
21. Linux as a Server
• As a server, Linux has achieved the most recognition
• The stable and highly evolved networking features and options
make Linux based servers a good choice
• Linux based servers are available for
– Web server – Apache Web server
– File server - Samba
– Mail server - sendmail
– DNS server
– DHCP server
– Printer server
Website: www.nxnvision.com Email: info@nxnvision.com Phone: +91 98407 84107
22. Linux in Embedded Applications
• Linux has been customized for numerous embedded
applications:
– Networking – Routers, Switches, Gateways, Thin Clients
– Audio/Video – Set top box, DVR, Portable Music Players
– Communications – Mobile phones, PDAs, IP Telephones
– Robotics – Entertainment and Utility robots
• For a glimpse of Linux in embedded devices, visit
– http://www.linuxfordevices.com/c/a/Linux-For-Devices-Articles/The-
Linux-Devices-Showcase
Website: www.nxnvision.com Email: info@nxnvision.com Phone: +91 98407 84107
23. Popular Windows software and Linux equivalents
• This list is an incomplete comparison between MS Windows XP
and Fedora distribution
• File Browser – Windows Explorer, Nautilus
• Internet Browser – Internet Explorer, Konqueror/Mozilla Firefox
• Documentation (Documents, Presentations, Spreadsheets)– MS
Office, OpenOffice
• PDF Reader – Adobe, Evince/KPDF
• Simple Graphics – MS Paint, KolourPaint
• Advanced Graphics – Adobe Photoshop, GIMP
• Text editor – Notepad/Wordpad, Gedit
• Image Viewer – Windows Picture and Fax Viewer, gThumb
• Music player – Windows Media player, Audacious/Rhythmbox
• Video player - Windows Media player, Totem Movie Player
• Email client – MS Outlook, Evolution/Mozilla Thunderbird
Website: www.nxnvision.com Email: info@nxnvision.com Phone: +91 98407 84107
24. Popular Linux Distributions
• Linux Distribution refers to a package of a particular stable Linux
Kernel version along with host of other programs and applications that
are combined together
• There are several distributions (or versions) available
• Few of the well known desktop distributions are:
– RedHat Enterprise Linux (not free)
– Fedora
– Ubuntu
– Debian
– Mandriva
– Suse
Website: www.nxnvision.com Email: info@nxnvision.com Phone: +91 98407 84107
25. Advantages of Linux
• Low Cost
• Open Source software packages
• Stable
• Networking support
• Compatibility
• Configurability
• Multi-tasking
• Multi-user
• Secure
• Evolving constantly without adding cost to the end user
Website: www.nxnvision.com Email: info@nxnvision.com Phone: +91 98407 84107
26. Challenges in Linux
• Learning curve is higher for people exposed only to MS Windows
• It was initially designed by programmers for programmers, so for
normal users its difficult to grasp at the beginning
• Not all MS Windows application equivalents present in Linux
• Administration of Linux systems is tough for beginners
• Not all hardware are compatible, especially peripherals, whose
drivers may not exist
Website: www.nxnvision.com Email: info@nxnvision.com Phone: +91 98407 84107
27. Linux Architecture and Features
• Linux architecture
• Linux Operating System features
• Linux File System
• Linux Kernel Architecture and Features
• Kernel and User interface
• Linux GUI
• Linux Console and basic commands
Website: www.nxnvision.com Email: info@nxnvision.com Phone: +91 98407 84107
28. Linux OS features
• Some of the main features of Linux OS are:
– File system
– Multitasking
– Multiuser
– Multiple platform support
– Memory protection between processes
– Virtual Memory using paging to disk
– Networking support
Website: www.nxnvision.com Email: info@nxnvision.com Phone: +91 98407 84107
29. Linux Architecture
• Hardware is surrounded by the operating system software
• Operating system is called the system kernel
– Implemented mostly in C and Assembly
– Interacts with applications and Shells
• Comes with a number of user services and interfaces
– Shell
– Components of the C compiler
Website: www.nxnvision.com Email: info@nxnvision.com Phone: +91 98407 84107
30. Basic Architecture of Linux
Website: www.nxnvision.com Email: info@nxnvision.com Phone: +91 98407 84107
31. Linux Architecture (2)
• Linux is primarily divided into two parts, Kernel space and User space
• User Space
– User space contains all the user applications
– It contains the OS services like command shells and window system
– It also contains libraries and compilers, the programming interface to the
Kernel
– Those applications that need to access the kernel, use the System call
feature provided by the Kernel
• Kernel Space
– Kernel contains entire code necessary to manage the processor,
peripherals and memory resources
– Part of Kernel code is generic and remaining code depends on the
architecture of the processor on which it has to run
– Kernel also provides TCP/IP networking support
Website: www.nxnvision.com Email: info@nxnvision.com Phone: +91 98407 84107
33. Linux Kernel and Responsibilities
• Responsible for
• Scheduling running of user and other processes.
• Allocation of memory.
• Managing the swapping between memory and disk.
• For moving data to and from the peripherals.
• Receives service requests from the processes and honours them
Website: www.nxnvision.com Email: info@nxnvision.com Phone: +91 98407 84107
34. Processes
• A program in execution
• An instance of a program running on a computer
• The entity that can be assigned to and executed on a processor
• A unit of activity characterized by a single sequential thread of
execution, a current state, and an associated set of system resources
• Consists of three components
– An executable program
– Associated data needed by the program
– Execution context of the program
• All information the operating system needs to manage the process
Website: www.nxnvision.com Email: info@nxnvision.com Phone: +91 98407 84107
35. User Mode and Kernel modes of process
• At any time only one process can engage a given CPU
• This process may be in user mode or kernel mode
• User applications run in user mode normally
• Kernel code runs in kernel or privileged mode
• If a user mode application needs kernel privileges, then the
application switches to privileged mode to access privileged
resources
– The above method allows the kernel to keep a watch over the user mode
application’s actions
– The switching to kernel mode takes place with “System Call”
Website: www.nxnvision.com Email: info@nxnvision.com Phone: +91 98407 84107
36. Linux File System
• In Linux everything is a file!
• Everything can be accessed and handled like a way a normal file is
handled
– Open, Close, Read, Write, Create, Remove
• This means regular files, directories, links, devices and peripherals,
pipes and sockets
• The files names are Case Sensitive! Can contain any character
except ‘/’
• File name length is not restricted
• Examples
– README, temp.txt, .bashrc, New File, simple.doc.backup
Website: www.nxnvision.com Email: info@nxnvision.com Phone: +91 98407 84107
37. File Paths
• A file path in Linux is a sequence of nested directories
– Last element can be a file or directory
• Path can be relative or absolute
– Relative path – Documents/Design/Software/DDD-XYZ.pdf
– Absolute path - /home/jack/work/software/proj1/source1.c
• The ‘/’ represents the ‘root’ of the file system
– All absolute file paths start from root directory
• The Linux filesystem structure is defined by the Filesystem Hierarchy
Standard (FHS): http://www.pathname.com/fhs/
Website: www.nxnvision.com Email: info@nxnvision.com Phone: +91 98407 84107
39. Directory Description – Important ones
• bin Essential command binaries
• boot Static files of the boot loader
• dev Device files
• etc Host-specific system config
• home User login and data folders
• lib Essential shared libraries and kernel modules
• mnt Mount point for mounting a filesystem or media
• opt Add-on application software packages
• proc Virtual folder that has information about system
• root Home folder of the Linux superuser
• sbin Essential system binaries
• tmp Temporary files
• usr Secondary hierarchy
• var Variable data
Website: www.nxnvision.com Email: info@nxnvision.com Phone: +91 98407 84107
40. • /bin:
– The bin directory contains several useful commands that are of use to both
the system administrator as well as non−privileged users. It usually
contains the shells like bash, csh, etc.
– Example commands :cp, mv, rm, cat, ls
• /boot:
– This directory contains everything required for the boot process except for
configuration files not needed at boot time
– Example : /boot/vmlinuz, /boot/vmlinuz−kernel−version
• /dev
– /dev is the location of special or device files. Look through this directory
and you should hopefully see hda1, hda2 etc. which represent the various
partitions on the first master drive of the system.
– /dev/cdrom and /dev/fd0 represent your CD−ROM drive and your floppy
drive.
Website: www.nxnvision.com Email: info@nxnvision.com Phone: +91 98407 84107
41. • /etc:
– This is the nerve center of your system, it contains all system related configuration
files in here or in its sub directories
– Example: /etc/fstab, /etc/passwd, /etc/shadow
• /home:
– /home can get quite large and can be used for storing downloads, compiling,
installing and running programs, your mail, your collection of image or sound files
etc. Each user is also assigned a specific directory that is accessible only to them
and the system administrator, typically in /home path
• /lib:
– The /lib directory contains kernel modules and those shared library images (the C
programming code library) needed to boot the system and run the commands in the
root filesystem, ie. by binaries in /bin and /sbin.
Website: www.nxnvision.com Email: info@nxnvision.com Phone: +91 98407 84107
42. • /root:
– This is the home directory of the System Administrator.
• /sbin:
– /sbin should contain only binaries essential for booting, restoring, recovering, and/or
repairing the system in addition to the binaries in /bin.
• /usr:
– /usr usually contains by far the largest share of data on a system. Hence, this is one
of the most important directories in the system as it contains all the user binaries,
their documentation, libraries, header files, etc.
• /var:
– Contains variable data like system logging files, mail and printer spool directories,
and transient and temporary files.
– Example:/var/cache: Is intended for cached data from applications
– /var/log: Log files from the system and various programs and services
Website: www.nxnvision.com Email: info@nxnvision.com Phone: +91 98407 84107
43. • /mnt:
• This is a generic mount point under which you mount your filesystems or devices.
Mounting is the process by which you make a filesystem available to the system.
After mounting your files will be accessible under the mount−point. This directory
usually contains mount points or sub−directories where you mount your floppy and
your CD.
• /proc:
• /proc is very special in that it is also a virtual filesystem. It's sometimes referred to
as a process information pseudo−file system. It doesn't contain 'real' files but
runtime system information (e.g. system memory, devices mounted, hardware
configuration, etc).
Website: www.nxnvision.com Email: info@nxnvision.com Phone: +91 98407 84107
44. Linux Booting
• For desktop PCs the typical boot sequence is:
– BIOS – After system power-on, to identify, test, and initialize system
devices such as the video display card, hard disk, floppy disk and other
hardware. BIOS loads the Bootloader, mostly GRUB (earlier LILO)
– GRUB loads the Linux Operating System (Kernel and File System) into the
memory. It checks the system hardware and peripherals and executes the
Kernel.
– Kernel execution first calls the Init program which is the 1st user space
program
– Init runs /etc/inittab which then runs the necessary start-up scripts
– After all the start-up scripts are executed, the system comes to multi-user
mode
Website: www.nxnvision.com Email: info@nxnvision.com Phone: +91 98407 84107
45. Shutdown and reboot in Linux
• Click on System icon in the task bar, then click on Shut Down
• When system asks “Shut down this system now”, the different options
provided can be selected
• Cancel to avoid shutdown
• Restart to reboot the system
• Shut down to shut the system
Website: www.nxnvision.com Email: info@nxnvision.com Phone: +91 98407 84107
46. Login in Linux
• Power-on the Linux system and wait till it displays the login screen
• The login is an important security feature of Linux
– Without logging in, little can be done
• So, first thing one needs to work in Linux is a valid Username and
Password set
– Username – An alphanumeric ID used to identify the user who is logged in.
Only the Linux Administrator can add users to any Linux system
– Password – An alphanumeric password string used to authenticate the
user logging in. Its stored in encrypted form in the system
Website: www.nxnvision.com Email: info@nxnvision.com Phone: +91 98407 84107
47. Login in Linux (2)
• One Username and password set plus the root password is created at
the time of Linux installation
• If you do not know the Username and Password combination, ask your
System Administrator
Website: www.nxnvision.com Email: info@nxnvision.com Phone: +91 98407 84107
48. Logout in Linux
• When in console, logging out is done using the command “exit”
• In GUI, System-> Log Out <Username> will bring up the dialog, “Log
out of this system now?”
• User can then chose to log out or cancel
Website: www.nxnvision.com Email: info@nxnvision.com Phone: +91 98407 84107
50. Change of password
• Passwords can be changed later through GUI or console
• From console the command is “passwd”
– Given the command, first the old password will be asked
– If the old password is correct, then it prompts for the new password, twice
– If new password is typed correctly both times, the password is modified
• In GUI, the following sequence has to followed
– System-> Administration->User and Groups
– Then select the user whose password is to be modified and click on
Properties
– Under the Account tab, the password can be changed
Website: www.nxnvision.com Email: info@nxnvision.com Phone: +91 98407 84107
51. More on passwords
• Password tips
• NEVER tell anyone else your official password
• Don’t write it down
• A good password typically is:
• 8 (or more) characters long
• uses a mix of uppercase and lowercase letters, numbers, and symbols.
For example, yGnt4^%a12
Website: www.nxnvision.com Email: info@nxnvision.com Phone: +91 98407 84107
52. Users in Linux
• Linux has some default users preconfigured
– root, daemon, nobody, bin, uucp
– These are to be used by the system for allowing access to various utilities
and system programs
– User “root” is the Administrator, or better known as the “super user”
• “root” has ALL the privileges to add/delete/modify anything within the system
• Unless its absolutely necessary, logging into “root” is not advised
• The list of all users is available in “/etc/passwd”
• The passwords of these users are available in “/etc/shadow” file (in
encrypted manner)
• All users are members of some group and the list of all groups is in
“/etc/group” file
Website: www.nxnvision.com Email: info@nxnvision.com Phone: +91 98407 84107
53. Users and Groups
• User accounts are used within computer environments to verify the
identity of the person using a computer system.
• Groups are logical constructs that can be used to cluster user
accounts together for a specific purpose.
• For instance, if a company has a group of system administrators, they
can all be placed in a system administrator group with permission to
access key resources and machines.
Website: www.nxnvision.com Email: info@nxnvision.com Phone: +91 98407 84107
54. User and Group Permissions
• There are three permissions for files, directories, and applications.
r — Indicates that a given category of user can read a file.
w — Indicates that a given category of user can write to a file.
x — Indicates that a given category of user can execute the file.
A fourth symbol (-) indicates that no access is permitted
• Each of the three permissions are assigned to three defined categories
of users. The categories are:
owner — The owner of the file or application.
group — The group that owns the file or application.
everyone — All users with access to the system.
• Reading file permissions : ls -l
> ls -l
myfile -rwxr-x--- 1 george administrators 10 2006-03-09
21:31 myfile
Website: www.nxnvision.com Email: info@nxnvision.com Phone: +91 98407 84107
55. User and Group Permissions (2)
• The first character simply indicates the type of file as indicated in the
table below:
Character Type of file
d directory
- regular file
l symbolic link
s socket
p named pipe
c character device file
b block device file
Letter Permission
r Read
w Write
x Execute
- No permission
Website: www.nxnvision.com Email: info@nxnvision.com Phone: +91 98407 84107
56. User and Group Permissions (3)
Letter Type of users
u User (owner of the file)
g Group (group to which belong the file)
o Other (users who are neither a member of the Group
nor the owner of the file)
a All (everybody)
• So, in our example myfile features the following set of permissions :
rwxr-x---.
– This means that George has all three rights on it, that members of the
Administrators group can only read (R) and execute (X) the file, and that
everybody else can't do anything with the file.
Website: www.nxnvision.com Email: info@nxnvision.com Phone: +91 98407 84107
57. User and Group Permissions (4)
• chmod command
chmod o+r myfile
• adds read permission to the others on myfile
chmod ug+rx myfile
• adds read and execute permissions to both the owner (user) and the group on
myfile
chmod a-rwx myfile
• removes all permissions to everybody (all) on myfile
chmod 755 myfile
• rwxr-xr-x, all rights to the owner, other people only read and execute
Website: www.nxnvision.com Email: info@nxnvision.com Phone: +91 98407 84107
58. User and Group Permissions (5)
• Command line tools to manage users and groups:
– useradd, usermod, and userdel — methods of adding, deleting and modifying
user accounts
– groupadd, groupmod, and groupdel — methods of adding, deleting, and
modifying user groups
– gpasswd — method of administering the /etc/group file
– Some Examples:
> useradd jack
> groupadd trainee
> gpasswd –a jack trainee
> userdel jill
> groupdel trainee
• Chown Command (Change Ownership)
> chown newowner file
• Chgrp Command (Change Group)
> chgrp newgroup file
Website: www.nxnvision.com Email: info@nxnvision.com Phone: +91 98407 84107
59. Getting help in Linux – Man pages
• Man pages
• “man <command>” will show the help on the “<command>”
• For example, “man man” will show the information about man command
itself
• Man pages are documentation of the Linux commands and utilities
• To quit a man page press ‘q’/’Q’
• Shell help
• In case you know the command name, try “<command> --help”
• In most cases, the basic command line options and explanation would be
displayed
• Example,
mv --help
Website: www.nxnvision.com Email: info@nxnvision.com Phone: +91 98407 84107
60. Getting help in Linux - Apropos
• Apropos
– “apropos <topic>” will display a list of commands in Linux that have
“topic” included in its documentation
– Good way to start searching on a topic, if the exact command is not known
– By default the apropos database may not be present. To generate the
database use the following command (while logged in as “root”)
• /usr/bin/catman -w
Website: www.nxnvision.com Email: info@nxnvision.com Phone: +91 98407 84107
61. Basic console commands – ls
• “ls” command displays the list of files present in a given directory
except those starting with a ‘.’
• Other options of “ls”
• ls -a
• Lists all the files (including .* files)
• ls -l
• Long listing (type, date, size, owner, permissions)
• ls -t
• Lists the most recent files first
• ls -S
• Lists the biggest files first
• ls -r
• Reverses the sort order
• ls –h
• Enables display of file sizes in K, M and G
• ls -ltr
• Long listing, most recent files at the end
Website: www.nxnvision.com Email: info@nxnvision.com Phone: +91 98407 84107
62. Basic console commands – ls (2)
• Using wild card character ‘*’
• ls - *.txt
– Displays list of all files that end in “txt”, except those starting with ‘.’
• ls –d .*
– Lists all the files and directories starting with ‘.’
– ‘-d’ tells ls not to display the contents of directories
• ls temp.*
– Lists all files starting with name temp.
– Like temp.doc, temp.txt, temp.xls
Website: www.nxnvision.com Email: info@nxnvision.com Phone: +91 98407 84107
63. Special diretories
• If we give the command “ls –a”, we see two directories, ‘.’ and ‘..’
• The ‘.’ represents the current directory
– Used as ‘./’.
– Files ./temp.txt and temp.txt are the same in a given directory
• The ‘..’ represents the parent directory
– Used as ‘../’, typically for moving up by one level with ‘cd’ command
• The ‘~’ represents the home directory of users
– If there is a user “user1” and user’s home path is “/home/user1”, this path
can be referenced as “~user1”
Website: www.nxnvision.com Email: info@nxnvision.com Phone: +91 98407 84107
64. Basic console commands – cd
• “cd” or change directory command allows the user to traverse through
the directories and file paths
– “cd <dir>” changes the current directory to the directory <dir>, provided the
directory exists and the user has access privileges to the directory
– <dir> can be relative or absolute
• cd /home/user1/Desktop/Folder1
• cd Documents/group-docs/engg
– “cd – “ gets back to the previous current directory.
– “pwd” displays the current directory ("working directory").
Website: www.nxnvision.com Email: info@nxnvision.com Phone: +91 98407 84107
65. Basic console commands – cp
• Copy files/directories
– “cp” command is used to copy file(s) from a source to a destination
– cp <source_file> <target_file>
• Copies the source file to the target.
– cp file1 file2 file3 ... dir
• Copies the files to the target directory (last argument).
– cp -i
• Asks for user confirmation if the target file already exists
– cp –p
• Preserves the attributes of the source file(s) such as timestamp, mode,
ownership
– cp –r <source_dir> <target_dir>
• Copies the whole directory, recursively
Website: www.nxnvision.com Email: info@nxnvision.com Phone: +91 98407 84107
66. Basic console commands – mv and rm
• Move files
• mv <old_name> <new_name>
• Renames the given file or directory.
• mv -i
• If the new file already exits, asks for user confirm
• mv -p
• Preserves the attributes of the source file(s) such as timestamp, mode,
ownership
• mv –f
• Force the move, overwriting the destination file
• Remove files
• rm file1 file2 file3
• Removes the given files.
• rm -i
• Always ask for user confirm.
• rm –r dir1 dir2 dir3
• Removes the given directories with all their contents
• rm –f
• Force the remove, no questions asked
Website: www.nxnvision.com Email: info@nxnvision.com Phone: +91 98407 84107
67. Creating and removing directories
• Create directories
– mkdir dir1 dir2 dir3
• Creates directories with the given names.
• Remove directories
– rmdir dir1 dir2 dir3
• Removes the given directories
– Safe: only works when directories and empty.
– Alternative: rm -r, (doesn't need empty directories).
– rm –rf <dir>
• Deletes files/directories without asking.
• SHOULD BE USED WITH EXTREME CARE!
Website: www.nxnvision.com Email: info@nxnvision.com Phone: +91 98407 84107
68. File contents display
• Several ways of displaying the contents of files:
cat file1 file2 file3
• Concatenates and outputs the contents of the given files
more file1 file2 file3
• After each page, asks the user to hit a key to continue
• Can also jump to the first occurrence of a keyword (/ command)
less file1 file2 file3
• Does more than more with less
• Doesn't read the whole file before starting
• Supports backward movement in the file (w)
Website: www.nxnvision.com Email: info@nxnvision.com Phone: +91 98407 84107
69. File contents display - partial
• head [<n>] <file>
• Displays the first <n> lines (or 10 by default) of the given file.
• Doesn't have to open the whole file to do this!
• tail [<n>] <file>
• Displays the last <n> lines (or 10 by default) of the given file.
• No need to load the whole file in RAM! Very useful for huge files.
• tail –f <file>
• Displays the last 10 lines of the given file and continues to display new
lines when they are appended to the file.
• Very useful to follow the changes in a log file
Website: www.nxnvision.com Email: info@nxnvision.com Phone: +91 98407 84107
70. Search – grep command
• Format: grep <pattern> <files>
• Scans the given files and displays the lines which match the given
pattern.
• grep error *.log
– Displays all the lines containing error in the *.log files
• grep –i error *.log
– Same, but case insensitive
• grep –ri error .
– Same, but recursively in all the files in . and its subdirectories
• grep –v info *.log
– Outputs all the lines in the files except those containing info.
Website: www.nxnvision.com Email: info@nxnvision.com Phone: +91 98407 84107
71. Ordering – sort command
• Format: sort <file>
– Sorts the lines in the given file in character order and outputs them.
• sort -r <file>
– Same, but in reverse order
• sort –ru <file>
– u: unique. Same, but just outputs identical lines once
Website: www.nxnvision.com Email: info@nxnvision.com Phone: +91 98407 84107
72. Linux - Standard I/O
• Linux provides standard facilities for using Input and Output on Linux
terminals
• There is no difference between reading the input from command-line
or a file, or for that matter writing output
• The Linux standard I/O has three components
– Standard Output - stdout
– Standard Input - stdin
– Standard Error - stderr
Website: www.nxnvision.com Email: info@nxnvision.com Phone: +91 98407 84107
73. Standard Output
• All the commands that give text output on the terminal, do it by writing
it to the standard output.
– Standard output can be written (redirected) to a file using the > symbol
• Creates a new file
ls –la ./ > folder_list.txt
– Standard output can be appended to an existing file using the >> symbol
cat file1 > bigfile
cat file2 >> bigfile
cat file3 >> bigfile
• The above will generate a file, bigfile, in which all three files will present in the
order, file1:file2:file3
Website: www.nxnvision.com Email: info@nxnvision.com Phone: +91 98407 84107
74. Standard Input
• Some commands, when not given input arguments, can take their input
from standard input.
• Try this:
sort
windows
linux
[Ctrl][D]
linux
windows
– sort takes its input from the standard input
– in this case, what you type in the terminal and ended by [Ctrl][d]
• sort < namelist.txt
– The standard input of sort is taken from the given file.
Website: www.nxnvision.com Email: info@nxnvision.com Phone: +91 98407 84107
75. Standard Error
• Error messages are usually output (if the program is well written) to
standard error instead of standard output
• Standard error can be redirected through 2> or 2>>
• Example:
cat file1 file2 nofile > newfile 2> errfile
– Note: 1 is the descriptor for standard output, so 1> is equivalent to >
• Can redirect both standard output and standard error to the same file
using ‘&>’
cat f1 f2 nofile &> wholefile
Website: www.nxnvision.com Email: info@nxnvision.com Phone: +91 98407 84107
76. Pipes
• Linux pipes are very useful to redirect the standard output of a
command to the standard input of another one.
• Examples
cat *.log | grep –i error | sort
grep -ri error . | grep –v “ignored”
| sort u > serious_errors.log
cat /home/*/homework.txt | grep mark
| more
• This one of the most powerful features in Linux shells!
Website: www.nxnvision.com Email: info@nxnvision.com Phone: +91 98407 84107
78. More Linux Shell commands (2)
• who
• which
• whoami
• date
• time
• script
• bc
Website: www.nxnvision.com Email: info@nxnvision.com Phone: +91 98407 84107
79. Command - echo
• Displays the given text on the screen
• Format: echo [OPTION]... [STRING]...
-n do not output the trailing newline
-e enable interpretation of backslash escapes
-E disable interpretation of backslash escapes (default)
• If -e is in effect, the following sequences are recognized:
backslash
b backspace
c suppress trailing newline
n new line
r carriage return
t horizontal tab
Website: www.nxnvision.com Email: info@nxnvision.com Phone: +91 98407 84107
80. Environment Variables
• Environment variables are global settings that control the function of
the shell and other Linux programs
• They are sometimes referred to global shell variables.
• Examples of setting:
VAR=/home/fred/doc
export TERM=ansi
SYSTEMNAME=`uname -n`
• Using Environment Variables:
echo $VAR
cd $VAR
cd $HOME
echo “You are running on $SYSTEMNAME”
• Displaying - use the following commands:
set (displays local & env. Vars)
export
Website: www.nxnvision.com Email: info@nxnvision.com Phone: +91 98407 84107
81. Some Important Environment Variables
• HOME
– Your home directory (often be abbreviated as “~”)
• TERM
– The type of terminal you are running (for example vt100, xterm, and ansi)
• PWD
– Current working directory
• PATH
– List of directories to search for commands
Website: www.nxnvision.com Email: info@nxnvision.com Phone: +91 98407 84107
82. PATH Environment Variable
• Controls where commands are found
– PATH is a list of directory pathnames separated by colons. For example:
PATH=/bin:/usr/bin:/usr/X11R6/bin:/usr/local/bin:/home/
scully/bin
– If a command does not contain a slash, the shell tries finding the
command in each directory in PATH. The first match is the command that
will run
• Usually set in /etc/profile as global to all
• Local settings modified in ~/.profile
Website: www.nxnvision.com Email: info@nxnvision.com Phone: +91 98407 84107
83. Command – gzip
• Compression/decompression utility for files
• gzip compresses files and gunzip uncompresses files
• Each file is compressed individually
• Format: gzip [OPTIONS] [-S suffix] [file …]
-d --decompress decompress
-f --force force overwrite of output file and compress links
-l --list list compressed file contents
-q --quiet suppress all warnings
-r --recursive operate recursively on directories
-v --verbose verbose mode
file... files to (de)compress. If none given, use standard input.
Website: www.nxnvision.com Email: info@nxnvision.com Phone: +91 98407 84107
84. Command - tar
• Compression/decompression utility for files
• gzip compresses files and gunzip uncompresses files
• All files go into a single archive while compressing
• Format: tar [OPTION...] target [FILE]...
-c, --create create a new archive
-x, --extract, --get extract files from an archive
-p, --preserve-permissions, --same-permissions extract information about
file permissions (default for superuser)
-f, --file=ARCHIVE use archive file or device ARCHIVE
-j, --bzip2 filter the archive through bzip2
-z, --gzip, --gunzip, --ungzip filter the archive through gzip
-Z, --compress, --uncompress filter the archive through compress
-v, --verbose verbosely list files processed
-t, --list list the contents of an archive
-u, --update only append files newer than copy in archive
Website: www.nxnvision.com Email: info@nxnvision.com Phone: +91 98407 84107
85. tar
• Examples
tar -cf file.tar f1 f2 # Create file.tar from files foo
and bar
tar -tvf file.tar # List all files in archive.tar
verbosely
tar -xf file.tar # Extract all files from archive.tar
tar -czf file.tar f1 f2 # Create file.tar from files foo
and bar using gzip
tar -cjf file.tar f1 f2 # Create file.tar from files foo
and bar using bzip
tar -cvf file.tar f1 f2 # Create file.tar from files foo
and bar, verbose
Website: www.nxnvision.com Email: info@nxnvision.com Phone: +91 98407 84107
86. Command - ln
• ln creates symbolic reference to existing file
• Softlink is just a reference to an existing file
• Hardlink is a physical copy of an existing file
• Removing a link does not affect the original file
• To create softlink
ln –s <target_file> <link_name>
ln –s <target_dir> <link_name>
• To create hardlink
ln <target_file> <link_name>
ln <target_dir> <link_name>
• To remove a link
rm <link_name>
Website: www.nxnvision.com Email: info@nxnvision.com Phone: +91 98407 84107
88. Command - link
• link command is almost same as ln
• Format:
link src-file link-file
• Deleting the link file has no effect on the source file
Website: www.nxnvision.com Email: info@nxnvision.com Phone: +91 98407 84107
89. Command - find
• Searches for a file in the directory hierarchy
• Format:
– find [-H] [-L] [-P] [path...] [expression]
• Examples:
find . -name “*.pdf”
Lists all the *.pdf files in the current (.) directory or subdirectories. You
need the double quotes to prevent the shell from expanding the *
character.
find docs -name "*.pdf"
Finds all the *.pdf files in the docs directory
find / -name "*.pdf"
Finds all the *.pdf files starting from root folder
Website: www.nxnvision.com Email: info@nxnvision.com Phone: +91 98407 84107
90. Command - cut
• Used to select parts of file(s) and display on the standard output
• Format: cut [OPTION]... [FILE]...
• Main options
-b select only these bytes
-c select only these characters
-d use DELIM instead of TAB for field delimiter
-f select only these fields
• You can use one, and only one option from -b, -c or -f.
N N'th byte, character or field, counted from 1
N- from N'th byte, character or field, to end of line
N-M from N'th to M'th (included) byte, character or field
-M from first to M'th (included) byte, character or field
Website: www.nxnvision.com Email: info@nxnvision.com Phone: +91 98407 84107
91. • Examples:
cut –b5-10 file.txt (Displays bytes 5-10 of each line of file.txt)
cut –c-10 file.txt (Displays first 10 of each line of file.txt)
cut –d ‘ ‘ –f2 (Displays the text between 1st and 2nd space character
in file.txt)
Website: www.nxnvision.com Email: info@nxnvision.com Phone: +91 98407 84107
92. Command pg
• Paginates the file selected, for viewing one screen full at a time
• Format:
– pg [-number] [-p string] [-cefnrs] [+ linenumber] [+/ pattern /] [filename]...
• Important options:
-number – window size in lines
+linenumber – start display at <linenumber>
+/pattern/ - start display at first instance of /pattern/
filename – file to be displayed, can be several
n – a number will take you the nth screen
Website: www.nxnvision.com Email: info@nxnvision.com Phone: +91 98407 84107
93. Command - tr
• Translate, squeeze, and/or delete characters from standard input,
writing to standard output.
• Format: tr [OPTION]... SET1 [SET2]
• Main options:
-d delete characters in SET1, do not translate
-s replace each input sequence of a repeated character that
is listed in SET1 with a single occurrence of that character
• SETs are sequences of characters, and the following sequences are
recognized:
backslash
b backspace
c suppress trailing newline
n new line
r carriage return
t horizontal tab
Website: www.nxnvision.com Email: info@nxnvision.com Phone: +91 98407 84107
94. Examples
• cat file0.txt | tr –s ‘ ’
• removes multiple spaces and replaces by single space
• cat file0.txt | tr –s ‘ n’
• removes multiple spaces and newlines, and replaces by single space and
newline, respectively
Website: www.nxnvision.com Email: info@nxnvision.com Phone: +91 98407 84107
95. Command - diff
• Shows differences between two files or folders, line by line
• Format: diff [OPTION]... FILES
• Main options
-i --ignore-case Ignore case differences in file contents.
-b --ignore-space-change Ignore changes in the amount of white
space.
-w --ignore-all-space Ignore all white space.
-B --ignore-blank-lines Ignore changes whose lines are all blank.
-a --text Treat all files as text.
-q --brief Output only whether files differ.
--suppress-common-lines Do not output common lines.
-r --recursive Recursively compare any subdirectories found.
-s --report-identical-files Report when two files are the same
-i --ignore-case Ignore case differences in file contents.
Website: www.nxnvision.com Email: info@nxnvision.com Phone: +91 98407 84107
96. Examples
• diff file0.txt file1.txt
• Shows line by line difference
• diff –r folder1 folder2
• Shows line by line differences, in same files in the two folders
• diff –bB file0.txt file1.txt
• Shows the differences, while ignoring all whitespaces and blank lines
Website: www.nxnvision.com Email: info@nxnvision.com Phone: +91 98407 84107
97. Command - cmp
• Compares two files, byte by byte
• Format:
cmp [OPTION]... FILE1 [FILE2 [SKIP1 [SKIP2]]]
• Main options
-b --print-bytesPrint differing bytes.
-i SKIP --ignore-initial=SKIP Skip the first SKIP bytes of input.
-i SKIP1:SKIP2 --ignore-initial=SKIP1:SKIP2 Skip the first SKIP1 bytes of
FILE1 and the first SKIP2 bytes of FILE2.
-l --verbose Output byte numbers and values of all differing bytes.
-n LIMIT --bytes=LIMIT Compare at most LIMIT bytes.
-s --quiet --silent Output nothing; yield exit status only.
Website: www.nxnvision.com Email: info@nxnvision.com Phone: +91 98407 84107
98. Examples
• cmp file0.txt file1.txt
• Compares the two files and shows where the 1st difference occurs
• cmp -b file0.txt file1.txt
• Compares the two files and shows where the 1st difference occurs, and
prints the differing bytes
Website: www.nxnvision.com Email: info@nxnvision.com Phone: +91 98407 84107
99. Command - who
• Shows who is logged on
• Format:
who [OPTION]... [ FILE | ARG1 ARG2 ]
• Main options:
-H, --heading print line of column headings
-l, --login print system login processes
-m only hostname and user associated with stdin
-p, --process print active processes spawned by init
-q, --count all login names and number of users logged on
-r, --runlevel print current runlevel
-u, --users list users logged in
Website: www.nxnvision.com Email: info@nxnvision.com Phone: +91 98407 84107
100. Command - which
• Displays the full path of shell commands but only if the command is
present in the system path
• Format:
which <progname>
Website: www.nxnvision.com Email: info@nxnvision.com Phone: +91 98407 84107
101. Command - date
• Prints the system date and time
• Can also update it
• Format
date [OPTION]... [+FORMAT]
date [-u|--utc|--universal] [MMDDhhmm[[CC]YY][.ss]]
• Main options
-d, --date=STRING display time described by STRING, not `now'
-r, --reference=FILE display the last modification time of FILE
-s, --set=STRING set time described by STRING
-u, --utc, --universal print or set Coordinated Universal Time
Website: www.nxnvision.com Email: info@nxnvision.com Phone: +91 98407 84107
102. Examples
• date -d "11/20/2003 12:48:00“
• Displays date as Thu Dec 23 00:00:00 IST 2010
• date -s "11/20/2003 12:48:00“
• Sets system date as Thu Dec 23 00:00:00 IST 2010
• date -r file0.txt
• Shows the last updated date and time of file0.txt
Website: www.nxnvision.com Email: info@nxnvision.com Phone: +91 98407 84107
103. Command - time
• Used for measuring time taken to execute a command or a sequence
of commands
• It shows the real time, user time and system time
• Format:
time [-p] utility [argument]...
• Examples:
time ls –la
• Shows the three times mentioned above, taken to execute ls –la
command
Website: www.nxnvision.com Email: info@nxnvision.com Phone: +91 98407 84107
104. Command - script
• The script utility makes a record of everything printed on your
screen. The record is written to filename. If no file name is given, the
record is saved in the file typescript.
• Format:
script [-a] [filename]
– if –a is provided with a filename the session is stored in filename
– If –a is not provided then the session is stored in typescript file
Website: www.nxnvision.com Email: info@nxnvision.com Phone: +91 98407 84107
105. Command - bc
• Text mode calculator
Website: www.nxnvision.com Email: info@nxnvision.com Phone: +91 98407 84107