The document discusses flexibility requirements for large-scale renewable energy integration in India's power system. It outlines challenges such as renewable energy curtailment due to variability and lack of flexibility in the existing system. The document reviews technology, policy, and modeling options to support a transition to a more flexible power system in India. This includes developing transmission infrastructure, exploiting pumped hydro storage, retrofitting coal plants, and innovative policies to drive investment in demand response and energy storage over the long term. Planning models need to improve to better consider operation-scale impacts of renewables and link different sector models.
This paper is related with the importance of the energy policy and renewable energy which play a important role in the development of the environmental benefits. India has a vast supply of renewable energy resources and it is one of the largest countries in the world for deploying renewable energy. This paper attempts to review the policies and planning measures undertaken by the Indian government for promotion of renewable energy. Low impact renewable energy (LIRE) technologies offer important benefits compared to conventional energy sources, such as fossil fuels or nuclear power. However due to their uncertainty different kinds of renewable-energy resources need to be operated in an integrated way, which complement each other. Global electricity demand is expected to increase considerably during the next decade and at the same time environmental pollution is also increasing with the development of conventional energy source. To meet the challenges for global energy demand various support schemes, policies and planning to promote use of renewable energy sources are discussed in this paper.
Development of a Cost Effective Power Generation System: An Overviewijeei-iaes
This document provides an overview of developing a cost effective power generation system. It discusses the integration of distributed generation (DG) sources like wind power into the electric grid. The key challenges of wind power integration are its variable and uncertain output, which can increase operating costs and impact system dispatch. The document outlines various studies on determining optimal reserve requirements and analyzing the effects of wind power on unit commitment and system operating costs over different timescales from minutes to days. Stochastic modeling approaches are needed to adequately address the variability of wind in power system operation and planning.
A Review of Hybrid Renewable Energy Systems for Electric Power GenerationIJERA Editor
This document provides a review of hybrid renewable energy systems technologies for electric power generation. It discusses important considerations in designing hybrid systems, including technology selection and sizing of system components. Various configurations for stand-alone and grid-connected hybrid systems are described. Advantages of hybrid systems include making use of complementary energy sources to improve overall efficiency and reliability. Issues such as intermittency of renewable sources and cost can be addressed through hybridization. The document concludes that hybrid energy systems represent a promising sustainable solution for power generation.
This document presents the results of a case study on residential energy consumption and awareness of energy management systems in Kajang and Putrajaya, Malaysia. Questionnaires were distributed to 384 residents to collect data on appliance usage and opinions. Actual energy consumption was also measured using a power quality analyzer. The study found that average daily energy use was 25.8 kWh on weekends and 21.9 kWh on weekdays, with air conditioners accounting for 11.5 kWh daily. Most respondents (89.1%) reported awareness of energy usage and willingness to use home automation to reduce bills.
This document discusses the deployment of microgrids in India. It addresses the economic issues and challenges associated with microgrid development in India. Key points include:
1) Microgrids make efficient use of distributed energy resources like solar, wind, and biomass to provide power, especially in remote rural areas of India.
2) Several pilot microgrid projects have been implemented in India using combinations of solar, biomass, and diesel generators. However, the high initial cost of microgrids has been a challenge to widespread adoption.
3) The document examines important economic issues that need to be addressed like cost of energy analysis, regulatory policies, and tariff structures to strengthen the economics of microgrids and justify their implementation in
Large scale grid amalgamation of renewable energy sources in indian power systemIjrdt Journal
This document discusses the challenges and solutions related to large-scale integration of renewable energy sources into India's power grid. The key points are:
1. Integrating renewable energy is challenging due to its intermittent nature and geographical distribution far from load centers. This requires improved transmission infrastructure and balancing across regions.
2. Distributed generation from renewables also presents issues if connected to medium and low voltage distribution systems. Solutions include intelligent grid configurations and prioritizing generation to match demand.
3. Potential solutions discussed are energy storage, power electronics to enable grid integration, distributing renewable generation over large areas, and using solar power for irrigation to match generation with load.
Comparative Study Improving Residential Load Factor Using Power Shifting and ...TELKOMNIKA JOURNAL
One the problem of electric power stability is due to load fluctuations in distribution system
especialy during peak load conditions. One solution which is applied in Smart Grid scheme is through load
shifting or power shifting. In load shifting the load with high power consumption which operates at peak
load shifted its operations outside of the peak load or s some loads with high power consumption do not
operate at the same time, there is a load whose operating time is shifted to reduce peak power. Power
shifting is used when energy from renewable source not directly suplied to load but storage first and
supplied to reduce high power consumption to reduce peak power. Low load factor, ratio between average
power to peak power, may affect to power system operation. If load factor of residential load can keep in
low, it will be certainly help improve the stabi lity of the power system. In this study we will examine the
comparison of load shifting method with power shifting in improving load factor. Load shifting is done to
water pumps and washing machines, because washing machine is shiftable load. Power shiftin g is made
to the output power of the solar power plant, which is used to reduce peak power from the water pump.
Test results show that power shifting can increase load factor value up to 54,9% while load shifting give
load factor value equal to 43,9%.
Transient Stability Assessment of Hybrid Distributed Generation Using Facts D...IJMERJOURNAL
ABSTRACT: Due to increasing integration of new technologies into the grid such as hybrid electric vehicles, distributed generations, power electronic interface circuits, advanced controllers etc., the present power system network is now more complex than in the past. Consequently, the recent rate of blackouts recorded in some parts of the world indicates that the power system is stressed. The real time/online monitoring and prediction of stability limit is needed to prevent future blackouts. The aggravated increase in energy demand has posed a serious problem for the power system’s stability and reliability, and hence has become of major concern. The shortcomings of conventional source of energy have paved way for renewable energy sources. The latter can form a part of a standalone system or grid connected system. A single renewable source of energy When integrated with other sources of energy it is termed as hybrid system. This thesis deals with PV, Wind, Hydro system. In this thesis an active power control strategy has been developed such that when the wind alone is not able to meet the energy demand, without compromising the frequency a transition occurs to wind diesel mode so that the energy demand is met. The mathematical model considered uses a STATCOM to meet the reactive power need upon sudden step change in power. The performance and the analysis is done in a user friendly MATLAB/Simulink environment.
This paper is related with the importance of the energy policy and renewable energy which play a important role in the development of the environmental benefits. India has a vast supply of renewable energy resources and it is one of the largest countries in the world for deploying renewable energy. This paper attempts to review the policies and planning measures undertaken by the Indian government for promotion of renewable energy. Low impact renewable energy (LIRE) technologies offer important benefits compared to conventional energy sources, such as fossil fuels or nuclear power. However due to their uncertainty different kinds of renewable-energy resources need to be operated in an integrated way, which complement each other. Global electricity demand is expected to increase considerably during the next decade and at the same time environmental pollution is also increasing with the development of conventional energy source. To meet the challenges for global energy demand various support schemes, policies and planning to promote use of renewable energy sources are discussed in this paper.
Development of a Cost Effective Power Generation System: An Overviewijeei-iaes
This document provides an overview of developing a cost effective power generation system. It discusses the integration of distributed generation (DG) sources like wind power into the electric grid. The key challenges of wind power integration are its variable and uncertain output, which can increase operating costs and impact system dispatch. The document outlines various studies on determining optimal reserve requirements and analyzing the effects of wind power on unit commitment and system operating costs over different timescales from minutes to days. Stochastic modeling approaches are needed to adequately address the variability of wind in power system operation and planning.
A Review of Hybrid Renewable Energy Systems for Electric Power GenerationIJERA Editor
This document provides a review of hybrid renewable energy systems technologies for electric power generation. It discusses important considerations in designing hybrid systems, including technology selection and sizing of system components. Various configurations for stand-alone and grid-connected hybrid systems are described. Advantages of hybrid systems include making use of complementary energy sources to improve overall efficiency and reliability. Issues such as intermittency of renewable sources and cost can be addressed through hybridization. The document concludes that hybrid energy systems represent a promising sustainable solution for power generation.
This document presents the results of a case study on residential energy consumption and awareness of energy management systems in Kajang and Putrajaya, Malaysia. Questionnaires were distributed to 384 residents to collect data on appliance usage and opinions. Actual energy consumption was also measured using a power quality analyzer. The study found that average daily energy use was 25.8 kWh on weekends and 21.9 kWh on weekdays, with air conditioners accounting for 11.5 kWh daily. Most respondents (89.1%) reported awareness of energy usage and willingness to use home automation to reduce bills.
This document discusses the deployment of microgrids in India. It addresses the economic issues and challenges associated with microgrid development in India. Key points include:
1) Microgrids make efficient use of distributed energy resources like solar, wind, and biomass to provide power, especially in remote rural areas of India.
2) Several pilot microgrid projects have been implemented in India using combinations of solar, biomass, and diesel generators. However, the high initial cost of microgrids has been a challenge to widespread adoption.
3) The document examines important economic issues that need to be addressed like cost of energy analysis, regulatory policies, and tariff structures to strengthen the economics of microgrids and justify their implementation in
Large scale grid amalgamation of renewable energy sources in indian power systemIjrdt Journal
This document discusses the challenges and solutions related to large-scale integration of renewable energy sources into India's power grid. The key points are:
1. Integrating renewable energy is challenging due to its intermittent nature and geographical distribution far from load centers. This requires improved transmission infrastructure and balancing across regions.
2. Distributed generation from renewables also presents issues if connected to medium and low voltage distribution systems. Solutions include intelligent grid configurations and prioritizing generation to match demand.
3. Potential solutions discussed are energy storage, power electronics to enable grid integration, distributing renewable generation over large areas, and using solar power for irrigation to match generation with load.
Comparative Study Improving Residential Load Factor Using Power Shifting and ...TELKOMNIKA JOURNAL
One the problem of electric power stability is due to load fluctuations in distribution system
especialy during peak load conditions. One solution which is applied in Smart Grid scheme is through load
shifting or power shifting. In load shifting the load with high power consumption which operates at peak
load shifted its operations outside of the peak load or s some loads with high power consumption do not
operate at the same time, there is a load whose operating time is shifted to reduce peak power. Power
shifting is used when energy from renewable source not directly suplied to load but storage first and
supplied to reduce high power consumption to reduce peak power. Low load factor, ratio between average
power to peak power, may affect to power system operation. If load factor of residential load can keep in
low, it will be certainly help improve the stabi lity of the power system. In this study we will examine the
comparison of load shifting method with power shifting in improving load factor. Load shifting is done to
water pumps and washing machines, because washing machine is shiftable load. Power shiftin g is made
to the output power of the solar power plant, which is used to reduce peak power from the water pump.
Test results show that power shifting can increase load factor value up to 54,9% while load shifting give
load factor value equal to 43,9%.
Transient Stability Assessment of Hybrid Distributed Generation Using Facts D...IJMERJOURNAL
ABSTRACT: Due to increasing integration of new technologies into the grid such as hybrid electric vehicles, distributed generations, power electronic interface circuits, advanced controllers etc., the present power system network is now more complex than in the past. Consequently, the recent rate of blackouts recorded in some parts of the world indicates that the power system is stressed. The real time/online monitoring and prediction of stability limit is needed to prevent future blackouts. The aggravated increase in energy demand has posed a serious problem for the power system’s stability and reliability, and hence has become of major concern. The shortcomings of conventional source of energy have paved way for renewable energy sources. The latter can form a part of a standalone system or grid connected system. A single renewable source of energy When integrated with other sources of energy it is termed as hybrid system. This thesis deals with PV, Wind, Hydro system. In this thesis an active power control strategy has been developed such that when the wind alone is not able to meet the energy demand, without compromising the frequency a transition occurs to wind diesel mode so that the energy demand is met. The mathematical model considered uses a STATCOM to meet the reactive power need upon sudden step change in power. The performance and the analysis is done in a user friendly MATLAB/Simulink environment.
Impacts of Demand Side Management on System Reliability Evaluationinventy
This summary provides an overview of the impacts of demand side management (DSM) techniques on power system reliability in Saudi Arabia:
1. DSM techniques like load shifting can improve power system reliability by transferring load from peak to off-peak periods, reducing peak demand and allowing generators to operate more efficiently.
2. The study models load shifting and adding renewable energy sources to the Riyadh power system and calculates reliability indices like loss of load probability (LOLP) and expected energy not served (EENS) to analyze the impacts on reliability.
3. Preliminary results show load shifting can reduce peak demand and renewable energy from solar and wind can further contribute to reliability by providing generation during peak periods.
This document summarizes a research paper that proposes a model for integrating renewable energy sources like wind and solar to power loads. The model uses MATLAB Simulink to simulate two generating units - a solar PV array and a wind turbine with doubly fed induction generator. It includes transmission systems to step up the voltages to 33kV for transmission over 30km lines, then step down to 230V for loads. The model automatically switches between the generating units based on the load to prevent overloading. When the solar output meets the load, excess solar is used to charge batteries. If the load increases above the solar capacity, the wind unit is switched in to support the load.
optimization of the managed electrical energy within a hybrid renewable energ...INFOGAIN PUBLICATION
Hybrid energy applications based on renewable energy sources are becoming more and more desirable every day. They have increased the economic attractiveness of renewable electric energy generation. Because of the sudden fluctuations of the load requirements, the main attribute of such Hybrid Systems is to be able to generate energy at any time by optimally using each source. In this article, we have proposed a combination between a sizing study and a control one for the aim of solving the complex optimization problem of finding the optimal combination of size and storage to make the best use of the renewable power generations and to become more independent of rising electricity costs. Additionally, an improvement in the induced optimization algorithm is introduced in this paper so as to compute the optimal size and the operation control of the system with the aim of minimizing as much as possible the cost while responding to the load energy requirements taking into account the environmental factors.
Improving Efficiency of Power Systems by Demand Side Management Method Yayah Zakaria
In the smart grid infrastructure based power systems, it is necessary to consider the demand side management to enhance the energy reduction and system control. In many countries the resources are very less so the available
resources have to be used in an efficient manner without any loss. The total loss cannot be avoided but it can be reduced. In the proposed system, the Particle Swarm Optimization (PSO) technique is used to distribute the power in the smart grid. Here, the grids are arranged in such a way that the losses in it are reduced. The load connected to the grid is rearranged according to their use. It uses a new and stochastic scheduling technique to handle the uncertainties in the power system. Solar and wind power are taken in account for twenty four hours and the values are given to the PSO algorithm. The experiment was conducted by MATLAB and the results show that the efficiency level of wind and solar power systems was increased by an appreciable level. The proposed technique is compared with the normal system without using Demand Side Management (DSM) and it shows that the proposed system gives better results than the existing systems.
IRJET- Review of Hybrid Solar PV and Wind SystemIRJET Journal
This document provides a review of hybrid solar PV and wind energy systems. It discusses how hybrid systems can provide reliable power by combining intermittent renewable sources. The summary is:
1) Hybrid solar PV and wind systems are reviewed as a solution to provide reliable electricity through combining sources with variable output like solar and wind.
2) Different technologies for hybrid systems are discussed, including optimal sizing methods to minimize costs and maximize reliability.
3) Hybrid systems combine solar, wind, and often batteries or other storage to provide continuous power when individual sources may be intermittent due to weather conditions.
Multi criteria decision model for biodiesel selection in an electrical powe...eSAT Publishing House
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
To forecast the future demand of electrical energy in india by arimaIAEME Publication
This document discusses forecasting future electricity demand in India using ARIMA and exponential time series methods. It provides background on India's growing electricity needs to sustain 8-10% economic growth over the next 25 years, which will require a 3-4 times increase in primary energy supply and 5-6 times increase in electricity generation. The document examines long-term electricity demand forecasting using ARIMA and exponential methods and finds exponential forecasting to be more accurate for long-term forecasting, while ARIMA is better for short-term. It analyzes forecasts that predict India will be unable to meet electricity demand growth with ARIMA but may be able to with exponential forecasting. The document also discusses methodology, factors
Sustainable development model of geothermal energyAlexander Decker
1) The document discusses a conceptual model for sustainable development of geothermal energy in Indonesia based on a case study of the Darajat Geothermal Power Plant.
2) It analyzes the economic feasibility and sustainability of geothermal energy development through methods like net present value calculation, multi-dimensional scaling, and interpretative structural modeling.
3) The analysis results are used to develop a conceptual model for sustainable geothermal energy development that includes a management system, funding support, management actors, and regulation management.
Optimal Hybrid Energy System for Rural Electrification in India using HOMER S...IRJET Journal
This document discusses the optimal design of a hybrid energy system for a village in India using the HOMER software. It analyzes a grid-connected hybrid system combining solar PV, diesel generator, battery storage, and grid connection. The system is designed to meet the village's daily electricity demand of 202 kWh and peak demand of 16.67 kW. Simulation results show the optimal system would include 14.6 kW of solar PV panels, 19 kW diesel generator, 56 batteries, and 16 kW converter. The levelized cost of electricity for this system would be $0.1903/kWh, lower than an off-grid system. The hybrid system would generate most power from the grid, but the solar PV and diesel generator
This document summarizes an article about India's energy policy and the need to promote renewable energy sources. It discusses how India has vast renewable energy resources and the government has implemented various policies and incentives to promote greater renewable energy deployment. The key challenges are India's limited fossil fuel reserves, high fuel transportation costs, aging conventional power plants, need to rationalize power tariffs, and reduce transmission and distribution losses in the power sector. The government is aiming to source 10% of additional grid power from renewable sources by 2012 to help address these challenges in a sustainable manner.
PV-solar / Wind Hybrid Energy System for GSM/CDMA Type Mobile Telephony Base ...IJERA Editor
This paper presents the design of optimized PV-Solar and Wind Hybrid Energy System for GSM/CDMA type mobile base station over conventional diesel generator for a particular site in south India (Chennai). For this hybrid system ,the meteorological data of Solar Insolation, hourly wind speed, are taken for Chennai (Longitude 80ο.16’and Latitude 13ο.5’ ) and the pattern of load consumption of mobile base station are studied and suitably modeled for optimization of the hybrid energy system using HOMER software. The simulation and optimization result gives the best optimized sizing of wind turbine and solar array with diesel generator for particular GSM/CDMA type mobile telephony base station. This system is more cost effective and environmental friendly over the conventional diesel generator. The presented system reduce approximate 70%-80% fuel cost over conventional diesel generator and also reduced the emission of CO2 and other harmful gasses in environments. It is expected that the proposed developed and installed system will provide very good opportunities for telecom sector in near future.
Economical and Reliable Expansion Alternative of Composite Power System under...IJECEIAES
The paper intends to select the most economical and reliable expansion alternative of a composite power system to meet the expected future load growth. In order to reduce time computational quantity, a heuristic algorithm is adopted for composite power system reliability evaluation is proposed. The proposed algorithm is based on Monte-Carlo simulation method. The reliability indices are estimated for system base case and for the case of adding peaking generation units. The least cost reserve margin for the addition of five 20MW generating units sequentially is determined. Using the proposed algorithm an increment comparison approach used to illustrate the effect of the added units on the interruption and on the annual net gain costs. A flow chart introduced to explain the basic methodology to have an adequate assessment of a power system using Monte Carlo Simulation. The IEEE RTS (24-bus, 38-line) and The Jordanian Electrical Power System (46bus and 92-line) were examined to illustrate how to make decisions in power system planning and expansions.
Integration Planning and Operation Scheduling of Distribution Generation for ...IJERA Editor
Use of distributed renewable energy sources for domestic energy consumption will increase in near future due to
its advantages as being clean and infinite energy generation possibility. This trend allows more efficient energy
consumption because of reducing distribution losses and dependence of domestic appliances to grid distribution.
Electrical energy is an essential ingredient for the development of a nation. In this paper, it is proposed grid
connected solar PV without and with battery at domestic level to minimize the load on live grid during peak
time, excess power export to the grid when the PV generation is more compared to connected load and increase
the participation of renewable energy sources in our daily energy consumption. The decision support program
enables the consumer to implement the most efficient electricity management strategy while achieving the goal
of minimizing the electricity bill and to supply the quality power. The cost of investment and payback periods
are computed for PV system using cost benefit analysis
The document discusses environmental/economic scheduling of renewable energy resources in a micro-grid. It proposes a multi-objective framework to minimize the total operation cost and emission from generating units. Lexicographic optimization and a hybrid augmented-weighted epsilon-constraint method are used to solve the multi-objective optimization problem and generate Pareto optimal solutions. The decision making process uses a fuzzy technique. Case studies show the proposed method improves solutions for cost, emission, and execution time compared to other methods.
Design analysis for solar photovoltaic with and without nemyhckelvin
This document summarizes the design and analysis of a residential solar photovoltaic system in Kuching, Sarawak, Malaysia with and without a Net Energy Metering (NEM) scheme. A 7kW solar PV system was designed for a house using 240W panels and a 7kW inverter. System costs, annual energy generation of around 7,017 kWh, and financial metrics like return on investment were simulated over 25 years using the System Advisor Model software. The results of simulations with and without NEM were compared, finding that the key differences were in how excess solar energy would be treated - under NEM it could be exported to the grid at a set rate, while without NEM it
This document summarizes India's energy policy and the role of renewable energy. It discusses how India has a vast supply of renewable resources and is one of the largest countries deploying renewables. The document outlines various support schemes and policies India has adopted to promote renewable energy sources in its restructured power sector to meet future energy demand in a sustainable way. It also analyzes different energy planning tools used for energy policy planning and explains why the ENPEP-BALANCE tool was chosen to carry out energy system planning for India.
This document summarizes an article about India's energy policy and the need to promote renewable energy sources. It discusses how India has vast renewable energy resources and the government has implemented various policies and incentives to promote greater renewable energy deployment. The key challenges are India's limited fossil fuel reserves, high fuel transportation costs, aging conventional power plants, need to rationalize power tariffs, and reduce transmission and distribution losses in the power sector. The government is aiming to source 10% of additional grid power capacity from renewable sources by 2012 to help address these issues through its renewable energy policies.
Forecasting and Scheduling of Wind and Solar Power generation in IndiaDas A. K.
The document discusses forecasting and scheduling of wind and solar power generation in India. It notes that wind and solar power are variable and intermittent, posing grid integration challenges. Accurate forecasting is needed to schedule renewable energy and minimize penalties for deviations under India's electricity regulations. The document presents methods for quantifying the variability of wind and solar power, calculating forecasting accuracy and associated penalties, and describes an artificial intelligence technique for wind/solar forecasting developed by the author's company.
Forecasting and scheduling of wind and solar power generation in indiaDas A. K.
This document discusses forecasting and scheduling of wind and solar power generation in India. It notes that wind and solar energy are major sources of renewable energy in India, but their variability poses challenges for grid integration. Accurate forecasting of wind and solar power is needed to effectively integrate renewable energy into the grid. The document examines regulations in India requiring day-ahead forecasting and scheduling of wind and solar power and explores methods for improving forecast accuracy to minimize penalties for deviations from forecasts.
Forecasting and Scheduling of Wind and Solar Power generation in Indiadel2infinity Energy
This document discusses forecasting and scheduling of wind and solar power generation in India. It notes that wind and solar energy are major sources of renewable energy in India, but their variability poses challenges for grid integration. Accurate forecasting of wind and solar power is needed to effectively integrate renewable energy into the grid. The document examines regulations in India requiring day-ahead forecasting and scheduling of wind and solar energy. It also discusses penalty calculations for inaccurate forecasts. The paper aims to show how mixed artificial intelligence techniques can improve forecasting of wind and solar generation to minimize penalties from forecast errors.
Reconceptualizing the Application of Renewable Energy Sources in Industry: A ...IRJET Journal
This document provides a review of applying renewable energy sources in industries. It discusses how renewable sources like solar, wind and biomass could provide nearly 50% of industrial energy needs by 2050 at a favorable cost compared to other sources. Solar energy is expected to be the dominant renewable source due to its compatibility with various systems. The document proposes several frameworks for better utilizing renewable sources in industries and overcoming challenges like intermittent output. It also summarizes research on applying renewable energy to industries and estimates future global energy consumption and the potential role of biomass and solar specifically. Modeling software can help evaluate renewable energy system designs for industries.
A comparative assessment of energy management system and strategies in kanpurIAEME Publication
This document summarizes a research paper on assessing energy management systems and strategies in Kanpur City, India. It conducted surveys of domestic and industrial users as well as power agencies on issues like energy losses, production costs, and distribution costs. The surveys found that the energy system needs much improvement. This can be done through technical solutions like tamper-proof meters, managerial methods like distribution system monitoring, and restructuring ownership and regulation of power systems. A bottom-up distributed generation approach is proposed to add power capacity in a more distributed manner as demand grows gradually over time.
Impacts of Demand Side Management on System Reliability Evaluationinventy
This summary provides an overview of the impacts of demand side management (DSM) techniques on power system reliability in Saudi Arabia:
1. DSM techniques like load shifting can improve power system reliability by transferring load from peak to off-peak periods, reducing peak demand and allowing generators to operate more efficiently.
2. The study models load shifting and adding renewable energy sources to the Riyadh power system and calculates reliability indices like loss of load probability (LOLP) and expected energy not served (EENS) to analyze the impacts on reliability.
3. Preliminary results show load shifting can reduce peak demand and renewable energy from solar and wind can further contribute to reliability by providing generation during peak periods.
This document summarizes a research paper that proposes a model for integrating renewable energy sources like wind and solar to power loads. The model uses MATLAB Simulink to simulate two generating units - a solar PV array and a wind turbine with doubly fed induction generator. It includes transmission systems to step up the voltages to 33kV for transmission over 30km lines, then step down to 230V for loads. The model automatically switches between the generating units based on the load to prevent overloading. When the solar output meets the load, excess solar is used to charge batteries. If the load increases above the solar capacity, the wind unit is switched in to support the load.
optimization of the managed electrical energy within a hybrid renewable energ...INFOGAIN PUBLICATION
Hybrid energy applications based on renewable energy sources are becoming more and more desirable every day. They have increased the economic attractiveness of renewable electric energy generation. Because of the sudden fluctuations of the load requirements, the main attribute of such Hybrid Systems is to be able to generate energy at any time by optimally using each source. In this article, we have proposed a combination between a sizing study and a control one for the aim of solving the complex optimization problem of finding the optimal combination of size and storage to make the best use of the renewable power generations and to become more independent of rising electricity costs. Additionally, an improvement in the induced optimization algorithm is introduced in this paper so as to compute the optimal size and the operation control of the system with the aim of minimizing as much as possible the cost while responding to the load energy requirements taking into account the environmental factors.
Improving Efficiency of Power Systems by Demand Side Management Method Yayah Zakaria
In the smart grid infrastructure based power systems, it is necessary to consider the demand side management to enhance the energy reduction and system control. In many countries the resources are very less so the available
resources have to be used in an efficient manner without any loss. The total loss cannot be avoided but it can be reduced. In the proposed system, the Particle Swarm Optimization (PSO) technique is used to distribute the power in the smart grid. Here, the grids are arranged in such a way that the losses in it are reduced. The load connected to the grid is rearranged according to their use. It uses a new and stochastic scheduling technique to handle the uncertainties in the power system. Solar and wind power are taken in account for twenty four hours and the values are given to the PSO algorithm. The experiment was conducted by MATLAB and the results show that the efficiency level of wind and solar power systems was increased by an appreciable level. The proposed technique is compared with the normal system without using Demand Side Management (DSM) and it shows that the proposed system gives better results than the existing systems.
IRJET- Review of Hybrid Solar PV and Wind SystemIRJET Journal
This document provides a review of hybrid solar PV and wind energy systems. It discusses how hybrid systems can provide reliable power by combining intermittent renewable sources. The summary is:
1) Hybrid solar PV and wind systems are reviewed as a solution to provide reliable electricity through combining sources with variable output like solar and wind.
2) Different technologies for hybrid systems are discussed, including optimal sizing methods to minimize costs and maximize reliability.
3) Hybrid systems combine solar, wind, and often batteries or other storage to provide continuous power when individual sources may be intermittent due to weather conditions.
Multi criteria decision model for biodiesel selection in an electrical powe...eSAT Publishing House
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
To forecast the future demand of electrical energy in india by arimaIAEME Publication
This document discusses forecasting future electricity demand in India using ARIMA and exponential time series methods. It provides background on India's growing electricity needs to sustain 8-10% economic growth over the next 25 years, which will require a 3-4 times increase in primary energy supply and 5-6 times increase in electricity generation. The document examines long-term electricity demand forecasting using ARIMA and exponential methods and finds exponential forecasting to be more accurate for long-term forecasting, while ARIMA is better for short-term. It analyzes forecasts that predict India will be unable to meet electricity demand growth with ARIMA but may be able to with exponential forecasting. The document also discusses methodology, factors
Sustainable development model of geothermal energyAlexander Decker
1) The document discusses a conceptual model for sustainable development of geothermal energy in Indonesia based on a case study of the Darajat Geothermal Power Plant.
2) It analyzes the economic feasibility and sustainability of geothermal energy development through methods like net present value calculation, multi-dimensional scaling, and interpretative structural modeling.
3) The analysis results are used to develop a conceptual model for sustainable geothermal energy development that includes a management system, funding support, management actors, and regulation management.
Optimal Hybrid Energy System for Rural Electrification in India using HOMER S...IRJET Journal
This document discusses the optimal design of a hybrid energy system for a village in India using the HOMER software. It analyzes a grid-connected hybrid system combining solar PV, diesel generator, battery storage, and grid connection. The system is designed to meet the village's daily electricity demand of 202 kWh and peak demand of 16.67 kW. Simulation results show the optimal system would include 14.6 kW of solar PV panels, 19 kW diesel generator, 56 batteries, and 16 kW converter. The levelized cost of electricity for this system would be $0.1903/kWh, lower than an off-grid system. The hybrid system would generate most power from the grid, but the solar PV and diesel generator
This document summarizes an article about India's energy policy and the need to promote renewable energy sources. It discusses how India has vast renewable energy resources and the government has implemented various policies and incentives to promote greater renewable energy deployment. The key challenges are India's limited fossil fuel reserves, high fuel transportation costs, aging conventional power plants, need to rationalize power tariffs, and reduce transmission and distribution losses in the power sector. The government is aiming to source 10% of additional grid power from renewable sources by 2012 to help address these challenges in a sustainable manner.
PV-solar / Wind Hybrid Energy System for GSM/CDMA Type Mobile Telephony Base ...IJERA Editor
This paper presents the design of optimized PV-Solar and Wind Hybrid Energy System for GSM/CDMA type mobile base station over conventional diesel generator for a particular site in south India (Chennai). For this hybrid system ,the meteorological data of Solar Insolation, hourly wind speed, are taken for Chennai (Longitude 80ο.16’and Latitude 13ο.5’ ) and the pattern of load consumption of mobile base station are studied and suitably modeled for optimization of the hybrid energy system using HOMER software. The simulation and optimization result gives the best optimized sizing of wind turbine and solar array with diesel generator for particular GSM/CDMA type mobile telephony base station. This system is more cost effective and environmental friendly over the conventional diesel generator. The presented system reduce approximate 70%-80% fuel cost over conventional diesel generator and also reduced the emission of CO2 and other harmful gasses in environments. It is expected that the proposed developed and installed system will provide very good opportunities for telecom sector in near future.
Economical and Reliable Expansion Alternative of Composite Power System under...IJECEIAES
The paper intends to select the most economical and reliable expansion alternative of a composite power system to meet the expected future load growth. In order to reduce time computational quantity, a heuristic algorithm is adopted for composite power system reliability evaluation is proposed. The proposed algorithm is based on Monte-Carlo simulation method. The reliability indices are estimated for system base case and for the case of adding peaking generation units. The least cost reserve margin for the addition of five 20MW generating units sequentially is determined. Using the proposed algorithm an increment comparison approach used to illustrate the effect of the added units on the interruption and on the annual net gain costs. A flow chart introduced to explain the basic methodology to have an adequate assessment of a power system using Monte Carlo Simulation. The IEEE RTS (24-bus, 38-line) and The Jordanian Electrical Power System (46bus and 92-line) were examined to illustrate how to make decisions in power system planning and expansions.
Integration Planning and Operation Scheduling of Distribution Generation for ...IJERA Editor
Use of distributed renewable energy sources for domestic energy consumption will increase in near future due to
its advantages as being clean and infinite energy generation possibility. This trend allows more efficient energy
consumption because of reducing distribution losses and dependence of domestic appliances to grid distribution.
Electrical energy is an essential ingredient for the development of a nation. In this paper, it is proposed grid
connected solar PV without and with battery at domestic level to minimize the load on live grid during peak
time, excess power export to the grid when the PV generation is more compared to connected load and increase
the participation of renewable energy sources in our daily energy consumption. The decision support program
enables the consumer to implement the most efficient electricity management strategy while achieving the goal
of minimizing the electricity bill and to supply the quality power. The cost of investment and payback periods
are computed for PV system using cost benefit analysis
The document discusses environmental/economic scheduling of renewable energy resources in a micro-grid. It proposes a multi-objective framework to minimize the total operation cost and emission from generating units. Lexicographic optimization and a hybrid augmented-weighted epsilon-constraint method are used to solve the multi-objective optimization problem and generate Pareto optimal solutions. The decision making process uses a fuzzy technique. Case studies show the proposed method improves solutions for cost, emission, and execution time compared to other methods.
Design analysis for solar photovoltaic with and without nemyhckelvin
This document summarizes the design and analysis of a residential solar photovoltaic system in Kuching, Sarawak, Malaysia with and without a Net Energy Metering (NEM) scheme. A 7kW solar PV system was designed for a house using 240W panels and a 7kW inverter. System costs, annual energy generation of around 7,017 kWh, and financial metrics like return on investment were simulated over 25 years using the System Advisor Model software. The results of simulations with and without NEM were compared, finding that the key differences were in how excess solar energy would be treated - under NEM it could be exported to the grid at a set rate, while without NEM it
This document summarizes India's energy policy and the role of renewable energy. It discusses how India has a vast supply of renewable resources and is one of the largest countries deploying renewables. The document outlines various support schemes and policies India has adopted to promote renewable energy sources in its restructured power sector to meet future energy demand in a sustainable way. It also analyzes different energy planning tools used for energy policy planning and explains why the ENPEP-BALANCE tool was chosen to carry out energy system planning for India.
This document summarizes an article about India's energy policy and the need to promote renewable energy sources. It discusses how India has vast renewable energy resources and the government has implemented various policies and incentives to promote greater renewable energy deployment. The key challenges are India's limited fossil fuel reserves, high fuel transportation costs, aging conventional power plants, need to rationalize power tariffs, and reduce transmission and distribution losses in the power sector. The government is aiming to source 10% of additional grid power capacity from renewable sources by 2012 to help address these issues through its renewable energy policies.
Forecasting and Scheduling of Wind and Solar Power generation in IndiaDas A. K.
The document discusses forecasting and scheduling of wind and solar power generation in India. It notes that wind and solar power are variable and intermittent, posing grid integration challenges. Accurate forecasting is needed to schedule renewable energy and minimize penalties for deviations under India's electricity regulations. The document presents methods for quantifying the variability of wind and solar power, calculating forecasting accuracy and associated penalties, and describes an artificial intelligence technique for wind/solar forecasting developed by the author's company.
Forecasting and scheduling of wind and solar power generation in indiaDas A. K.
This document discusses forecasting and scheduling of wind and solar power generation in India. It notes that wind and solar energy are major sources of renewable energy in India, but their variability poses challenges for grid integration. Accurate forecasting of wind and solar power is needed to effectively integrate renewable energy into the grid. The document examines regulations in India requiring day-ahead forecasting and scheduling of wind and solar power and explores methods for improving forecast accuracy to minimize penalties for deviations from forecasts.
Forecasting and Scheduling of Wind and Solar Power generation in Indiadel2infinity Energy
This document discusses forecasting and scheduling of wind and solar power generation in India. It notes that wind and solar energy are major sources of renewable energy in India, but their variability poses challenges for grid integration. Accurate forecasting of wind and solar power is needed to effectively integrate renewable energy into the grid. The document examines regulations in India requiring day-ahead forecasting and scheduling of wind and solar energy. It also discusses penalty calculations for inaccurate forecasts. The paper aims to show how mixed artificial intelligence techniques can improve forecasting of wind and solar generation to minimize penalties from forecast errors.
Reconceptualizing the Application of Renewable Energy Sources in Industry: A ...IRJET Journal
This document provides a review of applying renewable energy sources in industries. It discusses how renewable sources like solar, wind and biomass could provide nearly 50% of industrial energy needs by 2050 at a favorable cost compared to other sources. Solar energy is expected to be the dominant renewable source due to its compatibility with various systems. The document proposes several frameworks for better utilizing renewable sources in industries and overcoming challenges like intermittent output. It also summarizes research on applying renewable energy to industries and estimates future global energy consumption and the potential role of biomass and solar specifically. Modeling software can help evaluate renewable energy system designs for industries.
A comparative assessment of energy management system and strategies in kanpurIAEME Publication
This document summarizes a research paper on assessing energy management systems and strategies in Kanpur City, India. It conducted surveys of domestic and industrial users as well as power agencies on issues like energy losses, production costs, and distribution costs. The surveys found that the energy system needs much improvement. This can be done through technical solutions like tamper-proof meters, managerial methods like distribution system monitoring, and restructuring ownership and regulation of power systems. A bottom-up distributed generation approach is proposed to add power capacity in a more distributed manner as demand grows gradually over time.
A Study on Intelligent Management of Electrical Systems in Industriesijtsrd
It has been a rapid rise in the automation of public electricity distribution in the last several years. We can utilise the same framework to construct new intelligent applications for industrial power distribution networks. Today, there is a demand for new applications in the industrial sector and in response to various environmental changes. Using the information in this blog, we can have a better understanding of how industrial electric systems are managed and how new applications and methods for managing distribution and monitoring industrial networks can be implemented. The topic of energy management has grown in relevance and complexity in recent years. It entails selecting from among a variety of energy sources those that can provide power to a variety of loads while reducing losses and expense. The systems response, the selection of sources, must be done in real time to minimise power outages due to the heterogeneous, distributed nature of the sources and loads. Micro grid is a grouping of interconnected power sources and loads that can self regulate in order to maximise a variety of factors, including but not limited to cost and efficiency. Shibu Ganesh | Harish Kumar V C "A Study on Intelligent Management of Electrical Systems in Industries" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-6 | Issue-4 , June 2022, URL: https://www.ijtsrd.com/papers/ijtsrd50169.pdf Paper URL: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/50169/a-study-on-intelligent-management-of-electrical-systems-in-industries/shibu-ganesh
Dr. Rahul Walawalkar presented on opportunities for energy storage in India to address infrastructure challenges. India is experiencing rapid economic growth and increasing energy demand. Significant renewable energy capacity additions are planned but introduce grid integration challenges due to intermittent output. Energy storage can help integrate renewables by managing variability and outages. The India Energy Storage Alliance was formed to promote energy storage technologies and applications like transmission upgrade deferral, ancillary services, and microgrids.
Power System Reliability Assessment in a Complex Restructured Power SystemIJECEIAES
The basic purpose of an electric power system is to supply its consumers with electric energy as parsimoniously as possible and with a sensible degree of continuity and quality. It is expected that the solicitation of power system reliability assessment in bulk power systems will continue to increase in the future especially in the newly deregulated power diligence. This paper presents the research conducted on the three areas of incorporating multi-state generating unit models, evaluating system performance indices and identifying transmission paucities in complex system adequacy assessment. The incentives for electricity market participants to endow in new generation and transmission facilities are highly influenced by the market risk in a complex restructured environment. This paper also presents a procedure to identify transmission deficiencies and remedial modification in the composite generation and transmission system and focused on the application of probabilistic techniques in composite system adequacy assessment
Analysis of factors for enhancing energy conservation in indian railway works...eSAT Publishing House
This document summarizes a study analyzing factors that influence energy conservation in Indian railway workshops. It discusses energy usage at the Carriage Repair Workshop in Hubli and Central Workshops in Mysore. 25 variables that could potentially impact energy conservation efforts were identified through interviews. A questionnaire was administered to 71 respondents at Hubli and 57 at Mysore to understand preferences on these variables. Principal component analysis identified 8 key factors: motivation for employees, knowledge and attitude, preventive measures, timely decision making, motivation for energy conservation, management role, procurement process, and human factors. The study aims to provide insights for improving energy conservation policies and strategies in Indian railway workshops.
Generator Maintenance Scheduling Of Power System Using Hybrid TechniqueIRJET Journal
This document discusses generator maintenance scheduling for power systems using hybrid techniques. It aims to minimize total operation costs while satisfying constraints. The scheduling problem is complex with many generating units and constraints to consider. Traditional methods cannot solve large, real-world problems due to computational limitations. The document proposes using metaheuristic techniques like genetic algorithms, particle swarm optimization, and simulated annealing to find near-optimal schedules efficiently for large power systems over long time horizons. These evolutionary algorithms are better suited than traditional methods at handling complex, constrained optimization problems.
The document discusses the need for grid-scale energy storage in India to support its renewable energy goals. As India aims to source 50% of its electricity from renewables by 2030, large amounts of variable renewable generation like solar and wind will pose challenges for grid stability and reliability. Energy storage can help balance the grid by storing excess renewable energy and dispatching it when renewable output is low. The document assesses various energy storage technologies based on their power and energy density, technological maturity, efficiency, lifetime costs, response time, and environmental impacts to determine their suitability for the Indian grid. It finds that pumped hydro, lithium-ion batteries, and thermal storage show potential to facilitate India's renewable energy integration if deployed appropriately.
Advancements and Challenges in Hybrid Renewable Energy Systems: A Comprehensi...IRJET Journal
This document provides a comprehensive literature review of advancements and challenges in hybrid renewable energy systems (HRES). It examines recent research on optimizing HRES design through techniques like HOMER software and mathematical modeling. Key challenges discussed include accurate site selection, renewable resource forecasting, and determining optimal component sizing. The future prospects of HRES integration with additional renewable sources like hydroelectric, biomass and fuel cells is also explored. The review concludes that continued research and technology advances can help HRES play a vital role in achieving sustainable energy goals through reliable, clean energy solutions.
Design Model of Photovoltaic System using PID Controlled Multi Level Inverterijtsrd
Solar energy is considered as the energy that will rule the world in coming time Various modern algorithms have been designed by different researchers to get the maximum output from the PV such as incremented conductance method, perturbing and observing method, sweeping current type method, constant voltage type method, and comparison method etc. various authors intend to produce a better algorithm reliable and efficient to suck the maximum possible energy from the PV panel. It is obvious that though renewable energy is available at free of cost it involves much of capital cost. Hence it is very important to improve its efficiency. Since these energies are natural resources, the availability is not constant. There will be always fluctuations in the output. The paper presents different stages of Solar Power plant are combined and a simulation of PV power system integrated with grid is implemented and all the results are displayed for the comparison. The results obtained have shown the robustness in term of THD level, stability of different parameters, and the tuned D.C. Voltage of the PV system with maximum power of the PV capacity. Farman Fayaz | Nirma Kumari Sharma | Deepak Kumar Joshi "Design Model of Photovoltaic System using PID Controlled Multi-Level Inverter" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-6 | Issue-4 , June 2022, URL: https://www.ijtsrd.com/papers/ijtsrd50071.pdf Paper URL: https://www.ijtsrd.com/engineering/electrical-engineering/50071/design-model-of-photovoltaic-system-using-pid-controlled-multilevel-inverter/farman-fayaz
Context of smart grids in india knowledge paper of india smart grid day 2013L&C
This document discusses regulatory support needed for smart grid projects in India. It outlines three key areas of regulatory focus: economic regulation, safety and standards, and awareness and capacity building. Some challenges in these areas include the lack of optimal tariff design, investment approval mechanisms, interoperability standards, cyber security standards, and consumer awareness. Suggested interventions include introducing time-of-use tariffs, facilitating investment approvals, developing interoperability and cyber security standards, and conducting capacity building and consumer education programs. State regulatory commissions can support smart grid projects by leveraging factors in the Electricity Act that encourage competition, efficiency and optimal investments.
Techno economic analysis of SPV-DG hybrid model using HOMERIRJET Journal
This document summarizes a study that conducts a techno-economic analysis of a solar photovoltaic (SPV)-diesel generator (DG) hybrid energy system model implemented in Leh, India. The HOMER software is used to optimize and simulate the SPV-DG hybrid system. Simulation results are analyzed to determine the optimal sizing of SPV and DG components and overall system performance. A life cycle cost analysis is performed considering capital, operating, maintenance and fuel costs. The study also examines the environmental impacts of the SPV-DG system, focusing on reductions in greenhouse gas emissions and fossil fuel dependence.
An Overview of the Home Energy Management Systems Considering Different Types...IRJET Journal
This document provides an overview of home energy management systems (HEMS), including their architecture, components, and power scheduling strategies. It discusses how HEMS can optimize household appliance scheduling to reduce electricity costs and peak demand while maintaining user comfort. Various power scheduling techniques for HEMS are reviewed, such as optimization algorithms, fuzzy logic control, and mixed-integer nonlinear optimization. The document also compares different types of demand response programs that can be integrated with HEMS for dynamic energy management.
State of Art Technologies in Power DistributionIRJET Journal
This document discusses state-of-the-art technologies in power distribution in India. It first provides background on the importance of efficient power distribution and some of the challenges faced. It then outlines various government initiatives to improve distribution, including programs to modernize infrastructure through smart grid technologies. Specific technologies discussed that can help optimize distribution include smart meters, automatic distribution systems, integrated voltage control, and demand optimization through selective load control. The document advocates for replacing aging infrastructure with smart grid systems to improve reliability, efficiency, and management of the electrical network.
Similar to Flexibility requirement for large-scale renewable energy integration in Indian power system (20)
The document provides highlights and key insights from the DNV Energy Transition Outlook 2021 report. It finds that:
1) Global emissions are not decreasing fast enough to meet Paris Agreement goals, and warming is projected to reach 2.3°C by 2100 despite renewable growth.
2) Electrification is surging, with renewables like solar and wind outcompeting other sources by 2030 and providing over 80% of power by 2050, supported by technologies like storage.
3) Energy efficiency gains lead to flat global energy demand after the 2030s, with a 2.4% annual improvement in energy intensity outpacing economic growth.
Thermography test of electrical panels Thermography test of electrical panelThermography test of electrical panelThermography test of electrical panelThermography test of electrical panelThermography test of electrical panelThermography test of electrical panelThermography test of electrical panelThermography test of electrical panelThermography test of electrical panelThermography test of electrical panelThermography test of electrical panelThermography test of electrical panelThermography test of electrical panelThermography test of electrical panelThermography test of electrical panelThermography test of electrical panel
What does peak shaving meanWhat does peak shaving meanWhat does peak shaving meanWhat does peak shaving meanWhat does peak shaving meanWhat does peak shaving meanWhat does peak shaving meanWhat does peak shaving meanWhat does peak shaving meanWhat does peak shaving meanWhat does peak shaving meanWhat does peak shaving meanWhat does peak shaving meanWhat does peak shaving mean
Power System Restoration Guide Power System Restoration Guide Power System Restoration Guide Power System Restoration Guide Power System Restoration Guide Power System Restoration Guide Power System Restoration Guide Power System Restoration Guide Power System Restoration Guide Power System Restoration Guide Power System Restoration Guide Power System Restoration Guide Power System Restoration Guide Power System Restoration Guide Power System Restoration Guide Power System Restoration Guide Power System Restoration Guide Power System Restoration Guide Power System Restoration Guide Power System Restoration Guide Power System Restoration Guide Power System Restoration Guide Power System Restoration Guide Power System Restoration Guide Power System Restoration Guide Power System Restoration Guide Power System Restoration Guide Power System Restoration Guide Power System Restoration Guide Power System Restoration Guide Power System Restoration Guide Power System Restoration Guide
Big data analytics Big data analyticsBig data analyticsBig data analyticsBig data analyticsBig data analyticsBig data analyticsBig data analyticsBig data analyticsBig data analyticsBig data analyticsBig data analyticsBig data analyticsBig data analyticsBig data analyticsBig data analyticsBig data analyticsBig data analyticsBig data analyticsBig data analytics
Special Protection Scheme Remedial Action Scheme
SPS to RAS Special Protection Scheme Remedial Action SchemeSPS to RAS Special Protection Scheme Remedial Action SchemeSPS to RAS Special Protection Scheme Remedial Action SchemeSPS to RAS Special Protection Scheme Remedial Action SchemeSPS to RAS Special Protection Scheme Remedial Action SchemeSPS to RAS Special Protection Scheme Remedial Action SchemeSPS to RAS Special Protection Scheme Remedial Action SchemeSPS to RAS Special Protection Scheme Remedial Action SchemeSPS to RAS Special Protection Scheme Remedial Action SchemeSPS to RAS Special Protection Scheme Remedial Action SchemeSPS to RAS Special Protection Scheme Remedial Action SchemeSPS to RAS Special Protection Scheme Remedial Action SchemeSPS to RAS Special Protection Scheme Remedial Action SchemeSPS to RAS Special Protection Scheme Remedial Action SchemeSPS to RAS Special Protection Scheme Remedial Action SchemeSPS to RAS Special Protection Scheme Remedial Action SchemeSPS to RAS Special Protection Scheme Remedial Action SchemeSPS to RAS Special Protection Scheme Remedial Action SchemeSPS to RAS Special Protection Scheme Remedial Action SchemeSPS to RAS Special Protection Scheme Remedial Action SchemeSPS to RAS Special Protection Scheme Remedial Action SchemeSPS to RAS Special Protection Scheme Remedial Action SchemeSPS to RAS Special Protection Scheme Remedial Action SchemeSPS to RAS Special Protection Scheme Remedial Action SchemeSPS to RAS Special Protection Scheme Remedial Action SchemeSPS to RAS Special Protection Scheme Remedial Action SchemeSPS to RAS Special Protection Scheme Remedial Action SchemeSPS to RAS Special Protection Scheme Remedial Action SchemeSPS to RAS Special Protection Scheme Remedial Action SchemeSPS to RAS Special Protection Scheme Remedial Action SchemeSPS to RAS Special Protection Scheme Remedial Action SchemeSPS to RAS Special Protection Scheme Remedial Action SchemeSPS to RAS Special Protection Scheme Remedial Action SchemeSPS to RAS Special Protection Scheme Remedial Action SchemeSPS to RAS Special Protection Scheme Remedial Action SchemeSPS to RAS Special Protection Scheme Remedial Action SchemeSPS to RAS Special Protection Scheme Remedial Action SchemeSPS to RAS Special Protection Scheme Remedial Action SchemeSPS to RAS Special Protection Scheme Remedial Action SchemeSPS to RAS Special Protection Scheme Remedial Action SchemeSPS to RAS Special Protection Scheme Remedial Action SchemeSPS to RAS Special Protection Scheme Remedial Action SchemeSPS to RAS Special Protection Scheme Remedial Action SchemeSPS to RAS Special Protection Scheme Remedial Action SchemeSPS to RAS Special Protection Scheme Remedial Action SchemeSPS to RAS Special Protection Scheme Remedial Action SchemeSPS to RAS Special Protection Scheme Remedial Action SchemeSPS to RAS Special Protection Scheme Remedial Action Scheme
SVC PLUS Frequency Stabilizer Frequency and voltage support for dynamic grid...Power System Operation
SVC PLUS
Frequency Stabilizer
Frequency and voltage support for dynamic grid stability
SVC PLUS Frequency Stabilizer FrequencySVC PLUS Frequency Stabilizer FrequencySVC PLUS Frequency Stabilizer FrequencySVC PLUS Frequency Stabilizer FrequencySVC PLUS Frequency Stabilizer FrequencySVC PLUS Frequency Stabilizer FrequencySVC PLUS Frequency Stabilizer FrequencySVC PLUS Frequency Stabilizer FrequencySVC PLUS Frequency Stabilizer FrequencySVC PLUS Frequency Stabilizer FrequencySVC PLUS Frequency Stabilizer FrequencySVC PLUS Frequency Stabilizer FrequencySVC PLUS Frequency Stabilizer FrequencySVC PLUS Frequency Stabilizer FrequencySVC PLUS Frequency Stabilizer FrequencySVC PLUS Frequency Stabilizer FrequencySVC PLUS Frequency Stabilizer FrequencySVC PLUS Frequency Stabilizer FrequencySVC PLUS Frequency Stabilizer FrequencySVC PLUS Frequency Stabilizer Frequency
What is load management What is load managementWhat is load managementWhat is load managementWhat is load managementWhat is load managementWhat is load managementWhat is load managementWhat is load managementWhat is load managementWhat is load managementWhat is load managementWhat is load managementWhat is load managementWhat is load managementWhat is load managementWhat is load managementWhat is load managementWhat is load managementWhat is load managementWhat is load managementWhat is load managementWhat is load managementWhat is load managementWhat is load managementWhat is load managementWhat is load managementWhat is load managementWhat is load managementWhat is load managementWhat is load managementWhat is load managementWhat is load managementWhat is load managementWhat is load managementWhat is load managementWhat is load managementWhat is load managementWhat is load managementWhat is load managementWhat is load managementWhat is load managementWhat is load managementWhat is load managementWhat is load managementWhat is load management
What does merit order mean What does merit order meanWhat does merit order meanWhat does merit order meanWhat does merit order meanWhat does merit order meanWhat does merit order meanWhat does merit order meanWhat does merit order meanWhat does merit order meanWhat does merit order meanWhat does merit order meanWhat does merit order meanWhat does merit order meanWhat does merit order meanWhat does merit order meanWhat does merit order meanWhat does merit order meanWhat does merit order meanWhat does merit order meanWhat does merit order meanWhat does merit order meanWhat does merit order meanWhat does merit order meanWhat does merit order meanWhat does merit order meanWhat does merit order meanWhat does merit order meanWhat does merit order meanWhat does merit order meanWhat does merit order meanWhat does merit order meanWhat does merit order meanWhat does merit order mean
Balancing services help maintain the frequency of the power grid by providing short-term energy or capacity reserves. They include balancing energy, which system operators use to maintain grid frequency, and balancing capacity, which providers agree to keep available. Different balancing services have varying activation speeds to respond to frequency deviations. Harmonization efforts in Europe are working to establish common balancing markets and platforms for cross-border exchange of reserves.
The Need for Enhanced Power System Modelling Techniques & Simulation Tools Power System Operation
The Need for Enhanced Power System Modelling Techniques & Simulation Tools The Need for Enhanced Power System Modelling Techniques The Need for Enhanced Power System Modelling Techniques & Simulation Tools The Need for Enhanced Power System Modelling Techniques & Simulation Tools & Simulation Tools
Power Quality Trends in the Transition to Carbon-Free Electrical Energy SystemPower System Operation
Power Quality
Trends in the Transition to
Carbon-Free Electrical Energy System Carbon-Free Electrical Energy SystemCarbon-Free Electrical Energy SystemCarbon-Free Electrical Energy SystemCarbon-Free Electrical Energy SystemCarbon-Free Electrical Energy SystemCarbon-Free Electrical Energy SystemCarbon-Free Electrical Energy SystemCarbon-Free Electrical Energy SystemCarbon-Free Electrical Energy SystemCarbon-Free Electrical Energy SystemCarbon-Free Electrical Energy SystemCarbon-Free Electrical Energy SystemCarbon-Free Electrical Energy SystemCarbon-Free Electrical Energy SystemCarbon-Free Electrical Energy SystemCarbon-Free Electrical Energy SystemCarbon-Free Electrical Energy SystemCarbon-Free Electrical Energy SystemCarbon-Free Electrical Energy SystemCarbon-Free Electrical Energy SystemCarbon-Free Electrical Energy SystemCarbon-Free Electrical Energy SystemCarbon-Free Electrical Energy SystemCarbon-Free Electrical Energy SystemCarbon-Free Electrical Energy SystemCarbon-Free Electrical Energy SystemCarbon-Free Electrical Energy SystemCarbon-Free Electrical Energy SystemCarbon-Free Electrical Energy SystemCarbon-Free Electrical Energy System
A Power Purchase Agreement (PPA) is a long-term contract between an electricity generator and purchaser that defines the conditions for the sale of electricity. PPAs provide price stability and help finance renewable energy projects by guaranteeing revenue. There are physical PPAs, which deliver electricity directly, and virtual PPAs, which financially settle the contract without physical delivery. PPAs benefit both renewable developers by enabling project financing, and buyers seeking long-term electricity price certainty and renewable attributes.
Harmonic study and analysis Harmonic study and analysisHarmonic study and analysisHarmonic study and analysisHarmonic study and analysisHarmonic study and analysisHarmonic study and analysisHarmonic study and analysisHarmonic study and analysisHarmonic study and analysisHarmonic study and analysisHarmonic study and analysisHarmonic study and analysisHarmonic study and analysisHarmonic study and analysisHarmonic study and analysisHarmonic study and analysisHarmonic study and analysisHarmonic study and analysisHarmonic study and analysisHarmonic study and analysisHarmonic study and analysisHarmonic study and analysisHarmonic study and analysisHarmonic study and analysisHarmonic study and analysisHarmonic study and analysisHarmonic study and analysisHarmonic study and analysisHarmonic study and analysisHarmonic study and analysisHarmonic study and analysisHarmonic study and analysisHarmonic study and analysisHarmonic study and analysisHarmonic study and analysisHarmonic study and analysisHarmonic study and analysisHarmonic study and analysisHarmonic study and analysisHarmonic study and analysisHarmonic study and analysisHarmonic study and analysisHarmonic study and analysisHarmonic study and analysisHarmonic study and analysisHarmonic study and analysisHarmonic study and analysisHarmonic study and analysisHarmonic study and analysisHarmonic study and analysisHarmonic study and analysisHarmonic study and analysis
What is leakage current testing What is leakage current testingWhat is leakage current testingWhat is leakage current testingWhat is leakage current testingWhat is leakage current testingWhat is leakage current testingWhat is leakage current testingWhat is leakage current testingWhat is leakage current testingWhat is leakage current testingWhat is leakage current testingWhat is leakage current testingWhat is leakage current testingWhat is leakage current testingWhat is leakage current testingWhat is leakage current testingWhat is leakage current testingWhat is leakage current testingWhat is leakage current testingWhat is leakage current testingWhat is leakage current testingWhat is leakage current testingWhat is leakage current testingWhat is leakage current testingWhat is leakage current testingWhat is leakage current testingWhat is leakage current testingWhat is leakage current testingWhat is leakage current testingWhat is leakage current testingWhat is leakage current testingWhat is leakage current testingWhat is leakage current testingWhat is leakage current testingWhat is leakage current testingWhat is leakage current testingWhat is leakage current testingWhat is leakage current testingWhat is leakage current testingWhat is leakage current testingWhat is leakage current testingWhat is leakage current testingWhat is leakage current testingWhat is leakage current testingWhat is leakage current testing
A review on techniques and modelling methodologies used for checking electrom...nooriasukmaningtyas
The proper function of the integrated circuit (IC) in an inhibiting electromagnetic environment has always been a serious concern throughout the decades of revolution in the world of electronics, from disjunct devices to today’s integrated circuit technology, where billions of transistors are combined on a single chip. The automotive industry and smart vehicles in particular, are confronting design issues such as being prone to electromagnetic interference (EMI). Electronic control devices calculate incorrect outputs because of EMI and sensors give misleading values which can prove fatal in case of automotives. In this paper, the authors have non exhaustively tried to review research work concerned with the investigation of EMI in ICs and prediction of this EMI using various modelling methodologies and measurement setups.
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECTjpsjournal1
The rivalry between prominent international actors for dominance over Central Asia's hydrocarbon
reserves and the ancient silk trade route, along with China's diplomatic endeavours in the area, has been
referred to as the "New Great Game." This research centres on the power struggle, considering
geopolitical, geostrategic, and geoeconomic variables. Topics including trade, political hegemony, oil
politics, and conventional and nontraditional security are all explored and explained by the researcher.
Using Mackinder's Heartland, Spykman Rimland, and Hegemonic Stability theories, examines China's role
in Central Asia. This study adheres to the empirical epistemological method and has taken care of
objectivity. This study analyze primary and secondary research documents critically to elaborate role of
china’s geo economic outreach in central Asian countries and its future prospect. China is thriving in trade,
pipeline politics, and winning states, according to this study, thanks to important instruments like the
Shanghai Cooperation Organisation and the Belt and Road Economic Initiative. According to this study,
China is seeing significant success in commerce, pipeline politics, and gaining influence on other
governments. This success may be attributed to the effective utilisation of key tools such as the Shanghai
Cooperation Organisation and the Belt and Road Economic Initiative.
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...IJECEIAES
Climate change's impact on the planet forced the United Nations and governments to promote green energies and electric transportation. The deployments of photovoltaic (PV) and electric vehicle (EV) systems gained stronger momentum due to their numerous advantages over fossil fuel types. The advantages go beyond sustainability to reach financial support and stability. The work in this paper introduces the hybrid system between PV and EV to support industrial and commercial plants. This paper covers the theoretical framework of the proposed hybrid system including the required equation to complete the cost analysis when PV and EV are present. In addition, the proposed design diagram which sets the priorities and requirements of the system is presented. The proposed approach allows setup to advance their power stability, especially during power outages. The presented information supports researchers and plant owners to complete the necessary analysis while promoting the deployment of clean energy. The result of a case study that represents a dairy milk farmer supports the theoretical works and highlights its advanced benefits to existing plants. The short return on investment of the proposed approach supports the paper's novelty approach for the sustainable electrical system. In addition, the proposed system allows for an isolated power setup without the need for a transmission line which enhances the safety of the electrical network
Embedded machine learning-based road conditions and driving behavior monitoringIJECEIAES
Car accident rates have increased in recent years, resulting in losses in human lives, properties, and other financial costs. An embedded machine learning-based system is developed to address this critical issue. The system can monitor road conditions, detect driving patterns, and identify aggressive driving behaviors. The system is based on neural networks trained on a comprehensive dataset of driving events, driving styles, and road conditions. The system effectively detects potential risks and helps mitigate the frequency and impact of accidents. The primary goal is to ensure the safety of drivers and vehicles. Collecting data involved gathering information on three key road events: normal street and normal drive, speed bumps, circular yellow speed bumps, and three aggressive driving actions: sudden start, sudden stop, and sudden entry. The gathered data is processed and analyzed using a machine learning system designed for limited power and memory devices. The developed system resulted in 91.9% accuracy, 93.6% precision, and 92% recall. The achieved inference time on an Arduino Nano 33 BLE Sense with a 32-bit CPU running at 64 MHz is 34 ms and requires 2.6 kB peak RAM and 139.9 kB program flash memory, making it suitable for resource-constrained embedded systems.
Understanding Inductive Bias in Machine LearningSUTEJAS
This presentation explores the concept of inductive bias in machine learning. It explains how algorithms come with built-in assumptions and preferences that guide the learning process. You'll learn about the different types of inductive bias and how they can impact the performance and generalizability of machine learning models.
The presentation also covers the positive and negative aspects of inductive bias, along with strategies for mitigating potential drawbacks. We'll explore examples of how bias manifests in algorithms like neural networks and decision trees.
By understanding inductive bias, you can gain valuable insights into how machine learning models work and make informed decisions when building and deploying them.
Comparative analysis between traditional aquaponics and reconstructed aquapon...bijceesjournal
The aquaponic system of planting is a method that does not require soil usage. It is a method that only needs water, fish, lava rocks (a substitute for soil), and plants. Aquaponic systems are sustainable and environmentally friendly. Its use not only helps to plant in small spaces but also helps reduce artificial chemical use and minimizes excess water use, as aquaponics consumes 90% less water than soil-based gardening. The study applied a descriptive and experimental design to assess and compare conventional and reconstructed aquaponic methods for reproducing tomatoes. The researchers created an observation checklist to determine the significant factors of the study. The study aims to determine the significant difference between traditional aquaponics and reconstructed aquaponics systems propagating tomatoes in terms of height, weight, girth, and number of fruits. The reconstructed aquaponics system’s higher growth yield results in a much more nourished crop than the traditional aquaponics system. It is superior in its number of fruits, height, weight, and girth measurement. Moreover, the reconstructed aquaponics system is proven to eliminate all the hindrances present in the traditional aquaponics system, which are overcrowding of fish, algae growth, pest problems, contaminated water, and dead fish.
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMSIJNSA Journal
The smart irrigation system represents an innovative approach to optimize water usage in agricultural and landscaping practices. The integration of cutting-edge technologies, including sensors, actuators, and data analysis, empowers this system to provide accurate monitoring and control of irrigation processes by leveraging real-time environmental conditions. The main objective of a smart irrigation system is to optimize water efficiency, minimize expenses, and foster the adoption of sustainable water management methods. This paper conducts a systematic risk assessment by exploring the key components/assets and their functionalities in the smart irrigation system. The crucial role of sensors in gathering data on soil moisture, weather patterns, and plant well-being is emphasized in this system. These sensors enable intelligent decision-making in irrigation scheduling and water distribution, leading to enhanced water efficiency and sustainable water management practices. Actuators enable automated control of irrigation devices, ensuring precise and targeted water delivery to plants. Additionally, the paper addresses the potential threat and vulnerabilities associated with smart irrigation systems. It discusses limitations of the system, such as power constraints and computational capabilities, and calculates the potential security risks. The paper suggests possible risk treatment methods for effective secure system operation. In conclusion, the paper emphasizes the significant benefits of implementing smart irrigation systems, including improved water conservation, increased crop yield, and reduced environmental impact. Additionally, based on the security analysis conducted, the paper recommends the implementation of countermeasures and security approaches to address vulnerabilities and ensure the integrity and reliability of the system. By incorporating these measures, smart irrigation technology can revolutionize water management practices in agriculture, promoting sustainability, resource efficiency, and safeguarding against potential security threats.
ACEP Magazine edition 4th launched on 05.06.2024Rahul
This document provides information about the third edition of the magazine "Sthapatya" published by the Association of Civil Engineers (Practicing) Aurangabad. It includes messages from current and past presidents of ACEP, memories and photos from past ACEP events, information on life time achievement awards given by ACEP, and a technical article on concrete maintenance, repairs and strengthening. The document highlights activities of ACEP and provides a technical educational article for members.
TIME DIVISION MULTIPLEXING TECHNIQUE FOR COMMUNICATION SYSTEMHODECEDSIET
Time Division Multiplexing (TDM) is a method of transmitting multiple signals over a single communication channel by dividing the signal into many segments, each having a very short duration of time. These time slots are then allocated to different data streams, allowing multiple signals to share the same transmission medium efficiently. TDM is widely used in telecommunications and data communication systems.
### How TDM Works
1. **Time Slots Allocation**: The core principle of TDM is to assign distinct time slots to each signal. During each time slot, the respective signal is transmitted, and then the process repeats cyclically. For example, if there are four signals to be transmitted, the TDM cycle will divide time into four slots, each assigned to one signal.
2. **Synchronization**: Synchronization is crucial in TDM systems to ensure that the signals are correctly aligned with their respective time slots. Both the transmitter and receiver must be synchronized to avoid any overlap or loss of data. This synchronization is typically maintained by a clock signal that ensures time slots are accurately aligned.
3. **Frame Structure**: TDM data is organized into frames, where each frame consists of a set of time slots. Each frame is repeated at regular intervals, ensuring continuous transmission of data streams. The frame structure helps in managing the data streams and maintaining the synchronization between the transmitter and receiver.
4. **Multiplexer and Demultiplexer**: At the transmitting end, a multiplexer combines multiple input signals into a single composite signal by assigning each signal to a specific time slot. At the receiving end, a demultiplexer separates the composite signal back into individual signals based on their respective time slots.
### Types of TDM
1. **Synchronous TDM**: In synchronous TDM, time slots are pre-assigned to each signal, regardless of whether the signal has data to transmit or not. This can lead to inefficiencies if some time slots remain empty due to the absence of data.
2. **Asynchronous TDM (or Statistical TDM)**: Asynchronous TDM addresses the inefficiencies of synchronous TDM by allocating time slots dynamically based on the presence of data. Time slots are assigned only when there is data to transmit, which optimizes the use of the communication channel.
### Applications of TDM
- **Telecommunications**: TDM is extensively used in telecommunication systems, such as in T1 and E1 lines, where multiple telephone calls are transmitted over a single line by assigning each call to a specific time slot.
- **Digital Audio and Video Broadcasting**: TDM is used in broadcasting systems to transmit multiple audio or video streams over a single channel, ensuring efficient use of bandwidth.
- **Computer Networks**: TDM is used in network protocols and systems to manage the transmission of data from multiple sources over a single network medium.
### Advantages of TDM
- **Efficient Use of Bandwidth**: TDM all
Literature Review Basics and Understanding Reference Management.pptxDr Ramhari Poudyal
Three-day training on academic research focuses on analytical tools at United Technical College, supported by the University Grant Commission, Nepal. 24-26 May 2024
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressionsVictor Morales
K8sGPT is a tool that analyzes and diagnoses Kubernetes clusters. This presentation was used to share the requirements and dependencies to deploy K8sGPT in a local environment.
Batteries -Introduction – Types of Batteries – discharging and charging of battery - characteristics of battery –battery rating- various tests on battery- – Primary battery: silver button cell- Secondary battery :Ni-Cd battery-modern battery: lithium ion battery-maintenance of batteries-choices of batteries for electric vehicle applications.
Fuel Cells: Introduction- importance and classification of fuel cells - description, principle, components, applications of fuel cells: H2-O2 fuel cell, alkaline fuel cell, molten carbonate fuel cell and direct methanol fuel cells.
2. Energy Strategy Reviews 29 (2020) 100482
2
P. Das et al.
Fig. 1. Present capacity mix and future RE targets of India [1,2].
Policy 2016 has proposed to increase solar RPO target from 3% to
8% in 2022 (excluding hydropower) [9]. Thus, with various central
and state initiatives, India is currently focusing strongly on renewable
energy sources and steady growth is expected which can overtake the
conventional generation capacity addition rate.
India’s present utility-scale installed power generating capacity is
around 364 GW with 63% share of fossil fuel based resources (Fig. 1).
Captive power generating capacity is around 58 GW which is mostly
constituted of coal-, gas-, and oil-based plants. In terms of generation,
total share of fossil fuel is still around 80% with RE contributing
around 9% (Fig. 2). With high RE integration targets, current gener-
ation mix will change considerably in the coming years. India’s RE
expansion plans are mainly constituted of solar and wind which are
variable sources of electricity. Additional variability associated with
these sources affects power system stability, reliability, and calls for
existing system to be more flexible. Flexibility is the ability of a power
system or resource(s) to respond reliably and rapidly to any changes in
operating conditions at various timescales [10–13].
Flexibility of a system resource can be understood in three dimen-
sions: range of power output (MW), speed of power output change
(MW/min), and duration of providing energy (MWh). A single resource
cannot always respond in these three different dimensions, and the
operators need to maintain a diverse portfolio of flexible components
for day-to-day balancing. Resources having wide range between maxi-
mum and minimum output can respond to a large range of variation,
while others having fast response time can damp any quick imbalance
within a short duration. Entities with the ability to deliver energy at
longer time span can provide flexibility to address disturbances for an
extended duration [11,12].
In light of increased RE penetration, ensuring system flexibility
requirements in multiple time scales is critical to combat additional
variability and uncertainty. Traditional power systems handle uncer-
tainty from demand and equipment outages using operating reserve,
contingency and security analysis. RE extends existing variability and
uncertainty in wide spatial and temporal scale, which necessitates
faster response from system resources. Though there is consensus on
the importance of flexibility with respect to increased RE penetration,
identification of appropriate technological options for a national en-
ergy system is still challenging. Techno-economic uncertainty of new
flexible resources like storage and their higher cost vis-a-vis existing
options (e.g., gas-fired plants), and inefficient planning methods are
main reason behind this.
For India, flexibility requirements are increasing with rising RE
expansion targets. The objectives of this article are to identify proper
technical options, policy mechanisms, and modeling approaches in the
Indian context to support system flexibility. Challenges faced by other
countries which have attained a high share of RE in their generation
portfolio are reviewed, and comparisons have been drawn to identify
strategies which could be used to mitigate the challenges in India.
The next section discusses the operation- and planning-related chal-
lenges associated with large-scale RE integration in Indian power sys-
tem. Section three identifies the suitability of different flexibility op-
tions in this regard. Section four highlights the need of new and
innovative policy mechanisms for flexible resources to integrate them
into the existing system structure. Limitations of current planning
methodologies have been outlined in Section five, along with pos-
sible improvement to identify flexible capacity. Finally, Section six
summarizes the findings and draws the conclusion.
2. Challenges with large-scale variable RE integration and its im-
plications
Large-scale integration of solar and wind energy would impact
both power system operation and planning strategies (Fig. 3). For a
developing country like India, both issues are equally relevant and need
to be understood in totality. In this section, these issues are highlighted
with emphasis on system flexibility.
2.1. Impact of large-scale RE integration on power system operation
There are three main challenges associated with solar and wind
energy integration; temporal variability, output uncertainty, and lo-
cation specificity [15]. Temporal variability of RE generation makes
the supply uncorrelated with demand pattern, thus creating system
management related challenges for operators. Uncertainty of output
from RE plants creates scheduling-related challenges as RE generation
forecasts deviate at real time of operation [16,17]. Finally, sudden
generation inrush from RE generators at high resource potential regions
creates localized grid congestion.
Due to policy obligation, RE generators are often operated in must-
run condition. Therefore, conventional generators serve the residual
or net load, which fluctuates widely due to the combined variability
from RE and demand. Conventional thermal generators (e.g., coal-fired
plants) have several operational constraints to be maintained for stable
operation. They cannot be shut down, started or frequently ramped up
and down due to concerns of efficiency degradation, carbon emission
increment, equipment deterioration, and lifetime reduction. They also
3. Energy Strategy Reviews 29 (2020) 100482
3
P. Das et al.
Fig. 2. India’s historical generation mix [14].
Fig. 3. Time-line of RE variability impact on power system.
cannot accommodate excess RE generation by lowering their output
beyond a certain limit. Therefore, these plants can only provide limited
flexibility support for short-term RE variability. Hydropower plants
with reservoir have high ramp rates and can help to mitigate system
variability, but environmental and irrigation constraints often restrict
their balancing capabilities. Network congestion due to insufficient
capacity or security regulations also restraints excess RE power to be
evacuated.
2.1.1. Renewable energy curtailment
Stable power system operation requires load and generation balance
at every point of time. At times of RE over-generation, inflexibility
of thermal generators and network security criteria may restrict full
utilization of available RE generation [18]. This intentional reduction
of generation from variable RE generators is referred to as RE curtail-
ment, which has operational as well as economic consequences [19].
It decreases the capacity factor of RE projects, increases payback time
and financing cost, and makes it challenging to meet greenhouse gas
emission targets [20].
In several countries, RE curtailment has been a problem associated
with large-scale RE integration. Levels of wind energy curtailment
experienced in the United States differ substantially by region and
utility. In Electric Reliability Council of Texas (ERCOT), 17% wind
energy curtailment was observed in 2009 which reduced to 4% in
2012 and 1.6% in 2013. Transmission inadequacy, oversupply, and
inefficient market design were the primary reasons in this case [21]. In
California Independent System Operator (CASIO), curtailment predom-
inantly occurs due to oversupply, generator ramping constraints, line
congestion, and must-run status of hydropower plants in spring. Here,
in early 2014, 19.39 GWh of wind curtailment was witnessed [20].
Bonneville Power Administration (BPA) reports around 2% wind cur-
tailment, mainly due to shortage of reserve capacity. Wind curtailment
level of 1%–4% in Midcontinent Independent System Operator (MISO)
and 1%–2% in Public Service Company of Colorado are usual [21].
In China, total curtailed wind power during 2010–2013 was around
60 TWh, with some provinces having around 30% curtailment rates in
2012. This was mainly caused due to limited transmission capacity and
mismatch between the generation and consumption profiles [22–25].
Curtailment rates of several European countries are low, despite hav-
ing significant RE penetration levels. Strongly interconnected network
and well-functioning international power market are the two primary
reasons here [25].
Generation curtailment is becoming a concern in India as well
with increasing solar and wind energy penetration. Countries like
USA, China, and Germany with better grid management protocols and
infrastructure witnessed substantial curtailment in near past, and a
similar scenario is likely to be repeated here if appropriate mitigation
strategies are not adopted. RE Curtailment has already been witnessed
in states like Rajasthan and Tamil Nadu due to inadequate transmission
capacity and unwillingness of distribution companies to buy costlier
RE power. In Tamil Nadu, solar PV plants currently face curtailment
up to 50%–100%, due to profile mismatch between generation and
4. Energy Strategy Reviews 29 (2020) 100482
4
P. Das et al.
Fig. 4. Wind and solar resource potential of India [26,27].
demand [28]. Other states like Telangana, Karnataka, Andhra Pradesh,
and Jharkhand face imminent curtailment challenges due to current PV
capacity expansion plans. Though inadequate transmission capacity is
often cited as the major cause for curtailment in India, other factors,
such as inflexibility of coal-based thermal generators, improper opera-
tion strategies, as well as planning protocols, are increasingly becoming
prominent [29].
2.2. Impact of large-scale RE integration on power system planning
Optimizing RE capacity, siting, timing, and planning progressive
introduction of flexible resources over a long time frame is essential for
national power system development. These tasks are usually performed
as a part of long-term planning to satisfy some policy interest. The
existing power system structure can handle certain quantum of vari-
ability and uncertainty from demand and unit outage using controllable
reserve (e.g., thermal power plants). An adjustment of the system oper-
ation protocol can only support up to a certain level of RE penetration.
With large-scale introduction of generation uncertainty and variability,
operational adjustment alone is not enough and significant investment
planning is required.
Location specificity of RE resources is one of the major planning re-
lated challenges. Good resource sites (high solar intensity, wind power
density), situated far away from load centers often create transmission
related challenges. In India, geographical distribution of solar and
wind resources are not uniform or spatially correlated with demand.
Solar potential is high in western states while wind potential is high
in western and southern coastal areas (Figs. 4a, 4b). High capacity
of inter-state and inter-regional transmission is therefore needed to
evacuate RE power to deficit areas. Solar and wind power plants require
less installation time than network infrastructure, as securing right of
way is a time-consuming process. Therefore, renewable power has to be
curtailed till the transmission infrastructure is fully developed. It is also
noteworthy that developing massive transmission corridor exclusively
for RE is often uneconomical, as it may be underutilized due to natural
variability or generation curtailment. A proper cost–benefit analysis
over a long time scale is therefore needed in such cases.
Operational flexibility can be harnessed from various sources, like
storage, interconnection, demand side response (DSR), and fast acting
generators. Recent improvements of wind turbines with continuously
flexible transmissions can also enable flexible operation [30,31]. Anal-
ysis is needed to assess the utility of these technological options under
different techno-economic scenarios [32]. These resources also need
innovative policy thrust to compete with existing ones. Effects of these
policies, along with technology learning, cost reduction potential, mar-
ket and social acceptability, etc. need to be understood in a long time
frame for optimal portfolio planning.
RE curtailment occurs due to operational inflexibility, but it has
planning related implications because development of flexible capacity
such as transmission corridors, storage, etc. has higher lead time than
renewable power plant installation. Though, curtailment is undesirable
from economic point of view, it provides system flexibility when other
measures are either unavailable or costly. On the other hand, allowing
curtailment would lead to overbuilding of RE capacity. On national
perspective, it could lead to a massive increase in effective cost of
energy supply which would be detrimental to its growth prospects.
Therefore, planning activities need to judge whether curtailment has
long-term positive or negative effect and decide its optimum allowable
level from system design perspective [33].
Planning for RE power plant siting is also important as geographical
aggregation of RE generators over a large area using electricity network
leads to significant statistical smoothing of fluctuations from individual
generators, reducing associated integration challenges [34]. Significant
planning related to siting of RE plants, erection of transmission lines,
coordination between area balancing authorities are needed in this
regard.
3. Flexibility options for India to support large-scale RE integra-
tion
Therefore, large-scale variable RE integration plans should be sup-
ported by suitable and adequate flexible capacity. Various flexibility
options have been deployed worldwide to mitigate this variability.
Similarly, for India, flexibility options for supporting RE integration
are diverse. In this section, only key options for India, e.g., flexible
generation, energy storage, interconnection, DSR, and improvements
of system operational practices are discussed.
5. Energy Strategy Reviews 29 (2020) 100482
5
P. Das et al.
3.1. Flexibility from supply side
3.1.1. Coal-fired plants
Coal-fired thermal generators dominate India’s power generation
portfolio. Though solar and wind power penetration would increase
in the future, coal-based thermal power plants would continue to
contribute significantly to the overall generation share. Therefore, the
plants have to be more flexible, with higher ramp rates and lower min-
imum generation limit. Most of these plants in India were installed to
ensure generation adequacy, rather than providing balancing support.
Though some retrofitted and new units are suitable for faster operation,
still the technical, economical, and policy-related challenges1
restrict
them to support large-scale resource variation, without compromising
on their performance and lifetime. Generation from these plants can
only be reduced up to 70% of rated capacity below which generally oil
support is needed. Use of oil is uneconomical, which restricts further
backing [35]. In India, minimum start-up time of coal-based generating
units is around 15–24 h and in case of week-ends start-up it can
go up to 2 days. This creates balancing challenges, leading to high
operating costs and restricting generator shut down. Some large central
generating stations are not used for balancing purpose (run at constant
output) as the states with sharing allocation2
avoid paying capacity
charge when using less capacity [35]. Recently, the ministry of power
has taken several steps for existing coal power plants’ operation and
future capacity expansions. Followings are some of the steps being
taken by the ministry of power regarding coal-based power plants along
with some recommendations.
1. The Central Electricity Regulatory Commission (CERC) has spec-
ified 55% of installed capacity as minimum load limit for central
and inter-state thermal generators3
[38].
2. All inefficient coal-based power plants older than 25 years are to
be replaced by modern super-critical units. They are more flexi-
ble than traditional ones and will offer better flexibility and part-
load efficiency. Centrally owned National Thermal Power Corpo-
ration is already phasing out its 11 GW capacity of old, ineffi-
cient plants within the next five years [39]. Ultra-super-critical
technology based plants are also progressively introduced into
the system [40].
3. Renovation and modernization of existing old thermal power
stations is continuously going on through retrofitting, regular in-
spections, and maintenance. These initiatives could increase the
efficiency, ramping and cycling ability of these plants [40,41].
4. Ideally, flexible coal-fired powered plants can have ramp rates
of 4–8%/min, 2–5 h start-up times, and minimum output limits
of 20%–40% of maximum rating [42]. In Denmark, coal-fired
plants have ramp rates up to 3%–4% of rated output per minute,
and they can cycle down to 10%–20% of maximum output. In
Germany, a stable operation limit of 45%–55% is common. Same
learning could be adopted in Indian case, especially for power
plants located in RE rich states.
5. Coal capacity addition in the future should focus on technologies
which can provide generation flexibility. Therefore, flexibility
standards need to be incorporated into the supply contract as
an additional criterion to develop a competitive market for
flexibility.
1
Various thermal plants in India have long-term power purchase agreement
with state DISCOMs which restricts their dynamic operation (e.g., frequent
start-up/down or ramping).
2
In India, power from the stations owned by the central government are
allocated to the states by certain rules [36].
3
A central or other generating station, in which two or more states have
shares [37].
3.1.2. Gas-fired plants
Gas-based power plants (e.g. combined cycle gas turbines) have high
ramp rates, lower start-up times, lower emissions, and lower generation
limits. Therefore, they can be utilized to support variable RE generation
as a flexible resource. Gas-based power plants are usually operated
during peak times (e.g., in the evening) for balancing purpose and
to provide ramping support [40]. But, most of the existing gas-based
plants in India are either lying idle or operating at reduced plant load
factor (PLF) due to fuel shortage (Fig. 5). Plans to increase gas imports
from neighboring countries are uncertain due to geopolitical reasons.
Recently, some initiatives are being taken by the government regarding
gas availability and enhancing capacity utilization of plants. Following
is a brief summary of that, along with some recommendations.
• Considering the ability of these generators to support system vari-
ability, there is a need to allocate more gas for power generation
and encourage building new gas-fired plants, especially in RE rich
states [35].
• Recently, the government of India has implemented a scheme to
revive and improve the capacity utilization of gas power plants.
• Supply of imported liquefied natural gas (LNG) is ensured to the
stranded gas power plants as well as plants receiving domestic
gas [40].
• With this initiative, India aims to increase the share of gas in
overall energy consumption in next three to four years (15% from
6.5% currently), which will lead to better utilization of existing
gas power plants [43].
• As this initiative is planned for short-term, sustainable long-term
plans are needed to ensure future gas availability for existing as
well as new capacity.
3.1.3. Hydro power plants
Hydro power plants with reservoir are suitable for supporting varia-
tions in residual demand, due to their high ramp rates and low start-up
and shut-down time. Apart from RE integration, hydro generators have
the ability to provide different ancillary services, such as load follow-
ing, reserve, regulation, thus supporting a secure and reliable power
system. But primary operational challenges with hydro plants in India
are their multi-purpose use (especially for irrigation) and large seasonal
water inflow variations, which cause low annual utilization. The must-
run status of hydro units in the rainy season also limits their flexible
dispatch and balancing ability [35]. India’s hydro power potential is
about 148.70 GW, of which 65% is yet to be developed (Fig. 6).
Increasing flexibility on the generation side is important for Indian
power sector. Modernization of existing coal-fired power plants, full
exploitation of the hydro energy potential and ensuring gas availability
are the key areas in this regard. Some steps have already been taken
towards coal and gas power plants’ performance improvement, though
environmental regulations need to be streamlined for faster clearance
for hydro power expansion [44].
3.2. Energy storage
Energy storage systems have emerged as attractive flexibility op-
tions to support RE integration and energy curtailment reduction [45].
On the generation side, storage can offer different services e.g., energy
time shifting, capacity firming,4
backup capacity, frequency regulation,
load following, voltage support, and black start to support RE integra-
tion. On the demand side also, storage is a key technology to support
DSR. Each energy storage system has unique characteristics suited to
different services (Table 1). Detailed technical characteristics of various
storage and their application areas are well documented [46–48].
4
Supplying energy to provide constant power output when RE generation
is below its rated power output.
6. Energy Strategy Reviews 29 (2020) 100482
6
P. Das et al.
Fig. 5. Historical gas supply position and plant load factors in India [40].
Fig. 6. Region-wise hydro potential and development status in India (GW) [40].
Table 1
Energy storage application areas [46,49].
Category Services Discharge time Storage technologies
Power quality System stability, transition
stability, frequency regulation
Seconds to minutes Flywheels, super capacitors,
lithium-ion, lead-acid
Bridging power Contingency reserve, ramping Minutes to one hour Lead acid, nickel–metal hydride,
nickel–cadmium, sodium sulfur,
and flow batteries
Energy management Energy arbitrage, load leveling,
transmission and distribution
capacity deferral, etc.
Hours to days Pumped hydro, compressed air
and battery storage technologies
like sodium sulfur, vanadium
redox, and zinc bromide
3.2.1. Pumped hydro energy storage system
In India, pumped hydro storage (PHS) constitutes the major portion
(95%) of current grid connected storage capacity (Fig. 7). Due to its
ability to provide peak power, balancing service, and RE integration
support, development of pumped storage plants is becoming relevant.
A decline of suitable sites for developing conventional hydro power
stations, a decrease in the water volume in rivers due to enhanced
upstream consumption are crucial motivations for PHS development.
7. Energy Strategy Reviews 29 (2020) 100482
7
P. Das et al.
Fig. 7. Current storage capacity distribution in India [50].
Out of 96,524 MW of PHS potential identified in India by the Cen-
tral Electricity Authority (CEA) at 63 sites, only nine schemes with
aggregate capacity of 4786 MW are currently in operation [42].
PHS plants in India are primarily used for energy arbitrage, i.e.,
utilizing cheap electricity during off-peak periods, to be used during
peak load to increase power plant utilization, thus improving the
economy of system operation. But due to growing demand, sufficient
surplus energy is unavailable, causing existing PHS plants to operate at
reduced capacity (50–60)% [51]. Also, several PHS schemes in India
face water scarcity due to irrigation demand [52]. Out of currently
running 9 PHS plants, only 5 with total capacity of 2600 MW are being
operated in pumping mode and the remaining 4 with a total capacity of
about 2200 MW are being operated as conventional hydro plants [42].
With increasing penetration of large-scale RE, the importance of
PHS is continuously increasing. CEA plans to expand the PHS ca-
pacity by additional 10 GW within the next 5–6 years [53]. Future
PHS capacity expansion planning needs an understanding of following
challenges:
1. Lack of surplus energy is primarily responsible for the slow
growth of PHS in India. This could be mitigated by coupling
PHS plants with large-scale RE farms. PHS units could store
surplus RE generation during off-peak periods and thus reduce
energy curtailment. Availability of pumping power at off-peak
will ensure better utilization and improve operating efficiency of
PHS [54]. So, PHS capacity expansion needs to be linked with
RE integration plans, and their co-development, especially in RE
rich states needs to be focused.
2. Reassessment of PHS capacity potential (the latest assessment
was done almost three decades ago) is needed in light of tech-
nological improvements (mines as reservoirs [55], sea water
PHS [56] etc.), changes in environmental regulations, etc. Some
identified PHS sites may have to be scrapped and new sites could
be found [57].
3. Present market structures and the regulatory framework do not
support adequate investment into PHS capacity. There is a need
to develop new market mechanism and tariff structures to incen-
tivize PHS capacity expansion.
4. Detailed system planning studies using improved tools are re-
quired to optimize PHS capacity expansion plans, which is yet to
be performed for India. The storage capacity calculated earlier
by some studies in this regard is not optimal as elaborated in
Section 5.
3.2.2. Other energy storage systems
The share of storage technologies other than pumped hydro is still
small in utility scale, with some installation of electro-chemical and
thermal storage systems [50]. There is a large market of battery-based
storage in India’s residential and commercial sector for power backup.
The Indian Energy Storage Alliance (IESA) has estimated over 70 GW
of energy storage (all type) opportunity in India by 2022, which is one
of the largest in the world. Out of 70 GW, over 35 GW is expected to
be deployed for new applications like RE integration, frequency regula-
tion, peak management, Transmission and distribution (T&D) capacity
deferral, diesel usage reduction, and electric vehicles [58]. There is
an increased interest in deploying electric vehicles (EV) with battery
storage in India. The National Electric Mobility Mission targets yearly
sales of 6–7 million hybrid and electric vehicles, and a cumulative sales
of 15–16 million of EV by 2020 [59]. Energy storage technologies such
as battery also has opportunities in RE integrated rural micro-grids.
Mainstreaming of storage technologies, such as flywheels or batter-
ies at utility scale needs suitable economic signals for their services.
The development of innovative market mechanisms is crucial in this
regard so that they capture storage benefits at single and multiple
timescales. Section 4 further discusses these issues. Other options like
hydrogen storage are still in the research and development stage. Signif-
icant technological innovation, commercialization, and infrastructural
investment will be required to integrate them at the system level.
3.3. Network interconnection
As discussed in Section 2, a robust and adequate electricity net-
work is the backbone of successful RE integration. System operational
flexibility can be imported or exported fast upon requirement via
transmission lines [60]. Thus, a strongly interconnected system reduces
the negative impacts of RE variability and thereby lowers the RE cur-
tailment rate [61]. India has five interconnected regional grids which
form one national synchronous network with 418,710 CKM (circuit
kilometers) of transmission lines (220 kV and above) and 927,783 MVA
of transformation capacity [62]. Development of India’s transmission
capacity is outlined in Fig. 8.
Issues like low voltage, frequency fluctuation, load shedding, high
distribution losses, etc. prevail in different parts of the country. De-
spite having surplus in several areas, power transfer to deficit areas
is severely restricted due to network congestion, which is a critical
issue for system operation in India. Congestion has a significant im-
pact on system reliability, security and power dispatch. Indian Energy
Exchange has reported a loss of 5.3 and 3.1 billion units (kWh) of
electricity in 2013–14 and 2014–15, respectively due to grid con-
gestion [63]. From an economic point of view, it is desirable that
transmission lines should not be under-utilized, while from the oper-
ational point of view, they should not be congested to prevent load
shedding or generation curtailment events. Congestion cannot be elim-
inated practically, but it can be mitigated to an extent by enhancing
network capacity, using distributed generation and reducing peak de-
mand. With higher penetration of RE in some states in India, congestion
is likely to increase, especially in the local grids to which they will
be connected. Ensuring sufficient inter and intra-regional transmission
capacity is, therefore, critical in those networks. Recent long-term
transmission expansion planning studies have put additional interest on
developing new transmission corridors for RE capacity expansion [64–
66]. Prospective inter-regional transmission corridor capacity up to
2034 is outlined in Fig. 9.
3.3.1. International power exchange and trading
Apart from intra-region transmission capacity development, interna-
tional power trading utilizing demand pattern differences with neigh-
boring countries could act as a source of flexibility. A prominent
example in this regard is the European international energy market.
At present, India trades electricity with Bangladesh, Bhutan, and Nepal
8. Energy Strategy Reviews 29 (2020) 100482
8
P. Das et al.
Fig. 8. India’s transmission line length and power transformation capacity.
Fig. 9. Prospective inter-regional transmission corridor capacity [66].
under bilateral Memorandum of Understanding/Power Trade Agree-
ments (Table 2). International cooperation in the field of electricity has
positive consequences for South Asian countries (Fig. 10), as follows,
• Better utilization of the region’s existing hydro resources, e.g., in
Nepal and Bhutan, which in turn will decrease electricity supply
cost [68,69].
• Increased system reliability and flexibility from diversified cross-
country generation options, and reserve sharing via an intercon-
nected network [70].
• Reduced challenges of system balancing associated with variable
RE (wind, solar) [70,71].
Fig. 10. South Asia region [67].
• Carbon emission reduction by utilizing clean generating options
(hydro, solar, wind, natural gas).
Noting these benefits, the ‘SAARC Framework Agreement for Energy
Cooperation (Electricity)’ was signed in the 18th SAARC (South Asian
Association for Regional Cooperation) Summit. This comprises the joint
development of infrastructures and operating protocols (scheduling,
dispatch, energy accounting, and settlement) for secure and reliable
cross-border trade.
Cross border transmission capacity need can be high to change gen-
eration portfolio and emission intensity of participating countries [70].
Geopolitical issues and differences in regulatory and operational proto-
cols are major bottlenecks to develop a functional South Asian power
grid. Formation of nodal authority to resolve power trading and dis-
putes, coordinated planning and operation, and open access of power
transfer are the key areas that need attention [72,73].
9. Energy Strategy Reviews 29 (2020) 100482
9
P. Das et al.
Table 2
Cross border power trading: Current and future plans [65].
Countries Current connections Under construction Future connections
India–Bhutan 1500 MW power from Bhutan to
India from hydro projects
Power evacuation facilities for
hydro projects (2940 MW)
Project-wise transmission system
for ten hydro projects (11 GW) is
being taken up progressively
India–Bangladesh 500 MW power from India to
Bangladesh
Strengthening of existing
connection to by additional 500
MW by 2017
Phase I: New connection for
transmitting 500 MW power to
Bangladesh. Phase II: Increase
capacity to 1000 MW
India–Nepal 320 MW power from India to
Nepal
Additional power of about 100
MW from India to Nepal
Eleven connectors for power
transfer from Nepal to India
depending on hydro project
development (17.5 GW) and
surplus power availability
India–Myanmar 2–3 MW power India to
Myanmar.
– –
3.4. Demand side response and smart grid
Demand side response (DSR) is an effective mechanism to mitigate
challenges associated with variable RE sources by joint participation
of customer and utility. It is the intentional change in electric usage
by end-use customers from their normal consumption pattern (timing,
level of instantaneous demand or total power consumption) in response
to the changes in the electricity price or other incentives provided
by utility. Maintaining system reliability is the major objective of
DSR [74]. Incentive-based DSR programs include direct load control,
load curtailment, and demand side bidding, while price-based mech-
anisms include time of use tariff, critical peak pricing, and real-time
pricing [75,76].
DSR improves the management of renewable generation fluctua-
tions. It reduces system operating cost and facilitates higher RE pen-
etration than conventional generators. It can improve reliability by
providing flexible services such as ramping and reduce instances of
operating conventional generators at part loads. As DSR helps to miti-
gate RE fluctuations locally, it reduces the dependency on importing
or exporting power to/from another region via transmission lines,
which may be costly [77]. Another advantage of DSR is energy time
shifting, which allows demand increase during periods of excessive RE
generation, thereby reducing curtailment [78].
There is enormous potential of DSR in India, which could be ef-
fectively utilized to enhance RE integration. Only small initiatives
have been taken in this regard till date. DSR is practiced only for
large industrial and commercial consumers in the form of time-of-
day tariff, and incentives based on power and load factors. Other
sectors like commercial, domestic, railways, agriculture, and small-
scale industries are outside the domain of DSR. The focus of DSR in
India is peak load reduction rather than balancing. Main constraints
to non-implementation of system wide DSR in India are a lack of
proper metering infrastructure, awareness, existence of regulated en-
vironment, priority of generation adequacy over quality, political and
social obligations, and the poor financial status of state owned distribu-
tion companies [79,80]. Some private utilities (Tata Power Company
Distribution in Delhi and Mumbai) have implemented DSR programs
for commercial and industrial consumers [81].
Effective communication between the power utility and consumer
is crucial for DSR implementation. Advance monitoring and communi-
cation equipment are critical to this. Smart grids can intelligently inte-
grate the behavior and actions of generators as well as customers [82,
83]. Apart from that, it can also utilize the flexibility of demand-side
storage, such as electric vehicles (EV), to ensure efficient, sustainable,
economic, and secure electricity supply [84]. Smart grid development
in India is taking shape through various government initiatives. The
Ministry of Power took early steps in 2010 by constituting the India
Smart Grid Task Force and the India Smart Grid Forum. Development
of advanced metering infrastructure, data management, application of
GIS (Geographical Information System), enterprise asset management,
distribution automation, and customer relationship management are
some focus areas in this regard [85]. Several smart grid projects have
been set up around the country.
3.5. Improvement in system operation protocol
In the Indian power system, there is ample scope to improve flexibil-
ity by just adopting better operational practices or codes. A substantial
gain in the ability to handle system’s variability can be achieved
by better RE and demand forecasting techniques, smaller balancing
intervals, and wider balancing areas. These institutional changes can
be the least cost flexibility options, as compared to other resources.
3.5.1. Modifying system scheduling and balancing protocol
In real time, power system operators regularly check for system
balance and security. They assign re-dispatch needed in the already
scheduled generators or bring on-line fast reserves to avoid any system
imbalance, which may lead to instability and system failure. The sys-
tem’s balancing interval depends on the quality of available resource,
uncertainty level, manpower, and infrastructures. Making scheduling
and dispatch decisions closer to real time (shorter time duration)
significantly reduces uncertainty as it allows the grid to respond rapidly
to changes in supply from variable renewables. It also helps to clearly
identify the system’s flexibility requirement at different points in time,
which leads to lower operation cost. A faster scheduling and balancing
protocol provides a better alignment of the system operation with the
timescale of RE resources variability, thus enabling better utilization
of generation forecasts and reducing RE curtailment. In India, day-
ahead scheduling and intra-day dispatch of generators occurs at fifteen
minutes intervals. Improvements in this case needs to be judged in view
of feasibility of infrastructural and regulatory changes.
Similar to the faster balancing protocol, larger control areas or
better co-ordination between multiple balancing authorities reduces
operational uncertainty. Normally, the controlling authority of a bal-
ancing area maintains the supply and demand balance within its own
geographic boundary, with limited imports and exports. A single wider
balancing area can better address geographical diversity of the system
resources having RE generators. Coordination between multiple areas
offers the opportunity to share reserves, which allows operating less
reserve capacity and lowering costs. Apart from sharing reserves in real
time, joint unit scheduling, dispatch and balancing operations are pos-
sible through better coordination. This lowers other ancillary service
requirement, reduces RE curtailment and overall cost [86]. In India,
scheduling and balancing operations are often done independently. For
example, an SLDC (state load dispatch center) which is responsible to
schedule its own system assets, does not have the authority over the
grid or resources of neighboring states. Thus, it often schedules higher
reserve capacity, which may be procured from neighboring states at
10. Energy Strategy Reviews 29 (2020) 100482
10
P. Das et al.
lower cost. RLDCs (regional load dispatch centers) and the NLDC
(National Load Dispatch Center) further check the SLDC schedules and
commit centrally owned generators. But, they do not improve the SLDC
schedules in view of area coordination. Therefore, there is a need for
either a single national-level balancing authority to manage entire grid
or increase autonomy of SLDCs so that they can coordinate with each
other for economic system operation.
3.5.2. Accurate weather forecasting
Due to variability of RE generation and demand, system opera-
tors rely on their forecasted values to schedule conventional generat-
ing assets. While day-ahead forecasts are used for unit commitment,
short-term forecasts are used for schedule correction and calling other
mitigating options like demand response or storage. Accurate forecast-
ing can reduce the negative effects of RE variability and uncertainty
on system operation. Due to low forecast errors, dispatch of non-
RE generators need not deviate drastically from their schedules. This
could effectively increase system flexibility, reliability, and significantly
reduce RE curtailment either due to limited availability of ramping
resource or network congestion [87]. Accurate information could be
provided to RE generators in day ahead operation through improved
forecasting, thus enhancing their economic returns from electricity
market [21].
Countries like the USA, Germany, and Denmark use highly accurate
wind or solar generation prediction techniques. In India, forecast errors
in the range of 20%–30% of rated output is observed [35]. CERC
mandates all wind generators having an installed capacity of over
10 MW and connected at the transmission level of 33 kV and above
to forecast their generation with at least 70% accuracy. For actual
generation beyond +∕−30% of the scheduled value, the concerned
generator has to bear penalty [88]. This 30% error band needs to be
lowered further to minimize variability from renewable generation. It
is also vital that accurate forecasting be incentivized appropriately. In
the USA, electricity market operators are working with National Center
for Atmospheric Research to improve their forecasting. In India, State
and Regional load dispatch centers can collaborate with the Indian
Meteorological Department, and Indian Space Research Organization
to improve solar and wind forecasting.
4. Policy and regulatory support required for flexible resources in
India
RE integrating technologies providing faster flexibility response,
such as rapid generation, flexible demand, storage, and interconnec-
tions, involve high operational and investment costs. Due to costly
economic attributes of these technologies, it would be difficult for
them to compete with conventional options to provide such support.
Separate regulatory provisions are required for appropriate economic
incentives to service providers offering flexibility. Considering the in-
creasing valuation of system flexibility in recent years, policy makers
need to focus on the development of corresponding regulations and
policy frameworks in this nascent segment [89]. Operational flexibility
requirements in shorter time frames could be met reliably with the
support of long-term advance planning of their procurement to ensure
adequate availability of flexible resources. Countries world-wide are
in the process of adopting various regulations to ensure fulfillment of
flexibility requirement over the short term by its procurement over a
longer term.
4.1. Short-term operational flexibility regulations
Short-term operational flexibility requires that supply and demand
fluctuations should be met on a daily, hourly, sub-hourly, or real
time basis. Such flexibility could be obtained through ancillary ser-
vices, which help to enhance operation reliability and grid stability.
Procurement of ancillary services, like operational reserves, voltage
and frequency regulation, reactive power requirements, and black start
capability, could be done through specifically designed market mech-
anisms. Such mechanisms are presently operational in several power
markets, including PJM (Pennsylvania New Jersey Maryland Intercon-
nection), NYISO (New York Independent System Operator), ERCOT,
UK, CAISO, Nordpool, and India [90,91]. System operators procure
various forms of ancillary services to maintain grid balance. These
could be obtained from both the demand and supply sides, through
auction based Ancillary Services Market (ASM) or by direct mandate.
Examples of ASM include CAISO, AEMO (Australian Energy Market
Operator), NYISO, UK, and Nordic markets.
In India, a multilateral coordinated scheduling framework is
adopted over long to short term, to meet real-time energy requirements
as outlined in Fig. 11. As per Electricity Act 2003, Regional and State
Load Dispatch Centers (RLDCs/SLDCs) are responsible for optimum
scheduling and dispatch of electricity from state and inter-state gen-
erating stations (ISGS) considering forecasted demand of their regions.
Depending upon its requirement, each SLDC carries out a local cost
optimization from the entitled generating stations based on merit order
dispatch. Apart from power transactions through long-term Power
Purchase Agreements (PPA), states fulfill their electricity demand in
short term through sub-yearly contracts. This is done via bilateral
transactions through Inter-State trading licensees, Power Exchanges,
and Deviation Settlement Mechanism (DSM) [92].
Given the coordinated multilateral scheduling model in India, there
is a need for thin layer of optimization at the inter-state level duly
factoring technical constraints for residual balancing of demand for real
power with supply in real time. This residual balancing, after energy
markets are closed (gate closure), is managed by the system operators
through ancillary service markets to maintain grid frequency at its
nominal value, without compromising grid stability [93].
Increasing shares of variable renewable energy in the Indian power
system have led to the initiation of ancillary services market since
2015 [91,94]. Based on collective load forecasts for the next day,
the system operator procures ancillary services to support tertiary
frequency control (few minutes) in terms of the Reserve Regulation
Ancillary Services (RRAS) [94]. RRAS utilizes un-requisitioned5
gen-
eration surplus based on merit order stack of variable cost of all RRAS
providers. Individual up and down regulation requirements are assessed
based on consistent grid frequency conditions over 5 min, where only
generators can participate [91].
Under tertiary frequency control, the real-time flexibility require-
ment for imbalance settlement in the Indian grid is regulated under the
Availability Based Tariff (ABT) mechanism [95]. This mechanism in-
cludes frequency linked incentives/penalties for beneficiaries/suppliers
committing an Unscheduled Interchange (UI) of power [94]. UI gets
reflected as a charge on supply and consumption differing from the
defined schedule, and depends on temporal grid frequency conditions.
This embeds the compensation for frequency control, with ex-ante
pricing structures. Since 2014, this is called the Deviation Settlement
Mechanism (DSM). This is an evolving regulation with the frequency
band narrowing down to 49.7–50.05 Hz, and stronger restrictions
on defaulting entities [96]. Secondary control, i.e. Automatic Gener-
ation Control (AGC), is absent by design in the Indian grid. Primary
frequency control (in 2–5 s time frame) is achieved by regulatory man-
dates on all generating units above 200 MWs, to operate on restricted
governor mode as per IEGC-2010 [94].
To help the stakeholders manage their energy portfolio closer to
real time, discussion papers have been floated on ‘Real Time Energy
Market’ and ‘Re-designing Ancillary Services Mechanism in India’, by
CERC. The proposed co-optimization framework of energy and ancillary
services is intended to optimally utilize least-cost generation resources.
5
Un-requisitioned surplus (URS) is energy surplus available to some ISGS
if the total requisition from generators is lower than the total entitlement.
11. Energy Strategy Reviews 29 (2020) 100482
11
P. Das et al.
Fig. 11. Indian power system scheduling timeline.
Development of fully operational frameworks would take time. As of
now, system cost optimization is obtained through regional operational
coordination by Security Constrained Economic Dispatch (SCED) as a
mandatory procedure for ISGS on pan-India basis [97].
Traditionally, procurement of ancillary services ensures sufficient
online generation to meet forecasted demand under merit order-based
market clearing. This does not explicitly value short-term operational
flexibility, which is helpful for dynamic matching of demand and
supply [98]. Contemporary grid flexibility requirements could only be
met by deployment of fast response resources, such as energy storage
and flexible consumption. Separate regulatory provisions or market
products are required to incentivize and encourage participation of
these costly technologies.
Developed markets elsewhere are introducing commercial prod-
ucts explicitly designed to bring in rapid flexibility services in the
grid. These commercial products include Flexible Ramping Product
(CAISO), Short-Term Operating Reserves (UK), Fast Frequency regula-
tion Markets (PJM, UK, NYISO), Fast Reserves (UK, NYISO), and Energy
Imbalance Markets (ERCOT) [99–102]. These market products offer
payments for flexible resources for their ability to provide controlled
rapid variations. This encourages faster resource services to survive in
the market, as compared to slower ones.
In addition, markets with shorter trading intervals are emerging
to reduce imbalance quantity. The trading interval of CAISO’s Energy
Imbalance Market (EIM) was reduced to five minutes, while the trading
interval in India has evolved from 1 h to 15-min time blocks [102,103].
Regulatory provisions also need to focus on area balancing for
trading residual power between connected areas to enhance grid relia-
bility and improve system flexibility. This helps to enlarge the system
resource portfolio in an economical way [104]. CAISO’s EIM permits
participating area balancing authorities to trade residual power among
existing balancing areas to satisfy demand of each area [102]. Wider
network interconnections are evolving to connect several countries,
e.g., Synchronous Grid of Continental Europe, Central American In-
terconnection System (SIEPAC) and Association of Southeast Asian
Nations (ASEAN) [105]. Technical and legal arrangements for such
flexibility enhancing interconnection are still evolving.
Flexible resources, such as storage and demand response (DR),
have significant implementation costs due tothe requirements for smart
control and management and advanced infrastructure. Therefore, ap-
propriate economic signals, policies, and regulations are required to
develop such smart infrastructure. Further, retail market designs are
evolving to increase participation from large as well as small con-
sumers to encourage demand side energy management. Aggregation
can also offer an opportunity to exploit the flexibility potential of
smaller consumers.
4.2. Long-term flexibility planning regulations
Capacity assurance from flexible resources is essential to avoid
failures from demand and supply imbalance at real time. An optimal
planning for such capacity can restrict low reliability and high cost
events occurring due to last minute resource procurement. A capac-
ity procurement mechanism should be designed to provide a certain
stream of revenue to attract capacity providers capable of supply-
ing appropriate services to fulfill grid requirements. System operators
need to maintain additional capacity in standby mode to balance the
grid for safe operation and for rapid system adjustment/rescheduling.
Hence, offering payments for capacity, in addition to energy payments
would incentivize their providers to stay in business. Capacity assur-
ance is incentivized across the globe through various models based on
obligations, mandates or auction based markets.
In the Indian power sector, capacity payments are reflective of
fixed cost components in long-term Power Purchase Agreements (PPA)
for electricity providers or generators. Capacity payments have been
inherited as one of the components of the two-part tariff structure under
ABT as ‘Capacity Charge’. These charges are recovered annually based
on a target availability of the plant, i.e., 100% capacity charges can be
recovered for plant availability up to 85% . However, to encourage gen-
erators to maximize their energy sale, an incentive is offered based on
the actual achievement of generation based upon PLF above the target
availability [106]. But, there is no provision for capacity payments for
generators trading in power exchanges.
Existing capacity payment models focus on ensuring sufficient on-
line capacity, which may lack flexibility to handle short-term im-
balances. Flexibility is an emerging need of the future grid domi-
nated by variable renewable energy (VRE) generation. Merely keep-
ing online capacity, without considering capability of dynamically
matching demand with supply will no longer serve actual system re-
quirements [107]. Flexible capacity (storage, demand response, etc.) is
costlier and cannot compete with conventional capacities when markets
are dispatched based on the merit order. Instead, procurement of
12. Energy Strategy Reviews 29 (2020) 100482
12
P. Das et al.
capable resources necessitates a proper market design. This would help
to ensure that resources are remunerated based on their capabilities
to provide the necessary flexibility range based on actual grid require-
ments [108]. Hence, different kind of capacity payments or market
designs are required, which may reflect the need for specific flexible
capabilities on a long-term investment time scale.
Learning from the presently emerging practices being adopted
world-wide, India requires a policy environment to enable a wider vari-
ety of tools. This would help to attain grid flexibility through regulatory
mechanisms, policy directions, economic signals, and market design
to meet large renewable targets. Presently, India is emerging from a
centrally regulated structure, where 93% of power transactions are
performed through long-term power purchase agreements and only 7%
power is traded competitively through exchanges. Therefore, a blanket
adoption of mechanisms of developed markets may not work well for
India. The current regulatory framework for ancillary services in India
provides RRAS, which primarily targets to enhance the reserve margin.
The framework currently ignores the role of fast response technologies,
especially those which can be supported by capacitors, flywheels,
battery storage systems, etc. Also, current capacity procurement mech-
anisms adopted in India are not capable to support flexible system
development, and they should recognize the quality of technologies
that enhance system flexibility.
5. Revision of modeling practices needed in India for flexible
system planning
In light of additional dynamics and variability from RE, system
resource capacity simultaneously needs to be adequate and flexible
to manage supply and demand variability (discussed in Section 2).
It requires modifying system planning practices currently in India. In
this section, first, an outline of various types of energy and power
system planning activities is presented, followed by their limitations.
Some plausible approaches to improve the present paradigm are then
proposed.
5.1. Current system planning practices in India
In India, power system planning approaches related to renewable
energy integration are diverse. A wide range of models/tools are being
used by utilities and national-scale planners to handle various chal-
lenges. Power utilities typically use integrated resource optimization
models for network as well as generation expansion planning. These
models aim to identify least-cost reliable capacity expansion options,
their location, required investment, associated emission as well as
retirement schedule of existing assets. In India, CEA is responsible
for overall power sector planning activities. In their planning activi-
ties they utilize commercial modeling tools like EGEAS for planning
power system expansions [40]. On the other hand, various energy sys-
tem planning authorities in the government (e.g., NITI Ayog, Ministry
of Environment, Forest and Climate Change), academia and research
institutions use integrated assessment models or econometric mod-
els to design pathway(s) for meeting certain policy goal(s). Some of
the widely used modeling framework used by these authorities are
MARKAL, TIMES, MESSAGE, LEAP, GCAM, etc. Outputs of energy sys-
tem models are similar to integrated resource optimization models, but
their reach extends beyond the power sector only, i.e. they can interact
with other non-electricity sectors while designing a future portfolio.
The power sector is represented within these models endogenously and
is affected by the dynamics of other energy sectors.
Apart from capacity expansion models, several short-term models
such as production cost, network reliability, optimal power flow, etc.
are used for planning purposes by utilities and research institutions.
Production cost modeling tools allow a detailed representation of sys-
tem operational constraints and can optimize day-to-day generator
scheduling and dispatch. These kinds of models are primarily used
by research organizations. Detailed simulations of the transmission
network, including contingency events, are performed by power flow
and network security models. They are widely used by regional load
dispatch centers, state/regional and national power transmission utili-
ties. Though these models do not quantify future capacity, they give
an indication of system performance. Planning using these models
involves analyzing multiple portfolio scenarios by drawing capacity and
techno-economic assumptions, either from separate expansion plan-
ning model or by forecasting, and choosing the best based on expert
knowledge [109] (Figs. 12, 13).
5.2. Limitations and challenges in current modeling approaches in India
Consideration of system dynamics in a detailed temporal and spatial
resolution framework is crucial to reflect the RE variability impact in
planning studies [110,111]. The modeling frameworks used in India
have certain limitations in this regard.
The core focus of energy system models is not to optimize gener-
ator scheduling or dispatch; rather their strength lies in chronological
investment planning over a long-term horizon. These models focus on
resource adequacy, ignoring operational details associated with power
plants or transmission units. They do not usually track the effect of
spatial or temporal variation of RE resource on power flow and network
congestion [10,112,113]. Operational constraints on generators, trans-
mission line, etc., are often ignored, or their representation becomes
unrealistic due to limited temporal and spatial resolution in these
models. Modeling in absence of operational constraints in low temporal
and spatial resolution can lead to overestimation of system capability
to assimilate RE, underestimation of operational costs and flexibility
requirement [114–118].
Power sector operational models have limited applicability for long-
term optimization due to computational complexity. In general, power
sector specific planning models can analyze the operational aspect
and RE resource variability with higher resolution, as compared to
energy system models. But they have limited planning horizon and do
not consider interactions with other energy sectors (non-electricity).
Thus, these models are not very useful for national level energy policy
analysis (e.g., national carbon emission reduction targets) [119].
Due to these factors, traditional long-term planning approaches
employed in India fail to consider short-term RE variability and un-
certainty. Analysis of flexibility options to integrate renewable energy
in future scenarios were out of the scope of earlier studies [120–124].
Therefore, the system portfolio reported by these exercises correspond-
ing to future large scale RE expansion plans is often unrealistic. It is
not guaranteed that the system’s resources planned by these models
could be operated in a flexible and reliable manner in real time. As the
variable renewable sources would play a major role in future generation
portfolio, a major revision of the current planning methodologies is
required.
5.3. Modeling modification required
An improvement of traditional planning approaches can be achieved
in various ways, like direct inclusion of operational constraints, adopt-
ing higher temporal and spatial resolution in planning models and
linking planning and operational models [125,126]. Recently, several
attempts have been made to utilize bi-directional hybrid modeling
frameworks for long-term RE integration planning [127–130]. In the
Indian context, there are various possibilities of modeling related en-
hancements. Some recent studies in India have started to look into
these avenues such as using high resolution production cost models,
representing some operational aspects in planning models etc. [131–
134]. Following is a brief outline of some hybrid modeling approaches
which future studies in India may consider for long-term power sector
planning to ensure system flexibility.
13. Energy Strategy Reviews 29 (2020) 100482
13
P. Das et al.
Fig. 12. Traditional planning approaches.
Fig. 13. Unidirectional model linking approach.
Fig. 14. Bi-directional model linking approach.
5.3.1. Hybrid modeling approaches
• Hybrid approaches, involving power sector operational and en-
ergy system models in an iterative framework via bi-directional
data exchange, can be a major improvement in long-term plan-
ning paradigm in the Indian context. In this method, an
operational-scale model checks the suitability of a system portfo-
lio designed by the long-term model, by simulating unit commit-
ment and dispatch. Then, it returns operational-scale information
(e.g., RE curtailment factor, role of storage) back to a system
model, which then reruns the optimization and attempts new
solutions (Fig. 14).
• Operational models can be further used in connection with
geospatial tools to develop realistic supply curves of RE sources,
considering grid integration cost. The integration cost includes
grid infrastructure related cost (new transmission network), pro-
file cost (due to reduced full load operating hours of the thermal
generator, additional ramping requirement, and curtailment),
and balancing cost (additional cycling of conventional genera-
tors) [15,135]. The supply curve reflecting integration cost can
be utilized by long-term models to consider the impact of RE
resource variability in system planning [136].
6. Discussions and conclusions
Large-scale grid integration plans of solar and wind energy are
changing the paradigm of traditional operation and planning of the
Indian power system. The negative impacts are being witnessed in the
form of operational complexities and generation curtailment in several
states across India. With high penetration target already set, these
problems will enhance in the future. Thus, it is becoming necessary
to bring additional flexibility into the system portfolio to maintain
reliability, stability and security. This paper tries to identify suitable
technological options from where flexibility can be procured. Along-
side, it also recognizes different policy and regulatory mechanisms to
encourage flexible capacity development as well as system operation.
14. Energy Strategy Reviews 29 (2020) 100482
14
P. Das et al.
Finally, it points out newer planning and modeling approaches to
optimize long-term system portfolio focusing on flexibility need.
For increasing flexibility in the Indian power system, areas that
require immediate attention include rapid exploitation of hydro and
pumped hydro storage potential, retrofitting existing coal-fired power
plants, and developing adequate transmission infrastructure. An im-
proved system operation protocol, such as better area coordination,
and accurate RE generation forecasting should also be the interest areas
which can significantly enhance flexibility within minimum time and
cost. Fresh additions of firm capacity (e.g., coal-based plants) need to
have higher part-load efficiency, ramp rates, and lower start-up time.
With adequate regulatory support in place, DSR and energy storage
system both on the supply and demand sides (e.g., MW scale battery,
and EV) can turn out to be attractive flexibility options in the long
term to mitigate large scale RE fluctuations. Recent initiatives to revive
the stranded gas power plants will help to cater some part of the
flexibility need. Though gas availability is uncertain in the long term,
continuation of adequate gas supply to the plants especially in RE rich
states will be key to handle grid-balancing related issues.
Despite a consensus on additional system flexibility needs for in-
creasing RE penetration, issues of countries like India are unique.
Aiming for a highly flexible system involves high infrastructure in-
vestment, which can significantly increase power supply cost. This
may, in turn, hinder achieving sustainable development related goals.
Assessment of incremental cost for transitioning into a flexible system
scenario needs to be undertaken thoroughly. The role of suitable policy
and market mechanisms are critical in this regard to balance the aims
of social welfare maximization and new RE investment encouragement.
In India, regulatory provisions need to be developed to enable existing
resources for flexible operation and promote new flexible resources
such as storage to become mainstream. For that, newer policies should
value system resource for their service quality in addition to their
capacity. Further, power system deregulation, political consensus and
infrastructural adequacy can open opportunities to adopt a robust
market structure to attract investment for flexible capacity.
Short-term operational flexibility regulations should acquire ancil-
lary services through market mechanisms on the demand and supply
sides. New robust market products should be designed to bring rapid
flexibility for system operation. This may include new mechanisms for
trading residual power between multiple grids over a market platform.
Energy storage and geographical aggregation of small balancing areas
are the essential ingredients of any future operational planning. In
the longer term, generation capacity including storage procured by
different mechanisms should provide flexibility through obligations,
mandates or auction-based markets. For that, capacity market designs
need to be modeled according to country’s specific needs. Overall,
a broader policy environment is required to maintain grid flexibil-
ity through regulation, policy directions, and market types such that
emerging flexible resources like DSR, storage, etc., get proper economic
signals for investment.
Apart from infrastructure and policy related bottlenecks associated
with flexible system development, methodological challenges also need
equal attention. Designing a long-term flexible system portfolio requires
operational-scale information to be considered in planning models.
Earlier national-level studies in India are weak in this regard. Improved
modeling and planning approaches are therefore necessary to design
new energy policies and identify an optimal flexible system portfolio.
Traditional approaches/models used earlier for this purpose need to
consider the importance of different sector specific models and their
interlinking.
Thus, the development of a flexible system in India needs to con-
sider several factors. System flexibility, which is available in the current
power system portfolio but under-utilized, should be harnessed prop-
erly. Flexibility needs will vary from state to state according to existing
infrastructure, future economic development plans, availability of en-
ergy resources, and RE capacity development. Therefore, national-scale
planning studies using granular models having state-level details are
necessary to optimize future system design. National level planners,
power system operators, regulatory authority, and academics should
coordinate more to develop efficient tools and algorithms, advanced
data maintenance, and management practices in this regard.
Declaration of competing interest
The authors declare that they have no known competing finan-
cial interests or personal relationships that could have appeared to
influence the work reported in this paper.
CRediT authorship contribution statement
Partha Das: Conceptualization, Writing - original draft, Visualiza-
tion, Methodology, Investigation, Writing - review & editing. Parul
Mathuria: Writing - original draft, Visualization. Rohit Bhakar: Writ-
ing - review & editing, Supervision. Jyotirmay Mathur: Writing -
review & editing. Amit Kanudia: Writing - review & editing. Anoop
Singh: Writing - review & editing.
Acknowledgments
The research work is supported by the Ministry of New and Renew-
able Energy of the Government of India under the National Renewable
Energy Fellowship Programme.
References
[1] S. Bandyopadhyay, Renewable targets for India, Clean Technol. Environ. Policy
(2017) 1–2.
[2] Central Electricity Authority, Executive summary for the month of September,
2019, 2019, [Online; accessed October 10, 2019]; URL http://www.cea.nic.in/
reports/monthly/installedcapacity/2019/installed_capacity-09.pdf.
[3] G. Shrimali, S. Srinivasan, S. Goel, D. Nelson, The effectiveness of federal
renewable policies in India, Renew. Sustain. Energy Rev. 70 (2017) 538–550.
[4] E.A. Moallemi, L. Aye, J.M. Webb, F.J. de Haan, B.A. George, India’s on-
grid solar power development: Historical transitions, present status and future
driving forces, Renew. Sustain. Energy Rev. 69 (2017) 239–247.
[5] S. Thapar, S. Sharma, A. Verma, Economic and environmental effectiveness of
renewable energy policy instruments: Best practices from India, Renew. Sustain.
Energy Rev. 66 (2016) 487–498.
[6] S. Chandel, R. Shrivastva, V. Sharma, P. Ramasamy, Overview of the initiatives
in renewable energy sector under the national action plan on climate change
in India, Renew. Sustain. Energy Rev. 54 (2016) 866–873.
[7] Government of India, India’s intended nationally determined contribution:
Working towards climate justice, 2015, [Online; accessed Dec 10, 2017];
URL http://www4.unfccc.int/ndcregistry/PublishedDocuments/India%20First/
INDIA%20INDC%20TO%20UNFCCC.pdf.
[8] Economic Times, India to have 450 GW renewable energy by 2030:
President, 2020, [Online; accessed Feb 05, 2020]; URL https://economictimes.
indiatimes.com/small-biz/productline/power-generation/india-to-have-450-
gw-renewable-energy-by-2030-president/articleshow/73804463.cms.
[9] Press Information Bureau, Cabinet approves amendments in Power Tariff Policy
to ensure 24x7 affordable Power for all, 2016, [Online; accessed Dec 10, 2017];
URL http://pib.nic.in/newsite/PrintRelease.aspx?relid=134630.
[10] E. Lannoye, D. Flynn, M. O’Malley, The role of power system flexibility in
generation planning, in: Proceedings of IEEE Power and Energy Society General
Meeting, 2011, pp. 1–6.
[11] E. Ela, M. Milligan, A. Bloom, A. Botterud, A. Townsend, T. Levin, B.A.
Frew, Wholesale electricity market design with increasing levels of renewable
generation: Incentivizing flexibility in system operations, Electr. J. 29 (4) (2016)
51–60.
[12] E. Hsieh, R. Anderson, Grid flexibility: The quiet revolution, Electr. J. 30 (2)
(2017) 1–8.
[13] G. Papaefthymiou, K. Dragoon, Towards 100% renewable energy systems:
Uncapping power system flexibility, Energy Policy 92 (2016) 69–82.
[14] Central Electricity Authority, Growth of electricity sector in India from 1947–
2019, 2019, [Online; accessed October 10, 2019]; URL http://www.cea.nic.in/
reports/others/planning/pdm/growth_2019.pdf.
[15] L. Hirth, F. Ueckerdt, O. Edenhofer, Integration costs revisited–An economic
framework for wind and solar variability, Renew. Energy 74 (2015) 925–939.
[16] N. Gast, D.-C. Tomozei, J.-Y. Le Boudec, Optimal generation and storage
scheduling in the presence of renewable forecast uncertainties, IEEE Trans.
Smart Grid 5 (3) (2014) 1328–1339.
15. Energy Strategy Reviews 29 (2020) 100482
15
P. Das et al.
[17] E.V. Mc Garrigle, P.G. Leahy, Quantifying the value of improved wind energy
forecasts in a pool-based electricity market, Renew. Energy 80 (2015) 517–524.
[18] P. Denholm, M. Hand, Grid flexibility and storage required to achieve very
high penetration of variable renewable electricity, Energy Policy 39 (3) (2011)
1817–1830.
[19] H.K. Jacobsen, S.T. Schröder, Curtailment of renewable generation: Economic
optimality and incentives, Energy Policy 49 (2012) 663–675.
[20] R. Golden, B. Paulos, Curtailment of renewable energy in California and beyond,
Electr. J. 28 (6) (2015) 36–50.
[21] L. Bird, J. Cochran, X. Wang, Wind and solar energy curtailment: experience
and practices in the United States, 2014, [Online; accessed Dec 10, 2017]; URL
https://www.nrel.gov/docs/fy14osti/60983.pdf.
[22] G. liang Luo, Y. ling Li, W. jun Tang, X. Wei, Wind curtailment of China’s wind
power operation: Evolution, causes and solutions, Renew. Sustain. Energy Rev.
53 (2016) 1190–1201.
[23] W. Pei, Y. Chen, K. Sheng, W. Deng, Y. Du, Z. Qi, L. Kong, Temporal-spatial
analysis and improvement measures of Chinese power system for wind power
curtailment problem, Renew. Sustain. Energy Rev. 49 (2015) 148–168.
[24] C. Li, H. Shi, Y. Cao, J. Wang, Y. Kuang, Y. Tan, J. Wei, Comprehensive review
of renewable energy curtailment and avoidance: A specific example in China,
Renew. Sustain. Energy Rev. 41 (2015) 1067–1079.
[25] L. Bird, D. Lew, M. Milligan, E.M. Carlini, A. Estanqueiro, D. Flynn, E. Gomez-
Lazaro, H. Holttinen, N. Menemenlis, A. Orths, P.B. Eriksen, J.C. Smith, L.
Soder, P. Sorensen, A. Altiparmakis, Y. Yasuda, J. Miller, Wind and solar energy
curtailment: A review of international experience, Renew. Sustain. Energy Rev.
65 (2016) 577–586.
[26] SOLARGIS, Free download of solar resource maps, 2017, [Online; ac-
cessed Dec 10, 2017]; URL http://solargis.com/products/maps-and-gis-data/
free/overview/.
[27] NIWE, Wind power potential at 100m agl, 2017, [Online; accessed Dec 10,
2017]; URL http://niwe.res.in/department_wra_100m%20agl.php.
[28] Green Tech Media, India already has a problem with wasting renewable
energy on the grid, 2016, [Online; accessed Dec 10, 2017]; URL
https://www.greentechmedia.com/articles/read/how-can-india-avoid-wasting-
renewable-energy.
[29] Bridge to India, Curtailment risk imminent for Indian solar projects
in the years to come, 2016, [Online; accessed Dec 10, 2017]; URL
http://www.bridgetoindia.com/curtailment-risk-imminent-for-indian-solar-
projects-in-the-years-to-come/.
[30] X. Yin, W. Zhang, X. Zhao, Current status and future prospects of continuously
variable speed wind turbines: A systematic review, Mech. Syst. Signal Process.
120 (2019) 326–340.
[31] X.-X. Yin, Y.-G. Lin, W. Li, Operating modes and control strategy for
megawatt-scale hydro-viscous transmission-based continuously variable speed
wind turbines, IEEE Trans. Sustain. Energy 6 (4) (2015) 1553–1564.
[32] H. Holttinen, A. Tuohy, M. Milligan, E. Lannoye, V. Silva, S. Muller, L. Soder,
The flexibility workout: managing variable resources and assessing the need for
power system modification, IEEE Power Energy Mag. 11 (6) (2013) 53–62.
[33] A. Olson, R.A. Jones, E. Hart, J. Hargreaves, Renewable curtailment as a power
system flexibility resource, Electr. J. 27 (9) (2014) 49–61.
[34] IEA, The Power of Transformation: Wind, Sun and the Economics of Flexible
Power Systems, 2014.
[35] R. Christoph, S. Philipp, H. Detlev, GIZ - India Green Energy Corridors: Report
on forecasting, concept of renewable energy management centres and grid
balancing, 2015, [Online; accessed Dec 10, 2017]; URL http://mnre.gov.in/file-
manager/UserFiles/draft-report-fscb-remcs.pdf.
[36] Ministry of Power, Allocation of power to states, 2019, [Online; accessed
February 20, 2020]; URL https://pib.gov.in/newsite/PrintRelease.aspx?relid=
194807.
[37] Central Electricity Regulatory Commission, The Indian electricity grid code,
2005, [Online; accessed February 20, 2020]; URL https://www.sldcmpindia.
com/uploads/download/revised_grid_code_2005.pdf.
[38] Central Electricity Regulatory Commission, CERC notification no. No. L-
1/18/2010-CERC, 2016, [Online; accessed Dec 10, 2017]; URL http://www.
cercind.gov.in/2016/regulation/124_1.pdf.
[39] Climate Home, India to halt building new coal plants in 2022, 2016, [Online;
accessed Dec 10, 2017]; URL http://www.climatechangenews.com/2016/12/
16/india-to-halt-building-new-coal-plants-in-2022/.
[40] Central Electricity Authority, Draft national electricity plan: (Vol I) generation,
2018, [Online; accessed Oct 10, 2019]; URL http://www.cea.nic.in/reports/
committee/nep/nep_jan_2018.pdf.
[41] J. Cochran, D. Lew, N. Kumarb, Flexible coal: Evolution from baseload to
peaking plant, 2013, [Online; accessed Dec 10, 2017]; URL http://www.nrel.
gov/docs/fy14osti/60575.pdf.
[42] Central Electricity Authority, Draft national electricity plan: (Vol I) generation,
2016, [Online; accessed Dec 10, 2017]; URL http://www.cea.nic.in/reports/
committee/nep/nep_dec.pdf.
[43] Platts, India halves LNG import duty to 2.5% to hike gas share in energy basket,
2017, [Online; accessed Dec 10, 2017]; URL https://www.platts.com/latest-
news/natural-gas/newdelhi/india-halves-lng-import-duty-to-25-to-hike-gas-
26652315.
[44] Mayank, Aggarwal, Give faster clearances to hydropower projects:
parliament panel, 2019, [Online; accessed Nov 10, 2019]; URL
https://india.mongabay.com/2019/02/give-faster-clearances-to-hydropower-
projects-parliament-panel/.
[45] R. Loisel, Power system flexibility with electricity storage technologies: A
technical–economic assessment of a large-scale storage facility, Int. J. Electr.
Power Energy Syst. 42 (1) (2012) 542–552.
[46] A.A. Akhil, G. Huff, A.B. Currier, B.C. Kaun, D.M. Rastler, S.B. Chen, A.L. Cotter,
D.T. Bradshaw, W.D. Gauntlett, DOE/EPRI 2013 Electricity Storage Handbook
in Collaboration with NRECA, Sandia National Laboratories, 2013.
[47] S. Koohi-Kamali, V. Tyagi, N. Rahim, N. Panwar, H. Mokhlis, Emergence of
energy storage technologies as the solution for reliable operation of smart power
systems: A review, Renew. Sustain. Energy Rev. 25 (2013) 135–165.
[48] D. Akinyele, R. Rayudu, Review of energy storage technologies for sustainable
power networks, Sustain. Energy Technol. Assess. 8 (2014) 74–91.
[49] P. Denholm, E. Ela, B. Kirby, M. Milligan, The role of energy storage with
renewable electricity generation, 2010, [Online; accessed Dec 10, 2017]; URL
http://www.nrel.gov/docs/fy10osti/47187.pdf.
[50] US DOE, DOE global energy storage database, 2017, [Online; accessed Dec 10,
2017]; URL http://www.energystorageexchange.org/.
[51] N. Sivakumar, D. Das, N. Padhy, Economic analysis of Indian pumped storage
schemes, Energy Convers. Manage. 88 (2014) 168–176.
[52] E. Barbour, I.G. Wilson, J. Radcliffe, Y. Ding, Y. Li, A review of pumped hydro
energy storage development in significant international electricity markets,
Renew. Sustain. Energy Rev. 61 (2016) 421–432.
[53] Green Tech Media, India wants to build 10 gigawatts of pumped hydro
storage to support solar, 2017, [Online; accessed Dec 10, 2017]; URL
https://www.greentechmedia.com/articles/read/india-to-build-pumped-hydro-
storage-for-solar.
[54] M.K. Pandey, A. Kumar, Pumped storage hydropower in India for integration
of intermittent renewable energy, Water Energy Int. 58 (2015).
[55] S. Bodeux, E. Pujades, P. Orban, S. Brouyère, A. Dassargues, Interactions
between groundwater and the cavity of an old slate mine used as lower reser-
voir of an upsh (underground pumped storage hydroelectricity): A modelling
approach, Eng. Geol. 217 (2016) 71–80.
[56] D.A. Katsaprakakis, D.G. Christakis, I. Stefanakis, P. Spanos, N. Stefanakis,
Technical details regarding the design, the construction and the operation of
seawater pumped storage systems, Energy 55 (2013) 619–630.
[57] N. Sivakumar, D. Das, N. Padhy, A.S. Kumar, N. Bisoyi, Status of pumped hydro-
storage schemes and its future in India, Renew. Sustain. Energy Rev. 19 (2013)
208–213.
[58] IESA, Energy storage potential India by 2022, 2017, [Online; accessed June 10,
2017]; URL http://m.ficci.in/events-page.asp?evid=23179.
[59] Ministry of Heavy Industries and Public Enterprises, GOI, National electric
mobility mission plan 2020, 2012, [Online; accessed Dec 10, 2017]; URL
http://dhi.nic.in/writereaddata/Content/NEMMP2020.pdf.
[60] A. Ulbig, G. Andersson, Analyzing operational flexibility of electric power
systems, Int. J. Electr. Power Energy Syst. 72 (2015) 155–164.
[61] E. Lannoye, D. Flynn, M. O’Malley, Transmission, variable generation, and
power system flexibility, IEEE Trans. Power Syst. 30 (1) (2015) 57–66.
[62] Ministry of Power, GOI, Overview of Indian transmission sector, 2017, [Online;
accessed October 10, 2017]; URL http://powermin.nic.in/en/content/overview-
0.
[63] The Economic Times, India loses 3.1 billion units of electricity to
transmission congestion in 2014-15, 2015, [Online; accessed Dec 10, 2017];
URL http://economictimes.indiatimes.com/industry/energy/power/india-
loses-3-1-billion-units-of-electricity-to-transmission-congestion-in-2014-
15/articleshow/47880267.cms.
[64] PGCIL, Desert power India–2050: Integrated plan for desert power development,
2013, [Online; accessed Dec 10, 2017]; URL http://indianpowerbusiness.com/
wp-content/uploads/2016/07/desert_power_india.pdf.
[65] Central Electricity Authority, Draft national electricity plan: (Vol II) trans-
mission, 2016, [Online; accessed Dec 10, 2017]; URL http://www.cea.nic.in/
reports/others/ps/pspa2/draft_nep_trans_2016.pdf.
[66] Central Electricity Authority, Perspective transmission plan for twenty years
(2014-2034), 2014, [Online; accessed November 10, 2017]; URL http://www.
cea.nic.in/reports/committee/scm/allindia/notices/3rd_report.pdf.
[67] SARI, South Asia regional initiative, 2012, [Online; accessed Dec 10, 2017];
URL https://sari-energy.org/.
[68] D. Chattopadhyay, P. Fernando, Cross-border power trading in South Asia: It’s
Time to raise the game, Electr. J. 24 (9) (2011) 41–50.
[69] A. Singh, T. Jamasb, R. Nepal, M. Toman, Cross-border electricity cooperation
in South Asia, 2015, [Online; accessed Dec 10, 2017]; URL http://documents.
worldbank.org/curated/en/392431468000898918/pdf/WPS7328.pdf.
[70] G.R. Timilsina, M. Toman, Potential gains from expanding regional electricity
trade in south asia, Energy Econ. 60 (2016) 6–14.
[71] P. Wijayatunga, D. Chattopadhyay, P. Fernando, Cross-Border Power Trading
in South Asia: A Techno Economic Rationale, Asian Development Bank, 2015,
[Online; accessed Dec 10, 2017]; URL https://www.adb.org/sites/default/files/
publication/173198/south-asia-wp-038.pdf.
16. Energy Strategy Reviews 29 (2020) 100482
16
P. Das et al.
[72] M.S. Huda, M. McDonald, Regional cooperation on energy in South Asia:
Unraveling the political challenges in implementing transnational pipelines and
electricity grids, Energy Policy 98 (2016) 73–83.
[73] A. Singh, P. Wijayatunga, P. Fernando, Improving Regulatory Environment
for a Regional Power Market in South Asia, Asian Development Bank, 2016,
[Online; accessed Dec 10, 2017]; URL https://www.adb.org/sites/default/files/
publication/190221/sawp-045.pdf.
[74] G. Strbac, Demand side management: Benefits and challenges, Energy policy 36
(12) (2008) 4419–4426.
[75] M.H. Albadi, E. El-Saadany, A summary of demand response in electricity
markets, Electr. Power Syst. Res. 78 (11) (2008) 1989–1996.
[76] B. Li, J. Shen, X. Wang, C. Jiang, From controllable loads to generalized
demand-side resources: A review on developments of demand-side resources,
Renew. Sustain. Energy Rev. 53 (2016) 936–944.
[77] P. Pinson, H. Madsen, et al., Benefits and challenges of electrical demand
response: A critical review, Renew. Sustain. Energy Rev. 39 (2014) 686–699.
[78] N.G. Paterakis, O. Erdinç, J.P. Catalão, An overview of demand response: Key-
elements and international experience, Renew. Sustain. Energy Rev. 69 (2017)
871–891.
[79] V. Harish, A. Kumar, Demand side management in India: action plan, policies
and regulations, Renew. Sustain. Energy Rev. 33 (2014) 613–624.
[80] J. Thakur, B. Chakraborty, Demand side management in developing nations: A
mitigating tool for energy imbalance and peak load management, Energy 114
(2016) 895–912.
[81] Shakti Sustainable Energy Foundation, IIT Bombay, Demand side management
in India: Technology assessment, 2014, [Online; accessed Dec 10, 2017];
URL http://shaktifoundation.in/wp-content/uploads/2014/02/Technology-
Assessment-for-DSM-in-India.pdf.
[82] S.F. Bush, What is smart grid communication? in: Smart Grid:Communication-
Enabled Intelligence for the Electric Power Grid, Wiley-IEEE Press, ISBN:
9781118820216, 2013, URL http://ieeexplore.ieee.org/xpl/articleDetails.jsp?
arnumber=6740213.
[83] V.C. Gungor, D. Sahin, T. Kocak, S. Ergut, C. Buccella, C. Cecati, G.P. Hancke,
Smart grid technologies: Communication technologies and standards, IEEE
Trans. Ind. Inf. 7 (4) (2011) 529–539.
[84] J. Zhu, Optimization of Power System Operation, Wiley-IEEE Press, ISBN:
9781118887004, 2015, URL http://ieeexplore.ieee.org/xpl/articleDetails.jsp?
arnumber=7046732.
[85] Ministry of Power, GOI, Smart grid vision and roadmap for India, 2013, [Online;
accessed Dec 10, 2017]; URL http://www.indiasmartgrid.org/reports/Smart%
20Grid%20Vision%20and%20Roadmap%20for%20India.pdf.
[86] Y. Diao, P. Etingov, S. Malhara, N. Zhou, R. Guttromson, J. Ma, P. Du,
N.S.C. Sastry, Analysis methodology for balancing authority cooperation in
high penetration of variable generation, 2010, [Online; accessed Dec 10,
2017]; URL http://www.pnl.gov/main/publications/external/technical_reports/
pnnl-19229.pdf.
[87] Q. Wang, H. Wu, A.R. Florita, C.B. Martinez-Anido, B.-M. Hodge, The value
of improved wind power forecasting: Grid flexibility quantification, ramp
capability analysis, and impacts of electricity market operation timescales, Appl.
Energy 184 (2016) 696–713.
[88] Central Electricity Regulatory Commission, Proposed framework for forecasting,
scheduling and imbalance handling for renewable energy (RE) generating
stations based on wind and solar at inter-state level, 2015, [Online; accessed
Dec 10, 2017]; URL http://www.cercind.gov.in/2015/draft_reg/frame.pdf.
[89] A. Sonia, O. Robbie, Grid flexibility: Methods for modernizing the power grid,
2016, [Online; accessed Dec 10, 2017]; URL http://energyinnovation.org/wp-
content/uploads/2016/05/Grid-Flexibility-report.pdf.
[90] Z. Zhou, T. Levin, G. Conzelmann, Survey of US Ancillary Services Markets-
Revised, Argonne National Laboratory (ANL), 2016, [Online; accessed Dec 10,
2017]; URL http://www.ipd.anl.gov/anlpubs/2016/09/130102.pdf.
[91] POSOCO, Detailed procedure for ancillary services operations prepared in
compliance to regulation 14 of CERC (ancillary services operations) regulations
2015, 2016, [Online; accessed Dec 10, 2017]; URL http://www.cercind.gov.in/
2015/regulation/DAS.pdf.
[92] Commission CER, Report on short-term power market in India: 2017-18,
2018, URL http://www.cercind.gov.in/2018/MMC/AR18.pdf [Online; accessed
November 10, 2019].
[93] Central Electricity Regulatory Commission, Discussion paper on re-designing
ancillary services mechanism, 2018, URL http://www.cercind.gov.in/2018/
draft_reg/DP.pdf [Online; accessed November 10, 2019].
[94] Central Electricity Regulatory Commission, Explanatory memorandum on intro-
duction of ancillary services in India, 2015, URL http://www.cercind.gov.in/
2015/draft_reg/Ancillary_Services.pdf [Online; accessed Dec 10, 2017].
[95] Central Electricity Regulatory Commission, Unscheduled interchange charges
and related matters, 2010, URL http://www.cercind.gov.in/Regulations/
Unscheduled_SOR-UI-final_26052010.pdf [Online; accessed Dec 10, 2017].
[96] Central Electricity Regulatory Commission, Deviation settlement mechanism and
related matters regulations, 2014, URL http://cercind.gov.in/2014/regulation/
noti132.pdf [Online; accessed Dec 10, 2017].
[97] Central Electricity Regulatory Commission, Suo-motu order of pilot on security
constrained economic dispatch (SCED) of inter-state generating stations (ISGS)
pan India, 2019, URL http://www.cercind.gov.in/2019/orders/02-SM-2019.pdf
[Online; accessed November 10, 2019].
[98] Y. Rebours, D. Kirschen, M. Trotignon, Fundamental design issues in markets
for ancillary services, Electr. J. 20 (6) (2007) 26–34.
[99] FERC, Order on tariff revisions, 2015, California Independent System Op-
erator Corporation ER16-2023-000, URL https://www.ferc.gov/CalendarFiles/
20160926164141-ER16-2023-000.pdf [Online; accessed Dec 10, 2017].
[100] PJM, PJM regulation market, 2015, URL http://www.pjm.com/~/media/
training/nerc-certifications/gen-exam-materials/gof/20160104-regulation-
market.ashx [Online; accessed Dec 10, 2017].
[101] Thinking Grids, Commercial opportunities in UKs 1bn ancillary services mar-
ket (2014 / 2015), 2015, URL http://www.thinkinggrids.com/thinking-grids/
ancillary-services-increasingly-important-marketplaces [Online; accessed Dec
10, 2017].
[102] CASIO, Western energy imbalance market (EIM), 2017, URL http://www.
caiso.com/informed/Pages/EIMOverview/Default.aspx [Online; accessed Dec
10, 2017].
[103] Central Electricity Regulatory Commission, Modification of time block for
bidding from one hour to fifteen minutes, 2011, URL http://www.cercind.gov.
in/2011/May/signed_order_in_suo_motu_pet_No_127-2011.pdf [Online; accessed
Dec 10, 2017].
[104] I. Chernyakhovskiy, T. Tian, J. McLaren, M. Miller, N. Geller, US Laws and
Regulations for Renewable Energy Grid Interconnections, Tech. Rep., NREL
National Renewable Energy Laboratory (NREL), Golden, CO (United States),
2016.
[105] IEA, Large-scale electricity interconnection: technology and prospects for
cross-regional networks, 2017, URL https://www.iea.org/publications/
freepublications/publication/Interconnection.pdf [Online; accessed Dec 10,
2017].
[106] Central Electricity Regulatory Commission, Discussion paper: revised scheme
of incentive and disincentive for thermal generating stations, 2017, URL http:
//www.cercind.gov.in/08022007/Discussion%20Paper_1.pdf [Online; accessed
Dec 10, 2017].
[107] RAP Energy Solutions, What lies beyond capacity markets, 2012,
URL http://www.raponline.org/wp-content/uploads/2016/05/rap-hogan-
whatliesbeyondcapacitymarkets-2012-aug-14.pdf [Online; accessed Dec 10,
2017].
[108] M. Gottstein, S. Skillings, Beyond capacity markets—-delivering capability re-
sources to europe’s decarbonised power system, in: 9th International Conference
on the European Energy Market (EEM), IEEE, 2012, pp. 1–8.
[109] A. Foley, B.Ó. Gallachóir, J. Hur, R. Baldick, E. McKeogh, A strategic review
of electricity systems models, Energy 35 (12) (2010) 4522–4530.
[110] V. Oree, S.Z.S. Hassen, P.J. Fleming, Generation expansion planning optimisa-
tion with renewable energy integration: a review, Renew. Sustain. Energy Rev.
69 (2017) 790–803.
[111] S. Pfenninger, A. Hawkes, J. Keirstead, Energy systems modeling for twenty-first
century energy challenges, Renew. Sustain. Energy Rev. 33 (2014) 74–86.
[112] E. Lannoye, D. Flynn, M. O’Malley, Evaluation of power system flexibility, IEEE
Trans. Power Syst. 27 (2) (2012) 922–931.
[113] J. Ma, V. Silva, R. Belhomme, D.S. Kirschen, L.F. Ochoa, Evaluating and
planning flexibility in sustainable power systems, in: Proceedings of IEEE Power
and Energy Society General Meeting, IEEE, 2013, pp. 1–11.
[114] A. Shortt, J. Kiviluoma, M. O’Malley, Accommodating variability in generation
planning, IEEE Trans. Power Syst. 28 (1) (2013) 158–169.
[115] J. Deane, A. Chiodi, M. Gargiulo, B.P.Ó. Gallachóir, Soft-linking of a power
systems model to an energy systems model, Energy 42 (1) (2012) 303–312.
[116] A. Pina, C. Silva, P. Ferrão, Modeling hourly electricity dynamics for policy
making in long-term scenarios, Energy Policy 39 (9) (2011) 4692–4702.
[117] K. Poncelet, E. Delarue, D. Six, J. Duerinck, W. D’haeseleer, Impact of the level
of temporal and operational detail in energy-system planning models, Appl.
Energy 162 (2016) 631–643.
[118] G. Haydt, V. Leal, A. Pina, C.A. Silva, The relevance of the energy resource
dynamics in the mid/long-term energy planning models, Renew. Energy 36
(11) (2011) 3068–3074.
[119] J. Després, N. Hadjsaid, P. Criqui, I. Noirot, Modelling the impacts of variable
renewable sources on the power sector: reconsidering the typology of energy
modelling tools, Energy 80 (2015) 486–495.
[120] P.R. Shukla, P. Agarwal, A.B. Bazaz, N. Agarwal, M. Kainuma, T. Masui,
Low carbon society vision 2050: India, 2009, URL http://www.kooperation-
international.de/uploads/media/indialcs.pdf [Online; accessed Dec 10, 2017].
[121] Planning Commission of India, Low carbon strategies for inclusive growth,
2014, URL http://planningcommission.nic.in/reports/genrep/rep_carbon2005.
pdf [Online; accessed Dec 10, 2017].
[122] The Energy and Resource Institute, WWF–India, The Energy Report–India: 100%
Renewable Energy By 2050, WWF–India, 2013, URL http://awsassets.wwfindia.
org/downloads/the_energy_report_india.pdf [Online; accessed Dec 10, 2017].
[123] G. Anandarajah, A. Gambhir, India’s CO2 emission pathways to 2050: What
role can renewables play?, Appl. Energy 131 (2014) 79–86.
17. Energy Strategy Reviews 29 (2020) 100482
17
P. Das et al.
[124] T. Energy, R. Institute, Energy Security Outlook : Defining a Secure and
Sustainable Energy Future for India, TERI, 2015, URL https://bookstore.teri.
res.in/docs/books/ENERGY%20SECURITY%20OUTLOOK.pdf.
[125] P. Das, J. Mathur, R. Bhakar, A. Kanudia, Implications of short-term renewable
energy resource intermittency in long-term power system planning, Energy
Strateg. Rev. 22 (2018) 1–15.
[126] S. Collins, J.P. Deane, K. Poncelet, E. Panos, R.C. Pietzcker, E. Delarue, B.P.Ó.
Gallachóir, Integrating short term variations of the power system into integrated
energy system models: A methodological review, Renew. Sustain. Energy Rev.
76 (2017) 839–856.
[127] K. Tigas, G. Giannakidis, J. Mantzaris, D. Lalas, N. Sakellaridis, C. Nakos, Y.
Vougiouklakis, M. Theofilidi, E. Pyrgioti, A. Alexandridis, Wide scale pene-
tration of renewable electricity in the Greek energy system in view of the
european decarbonization targets for 2050, Renew. Sustain. Energy Rev. 42
(2015) 158–169.
[128] A.S. Brouwer, M. van den Broek, A. Seebregts, A. Faaij, Operational flexibility
and economics of power plants in future low-carbon power systems, Appl.
Energy 156 (2015) 107–128.
[129] A. Pina, C.A. Silva, P. Ferrão, High-resolution modeling framework for planning
electricity systems with high penetration of renewables, Appl. Energy 112
(2013) 215–223.
[130] D. Möst, W. Fichtner, Renewable energy sources in European energy supply and
interactions with emission trading, Energy Policy 38 (6) (2010) 2898–2910.
[131] Climate Policy Initiative, Developing a roadmap to a flexible, low-carbon indian
electricity system: interim findings, 2019, URL https://climatepolicyinitiative.
org/wp-content/uploads/2019/02/CPI-India-Flexibility-February-2019.pdf
[Online; accessed November 10, 2019].
[132] The Energy and Resource Institute, Exploring electricity supply-mix scenar-
ios to 2030, 2019, URL https://www.teriin.org/sites/default/files/2019-02/
Exploring%20Electricity%20Supply-Mix%20Scenarios%20to%202030.pdf [On-
line; accessed November 10, 2019].
[133] D. Palchak, I. Chernyakhovskiy, T. Bowen, V. Narwade, India 2030 wind and
solar integration study: interim report, 2019, URL https://www.nrel.gov/docs/
fy19osti/73854.pdf [Online; accessed November 10, 2019].
[134] Central Electricity Authority, Flexible operation of thermal power plant
for integration of renewable generation, 2019, URL http://www.cea.nic.in/
reports/others/thermal/trm/flexible_operation.pdf [Online; accessed November
10, 2019].
[135] F. Ueckerdt, L. Hirth, G. Luderer, O. Edenhofer, System LCOE: what are the
costs of variable renewables?, Energy 63 (2013) 61–75.
[136] K. Eurek, W. Cole, D. Bielen, N. Blair, S. Cohen, B. Frew, J. Ho, V. Kr-
ishnan, T. Mai, B. Sigrin, D. Steinberg, Regional Energy Deployment System
(ReEDS) Model Documentation: Version 2016, National Renewable Energy
Laboratory, 2016, URL http://www.nrel.gov/docs/fy17osti/67067.pdf [Online;
accessed Dec 10, 2017].