Groschopp 50106 specsheet
•
0 likes•50 views
This document provides specifications for a small PM 6013 motor with a 12V DC voltage, 2750 RPM speed, and 15:1 ratio gearbox. The motor has a rating of 183.3 RPM speed, 14.9 lb-in torque, and 47.3% system efficiency. It also lists start/stall conditions of 21.88 amps current and 81.42 lb-in torque. Charts show torque, speed, efficiency, and temperature performance. The motor is sold and serviced by Electromate.
Report
Share
Report
Share
Download to read offline
Recommended
Groschopp 50105 specsheet
This document provides specifications for a small DC motor including its voltage, speed, gearbox ratio, output speed, torque, current draw, efficiency ratings, start/stall conditions, and speed-torque and efficiency curves. Key details are the motor runs at 12V DC and 2750 rpm, has a 10:1 gearbox, outputs 275 rpm and 9.9 lb-in of torque, and has a maximum efficiency of 47.4% overall. Performance data is provided across a range of torque and speed values.
Groschopp 50107 specsheet
This document provides specifications for a PM 6013 motor with a 12V DC voltage, 2750 RPM speed, and 20:1 ratio PS 1900 gearbox. Key specifications include an output speed of 137.5 RPM, torque of 18.3 lb-in, current of 5.5 amps, and power output of 30 watts. The motor has a continuous duty cycle and efficiency of 61.1% for the motor alone and 43.6% for the overall system. Start/stall conditions are listed as 21.88 amps current and 111.51 lb-in torque. Performance charts show torque, speed, RPM, and efficiency at varying loads.
Groschopp 50109 specsheet
The document provides specifications for a PM 6013 12V DC motor with a 1900 gearbox and 45:1 ratio. Key specifications include a no-load speed of 2750 rpm, loaded speed of 61.1 rpm, torque of 32.6 lb-in, and efficiencies of 56.6% for the gearbox and 34.5% for the system. Performance curves show torque and efficiency at varying speeds from 0 to 225 rpm. The motor is sold and serviced by Electromate.
Groschopp 50115 specsheet
This document provides specifications for a PM 6013 24v DC motor with a 15:1 ratio gearbox. Key specifications include a no-load speed of 2650 rpm, rated speed of 177 rpm, torque of 16.1 lb-in, and efficiencies of 78% for the gearbox, 66% for the motor, and 51.5% for the overall system. Start/stall conditions are listed as 12.4 amps current and 99.4 lb-in torque. Speed and efficiency curves are provided for torque ranges from 0-200 lb-in.
Groschopp 50129 specsheet
The document provides specifications for a PM 6013 motor with a 30:1 ratio gearbox. It operates at 90V DC with an output speed of 84.4 rpm, torque of 26.5 lb-in, and power of 27 watts. The motor has a continuous duty cycle and efficiency of 61.9% for the motor alone and 41.4% for the combined motor and gearbox system. Startup requires 3.76 amps of current and generates 229.57 lb-in of torque. Performance curves are provided showing speed, torque, and efficiency over a range of loads.
Groschopp 50125 specsheet
This document provides specifications for a PM 6013 motor with a 5:1 ratio gearbox. The motor runs on 90V DC with a no-load speed of 2550 rpm. It has a rated speed of 506.6 rpm, torque of 5.4 lb-in, current of 0.73 amps, and power output of 32 watts or 0.0435 horsepower. The gearbox efficiency is 81.8%, motor efficiency is 61.9%, and system efficiency is 50.7%. Startup requires 3.76 amps and 39.89 lb-in of torque. Performance curves show torque and efficiency over speed.
Groschopp 50112 specsheet
This document provides specifications for a PM 6013 12V DC motor with a 1900:1 ratio gearbox. Key specifications include a no-load speed of 2750 RPM, rated speed of 22.9 RPM, torque of 83.2 lb-in, and efficiencies of 54.1% for the gearbox and 33% for the system. Performance curves are provided showing torque, speed, efficiency at varying loads. The motor can operate continuously with start/stall conditions drawing 21.88 amps and producing 558.27 lb-in of torque.
Groschopp 50114 specsheet
This document provides specifications for a PM 6013 24V DC motor with a 10:1 ratio gearbox. Key specifications include a no load speed of 265.5 rpm, a torque of 10.8 lb-in, a current of 2.8 amps, and an output of 34 watts. The gearbox efficiency is 78.3%, the motor efficiency is 66%, and the system efficiency is 51.6%. Start/stall conditions are 12.4 amps current and 66.93 lb-in torque. Performance curves are provided showing torque, speed, rpm, and efficiency levels across a range of operating points.
Recommended
Groschopp 50105 specsheet
This document provides specifications for a small DC motor including its voltage, speed, gearbox ratio, output speed, torque, current draw, efficiency ratings, start/stall conditions, and speed-torque and efficiency curves. Key details are the motor runs at 12V DC and 2750 rpm, has a 10:1 gearbox, outputs 275 rpm and 9.9 lb-in of torque, and has a maximum efficiency of 47.4% overall. Performance data is provided across a range of torque and speed values.
Groschopp 50107 specsheet
This document provides specifications for a PM 6013 motor with a 12V DC voltage, 2750 RPM speed, and 20:1 ratio PS 1900 gearbox. Key specifications include an output speed of 137.5 RPM, torque of 18.3 lb-in, current of 5.5 amps, and power output of 30 watts. The motor has a continuous duty cycle and efficiency of 61.1% for the motor alone and 43.6% for the overall system. Start/stall conditions are listed as 21.88 amps current and 111.51 lb-in torque. Performance charts show torque, speed, RPM, and efficiency at varying loads.
Groschopp 50109 specsheet
The document provides specifications for a PM 6013 12V DC motor with a 1900 gearbox and 45:1 ratio. Key specifications include a no-load speed of 2750 rpm, loaded speed of 61.1 rpm, torque of 32.6 lb-in, and efficiencies of 56.6% for the gearbox and 34.5% for the system. Performance curves show torque and efficiency at varying speeds from 0 to 225 rpm. The motor is sold and serviced by Electromate.
Groschopp 50115 specsheet
This document provides specifications for a PM 6013 24v DC motor with a 15:1 ratio gearbox. Key specifications include a no-load speed of 2650 rpm, rated speed of 177 rpm, torque of 16.1 lb-in, and efficiencies of 78% for the gearbox, 66% for the motor, and 51.5% for the overall system. Start/stall conditions are listed as 12.4 amps current and 99.4 lb-in torque. Speed and efficiency curves are provided for torque ranges from 0-200 lb-in.
Groschopp 50129 specsheet
The document provides specifications for a PM 6013 motor with a 30:1 ratio gearbox. It operates at 90V DC with an output speed of 84.4 rpm, torque of 26.5 lb-in, and power of 27 watts. The motor has a continuous duty cycle and efficiency of 61.9% for the motor alone and 41.4% for the combined motor and gearbox system. Startup requires 3.76 amps of current and generates 229.57 lb-in of torque. Performance curves are provided showing speed, torque, and efficiency over a range of loads.
Groschopp 50125 specsheet
This document provides specifications for a PM 6013 motor with a 5:1 ratio gearbox. The motor runs on 90V DC with a no-load speed of 2550 rpm. It has a rated speed of 506.6 rpm, torque of 5.4 lb-in, current of 0.73 amps, and power output of 32 watts or 0.0435 horsepower. The gearbox efficiency is 81.8%, motor efficiency is 61.9%, and system efficiency is 50.7%. Startup requires 3.76 amps and 39.89 lb-in of torque. Performance curves show torque and efficiency over speed.
Groschopp 50112 specsheet
This document provides specifications for a PM 6013 12V DC motor with a 1900:1 ratio gearbox. Key specifications include a no-load speed of 2750 RPM, rated speed of 22.9 RPM, torque of 83.2 lb-in, and efficiencies of 54.1% for the gearbox and 33% for the system. Performance curves are provided showing torque, speed, efficiency at varying loads. The motor can operate continuously with start/stall conditions drawing 21.88 amps and producing 558.27 lb-in of torque.
Groschopp 50114 specsheet
This document provides specifications for a PM 6013 24V DC motor with a 10:1 ratio gearbox. Key specifications include a no load speed of 265.5 rpm, a torque of 10.8 lb-in, a current of 2.8 amps, and an output of 34 watts. The gearbox efficiency is 78.3%, the motor efficiency is 66%, and the system efficiency is 51.6%. Start/stall conditions are 12.4 amps current and 66.93 lb-in torque. Performance curves are provided showing torque, speed, rpm, and efficiency levels across a range of operating points.
Groschopp 62304 specsheet
The document provides specifications for a PM 6015 motor with a 115V voltage, 1300 rpm speed, and a PL 7300 30:1 ratio gearbox. The motor has a rating of 43.9 rpm, 18.2 lb-in of torque, and 0.47 amps of current. The gearbox, motor, and system efficiencies are 38.1%, 54.3%, and 20.7% respectively. Under start/stall conditions, the current is 1.54 amps and torque is 202.35 lb-in.
Groschopp 50121 specsheet
This document provides specifications for a PM 6013 24V DC motor with a PS 1900 120:1 ratio gearbox. Key specifications include a no-load speed of 2650 rpm, rated speed of 22.1 rpm, torque of 94.1 lb-in, and current of 2.8 amps. The motor has an efficiency of 66.0%, the gearbox 57.1%, and the overall system 37.7%. Start/stall conditions are 12.40 amps current and 679.58 lb-in torque. Performance curves show efficiency and torque over speed range. The motor and gearbox assembly is sold and serviced by Electromate.
Groschopp 50100 specsheet
This document provides specifications for a PM 6013 motor with a 60:1 ratio gearbox. The motor runs at 900 rpm and 12 V DC, with an output of 15.3 rpm and 55.5 lb-in of torque. Key specifications listed include current, output power, duty cycle, efficiency rates, start/stall conditions, and torque and speed curves. The motor and gearbox system are sold and serviced by Electromate.
Groschopp 50110 specsheet
This document provides specifications for a PM 6013 12V DC motor with a 60:1 ratio gearbox. Key specifications include a no load speed of 45.8 rpm, maximum torque of 43.0 lb-in, and maximum power output of 23 watts. The motor has an efficiency of 61.1% while the gearbox efficiency is 55.9% resulting in an overall system efficiency of 34.2%. Charts show torque and efficiency at varying speeds. The motor is sold and serviced by Electromate.
Groschopp 62405 specsheet
This document provides specifications for a PM 6015 motor with a 115V voltage, 1300 rpm speed, and 40:1 ratio RP 7300 gearbox. Key specifications include a 32.9 rpm speed, 35.4 lb-in torque, 0.47 amp current, and 30.1% system efficiency. Start/stall conditions are 1.54 amps current and 244.63 lb-in torque. Performance curves show torque, speed, efficiency at varying loads. The motor is sold and serviced by Electromate.
Groschopp 50132 specsheet
This document provides specifications for a PM 6013 motor with a 60:1 ratio gearbox. The motor runs on 90V DC with an output speed of 42.2 rpm, torque of 44.8 lb-in, and maximum efficiency of 61.9%. Performance curves are provided showing torque, speed, efficiency at varying loads. The motor has a continuous duty cycle and was manufactured by Groschopp.com.
Groschopp 50108 specsheet
This document provides specifications for a PM 6013 motor with a 12V DC voltage, 2750 RPM speed, and 30:1 ratio PS 1900 gearbox. Key specifications include a rated speed of 91.7 RPM, torque of 25.6 lb-in, current of 5.5 amps, and power output of 28 watts or 0.0372 HP. The gearbox efficiency is 66.6%, motor efficiency is 61.1%, and system efficiency is 40.7%. Start/stall conditions draw 21.88 amps and produce 158.53 lb-in of torque. Performance curves show torque and efficiency over a range of speeds.
Groschopp 50149 specsheet
This document provides specifications for a PM 6013 motor with a 40:1 ratio gearbox. Key specifications include a voltage of 130V DC, speed of 2450 rpm, output speed of 61.1 rpm, torque of 26.1 lb-in, and efficiencies of 54.1% for the gearbox and 57.3% for the motor. Performance curves are provided showing torque, speed, and efficiency over a range of operating conditions.
Groschopp 50117 specsheet
This document provides specifications for a PM 6013 24v DC motor with a 30:1 ratio gearbox. Key specifications include a no load speed of 88.5 rpm, torque of 27.7 lb-in, current of 2.8 amps, and power output of 29 watts. The motor has an efficiency of 66% and the gearbox has an efficiency of 67.3%, resulting in a system efficiency of 44.4%. Start/stall conditions are listed as 12.4 amps current and 196.29 lb-in torque. Performance curves are provided showing torque, speed, and efficiency at varying loads.
Groschopp 10336 specsheet
This document provides specifications for a PM 6015 motor with a 7.5:1 RA 3000T gearbox. Key specifications include a voltage of 90V DC, speed of 1600 rpm, output speed of 208.7 rpm, torque of 8.3 lb-in, current of 0.70 amps, and power output of 20 watts or 0.0273 horsepower. The gearbox efficiency is 51.9%, motor efficiency is 68%, and system efficiency is 35.3%. Start/stall conditions draw 2.33 amps and produce 47.13 lb-in of torque. Performance curves show efficiency and torque over a range of speeds.
Groschopp 50113 specsheet
This document provides specifications for a PM 6013 24V DC motor with a 5:1 ratio gearbox. Key specifications include a no-load speed of 531 rpm, a no-load current of 2.8 amps, a rated torque of 5.6 lb-in, and maximum efficiencies of 82.1% for the gearbox, 66% for the motor, and 54.2% for the overall system. Performance curves are provided showing torque, speed, and efficiency over a range of operating conditions.
Groschopp 50127 specsheet
This document provides specifications for a PM 6013 motor with a 15:1 ratio gearbox. The motor runs on 90V DC with a top speed of 2550 rpm. Key specifications include a rated speed of 168.9 rpm, torque of 15.4 lb-in, and current draw of 0.73 amps producing 31 watts of power. The gearbox and motor have efficiencies of 77.7% and 61.9% respectively, yielding a system efficiency of 48.1%. Startup requires 3.76 amps and generates 114.75 lb-in of torque. Performance curves show speed, torque, efficiency and rpm values over a range of torques from 0-180 lb-in.
Groschopp 50138 specsheet
This document provides specifications for a small electric motor. The motor runs on 115V, has a maximum speed of 2550 RPM, and is paired with a 20:1 ratio gearbox. Key specifications include a 127.5 RPM no-load speed, 13.1 lb-in of torque, and maximum efficiency of 35.2% for the combined motor-gearbox system. Performance curves show torque, speed, and efficiency over a range of loads. The motor is suitable for continuous duty applications.
Groschopp 50120 specsheet
This document provides specifications for a PM 6013 24V DC motor with a 2650 rpm speed and a PS 1900 90:1 ratio gearbox. Key specifications include a rated speed of 29.5 rpm, torque of 63.4 lb-in, current of 2.8 amps, and power output of 22 watts or 0.0297 horsepower. The gearbox efficiency is 51.3%, motor efficiency is 66%, and system efficiency is 33.8%. Start/stall conditions are 12.4 amps current and 568.73 lb-in torque. Performance curves show torque and efficiency over speed.
Groschopp 62305 specsheet
This document provides specifications for a PM 6015 motor with a 115V voltage, 1300 rpm speed, and 40:1 ratio PL 7300 gearbox. Key specifications include a 32.9 rpm speed, 41.5lb-in torque, 0.47 amp current, and 35.3% system efficiency. Start/stall conditions are listed as 1.54 amps current and 258.49 lb-in torque. Performance curves are provided for torque, speed, rpm, and efficiency. The motor and gearbox are sold and serviced by Electromate.
Groschopp 47754 specsheet
This document provides specifications for a 1 Ph 6540 TENV AC motor with a PS 1900 15:1 ratio gearbox. The motor runs at 3060 rpm single phase and 115v. Key specifications include an output speed of 203.8 rpm, torque of 10.9 lb-in, current of 0.62 amps, and power output of 26 watts or 0.0352 HP. Startup current is 1.32 amps with 9.63 lb-in of torque. Efficiency levels are provided for the gearbox, motor, and overall system at various torque and speed levels, with peak efficiencies of 74.6%, 49.4%, and 36.9%, respectively.
Groschopp 62306 specsheet
This document provides specifications for a PM 6015 motor with a 61:1 gearbox including details like voltage, speed, torque, efficiency and load characteristics. Key specs listed are a rated speed of 21.6 rpm, torque of 57.3 lb-in, and system efficiency of 32.0%. Performance charts show torque and efficiency at various speeds from 0-450 rpm. The motor and gearbox combination is intended for continuous duty applications.
Groschopp 50137 specsheet
This document provides specifications for a PM 6013 motor with a PS 1900 15:1 ratio gearbox. Key specifications include a voltage of 115V, speed of 2550 rpm, output speed of 170 rpm, torque of 10.8 lb-in, current of 0.52 amps, and power output of 22 watts. The motor has an efficiency of 52% while the gearbox is 74.6% efficient, resulting in a system efficiency of 38.8%. Charts show torque and speed performance as well as efficiency at varying torque levels.
Groschopp 50101 specsheet
This document provides specifications for a PM 6013 12V DC motor with a 90:1 ratio gearbox. Key specifications include a no-load speed of 10.2 rpm, maximum torque of 76.5lb-in, and maximum power output of 0.0123 HP. The motor has an efficiency of 51.9% while the gearbox efficiency is 55.3%, resulting in a system efficiency of 28.7%. Startup current and torque are 7.31 amps and 317.05 lb-in respectively. Performance curves show efficiency and torque output across a range of speeds.
Groschopp 62444 specsheet
This document provides specifications for a motor including its voltage, speed, gearbox ratio, rating, efficiency, start/stall conditions, and torque and speed curves. The motor runs at 115V and 2500 rpm with a 10:1 gearbox ratio. It has a rating of 245.2 rpm, 13.7 lb-in of torque, and 33.6% system efficiency. Under start/stall conditions it draws 7.18 amps and provides 221.19 lb-in of torque. Charts show the motor's torque and efficiency at varying speeds.
Groschopp 50104 specsheet
The document provides specifications for a PM 6013 12V DC motor with a 5:1 ratio gearbox. Key specifications include a no-load speed of 549.9 rpm, a no-load torque of 5.2 lb-in, a free-running current of 5.5 amps, and efficiencies of 81.5% for the gearbox, 61.1% for the motor, and 49.8% for the overall system. Start/stall conditions are listed as 21.88 amps current and 28.22 lb-in torque. Performance curves show torque, speed, and efficiency over a range of torque values from 0 to 490 lb-in.
Groschopp 50111 specsheet
This document provides specifications for a PM 6013 12V DC motor with a PS 1900 90:1 ratio gearbox. Key specifications include a no-load speed of 2750 rpm, rated speed of 30.6 rpm, rated torque of 56.1 lb-in, and maximum efficiency of 61.1% for the motor. The gearbox has an efficiency of 48.6% and the overall system efficiency is 29.7%. Charts show the motor's torque and efficiency curves across a range of speeds.
More Related Content
What's hot
Groschopp 62304 specsheet
The document provides specifications for a PM 6015 motor with a 115V voltage, 1300 rpm speed, and a PL 7300 30:1 ratio gearbox. The motor has a rating of 43.9 rpm, 18.2 lb-in of torque, and 0.47 amps of current. The gearbox, motor, and system efficiencies are 38.1%, 54.3%, and 20.7% respectively. Under start/stall conditions, the current is 1.54 amps and torque is 202.35 lb-in.
Groschopp 50121 specsheet
This document provides specifications for a PM 6013 24V DC motor with a PS 1900 120:1 ratio gearbox. Key specifications include a no-load speed of 2650 rpm, rated speed of 22.1 rpm, torque of 94.1 lb-in, and current of 2.8 amps. The motor has an efficiency of 66.0%, the gearbox 57.1%, and the overall system 37.7%. Start/stall conditions are 12.40 amps current and 679.58 lb-in torque. Performance curves show efficiency and torque over speed range. The motor and gearbox assembly is sold and serviced by Electromate.
Groschopp 50100 specsheet
This document provides specifications for a PM 6013 motor with a 60:1 ratio gearbox. The motor runs at 900 rpm and 12 V DC, with an output of 15.3 rpm and 55.5 lb-in of torque. Key specifications listed include current, output power, duty cycle, efficiency rates, start/stall conditions, and torque and speed curves. The motor and gearbox system are sold and serviced by Electromate.
Groschopp 50110 specsheet
This document provides specifications for a PM 6013 12V DC motor with a 60:1 ratio gearbox. Key specifications include a no load speed of 45.8 rpm, maximum torque of 43.0 lb-in, and maximum power output of 23 watts. The motor has an efficiency of 61.1% while the gearbox efficiency is 55.9% resulting in an overall system efficiency of 34.2%. Charts show torque and efficiency at varying speeds. The motor is sold and serviced by Electromate.
Groschopp 62405 specsheet
This document provides specifications for a PM 6015 motor with a 115V voltage, 1300 rpm speed, and 40:1 ratio RP 7300 gearbox. Key specifications include a 32.9 rpm speed, 35.4 lb-in torque, 0.47 amp current, and 30.1% system efficiency. Start/stall conditions are 1.54 amps current and 244.63 lb-in torque. Performance curves show torque, speed, efficiency at varying loads. The motor is sold and serviced by Electromate.
Groschopp 50132 specsheet
This document provides specifications for a PM 6013 motor with a 60:1 ratio gearbox. The motor runs on 90V DC with an output speed of 42.2 rpm, torque of 44.8 lb-in, and maximum efficiency of 61.9%. Performance curves are provided showing torque, speed, efficiency at varying loads. The motor has a continuous duty cycle and was manufactured by Groschopp.com.
Groschopp 50108 specsheet
This document provides specifications for a PM 6013 motor with a 12V DC voltage, 2750 RPM speed, and 30:1 ratio PS 1900 gearbox. Key specifications include a rated speed of 91.7 RPM, torque of 25.6 lb-in, current of 5.5 amps, and power output of 28 watts or 0.0372 HP. The gearbox efficiency is 66.6%, motor efficiency is 61.1%, and system efficiency is 40.7%. Start/stall conditions draw 21.88 amps and produce 158.53 lb-in of torque. Performance curves show torque and efficiency over a range of speeds.
Groschopp 50149 specsheet
This document provides specifications for a PM 6013 motor with a 40:1 ratio gearbox. Key specifications include a voltage of 130V DC, speed of 2450 rpm, output speed of 61.1 rpm, torque of 26.1 lb-in, and efficiencies of 54.1% for the gearbox and 57.3% for the motor. Performance curves are provided showing torque, speed, and efficiency over a range of operating conditions.
Groschopp 50117 specsheet
This document provides specifications for a PM 6013 24v DC motor with a 30:1 ratio gearbox. Key specifications include a no load speed of 88.5 rpm, torque of 27.7 lb-in, current of 2.8 amps, and power output of 29 watts. The motor has an efficiency of 66% and the gearbox has an efficiency of 67.3%, resulting in a system efficiency of 44.4%. Start/stall conditions are listed as 12.4 amps current and 196.29 lb-in torque. Performance curves are provided showing torque, speed, and efficiency at varying loads.
Groschopp 10336 specsheet
This document provides specifications for a PM 6015 motor with a 7.5:1 RA 3000T gearbox. Key specifications include a voltage of 90V DC, speed of 1600 rpm, output speed of 208.7 rpm, torque of 8.3 lb-in, current of 0.70 amps, and power output of 20 watts or 0.0273 horsepower. The gearbox efficiency is 51.9%, motor efficiency is 68%, and system efficiency is 35.3%. Start/stall conditions draw 2.33 amps and produce 47.13 lb-in of torque. Performance curves show efficiency and torque over a range of speeds.
Groschopp 50113 specsheet
This document provides specifications for a PM 6013 24V DC motor with a 5:1 ratio gearbox. Key specifications include a no-load speed of 531 rpm, a no-load current of 2.8 amps, a rated torque of 5.6 lb-in, and maximum efficiencies of 82.1% for the gearbox, 66% for the motor, and 54.2% for the overall system. Performance curves are provided showing torque, speed, and efficiency over a range of operating conditions.
Groschopp 50127 specsheet
This document provides specifications for a PM 6013 motor with a 15:1 ratio gearbox. The motor runs on 90V DC with a top speed of 2550 rpm. Key specifications include a rated speed of 168.9 rpm, torque of 15.4 lb-in, and current draw of 0.73 amps producing 31 watts of power. The gearbox and motor have efficiencies of 77.7% and 61.9% respectively, yielding a system efficiency of 48.1%. Startup requires 3.76 amps and generates 114.75 lb-in of torque. Performance curves show speed, torque, efficiency and rpm values over a range of torques from 0-180 lb-in.
Groschopp 50138 specsheet
This document provides specifications for a small electric motor. The motor runs on 115V, has a maximum speed of 2550 RPM, and is paired with a 20:1 ratio gearbox. Key specifications include a 127.5 RPM no-load speed, 13.1 lb-in of torque, and maximum efficiency of 35.2% for the combined motor-gearbox system. Performance curves show torque, speed, and efficiency over a range of loads. The motor is suitable for continuous duty applications.
Groschopp 50120 specsheet
This document provides specifications for a PM 6013 24V DC motor with a 2650 rpm speed and a PS 1900 90:1 ratio gearbox. Key specifications include a rated speed of 29.5 rpm, torque of 63.4 lb-in, current of 2.8 amps, and power output of 22 watts or 0.0297 horsepower. The gearbox efficiency is 51.3%, motor efficiency is 66%, and system efficiency is 33.8%. Start/stall conditions are 12.4 amps current and 568.73 lb-in torque. Performance curves show torque and efficiency over speed.
Groschopp 62305 specsheet
This document provides specifications for a PM 6015 motor with a 115V voltage, 1300 rpm speed, and 40:1 ratio PL 7300 gearbox. Key specifications include a 32.9 rpm speed, 41.5lb-in torque, 0.47 amp current, and 35.3% system efficiency. Start/stall conditions are listed as 1.54 amps current and 258.49 lb-in torque. Performance curves are provided for torque, speed, rpm, and efficiency. The motor and gearbox are sold and serviced by Electromate.
Groschopp 47754 specsheet
This document provides specifications for a 1 Ph 6540 TENV AC motor with a PS 1900 15:1 ratio gearbox. The motor runs at 3060 rpm single phase and 115v. Key specifications include an output speed of 203.8 rpm, torque of 10.9 lb-in, current of 0.62 amps, and power output of 26 watts or 0.0352 HP. Startup current is 1.32 amps with 9.63 lb-in of torque. Efficiency levels are provided for the gearbox, motor, and overall system at various torque and speed levels, with peak efficiencies of 74.6%, 49.4%, and 36.9%, respectively.
Groschopp 62306 specsheet
This document provides specifications for a PM 6015 motor with a 61:1 gearbox including details like voltage, speed, torque, efficiency and load characteristics. Key specs listed are a rated speed of 21.6 rpm, torque of 57.3 lb-in, and system efficiency of 32.0%. Performance charts show torque and efficiency at various speeds from 0-450 rpm. The motor and gearbox combination is intended for continuous duty applications.
Groschopp 50137 specsheet
This document provides specifications for a PM 6013 motor with a PS 1900 15:1 ratio gearbox. Key specifications include a voltage of 115V, speed of 2550 rpm, output speed of 170 rpm, torque of 10.8 lb-in, current of 0.52 amps, and power output of 22 watts. The motor has an efficiency of 52% while the gearbox is 74.6% efficient, resulting in a system efficiency of 38.8%. Charts show torque and speed performance as well as efficiency at varying torque levels.
Groschopp 50101 specsheet
This document provides specifications for a PM 6013 12V DC motor with a 90:1 ratio gearbox. Key specifications include a no-load speed of 10.2 rpm, maximum torque of 76.5lb-in, and maximum power output of 0.0123 HP. The motor has an efficiency of 51.9% while the gearbox efficiency is 55.3%, resulting in a system efficiency of 28.7%. Startup current and torque are 7.31 amps and 317.05 lb-in respectively. Performance curves show efficiency and torque output across a range of speeds.
Groschopp 62444 specsheet
This document provides specifications for a motor including its voltage, speed, gearbox ratio, rating, efficiency, start/stall conditions, and torque and speed curves. The motor runs at 115V and 2500 rpm with a 10:1 gearbox ratio. It has a rating of 245.2 rpm, 13.7 lb-in of torque, and 33.6% system efficiency. Under start/stall conditions it draws 7.18 amps and provides 221.19 lb-in of torque. Charts show the motor's torque and efficiency at varying speeds.
What's hot (20)
Similar to Groschopp 50106 specsheet
Groschopp 50104 specsheet
The document provides specifications for a PM 6013 12V DC motor with a 5:1 ratio gearbox. Key specifications include a no-load speed of 549.9 rpm, a no-load torque of 5.2 lb-in, a free-running current of 5.5 amps, and efficiencies of 81.5% for the gearbox, 61.1% for the motor, and 49.8% for the overall system. Start/stall conditions are listed as 21.88 amps current and 28.22 lb-in torque. Performance curves show torque, speed, and efficiency over a range of torque values from 0 to 490 lb-in.
Groschopp 50111 specsheet
This document provides specifications for a PM 6013 12V DC motor with a PS 1900 90:1 ratio gearbox. Key specifications include a no-load speed of 2750 rpm, rated speed of 30.6 rpm, rated torque of 56.1 lb-in, and maximum efficiency of 61.1% for the motor. The gearbox has an efficiency of 48.6% and the overall system efficiency is 29.7%. Charts show the motor's torque and efficiency curves across a range of speeds.
Groschopp 50122 specsheet
This document provides specifications for a PM 6013 90V DC motor with a 5:1 ratio gearbox. The motor runs at 1700 rpm and outputs 337 rpm, 5.9 lb-in of torque, and 0.0313 HP at 0.54 amps and 23 watts continuously. The gearbox efficiency is 82.4%, motor efficiency is 58.7%, and system efficiency is 48.3%. Start/stall conditions draw 2.19 amps and produce 31.17 lb-in of torque. Performance curves show torque, speed, rpm and efficiency at varying loads. The motor is sold and serviced by Electromate.
Groschopp 50134 specsheet
The document provides specifications for a PM 6013 motor with a 120:1 ratio gearbox. The motor runs at 90V DC and 2550 rpm, with an output of 21.1 rpm, 87.9 lb-in of torque, and 0.0294 HP. The gearbox has an efficiency of 55.4% while the motor is 61.9% efficient, resulting in a system efficiency of 34.3%. Charts show the motor's torque and speed performance as well as efficiency at varying torque levels.
Groschopp 50123 specsheet
This document provides specifications for a PM 6013 motor with a 90V DC voltage, 1700 RPM speed, and 15:1 ratio PS 1900 gearbox. The motor has an output of 112.3 RPM, 16.7 lb-in of torque, 0.54 amps of current, and 22 watts of power. It has a continuous duty cycle and system efficiency of 45.9%. Start/stall conditions are 2.19 amps and 89.92 lb-in of torque. Performance curves show speed, torque, efficiency, and RPM relationships. The motor is sold and serviced by Electromate.
Groschopp 50116 specsheet
This document provides specifications for a PM 6013 motor with a 24V DC voltage and 2650 RPM speed that is connected to a PS 1900 20:1 ratio gearbox. The motor has a rating of 132.8 RPM and 19.9 lb-in of torque at 2.8 amps of current. The gearbox and motor efficiencies are 72.3% and 66% respectively, yielding a system efficiency of 47.7%. Start/stall conditions are 12.4 amps of current and 136.8 lb-in of torque. Performance curves are provided for speed, torque, and efficiency. The motor is sold and serviced by Electromate.
Groschopp 50128 specsheet
This document provides specifications for a PM 6013 motor powered by 90V DC with a 20:1 ratio gearbox. The motor runs at 2550 rpm and produces 126.7 rpm and 19.0 lb-in of torque at the output. It has a continuous duty cycle and system efficiency of 44.5%. Start/stall conditions produce 3.76 amps of current and 158.47 lb-in of torque. Performance curves show torque, speed, and efficiency at varying loads. The motor is sold and serviced by Electromate.
Groschopp 10312 specsheet
This document provides specifications for a PM 6015 12V DC motor with a RA 2600T 60:1 ratio gearbox. Key specifications include a no-load speed of 39.6 rpm, maximum torque of 32.3 lb-in, and maximum power output of 15 watts. Performance charts show torque, speed, and efficiency at varying loads. The gearbox efficiency is 31.4% while the motor efficiency is 68.2%, resulting in an overall system efficiency of 21.4%.
Groschopp 10312 specsheet
This document provides specifications for a PM 6015 12V DC motor with a RA 2600T 60:1 ratio gearbox. Key specifications include a no-load speed of 39.6 rpm, maximum torque of 32.3 lb-in, and system efficiency of 21.4%. Performance curves are provided showing torque, speed, and efficiency over various operating conditions. The motor and gearbox combination is sold and serviced by Electromate.
Groschopp 50145 specsheet
This document provides specifications for a PM 6013 motor with a 10:1 gearbox. The motor runs at 130V DC with a no load speed of 2450 rpm. Key specifications include a rated output of 244.5 rpm and 9.3 lb-in of torque drawing 0.45 amps of current. The gearbox and motor have efficiencies of 77.0% and 57.3% respectively, yielding a system efficiency of 44.1%. Performance curves show torque, speed, and efficiency over a range of RPM.
Groschopp 62417 specsheet
This document provides specifications for a PM 6015 motor with a 30:1 gearbox. The motor runs on 115V, has a no-load speed of 2450 RPM, and can output up to 8.5 lb-in of torque at 81.4 RPM. The gearbox has an efficiency of 21.5% while the motor efficiency is 60.2%, resulting in a system efficiency of 12.9%. Startup conditions draw 2.79A of current and can generate 234.18 lb-in of torque. Performance curves show torque and efficiency over a range of speeds.
Groschopp 50131 specsheet
The document provides specifications for a PM 6013 motor with a 45:1 ratio gearbox. The motor runs on 90V DC with an output speed of 56.3 rpm, torque of 33.9 lb-in, and maximum efficiency of 61.9%. Charts show the motor's torque and efficiency across different speeds.
Groschopp 50126 specsheet
This document provides specifications for a PM 6013 motor with a 10:1 ratio gearbox. The motor runs at 90V DC and 2550 rpm, powering the gearbox to output 253.3 rpm. It can provide continuous torque of 10.3 lb-in at 0.73 amps of current. System efficiency is rated at 48.2%. Start conditions require 3.76 amps and 77.23 lb-in of torque. Performance curves show speed, torque, efficiency and rpm relationships. The motor and gearbox system is sold and serviced by Electromate.
Groschopp 10346 specsheet
This document provides specifications for a PM 6015 130V DC motor with a 5:1 ratio RA 2600T gearbox. Key specifications include a no-load speed of 509.6 rpm, a no-load torque of 4.6 lb-in, a continuous duty cycle, and system efficiency of 33.8%. Performance curves show torque, speed, and efficiency over a range of torque values from 0-60 lb-in.
Groschopp 62317 specsheet
This document provides specifications for a PM 6015 motor with a PL 7300 30:1 ratio gearbox. The motor runs on 115V, has a no-load speed of 2450 RPM, and can output up to 10.3 lb-in of torque at 81.4 RPM. Performance curves show torque and efficiency at varying speeds. The gearbox and motor have efficiencies of 26.2% and 60.2% respectively, yielding a system efficiency of 15.8%.
Groschopp 62317 specsheet
This document provides specifications for a PM 6015 motor with a PL 7300 30:1 ratio gearbox. The motor runs on 115V, has a no-load speed of 2450 RPM, and can output up to 10.3 lb-in of torque at 81.4 RPM. Performance curves show torque and efficiency at varying speeds. The gearbox and motor have efficiencies of 26.2% and 60.2% respectively, yielding a system efficiency of 15.8%.
Groschopp 50141 specsheet
This document provides specifications for a PM 6013 motor with a PS 1900 60:1 ratio gearbox. Key specifications include a voltage of 115V, speed of 2550 rpm, output speed of 42.5 rpm, torque of 30.8 lb-in, current of 0.52 amps, and power output of 15 watts. The motor efficiency is 52.0%, gearbox efficiency is 52.9%, and system efficiency is 27.5%. Start/stall current is 2.52 amps and torque is 378.27 lb-in. Speed and efficiency curves are provided for the motor and system. The motor and gearbox combination is sold and serviced by Electromate.
Groschopp 62446 specsheet
This document provides specifications for a PM 8014 motor with a 20:1 gearbox. Key details include:
- The motor operates at 115V and 2500 rpm, with the gearbox providing an output of 122.6 rpm.
- At full load, the motor draws 1.17 amps and produces 39 watts of power (0.0518 HP).
- Efficiency is rated at 51.2% for the gearbox, 63.6% for the motor, and 32.6% for the overall system.
- Startup current is 7.18 amps with a stall torque of 427.21 lb-in.
Groschopp 10336 specsheet
This document provides specifications for a PM 6015 motor with a 7.5:1 RA 3000T gearbox. Key specifications include a voltage of 90V DC, speed of 1600 rpm, output speed of 208.7 rpm, torque of 8.3 lb-in, current of 0.70 amps, and power output of 20 watts or 0.0273 horsepower. The gearbox efficiency is 51.9%, motor efficiency is 68%, and system efficiency is 35.3%. Start/stall conditions draw 2.33 amps and produce 47.13 lb-in of torque. Performance curves show efficiency and torque over a range of speeds.
Similar to Groschopp 50106 specsheet (19)
More from Electromate
Automated screw thread quality checking using SMAC LAR55 actuator new produc...
The document discusses an automated screw thread quality checking solution using SMAC LAR55 actuators. It allows 100% inspection of screw threads to check for issues like oversizing, cross-threading, depth, and pitch. This can help automakers meet higher quality standards by eliminating defective parts and providing immediate feedback. The LAR55's precision Z-theta motion makes it suitable for automatically checking screw threads.
An overview of the various kinematic models in both parallel and serial robot...
This document provides an overview of kinematic models for parallel and serial robotic mechanisms and their suitability for precision applications. It introduces Ilian Bonev, a professor at École de technologie supérieure who is an expert in parallel robots and precision robotics. It then describes some parallel robots that have been developed at the Control and Robotics Laboratory including ones for medical, manufacturing, and research applications. The document concludes with sections on robot calibration methods and the differences between serial and parallel mechanisms.
Galil motion control robotic symposium presentation-linear motion from non-li...
The document discusses non-linear robotic motion control solutions. It describes how Galil Motion Control provides controllers for various types of non-linear robots like SCARA and delta robots. It covers topics like selecting the robot topology, designing each joint, motor selection, forward and inverse kinematics equations, vibration reduction techniques, and examples of implementing motion control for SCARA robots.
Advanced motion controls robotics symposium presentation-open standard tools ...
This document discusses the development of control software for a linear delta robot used in 3D printing. It describes using PLCopen function blocks and XML files to create reusable software components for robot kinematics and handling G-code from slicing programs. Function block diagrams are created to process G-code, set coordinate systems, and represent the overall project logic. The solution involves creating user-defined function blocks to handle the robot's inverse kinematics and translate G-code commands into motions.
Maxon motor ag robotic symposium presentation-impedance control overview and ...
The document discusses impedance control, an approach to robot control that models mechanical systems as electrical circuits using impedance. It defines electrical and mechanical impedance analogously and describes how components like resistors, inductors, and capacitors correspond to dampers, masses, and springs physically. The document outlines applications of impedance control and emphasizes the importance of selecting low-inertia motors, high-efficiency gears, and fast, accurate sensors and controllers. Overall, the document argues that impedance control requires creative engineering of mechanical designs and electrical components.
Kollmorgen robotic symposium presentation-motor design impacts on the optimiz...
The document discusses how motor design impacts the optimization of robotic systems. It explains that frameless motors can enable smaller, lighter and faster robots through their direct drive capabilities and high torque density. The document also covers various motor topologies and important concepts like torque constant, motor size constant, and how they relate to continuous torque capacity, efficiency and losses. Application examples discussed include collaborative robots, surgical robots, and mobile robots.
Harmonic drive llc robotics symposium presentation-designing from the inside ...
The document discusses defining robot performance requirements and how customized solutions from Harmonic Drive can help meet those requirements. It provides an overview of Harmonic Drive's product line and gear technologies, then discusses how mechanical modifications and performance customizations can be made to their gear components and systems to optimize robots for specific design requirements and applications. Customizations like increased accuracy, stiffness, torque properties and materials can be made, with varying levels of difficulty and cost implications discussed.
Thomson Linear Dual Shaft Rail 2DA Modular Specs
This document provides specifications and dimensional drawings for Thomson Industries' Dual Shaft Rail linear guides with modular carriages. It includes part numbers, dimensions, load ratings and descriptions of the components. Linear guides use dual linear race shaft rails and modular carriages with open type Super Smart Ball Bushings. They are used in continuously supported applications requiring rigidity and are adaptable to any drive system.
Thomson Linear 2DA QuickSlide System with Brake
This document provides specifications for Thomson Industries' 2DA QuickSlide system with brake, including:
- It offers manual locking with infinite positioning, no carriage surface deflection when locked, and immediate availability in common sizes.
- The locking mechanism does not increase load on the bearing and allows zero axial movement during locking.
- It provides a fully supported dual shaft assembly for maximum rigidity and unlimited travel.
Thomson Linear RoundRail 2CA Web Universal Carriage Specs
This document contains specifications for Thomson Industries' Twin Shaft Web Linear Guide system. It includes dimensions, part numbers, load ratings and descriptions of the components. The linear guides use a double shaft and welded web design for improved torque strength and deflection characteristics. They are designed to move medium loads with low friction and are commonly used when bridging gaps.
Thomson Linear RoundRail 1VC Double End Supported Specs
The document provides specifications for various FluoroNyliner linear guide components including:
- Pillow blocks, twin pillow blocks, shaft end support blocks, and mounting table tops for different size linear guides ranging from 0.375 to 1.5 inches in diameter.
- It lists the part numbers, dimensions, materials, weights, and other specifications for each component.
- It also includes an illustration of a double end supported linear guide system with pillow blocks, shafts, end supports, and a size B mounting table top.
Thomson Linear RoundRail 2CA Web Flanged Carriage Specs
This document provides specifications for Thomson Industries' Twin Shaft Web Linear Guide system. It includes dimensions, load capacity information, and part numbers for various components of the 2CA linear guide, which features a flanged carriage design and double linear race shaft for improved torque and deflection characteristics. Configuration and installation details are also listed.
Thomson Linear RoundRail Twin Shaft Web 2CA
The document provides specifications for Thomson RoundRail linear guides and components. It includes dimensions, features, and part numbering for twin shaft web linear guides in both vertical and horizontal configurations ranging from 0.5 to 1 inch in diameter. Load capacity charts are provided for different guide sizes and configurations that can support loads between 165 to 3000 pounds depending on the model. Maximum guide lengths are listed as 72 inches and engineering calculations for shaft deflection are also noted.
Thomson Linear RoundRail 1VC Double Unsupported Specs
The document contains specifications for various FluoroNyliner linear guide parts, including dimensions, part numbers, materials, load ratings, and performance notes. It lists 14 different linear guide parts with nominal diameters ranging from 0.375 to 1.5 inches. For each part, it provides dimensions for components like bearing blocks, carriages, and table tops. It also includes general information on specifying linear guides and product notes on materials and lubrication.
Thomson Linear WhisperTrak Actuators
The Thomson WhisperTrak electric linear actuator offers a compact, quiet, and durable solution for applications requiring linear motion. It is particularly well-suited for personal mobility, medical, and rehabilitation equipment due to its small size and silent operation. The actuator provides reliable, maintenance-free movement and has an IP67 rating, making it protected against water and dust. Its flexibility and high performance in a small package make it suitable for a wide range of industries.
Thomson T-Series Profile Rail
The document provides information on the T-Series Ball Profile Rail from Thomson, including:
- It is lightweight, highly flexible, and forgiving, making it suitable for applications with poor misalignment.
- It has a low cost of installation as it can be mounted directly to non-machined bases without special tools.
- It offers industry standard dimensions and dimensions interchangeable with other rail brands, allowing for easy replacement.
Thomson Linear RoundRail Accessories Collapsable Bellows Specs
This document provides specifications for various bellows that can be used to protect slides and shafts. It lists different part numbers for bellows with a range of nominal shaft diameters from 1/4 to 1 1/2 inches. The bellows are made of polyester cover and PVC stiffeners. Dimensions such as length, width, and height are provided for each part number. Some bellows are single shaft while others are dual shaft or for horizontal vs vertical systems. Each bellows comes with attachment pieces like Velcro or mounting brackets.
Thomson Linear Roundrail Dual Shaft Rail 2DA Specs
The document provides specifications for Danaher Motion's dual shaft rail linear guides with integrated carriages. It includes dimensions, load ratings, dynamic capacities, and part numbering for the 2DA series linear guides available in nominal diameters of 0.5, 0.75, and 1.0 inches. Both full and short length carriage options are detailed along with components, material specifications, and the supplier contact information.
Thomson Linear RoundRail Continuous Support 1PC Specs
This document provides specifications for various linear guide assemblies with table tops from Thomson Industries. It includes dimensions, part numbers, load ratings and limit data for single rail linear guides with sizes ranging from M12 to M40 diameter in configurations with 4 pillow blocks, 2 twin pillow blocks or no pillow blocks and size E or F table tops. Mounting details and specifications are provided for the various components including rails, pillow blocks and table tops.
Thomson Linear RoundRail Continuous Support 1PB Specs
The document contains specifications for various continuously supported linear guide assemblies and their components. It lists part numbers, dimensions, load ratings, and other technical specifications for linear guides, support rails, pillow blocks, and bearings. Materials include aluminum alloys and bearings include ball bushings. Linear guides are specified by part number plus length and provide continuous support for applications requiring rigidity.
More from Electromate (20)
Automated screw thread quality checking using SMAC LAR55 actuator new produc...
Automated screw thread quality checking using SMAC LAR55 actuator new produc...
An overview of the various kinematic models in both parallel and serial robot...
An overview of the various kinematic models in both parallel and serial robot...
Galil motion control robotic symposium presentation-linear motion from non-li...
Galil motion control robotic symposium presentation-linear motion from non-li...
Advanced motion controls robotics symposium presentation-open standard tools ...
Advanced motion controls robotics symposium presentation-open standard tools ...
Maxon motor ag robotic symposium presentation-impedance control overview and ...
Maxon motor ag robotic symposium presentation-impedance control overview and ...
Kollmorgen robotic symposium presentation-motor design impacts on the optimiz...
Kollmorgen robotic symposium presentation-motor design impacts on the optimiz...
Harmonic drive llc robotics symposium presentation-designing from the inside ...
Harmonic drive llc robotics symposium presentation-designing from the inside ...
Thomson Linear RoundRail 2CA Web Universal Carriage Specs
Thomson Linear RoundRail 2CA Web Universal Carriage Specs
Thomson Linear RoundRail 1VC Double End Supported Specs
Thomson Linear RoundRail 1VC Double End Supported Specs
Thomson Linear RoundRail 2CA Web Flanged Carriage Specs
Thomson Linear RoundRail 2CA Web Flanged Carriage Specs
Thomson Linear RoundRail 1VC Double Unsupported Specs
Thomson Linear RoundRail 1VC Double Unsupported Specs
Thomson Linear RoundRail Accessories Collapsable Bellows Specs
Thomson Linear RoundRail Accessories Collapsable Bellows Specs
Thomson Linear Roundrail Dual Shaft Rail 2DA Specs
Thomson Linear Roundrail Dual Shaft Rail 2DA Specs
Thomson Linear RoundRail Continuous Support 1PC Specs
Thomson Linear RoundRail Continuous Support 1PC Specs
Thomson Linear RoundRail Continuous Support 1PB Specs
Thomson Linear RoundRail Continuous Support 1PB Specs
Recently uploaded
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
Leonard Jayamohan, Partner & Generative AI Lead, Deloitte
This keynote will reveal how Deloitte leverages Neo4j’s graph power for groundbreaking digital twin solutions, achieving a staggering 100x performance boost. Discover the essential role knowledge graphs play in successful generative AI implementations. Plus, get an exclusive look at an innovative Neo4j + Generative AI solution Deloitte is developing in-house.
Pushing the limits of ePRTC: 100ns holdover for 100 days
At WSTS 2024, Alon Stern explored the topic of parametric holdover and explained how recent research findings can be implemented in real-world PNT networks to achieve 100 nanoseconds of accuracy for up to 100 days.
Alt. GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using ...
Effective Application Security in Software Delivery lifecycle using Deployment Firewall and DBOM
The modern software delivery process (or the CI/CD process) includes many tools, distributed teams, open-source code, and cloud platforms. Constant focus on speed to release software to market, along with the traditional slow and manual security checks has caused gaps in continuous security as an important piece in the software supply chain. Today organizations feel more susceptible to external and internal cyber threats due to the vast attack surface in their applications supply chain and the lack of end-to-end governance and risk management.
The software team must secure its software delivery process to avoid vulnerability and security breaches. This needs to be achieved with existing tool chains and without extensive rework of the delivery processes. This talk will present strategies and techniques for providing visibility into the true risk of the existing vulnerabilities, preventing the introduction of security issues in the software, resolving vulnerabilities in production environments quickly, and capturing the deployment bill of materials (DBOM).
Speakers:
Bob Boule
Robert Boule is a technology enthusiast with PASSION for technology and making things work along with a knack for helping others understand how things work. He comes with around 20 years of solution engineering experience in application security, software continuous delivery, and SaaS platforms. He is known for his dynamic presentations in CI/CD and application security integrated in software delivery lifecycle.
Gopinath Rebala
Gopinath Rebala is the CTO of OpsMx, where he has overall responsibility for the machine learning and data processing architectures for Secure Software Delivery. Gopi also has a strong connection with our customers, leading design and architecture for strategic implementations. Gopi is a frequent speaker and well-known leader in continuous delivery and integrating security into software delivery.
Artificial Intelligence for XMLDevelopment
In the rapidly evolving landscape of technologies, XML continues to play a vital role in structuring, storing, and transporting data across diverse systems. The recent advancements in artificial intelligence (AI) present new methodologies for enhancing XML development workflows, introducing efficiency, automation, and intelligent capabilities. This presentation will outline the scope and perspective of utilizing AI in XML development. The potential benefits and the possible pitfalls will be highlighted, providing a balanced view of the subject.
We will explore the capabilities of AI in understanding XML markup languages and autonomously creating structured XML content. Additionally, we will examine the capacity of AI to enrich plain text with appropriate XML markup. Practical examples and methodological guidelines will be provided to elucidate how AI can be effectively prompted to interpret and generate accurate XML markup.
Further emphasis will be placed on the role of AI in developing XSLT, or schemas such as XSD and Schematron. We will address the techniques and strategies adopted to create prompts for generating code, explaining code, or refactoring the code, and the results achieved.
The discussion will extend to how AI can be used to transform XML content. In particular, the focus will be on the use of AI XPath extension functions in XSLT, Schematron, Schematron Quick Fixes, or for XML content refactoring.
The presentation aims to deliver a comprehensive overview of AI usage in XML development, providing attendees with the necessary knowledge to make informed decisions. Whether you’re at the early stages of adopting AI or considering integrating it in advanced XML development, this presentation will cover all levels of expertise.
By highlighting the potential advantages and challenges of integrating AI with XML development tools and languages, the presentation seeks to inspire thoughtful conversation around the future of XML development. We’ll not only delve into the technical aspects of AI-powered XML development but also discuss practical implications and possible future directions.
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
As the digital landscape continually evolves, operating systems play a critical role in shaping user experiences and productivity. The launch of Nitrux Linux 3.5.0 marks a significant milestone, offering a robust alternative to traditional systems such as Windows 11. This article delves into the essence of Nitrux Linux 3.5.0, exploring its unique features, advantages, and how it stands as a compelling choice for both casual users and tech enthusiasts.
GraphSummit Singapore | Graphing Success: Revolutionising Organisational Stru...
Sudheer Mechineni, Head of Application Frameworks, Standard Chartered Bank
Discover how Standard Chartered Bank harnessed the power of Neo4j to transform complex data access challenges into a dynamic, scalable graph database solution. This keynote will cover their journey from initial adoption to deploying a fully automated, enterprise-grade causal cluster, highlighting key strategies for modelling organisational changes and ensuring robust disaster recovery. Learn how these innovations have not only enhanced Standard Chartered Bank’s data infrastructure but also positioned them as pioneers in the banking sector’s adoption of graph technology.
Mind map of terminologies used in context of Generative AI
Mind map of common terms used in context of Generative AI.
“I’m still / I’m still / Chaining from the Block”
“An Outlook of the Ongoing and Future Relationship between Blockchain Technologies and Process-aware Information Systems.” Invited talk at the joint workshop on Blockchain for Information Systems (BC4IS) and Blockchain for Trusted Data Sharing (B4TDS), co-located with with the 36th International Conference on Advanced Information Systems Engineering (CAiSE), 3 June 2024, Limassol, Cyprus.
UiPath Test Automation using UiPath Test Suite series, part 5
Welcome to UiPath Test Automation using UiPath Test Suite series part 5. In this session, we will cover CI/CD with devops.
Topics covered:
CI/CD with in UiPath
End-to-end overview of CI/CD pipeline with Azure devops
Speaker:
Lyndsey Byblow, Test Suite Sales Engineer @ UiPath, Inc.
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
The choice of an operating system plays a pivotal role in shaping our computing experience. For decades, Microsoft's Windows has dominated the market, offering a familiar and widely adopted platform for personal and professional use. However, as technological advancements continue to push the boundaries of innovation, alternative operating systems have emerged, challenging the status quo and offering users a fresh perspective on computing.
One such alternative that has garnered significant attention and acclaim is Nitrux Linux 3.5.0, a sleek, powerful, and user-friendly Linux distribution that promises to redefine the way we interact with our devices. With its focus on performance, security, and customization, Nitrux Linux presents a compelling case for those seeking to break free from the constraints of proprietary software and embrace the freedom and flexibility of open-source computing.
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
ABSTRACT: A prima vista, un mattoncino Lego e la backdoor XZ potrebbero avere in comune il fatto di essere entrambi blocchi di costruzione, o dipendenze di progetti creativi e software. La realtà è che un mattoncino Lego e il caso della backdoor XZ hanno molto di più di tutto ciò in comune.
Partecipate alla presentazione per immergervi in una storia di interoperabilità, standard e formati aperti, per poi discutere del ruolo importante che i contributori hanno in una comunità open source sostenibile.
BIO: Sostenitrice del software libero e dei formati standard e aperti. È stata un membro attivo dei progetti Fedora e openSUSE e ha co-fondato l'Associazione LibreItalia dove è stata coinvolta in diversi eventi, migrazioni e formazione relativi a LibreOffice. In precedenza ha lavorato a migrazioni e corsi di formazione su LibreOffice per diverse amministrazioni pubbliche e privati. Da gennaio 2020 lavora in SUSE come Software Release Engineer per Uyuni e SUSE Manager e quando non segue la sua passione per i computer e per Geeko coltiva la sua curiosità per l'astronomia (da cui deriva il suo nickname deneb_alpha).
National Security Agency - NSA mobile device best practices
Threats to mobile devices are more prevalent and increasing in scope and complexity. Users of mobile devices desire to take full advantage of the features
available on those devices, but many of the features provide convenience and capability but sacrifice security. This best practices guide outlines steps the users can take to better protect personal devices and information.
How to Get CNIC Information System with Paksim Ga.pptx
Pakdata Cf is a groundbreaking system designed to streamline and facilitate access to CNIC information. This innovative platform leverages advanced technology to provide users with efficient and secure access to their CNIC details.
Removing Uninteresting Bytes in Software Fuzzing
Imagine a world where software fuzzing, the process of mutating bytes in test seeds to uncover hidden and erroneous program behaviors, becomes faster and more effective. A lot depends on the initial seeds, which can significantly dictate the trajectory of a fuzzing campaign, particularly in terms of how long it takes to uncover interesting behaviour in your code. We introduce DIAR, a technique designed to speedup fuzzing campaigns by pinpointing and eliminating those uninteresting bytes in the seeds. Picture this: instead of wasting valuable resources on meaningless mutations in large, bloated seeds, DIAR removes the unnecessary bytes, streamlining the entire process.
In this work, we equipped AFL, a popular fuzzer, with DIAR and examined two critical Linux libraries -- Libxml's xmllint, a tool for parsing xml documents, and Binutil's readelf, an essential debugging and security analysis command-line tool used to display detailed information about ELF (Executable and Linkable Format). Our preliminary results show that AFL+DIAR does not only discover new paths more quickly but also achieves higher coverage overall. This work thus showcases how starting with lean and optimized seeds can lead to faster, more comprehensive fuzzing campaigns -- and DIAR helps you find such seeds.
- These are slides of the talk given at IEEE International Conference on Software Testing Verification and Validation Workshop, ICSTW 2022.
TrustArc Webinar - 2024 Global Privacy Survey
How does your privacy program stack up against your peers? What challenges are privacy teams tackling and prioritizing in 2024?
In the fifth annual Global Privacy Benchmarks Survey, we asked over 1,800 global privacy professionals and business executives to share their perspectives on the current state of privacy inside and outside of their organizations. This year’s report focused on emerging areas of importance for privacy and compliance professionals, including considerations and implications of Artificial Intelligence (AI) technologies, building brand trust, and different approaches for achieving higher privacy competence scores.
See how organizational priorities and strategic approaches to data security and privacy are evolving around the globe.
This webinar will review:
- The top 10 privacy insights from the fifth annual Global Privacy Benchmarks Survey
- The top challenges for privacy leaders, practitioners, and organizations in 2024
- Key themes to consider in developing and maintaining your privacy program
Uni Systems Copilot event_05062024_C.Vlachos.pdf
Unlocking Productivity: Leveraging the Potential of Copilot in Microsoft 365, a presentation by Christoforos Vlachos, Senior Solutions Manager – Modern Workplace, Uni Systems
UiPath Test Automation using UiPath Test Suite series, part 6
Welcome to UiPath Test Automation using UiPath Test Suite series part 6. In this session, we will cover Test Automation with generative AI and Open AI.
UiPath Test Automation with generative AI and Open AI webinar offers an in-depth exploration of leveraging cutting-edge technologies for test automation within the UiPath platform. Attendees will delve into the integration of generative AI, a test automation solution, with Open AI advanced natural language processing capabilities.
Throughout the session, participants will discover how this synergy empowers testers to automate repetitive tasks, enhance testing accuracy, and expedite the software testing life cycle. Topics covered include the seamless integration process, practical use cases, and the benefits of harnessing AI-driven automation for UiPath testing initiatives. By attending this webinar, testers, and automation professionals can gain valuable insights into harnessing the power of AI to optimize their test automation workflows within the UiPath ecosystem, ultimately driving efficiency and quality in software development processes.
What will you get from this session?
1. Insights into integrating generative AI.
2. Understanding how this integration enhances test automation within the UiPath platform
3. Practical demonstrations
4. Exploration of real-world use cases illustrating the benefits of AI-driven test automation for UiPath
Topics covered:
What is generative AI
Test Automation with generative AI and Open AI.
UiPath integration with generative AI
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
Presentation of the OECD Artificial Intelligence Review of Germany
Consult the full report at https://www.oecd.org/digital/oecd-artificial-intelligence-review-of-germany-609808d6-en.htm
Recently uploaded (20)
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
Pushing the limits of ePRTC: 100ns holdover for 100 days
Pushing the limits of ePRTC: 100ns holdover for 100 days
Alt. GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using ...
Alt. GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using ...
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
GraphSummit Singapore | Graphing Success: Revolutionising Organisational Stru...
GraphSummit Singapore | Graphing Success: Revolutionising Organisational Stru...
Mind map of terminologies used in context of Generative AI
Mind map of terminologies used in context of Generative AI
UiPath Test Automation using UiPath Test Suite series, part 5
UiPath Test Automation using UiPath Test Suite series, part 5
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
National Security Agency - NSA mobile device best practices
National Security Agency - NSA mobile device best practices
How to Get CNIC Information System with Paksim Ga.pptx
How to Get CNIC Information System with Paksim Ga.pptx
UiPath Test Automation using UiPath Test Suite series, part 6
UiPath Test Automation using UiPath Test Suite series, part 6
Presentation of the OECD Artificial Intelligence Review of Germany
Presentation of the OECD Artificial Intelligence Review of Germany
Groschopp 50106 specsheet
- 1. Prepared by: Groschopp.com 02/24/14 Motor: Voltage: Speed: Gearbox: PM 6013 12 v DC 2750 rpm 2 Poles PS 1900 15:1 Ratio Product ID: 50106 SPECIFICATIONS Rating: Speed: Torque: Current: Output: Output: 183.3 rpm 14.9lb-in 5.5 amps 32 watts 0.0433 HP Duty Cycle: On: Off: Continuous Efficiency: Gearbox: Motor: System: 77.4 % 61.1 % 47.3 % Start/Stall Conditions: Current: Torque: 21.88 amps 81.42 lb-in Constants: Ke: 3.63 v/krpm Kt: 0.31 lb-in/amp Torque (lb-in) Speed RPM Efficiency 25.0 0.0 0.0 9.0 50.0 18.0 75.0 27.0 100.0 36.0 125.0 45.0 150.0 54.0 175.0 63.0 200.0 72.0 225.0 81.0 90.0 80.0 70.0 60.0 50.0 40.0 30.0 20.0 10.0 Speed, Efficiency Vs. Torque Cold Hot Notes: Sold & Serviced By: ELECTROMATE Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com