Groschopp 50104 specsheet
•
0 likes•65 views
The document provides specifications for a PM 6013 12V DC motor with a 5:1 ratio gearbox. Key specifications include a no-load speed of 549.9 rpm, a no-load torque of 5.2 lb-in, a free-running current of 5.5 amps, and efficiencies of 81.5% for the gearbox, 61.1% for the motor, and 49.8% for the overall system. Start/stall conditions are listed as 21.88 amps current and 28.22 lb-in torque. Performance curves show torque, speed, and efficiency over a range of torque values from 0 to 490 lb-in.
Report
Share
Report
Share
Download to read offline
Recommended
Groschopp 50105 specsheet
This document provides specifications for a small DC motor including its voltage, speed, gearbox ratio, output speed, torque, current draw, efficiency ratings, start/stall conditions, and speed-torque and efficiency curves. Key details are the motor runs at 12V DC and 2750 rpm, has a 10:1 gearbox, outputs 275 rpm and 9.9 lb-in of torque, and has a maximum efficiency of 47.4% overall. Performance data is provided across a range of torque and speed values.
Groschopp 50103 specsheet
This document provides specifications for a small DC motor with a high-ratio gearbox. The motor runs at 900 rpm and 12V, with an output speed of 4.8 rpm after passing through the 240:1 gearbox. Key specifications are listed, including torque of 125 lb-in, current of 1.67A, and power output of 7 watts or 0.0096 HP. Charts show the motor's torque and efficiency characteristics across a range of speeds. The motor is intended for continuous-duty operation and has a start/stall current of 7.31A and torque of 845.8 lb-in.
Groschopp 50125 specsheet
This document provides specifications for a PM 6013 motor with a 5:1 ratio gearbox. The motor runs on 90V DC with a no-load speed of 2550 rpm. It has a rated speed of 506.6 rpm, torque of 5.4 lb-in, current of 0.73 amps, and power output of 32 watts or 0.0435 horsepower. The gearbox efficiency is 81.8%, motor efficiency is 61.9%, and system efficiency is 50.7%. Startup requires 3.76 amps and 39.89 lb-in of torque. Performance curves show torque and efficiency over speed.
Groschopp 50121 specsheet
This document provides specifications for a PM 6013 24V DC motor with a PS 1900 120:1 ratio gearbox. Key specifications include a no-load speed of 2650 rpm, rated speed of 22.1 rpm, torque of 94.1 lb-in, and current of 2.8 amps. The motor has an efficiency of 66.0%, the gearbox 57.1%, and the overall system 37.7%. Start/stall conditions are 12.40 amps current and 679.58 lb-in torque. Performance curves show efficiency and torque over speed range. The motor and gearbox assembly is sold and serviced by Electromate.
Groschopp 50115 specsheet
This document provides specifications for a PM 6013 24v DC motor with a 15:1 ratio gearbox. Key specifications include a no-load speed of 2650 rpm, rated speed of 177 rpm, torque of 16.1 lb-in, and efficiencies of 78% for the gearbox, 66% for the motor, and 51.5% for the overall system. Start/stall conditions are listed as 12.4 amps current and 99.4 lb-in torque. Speed and efficiency curves are provided for torque ranges from 0-200 lb-in.
Groschopp 50114 specsheet
This document provides specifications for a PM 6013 24V DC motor with a 10:1 ratio gearbox. Key specifications include a no load speed of 265.5 rpm, a torque of 10.8 lb-in, a current of 2.8 amps, and an output of 34 watts. The gearbox efficiency is 78.3%, the motor efficiency is 66%, and the system efficiency is 51.6%. Start/stall conditions are 12.4 amps current and 66.93 lb-in torque. Performance curves are provided showing torque, speed, rpm, and efficiency levels across a range of operating points.
Groschopp 50113 specsheet
This document provides specifications for a PM 6013 24V DC motor with a 5:1 ratio gearbox. Key specifications include a no-load speed of 531 rpm, a no-load current of 2.8 amps, a rated torque of 5.6 lb-in, and maximum efficiencies of 82.1% for the gearbox, 66% for the motor, and 54.2% for the overall system. Performance curves are provided showing torque, speed, and efficiency over a range of operating conditions.
Groschopp 50107 specsheet
This document provides specifications for a PM 6013 motor with a 12V DC voltage, 2750 RPM speed, and 20:1 ratio PS 1900 gearbox. Key specifications include an output speed of 137.5 RPM, torque of 18.3 lb-in, current of 5.5 amps, and power output of 30 watts. The motor has a continuous duty cycle and efficiency of 61.1% for the motor alone and 43.6% for the overall system. Start/stall conditions are listed as 21.88 amps current and 111.51 lb-in torque. Performance charts show torque, speed, RPM, and efficiency at varying loads.
Recommended
Groschopp 50105 specsheet
This document provides specifications for a small DC motor including its voltage, speed, gearbox ratio, output speed, torque, current draw, efficiency ratings, start/stall conditions, and speed-torque and efficiency curves. Key details are the motor runs at 12V DC and 2750 rpm, has a 10:1 gearbox, outputs 275 rpm and 9.9 lb-in of torque, and has a maximum efficiency of 47.4% overall. Performance data is provided across a range of torque and speed values.
Groschopp 50103 specsheet
This document provides specifications for a small DC motor with a high-ratio gearbox. The motor runs at 900 rpm and 12V, with an output speed of 4.8 rpm after passing through the 240:1 gearbox. Key specifications are listed, including torque of 125 lb-in, current of 1.67A, and power output of 7 watts or 0.0096 HP. Charts show the motor's torque and efficiency characteristics across a range of speeds. The motor is intended for continuous-duty operation and has a start/stall current of 7.31A and torque of 845.8 lb-in.
Groschopp 50125 specsheet
This document provides specifications for a PM 6013 motor with a 5:1 ratio gearbox. The motor runs on 90V DC with a no-load speed of 2550 rpm. It has a rated speed of 506.6 rpm, torque of 5.4 lb-in, current of 0.73 amps, and power output of 32 watts or 0.0435 horsepower. The gearbox efficiency is 81.8%, motor efficiency is 61.9%, and system efficiency is 50.7%. Startup requires 3.76 amps and 39.89 lb-in of torque. Performance curves show torque and efficiency over speed.
Groschopp 50121 specsheet
This document provides specifications for a PM 6013 24V DC motor with a PS 1900 120:1 ratio gearbox. Key specifications include a no-load speed of 2650 rpm, rated speed of 22.1 rpm, torque of 94.1 lb-in, and current of 2.8 amps. The motor has an efficiency of 66.0%, the gearbox 57.1%, and the overall system 37.7%. Start/stall conditions are 12.40 amps current and 679.58 lb-in torque. Performance curves show efficiency and torque over speed range. The motor and gearbox assembly is sold and serviced by Electromate.
Groschopp 50115 specsheet
This document provides specifications for a PM 6013 24v DC motor with a 15:1 ratio gearbox. Key specifications include a no-load speed of 2650 rpm, rated speed of 177 rpm, torque of 16.1 lb-in, and efficiencies of 78% for the gearbox, 66% for the motor, and 51.5% for the overall system. Start/stall conditions are listed as 12.4 amps current and 99.4 lb-in torque. Speed and efficiency curves are provided for torque ranges from 0-200 lb-in.
Groschopp 50114 specsheet
This document provides specifications for a PM 6013 24V DC motor with a 10:1 ratio gearbox. Key specifications include a no load speed of 265.5 rpm, a torque of 10.8 lb-in, a current of 2.8 amps, and an output of 34 watts. The gearbox efficiency is 78.3%, the motor efficiency is 66%, and the system efficiency is 51.6%. Start/stall conditions are 12.4 amps current and 66.93 lb-in torque. Performance curves are provided showing torque, speed, rpm, and efficiency levels across a range of operating points.
Groschopp 50113 specsheet
This document provides specifications for a PM 6013 24V DC motor with a 5:1 ratio gearbox. Key specifications include a no-load speed of 531 rpm, a no-load current of 2.8 amps, a rated torque of 5.6 lb-in, and maximum efficiencies of 82.1% for the gearbox, 66% for the motor, and 54.2% for the overall system. Performance curves are provided showing torque, speed, and efficiency over a range of operating conditions.
Groschopp 50107 specsheet
This document provides specifications for a PM 6013 motor with a 12V DC voltage, 2750 RPM speed, and 20:1 ratio PS 1900 gearbox. Key specifications include an output speed of 137.5 RPM, torque of 18.3 lb-in, current of 5.5 amps, and power output of 30 watts. The motor has a continuous duty cycle and efficiency of 61.1% for the motor alone and 43.6% for the overall system. Start/stall conditions are listed as 21.88 amps current and 111.51 lb-in torque. Performance charts show torque, speed, RPM, and efficiency at varying loads.
Groschopp 50129 specsheet
The document provides specifications for a PM 6013 motor with a 30:1 ratio gearbox. It operates at 90V DC with an output speed of 84.4 rpm, torque of 26.5 lb-in, and power of 27 watts. The motor has a continuous duty cycle and efficiency of 61.9% for the motor alone and 41.4% for the combined motor and gearbox system. Startup requires 3.76 amps of current and generates 229.57 lb-in of torque. Performance curves are provided showing speed, torque, and efficiency over a range of loads.
Groschopp 50102 specsheet
This document provides specifications for a small DC motor including its voltage, speed, gearbox ratio, torque, current draw, output power, duty cycle, and efficiency ratings. Performance curves are given showing torque, speed, and efficiency over a range of operating conditions. The motor has a continuous duty cycle and peak current of 7.31 amps can produce 390.75 lb-in of torque for starting or stalling.
Groschopp 50109 specsheet
The document provides specifications for a PM 6013 12V DC motor with a 1900 gearbox and 45:1 ratio. Key specifications include a no-load speed of 2750 rpm, loaded speed of 61.1 rpm, torque of 32.6 lb-in, and efficiencies of 56.6% for the gearbox and 34.5% for the system. Performance curves show torque and efficiency at varying speeds from 0 to 225 rpm. The motor is sold and serviced by Electromate.
Groschopp 10336 specsheet
This document provides specifications for a PM 6015 motor with a 7.5:1 RA 3000T gearbox. Key specifications include a voltage of 90V DC, speed of 1600 rpm, output speed of 208.7 rpm, torque of 8.3 lb-in, current of 0.70 amps, and power output of 20 watts or 0.0273 horsepower. The gearbox efficiency is 51.9%, motor efficiency is 68%, and system efficiency is 35.3%. Start/stall conditions draw 2.33 amps and produce 47.13 lb-in of torque. Performance curves show efficiency and torque over a range of speeds.
Groschopp 50110 specsheet
This document provides specifications for a PM 6013 12V DC motor with a 60:1 ratio gearbox. Key specifications include a no load speed of 45.8 rpm, maximum torque of 43.0 lb-in, and maximum power output of 23 watts. The motor has an efficiency of 61.1% while the gearbox efficiency is 55.9% resulting in an overall system efficiency of 34.2%. Charts show torque and efficiency at varying speeds. The motor is sold and serviced by Electromate.
Groschopp 50137 specsheet
This document provides specifications for a PM 6013 motor with a PS 1900 15:1 ratio gearbox. Key specifications include a voltage of 115V, speed of 2550 rpm, output speed of 170 rpm, torque of 10.8 lb-in, current of 0.52 amps, and power output of 22 watts. The motor has an efficiency of 52% while the gearbox is 74.6% efficient, resulting in a system efficiency of 38.8%. Charts show torque and speed performance as well as efficiency at varying torque levels.
Groschopp 50138 specsheet
This document provides specifications for a small electric motor. The motor runs on 115V, has a maximum speed of 2550 RPM, and is paired with a 20:1 ratio gearbox. Key specifications include a 127.5 RPM no-load speed, 13.1 lb-in of torque, and maximum efficiency of 35.2% for the combined motor-gearbox system. Performance curves show torque, speed, and efficiency over a range of loads. The motor is suitable for continuous duty applications.
Groschopp 62304 specsheet
The document provides specifications for a PM 6015 motor with a 115V voltage, 1300 rpm speed, and a PL 7300 30:1 ratio gearbox. The motor has a rating of 43.9 rpm, 18.2 lb-in of torque, and 0.47 amps of current. The gearbox, motor, and system efficiencies are 38.1%, 54.3%, and 20.7% respectively. Under start/stall conditions, the current is 1.54 amps and torque is 202.35 lb-in.
Groschopp 50149 specsheet
This document provides specifications for a PM 6013 motor with a 40:1 ratio gearbox. Key specifications include a voltage of 130V DC, speed of 2450 rpm, output speed of 61.1 rpm, torque of 26.1 lb-in, and efficiencies of 54.1% for the gearbox and 57.3% for the motor. Performance curves are provided showing torque, speed, and efficiency over a range of operating conditions.
Groschopp 50132 specsheet
This document provides specifications for a PM 6013 motor with a 60:1 ratio gearbox. The motor runs on 90V DC with an output speed of 42.2 rpm, torque of 44.8 lb-in, and maximum efficiency of 61.9%. Performance curves are provided showing torque, speed, efficiency at varying loads. The motor has a continuous duty cycle and was manufactured by Groschopp.com.
Groschopp 62405 specsheet
This document provides specifications for a PM 6015 motor with a 115V voltage, 1300 rpm speed, and 40:1 ratio RP 7300 gearbox. Key specifications include a 32.9 rpm speed, 35.4 lb-in torque, 0.47 amp current, and 30.1% system efficiency. Start/stall conditions are 1.54 amps current and 244.63 lb-in torque. Performance curves show torque, speed, efficiency at varying loads. The motor is sold and serviced by Electromate.
Groschopp 50101 specsheet
This document provides specifications for a PM 6013 12V DC motor with a 90:1 ratio gearbox. Key specifications include a no-load speed of 10.2 rpm, maximum torque of 76.5lb-in, and maximum power output of 0.0123 HP. The motor has an efficiency of 51.9% while the gearbox efficiency is 55.3%, resulting in a system efficiency of 28.7%. Startup current and torque are 7.31 amps and 317.05 lb-in respectively. Performance curves show efficiency and torque output across a range of speeds.
Groschopp 05301 specsheet
This document provides specifications for an AC 3 Phase 8060 TEFC motor with a voltage of 230V, frequency of 50Hz, and speed of 1360rpm without a gearbox. Key specifications include a rated speed of 1355rpm, torque of 7.9lb-in, current of 1.02amps, output of 127watts, and efficiency of 56.4%. Start/stall conditions are listed as 2.69amps current and 19.94lb-in torque. A graph shows efficiency and speed curves versus torque. The motor is sold and serviced by Electromate.
Groschopp 62305 specsheet
This document provides specifications for a PM 6015 motor with a 115V voltage, 1300 rpm speed, and 40:1 ratio PL 7300 gearbox. Key specifications include a 32.9 rpm speed, 41.5lb-in torque, 0.47 amp current, and 35.3% system efficiency. Start/stall conditions are listed as 1.54 amps current and 258.49 lb-in torque. Performance curves are provided for torque, speed, rpm, and efficiency. The motor and gearbox are sold and serviced by Electromate.
Groschopp 50108 specsheet
This document provides specifications for a PM 6013 motor with a 12V DC voltage, 2750 RPM speed, and 30:1 ratio PS 1900 gearbox. Key specifications include a rated speed of 91.7 RPM, torque of 25.6 lb-in, current of 5.5 amps, and power output of 28 watts or 0.0372 HP. The gearbox efficiency is 66.6%, motor efficiency is 61.1%, and system efficiency is 40.7%. Start/stall conditions draw 21.88 amps and produce 158.53 lb-in of torque. Performance curves show torque and efficiency over a range of speeds.
Groschopp 05296 specsheet
This document provides specifications for an AC 3 Phase 8060 TEFC motor with a voltage of 230V, frequency of 50Hz, and speed of 2590rpm without a gearbox. Key specifications include a rating of 2590rpm, 0.3748HP, 69.1% efficiency, and a start/stall current of 4.33amps and torque of 18.10lb-in. A graph shows efficiency curves for the motor at different torque and speed levels when cold and hot.
Groschopp 62444 specsheet
This document provides specifications for a motor including its voltage, speed, gearbox ratio, rating, efficiency, start/stall conditions, and torque and speed curves. The motor runs at 115V and 2500 rpm with a 10:1 gearbox ratio. It has a rating of 245.2 rpm, 13.7 lb-in of torque, and 33.6% system efficiency. Under start/stall conditions it draws 7.18 amps and provides 221.19 lb-in of torque. Charts show the motor's torque and efficiency at varying speeds.
Groschopp 05157 specsheet
This document provides specifications for an AC 3 Phase 6540 TENV motor with a rating of 1207.1 rpm and 1.5 lb-in of torque consuming 0.23 amps of current. The motor produces 21 watts of output power equivalent to 0.0279 horsepower. Under breakdown and pullup conditions, the motor reaches lower speeds and higher torques. The motor has a continuous duty cycle with peak efficiencies of 36% for the gearbox, motor, and overall system. It produces higher current and torque under start or stall conditions. A graph shows efficiency decreases with increasing torque from a peak of 90% at lower torques.
Recommendation Letter - Albert Faul
Albert J. Faul has worked as the Operations Director of the Higher Institute for Water & Power Technologies (HIWPT) since August 2013. The author observed Albert lead by example through demonstrated experience and command respect from fellow workers. Under Albert's leadership, the facilities, equipment, and grounds of HIWPT showed progressive improvement in appearance and performance. Albert was also able to affect more efficient and effective behavior among subordinates and colleagues. The author recommends Albert for leadership positions requiring firmness and excellence.
Children for drawing LP
The lesson plan is for a Grade 2 art class using a drawing program. The teacher will check attendance, explain the drawing tools, demonstrate the program, and have students practice drawing shapes and pictures. The goals are for students to learn to use the drawing program and improve their knowledge of shapes. Potential issues include technical problems displaying the program and students not focusing. The teacher will focus on eye contact, voice, and movement to engage students.
Digital Marketing - LTG
This document summarizes a digital marketing workshop covering social media best practices, Facebook advertising, Google Analytics tracking, and a case study on a Black Friday promotion. The social media section discusses using platforms like Twitter to engage customers and show personality while maintaining a regular posting schedule. Facebook advertising is outlined as having a range of formats priced per click, with options to target ads by location, demographics, interests and connections. Google Analytics is presented as a free platform to track website visits and measure marketing efforts. A case study shows how a £40 Facebook ad campaign for a Black Friday flash sale resulted in over 2,000 people visiting the site and over 500 tickets sold, generating £2,720 in revenue.
More Related Content
What's hot
Groschopp 50129 specsheet
The document provides specifications for a PM 6013 motor with a 30:1 ratio gearbox. It operates at 90V DC with an output speed of 84.4 rpm, torque of 26.5 lb-in, and power of 27 watts. The motor has a continuous duty cycle and efficiency of 61.9% for the motor alone and 41.4% for the combined motor and gearbox system. Startup requires 3.76 amps of current and generates 229.57 lb-in of torque. Performance curves are provided showing speed, torque, and efficiency over a range of loads.
Groschopp 50102 specsheet
This document provides specifications for a small DC motor including its voltage, speed, gearbox ratio, torque, current draw, output power, duty cycle, and efficiency ratings. Performance curves are given showing torque, speed, and efficiency over a range of operating conditions. The motor has a continuous duty cycle and peak current of 7.31 amps can produce 390.75 lb-in of torque for starting or stalling.
Groschopp 50109 specsheet
The document provides specifications for a PM 6013 12V DC motor with a 1900 gearbox and 45:1 ratio. Key specifications include a no-load speed of 2750 rpm, loaded speed of 61.1 rpm, torque of 32.6 lb-in, and efficiencies of 56.6% for the gearbox and 34.5% for the system. Performance curves show torque and efficiency at varying speeds from 0 to 225 rpm. The motor is sold and serviced by Electromate.
Groschopp 10336 specsheet
This document provides specifications for a PM 6015 motor with a 7.5:1 RA 3000T gearbox. Key specifications include a voltage of 90V DC, speed of 1600 rpm, output speed of 208.7 rpm, torque of 8.3 lb-in, current of 0.70 amps, and power output of 20 watts or 0.0273 horsepower. The gearbox efficiency is 51.9%, motor efficiency is 68%, and system efficiency is 35.3%. Start/stall conditions draw 2.33 amps and produce 47.13 lb-in of torque. Performance curves show efficiency and torque over a range of speeds.
Groschopp 50110 specsheet
This document provides specifications for a PM 6013 12V DC motor with a 60:1 ratio gearbox. Key specifications include a no load speed of 45.8 rpm, maximum torque of 43.0 lb-in, and maximum power output of 23 watts. The motor has an efficiency of 61.1% while the gearbox efficiency is 55.9% resulting in an overall system efficiency of 34.2%. Charts show torque and efficiency at varying speeds. The motor is sold and serviced by Electromate.
Groschopp 50137 specsheet
This document provides specifications for a PM 6013 motor with a PS 1900 15:1 ratio gearbox. Key specifications include a voltage of 115V, speed of 2550 rpm, output speed of 170 rpm, torque of 10.8 lb-in, current of 0.52 amps, and power output of 22 watts. The motor has an efficiency of 52% while the gearbox is 74.6% efficient, resulting in a system efficiency of 38.8%. Charts show torque and speed performance as well as efficiency at varying torque levels.
Groschopp 50138 specsheet
This document provides specifications for a small electric motor. The motor runs on 115V, has a maximum speed of 2550 RPM, and is paired with a 20:1 ratio gearbox. Key specifications include a 127.5 RPM no-load speed, 13.1 lb-in of torque, and maximum efficiency of 35.2% for the combined motor-gearbox system. Performance curves show torque, speed, and efficiency over a range of loads. The motor is suitable for continuous duty applications.
Groschopp 62304 specsheet
The document provides specifications for a PM 6015 motor with a 115V voltage, 1300 rpm speed, and a PL 7300 30:1 ratio gearbox. The motor has a rating of 43.9 rpm, 18.2 lb-in of torque, and 0.47 amps of current. The gearbox, motor, and system efficiencies are 38.1%, 54.3%, and 20.7% respectively. Under start/stall conditions, the current is 1.54 amps and torque is 202.35 lb-in.
Groschopp 50149 specsheet
This document provides specifications for a PM 6013 motor with a 40:1 ratio gearbox. Key specifications include a voltage of 130V DC, speed of 2450 rpm, output speed of 61.1 rpm, torque of 26.1 lb-in, and efficiencies of 54.1% for the gearbox and 57.3% for the motor. Performance curves are provided showing torque, speed, and efficiency over a range of operating conditions.
Groschopp 50132 specsheet
This document provides specifications for a PM 6013 motor with a 60:1 ratio gearbox. The motor runs on 90V DC with an output speed of 42.2 rpm, torque of 44.8 lb-in, and maximum efficiency of 61.9%. Performance curves are provided showing torque, speed, efficiency at varying loads. The motor has a continuous duty cycle and was manufactured by Groschopp.com.
Groschopp 62405 specsheet
This document provides specifications for a PM 6015 motor with a 115V voltage, 1300 rpm speed, and 40:1 ratio RP 7300 gearbox. Key specifications include a 32.9 rpm speed, 35.4 lb-in torque, 0.47 amp current, and 30.1% system efficiency. Start/stall conditions are 1.54 amps current and 244.63 lb-in torque. Performance curves show torque, speed, efficiency at varying loads. The motor is sold and serviced by Electromate.
Groschopp 50101 specsheet
This document provides specifications for a PM 6013 12V DC motor with a 90:1 ratio gearbox. Key specifications include a no-load speed of 10.2 rpm, maximum torque of 76.5lb-in, and maximum power output of 0.0123 HP. The motor has an efficiency of 51.9% while the gearbox efficiency is 55.3%, resulting in a system efficiency of 28.7%. Startup current and torque are 7.31 amps and 317.05 lb-in respectively. Performance curves show efficiency and torque output across a range of speeds.
Groschopp 05301 specsheet
This document provides specifications for an AC 3 Phase 8060 TEFC motor with a voltage of 230V, frequency of 50Hz, and speed of 1360rpm without a gearbox. Key specifications include a rated speed of 1355rpm, torque of 7.9lb-in, current of 1.02amps, output of 127watts, and efficiency of 56.4%. Start/stall conditions are listed as 2.69amps current and 19.94lb-in torque. A graph shows efficiency and speed curves versus torque. The motor is sold and serviced by Electromate.
Groschopp 62305 specsheet
This document provides specifications for a PM 6015 motor with a 115V voltage, 1300 rpm speed, and 40:1 ratio PL 7300 gearbox. Key specifications include a 32.9 rpm speed, 41.5lb-in torque, 0.47 amp current, and 35.3% system efficiency. Start/stall conditions are listed as 1.54 amps current and 258.49 lb-in torque. Performance curves are provided for torque, speed, rpm, and efficiency. The motor and gearbox are sold and serviced by Electromate.
Groschopp 50108 specsheet
This document provides specifications for a PM 6013 motor with a 12V DC voltage, 2750 RPM speed, and 30:1 ratio PS 1900 gearbox. Key specifications include a rated speed of 91.7 RPM, torque of 25.6 lb-in, current of 5.5 amps, and power output of 28 watts or 0.0372 HP. The gearbox efficiency is 66.6%, motor efficiency is 61.1%, and system efficiency is 40.7%. Start/stall conditions draw 21.88 amps and produce 158.53 lb-in of torque. Performance curves show torque and efficiency over a range of speeds.
Groschopp 05296 specsheet
This document provides specifications for an AC 3 Phase 8060 TEFC motor with a voltage of 230V, frequency of 50Hz, and speed of 2590rpm without a gearbox. Key specifications include a rating of 2590rpm, 0.3748HP, 69.1% efficiency, and a start/stall current of 4.33amps and torque of 18.10lb-in. A graph shows efficiency curves for the motor at different torque and speed levels when cold and hot.
Groschopp 62444 specsheet
This document provides specifications for a motor including its voltage, speed, gearbox ratio, rating, efficiency, start/stall conditions, and torque and speed curves. The motor runs at 115V and 2500 rpm with a 10:1 gearbox ratio. It has a rating of 245.2 rpm, 13.7 lb-in of torque, and 33.6% system efficiency. Under start/stall conditions it draws 7.18 amps and provides 221.19 lb-in of torque. Charts show the motor's torque and efficiency at varying speeds.
Groschopp 05157 specsheet
This document provides specifications for an AC 3 Phase 6540 TENV motor with a rating of 1207.1 rpm and 1.5 lb-in of torque consuming 0.23 amps of current. The motor produces 21 watts of output power equivalent to 0.0279 horsepower. Under breakdown and pullup conditions, the motor reaches lower speeds and higher torques. The motor has a continuous duty cycle with peak efficiencies of 36% for the gearbox, motor, and overall system. It produces higher current and torque under start or stall conditions. A graph shows efficiency decreases with increasing torque from a peak of 90% at lower torques.
What's hot (18)
Viewers also liked
Recommendation Letter - Albert Faul
Albert J. Faul has worked as the Operations Director of the Higher Institute for Water & Power Technologies (HIWPT) since August 2013. The author observed Albert lead by example through demonstrated experience and command respect from fellow workers. Under Albert's leadership, the facilities, equipment, and grounds of HIWPT showed progressive improvement in appearance and performance. Albert was also able to affect more efficient and effective behavior among subordinates and colleagues. The author recommends Albert for leadership positions requiring firmness and excellence.
Children for drawing LP
The lesson plan is for a Grade 2 art class using a drawing program. The teacher will check attendance, explain the drawing tools, demonstrate the program, and have students practice drawing shapes and pictures. The goals are for students to learn to use the drawing program and improve their knowledge of shapes. Potential issues include technical problems displaying the program and students not focusing. The teacher will focus on eye contact, voice, and movement to engage students.
Digital Marketing - LTG
This document summarizes a digital marketing workshop covering social media best practices, Facebook advertising, Google Analytics tracking, and a case study on a Black Friday promotion. The social media section discusses using platforms like Twitter to engage customers and show personality while maintaining a regular posting schedule. Facebook advertising is outlined as having a range of formats priced per click, with options to target ads by location, demographics, interests and connections. Google Analytics is presented as a free platform to track website visits and measure marketing efforts. A case study shows how a £40 Facebook ad campaign for a Black Friday flash sale resulted in over 2,000 people visiting the site and over 500 tickets sold, generating £2,720 in revenue.
MY CV
Stephen Chukwuka Ogbodoh is seeking a position that utilizes his organizational skills and ability to work independently or as part of a team. He has a Master's degree in Mass Communication from the University of Nigeria, Nsukka as well as work experience in marketing research, teaching, and journalism. His skills include strong communication abilities, a drive to learn, and a team-oriented work style.
Resume_Randall Griggs_20160825
Randall Griggs has over 15 years of experience in data analytics, business management, and engineering. He currently works as a Maintenance Improvement Specialist focusing on data analytics. Griggs has degrees in Mechanical Engineering, Mathematics, and Economics and has worked as a quantitative researcher, estimator, tutor, and tour driver. He is skilled in identifying and solving problems, working independently or as part of a team, and communicating effectively. Griggs is seeking to further apply his skills and experience through commitment to excellence and high professional standards.
Apresentação semas 24 02 2011 cerbcaa ipa
O documento discute a criação de unidades de conservação em Serra Talhada, Pernambuco. A área de Fazenda Saco foi identificada como prioritária devido à sua biodiversidade e está sendo considerada para proteção como uma unidade de conservação municipal. Várias reuniões foram realizadas com autoridades locais e instituições para mapear a área e definir os limites da unidade de conservação proposta.
Marita's cronograma
El documento presenta dos cronogramas de actividades para una estudiante de licenciatura en educación preescolar en el Centro Regional de Educación Normal "Dr. Gonzalo Aguirre Beltrán". El primer cronograma detalla las actividades de la semana del 12 al 16 de octubre e incluye actividades como "Jugando para aprender", desayuno y entrega de niños. El segundo cronograma es de la semana del 7 al 11 de diciembre e incluye actividades numeradas, recreo, ensayo para una obra y la interpretación de la obra.
Economic Downturn
The document discusses several factors that contributed to the global economic downturn from 2014-2016, including a slowdown in China's growth, China's devaluation of the yuan in 2015, a slump in oil and commodity prices, Greece's debt crisis, and a global stock market downturn in 2015-2016. It predicts that the US economy will remain solid at 2.5-3% growth in 2016 while China's growth will further decelerate to 6.3% due to ongoing problems in heavy industry sectors. Emerging markets like Brazil and Russia will likely remain in recession, and growth will be disappointing for most other emerging markets due to weak global conditions. Overall, barring a major geopolitical crisis, the global
Shafaf FAQs
Shafaf is a complaint and feedback management system that allows organizations to receive, track, and respond to complaints and feedback online through a transparent and easy-to-use web-based system. It provides automated email and SMS notifications to keep complainants updated on the status of their complaints. The system generates reports on complaints that help organizations improve transparency and accountability. It can be used by various types of organizations, including non-profits and government agencies.
Hacking and its types
The document discusses the history and types of hacking. It begins with definitions of hacking and hackers, then discusses the history of hacking emerging in the 1960s at MIT. It outlines famous hackers from history and reasons people hack, such as for fun or to show off skills. The document categorizes different types of hacking like website, network, and password hacking. It provides tips on securing data and accounts, as well as advantages and disadvantages of hacking. In conclusion, it emphasizes the importance of secure passwords and being aware of website security indicators.
Dolor de rodillas
Este documento discute que el dolor de rodilla a menudo se diagnostica incorrectamente como desgarros meniscales o artrosis, cuando en realidad la causa subyacente más común es la debilidad muscular. Los músculos débiles de la cadera y muslo pueden causar una mala alineación de la rodilla y dolor. Un enfoque más efectivo para el tratamiento del dolor de rodilla es fortalecer los músculos débiles alrededor de la articulación.
Viewers also liked (12)
150.выбор лучшего способа защиты электрических аппаратов в опасных зонах
150.выбор лучшего способа защиты электрических аппаратов в опасных зонах
Similar to Groschopp 50104 specsheet
Groschopp 50111 specsheet
This document provides specifications for a PM 6013 12V DC motor with a PS 1900 90:1 ratio gearbox. Key specifications include a no-load speed of 2750 rpm, rated speed of 30.6 rpm, rated torque of 56.1 lb-in, and maximum efficiency of 61.1% for the motor. The gearbox has an efficiency of 48.6% and the overall system efficiency is 29.7%. Charts show the motor's torque and efficiency curves across a range of speeds.
Groschopp 50106 specsheet
This document provides specifications for a small PM 6013 motor with a 12V DC voltage, 2750 RPM speed, and 15:1 ratio gearbox. The motor has a rating of 183.3 RPM speed, 14.9 lb-in torque, and 47.3% system efficiency. It also lists start/stall conditions of 21.88 amps current and 81.42 lb-in torque. Charts show torque, speed, efficiency, and temperature performance. The motor is sold and serviced by Electromate.
Groschopp 50122 specsheet
This document provides specifications for a PM 6013 90V DC motor with a 5:1 ratio gearbox. The motor runs at 1700 rpm and outputs 337 rpm, 5.9 lb-in of torque, and 0.0313 HP at 0.54 amps and 23 watts continuously. The gearbox efficiency is 82.4%, motor efficiency is 58.7%, and system efficiency is 48.3%. Start/stall conditions draw 2.19 amps and produce 31.17 lb-in of torque. Performance curves show torque, speed, rpm and efficiency at varying loads. The motor is sold and serviced by Electromate.
Groschopp 50133 specsheet
This document provides specifications for a PM 6013 motor with a 90V DC voltage, 2550 RPM speed, and PS 1900 90:1 ratio gearbox. The motor has a rating of 28.1 RPM speed, 59.3lb-in torque, 0.73 amps current, and 20 watts output power. Efficiency ratings are provided for the gearbox, motor, and overall system. Start/stall conditions and torque-speed curves are also included, along with supplier contact information.
Groschopp 50135 specsheet
This document provides specifications for a PM 6013 motor with a 5:1 ratio gearbox. The motor runs on 115V and has a no-load speed of 2550 RPM. Key specifications include a loaded speed of 509.9 RPM, torque of 3.8 lb-in, current of 0.52 amps, and power output of 23 watts or 0.0308 HP. The gearbox and motor efficiencies are 78.6% and 52% respectively, yielding a system efficiency of 40.8%. Startup requires 2.52 amps and 33.86 lb-in of torque. Performance curves show torque, speed, and efficiency at varying RPM.
Groschopp 50134 specsheet
The document provides specifications for a PM 6013 motor with a 120:1 ratio gearbox. The motor runs at 90V DC and 2550 rpm, with an output of 21.1 rpm, 87.9 lb-in of torque, and 0.0294 HP. The gearbox has an efficiency of 55.4% while the motor is 61.9% efficient, resulting in a system efficiency of 34.3%. Charts show the motor's torque and speed performance as well as efficiency at varying torque levels.
Groschopp 50143 specsheet
This document provides specifications for a PM 6013 motor with a 115V voltage and 2550 rpm speed, paired with a PS 1900 gearbox with a 120:1 ratio. Key specifications include a rated speed of 21.2 rpm, torque of 48.9 lb-in, and efficiency ratings of 42% for the gearbox, 52% for the motor, and 21.8% for the overall system. Start/stall conditions are listed as 2.52 amps current and 668.03 lb-in torque. A graph shows efficiency across a range of torques and speeds.
Groschopp 50136 specsheet
This document provides specifications for a small electric motor. The motor runs on 115V, has a no-load speed of 2550 RPM, and includes a 10:1 ratio gearbox. Key specifications include a rated speed of 255 RPM, torque of 7.2 lb-in, current draw of 0.52 amps, and power output of 22 watts or 0.0293 horsepower. Charts show torque and efficiency at varying speeds. The motor has a start/stall current of 2.52 amps and torque of 65.78 lb-in.
Groschopp 50142 specsheet
This document provides specifications for a PM 6013 motor with a 115V voltage and 2550 rpm speed, paired with a PS 1900 gearbox with a 90:1 ratio. Key specifications outlined include a maximum torque of 33.5lb-in, current of 0.52 amps, and power output of 11 watts. The motor has a continuous duty cycle and efficiency of 52%, while the gearbox is 38.4% efficient and the overall system efficiency is 20%. Start/stall conditions draw 2.52 amps and produce 558.66 lb-in of torque. Performance curves show torque and speed output over RPM.
Groschopp 50131 specsheet
The document provides specifications for a PM 6013 motor with a 45:1 ratio gearbox. The motor runs on 90V DC with an output speed of 56.3 rpm, torque of 33.9 lb-in, and maximum efficiency of 61.9%. Charts show the motor's torque and efficiency across different speeds.
Groschopp 50141 specsheet
This document provides specifications for a PM 6013 motor with a PS 1900 60:1 ratio gearbox. Key specifications include a voltage of 115V, speed of 2550 rpm, output speed of 42.5 rpm, torque of 30.8 lb-in, current of 0.52 amps, and power output of 15 watts. The motor efficiency is 52.0%, gearbox efficiency is 52.9%, and system efficiency is 27.5%. Start/stall current is 2.52 amps and torque is 378.27 lb-in. Speed and efficiency curves are provided for the motor and system. The motor and gearbox combination is sold and serviced by Electromate.
Groschopp 50144 specsheet
This document provides specifications for a PM 6013 130V DC motor with a 5:1 ratio gearbox. The motor runs at 2450 RPM single phase and outputs 489 RPM, 4.9 lb-in of torque, and 0.0378 HP continuously at 57.3% efficiency when new. Startup draws 2.05 amps and produces 32.66 lb-in of torque. Performance curves show torque, speed, and efficiency over operating range. The motor and gearbox system has an overall efficiency of 46.4%.
Groschopp 50112 specsheet
This document provides specifications for a PM 6013 12V DC motor with a 1900:1 ratio gearbox. Key specifications include a no-load speed of 2750 RPM, rated speed of 22.9 RPM, torque of 83.2 lb-in, and efficiencies of 54.1% for the gearbox and 33% for the system. Performance curves are provided showing torque, speed, efficiency at varying loads. The motor can operate continuously with start/stall conditions drawing 21.88 amps and producing 558.27 lb-in of torque.
Groschopp 50120 specsheet
This document provides specifications for a PM 6013 24V DC motor with a 2650 rpm speed and a PS 1900 90:1 ratio gearbox. Key specifications include a rated speed of 29.5 rpm, torque of 63.4 lb-in, current of 2.8 amps, and power output of 22 watts or 0.0297 horsepower. The gearbox efficiency is 51.3%, motor efficiency is 66%, and system efficiency is 33.8%. Start/stall conditions are 12.4 amps current and 568.73 lb-in torque. Performance curves show torque and efficiency over speed.
Groschopp 50145 specsheet
This document provides specifications for a PM 6013 motor with a 10:1 gearbox. The motor runs at 130V DC with a no load speed of 2450 rpm. Key specifications include a rated output of 244.5 rpm and 9.3 lb-in of torque drawing 0.45 amps of current. The gearbox and motor have efficiencies of 77.0% and 57.3% respectively, yielding a system efficiency of 44.1%. Performance curves show torque, speed, and efficiency over a range of RPM.
Groschopp 50128 specsheet
This document provides specifications for a PM 6013 motor powered by 90V DC with a 20:1 ratio gearbox. The motor runs at 2550 rpm and produces 126.7 rpm and 19.0 lb-in of torque at the output. It has a continuous duty cycle and system efficiency of 44.5%. Start/stall conditions produce 3.76 amps of current and 158.47 lb-in of torque. Performance curves show torque, speed, and efficiency at varying loads. The motor is sold and serviced by Electromate.
Groschopp 50116 specsheet
This document provides specifications for a PM 6013 motor with a 24V DC voltage and 2650 RPM speed that is connected to a PS 1900 20:1 ratio gearbox. The motor has a rating of 132.8 RPM and 19.9 lb-in of torque at 2.8 amps of current. The gearbox and motor efficiencies are 72.3% and 66% respectively, yielding a system efficiency of 47.7%. Start/stall conditions are 12.4 amps of current and 136.8 lb-in of torque. Performance curves are provided for speed, torque, and efficiency. The motor is sold and serviced by Electromate.
Groschopp 50140 specsheet
This document provides specifications for a PM 6013 motor with a 40:1 gearbox. Key specifications include a voltage of 115V, speed of 2550 rpm, output torque of 19.1 lb-in, output power of 14 watts, and efficiency ratings of 49.2% for the gearbox and 25.6% for the system. Performance curves are provided showing torque, speed, and efficiency over a range of operating conditions.
Groschopp 50127 specsheet
This document provides specifications for a PM 6013 motor with a 15:1 ratio gearbox. The motor runs on 90V DC with a top speed of 2550 rpm. Key specifications include a rated speed of 168.9 rpm, torque of 15.4 lb-in, and current draw of 0.73 amps producing 31 watts of power. The gearbox and motor have efficiencies of 77.7% and 61.9% respectively, yielding a system efficiency of 48.1%. Startup requires 3.76 amps and generates 114.75 lb-in of torque. Performance curves show speed, torque, efficiency and rpm values over a range of torques from 0-180 lb-in.
Groschopp 10346 specsheet
This document provides specifications for a PM 6015 130V DC motor with a 5:1 ratio RA 2600T gearbox. Key specifications include a no-load speed of 509.6 rpm, a no-load torque of 4.6 lb-in, a continuous duty cycle, and system efficiency of 33.8%. Performance curves show torque, speed, and efficiency over a range of torque values from 0-60 lb-in.
Similar to Groschopp 50104 specsheet (20)
More from Electromate
Automated screw thread quality checking using SMAC LAR55 actuator new produc...
The document discusses an automated screw thread quality checking solution using SMAC LAR55 actuators. It allows 100% inspection of screw threads to check for issues like oversizing, cross-threading, depth, and pitch. This can help automakers meet higher quality standards by eliminating defective parts and providing immediate feedback. The LAR55's precision Z-theta motion makes it suitable for automatically checking screw threads.
An overview of the various kinematic models in both parallel and serial robot...
This document provides an overview of kinematic models for parallel and serial robotic mechanisms and their suitability for precision applications. It introduces Ilian Bonev, a professor at École de technologie supérieure who is an expert in parallel robots and precision robotics. It then describes some parallel robots that have been developed at the Control and Robotics Laboratory including ones for medical, manufacturing, and research applications. The document concludes with sections on robot calibration methods and the differences between serial and parallel mechanisms.
Galil motion control robotic symposium presentation-linear motion from non-li...
The document discusses non-linear robotic motion control solutions. It describes how Galil Motion Control provides controllers for various types of non-linear robots like SCARA and delta robots. It covers topics like selecting the robot topology, designing each joint, motor selection, forward and inverse kinematics equations, vibration reduction techniques, and examples of implementing motion control for SCARA robots.
Advanced motion controls robotics symposium presentation-open standard tools ...
This document discusses the development of control software for a linear delta robot used in 3D printing. It describes using PLCopen function blocks and XML files to create reusable software components for robot kinematics and handling G-code from slicing programs. Function block diagrams are created to process G-code, set coordinate systems, and represent the overall project logic. The solution involves creating user-defined function blocks to handle the robot's inverse kinematics and translate G-code commands into motions.
Maxon motor ag robotic symposium presentation-impedance control overview and ...
The document discusses impedance control, an approach to robot control that models mechanical systems as electrical circuits using impedance. It defines electrical and mechanical impedance analogously and describes how components like resistors, inductors, and capacitors correspond to dampers, masses, and springs physically. The document outlines applications of impedance control and emphasizes the importance of selecting low-inertia motors, high-efficiency gears, and fast, accurate sensors and controllers. Overall, the document argues that impedance control requires creative engineering of mechanical designs and electrical components.
Kollmorgen robotic symposium presentation-motor design impacts on the optimiz...
The document discusses how motor design impacts the optimization of robotic systems. It explains that frameless motors can enable smaller, lighter and faster robots through their direct drive capabilities and high torque density. The document also covers various motor topologies and important concepts like torque constant, motor size constant, and how they relate to continuous torque capacity, efficiency and losses. Application examples discussed include collaborative robots, surgical robots, and mobile robots.
Harmonic drive llc robotics symposium presentation-designing from the inside ...
The document discusses defining robot performance requirements and how customized solutions from Harmonic Drive can help meet those requirements. It provides an overview of Harmonic Drive's product line and gear technologies, then discusses how mechanical modifications and performance customizations can be made to their gear components and systems to optimize robots for specific design requirements and applications. Customizations like increased accuracy, stiffness, torque properties and materials can be made, with varying levels of difficulty and cost implications discussed.
Thomson Linear Dual Shaft Rail 2DA Modular Specs
This document provides specifications and dimensional drawings for Thomson Industries' Dual Shaft Rail linear guides with modular carriages. It includes part numbers, dimensions, load ratings and descriptions of the components. Linear guides use dual linear race shaft rails and modular carriages with open type Super Smart Ball Bushings. They are used in continuously supported applications requiring rigidity and are adaptable to any drive system.
Thomson Linear 2DA QuickSlide System with Brake
This document provides specifications for Thomson Industries' 2DA QuickSlide system with brake, including:
- It offers manual locking with infinite positioning, no carriage surface deflection when locked, and immediate availability in common sizes.
- The locking mechanism does not increase load on the bearing and allows zero axial movement during locking.
- It provides a fully supported dual shaft assembly for maximum rigidity and unlimited travel.
Thomson Linear RoundRail 2CA Web Universal Carriage Specs
This document contains specifications for Thomson Industries' Twin Shaft Web Linear Guide system. It includes dimensions, part numbers, load ratings and descriptions of the components. The linear guides use a double shaft and welded web design for improved torque strength and deflection characteristics. They are designed to move medium loads with low friction and are commonly used when bridging gaps.
Thomson Linear RoundRail 1VC Double End Supported Specs
The document provides specifications for various FluoroNyliner linear guide components including:
- Pillow blocks, twin pillow blocks, shaft end support blocks, and mounting table tops for different size linear guides ranging from 0.375 to 1.5 inches in diameter.
- It lists the part numbers, dimensions, materials, weights, and other specifications for each component.
- It also includes an illustration of a double end supported linear guide system with pillow blocks, shafts, end supports, and a size B mounting table top.
Thomson Linear RoundRail 2CA Web Flanged Carriage Specs
This document provides specifications for Thomson Industries' Twin Shaft Web Linear Guide system. It includes dimensions, load capacity information, and part numbers for various components of the 2CA linear guide, which features a flanged carriage design and double linear race shaft for improved torque and deflection characteristics. Configuration and installation details are also listed.
Thomson Linear RoundRail Twin Shaft Web 2CA
The document provides specifications for Thomson RoundRail linear guides and components. It includes dimensions, features, and part numbering for twin shaft web linear guides in both vertical and horizontal configurations ranging from 0.5 to 1 inch in diameter. Load capacity charts are provided for different guide sizes and configurations that can support loads between 165 to 3000 pounds depending on the model. Maximum guide lengths are listed as 72 inches and engineering calculations for shaft deflection are also noted.
Thomson Linear RoundRail 1VC Double Unsupported Specs
The document contains specifications for various FluoroNyliner linear guide parts, including dimensions, part numbers, materials, load ratings, and performance notes. It lists 14 different linear guide parts with nominal diameters ranging from 0.375 to 1.5 inches. For each part, it provides dimensions for components like bearing blocks, carriages, and table tops. It also includes general information on specifying linear guides and product notes on materials and lubrication.
Thomson Linear WhisperTrak Actuators
The Thomson WhisperTrak electric linear actuator offers a compact, quiet, and durable solution for applications requiring linear motion. It is particularly well-suited for personal mobility, medical, and rehabilitation equipment due to its small size and silent operation. The actuator provides reliable, maintenance-free movement and has an IP67 rating, making it protected against water and dust. Its flexibility and high performance in a small package make it suitable for a wide range of industries.
Thomson T-Series Profile Rail
The document provides information on the T-Series Ball Profile Rail from Thomson, including:
- It is lightweight, highly flexible, and forgiving, making it suitable for applications with poor misalignment.
- It has a low cost of installation as it can be mounted directly to non-machined bases without special tools.
- It offers industry standard dimensions and dimensions interchangeable with other rail brands, allowing for easy replacement.
Thomson Linear RoundRail Accessories Collapsable Bellows Specs
This document provides specifications for various bellows that can be used to protect slides and shafts. It lists different part numbers for bellows with a range of nominal shaft diameters from 1/4 to 1 1/2 inches. The bellows are made of polyester cover and PVC stiffeners. Dimensions such as length, width, and height are provided for each part number. Some bellows are single shaft while others are dual shaft or for horizontal vs vertical systems. Each bellows comes with attachment pieces like Velcro or mounting brackets.
Thomson Linear Roundrail Dual Shaft Rail 2DA Specs
The document provides specifications for Danaher Motion's dual shaft rail linear guides with integrated carriages. It includes dimensions, load ratings, dynamic capacities, and part numbering for the 2DA series linear guides available in nominal diameters of 0.5, 0.75, and 1.0 inches. Both full and short length carriage options are detailed along with components, material specifications, and the supplier contact information.
Thomson Linear RoundRail Continuous Support 1PC Specs
This document provides specifications for various linear guide assemblies with table tops from Thomson Industries. It includes dimensions, part numbers, load ratings and limit data for single rail linear guides with sizes ranging from M12 to M40 diameter in configurations with 4 pillow blocks, 2 twin pillow blocks or no pillow blocks and size E or F table tops. Mounting details and specifications are provided for the various components including rails, pillow blocks and table tops.
Thomson Linear RoundRail Continuous Support 1PB Specs
The document contains specifications for various continuously supported linear guide assemblies and their components. It lists part numbers, dimensions, load ratings, and other technical specifications for linear guides, support rails, pillow blocks, and bearings. Materials include aluminum alloys and bearings include ball bushings. Linear guides are specified by part number plus length and provide continuous support for applications requiring rigidity.
More from Electromate (20)
Automated screw thread quality checking using SMAC LAR55 actuator new produc...
Automated screw thread quality checking using SMAC LAR55 actuator new produc...
An overview of the various kinematic models in both parallel and serial robot...
An overview of the various kinematic models in both parallel and serial robot...
Galil motion control robotic symposium presentation-linear motion from non-li...
Galil motion control robotic symposium presentation-linear motion from non-li...
Advanced motion controls robotics symposium presentation-open standard tools ...
Advanced motion controls robotics symposium presentation-open standard tools ...
Maxon motor ag robotic symposium presentation-impedance control overview and ...
Maxon motor ag robotic symposium presentation-impedance control overview and ...
Kollmorgen robotic symposium presentation-motor design impacts on the optimiz...
Kollmorgen robotic symposium presentation-motor design impacts on the optimiz...
Harmonic drive llc robotics symposium presentation-designing from the inside ...
Harmonic drive llc robotics symposium presentation-designing from the inside ...
Thomson Linear RoundRail 2CA Web Universal Carriage Specs
Thomson Linear RoundRail 2CA Web Universal Carriage Specs
Thomson Linear RoundRail 1VC Double End Supported Specs
Thomson Linear RoundRail 1VC Double End Supported Specs
Thomson Linear RoundRail 2CA Web Flanged Carriage Specs
Thomson Linear RoundRail 2CA Web Flanged Carriage Specs
Thomson Linear RoundRail 1VC Double Unsupported Specs
Thomson Linear RoundRail 1VC Double Unsupported Specs
Thomson Linear RoundRail Accessories Collapsable Bellows Specs
Thomson Linear RoundRail Accessories Collapsable Bellows Specs
Thomson Linear Roundrail Dual Shaft Rail 2DA Specs
Thomson Linear Roundrail Dual Shaft Rail 2DA Specs
Thomson Linear RoundRail Continuous Support 1PC Specs
Thomson Linear RoundRail Continuous Support 1PC Specs
Thomson Linear RoundRail Continuous Support 1PB Specs
Thomson Linear RoundRail Continuous Support 1PB Specs
Recently uploaded
A tale of scale & speed: How the US Navy is enabling software delivery from l...
Rapid and secure feature delivery is a goal across every application team and every branch of the DoD. The Navy’s DevSecOps platform, Party Barge, has achieved:
- Reduction in onboarding time from 5 weeks to 1 day
- Improved developer experience and productivity through actionable findings and reduction of false positives
- Maintenance of superior security standards and inherent policy enforcement with Authorization to Operate (ATO)
Development teams can ship efficiently and ensure applications are cyber ready for Navy Authorizing Officials (AOs). In this webinar, Sigma Defense and Anchore will give attendees a look behind the scenes and demo secure pipeline automation and security artifacts that speed up application ATO and time to production.
We will cover:
- How to remove silos in DevSecOps
- How to build efficient development pipeline roles and component templates
- How to deliver security artifacts that matter for ATO’s (SBOMs, vulnerability reports, and policy evidence)
- How to streamline operations with automated policy checks on container images
Removing Uninteresting Bytes in Software Fuzzing
Imagine a world where software fuzzing, the process of mutating bytes in test seeds to uncover hidden and erroneous program behaviors, becomes faster and more effective. A lot depends on the initial seeds, which can significantly dictate the trajectory of a fuzzing campaign, particularly in terms of how long it takes to uncover interesting behaviour in your code. We introduce DIAR, a technique designed to speedup fuzzing campaigns by pinpointing and eliminating those uninteresting bytes in the seeds. Picture this: instead of wasting valuable resources on meaningless mutations in large, bloated seeds, DIAR removes the unnecessary bytes, streamlining the entire process.
In this work, we equipped AFL, a popular fuzzer, with DIAR and examined two critical Linux libraries -- Libxml's xmllint, a tool for parsing xml documents, and Binutil's readelf, an essential debugging and security analysis command-line tool used to display detailed information about ELF (Executable and Linkable Format). Our preliminary results show that AFL+DIAR does not only discover new paths more quickly but also achieves higher coverage overall. This work thus showcases how starting with lean and optimized seeds can lead to faster, more comprehensive fuzzing campaigns -- and DIAR helps you find such seeds.
- These are slides of the talk given at IEEE International Conference on Software Testing Verification and Validation Workshop, ICSTW 2022.
20 Comprehensive Checklist of Designing and Developing a Website
Dive into the world of Website Designing and Developing with Pixlogix! Looking to create a stunning online presence? Look no further! Our comprehensive checklist covers everything you need to know to craft a website that stands out. From user-friendly design to seamless functionality, we've got you covered. Don't miss out on this invaluable resource! Check out our checklist now at Pixlogix and start your journey towards a captivating online presence today.
Generative AI Deep Dive: Advancing from Proof of Concept to Production
Join Maher Hanafi, VP of Engineering at Betterworks, in this new session where he'll share a practical framework to transform Gen AI prototypes into impactful products! He'll delve into the complexities of data collection and management, model selection and optimization, and ensuring security, scalability, and responsible use.
UiPath Test Automation using UiPath Test Suite series, part 5
Welcome to UiPath Test Automation using UiPath Test Suite series part 5. In this session, we will cover CI/CD with devops.
Topics covered:
CI/CD with in UiPath
End-to-end overview of CI/CD pipeline with Azure devops
Speaker:
Lyndsey Byblow, Test Suite Sales Engineer @ UiPath, Inc.
“I’m still / I’m still / Chaining from the Block”
“An Outlook of the Ongoing and Future Relationship between Blockchain Technologies and Process-aware Information Systems.” Invited talk at the joint workshop on Blockchain for Information Systems (BC4IS) and Blockchain for Trusted Data Sharing (B4TDS), co-located with with the 36th International Conference on Advanced Information Systems Engineering (CAiSE), 3 June 2024, Limassol, Cyprus.
Enchancing adoption of Open Source Libraries. A case study on Albumentations.AI
Enchancing adoption of Open Source Libraries. A case study on Albumentations.AIVladimir Iglovikov, Ph.D.
Presented by Vladimir Iglovikov:
- https://www.linkedin.com/in/iglovikov/
- https://x.com/viglovikov
- https://www.instagram.com/ternaus/
This presentation delves into the journey of Albumentations.ai, a highly successful open-source library for data augmentation.
Created out of a necessity for superior performance in Kaggle competitions, Albumentations has grown to become a widely used tool among data scientists and machine learning practitioners.
This case study covers various aspects, including:
People: The contributors and community that have supported Albumentations.
Metrics: The success indicators such as downloads, daily active users, GitHub stars, and financial contributions.
Challenges: The hurdles in monetizing open-source projects and measuring user engagement.
Development Practices: Best practices for creating, maintaining, and scaling open-source libraries, including code hygiene, CI/CD, and fast iteration.
Community Building: Strategies for making adoption easy, iterating quickly, and fostering a vibrant, engaged community.
Marketing: Both online and offline marketing tactics, focusing on real, impactful interactions and collaborations.
Mental Health: Maintaining balance and not feeling pressured by user demands.
Key insights include the importance of automation, making the adoption process seamless, and leveraging offline interactions for marketing. The presentation also emphasizes the need for continuous small improvements and building a friendly, inclusive community that contributes to the project's growth.
Vladimir Iglovikov brings his extensive experience as a Kaggle Grandmaster, ex-Staff ML Engineer at Lyft, sharing valuable lessons and practical advice for anyone looking to enhance the adoption of their open-source projects.
Explore more about Albumentations and join the community at:
GitHub: https://github.com/albumentations-team/albumentations
Website: https://albumentations.ai/
LinkedIn: https://www.linkedin.com/company/100504475
Twitter: https://x.com/albumentationsGraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
Dr. Sean Tan, Head of Data Science, Changi Airport Group
Discover how Changi Airport Group (CAG) leverages graph technologies and generative AI to revolutionize their search capabilities. This session delves into the unique search needs of CAG’s diverse passengers and customers, showcasing how graph data structures enhance the accuracy and relevance of AI-generated search results, mitigating the risk of “hallucinations” and improving the overall customer journey.
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024
Neha Bajwa, Vice President of Product Marketing, Neo4j
Join us as we explore breakthrough innovations enabled by interconnected data and AI. Discover firsthand how organizations use relationships in data to uncover contextual insights and solve our most pressing challenges – from optimizing supply chains, detecting fraud, and improving customer experiences to accelerating drug discoveries.
How to Get CNIC Information System with Paksim Ga.pptx
Pakdata Cf is a groundbreaking system designed to streamline and facilitate access to CNIC information. This innovative platform leverages advanced technology to provide users with efficient and secure access to their CNIC details.
Pushing the limits of ePRTC: 100ns holdover for 100 days
At WSTS 2024, Alon Stern explored the topic of parametric holdover and explained how recent research findings can be implemented in real-world PNT networks to achieve 100 nanoseconds of accuracy for up to 100 days.
UiPath Test Automation using UiPath Test Suite series, part 6
Welcome to UiPath Test Automation using UiPath Test Suite series part 6. In this session, we will cover Test Automation with generative AI and Open AI.
UiPath Test Automation with generative AI and Open AI webinar offers an in-depth exploration of leveraging cutting-edge technologies for test automation within the UiPath platform. Attendees will delve into the integration of generative AI, a test automation solution, with Open AI advanced natural language processing capabilities.
Throughout the session, participants will discover how this synergy empowers testers to automate repetitive tasks, enhance testing accuracy, and expedite the software testing life cycle. Topics covered include the seamless integration process, practical use cases, and the benefits of harnessing AI-driven automation for UiPath testing initiatives. By attending this webinar, testers, and automation professionals can gain valuable insights into harnessing the power of AI to optimize their test automation workflows within the UiPath ecosystem, ultimately driving efficiency and quality in software development processes.
What will you get from this session?
1. Insights into integrating generative AI.
2. Understanding how this integration enhances test automation within the UiPath platform
3. Practical demonstrations
4. Exploration of real-world use cases illustrating the benefits of AI-driven test automation for UiPath
Topics covered:
What is generative AI
Test Automation with generative AI and Open AI.
UiPath integration with generative AI
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
Alt. GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using ...
Effective Application Security in Software Delivery lifecycle using Deployment Firewall and DBOM
The modern software delivery process (or the CI/CD process) includes many tools, distributed teams, open-source code, and cloud platforms. Constant focus on speed to release software to market, along with the traditional slow and manual security checks has caused gaps in continuous security as an important piece in the software supply chain. Today organizations feel more susceptible to external and internal cyber threats due to the vast attack surface in their applications supply chain and the lack of end-to-end governance and risk management.
The software team must secure its software delivery process to avoid vulnerability and security breaches. This needs to be achieved with existing tool chains and without extensive rework of the delivery processes. This talk will present strategies and techniques for providing visibility into the true risk of the existing vulnerabilities, preventing the introduction of security issues in the software, resolving vulnerabilities in production environments quickly, and capturing the deployment bill of materials (DBOM).
Speakers:
Bob Boule
Robert Boule is a technology enthusiast with PASSION for technology and making things work along with a knack for helping others understand how things work. He comes with around 20 years of solution engineering experience in application security, software continuous delivery, and SaaS platforms. He is known for his dynamic presentations in CI/CD and application security integrated in software delivery lifecycle.
Gopinath Rebala
Gopinath Rebala is the CTO of OpsMx, where he has overall responsibility for the machine learning and data processing architectures for Secure Software Delivery. Gopi also has a strong connection with our customers, leading design and architecture for strategic implementations. Gopi is a frequent speaker and well-known leader in continuous delivery and integrating security into software delivery.
20240605 QFM017 Machine Intelligence Reading List May 2024
Everything I found interesting about machines behaving intelligently during May 2024
Climate Impact of Software Testing at Nordic Testing Days
My slides at Nordic Testing Days 6.6.2024
Climate impact / sustainability of software testing discussed on the talk. ICT and testing must carry their part of global responsibility to help with the climat warming. We can minimize the carbon footprint but we can also have a carbon handprint, a positive impact on the climate. Quality characteristics can be added with sustainability, and then measured continuously. Test environments can be used less, and in smaller scale and on demand. Test techniques can be used in optimizing or minimizing number of tests. Test automation can be used to speed up testing.
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
The choice of an operating system plays a pivotal role in shaping our computing experience. For decades, Microsoft's Windows has dominated the market, offering a familiar and widely adopted platform for personal and professional use. However, as technological advancements continue to push the boundaries of innovation, alternative operating systems have emerged, challenging the status quo and offering users a fresh perspective on computing.
One such alternative that has garnered significant attention and acclaim is Nitrux Linux 3.5.0, a sleek, powerful, and user-friendly Linux distribution that promises to redefine the way we interact with our devices. With its focus on performance, security, and customization, Nitrux Linux presents a compelling case for those seeking to break free from the constraints of proprietary software and embrace the freedom and flexibility of open-source computing.
Essentials of Automations: The Art of Triggers and Actions in FME
In this second installment of our Essentials of Automations webinar series, we’ll explore the landscape of triggers and actions, guiding you through the nuances of authoring and adapting workspaces for seamless automations. Gain an understanding of the full spectrum of triggers and actions available in FME, empowering you to enhance your workspaces for efficient automation.
We’ll kick things off by showcasing the most commonly used event-based triggers, introducing you to various automation workflows like manual triggers, schedules, directory watchers, and more. Plus, see how these elements play out in real scenarios.
Whether you’re tweaking your current setup or building from the ground up, this session will arm you with the tools and insights needed to transform your FME usage into a powerhouse of productivity. Join us to discover effective strategies that simplify complex processes, enhancing your productivity and transforming your data management practices with FME. Let’s turn complexity into clarity and make your workspaces work wonders!
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
ABSTRACT: A prima vista, un mattoncino Lego e la backdoor XZ potrebbero avere in comune il fatto di essere entrambi blocchi di costruzione, o dipendenze di progetti creativi e software. La realtà è che un mattoncino Lego e il caso della backdoor XZ hanno molto di più di tutto ciò in comune.
Partecipate alla presentazione per immergervi in una storia di interoperabilità, standard e formati aperti, per poi discutere del ruolo importante che i contributori hanno in una comunità open source sostenibile.
BIO: Sostenitrice del software libero e dei formati standard e aperti. È stata un membro attivo dei progetti Fedora e openSUSE e ha co-fondato l'Associazione LibreItalia dove è stata coinvolta in diversi eventi, migrazioni e formazione relativi a LibreOffice. In precedenza ha lavorato a migrazioni e corsi di formazione su LibreOffice per diverse amministrazioni pubbliche e privati. Da gennaio 2020 lavora in SUSE come Software Release Engineer per Uyuni e SUSE Manager e quando non segue la sua passione per i computer e per Geeko coltiva la sua curiosità per l'astronomia (da cui deriva il suo nickname deneb_alpha).
Recently uploaded (20)
A tale of scale & speed: How the US Navy is enabling software delivery from l...
A tale of scale & speed: How the US Navy is enabling software delivery from l...
20 Comprehensive Checklist of Designing and Developing a Website
20 Comprehensive Checklist of Designing and Developing a Website
Generative AI Deep Dive: Advancing from Proof of Concept to Production
Generative AI Deep Dive: Advancing from Proof of Concept to Production
UiPath Test Automation using UiPath Test Suite series, part 5
UiPath Test Automation using UiPath Test Suite series, part 5
Enchancing adoption of Open Source Libraries. A case study on Albumentations.AI
Enchancing adoption of Open Source Libraries. A case study on Albumentations.AI
GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024
How to Get CNIC Information System with Paksim Ga.pptx
How to Get CNIC Information System with Paksim Ga.pptx
Pushing the limits of ePRTC: 100ns holdover for 100 days
Pushing the limits of ePRTC: 100ns holdover for 100 days
UiPath Test Automation using UiPath Test Suite series, part 6
UiPath Test Automation using UiPath Test Suite series, part 6
Alt. GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using ...
Alt. GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using ...
20240605 QFM017 Machine Intelligence Reading List May 2024
20240605 QFM017 Machine Intelligence Reading List May 2024
Climate Impact of Software Testing at Nordic Testing Days
Climate Impact of Software Testing at Nordic Testing Days
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
Essentials of Automations: The Art of Triggers and Actions in FME
Essentials of Automations: The Art of Triggers and Actions in FME
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
Groschopp 50104 specsheet
- 1. Prepared by: Groschopp.com 02/24/14 Motor: Voltage: Speed: Gearbox: PM 6013 12 v DC 2750 rpm 2 Poles PS 1900 5:1 Ratio Product ID: 50104 SPECIFICATIONS Rating: Speed: Torque: Current: Output: Output: 549.9 rpm 5.2lb-in 5.5 amps 34 watts 0.0456 HP Duty Cycle: On: Off: Continuous Efficiency: Gearbox: Motor: System: 81.5 % 61.1 % 49.8 % Start/Stall Conditions: Current: Torque: 21.88 amps 28.22 lb-in Constants: Ke: 3.63 v/krpm Kt: 0.31 lb-in/amp Torque (lb-in) Speed RPM Efficiency 70.0 0.0 0.0 3.0 140.0 6.0 210.0 9.0 280.0 12.0 350.0 15.0 420.0 18.0 490.0 21.0 560.0 24.0 630.0 27.0 90.0 80.0 70.0 60.0 50.0 40.0 30.0 20.0 10.0 Speed, Efficiency Vs. Torque Cold Hot Notes: Sold & Serviced By: ELECTROMATE Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com