Design of PVC Bladed Horizontal Axis Wind Turbine for Low Wind Speed RegionIJERA Editor
The Project is aimed at designing a wind turbine that can be able to build by Laypersons, using readily available material which is feasible & affordable to provide much needed electricity. Since most of the high wind power density regions in the zone of high wind speed are already being tapped by large scale wind turbine and so it required creating a large scope for the development of low wind speed turbines. Our study focuses primarily on designing the blade for tapping power in the regions of low wind power density. The aerodynamic profiles of wind turbine blades have major influence on aerodynamic efficiency of wind turbine. This can be achieved by comparing the effectiveness of a crude blade fashioned from a different Size, Material & standard of PVC drainage pipe which are easily available in market. It can be evaluated by performing experimental analysis, data collection & its evaluation on different type & size of PVC Pipe & preparing an analytical tool for best Design.
Design of PVC Bladed Horizontal Axis Wind Turbine for Low Wind Speed RegionIJERA Editor
The Project is aimed at designing a wind turbine that can be able to build by Laypersons, using readily available material which is feasible & affordable to provide much needed electricity. Since most of the high wind power density regions in the zone of high wind speed are already being tapped by large scale wind turbine and so it required creating a large scope for the development of low wind speed turbines. Our study focuses primarily on designing the blade for tapping power in the regions of low wind power density. The aerodynamic profiles of wind turbine blades have major influence on aerodynamic efficiency of wind turbine. This can be achieved by comparing the effectiveness of a crude blade fashioned from a different Size, Material & standard of PVC drainage pipe which are easily available in market. It can be evaluated by performing experimental analysis, data collection & its evaluation on different type & size of PVC Pipe & preparing an analytical tool for best Design.
Air Compression and Electricity Generation by Using Speed Breaker with Rack A...IJMER
On roads, speed breakers provided to control the speed of traffic in rushed areas. The
potential energy in terms of weight of vehicle is loss on speed breaker can be utilized for useful
purposes. This paper describes the potential energy of such type of energy available on roads and its
utilization for useful work. The stages of development of a speed breaker device are described and the
mechanism to generate electricity using rack, pinion and speed increasing gear box and generator
and store compressed air with the help of piston cylinder compressor arrangement. Whenever the
vehicle is allowed to pass over the speed breaker dome, it gets pressed downwards. As the springs are
attached to the dome, they get compressed and the rack, which is attached to the bottom of the dome,
moves down in reciprocating motion. Since rack has teeth connected to pinion there is conversion of
reciprocating motion of rack in to rotary motion of pinion, but the two gears rotate in opposite
direction. So that shafts will rotate with certain RPM these shafts are connected through a belt drive
to the generators, which converts the mechanical energy into electrical energy. The rack is attached
to piston rod of cylinder so downward stroke of rack we can use for air compression in reservoir, with
help of piston cylinder arrangement. Simultaneously reciprocating piston cylinder arrangement
compresses the air and stores it in the reservoir. We can use the generated electricity and compressed
air for different purpose
Wind turbines form complex nonlinear mechanical systems exposed to uncontrolled wind
profiles. This makes turbine controller design a challenging task. As such, control of wind energy
conversion systems (WECS) is difficult due to the lack of systematic methods to identify requisite
robust and sufficiently stable conditions, to guarantee performance. The problem becomes more
complex when plant parameters become uncertain. This paper considers the wind energy curtailment
for which it provides a combinatorial planning model to maximize wind power utilization. The major
objective of this study is to develop an effective method for optimizing size of wind. A novel multiobjective
adaptation of the fuzzy based Harmony Search algorithm is proposed and tested for
efficiently solving the problem of optimally deploying wind turbines in wind farms. In this paper,
Harmony Search Algorithm (HSA) using fuzzy controller to achieve better optimization results and to
increase performance. A general formulation of this algorithm is presented together with an analytical
and mathematical modeling to solve the stability and performance of the system.
Using position control to improve the efficiency of wind turbineTELKOMNIKA JOURNAL
Wind energy is one of the renewable energies that can be using to generate electricity. Increasing demand for this type of renewable energy for sustainability and accessibility. Environmentally as it does not cause any pollution in addition to the abundance of required equipment and lessmaintenance and long operation life of its parts despite the high cost of the system at its installation but at long term, become cheaper. Wind power generators depend on their operation on wind speed and direction. Therefore,it should be installing in places where the wind speed is adequate and sufficient to rotate its rotor, it knows that wind speed is variable in its speed and direction they change every hour and every season. In this design, many practical and theoretical (simulation) experiments have been done which will be mentioned and explained in details in this research shows that this mechanism raises the efficiency of wind power generators by 80% when the rotor of the wind turbine directed towards the wind than if they were fixed direction.
Air Compression and Electricity Generation by Using Speed Breaker with Rack A...IJMER
On roads, speed breakers provided to control the speed of traffic in rushed areas. The
potential energy in terms of weight of vehicle is loss on speed breaker can be utilized for useful
purposes. This paper describes the potential energy of such type of energy available on roads and its
utilization for useful work. The stages of development of a speed breaker device are described and the
mechanism to generate electricity using rack, pinion and speed increasing gear box and generator
and store compressed air with the help of piston cylinder compressor arrangement. Whenever the
vehicle is allowed to pass over the speed breaker dome, it gets pressed downwards. As the springs are
attached to the dome, they get compressed and the rack, which is attached to the bottom of the dome,
moves down in reciprocating motion. Since rack has teeth connected to pinion there is conversion of
reciprocating motion of rack in to rotary motion of pinion, but the two gears rotate in opposite
direction. So that shafts will rotate with certain RPM these shafts are connected through a belt drive
to the generators, which converts the mechanical energy into electrical energy. The rack is attached
to piston rod of cylinder so downward stroke of rack we can use for air compression in reservoir, with
help of piston cylinder arrangement. Simultaneously reciprocating piston cylinder arrangement
compresses the air and stores it in the reservoir. We can use the generated electricity and compressed
air for different purpose
Wind turbines form complex nonlinear mechanical systems exposed to uncontrolled wind
profiles. This makes turbine controller design a challenging task. As such, control of wind energy
conversion systems (WECS) is difficult due to the lack of systematic methods to identify requisite
robust and sufficiently stable conditions, to guarantee performance. The problem becomes more
complex when plant parameters become uncertain. This paper considers the wind energy curtailment
for which it provides a combinatorial planning model to maximize wind power utilization. The major
objective of this study is to develop an effective method for optimizing size of wind. A novel multiobjective
adaptation of the fuzzy based Harmony Search algorithm is proposed and tested for
efficiently solving the problem of optimally deploying wind turbines in wind farms. In this paper,
Harmony Search Algorithm (HSA) using fuzzy controller to achieve better optimization results and to
increase performance. A general formulation of this algorithm is presented together with an analytical
and mathematical modeling to solve the stability and performance of the system.
Using position control to improve the efficiency of wind turbineTELKOMNIKA JOURNAL
Wind energy is one of the renewable energies that can be using to generate electricity. Increasing demand for this type of renewable energy for sustainability and accessibility. Environmentally as it does not cause any pollution in addition to the abundance of required equipment and lessmaintenance and long operation life of its parts despite the high cost of the system at its installation but at long term, become cheaper. Wind power generators depend on their operation on wind speed and direction. Therefore,it should be installing in places where the wind speed is adequate and sufficient to rotate its rotor, it knows that wind speed is variable in its speed and direction they change every hour and every season. In this design, many practical and theoretical (simulation) experiments have been done which will be mentioned and explained in details in this research shows that this mechanism raises the efficiency of wind power generators by 80% when the rotor of the wind turbine directed towards the wind than if they were fixed direction.
Immunizing Image Classifiers Against Localized Adversary Attacksgerogepatton
This paper addresses the vulnerability of deep learning models, particularly convolutional neural networks
(CNN)s, to adversarial attacks and presents a proactive training technique designed to counter them. We
introduce a novel volumization algorithm, which transforms 2D images into 3D volumetric representations.
When combined with 3D convolution and deep curriculum learning optimization (CLO), itsignificantly improves
the immunity of models against localized universal attacks by up to 40%. We evaluate our proposed approach
using contemporary CNN architectures and the modified Canadian Institute for Advanced Research (CIFAR-10
and CIFAR-100) and ImageNet Large Scale Visual Recognition Challenge (ILSVRC12) datasets, showcasing
accuracy improvements over previous techniques. The results indicate that the combination of the volumetric
input and curriculum learning holds significant promise for mitigating adversarial attacks without necessitating
adversary training.
Sachpazis:Terzaghi Bearing Capacity Estimation in simple terms with Calculati...Dr.Costas Sachpazis
Terzaghi's soil bearing capacity theory, developed by Karl Terzaghi, is a fundamental principle in geotechnical engineering used to determine the bearing capacity of shallow foundations. This theory provides a method to calculate the ultimate bearing capacity of soil, which is the maximum load per unit area that the soil can support without undergoing shear failure. The Calculation HTML Code included.
Industrial Training at Shahjalal Fertilizer Company Limited (SFCL)MdTanvirMahtab2
This presentation is about the working procedure of Shahjalal Fertilizer Company Limited (SFCL). A Govt. owned Company of Bangladesh Chemical Industries Corporation under Ministry of Industries.
NO1 Uk best vashikaran specialist in delhi vashikaran baba near me online vas...Amil Baba Dawood bangali
Contact with Dawood Bhai Just call on +92322-6382012 and we'll help you. We'll solve all your problems within 12 to 24 hours and with 101% guarantee and with astrology systematic. If you want to take any personal or professional advice then also you can call us on +92322-6382012 , ONLINE LOVE PROBLEM & Other all types of Daily Life Problem's.Then CALL or WHATSAPP us on +92322-6382012 and Get all these problems solutions here by Amil Baba DAWOOD BANGALI
#vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore#blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #blackmagicforlove #blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #Amilbabainuk #amilbabainspain #amilbabaindubai #Amilbabainnorway #amilbabainkrachi #amilbabainlahore #amilbabaingujranwalan #amilbabainislamabad
Student information management system project report ii.pdfKamal Acharya
Our project explains about the student management. This project mainly explains the various actions related to student details. This project shows some ease in adding, editing and deleting the student details. It also provides a less time consuming process for viewing, adding, editing and deleting the marks of the students.
Final project report on grocery store management system..pdfKamal Acharya
In today’s fast-changing business environment, it’s extremely important to be able to respond to client needs in the most effective and timely manner. If your customers wish to see your business online and have instant access to your products or services.
Online Grocery Store is an e-commerce website, which retails various grocery products. This project allows viewing various products available enables registered users to purchase desired products instantly using Paytm, UPI payment processor (Instant Pay) and also can place order by using Cash on Delivery (Pay Later) option. This project provides an easy access to Administrators and Managers to view orders placed using Pay Later and Instant Pay options.
In order to develop an e-commerce website, a number of Technologies must be studied and understood. These include multi-tiered architecture, server and client-side scripting techniques, implementation technologies, programming language (such as PHP, HTML, CSS, JavaScript) and MySQL relational databases. This is a project with the objective to develop a basic website where a consumer is provided with a shopping cart website and also to know about the technologies used to develop such a website.
This document will discuss each of the underlying technologies to create and implement an e- commerce website.
Saudi Arabia stands as a titan in the global energy landscape, renowned for its abundant oil and gas resources. It's the largest exporter of petroleum and holds some of the world's most significant reserves. Let's delve into the top 10 oil and gas projects shaping Saudi Arabia's energy future in 2024.
About
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Technical Specifications
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
Key Features
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface
• Compatible with MAFI CCR system
• Copatiable with IDM8000 CCR
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
Application
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Hybrid optimization of pumped hydro system and solar- Engr. Abdul-Azeez.pdffxintegritypublishin
Advancements in technology unveil a myriad of electrical and electronic breakthroughs geared towards efficiently harnessing limited resources to meet human energy demands. The optimization of hybrid solar PV panels and pumped hydro energy supply systems plays a pivotal role in utilizing natural resources effectively. This initiative not only benefits humanity but also fosters environmental sustainability. The study investigated the design optimization of these hybrid systems, focusing on understanding solar radiation patterns, identifying geographical influences on solar radiation, formulating a mathematical model for system optimization, and determining the optimal configuration of PV panels and pumped hydro storage. Through a comparative analysis approach and eight weeks of data collection, the study addressed key research questions related to solar radiation patterns and optimal system design. The findings highlighted regions with heightened solar radiation levels, showcasing substantial potential for power generation and emphasizing the system's efficiency. Optimizing system design significantly boosted power generation, promoted renewable energy utilization, and enhanced energy storage capacity. The study underscored the benefits of optimizing hybrid solar PV panels and pumped hydro energy supply systems for sustainable energy usage. Optimizing the design of solar PV panels and pumped hydro energy supply systems as examined across diverse climatic conditions in a developing country, not only enhances power generation but also improves the integration of renewable energy sources and boosts energy storage capacities, particularly beneficial for less economically prosperous regions. Additionally, the study provides valuable insights for advancing energy research in economically viable areas. Recommendations included conducting site-specific assessments, utilizing advanced modeling tools, implementing regular maintenance protocols, and enhancing communication among system components.