The GAZOTRACK 4, multigas detector. This new generation handheld device can detect four gases at the same time- offering an all in one solution. The GAZOTRACK 4 can be used for a wide range of detection situation.
The highly sensitive detector tubes are designed for evaluation of the potential presence of ultra toxic chemical substances in the air and are resistant to interfering substances
The Monicon IR80 CO2 gas detector uses NDIR technology to immediately detect dangerous concentrations of carbon dioxide. It can operate as a standalone device or connected to a controller depending on the application. The IR80 has a user-friendly design that allows for simple one-person calibration and customization of alarm settings.
Rotronic PF4 Fast Response Differential Pressure & Temperature Measurement Tr...Thorne & Derrick UK
The document describes an intelligent transmitter for measuring differential pressure and temperature. The transmitter offers high precision measurement, fast response time, configurable analog signals, integrated relay switch contact, large overload range, and can be expanded with additional sensors. It has high immunity to dust and humidity and provides long-term stability and accuracy for applications such as clean rooms.
Rotronic Data Sheet HygroFlex4 - The Universal Transmitter. Info lebih lanjut hubungi Siwali Swantika, Jakarta : 021-45850618 | Surabaya : 031-8421264. Distributor Rotronic di Indonesia
The document discusses the development of computer technology for controlling devices. It describes how programmable logic controllers (PLCs) and microcontrollers can be used with feedback and open-loop control systems along with input/output devices to control industrial applications, vehicles, medical equipment, security systems, and more. A wide range of sensors are also summarized such as temperature, light, motion, pressure, and others that can be used as inputs to computer-controlled systems.
The document describes several combustion and emissions analyzers, refrigerant and gas leak detectors, and refrigerant handling equipment from Bacharach. Key details include:
- The PCA® 3 is a commercial combustion analyzer that measures O2, CO, temperature, draft, and calculates efficiency. It has a large color display and includes a probe and software.
- The Fyrite® InSight® Plus is a full-color combustion analyzer that measures O2, CO, temperature, and calculates values. It has self-calibration and tuning software.
- The Informant® 2 is a refrigerant and gas leak detector kit that includes sensors and a carrying case. It can detect leaks of combustible gases
The highly sensitive detector tubes are designed for evaluation of the potential presence of ultra toxic chemical substances in the air and are resistant to interfering substances
The Monicon IR80 CO2 gas detector uses NDIR technology to immediately detect dangerous concentrations of carbon dioxide. It can operate as a standalone device or connected to a controller depending on the application. The IR80 has a user-friendly design that allows for simple one-person calibration and customization of alarm settings.
Rotronic PF4 Fast Response Differential Pressure & Temperature Measurement Tr...Thorne & Derrick UK
The document describes an intelligent transmitter for measuring differential pressure and temperature. The transmitter offers high precision measurement, fast response time, configurable analog signals, integrated relay switch contact, large overload range, and can be expanded with additional sensors. It has high immunity to dust and humidity and provides long-term stability and accuracy for applications such as clean rooms.
Rotronic Data Sheet HygroFlex4 - The Universal Transmitter. Info lebih lanjut hubungi Siwali Swantika, Jakarta : 021-45850618 | Surabaya : 031-8421264. Distributor Rotronic di Indonesia
The document discusses the development of computer technology for controlling devices. It describes how programmable logic controllers (PLCs) and microcontrollers can be used with feedback and open-loop control systems along with input/output devices to control industrial applications, vehicles, medical equipment, security systems, and more. A wide range of sensors are also summarized such as temperature, light, motion, pressure, and others that can be used as inputs to computer-controlled systems.
The document describes several combustion and emissions analyzers, refrigerant and gas leak detectors, and refrigerant handling equipment from Bacharach. Key details include:
- The PCA® 3 is a commercial combustion analyzer that measures O2, CO, temperature, draft, and calculates efficiency. It has a large color display and includes a probe and software.
- The Fyrite® InSight® Plus is a full-color combustion analyzer that measures O2, CO, temperature, and calculates values. It has self-calibration and tuning software.
- The Informant® 2 is a refrigerant and gas leak detector kit that includes sensors and a carrying case. It can detect leaks of combustible gases
The Fyrite InTech is a combustion analyzer designed to measure stack temperature, oxygen levels, and calculate efficiency in residential furnaces. It features an easy-to-read LCD display, internal data storage, and field-replaceable sensors to minimize downtime. The compact, portable device provides accurate efficiency readings and diagnostics with intuitive push-button operation for reduced service times.
Opticon Việt Nam là văn phòng đại diện của Opticon Hà Lan. Chuyên cung cấp, phân phối các loại máy quét mã vạch chất lượng cao mang thương hiệu Nhật Bản. Sản phẩm máy quét của Opticon rất đa dạng từ máy quét cầm tay, máy quét để bàn, máy quét dùng trong công nghiệp, máy quét di động... có thể quét tốt các loại mã vạch 1D và 2D
The PolluCom E is a compact heating/cooling meter that measures energy consumption with high precision. It has a temperature range of 5-90°C, fast updating of values every 2-4 seconds, and password protected settings. Optional modules allow for remote reading via M-Bus or Mini-Bus communication and data logging in selectable time intervals. The meter comes in sizes for flow rates of 0.6, 1.5, or 2.5 m3/h and can be used for district heating, cooling billing, or individual apartment consumption.
The IRmax is a fixed point gas detector that offers reliable detection of hydrocarbon gases through infrared technology. It has a simple and low-maintenance design that requires minimal power. The IRmax provides industry standard 4-20mA output and options for HART communications or RS-485 Modbus connectivity. It can be easily installed and calibrated, and has a low cost of ownership due to its efficient design.
The document summarizes a compact heating/cooling meter called the PolluCom E. It measures energy consumption in heating or cooling circuits with high precision. It has a temperature range of 5-90°C, fast updating of values every 2-4 seconds, and optional modules for remote reading including M-Bus, Mini-Bus and a data logger. It provides accurate billing of energy usage in applications like district heating stations or individual apartment consumption.
The document summarizes gas detection equipment from Crowcon including the Flamgard Plus, TXgard Plus, and TXgard-IS+ models. These detectors reliably detect flammable, toxic, or oxygen gases with local displays and optional relays. They offer low cost of ownership through features like non-intrusive calibration and long life sensors. The detectors are available in different enclosure materials and hazard certifications to suit a wide range of application requirements.
The ECOTECH VOC1000 is designed to measure methane, non-methane and total hydrocarbon gases providing accurate and reliable measurement data. The VOC1000 analyser provides unparalleled flexibility and offers continuous, fully automated gas analysis over a broad range of concentrations.
Thesis defence about “Analysis of the changing patent infringement risk situation in a digital transformation scenario” by Leonhard Brader at the MIPLM 2020
Tetra is a single button, robust multigas monitor designed to reliably detect gases in tough environments. It features intelligent sensor modules, shockproof construction, and self-checking software. Tetra provides continuous 12 hour operation on a rechargeable battery and detects oxygen, toxic, and flammable gases with audible, visual, and vibrating alarms. It is simple to use, interchangeable sensor modules, and compatible with PC software for calibration and data logging.
Itron cf echo ii ultrasonic heat meter brochure - englishThorne & Derrick UK
The CF ECHO II is Itron's compact ultrasonic heat and cooling meter that measures flows from 0.6 to 15 m3/h with high accuracy. It features an advanced multifunctional display, communication capabilities, and optional modules for water metering and power supply. The meter complies with European standards and provides functions for data logging, billing, and network management.
The OLCT 80 Wireless is a field detector and transmitter suitable for use in explosive areas that allows for the wireless transmission of gas detection signal data over distances up to 3km. It reduces installation costs by eliminating cabling and wiring through its wireless connectivity. The device utilizes 2.4GHz frequency signal processing to transmit data from various sensor inputs or outputs in a reliable and interference-free manner, making it well-suited for a wide range of industrial applications.
MHC-3000 Handheld ultrasonic flow meter data sheetKevin Yang
The flow meter is a compact, handheld device that uses clamp-on transducers to measure fluid velocity in pipes without contacting the fluid. It can measure flow rates between 0.03-7m/s in pipes from 15mm to 6000mm diameter. The meter offers optional features like data logging, heat measurement, and display of flow, velocity, and temperature. It is suitable for applications like pump testing, leak detection, and energy monitoring in various industrial processes.
The document describes the Crowcon F-Gas detector, a fixed point gas detector that uses infrared (IR) sensor technology to detect refrigerant gases and sulfur hexafluoride (SF6). It provides dependable detection with a long-life IR sensor, high reliability, and low maintenance costs. The F-Gas detector delivers accurate and stable performance over many years with minimal calibration requirements. It helps users comply with F-Gas regulations while reducing leakage and improving efficiency.
The VICONOX tunnel atmosphere monitor is a single sensor solution for measuring NO2, NO, (NOx), CO, visibility and temperature (or combinations of) within a road traffic tunnel, rail tunnel or other confined space.
The PolluStat E is an ultrasonic energy meter suitable for measuring heating and refrigeration applications using water. It has a turndown ratio of 1:200, robust metal construction, and can measure flow rates from 0.6 to 60 m3/h. It has options for M-Bus or LONWORKS communication modules and a mini-bus port for automatic meter reading. The electronic display can be installed up to 3m from the flow meter and supports temperature sensors and expandable connections.
This document summarizes the features and capabilities of the HygroGen2, a portable humidity and temperature calibrator. Key features include the ability to generate stable humidity and temperature conditions for calibrating up to 6 probes simultaneously, integrated software for automated calibration and data collection, and an optional AutoCal feature for automated multi-point calibration of probes. The HygroGen2 provides precise control of humidity from 5-95% RH and temperature from 0-60°C.
The IMR 7500 is a stationary, extractive continuous emission monitoring system that can simultaneously measure up to 6 gases including O2, CO, NO, NO2, SO2, and H2S using electrochemical sensors. It uses a gas conditioning system to remove particles and prevent condensation, and outputs data through an interface to allow for online monitoring, furnace optimization, and other industrial applications. The system is modular and can be customized with additional sensors, such as NDIR sensors for CO2, CH4 or TDLS sensors for other gases like NH3 or HCl. It provides accurate, reliable measurements and high annual availability of over 99%.
Kamstrup RHI Compliant Heat Meters & Thermal Energy Measurement - Multical 40...Thorne & Derrick UK
The document provides information about the MULTICAL® 402 ultrasonic heat and cooling meter. It can measure energy consumption with temperatures from 2-160°C and has a measurement accuracy of ±(0.15 + 2/ΔΘ)%. The meter consists of a calculator, flow sensor and two temperature sensors. It has a battery lifetime of up to 16 years and can be remotely read via wireless M-Bus or radio.
Building Management System Sensors BrochureAlex Leung
The document discusses sensors and devices for building management systems, including those for climate control, indoor environmental quality monitoring, HVAC systems, pressure and level sensing, lighting control, energy monitoring and control, telemetry, and data logging. It provides examples of sensor and device recommendations for various building management applications such as HVAC air handling units, chiller plant monitoring, indoor air quality monitoring, and energy monitoring. The company IoTsense.net provides these sensors, telemetry equipment, data loggers, servers, and industrial computers which are suitable for building automation and management systems.
Xmatrx ELITE is BioGenx's All-in-One and All-at-Once fully automated system that provides an adaptable workflow solution for efficiency, productivity and profitability. The system consists of platform technology that standardizes complete automation from microtome to microscope in three simple steps (load, click and view) for any slide-based assays such as immuno-histochemistry (IHC), in situ hybridization (ISH), fluorescence in situ hybridization (FISH), co-detection and multiplex applications (double and triple stains; IHC/ISH), in situ PCR, micro-RNA and special staining. Hence, Xmatrx ELITE maximizes testing capacity, minimizes hands-on time, reduces errors and produces consistent results.
For more information contact Customer support at customer.service@biogenex.com
The document discusses Crowcon's portable gas detection equipment, including single-gas and multi-gas monitors for personal and area protection. It describes several of Crowcon's gas detector models such as the Crowcon Clip personal single-gas monitor, Gasman personal single-gas monitor, Gas-Pro and Gas-Pro IR personal 5-gas detectors, T3 personal 4-gas monitor, Detective+ portable area monitor, and Triple Plus+ personal oxygen/toxic/flammable gas detector. It also mentions related equipment like the I-Test bump test and calibration solution and Checkbox IMH automatic calibration equipment.
The document discusses Crowcon's portable gas detection equipment, including single-gas and multi-gas monitors for personal and area protection. It describes several of Crowcon's gas detector models such as the Crowcon Clip personal single-gas monitor, Gasman personal single-gas monitor, Gas-Pro and Gas-Pro IR personal 5-gas detectors, T3 personal 4-gas monitor, Detective+ portable area monitor, and Triple Plus+ personal oxygen/toxic/flammable gas detector. It also mentions related equipment like the I-Test bump test and calibration solution and Checkbox IMH automatic calibration equipment.
The Fyrite InTech is a combustion analyzer designed to measure stack temperature, oxygen levels, and calculate efficiency in residential furnaces. It features an easy-to-read LCD display, internal data storage, and field-replaceable sensors to minimize downtime. The compact, portable device provides accurate efficiency readings and diagnostics with intuitive push-button operation for reduced service times.
Opticon Việt Nam là văn phòng đại diện của Opticon Hà Lan. Chuyên cung cấp, phân phối các loại máy quét mã vạch chất lượng cao mang thương hiệu Nhật Bản. Sản phẩm máy quét của Opticon rất đa dạng từ máy quét cầm tay, máy quét để bàn, máy quét dùng trong công nghiệp, máy quét di động... có thể quét tốt các loại mã vạch 1D và 2D
The PolluCom E is a compact heating/cooling meter that measures energy consumption with high precision. It has a temperature range of 5-90°C, fast updating of values every 2-4 seconds, and password protected settings. Optional modules allow for remote reading via M-Bus or Mini-Bus communication and data logging in selectable time intervals. The meter comes in sizes for flow rates of 0.6, 1.5, or 2.5 m3/h and can be used for district heating, cooling billing, or individual apartment consumption.
The IRmax is a fixed point gas detector that offers reliable detection of hydrocarbon gases through infrared technology. It has a simple and low-maintenance design that requires minimal power. The IRmax provides industry standard 4-20mA output and options for HART communications or RS-485 Modbus connectivity. It can be easily installed and calibrated, and has a low cost of ownership due to its efficient design.
The document summarizes a compact heating/cooling meter called the PolluCom E. It measures energy consumption in heating or cooling circuits with high precision. It has a temperature range of 5-90°C, fast updating of values every 2-4 seconds, and optional modules for remote reading including M-Bus, Mini-Bus and a data logger. It provides accurate billing of energy usage in applications like district heating stations or individual apartment consumption.
The document summarizes gas detection equipment from Crowcon including the Flamgard Plus, TXgard Plus, and TXgard-IS+ models. These detectors reliably detect flammable, toxic, or oxygen gases with local displays and optional relays. They offer low cost of ownership through features like non-intrusive calibration and long life sensors. The detectors are available in different enclosure materials and hazard certifications to suit a wide range of application requirements.
The ECOTECH VOC1000 is designed to measure methane, non-methane and total hydrocarbon gases providing accurate and reliable measurement data. The VOC1000 analyser provides unparalleled flexibility and offers continuous, fully automated gas analysis over a broad range of concentrations.
Thesis defence about “Analysis of the changing patent infringement risk situation in a digital transformation scenario” by Leonhard Brader at the MIPLM 2020
Tetra is a single button, robust multigas monitor designed to reliably detect gases in tough environments. It features intelligent sensor modules, shockproof construction, and self-checking software. Tetra provides continuous 12 hour operation on a rechargeable battery and detects oxygen, toxic, and flammable gases with audible, visual, and vibrating alarms. It is simple to use, interchangeable sensor modules, and compatible with PC software for calibration and data logging.
Itron cf echo ii ultrasonic heat meter brochure - englishThorne & Derrick UK
The CF ECHO II is Itron's compact ultrasonic heat and cooling meter that measures flows from 0.6 to 15 m3/h with high accuracy. It features an advanced multifunctional display, communication capabilities, and optional modules for water metering and power supply. The meter complies with European standards and provides functions for data logging, billing, and network management.
The OLCT 80 Wireless is a field detector and transmitter suitable for use in explosive areas that allows for the wireless transmission of gas detection signal data over distances up to 3km. It reduces installation costs by eliminating cabling and wiring through its wireless connectivity. The device utilizes 2.4GHz frequency signal processing to transmit data from various sensor inputs or outputs in a reliable and interference-free manner, making it well-suited for a wide range of industrial applications.
MHC-3000 Handheld ultrasonic flow meter data sheetKevin Yang
The flow meter is a compact, handheld device that uses clamp-on transducers to measure fluid velocity in pipes without contacting the fluid. It can measure flow rates between 0.03-7m/s in pipes from 15mm to 6000mm diameter. The meter offers optional features like data logging, heat measurement, and display of flow, velocity, and temperature. It is suitable for applications like pump testing, leak detection, and energy monitoring in various industrial processes.
The document describes the Crowcon F-Gas detector, a fixed point gas detector that uses infrared (IR) sensor technology to detect refrigerant gases and sulfur hexafluoride (SF6). It provides dependable detection with a long-life IR sensor, high reliability, and low maintenance costs. The F-Gas detector delivers accurate and stable performance over many years with minimal calibration requirements. It helps users comply with F-Gas regulations while reducing leakage and improving efficiency.
The VICONOX tunnel atmosphere monitor is a single sensor solution for measuring NO2, NO, (NOx), CO, visibility and temperature (or combinations of) within a road traffic tunnel, rail tunnel or other confined space.
The PolluStat E is an ultrasonic energy meter suitable for measuring heating and refrigeration applications using water. It has a turndown ratio of 1:200, robust metal construction, and can measure flow rates from 0.6 to 60 m3/h. It has options for M-Bus or LONWORKS communication modules and a mini-bus port for automatic meter reading. The electronic display can be installed up to 3m from the flow meter and supports temperature sensors and expandable connections.
This document summarizes the features and capabilities of the HygroGen2, a portable humidity and temperature calibrator. Key features include the ability to generate stable humidity and temperature conditions for calibrating up to 6 probes simultaneously, integrated software for automated calibration and data collection, and an optional AutoCal feature for automated multi-point calibration of probes. The HygroGen2 provides precise control of humidity from 5-95% RH and temperature from 0-60°C.
The IMR 7500 is a stationary, extractive continuous emission monitoring system that can simultaneously measure up to 6 gases including O2, CO, NO, NO2, SO2, and H2S using electrochemical sensors. It uses a gas conditioning system to remove particles and prevent condensation, and outputs data through an interface to allow for online monitoring, furnace optimization, and other industrial applications. The system is modular and can be customized with additional sensors, such as NDIR sensors for CO2, CH4 or TDLS sensors for other gases like NH3 or HCl. It provides accurate, reliable measurements and high annual availability of over 99%.
Kamstrup RHI Compliant Heat Meters & Thermal Energy Measurement - Multical 40...Thorne & Derrick UK
The document provides information about the MULTICAL® 402 ultrasonic heat and cooling meter. It can measure energy consumption with temperatures from 2-160°C and has a measurement accuracy of ±(0.15 + 2/ΔΘ)%. The meter consists of a calculator, flow sensor and two temperature sensors. It has a battery lifetime of up to 16 years and can be remotely read via wireless M-Bus or radio.
Building Management System Sensors BrochureAlex Leung
The document discusses sensors and devices for building management systems, including those for climate control, indoor environmental quality monitoring, HVAC systems, pressure and level sensing, lighting control, energy monitoring and control, telemetry, and data logging. It provides examples of sensor and device recommendations for various building management applications such as HVAC air handling units, chiller plant monitoring, indoor air quality monitoring, and energy monitoring. The company IoTsense.net provides these sensors, telemetry equipment, data loggers, servers, and industrial computers which are suitable for building automation and management systems.
Xmatrx ELITE is BioGenx's All-in-One and All-at-Once fully automated system that provides an adaptable workflow solution for efficiency, productivity and profitability. The system consists of platform technology that standardizes complete automation from microtome to microscope in three simple steps (load, click and view) for any slide-based assays such as immuno-histochemistry (IHC), in situ hybridization (ISH), fluorescence in situ hybridization (FISH), co-detection and multiplex applications (double and triple stains; IHC/ISH), in situ PCR, micro-RNA and special staining. Hence, Xmatrx ELITE maximizes testing capacity, minimizes hands-on time, reduces errors and produces consistent results.
For more information contact Customer support at customer.service@biogenex.com
The document discusses Crowcon's portable gas detection equipment, including single-gas and multi-gas monitors for personal and area protection. It describes several of Crowcon's gas detector models such as the Crowcon Clip personal single-gas monitor, Gasman personal single-gas monitor, Gas-Pro and Gas-Pro IR personal 5-gas detectors, T3 personal 4-gas monitor, Detective+ portable area monitor, and Triple Plus+ personal oxygen/toxic/flammable gas detector. It also mentions related equipment like the I-Test bump test and calibration solution and Checkbox IMH automatic calibration equipment.
The document discusses Crowcon's portable gas detection equipment, including single-gas and multi-gas monitors for personal and area protection. It describes several of Crowcon's gas detector models such as the Crowcon Clip personal single-gas monitor, Gasman personal single-gas monitor, Gas-Pro and Gas-Pro IR personal 5-gas detectors, T3 personal 4-gas monitor, Detective+ portable area monitor, and Triple Plus+ personal oxygen/toxic/flammable gas detector. It also mentions related equipment like the I-Test bump test and calibration solution and Checkbox IMH automatic calibration equipment.
This document provides information on Crowcon's portable gas detection equipment. It describes several personal and area gas monitors for detecting various gases like oxygen, hydrogen sulfide, carbon monoxide, and more. Features include alarms, data logging, easy operation, rugged designs suitable for harsh conditions, and options for single or multiple gas detection. Crowcon also offers calibration and bump test equipment as well as software for instrument management.
The Microtector III G888 is a small, lightweight 7-gas detector that can monitor up to 7 gases simultaneously using integrated sensors. It has wireless capability to transmit measurement data to a control center up to 1500m away. It uses electrochemical and infrared sensors to detect toxic, flammable, and oxygen levels. The device is rugged, water resistant, and easy to operate with intuitive buttons and display. It provides reliable detection of gases like methane, carbon dioxide, and others depending on the sensor configuration.
The 4 Channel Gas Monitor is a wall-mounted, microprocessor-controlled gas detection system that monitors up to 4 channels for toxic, combustible, and oxygen gases. It has individual alarm relays, 4-20mA outputs, RS485 communications, and is user-programmable for alarm settings and sensor configuration. It provides an effective yet cost-efficient gas monitoring solution.
The T3 portable gas detector and T3 Gas Tester provide a reliable and user-friendly solution for gas detection and bump testing. The T3 detector tests for multiple gases, has audible, visual, and vibrating alarms, and a battery that lasts over 14 hours. The compact T3 Gas Tester allows for quick bump testing of the T3 detector's sensors in under 60 seconds using a fixed flow regulator, helping to ensure compliance and safety.
Crowcon is a manufacturer of gas detection equipment that has been developing reliable products for over 40 years. Their fixed gas detectors have been used in various industrial environments and applications where reliability is important, such as oil and gas exploration. Crowcon offers a range of fixed gas detection solutions including infrared detectors, control panels to monitor multiple detectors, and sampling systems to remotely monitor gases.
Photonics for High-End Gas Analysis - Gasera Ltd.Gasera Ltd.
Dr. Ismo Kauppinen discusses photonics for high-end gas analysis. Key drivers for growing gas analysis needs are air pollution, global warming, and safety/security as harmful and greenhouse gases require high-sensitivity detection due to low concentrations. GASERA provides patented photoacoustic spectroscopy technology using a novel cantilever sensor that is 100x more sensitive than conventional microphones. GASERA's multi-gas analyzers and research systems have applications in life/health/environmental monitoring and security.
GCEM 40 series extractive gas analyser codel datasheetENVIMART
The document describes the GCEM 40 Series Extractive Gas Analyzer, a multi-channel gas analyzer from CODEL for continuous emissions monitoring. It can measure multiple gas species simultaneously, including CO, NO, NO2, NOx, SO2, CH4, HCl, N2O, CO2, H2O, and O2. It features automatic zero and span calibration, heated probe and sample line, and outputs data in real-time to meet regulatory requirements. The gas analyzer works with CODEL's SmartCEM software for graphing and reporting emissions data over time.
The Triple Plus+ and Triple Plus+ IR are portable gas detection instruments manufactured by Crowcon that can detect multiple industrial gases. They offer reliable detection of toxic, oxygen, and flammable gases through interchangeable electrochemical and infrared sensor modules. The instruments are designed to be durable, easy to use, and customizable to user needs.
compact portable gas detector with a large LCD. It can monitor CO, H2S, O2 and combustible gas simultaneously. The instrument features two instant alarms with audio/visual and vibratory indicators, rechargeable battery, and simple use.
A Universal Transmitter for Toxic, Oxygen and Combustible Gas DetectionArjay Automation
XNX is designed for flexible integration, simple installation, user-friendly operation and straight-forward maintenance. It is ideal for use with a range of gas monitoring controllers or industry standard PLCs. The introduction of our HART Enhanced Device Descriptor Language (EDDL) software provides users with an at-a-glance indication of the health of their gas detectors in the field.
The T3 and T3 Gas Tester are portable gas detection equipment from Crowcon that provide reliable and user-friendly personal monitoring against industrial gas hazards. The T3 is small, lightweight, and offers over 14 hours of operation from a single charge, while detecting a range of gases. It has effective alarms and a clear display. The T3 Gas Tester allows for quick bump testing of T3 instruments to ensure they are working properly.
Hệ thống quan trắc khí thải tự động - Tư vấn: 0938-564-123Lâm Nguyễn Hoàng
Hệ thống quan trắc khí thải tự động cho chủ nguồn thải khí thải công nghiệp - Tư vấn đầu tư lắp đặt: lam.nguyen@vietan-enviro.com - 0938-564-123 (Mr Lâm)
The Detect-F is a handheld leak detector that can detect both CO2 and refrigerant gases using a single instrument. It has a simple two-button operation, offers adjustable sensitivity, and features a flexible probe for accessing hard to reach places. The detector uses patented technology with semiconductor and electrochemical sensors to quickly pinpoint gas leaks through a progressive audible alarm and LED display.
Rotronic measuring instruments and monitoring solutions, for temperature measurement and monitoring of relative humidity – includes industrial probes, humidity sensors, measurement probes and data loggers, handheld instruments, transmitters . Info lebih lanjut hubungi Siwali Swantika, Jakarta : 021-45850618 | Surabaya : 031-8421264. Distributor Rotronic di Indonesia
The document discusses a1-cbiss, a company that provides refrigerant leak detection solutions and gas monitoring systems. They offer a turnkey solution that includes project management, consultancy, design, installation, commissioning, and long-term service and support. They provide both fixed refrigerant leak detection systems like the ARMS 2 and RMS8000, as well as handheld detectors like the new Detect-F dual gas detector. Their solutions help customers comply with regulations, reduce costs, and protect personnel and the environment by identifying refrigerant leaks. They work with customers across various industries and have an international network of distributors.
The Fox Model FT4X, is the newest Thermal Gas Mass Flow Meter offered from Fox Thermal Instruments.
The Model FT4X measures gas flow rate in standard units (MSCFD, SCFM, NM³/hr, LBS/HR, KG/HR & many more) without the need for temperature and pressure compensation.
Our COMETS is the perfect compact ambient air monitoring station. Fully air-conditioned, automated and according to EU guidelines.
This monitoring station can be placed anywhere in critical places such as busy intersections, street canyons, temporary background stations and much more.
The compact station comes with a complete solution such as NO, NO2, NOx, CO, PM10 - PM2.5, Black Carbon and BTEX analyzer, logger and platform.
It is constructed in such a way that minimal maintenance is required. The station can work autonomously and data can be viewed, analyzed and validated remotely using our state-of-the-art logger and "air quality data platform".
We fotograferen, scannen woningen, gebouwen, constructies voor vastgoedmakelaars, architecten, projectontwikkelaars, aannemers,...
Daarnaast maken we 360° scans, virtual tours, grondplannen, luchtfoto's met
drones, mapping en nog veel meer.
Diensten voor vastgoed
Standaard fotografie
3d scans
Virtual tours
2d vloerplannen
Drone foto -en videografie
Virtual staging
Nabewerken foto's
Vastgoed teaser videos
Diensten voor
constructies
Foto en video
3d scans
E57 files
Vloerplannen
Puntenwolken
Mesh bestanden
Trueplan
Luchtfoto's
en meer
XRF Based &Multi-Metals & Continuous Water Analyzer Xact920European Tech Serv
Process monitoring – feedback for water treatment may improve the efficiency of the treatment process – use fewer chemicals to achieve require effluent emission limits
Measurement of Se, As for compliance with Steam Electric Generating Effluent Guidelines
Monitoring of treatment of wastewater by biological based treatment systems
Measurement of Corrosion Products (e.g. Fe, Ni, Cr and Mn) to improve operating efficiency
Measurement of Elements in Nuclear Power Plant Applications (e.g. Pb, Cu, Fe)
Reduce laboratory analysis costs
On-line, in-situ, and at-line monitoring of batch and continuous processes
Displays up to 15 properties at once and measures up to 30 properties per stream
Optical multiplexing capabilities provide analysis of up to 16 process streams using fiber optic or extractive stream switching
Utilizes process-proven ANALECT® Diamond 20™ Transept™ optical head
SpectraRTS™ software engineered exclusively for on-line monitoring, allowing use by engineers, maintenance personnel, and chemists
All ANALECT® lab and on-line systems share core optical technology, allowing instrument-to-instrument calibration transfers
The FROG-5000™ is a portable gas chromatograph (GC) that identifies multiple target volatile organic compounds (VOC) in water, soil, and air. The FROG-5000™ detects chemicals as volatile as vinyl chloride to semi-volatile organics such as naphthalene with lab quality results.
Featuring a MEMS (micro electro-mechanical systems), the FROG-5000™ has an integrated heater for temperature ramp chromatography – ramping the temperature reduces the analysis time and aids in the separation of late eluting compounds. These components combined with an internal PID identify VOCs in ambient air at concentrations as low as 1 part per billion.
Continuous analysis:
Continuous analysis of aerosols on filters for optical and thermal analysis
OC/EC determination:
Real time/online TC/BC/EC/OC and Brc analysis in combination with our Aethalometer AE33
Ease of Use:
No fragile glassware, no catalyst, no gas supplies needed
Rugged, Reliable, automatic:
35 years of published performance, rugged, all-steel construction, unattended operation – 1 month minimum
At the core of our technology are our next‑generation air quality monitors - the Clarity Node and Node-S. These nimble monitors are configured on our web-based deployment tool and installed in a matter of minutes. Hundreds to thousands of devices work together to form a scalable network of high density air quality measurement points.
At the core of our technology are our next‑generation air quality monitors - the Clarity Node and Node-S. These nimble monitors are configured on our web-based deployment tool and installed in a matter of minutes. Hundreds to thousands of devices work together to form a scalable network of high density air quality measurement points.
At the core of our technology are our next‑generation air quality monitors - the Clarity Node and Node-S. These nimble monitors are configured on our web-based deployment tool and installed in a matter of minutes. Hundreds to thousands of devices work together to form a scalable network of high density air quality measurement points.
At the core of our technology are our next‑generation air quality monitors - the Clarity Node and Node-S. These nimble monitors are configured on our web-based deployment tool and installed in a matter of minutes. Hundreds to thousands of devices work together to form a scalable network of high density air quality measurement points.
The Mi3 is a turnkey solution for automotive emission testing that features the world's fastest particle sensor. It provides accurate real-time data, reliable measurements in all environments, and ensures measurements meet emission regulations standards. The Mi3 requires little maintenance due to its low-maintenance particle sensor and self-diagnostics. It can integrate seamlessly with existing emission test infrastructure through various connection options.
THE GAS CHROMATOGRAPHIC REVOLUTION
FOR ENVIRONMENTAL MONITORING
PyxisGC BTEX is the first and unique gaschromatograph "carrier gas free" for remote BTEX monitoring
in ambient air. PyxisGC BTEX is manufactured by Pollution Analytical Equipment in compliance with
EN14662-3:2015.
"BTEX ambient air analysis: sources, regulations, technologies for controls"European Tech Serv
"BTEX ambient air analysis: sources, regulations, technologies for
controls"
In collaboration with The Council for Research and Experimentation in Agriculture at the Puglia
Regional Environmental Protection Agency (ARPA)
The M1000 operates according to the diffusion principle. The monitor is mounted on a flange which is located at the top of the silo or bin. The gas in the atmosphere of the silo diffuses into the oxygen sensor. Since there is no positive movement of chemical powder to the sensor the sampling gas will not block filters and tubing. The right design and choice of components ensures a long term maintenance free operation.
H2scan’s HY-ALERTA™ 600 Fixed Area Hydrogen Monitor will provide hydrogen-specific leak detection and measurement for hydrogen concentrations as low as 4000 ppm and can be scaled to any concentration up to 5% hydrogen by volume, a range representing 10% to 125% of hydrogen’s low flammability limit
H2scan’s HY-ALERTA™ 600 Fixed Area Hydrogen Monitor will provide hydrogen-specific leak detection and measurement for hydrogen concentrations as low as 4000 ppm and can be scaled to any concentration up to 5% hydrogen by volume, a range representing 10% to 125% of hydrogen’s low flammability limit
H2scan’s HY-ALERTA™ 1600 Intrinsically Safe Area Hydrogen Monitor provides hydrogen-specific leak detection and measurement for hydrogen concentrations as low as 4000 ppm and can be scaled to any concentration up to 5% hydrogen by volume, a range representing 10% to 125% of hydrogen’s low flammability limit.
H2scan’s HY-ALERTA™ 1600 Intrinsically Safe Area Hydrogen Monitor provides hydrogen-specific leak detection and measurement for hydrogen concentrations as low as 4000 ppm and can be scaled to any concentration up to 5% hydrogen by volume, a range representing 10% to 125% of hydrogen’s low flammability limit.
H2scan’s HY-ALERTA™ 2600 Explosion Proof Area Hydrogen Monitor provides hydrogen-specific leak detection and measurement for hydrogen concentrations as low as 4000 ppm and can be scaled to any concentration up to 5% hydrogen by volume, a range representing 10% to 125% of hydrogen’s lower flammability limit.
Technology background HY-ALERTA SAFETY SYSTEMS – HY-ALERTA 2600European Tech Serv
H2scan’s HY-ALERTA™ 2600 Explosion Proof Area Hydrogen Monitor provides hydrogen-specific leak detection and measurement for hydrogen concentrations as low as 4000 ppm and can be scaled to any concentration up to 5% hydrogen by volume, a range representing 10% to 125% of hydrogen’s lower flammability limit.
Improving the viability of probiotics by encapsulation methods for developmen...Open Access Research Paper
The popularity of functional foods among scientists and common people has been increasing day by day. Awareness and modernization make the consumer think better regarding food and nutrition. Now a day’s individual knows very well about the relation between food consumption and disease prevalence. Humans have a diversity of microbes in the gut that together form the gut microflora. Probiotics are the health-promoting live microbial cells improve host health through gut and brain connection and fighting against harmful bacteria. Bifidobacterium and Lactobacillus are the two bacterial genera which are considered to be probiotic. These good bacteria are facing challenges of viability. There are so many factors such as sensitivity to heat, pH, acidity, osmotic effect, mechanical shear, chemical components, freezing and storage time as well which affects the viability of probiotics in the dairy food matrix as well as in the gut. Multiple efforts have been done in the past and ongoing in present for these beneficial microbial population stability until their destination in the gut. One of a useful technique known as microencapsulation makes the probiotic effective in the diversified conditions and maintain these microbe’s community to the optimum level for achieving targeted benefits. Dairy products are found to be an ideal vehicle for probiotic incorporation. It has been seen that the encapsulated microbial cells show higher viability than the free cells in different processing and storage conditions as well as against bile salts in the gut. They make the food functional when incorporated, without affecting the product sensory characteristics.
Evolving Lifecycles with High Resolution Site Characterization (HRSC) and 3-D...Joshua Orris
The incorporation of a 3DCSM and completion of HRSC provided a tool for enhanced, data-driven, decisions to support a change in remediation closure strategies. Currently, an approved pilot study has been obtained to shut-down the remediation systems (ISCO, P&T) and conduct a hydraulic study under non-pumping conditions. A separate micro-biological bench scale treatability study was competed that yielded positive results for an emerging innovative technology. As a result, a field pilot study has commenced with results expected in nine-twelve months. With the results of the hydraulic study, field pilot studies and an updated risk assessment leading site monitoring optimization cost lifecycle savings upwards of $15MM towards an alternatively evolved best available technology remediation closure strategy.
Optimizing Post Remediation Groundwater Performance with Enhanced Microbiolog...Joshua Orris
Results of geophysics and pneumatic injection pilot tests during 2003 – 2007 yielded significant positive results for injection delivery design and contaminant mass treatment, resulting in permanent shut-down of an existing groundwater Pump & Treat system.
Accessible source areas were subsequently removed (2011) by soil excavation and treated with the placement of Emulsified Vegetable Oil EVO and zero-valent iron ZVI to accelerate treatment of impacted groundwater in overburden and weathered fractured bedrock. Post pilot test and post remediation groundwater monitoring has included analyses of CVOCs, organic fatty acids, dissolved gases and QuantArray® -Chlor to quantify key microorganisms (e.g., Dehalococcoides, Dehalobacter, etc.) and functional genes (e.g., vinyl chloride reductase, methane monooxygenase, etc.) to assess potential for reductive dechlorination and aerobic cometabolism of CVOCs.
In 2022, the first commercial application of MetaArray™ was performed at the site. MetaArray™ utilizes statistical analysis, such as principal component analysis and multivariate analysis to provide evidence that reductive dechlorination is active or even that it is slowing. This creates actionable data allowing users to save money by making important site management decisions earlier.
The results of the MetaArray™ analysis’ support vector machine (SVM) identified groundwater monitoring wells with a 80% confidence that were characterized as either Limited for Reductive Decholorination or had a High Reductive Reduction Dechlorination potential. The results of MetaArray™ will be used to further optimize the site’s post remediation monitoring program for monitored natural attenuation.
RoHS stands for Restriction of Hazardous Substances, which is also known as t...vijaykumar292010
RoHS stands for Restriction of Hazardous Substances, which is also known as the Directive 2002/95/EC. It includes the restrictions for the use of certain hazardous substances in electrical and electronic equipment. RoHS is a WEEE (Waste of Electrical and Electronic Equipment).
Microbial characterisation and identification, and potability of River Kuywa ...Open Access Research Paper
Water contamination is one of the major causes of water borne diseases worldwide. In Kenya, approximately 43% of people lack access to potable water due to human contamination. River Kuywa water is currently experiencing contamination due to human activities. Its water is widely used for domestic, agricultural, industrial and recreational purposes. This study aimed at characterizing bacteria and fungi in river Kuywa water. Water samples were randomly collected from four sites of the river: site A (Matisi), site B (Ngwelo), site C (Nzoia water pump) and site D (Chalicha), during the dry season (January-March 2018) and wet season (April-July 2018) and were transported to Maseno University Microbiology and plant pathology laboratory for analysis. The characterization and identification of bacteria and fungi were carried out using standard microbiological techniques. Nine bacterial genera and three fungi were identified from Kuywa river water. Clostridium spp., Staphylococcus spp., Enterobacter spp., Streptococcus spp., E. coli, Klebsiella spp., Shigella spp., Proteus spp. and Salmonella spp. Fungi were Fusarium oxysporum, Aspergillus flavus complex and Penicillium species. Wet season recorded highest bacterial and fungal counts (6.61-7.66 and 3.83-6.75cfu/ml) respectively. The results indicated that the river Kuywa water is polluted and therefore unsafe for human consumption before treatment. It is therefore recommended that the communities to ensure that they boil water especially for drinking.
Epcon is One of the World's leading Manufacturing Companies.EpconLP
Epcon is One of the World's leading Manufacturing Companies. With over 4000 installations worldwide, EPCON has been pioneering new techniques since 1977 that have become industry standards now. Founded in 1977, Epcon has grown from a one-man operation to a global leader in developing and manufacturing innovative air pollution control technology and industrial heating equipment.
Presented by The Global Peatlands Assessment: Mapping, Policy, and Action at GLF Peatlands 2024 - The Global Peatlands Assessment: Mapping, Policy, and Action
Kinetic studies on malachite green dye adsorption from aqueous solutions by A...Open Access Research Paper
Water polluted by dyestuffs compounds is a global threat to health and the environment; accordingly, we prepared a green novel sorbent chemical and Physical system from an algae, chitosan and chitosan nanoparticle and impregnated with algae with chitosan nanocomposite for the sorption of Malachite green dye from water. The algae with chitosan nanocomposite by a simple method and used as a recyclable and effective adsorbent for the removal of malachite green dye from aqueous solutions. Algae, chitosan, chitosan nanoparticle and algae with chitosan nanocomposite were characterized using different physicochemical methods. The functional groups and chemical compounds found in algae, chitosan, chitosan algae, chitosan nanoparticle, and chitosan nanoparticle with algae were identified using FTIR, SEM, and TGADTA/DTG techniques. The optimal adsorption conditions, different dosages, pH and Temperature the amount of algae with chitosan nanocomposite were determined. At optimized conditions and the batch equilibrium studies more than 99% of the dye was removed. The adsorption process data matched well kinetics showed that the reaction order for dye varied with pseudo-first order and pseudo-second order. Furthermore, the maximum adsorption capacity of the algae with chitosan nanocomposite toward malachite green dye reached as high as 15.5mg/g, respectively. Finally, multiple times reusing of algae with chitosan nanocomposite and removing dye from a real wastewater has made it a promising and attractive option for further practical applications.
Global Peatlands Map and Hotspot Explanation Atlas
GAZOTRACK 4, multigas detector.
1. Gas Concentration Measurement,
Work Zone Safety
Simultaneous detection of up to four gases – CH4 with infrared sensor,
CO, O2, THT/TBM/H2S with electrochemical sensors
Reliable measurements in spite of temperature variations,
no condensation formation
Personalised, intuitive and user-friendly interface
Event logging and transfer via Bluetooth®
connection
Multifunction Gas Leak Detector
2. *
The device is configured for specific usage needs by a GAZOMAT™-approved person using Windows™ software - **
Reporting of data by external software as an option
GAZOMAT™ has extended its range of optical (NDIR) gas detectors with its new GAZOTRACK™4 device, which is a multigas detector with
intelligent IR sensors for hydrocarbons and electrochemical sensors for toxic and odorant gases. This new-generation handheld device
is capable of detecting up to four gases at the same time.
It offers an all-in-one solution that is extremely flexible and easy to use, meeting the safety and performance requirements of a large
range of applications – emergency and safety interventions, bore holes, pipeline purging and filling, monitoring of networks in gas
storage and transport installations, measurement of odorant gases, testing for toxic gases in potentially hazardous work zones.
Measurement reliability
A smart sensor using non-dispersive infrared (NDIR) technology to guarantee
measurement efficiency:
• Repeatable and reliable measurements
• Sensor immune to toxic compounds
• Very quick response time, under 4 seconds
• Temperature regulation system integrated into the sensor for protection from high temperature and
humidity variations - no condensation
• Lifespan above five years
Menu browsing keys
Menu key to switch user modes
On/Off key
Maximum recorded measurement of CH4
Application/User mode
Display area of the measurement of
toxic gases: (CO, O2, THT/TBM/H2S)
Instant value measured by the device
Bluetooth®
activation indicator
Indicator area:
Battery/Audio alarms/Bluetooth®
/Pump
User friendly
• Immediate operation:
- Start-up time below 30 seconds
- No need for preliminary adjustment or setup
• Simplified interface with four control buttons
• Intuitive use with integrated applications*
• Automatic event logging and transfer via Bluetooth®
connection**
• Visual alarms with flashing red LEDs accompanied by an audio signal
• Charger base for use in the office or in a vehicle
• Up to 16-hour operating time
Convenience and safety in ATEX/IECEx/CSA/UL zones
• Safe use in zones at risk of explosion - certification pending for ATEX / IECEx zones 0, 1
and 2 and CSA / UL Class 1 DIV 1
• Rugged design for use in extreme conditions
• Large display of measurements in values and bars on back-lit LCD screen
• Compact and lightweight design
Failsafe Design
• Continuous self-testing
• Display of error messages with audio signal
• Device shutdown message in the event of a major fault
Simplified maintenance and reduced costs
• Quick replacement of sensors and filters, with no need for recalibration
(maintenance by GAZOMAT™-approved personnel only)
• Simple annual verification using the test kit
• Operating time before maintenance approximately 5,000 h.
• Two-year guarantee (electrochemical sensors not included)