Fabrication of prototype of stirling engineRavi Shekhar
This was the hardware project presentation prepared by our team on Stirling Engine during second year at VIT University Vellore. This was prototype of an SFA Stirling Engine.
Fabrication of prototype of stirling engineRavi Shekhar
This was the hardware project presentation prepared by our team on Stirling Engine during second year at VIT University Vellore. This was prototype of an SFA Stirling Engine.
A Stirling engine is a heat engine that operates by cyclic compression and expansion of air or other gas (the working fluid) at different temperatures, such that there is a net conversion of heat energy to mechanical work. More specifically, a closed-cycle regenerative heat engine with a permanently gaseous working fluid.
The Stirling engine is noted for its high efficiency compared to steam engines, quiet operation, and the ease with which it can use almost any heat source.This engine is currently exciting interest as the core component of micro combined heat and power (CHP) units, in which it is more efficient and safer than a comparable steam engine.
A Case study of stirling engine that deals with some of its practical points instead of getting into complicated mathematics of its thermodynamic relations.
Solar powered stirling engine driven water pumpeSAT Journals
Abstract Depletion of non-renewable resources has been a major problem that we face in today’s world, thus taking this into consideration, in this paper we deal with the powering of water pump using solar energy, for this purpose we use the principle of stirling cycle to achieve the desired result. Parabolic mirror is used to concentrate the solar beams onto the area where enough energy is produced to drive the stirling engine which works on the basic principal of the conversion of the heat energy to mechanical work depending on the heat difference being provided. A country like India, where energy crisis is a frequently observed problem, our system could be of great use especially in the areas where water deficiency is high, where shortage of electricity is a known fact. Our system uses the only abundant renewable energy that is the sun light for drawing out water from underground water beds which can be used to generate electric power, this method can act as an important tool. Keywords: Stirling engine, temperature difference, load, solar energy, water pump.
It is a external heat engine operating by cyclic compression and expansion of air or other gas, the working fluid, at different temperature levels such that there is a net conversion of heat energy to mechanical work.
A Stirling engine is a heat engine that operates by cyclic compression and expansion of air or other gas (the working fluid) at different temperatures, such that there is a net conversion of heat energy to mechanical work. More specifically, a closed-cycle regenerative heat engine with a permanently gaseous working fluid.
The Stirling engine is noted for its high efficiency compared to steam engines, quiet operation, and the ease with which it can use almost any heat source.This engine is currently exciting interest as the core component of micro combined heat and power (CHP) units, in which it is more efficient and safer than a comparable steam engine.
A Case study of stirling engine that deals with some of its practical points instead of getting into complicated mathematics of its thermodynamic relations.
Solar powered stirling engine driven water pumpeSAT Journals
Abstract Depletion of non-renewable resources has been a major problem that we face in today’s world, thus taking this into consideration, in this paper we deal with the powering of water pump using solar energy, for this purpose we use the principle of stirling cycle to achieve the desired result. Parabolic mirror is used to concentrate the solar beams onto the area where enough energy is produced to drive the stirling engine which works on the basic principal of the conversion of the heat energy to mechanical work depending on the heat difference being provided. A country like India, where energy crisis is a frequently observed problem, our system could be of great use especially in the areas where water deficiency is high, where shortage of electricity is a known fact. Our system uses the only abundant renewable energy that is the sun light for drawing out water from underground water beds which can be used to generate electric power, this method can act as an important tool. Keywords: Stirling engine, temperature difference, load, solar energy, water pump.
It is a external heat engine operating by cyclic compression and expansion of air or other gas, the working fluid, at different temperature levels such that there is a net conversion of heat energy to mechanical work.
this lab report include details and demonstrations about internal combustion ( IC) engine. its types like CI and SI engines, different parts of engine, 2 stroke and 4 stroke engine. The ignition system of engine, cooling system of Engine and lubricating system of Engine in detail.
Ceiling Fans and Storage Water Heaters Manufacturing (Indo Appliances )Sachin Motwani
This is a presentation of Sachin Motwani's (creator of this PPT) analysis during his internship in Indo Appliances, an India based company that boasts about high quality 'Made In India' Electrical Products.
In this topic you will get ideas about second law of thermodynamic,heat engine and Internal Combustion engine.Its very beneficial for Mechanical Engineering students as well as Automobile Engineering students.
About
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Technical Specifications
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
Key Features
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface
• Compatible with MAFI CCR system
• Copatiable with IDM8000 CCR
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
Application
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Water scarcity is the lack of fresh water resources to meet the standard water demand. There are two type of water scarcity. One is physical. The other is economic water scarcity.
Hierarchical Digital Twin of a Naval Power SystemKerry Sado
A hierarchical digital twin of a Naval DC power system has been developed and experimentally verified. Similar to other state-of-the-art digital twins, this technology creates a digital replica of the physical system executed in real-time or faster, which can modify hardware controls. However, its advantage stems from distributing computational efforts by utilizing a hierarchical structure composed of lower-level digital twin blocks and a higher-level system digital twin. Each digital twin block is associated with a physical subsystem of the hardware and communicates with a singular system digital twin, which creates a system-level response. By extracting information from each level of the hierarchy, power system controls of the hardware were reconfigured autonomously. This hierarchical digital twin development offers several advantages over other digital twins, particularly in the field of naval power systems. The hierarchical structure allows for greater computational efficiency and scalability while the ability to autonomously reconfigure hardware controls offers increased flexibility and responsiveness. The hierarchical decomposition and models utilized were well aligned with the physical twin, as indicated by the maximum deviations between the developed digital twin hierarchy and the hardware.
Student information management system project report ii.pdfKamal Acharya
Our project explains about the student management. This project mainly explains the various actions related to student details. This project shows some ease in adding, editing and deleting the student details. It also provides a less time consuming process for viewing, adding, editing and deleting the marks of the students.
Cosmetic shop management system project report.pdfKamal Acharya
Buying new cosmetic products is difficult. It can even be scary for those who have sensitive skin and are prone to skin trouble. The information needed to alleviate this problem is on the back of each product, but it's thought to interpret those ingredient lists unless you have a background in chemistry.
Instead of buying and hoping for the best, we can use data science to help us predict which products may be good fits for us. It includes various function programs to do the above mentioned tasks.
Data file handling has been effectively used in the program.
The automated cosmetic shop management system should deal with the automation of general workflow and administration process of the shop. The main processes of the system focus on customer's request where the system is able to search the most appropriate products and deliver it to the customers. It should help the employees to quickly identify the list of cosmetic product that have reached the minimum quantity and also keep a track of expired date for each cosmetic product. It should help the employees to find the rack number in which the product is placed.It is also Faster and more efficient way.
Sachpazis:Terzaghi Bearing Capacity Estimation in simple terms with Calculati...Dr.Costas Sachpazis
Terzaghi's soil bearing capacity theory, developed by Karl Terzaghi, is a fundamental principle in geotechnical engineering used to determine the bearing capacity of shallow foundations. This theory provides a method to calculate the ultimate bearing capacity of soil, which is the maximum load per unit area that the soil can support without undergoing shear failure. The Calculation HTML Code included.
2. o Created by:
MEMAN M.RAFIK J.
Enrolment No: 120440119032
o Guided by:
BJP Sir.
3. The Stirling engine was invented and patented
by Robert Stirling in 1816.
The stirling engine is a reciprocating external
combustion engine because fuel burns outside
the engine itself and continuously.
The stirling engine is designed so that the
working gas is generally compressed in the
colder portion of the cylinder and expanded in
the hotter portion resulting in a net coversion
of heat into work.
4. 1. Two piston type or alpha stirling engine.
2. Piston displacer type or beta stirling engine.
3. Gamma Stirling engine.
Types of gases are used….
Air ,
hydrogen ,
helium ,
nitrogen or vapor.
9. Operate using any available heat source.
Simple design of an engine compare to other
reciprocating engine.
It can be operate at lower pressure and provides perfect
balancing.
Disadvantages:
It’s cooling system requires large amount of water.
Not self starting.
It has low power to weight ratio.
Difficult to vary the power output.