This document provides information about the GOBAC Technology and its solid waste management program. It lists the objectives of the program as sustaining cleanliness and ecological balance in local areas, generating income and employment through waste processing and recycling, and minimizing pollution. The technology uses good bacteria to compost biodegradable waste to reduce landfill volume and produce organic fertilizer. It describes the technical feasibility of implementing a recycling plant to turn waste into resources and produce products like bio-organic fertilizer while solving pollution problems. The plant would segregate and process waste through composting, recycling, and landfilling up to 20 tons per day.

1. TECHNOLOGY OFFICE: Our Lady of Ransom Subdivision Matatalaib, Tarlac City MOBILE NO. 09196436945
SATELLITE OFFICE: Mejia Street Bamban, Tarlac MOBILE NO. 09185895407
SATELLITE OFFICE: 399 Sn. Juan St. Sto. Domingo, Angeles City MOBILE NO. 09228490909
Email: jclk4_gobac@yahoo.com SEC Reg. #: CN200700710 Website: www.gobac.isgreat.org
PROGRAM: SOLID WASTE MANAGEMENT/GOBAC TECHNOLOGY
INTRODUCTION
Municipal Solid Waste has become a major problem in almost all area of the country. Very few
municipalities have an area for proper disposal of their municipal solid waste
The present system of collecting mixed-up garbage, transporting to far away dump sites and disposing
them by open dumping has brought about a variety of health, ecological economic and aesthetic problem.
A new technology which is called GOBAC Technology of composting with the aid of GOOD BACTERIA
can reduce the volume of garbage to be put up in a landfill and the materials dump in the area will not produce
leachate as the compostable material is segregated and use for composting.
The interest of the organization GLOBAL ORGANICS & BIO-AGRICULTURAL CONCEPTS (GOBAC) INC. is
to enlighten local executives that a solution to our Municipal Solid Waste (MSW) problem or to free them unclean,
unsightly foul smelling streets and neighborhood lies in processing and recycling which are viable resources or
organic fertilizers and recyclable/reusable products.
OBJECTIVES
 A sustained/sustainable cleanliness or orderliness and enhanced ecological balance in the locality.
 Generation of income and employment for the processing and recycling of community, market and animal
solid waste.
 Minimize or zero pollution of the air, water and soil.
 Improved soil physical, chemical and biological properties through the use of the organic fertilizer out of
the compost able Municipal Solid Waste.
TECHNICAL FEASIBILITY
With the implementation of this Resource Recovery Center project (Recycling Plant). Anything that we
consider worthless like community, market, industries, and animal waste will become a resource rather than a
refuse abandoned and destroyed.
Income and employment can be generated out of these waste/resources. Soil water and air pollution
created by waste will be solved and the area will be turned into more ecologically balanced environment.
The recycling plant can also cater to the adjoining municipalities for a fee for bringing in their garbage.
The major product that will be produced out of this garbage is bio-organic fertilizer, a friable soil like in
texture brownish black in color having 35% moisture content.
It contains organic matter, minor and major elements (nutrients) such as:

2. TECHNOLOGY OFFICE: Our Lady of Ransom Subdivision Matatalaib, Tarlac City MOBILE NO. 09196436945
SATELLITE OFFICE: Mejia Street Bamban, Tarlac MOBILE NO. 09185895407
SATELLITE OFFICE: 399 Sn. Juan St. Sto. Domingo, Angeles City MOBILE NO. 09228490909
Email: jclk4_gobac@yahoo.com SEC Reg. #: CN200700710 Website: www.gobac.isgreat.org
Nitrogen (N), Phosphorous (P)
Potassium (K) Calcium Oxide (CaO)
Magnesium Oxide (NgO) Zinc (Zu)
Copper (Cu) Manganese (Mn)
Iron (Fe) etc.
Which are beneficial for enhancing micro-organism which improves soil physical, chemical and biological
properties? It contains N-P-K combined not less than 7% Carbon to Nitrogen ratio of not more than 12:1 and
total organic matter of not less than 20%. It shall be packed into 50kg. Bag with polyethylene plastic bags with
0.025 thicknesses. This product will be derived from compostable/biodegradable solid waste as plant and animal
residues.
Other minor products are recycle/reusable materials such as papers, plastics carton, iron, aluminum,
copper, broken glasses, (white) bottles, tin, Styrofoam, cans etc. which can be sent back to the factory for
recycling and refusing purpose. These shall be packed and according to kinds and shall be stored prior to factory
processing. Municipal Solid Waste (MSW) will be stored out in the plant in biodegradable and non-biodegradable
classification (wet & dry) and into compostable, disposable and recyclable classification.
Compostable materials like food leftovers, rotten fruits and vegetables peelings,
Carcasses, woods, twigs, fish/fowls cleaning soft shells, leaves, etc. will be chopped into small pieces by the
shredder machine then measured on a volume basis to determine the correct proportion of additives to be
incorporated also on a volume basis for rapid composting of the entire mixture. The volume of the chopped waste
materials and corresponding amount of additives will be placed in the composting tank for efficient aerobic
decomposition. This process mentioned above is called Pre-Compost Process.
After fourteen (14) days the mixed waste materials are considered matured compost and shall be
subjected into another processing stage known as Post-Compost Production Process. At this stage the compost
material shall be harvested from the composting tank and shall pass the sieving machine to separate the fine and
rough particles and some impurities which are considered as disposable and will be placed in the land fill. The
rough particles will be grinded first before mixing it with fine particles for curing the mixture into open air shaded
structure, after curing the said materials they are considered organic fertilizer upon the addition of some
enriching organic elements after mixing in the mixer these go to the automatic bagging, stockpiling and finally
marketing.
Recyclable/reusable materials like tins, cans, metals, bottles, broken glasses, plastics, Styrofoam’s,
rubber, dry paper, cardboard, cartons etc. shall be collected packed within a shaded structure exclusively for
them which is sometimes called on the Material Recovery Storage (MRS). Upon accumulation of a large volume
within the storage materials will be sold to buyers.
Disposable materials which are non compostable and non recyclables / non reusable will be brought into
a landfill area for disposal then backfilled.
This Recycling Plant Module can process up to 20 tons of garbage per day.