Hardware back panel-port
•Download as PPTX, PDF•
2 likes•1,288 views
This document describes the various ports located on the back panel of a computer. It details 14 common ports including: power supply port, keyboard/mouse ports, audio ports, network port, video ports, and legacy ports for parallel devices and SCSI. Each port is explained in terms of its function and common uses.
Report
Share
Report
Share
Recommended
Phoenix Framework
José Valim, creator of @elixirlang, and @elixirphoenix team member presents Phoenix Framework during 10th #pivorak Lviv Ruby MeetUp
Assembly Language Lecture 1
The document discusses assembly language instruction addressing and execution. It covers loading an *.exe program by accessing it from disk and storing it in memory segments. The boot process and loading of an *.exe file is explained. Examples are provided to illustrate instruction execution and addressing, showing how the instruction address is determined from segment registers and offsets.
Floating point ALU using VHDL implemented on FPGA
Description: An arithmetic unit based on IEEE754 single precision standard for floating point numbers has been targeted to implement on Spartan-6 XC6SLX45 FPGA Board. The hardware description language used to program the FPGA chip was VHDL (very high speed integrated circuit hardware description language). The arithmetic unit implemented has a 32- bit processing unit which allowed limited arithmetic operations such as addition, Subtraction, multiplication and division. The overall coding style used was behavioural modelling synthesis and simulations were done and observed in Xilinx 14.7 and modelsim SE 6.4 version respectively. The final outcome of project revealed that proposed arithmetic unit was able to handle maximum frequency of 126.004 MHz (i.e. Minimum period of 7.936ns).
Assembly Language Basics
This document outlines the basics of assembly language, including basic elements, statements, program data, variables, constants, instructions, translation to assembly language, and program structure. It discusses statement syntax, valid names, operation and operand fields. It also covers common instructions like MOV, ADD, SUB, INC, DEC, and NEG. Finally, it discusses program segments, memory models, and how to define the data, stack, and code segments.
Microprocessor lab manual
The document describes a lab experiment on addition of two 8-bit numbers using an 8085 microprocessor. It includes:
1) An algorithm that initializes the carry to zero, loads the two 8-bit numbers into registers, adds the numbers and checks for carry, increments the carry if needed, and stores the result.
2) The assembly language program with labels, mnemonics, hex codes and comments to implement the algorithm.
3) Inputs, outputs and results with and without carry from adding sample 8-bit numbers.
Control Word
This presentation discusses control words for programming the ports of an 8255A integrated circuit. There are two types of control words: mode control words and bit set/reset control words. Mode control words are used to tell the device what mode the ports should operate in, such as setting port B as a mode 1 input and port A as a mode 0 output. An example is provided of constructing a mode control word with the binary value 8E hexadecimal to initialize an 8255A chip with specific port configurations. The IN and OUT instructions are also summarized for reading from and writing to ports in either fixed or variable port formats.
1.7. eqivalence of nfa and dfa
The document discusses the conversion of non-deterministic finite automata (NFA) to deterministic finite automata (DFA). It states that an NFA with epsilon transitions can first be converted to an NFA without epsilon transitions, which can then be converted to an equivalent DFA. The conversion of NFA to DFA involves constructing a DFA with up to 2^n states for an n-state NFA, with the same input alphabet and transition and acceptance functions based on the NFA. Examples are provided of converting epsilon NFAs to NFAs without epsilon transitions and NFAs to equivalent DFAs.
Seven segment interfacing with 8051.pdf
This document discusses interfacing a 7-segment display with an 8051 microcontroller. There are two common types of 7-segment displays - common cathode and common anode. An 8051, 7-segment display, 2-4 decoder, transistors, and power supply are needed. Lookup tables store the segment patterns for digits 0-9 depending on the display type. Assembly code samples show how to display digits on one or four 7-segment displays by selecting the correct display using a 2-4 decoder connected to ports on the 8051.
Recommended
Phoenix Framework
José Valim, creator of @elixirlang, and @elixirphoenix team member presents Phoenix Framework during 10th #pivorak Lviv Ruby MeetUp
Assembly Language Lecture 1
The document discusses assembly language instruction addressing and execution. It covers loading an *.exe program by accessing it from disk and storing it in memory segments. The boot process and loading of an *.exe file is explained. Examples are provided to illustrate instruction execution and addressing, showing how the instruction address is determined from segment registers and offsets.
Floating point ALU using VHDL implemented on FPGA
Description: An arithmetic unit based on IEEE754 single precision standard for floating point numbers has been targeted to implement on Spartan-6 XC6SLX45 FPGA Board. The hardware description language used to program the FPGA chip was VHDL (very high speed integrated circuit hardware description language). The arithmetic unit implemented has a 32- bit processing unit which allowed limited arithmetic operations such as addition, Subtraction, multiplication and division. The overall coding style used was behavioural modelling synthesis and simulations were done and observed in Xilinx 14.7 and modelsim SE 6.4 version respectively. The final outcome of project revealed that proposed arithmetic unit was able to handle maximum frequency of 126.004 MHz (i.e. Minimum period of 7.936ns).
Assembly Language Basics
This document outlines the basics of assembly language, including basic elements, statements, program data, variables, constants, instructions, translation to assembly language, and program structure. It discusses statement syntax, valid names, operation and operand fields. It also covers common instructions like MOV, ADD, SUB, INC, DEC, and NEG. Finally, it discusses program segments, memory models, and how to define the data, stack, and code segments.
Microprocessor lab manual
The document describes a lab experiment on addition of two 8-bit numbers using an 8085 microprocessor. It includes:
1) An algorithm that initializes the carry to zero, loads the two 8-bit numbers into registers, adds the numbers and checks for carry, increments the carry if needed, and stores the result.
2) The assembly language program with labels, mnemonics, hex codes and comments to implement the algorithm.
3) Inputs, outputs and results with and without carry from adding sample 8-bit numbers.
Control Word
This presentation discusses control words for programming the ports of an 8255A integrated circuit. There are two types of control words: mode control words and bit set/reset control words. Mode control words are used to tell the device what mode the ports should operate in, such as setting port B as a mode 1 input and port A as a mode 0 output. An example is provided of constructing a mode control word with the binary value 8E hexadecimal to initialize an 8255A chip with specific port configurations. The IN and OUT instructions are also summarized for reading from and writing to ports in either fixed or variable port formats.
1.7. eqivalence of nfa and dfa
The document discusses the conversion of non-deterministic finite automata (NFA) to deterministic finite automata (DFA). It states that an NFA with epsilon transitions can first be converted to an NFA without epsilon transitions, which can then be converted to an equivalent DFA. The conversion of NFA to DFA involves constructing a DFA with up to 2^n states for an n-state NFA, with the same input alphabet and transition and acceptance functions based on the NFA. Examples are provided of converting epsilon NFAs to NFAs without epsilon transitions and NFAs to equivalent DFAs.
Seven segment interfacing with 8051.pdf
This document discusses interfacing a 7-segment display with an 8051 microcontroller. There are two common types of 7-segment displays - common cathode and common anode. An 8051, 7-segment display, 2-4 decoder, transistors, and power supply are needed. Lookup tables store the segment patterns for digits 0-9 depending on the display type. Assembly code samples show how to display digits on one or four 7-segment displays by selecting the correct display using a 2-4 decoder connected to ports on the 8051.
Context free grammar
The document provides information about context free grammar (CFG). It defines a CFG as G=(V,T,P,S) where V is the set of nonterminals, T is the set of terminals, P is the set of production rules, and S is the start symbol. Examples of CFGs are provided. Derivation trees, which show the derivation of strings from a CFG, are also discussed. The key differences between regular grammars and CFGs are summarized. Methods for minimizing CFGs by removing useless symbols, epsilon productions, and unit productions are outlined.
8086 memory segmentation
Introduction of memory Segmentation
Segmentation is the process in which the main memory of the computer is logically divided into different segments and each segment has its own base address.
Memory segmentation is the methods where whole memory is divided into the smaller parts called segments of various sizes.
A segment is just an area in memory.
The process of dividing memory this way is called segmentation.
Combinational circuit
This document discusses combinational circuits. It defines a combinational circuit as a circuit whose output depends only on the current input levels and not previous states. Combinational circuits do not use memory. The document lists three categories of combinational circuits: arithmetic and logical functions, data transmission, and code conversion. It provides adder circuits as examples, defining a half adder and full adder, and including their truth tables.
Addressing modes
This document discusses assembly language programming. It provides an overview of assembly language, how it relates to machine language, and how assemblers are used to convert assembly code into machine-readable object code. It also describes the basic components of assembly language instructions, including opcodes and operands, and different addressing modes for specifying operands in memory or registers. Common addressing modes like immediate, register, direct, register indirect, and based indexed modes are defined through examples.
8255 programming
This document discusses programming the 8255 programmable peripheral interface chip. It provides 5 programs with steps to interface keys and displays, read inputs and write outputs, and set and clear bits on Port C. It explains calculating port addresses, initializing control words, and using read and write instructions. It also describes using a delay loop subroutine and calculating time delays for milliseconds. The document reviews important concepts and asks additional practice questions.
Interrupts
This document discusses interrupts, which are unexpected hardware-initiated subroutine calls that temporarily suspend program execution. There are different types of interrupts, including external, internal, software, and hardware interrupts. Interrupts are used for input/output data transfers with peripheral devices, emergency situations, event-driven programs, and real-time applications. When an interrupt occurs, the processor's status is saved and it branches to an interrupt service routine to handle the interrupt before returning to the main program.
Data structure using c++
This document outlines the syllabus for Computer Science (41) taught by Prof. K. Adisesha. It covers 4 units: Unit A discusses computer hardware components and data structures; Unit B covers object-oriented programming in C++; Unit C focuses on databases, queries, and large data; Unit D examines advanced communication technology concepts like networking and web design. Key topics include motherboards, Boolean algebra, arrays, stacks, queues, classes, inheritance, pointers, files, SQL, networks, and HTML.
Embedded C - Optimization techniques
Coming up with optimized C program for Embedded Systems consist of multiple challenges. This presentation talks about various methods about optimizing C programs in Embedded environment. It also has some interesting tips, Do's and Dont's that will offer practical help for an Embedded programmer.
Microprocessor lab
The document contains programs to perform addition, subtraction, multiplication, and division of two 8-bit numbers using the 8085 microprocessor. It also contains a program to find the largest number in an array. For each program, it provides the aim, algorithm, program code, input/output observations, and confirms that the program was successfully executed.
Instruction formats-in-8086
The document describes the instruction formats of the 8086 microprocessor. It has 1-6 byte instruction sizes with an opcode field in the first byte. The second byte contains mode, register, and register/memory fields that specify operands. It defines register codes and explains how the mode, register, and register/memory fields are used to determine operands and effective addresses. Examples show how to encode instructions like MOV, SUB, and ADD using the instruction format. Input/output instructions like IN and OUT are also described, indicating how port numbers can be immediate values or specified with the DX register.
Stacks & subroutines 1
The document discusses stacks, subroutines, and the 8085 microprocessor. It provides the following key points:
1. The stack is an area of memory used for temporary storage of information in LIFO (last in first out) order, growing backwards into memory with the stack pointer register defining the bottom.
2. Subroutines allow groups of instructions to be called from different locations to avoid repetition. The 8085 uses CALL to redirect execution to a subroutine and RTE to return to the calling routine.
3. Data can be passed to subroutines through registers or memory locations. Proper subroutines only enter at the start and exit at the end, with a single entry point
Interrupts and types of interrupts
This method of checking the signal in the system for processing is called Polling Method. In this method, the problem is that the processor has to waste number of clock cycles just for checking the signal in the system, by this processor will become busy unnecessarily. If any signal came for the process, processor will take some time to process the signal due to the polling process in action. So system performance also will be degraded and response time of the system will also decrease.
Two’s complement
Two's complement representation allows binary arithmetic on signed integers to yield the correct results. Positive numbers are represented as simple binary, while negative numbers are the binary complement of the corresponding positive number. The most significant bit indicates the sign, with 0 being positive and 1 being negative. To calculate the two's complement of a number, invert and add 1 to its binary representation. Two's complement arithmetic follows the same rules as binary arithmetic. Overflow occurs when adding two numbers of the same sign yields a result with the opposite sign.
8086 assembly
1) The document is an introduction to 8086 assembly language and provides information on 8086 architecture including registers, memory access, variables, arrays, and instructions like MOV.
2) It explains the main components of a computer like the CPU, RAM, and system bus and describes the different types of registers in the 8086 including general purpose, segment, and special purpose registers.
3) The tutorial provides examples of using directives, variables, memory addressing modes, and instructions like MOV to demonstrate basic 8086 programming concepts.
T-states in microprocessor 8085
The document provides information about microprocessors and the 8085 microprocessor. It defines key terms like microprocessor, ALU, registers, control unit, bus, machine cycle, T-state, instruction cycle, fetch cycle, execute cycle, flags, memory mapping, opcode fetch, interrupts, polling, and interrupt types. It describes the basic units and operations of a microprocessor, bus types, the instruction execution process, and interrupt handling. It also discusses I/O techniques, 8085 pins and signals, addressing modes, and differences between memory mapped and I/O mapped I/O.
minimization the number of states of DFA
This document discusses minimizing the number of states in a deterministic finite automaton (DFA). It begins with an introduction to DFAs, defining their components. It then explains that states can be redundant and provides an example of two equivalent DFAs where one state is unnecessary. The task of DFA minimization is to automatically transform a given DFA into an equivalent state-minimized DFA. An algorithm for DFA minimization is described that works by partitioning states into groups based on whether their transitions lead to the same groups for each input symbol, and merging states that are not distinct. Examples are provided to illustrate the algorithm. In conclusion, it notes that DFA minimization is useful for applications like regular expression matching and compiler optimizations, and that the
Instruction Set of 8086 Microprocessor
instruction set of 8086 microprocessor has following categories:
-Data transfer instructions
-Arithmetic instructions
-Logical instructions
-Flag manipulation instructions
-shift and rotate instructions
-String instructions
-8086 assembler directives
INTERCONNECTION STRUCTURE
This document discusses computer interconnection structures and components. It summarizes that a computer consists of modules like the CPU, memory, and I/O that communicate with each other. The connections between these modules is called the interconnection structure. The design of this structure depends on the exchanges needed between the modules. It then provides more details on the memory module, I/O module, and CPU and how they are connected and transfer data and instructions through the bus interconnection.
Signal descriptors of 8086
The document discusses the signal description of the 8086 microprocessor. It describes that the 8086 has 40 pins and can operate at 5, 8, or 10 MHz clock speeds. It operates in single or multiprocessor configurations. Some pins have different functions depending on whether it is in minimum or maximum mode. The document then lists the various signals, their abbreviations, and briefly describes the purpose of several important pins including CLK, RESET, VCC, GND, INTA, ALE, HLDA, DT/R and DEN.
Karnaugh Graph or K-Map
The document provides an introduction to Karnaugh maps (K-maps), which are a graphical method for simplifying Boolean logic expressions. It outlines the basics of K-maps, including their advantages, different types (2, 3, 4 and 5 variable maps), and how to group cells and derive simplified logic expressions. The document also discusses sum-of-products (SOP) form, product-of-sums (POS) form, don't care conditions, prime implicants, and includes examples of mapping truth tables to K-maps and simplifying expressions.
Motherboard Components
The document provides an overview of the main components of a computer motherboard and how they work together. It discusses the motherboard, CPU, RAM, ROM, expansion slots and boot process. The motherboard holds the processor, memory chips, input/output chips and expansion slots. It connects the components and allows them to communicate via a data bus. The CPU executes instructions from RAM and uses RAM for data processing. Expansion slots allow additional peripherals to connect to the motherboard. The boot process starts the computer and loads the operating system.
Output device
This document is a presentation on output devices submitted by M. Baqar Zaidi to Miss Sabika. It defines output devices as any device that outputs information from a computer. It discusses various types of output devices including monitors, printers, plotters, speakers, fax machines, internet telephony, and multifunctional devices. For each type of output device, it provides detailed definitions and examples of specific models like CRT monitors, LCD monitors, laser printers, inkjet printers, and dot matrix printers.
More Related Content
What's hot
Context free grammar
The document provides information about context free grammar (CFG). It defines a CFG as G=(V,T,P,S) where V is the set of nonterminals, T is the set of terminals, P is the set of production rules, and S is the start symbol. Examples of CFGs are provided. Derivation trees, which show the derivation of strings from a CFG, are also discussed. The key differences between regular grammars and CFGs are summarized. Methods for minimizing CFGs by removing useless symbols, epsilon productions, and unit productions are outlined.
8086 memory segmentation
Introduction of memory Segmentation
Segmentation is the process in which the main memory of the computer is logically divided into different segments and each segment has its own base address.
Memory segmentation is the methods where whole memory is divided into the smaller parts called segments of various sizes.
A segment is just an area in memory.
The process of dividing memory this way is called segmentation.
Combinational circuit
This document discusses combinational circuits. It defines a combinational circuit as a circuit whose output depends only on the current input levels and not previous states. Combinational circuits do not use memory. The document lists three categories of combinational circuits: arithmetic and logical functions, data transmission, and code conversion. It provides adder circuits as examples, defining a half adder and full adder, and including their truth tables.
Addressing modes
This document discusses assembly language programming. It provides an overview of assembly language, how it relates to machine language, and how assemblers are used to convert assembly code into machine-readable object code. It also describes the basic components of assembly language instructions, including opcodes and operands, and different addressing modes for specifying operands in memory or registers. Common addressing modes like immediate, register, direct, register indirect, and based indexed modes are defined through examples.
8255 programming
This document discusses programming the 8255 programmable peripheral interface chip. It provides 5 programs with steps to interface keys and displays, read inputs and write outputs, and set and clear bits on Port C. It explains calculating port addresses, initializing control words, and using read and write instructions. It also describes using a delay loop subroutine and calculating time delays for milliseconds. The document reviews important concepts and asks additional practice questions.
Interrupts
This document discusses interrupts, which are unexpected hardware-initiated subroutine calls that temporarily suspend program execution. There are different types of interrupts, including external, internal, software, and hardware interrupts. Interrupts are used for input/output data transfers with peripheral devices, emergency situations, event-driven programs, and real-time applications. When an interrupt occurs, the processor's status is saved and it branches to an interrupt service routine to handle the interrupt before returning to the main program.
Data structure using c++
This document outlines the syllabus for Computer Science (41) taught by Prof. K. Adisesha. It covers 4 units: Unit A discusses computer hardware components and data structures; Unit B covers object-oriented programming in C++; Unit C focuses on databases, queries, and large data; Unit D examines advanced communication technology concepts like networking and web design. Key topics include motherboards, Boolean algebra, arrays, stacks, queues, classes, inheritance, pointers, files, SQL, networks, and HTML.
Embedded C - Optimization techniques
Coming up with optimized C program for Embedded Systems consist of multiple challenges. This presentation talks about various methods about optimizing C programs in Embedded environment. It also has some interesting tips, Do's and Dont's that will offer practical help for an Embedded programmer.
Microprocessor lab
The document contains programs to perform addition, subtraction, multiplication, and division of two 8-bit numbers using the 8085 microprocessor. It also contains a program to find the largest number in an array. For each program, it provides the aim, algorithm, program code, input/output observations, and confirms that the program was successfully executed.
Instruction formats-in-8086
The document describes the instruction formats of the 8086 microprocessor. It has 1-6 byte instruction sizes with an opcode field in the first byte. The second byte contains mode, register, and register/memory fields that specify operands. It defines register codes and explains how the mode, register, and register/memory fields are used to determine operands and effective addresses. Examples show how to encode instructions like MOV, SUB, and ADD using the instruction format. Input/output instructions like IN and OUT are also described, indicating how port numbers can be immediate values or specified with the DX register.
Stacks & subroutines 1
The document discusses stacks, subroutines, and the 8085 microprocessor. It provides the following key points:
1. The stack is an area of memory used for temporary storage of information in LIFO (last in first out) order, growing backwards into memory with the stack pointer register defining the bottom.
2. Subroutines allow groups of instructions to be called from different locations to avoid repetition. The 8085 uses CALL to redirect execution to a subroutine and RTE to return to the calling routine.
3. Data can be passed to subroutines through registers or memory locations. Proper subroutines only enter at the start and exit at the end, with a single entry point
Interrupts and types of interrupts
This method of checking the signal in the system for processing is called Polling Method. In this method, the problem is that the processor has to waste number of clock cycles just for checking the signal in the system, by this processor will become busy unnecessarily. If any signal came for the process, processor will take some time to process the signal due to the polling process in action. So system performance also will be degraded and response time of the system will also decrease.
Two’s complement
Two's complement representation allows binary arithmetic on signed integers to yield the correct results. Positive numbers are represented as simple binary, while negative numbers are the binary complement of the corresponding positive number. The most significant bit indicates the sign, with 0 being positive and 1 being negative. To calculate the two's complement of a number, invert and add 1 to its binary representation. Two's complement arithmetic follows the same rules as binary arithmetic. Overflow occurs when adding two numbers of the same sign yields a result with the opposite sign.
8086 assembly
1) The document is an introduction to 8086 assembly language and provides information on 8086 architecture including registers, memory access, variables, arrays, and instructions like MOV.
2) It explains the main components of a computer like the CPU, RAM, and system bus and describes the different types of registers in the 8086 including general purpose, segment, and special purpose registers.
3) The tutorial provides examples of using directives, variables, memory addressing modes, and instructions like MOV to demonstrate basic 8086 programming concepts.
T-states in microprocessor 8085
The document provides information about microprocessors and the 8085 microprocessor. It defines key terms like microprocessor, ALU, registers, control unit, bus, machine cycle, T-state, instruction cycle, fetch cycle, execute cycle, flags, memory mapping, opcode fetch, interrupts, polling, and interrupt types. It describes the basic units and operations of a microprocessor, bus types, the instruction execution process, and interrupt handling. It also discusses I/O techniques, 8085 pins and signals, addressing modes, and differences between memory mapped and I/O mapped I/O.
minimization the number of states of DFA
This document discusses minimizing the number of states in a deterministic finite automaton (DFA). It begins with an introduction to DFAs, defining their components. It then explains that states can be redundant and provides an example of two equivalent DFAs where one state is unnecessary. The task of DFA minimization is to automatically transform a given DFA into an equivalent state-minimized DFA. An algorithm for DFA minimization is described that works by partitioning states into groups based on whether their transitions lead to the same groups for each input symbol, and merging states that are not distinct. Examples are provided to illustrate the algorithm. In conclusion, it notes that DFA minimization is useful for applications like regular expression matching and compiler optimizations, and that the
Instruction Set of 8086 Microprocessor
instruction set of 8086 microprocessor has following categories:
-Data transfer instructions
-Arithmetic instructions
-Logical instructions
-Flag manipulation instructions
-shift and rotate instructions
-String instructions
-8086 assembler directives
INTERCONNECTION STRUCTURE
This document discusses computer interconnection structures and components. It summarizes that a computer consists of modules like the CPU, memory, and I/O that communicate with each other. The connections between these modules is called the interconnection structure. The design of this structure depends on the exchanges needed between the modules. It then provides more details on the memory module, I/O module, and CPU and how they are connected and transfer data and instructions through the bus interconnection.
Signal descriptors of 8086
The document discusses the signal description of the 8086 microprocessor. It describes that the 8086 has 40 pins and can operate at 5, 8, or 10 MHz clock speeds. It operates in single or multiprocessor configurations. Some pins have different functions depending on whether it is in minimum or maximum mode. The document then lists the various signals, their abbreviations, and briefly describes the purpose of several important pins including CLK, RESET, VCC, GND, INTA, ALE, HLDA, DT/R and DEN.
Karnaugh Graph or K-Map
The document provides an introduction to Karnaugh maps (K-maps), which are a graphical method for simplifying Boolean logic expressions. It outlines the basics of K-maps, including their advantages, different types (2, 3, 4 and 5 variable maps), and how to group cells and derive simplified logic expressions. The document also discusses sum-of-products (SOP) form, product-of-sums (POS) form, don't care conditions, prime implicants, and includes examples of mapping truth tables to K-maps and simplifying expressions.
What's hot (20)
Viewers also liked
Motherboard Components
The document provides an overview of the main components of a computer motherboard and how they work together. It discusses the motherboard, CPU, RAM, ROM, expansion slots and boot process. The motherboard holds the processor, memory chips, input/output chips and expansion slots. It connects the components and allows them to communicate via a data bus. The CPU executes instructions from RAM and uses RAM for data processing. Expansion slots allow additional peripherals to connect to the motherboard. The boot process starts the computer and loads the operating system.
Output device
This document is a presentation on output devices submitted by M. Baqar Zaidi to Miss Sabika. It defines output devices as any device that outputs information from a computer. It discusses various types of output devices including monitors, printers, plotters, speakers, fax machines, internet telephony, and multifunctional devices. For each type of output device, it provides detailed definitions and examples of specific models like CRT monitors, LCD monitors, laser printers, inkjet printers, and dot matrix printers.
The North Face Final Deck
The document summarizes the features of a North Face backpack, including large mesh pockets, a main compartment, laminated back panel, side water bottle pockets, and a front compartment organizer. It then discusses the target market for the backpack as outdoor sports enthusiasts and students ages 17-25, positioning the backpack as providing security, relaxation, and confidence during expeditions due to an innovative back panel and GORE-TEX waterproof fabric. It also mentions a North Face backpack with wheels and store coupons for additional savings when purchasing at Dick's Sporting Goods.
1.2 motherboard form factor
The document discusses different motherboard form factors including ATX, Micro ATX, Flex ATX, NLX, and BTX. It provides details on the size and key features of each form factor. For example, it states that ATX motherboards measure 305x244x10mm while Micro ATX measures 244x244x10mm. It also explains that newer form factors like BTX were designed for better airflow and easier component access compared to older styles like AT.
Motherboard components
The document discusses the key components of a motherboard and their functions. It describes the central processing unit socket, power connectors, memory slots, video card slot, expansion slots, BIOS chip, CMOS battery, keyboard and mouse connectors, hard disk and floppy disk connectors, jumpers, northbridge and southbridge chips, front and rear panel connectors, and random access memory. The motherboard integrates all hardware components, allows communication between parts, and provides power distribution.
All About Motherboard
This document provides an overview of motherboards, including their components, form factors, connectors, manufacturers, and troubleshooting tips. It discusses the main components of a motherboard like the CPU socket, chipset, memory slots, and BIOS. It covers the most common form factors for desktop motherboards like ATX, BTX, and NLX. The document also lists some major motherboard manufacturers such as Intel, Asus, Gigabyte, MSI, and ASRock. Finally, it provides some basic troubleshooting steps for common motherboard issues like checking connectors and ensuring the CPU, heatsink, and fan are properly installed and free of debris.
Motherboard and its components
The document discusses the main components of a computer motherboard. It describes the CPU socket, memory slots, CMOS battery, expansion slots like ISA, PCI, and AGP, power connectors, chipset including the northbridge and southbridge, graphical devices, and back panel ports. The motherboard holds many crucial electronic components like the CPU and memory and provides connections for other peripherals.
Motherboard
The document discusses the motherboard, which connects and controls the main components inside a computer. It provides basic information about motherboards, including their components and functions. The history section notes that early computers housed the CPU, memory, and peripherals on separate boards, while modern motherboards integrate many functions onto a single circuit board, supporting audio, video, storage, and networking.
Motherboard components and their functions
The document describes and explains the key components found on a computer motherboard and their functions. It discusses 17 main components including: back panel connectors and ports; PCI and PCIe slots; the northbridge and southbridge chips; the CPU socket; power connectors; SATA connectors; RAM slots; and fan headers. Each component's purpose and location on the motherboard is outlined.
Introduction to Motherboard
This presentation provides an overview of motherboard components and functions. It describes the main components including the CPU socket, memory slots, chipset, BIOS, expansion slots, and input/output ports. It explains that the motherboard connects the central processing unit and other internal components to enable communication within the computer. Form factors like ATX and microATX determine the motherboard size and compatibility. Selecting a motherboard involves considering the CPU, case, expansion needs and warranty.
Presentation on output device
This document provides an overview of different types of computer output devices. It begins by defining an output device as an electromechanical device that accepts data from a computer and translates it into a form suitable for users. Output is classified as either soft-copy, which is temporary, or hard-copy, which provides permanent output. The document then describes various output devices including monitors, printers, plotters, projectors, and voice response systems. It provides details on the purpose and functioning of each type of output device.
Viewers also liked (11)
Similar to Hardware back panel-port
1.2 i o interface
This document discusses various ports and connectors used in computing. It describes common motherboard ports like PS/2, serial, parallel, VGA, DVI, USB, LAN and modem ports. It provides details on connectors for these ports and example devices that can be connected to each port. It also covers external ports and connectors like FireWire, HDMI and mini-DINs. The document includes questions to test the reader's understanding of ports and connectors.
VP1920.pdf
The ATEN VP1920 is a 3-in-1 presentation switch that integrates a video matrix switch, audio processor, and analog to digital converter. It has 9 multi-format inputs and 2 HDMI outputs, allowing flexible interface conversion. It streamlines control and reduces system complexity. The VP1920 is suitable for small to medium sized corporate and education presentation environments.
Introduction To Fusion Widescreen 01
The document introduces the Barco FSN Series multi-format video production switchers. It provides an overview of the FSN Series and its ability to integrate HD, SD, computer and graphical sources. It then describes the various components, including the control panels, chassis, cards and applications.
A+ computer hardware slide
This document provides an overview of various computer hardware components and concepts. It discusses motherboards, CPUs, memory, storage devices, input/output devices, networking, power supplies, troubleshooting techniques, and more. Specific topics covered include different types of motherboards, CPUs, RAM, hard drives, printers, monitors, keyboards, mice, and other common computer parts. It also explains concepts like digital vs analog electronics, binary numbering systems, and computer troubleshooting procedures.
Identification of ports & cables adapter cards
This document summarizes various computer ports, cables, adapters, and cards. It describes input ports like DIN, PS/2, game port, and power supply ports. It also outlines output ports such as serial ports, parallel ports, and power supply ports. Communication links such as USB, FireWire, Bluetooth, RJ45, RJ-11, and BNC connectors are defined. Finally, common adapter cards like video cards, TV tuner cards, network interface cards, modems, sound cards, and SCSI adapter cards are explained at a high level.
Raspberry pi presentation.pptx
This document provides a diagram and labels for the main hardware components of the Raspberry Pi including:
- The 40 GPIO pins used for general input/output
- Four USB ports for connecting devices like keyboards or storage
- An HDMI port for video output
- An Ethernet port for internet connectivity
- A micro SD card slot for storage
- A camera module connector and display ribbon connector
The diagram labels the central processing unit, power management chips, and other core internal components of the Raspberry Pi.
Electronics & computing - All connectors
This document provides a menu of different types of computer connectors. It lists connectors for audio/video, buses, cartridges/expansions, cellular phones, memories, miscellaneous devices, networks, parallel, PC, power supply, serial, storage, and input devices. Each connector type has multiple specific connectors listed with descriptions. It directs the user to a tutorial for more information on what the listed connectors mean.
Electronica & pc's todos los conectores (spanish) by porru
This document provides a menu of different types of computer and electronics connectors. It lists categories for Audio/Video, Buses, Cartridges/Expansions, Cellular Phones, Memories, Miscellaneous, Networks, Parallel, PC, Power Supply, Serial, Storage, and Mice/Keyboards/Joysticks. Under each category it lists specific connector types and provides a link to more information about each connector. The purpose is to provide an overview and reference for the various connectors covered on the site.
A000067-datasheet.pdf
The Arduino Mega 2560 is a development board with an ATmega2560 microcontroller running at 16MHz. It has 54 digital input/output pins, 16 analog inputs, 4 UARTs, a USB connection, and power jack. The board is well-suited for extensive applications like robotics and 3D printing due to its powerful processor and large number of I/O pins.
Programmable Rf Attenuation Project
This is a presentation created to illustrate work performed on programmable RF attenuation to assess capabilities of new cellular WIFI/UMA capable handsets
Digital Signage Advertising Media Player BKV59MSU_Datasheet
Digital Signage Advertising Media Player BKV59MSU, powered by a MSTAR microchip MSTV59MS, is an affordable digital signage media player solution offered by BITKIO Corp, a smart device solutions company.
Raspberry pi
The Raspberry Pi is a small, low-cost computer that can connect to a keyboard, mouse and monitor. It runs Linux and allows users to explore programming through languages like Scratch and Python. The Raspberry Pi has GPIO pins that enable controlling electronic components for physical computing projects. It comes in different models that vary in processing power, memory and connectivity options. Python's RPi.GPIO module allows controlling the GPIO pins to take sensor input and drive outputs. Code examples demonstrate setting pin modes, reading/writing pin values and using an IR sensor for obstacle avoidance.
Introduction to Arduino
Course: Introduction of Engineering and Design
Faculty: School of Electrical Engineering and Informatics
Version: 2016
VIA EPIA-P910-A Front I/O extender card
Hardware manual the Front I/O extender card for our popular EPIA-P910 quad-core x86 Pico-ITX board.
Get them at
http://www.viaembeddedstore.com/boards/x86-boards/via-epia-p910-10q-pico-itx.html
Dante AVIO Adapters Datasheet
Four types of Dante AVIO Adapters are available, including one- and two-channel versions of the analog input and analog output adapters.
More details visit: http://www.tm-systems.com.au/products/dante-avio-adaptors/
Dante AVIO Adapters Datasheet
Four types of Dante AVIO Adapters are available, including one- and two-channel versions of the analog input and analog output adapters.
Dante Avio Adapters
This document describes Media Networking Technology's Dante AVIO adapters which allow various audio equipment to be connected to a Dante audio network. The Dante AVIO adapters come in analog input/output, AES3, and USB versions to interface legacy audio gear with a Dante network. The adapters are plug-and-play, rugged for touring use, and provide high quality audio streaming and synchronization over the Dante network standard.
Xtrem n p1960t
This document describes the Xtrem-nP1960TP2E industrial panel computers. It has a 19-inch display, Intel Core i5 processor, expansion slots, front accessible USB ports, metal housing, and IP66 rating for harsh environments. Key features include various processor, memory, storage, and port options. It supports fieldbus modules and has wide operating temperature and vibration resistance suitable for industrial applications.
Embedded application development
The document discusses several embedded application development platforms including Arduino, Raspberry Pi, Tiva C Series, and MSP430. It provides overview information on each platform, including key components, features, programming languages supported, and examples of applications. For Arduino, it describes the Arduino Uno board in detail. For Raspberry Pi, it outlines the basic specifications and components. For Tiva C Series and MSP430, it summarizes the development boards and features of the microcontrollers.
2014 09 12 Dia Programador Session Materials
Materiales utilizados durante el evento virtual del día del programador en córdoba. Trata temas como USB Hacking, desarrollo de apps con Leap Motion, trabajo con Arduinos, Kinect V2, reconocimiento facial, y desarrollo de apps para Lego Mindstorms EV3
Similar to Hardware back panel-port (20)
Electronica & pc's todos los conectores (spanish) by porru
Electronica & pc's todos los conectores (spanish) by porru
Digital Signage Advertising Media Player BKV59MSU_Datasheet
Digital Signage Advertising Media Player BKV59MSU_Datasheet
Hardware back panel-port
- 1. Back Panel Connector Port
- 2. Back Panel • merupakan kumpulan port yang biasanya diletakkan di belakang casing atau wadah komputer PC
- 3. Back Panel Port AC Power Plug PS/2 Keyboard Port S/PDIF Out Port Serial Port USB Port Microphone Port Line In Port PS/2 Mouse Port Pararel Port IEEE1394 Port LAN (RJ45) Port Line In Port Video Graphics Adapter Port DVI Port
- 4. AC Kabel Power AC Power Plug PS/2 Keyboard Port S/PDIF Out Port Serial Port USB Port Microphone Port Line In Port PS/2 Mouse Port Pararel Port IEEE1394 Port LAN (RJ45) Port Line In Port Video Graphics Adapter Port DVI Port Digunakan untuk memberi supply tegangan pada power supply MENU BACK PANEL
- 5. PS/2 Keyboard Port AC Power Plug PS/2 Keyboard Port S/PDIF Out Port Serial Port USB Port Microphone Port Line In Port PS/2 Mouse Port Pararel Port IEEE1394 Port LAN (RJ45) Port Line In Port Video Graphics Adapter Port DVI Port MENU BACK PANEL
- 6. S/PDFI Out Put Port AC Power Plug PS/2 Keyboard Port S/PDIF Out Port Serial Port USB Port Microphone Port Line In Port PS/2 Mouse Port Pararel Port IEEE1394 Port LAN (RJ45) Port Line In Port Video Graphics Adapter Port DVI Port digunakan untuk menghubungkan komputer dengan periferal audio seperti home theatre MENU BACK PANEL
- 7. Serial Port AC Power Plug PS/2 Keyboard Port S/PDIF Out Port Serial Port USB Port Microphone Port Line In Port PS/2 Mouse Port Pararel Port IEEE1394 Port LAN (RJ45) Port Line In Port Video Graphics Adapter Port DVI Port digunakan untuk memasang periferal kecepatan rendah dengan mode transfer data serial. Namun saat ini jarang digunakan. MENU BACK PANEL
- 8. USB Port AC Power Plug PS/2 Keyboard Port S/PDIF Out Port Serial Port USB Port Microphone Port Line In Port PS/2 Mouse Port Pararel Port IEEE1394 Port LAN (RJ45) Port Line In Port Video Graphics Adapter Port DVI Port digunakan untuk antarmuka dengan periferal atau peralatan eksternal generasi baru yang menggantikan port paralel dan Serial. MENU BACK PANEL
- 9. Microphone Port AC Power Plug PS/2 Keyboard Port S/PDIF Out Port Serial Port USB Port Microphone Port Line In Port PS/2 Mouse Port Pararel Port IEEE1394 Port LAN (RJ45) Port Line In Port Video Graphics Adapter Port DVI Port MENU BACK PANEL
- 10. Line In Port AC Power Plug PS/2 Keyboard Port S/PDIF Out Port Serial Port USB Port Microphone Port Line In Port PS/2 Mouse Port Pararel Port IEEE1394 Port LAN (RJ45) Port Line In Port Video Graphics Adapter Port DVI Port MENU BACK PANEL
- 11. PS/2 Mouse Port AC Power Plug PS/2 Keyboard Port S/PDIF Out Port Serial Port USB Port Microphone Port Line In Port PS/2 Mouse Port Pararel Port IEEE1394 Port LAN (RJ45) Port Line In Port Video Graphics Adapter Port DVI Port MENU BACK PANEL
- 12. Parallel Port AC Power Plug PS/2 Keyboard Port S/PDIF Out Port Serial Port USB Port Microphone Port Line In Port PS/2 Mouse Port Pararel Port IEEE1394 Port LAN (RJ45) Port Line In Port Video Graphics Adapter Port DVI Port untuk memasang periferal kecepatan rendah dengan lebar data delapan bit. Biasanya digunakan untuk memasang printer sebelum generasi USB MENU BACK PANEL
- 13. IEEE1394 Port AC Power Plug PS/2 Keyboard Port S/PDIF Out Port Serial Port USB Port Microphone Port Line In Port PS/2 Mouse Port Pararel Port IEEE1394 Port LAN (RJ45) Port Line In Port Video Graphics Adapter Port DVI Port untuk menghubungkan peralatan eksternal kecepatan tinggi seperti video capture atau streaming video. MENU BACK PANEL
- 14. LAN (RJ45) Port AC Power Plug PS/2 Keyboard Port S/PDIF Out Port Serial Port USB Port Microphone Port Line In Port PS/2 Mouse Port Pararel Port IEEE1394 Port LAN (RJ45) Port Line In Port Video Graphics Adapter Port DVI Port MENU BACK PANEL digunakan untuk menghubungkan komputer dengan jaringan LAN
- 15. Line In Port AC Power Plug PS/2 Keyboard Port S/PDIF Out Port Serial Port USB Port Microphone Port Line In Port PS/2 Mouse Port Pararel Port IEEE1394 Port LAN (RJ45) Port Line In Port Video Graphics Adapter Port DVI Port MENU BACK PANEL
- 16. Video Graphics Adapter Port AC Power Plug PS/2 Keyboard Port S/PDIF Out Port Serial Port USB Port Microphone Port Line In Port PS/2 Mouse Port Pararel Port IEEE1394 Port LAN (RJ45) Port Line In Port Video Graphics Adapter Port DVI Port MENU BACK PANEL
- 17. DVI Port AC Power Plug PS/2 Keyboard Port S/PDIF Out Port Serial Port USB Port Microphone Port Line In Port PS/2 Mouse Port Pararel Port IEEE1394 Port LAN (RJ45) Port Line In Port Video Graphics Adapter Port DVI Port Digital Visual Interfaces MENU BACK PANEL