The Fibaro Z-Wave modules are small electronic modules compatible with any Z-Wave home automation system. They can be installed in standard wall switch boxes in just 3 minutes using a screwdriver. The Home Center 2 and Home Center Lite are Z-Wave gateways with fast processors, remote access, and backup systems to securely manage connected devices. The Fibaro modules described include dimmers, roller shutters, and relay switches to control lights, motors, and other devices remotely.
Manual del dispositivo regulador oculto Z-Wave de Widom que permite variar la intensidad de una lámpara, o la velocidad de un motor (como por ejemplo un ventilador).
The WiDom Roller Shutter V2 is a small and compact device which can control your roller shutters, blinds, curtains, etc. Thanks to its sophisticated design the modul fits into a junction box
The UNO-2.0-I and UNO-2.5-I are the latest single phase string inverters in the line. A new-look inverter but packed with ABB’s proven high performing technology. The new look inverter has new features including a special built-in heat sink compartment and front panel display system.
WGS-5225-8UP2SV is an Industrial Wall-mount PoE++ Managed Switch with LCD Touch Screen featuring PoE functions to improve the availability of industrial applications. It provides IPv6/IPv4 dual stack management and built-in L2+/L4 Gigabit switching engine along with eight 10/100/1000BASE-T ports featuring 95-watt PoE and two additional 100/1000/2500BASE-X SFP ports.
Contact us
Tel: +91-7875432180 Email: sales@bbcpl.in
Website: https://bbcpl.in
Fibaro RGBW Controller / Z-Wave Multi Sensor Fibaro USA
• Fibaro RGBW Micro Module Controller is the first of its kind z-wave based wireless advanced 4-color LED strip controller. (12V and 24V) Apart from traditional RGB channels, it also supports white light channel, allowing for adding pastel to the color scheme, giving you millions of light color options. These four output channels allow for independently controlling or dimming each light source.
• Additionally, the device may control up to four analog sensors allowing for even greater autonomy of the Fibaro Intelligent Home Automation System. The four analog inputs support any sensors that operates within 0-10V range, e.g. light, wind, humidity, CO2, pH, calcium, pressure, proximity sensors, and potentiometers just to name a few.
• The RGBW Controller also has live power consumption monitoring capabilities, (sub-metering) independently for each of the four channels or in total.
• Last but not least, the RGBW Controller has the ability to have the firmware updated wirelessly, never having to take it out of it’s installed location. This feature makes sure the controller is always up to date in the future all while keeping the process simple.
Manual del dispositivo regulador oculto Z-Wave de Widom que permite variar la intensidad de una lámpara, o la velocidad de un motor (como por ejemplo un ventilador).
The WiDom Roller Shutter V2 is a small and compact device which can control your roller shutters, blinds, curtains, etc. Thanks to its sophisticated design the modul fits into a junction box
The UNO-2.0-I and UNO-2.5-I are the latest single phase string inverters in the line. A new-look inverter but packed with ABB’s proven high performing technology. The new look inverter has new features including a special built-in heat sink compartment and front panel display system.
WGS-5225-8UP2SV is an Industrial Wall-mount PoE++ Managed Switch with LCD Touch Screen featuring PoE functions to improve the availability of industrial applications. It provides IPv6/IPv4 dual stack management and built-in L2+/L4 Gigabit switching engine along with eight 10/100/1000BASE-T ports featuring 95-watt PoE and two additional 100/1000/2500BASE-X SFP ports.
Contact us
Tel: +91-7875432180 Email: sales@bbcpl.in
Website: https://bbcpl.in
Fibaro RGBW Controller / Z-Wave Multi Sensor Fibaro USA
• Fibaro RGBW Micro Module Controller is the first of its kind z-wave based wireless advanced 4-color LED strip controller. (12V and 24V) Apart from traditional RGB channels, it also supports white light channel, allowing for adding pastel to the color scheme, giving you millions of light color options. These four output channels allow for independently controlling or dimming each light source.
• Additionally, the device may control up to four analog sensors allowing for even greater autonomy of the Fibaro Intelligent Home Automation System. The four analog inputs support any sensors that operates within 0-10V range, e.g. light, wind, humidity, CO2, pH, calcium, pressure, proximity sensors, and potentiometers just to name a few.
• The RGBW Controller also has live power consumption monitoring capabilities, (sub-metering) independently for each of the four channels or in total.
• Last but not least, the RGBW Controller has the ability to have the firmware updated wirelessly, never having to take it out of it’s installed location. This feature makes sure the controller is always up to date in the future all while keeping the process simple.
Fibaro Door/Window sensor is a compatible Reed Sensor with temperature sensor ability. The Door/Window has Binary Sensor which allows the integration of motion sensors, flood sensors, and alarm systems. Additionaly the Sensor gets wireless firmware updates. The Door/Window Sensor comes in 7 colors
"In the next century, planet earth will don an electronic skin. It will use the Internet as a scaffold to support and transmit its sensations. This skin is already being stitched together. It consists of millions of embedded electronic measuring devices: thermostats, pressure gauges, pollution detectors, cameras, microphones, glucose sensors, EKGs, electroencephalographs. These will probe and monitor cities and endangered species, the atmosphere, our ships, highways and fleets of trucks, our conversations, our bodies--even our dreams."
1999 - Neil Gross in Business Week
Building a smart home ecosystem urgent need for standardizationCarsten Steigleder
DT has the ambition to build a smart home ecosystem. We see an urgent need for standardization. DT wants to share its view on standardizing components of the Smart Home and our requirements to better support the service provider buisness model
In December 2016 research firm NextMarket Insights surveyed over 140 smart home industry executives to better understand the state of the industry, the biggest hurdles, successes and what they expected in 2017.
Multi-Link Product Line Card 2016 *RevisedScott Shelton
Founded in 1987, Multi-Link, Inc. is a USA-based manufacturer dedicated to the development and marketing of high quality telecommunications devices, including remote power control management, telephone line-sharing, and industrial grade POTS line and Ethernet wireless extenders. Our products are used by SOHOs to Fortune 500 companies, state and federal government agencies, and industry best VARs & datacom Integrators.
Used in a wide variety of commercial and government applications to improve communications and service efficiencies, Multi-Link customers have achieved millions of dollars in telecommunications and service costs savings, typically with an ROI in less than 90 days.
Essentials of Automations: Optimizing FME Workflows with ParametersSafe Software
Are you looking to streamline your workflows and boost your projects’ efficiency? Do you find yourself searching for ways to add flexibility and control over your FME workflows? If so, you’re in the right place.
Join us for an insightful dive into the world of FME parameters, a critical element in optimizing workflow efficiency. This webinar marks the beginning of our three-part “Essentials of Automation” series. This first webinar is designed to equip you with the knowledge and skills to utilize parameters effectively: enhancing the flexibility, maintainability, and user control of your FME projects.
Here’s what you’ll gain:
- Essentials of FME Parameters: Understand the pivotal role of parameters, including Reader/Writer, Transformer, User, and FME Flow categories. Discover how they are the key to unlocking automation and optimization within your workflows.
- Practical Applications in FME Form: Delve into key user parameter types including choice, connections, and file URLs. Allow users to control how a workflow runs, making your workflows more reusable. Learn to import values and deliver the best user experience for your workflows while enhancing accuracy.
- Optimization Strategies in FME Flow: Explore the creation and strategic deployment of parameters in FME Flow, including the use of deployment and geometry parameters, to maximize workflow efficiency.
- Pro Tips for Success: Gain insights on parameterizing connections and leveraging new features like Conditional Visibility for clarity and simplicity.
We’ll wrap up with a glimpse into future webinars, followed by a Q&A session to address your specific questions surrounding this topic.
Don’t miss this opportunity to elevate your FME expertise and drive your projects to new heights of efficiency.
Generating a custom Ruby SDK for your web service or Rails API using Smithyg2nightmarescribd
Have you ever wanted a Ruby client API to communicate with your web service? Smithy is a protocol-agnostic language for defining services and SDKs. Smithy Ruby is an implementation of Smithy that generates a Ruby SDK using a Smithy model. In this talk, we will explore Smithy and Smithy Ruby to learn how to generate custom feature-rich SDKs that can communicate with any web service, such as a Rails JSON API.
Builder.ai Founder Sachin Dev Duggal's Strategic Approach to Create an Innova...Ramesh Iyer
In today's fast-changing business world, Companies that adapt and embrace new ideas often need help to keep up with the competition. However, fostering a culture of innovation takes much work. It takes vision, leadership and willingness to take risks in the right proportion. Sachin Dev Duggal, co-founder of Builder.ai, has perfected the art of this balance, creating a company culture where creativity and growth are nurtured at each stage.
Kubernetes & AI - Beauty and the Beast !?! @KCD Istanbul 2024Tobias Schneck
As AI technology is pushing into IT I was wondering myself, as an “infrastructure container kubernetes guy”, how get this fancy AI technology get managed from an infrastructure operational view? Is it possible to apply our lovely cloud native principals as well? What benefit’s both technologies could bring to each other?
Let me take this questions and provide you a short journey through existing deployment models and use cases for AI software. On practical examples, we discuss what cloud/on-premise strategy we may need for applying it to our own infrastructure to get it to work from an enterprise perspective. I want to give an overview about infrastructure requirements and technologies, what could be beneficial or limiting your AI use cases in an enterprise environment. An interactive Demo will give you some insides, what approaches I got already working for real.
State of ICS and IoT Cyber Threat Landscape Report 2024 previewPrayukth K V
The IoT and OT threat landscape report has been prepared by the Threat Research Team at Sectrio using data from Sectrio, cyber threat intelligence farming facilities spread across over 85 cities around the world. In addition, Sectrio also runs AI-based advanced threat and payload engagement facilities that serve as sinks to attract and engage sophisticated threat actors, and newer malware including new variants and latent threats that are at an earlier stage of development.
The latest edition of the OT/ICS and IoT security Threat Landscape Report 2024 also covers:
State of global ICS asset and network exposure
Sectoral targets and attacks as well as the cost of ransom
Global APT activity, AI usage, actor and tactic profiles, and implications
Rise in volumes of AI-powered cyberattacks
Major cyber events in 2024
Malware and malicious payload trends
Cyberattack types and targets
Vulnerability exploit attempts on CVEs
Attacks on counties – USA
Expansion of bot farms – how, where, and why
In-depth analysis of the cyber threat landscape across North America, South America, Europe, APAC, and the Middle East
Why are attacks on smart factories rising?
Cyber risk predictions
Axis of attacks – Europe
Systemic attacks in the Middle East
Download the full report from here:
https://sectrio.com/resources/ot-threat-landscape-reports/sectrio-releases-ot-ics-and-iot-security-threat-landscape-report-2024/
Accelerate your Kubernetes clusters with Varnish CachingThijs Feryn
A presentation about the usage and availability of Varnish on Kubernetes. This talk explores the capabilities of Varnish caching and shows how to use the Varnish Helm chart to deploy it to Kubernetes.
This presentation was delivered at K8SUG Singapore. See https://feryn.eu/presentations/accelerate-your-kubernetes-clusters-with-varnish-caching-k8sug-singapore-28-2024 for more details.
Software Delivery At the Speed of AI: Inflectra Invests In AI-Powered QualityInflectra
In this insightful webinar, Inflectra explores how artificial intelligence (AI) is transforming software development and testing. Discover how AI-powered tools are revolutionizing every stage of the software development lifecycle (SDLC), from design and prototyping to testing, deployment, and monitoring.
Learn about:
• The Future of Testing: How AI is shifting testing towards verification, analysis, and higher-level skills, while reducing repetitive tasks.
• Test Automation: How AI-powered test case generation, optimization, and self-healing tests are making testing more efficient and effective.
• Visual Testing: Explore the emerging capabilities of AI in visual testing and how it's set to revolutionize UI verification.
• Inflectra's AI Solutions: See demonstrations of Inflectra's cutting-edge AI tools like the ChatGPT plugin and Azure Open AI platform, designed to streamline your testing process.
Whether you're a developer, tester, or QA professional, this webinar will give you valuable insights into how AI is shaping the future of software delivery.
GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using Deplo...James Anderson
Effective Application Security in Software Delivery lifecycle using Deployment Firewall and DBOM
The modern software delivery process (or the CI/CD process) includes many tools, distributed teams, open-source code, and cloud platforms. Constant focus on speed to release software to market, along with the traditional slow and manual security checks has caused gaps in continuous security as an important piece in the software supply chain. Today organizations feel more susceptible to external and internal cyber threats due to the vast attack surface in their applications supply chain and the lack of end-to-end governance and risk management.
The software team must secure its software delivery process to avoid vulnerability and security breaches. This needs to be achieved with existing tool chains and without extensive rework of the delivery processes. This talk will present strategies and techniques for providing visibility into the true risk of the existing vulnerabilities, preventing the introduction of security issues in the software, resolving vulnerabilities in production environments quickly, and capturing the deployment bill of materials (DBOM).
Speakers:
Bob Boule
Robert Boule is a technology enthusiast with PASSION for technology and making things work along with a knack for helping others understand how things work. He comes with around 20 years of solution engineering experience in application security, software continuous delivery, and SaaS platforms. He is known for his dynamic presentations in CI/CD and application security integrated in software delivery lifecycle.
Gopinath Rebala
Gopinath Rebala is the CTO of OpsMx, where he has overall responsibility for the machine learning and data processing architectures for Secure Software Delivery. Gopi also has a strong connection with our customers, leading design and architecture for strategic implementations. Gopi is a frequent speaker and well-known leader in continuous delivery and integrating security into software delivery.
Key Trends Shaping the Future of Infrastructure.pdfCheryl Hung
Keynote at DIGIT West Expo, Glasgow on 29 May 2024.
Cheryl Hung, ochery.com
Sr Director, Infrastructure Ecosystem, Arm.
The key trends across hardware, cloud and open-source; exploring how these areas are likely to mature and develop over the short and long-term, and then considering how organisations can position themselves to adapt and thrive.
Transcript: Selling digital books in 2024: Insights from industry leaders - T...BookNet Canada
The publishing industry has been selling digital audiobooks and ebooks for over a decade and has found its groove. What’s changed? What has stayed the same? Where do we go from here? Join a group of leading sales peers from across the industry for a conversation about the lessons learned since the popularization of digital books, best practices, digital book supply chain management, and more.
Link to video recording: https://bnctechforum.ca/sessions/selling-digital-books-in-2024-insights-from-industry-leaders/
Presented by BookNet Canada on May 28, 2024, with support from the Department of Canadian Heritage.
Encryption in Microsoft 365 - ExpertsLive Netherlands 2024Albert Hoitingh
In this session I delve into the encryption technology used in Microsoft 365 and Microsoft Purview. Including the concepts of Customer Key and Double Key Encryption.
Encryption in Microsoft 365 - ExpertsLive Netherlands 2024
Fibaro System
1. Fibaro Z-Wave modules:
• Compatible with any Z-Wave home automation system,
• Fibaro electronic modules are smallest devices of the type in the World and can be installed
in all standard wall switch boxes,
• Each module can be installed in 3 minutes, using just a screwdriver,
• Designed and made in EU, in compliance with all EU regulations,
• Available in competitive prices.
For additional information please contact us:
Michal Rodziewicz
Sales Director
Fibar Group Ltd.
e-mail: m.rodziewicz@fibargroup.com
phone: +48 509 676 518
2. Home Center 2 FGHC2
Product Highlights:
Technical Specification
Extremely efficient hardware architecture = fastest device of the type in the World,
• Ultra low energy consumption,
• Remote access via web page or mobile phone,
• Simple, user friendly interface,
• Fast and simple configuration,
• Geo localization – tracking Your family members,
• SMS notification,
• Manageable users’ rights,
• Various devices’ associations,
• Conditioning scenes depending on weather or other, user-defined variables,
• Advanced recovery system,
• System backup is always saved on attached pen drive, hidden in the casing,
• History of events.
Thanks to it’s efficiency, Home Center 2 is much, much faster than other Z-Wave gateways,
currently available in the World.
Intel Atom 1,6Ghz Processor
Large memory + fast processor = quick communication between Fibaro System devices.
Hardware architecture used in Home Center 2 makes Z-Wave based home automation
system work much faster then ever.
1GB RAM, 2GB SLC Hard Drive
Significantly improved user safety thanks to Fibar Group own approach to data protection.
Each Home Center 2 has its’ own Recovery disc, holding system backup, unique to each
gateway. This closes each system completely from unauthorized access. Other advantage
of this solution is quick and simple system healing after any failure.
4GB MLC Recovery Disc
3. Home Center Lite FGHCL
Product Highlights:
• Extremely efficient, optimized hardware architecture,
• Ultra low energy consumption,
• Remote access via web page or mobile phone,
• Simple, user friendly interface,
• Fast and simple configuration,
• Geo localization – tracking Your family members,
• Manageable users’ rights,
• Various devices’ associations,
• Conditioning scenes depending on weather or other, user-defined variables,
• Advanced recovery system,
• System backup is always saved on cloud service,
• History of events.
Technical Specification:
Optimized memory + fast processor = quick communication between Fibaro System devices.
ARM Cortex A8 720 MHz Processor
Hardware architecture used in Home Center Lite makes Z-Wave based home automation
system work much easier then ever.
Radio Frequency:
868,4 MHz EU; 908,4 MHz US; 921,4 MHz ANZ; 869,2 MHz RU; 915 - 917 MHz IL
Z-Wave
Significantly improved user safety thanks to Fibar Group proprietary approach to data
protection. Each Home Center Lite has its’ own recovery system, holding system backup in
cloud, unique to each gateway. This closes each system completely from unauthorized
access.
128MB RAM, 128MB SLC Hard Drive
4. Universal Dimmer 500W FGD-211
Product Overview:
Radio controlled light dimming module, designed to work with light sources of any type. May
be connected to two-wire or three-wire cable. Fibaro Dimmer can switch or dim connected
litght source either through radio waves or through the wall switch connected directly to it.
Automatically senses connected device, features automatic overload protection switch-off and
soft start function.
Works as a dimmer or as a connector, with two-wire or three-wire cables.
In case of old type fluorescent light sources or old type transformers, only on/off function may
be possible.
Product Highlights:
As a dimmer, works with:
• Conventional fluorescent lamps,
• 230V operated halogen lamps,
• 12V operated halogen lamps,
• Dimmable LED lamps,
• Using Bypass FGB001, with any dimmable light source up to 500W.
As a connector, works with:
• Compact fluorescent lights,
• LED lamps,
• Old type fluorescent lamps.
Our Dimmer is the smallest device of the type in the World!
5. Technical Data:
• Power source 230V +/-10%, 50Hz,
• Output power 25-500W (resistive loads only)*,
• Conforms to UE requlations:EN55022 (radio wave interference), EN61000-6 (safety of use),
• Surge protection: 2,5A,
• Ambient temperature: 10o
C - 40o
C,
• To be mounted in standard wall switch boxes Ø ≥ 50mm,
• Radio protocol: Z-Wave,
• Radio Frequency 868,4 MHz EU; 908,4 MHz US; 921,4 MHz ANZ; 869,2 MHz RU,
• Antenna range: up to ca. 50 meters outdoor, or up to 30 meters inside
(depends on building structure),
• Outside dimmensions (L x W x H) 42mm x 36mm x 15mm.
* in case of loads other than resistive, current intensity may not exceed 1.8A
Universal Dimmer 500W FGD-211
6. Roller Shutter FGR-221
Product Overview:
Radio controlled module, designed to work with electric motors in blinds, rollers, canopies and
such. Fibaro Blind/Roller Shutter can steer connected device either through radio waves or
through the wall switch, connected directly to it. Equipped with unique feature of monitoring
current Roller/Blind position.
Product Highlights:
• Controlled through other Fibaro devices or any Z-Wave controller,
• Microprocessor controlled,
• Our Blind/Roller Shutter is the smallest device of the type in the World!
Technical Data:
• Power Source 110V - 230V +/-10% 50/60Hz,
• Output power up to 1kW,
• Conforms to UE requlations:EN55022 (radio wave interference), EN61000-6 (safety of use),
• Overheating protection: safety off at 105o
C,
• Ambient temperature: 10o
C - 40o
C,
• To be mounted in standard wall switch boxes Ø ≥50mm,
• Radio protocol: Z-Wave,
• Radio Frequency 868,4 MHz EU; 908,4 MHz US; 921,4 MHz ANZ; 869,2 MHz RU,
• Antenna range: up to ca. 50 meters outdoor, or up to 30 meters inside
(depends on building structure),
• Outside dimmensions (L x W x H) 42mm x 36mm x 15mm.
7. Roller Shutter 2 FGRM-222
Product Overview:
New edition of Fibaro Roller Shutter, featuring a unique functionality of a garage gate controller
and power metering function. Designed to work with any, VAC powered electric motor, equip-
ped with either electronic or mechanic limit switches. Built-in, extremely accurate, calibrating
mechanism allows for precise positioning of roller blinds or venetian blinds slats. Fibaro Roller
Shutter 2 can control connected device either through radio waves or through the wall switch,
connected directly to it.
Product Highlights:
• Power metering function,
• Built-in Z-Wave network range tester,
• Unique, garage gate controller mode,
• Ultra precise roller blind and venetian blind positioning,
• Remote software update,
• Smallest device of that type in the world.
8. Technical Data:
• Power Source 110V - 230V +/-10% 50/60Hz,
• Output power up to 1kW,
• Conforms to UE requlations:EN55022 (radio wave interference), EN61000-6 (safety of use),
• Overheating protection: safety off at 105o
C,
• Ambient temperature: 10o
C - 40o
C,
• To be mounted in standard wall switch boxes Ø ≥50mm,
• Radio protocol: Z-Wave,
• Radio Frequency 868,4 MHz EU; 908,4 MHz US; 921,4 MHz ANZ; 869,2 MHz RU,
• Antenna range: up to ca. 50 meters outdoor, or up to 30 meters inside
(depends on building structure),
• Outside dimmensions (L x W x H) 42mm x 36mm x 15mm.
Roller Shutter 2 FGRM-222
9. Relay Switch 1x3kW FGS-211
Product Overview:
Radio controlled Fibaro On/Off Relay Switch is designed to be installed in standard wall switch
boxes, or anywhere else where it is necessary to operate an electric device of 3,0kW power
output. Fibaro On/Off Relay Switch can switch on or off connected device either through radio
waves or through the wall switch connected directly to it.
Product Highlights:
• Controlled through other Fibaro devices or any Z-Wave controller,
• Microprocessor controlled,
• Our ON/OFF Relay Switch is the smallest device of the type in the World!
Technical Data:
• Power Source 110V - 230V +/-10% 50/60Hz,
• Max. AC output: 16A / 230V 50/60Hz,
• Max. DC output: 16A / 30V,
• Max. power output (resistive loads only) 3 kW (in case of loads other than resistive it may be
necessary to connect lower output in order to protect the Switch from damage),
• Conforms to UE requlations:EN55022 (radio wave interference), EN61000-6 (safety of use),
• Overheating protection: safety off at 105o
C,
• Ambient temperature: 10o
C - 40o
C,
• To be mounted in standard wall switch boxes Ø ≥50mm,
• Radio protocol: Z-Wave,
• Radio Frequency 868,4 MHz EU; 908,4 MHz US; 921,4 MHz ANZ; 869,2 MHz RU,
• Antenna range: up to ca. 50 meters outdoor, or up to 30 meters inside
(depends on building structure),
• Outside dimmensions (L x W x H) 42mm x 36mm x 15mm.
10. Relay Switch 2x1,5kW FGS-221
Product Overview:
Radio controlled Fibaro Double On/Off Relay Switch is designed to be installed in standard wall
switch boxes, or anywhere else where it is necessary to operate two independent devices of
1,5kW combined power output. Fibaro Double On/Off Relay Switch can switch on or off
connected devices either through radio waves or through the wall switch connected directly to
Product Highlights:
• Controlled through other Fibaro devices or any Z-Wave controller,
• Microprocessor controlled,
• Our ON/OFF Relay Switch is the smallest device of the type in the World!
Technical Data:
• Power Source 110V - 230V +/-10% 50/60Hz,
• Max. single AC output: 8A / 230V 50/60Hz,
• Max. single DC output: 8A / 30V,
• Max. combined power output (resistive loads only) - 2 x 1,5 kW (in case of loads other than
resistive it may be necessary to connect lower output in order to protect the Switch from
damage),
• Conforms to UE requlations:EN55022 (radio wave interference), EN61000-6 (safety of use),
• Overheating protection: safety off at 105o
C,
• Ambient temperature: 10o
C - 40o
C,
• To be mounted in standard wall switch boxes Ø ≥50mm,
• Radio protocol: Z-Wave,
• Radio Frequency 868,4 MHz EU; 908,4 MHz US; 921,4 MHz ANZ; 869,2 MHz RU,
• Antenna range: up to ca. 50 meters outdoor, or up to 30 meters inside
(depends on building structure),
• Outside dimmensions (L x W x H) 42mm x 36mm x 15mm.
11. RGBW Controller FGRGBWM-441
Product Overview:
Universal, Z-Wave compatible RGB / RGBW controller. Fibaro RGBW Controller may control
LED strips, RGB / RGBW LEDs and 12V - 24V powered light sources. In addition the device
supports up to four, 0V - 10V analogue sensors, such as temperature sensors, humidity
sensors, wind sensors, air quality sensors, light sensors etc. All IN and OUT terminals may be
user configured for LED control or 0V-10V signal readouts. May be used as a dimmer with
Halogen lamps.
Product Highlights:
• Current and historical power consumption measuring
• Controlled through other Fibaro devices or any Z-Wave controller,
• Microprocessor controlled,
• Most advanced device of this type in the World.
Technical Data:
• Power source: 12V DC / 24V DC,
• Rated output power: combined 12A (sum of all connected outputs),
• Max load (e.g. Halogen lamps)
at 12V - 144W combined,
at 24V - 288W combined.
• Power consumption: < 0,3W,
• Radio frequency: 868,4 MHz EU; 908,4 MHz US; 921,4 MHz ANZ; 869,2 MHz RU,
• Antenna range: up to ca. 50 meters outdoor, or up to 30 meters inside
(depends on building structure),
• Outside dimmensions (L x W x H) 42mm x 36mm x 15mm.
12. Product Overview:
Fibaro Wall Plug, with power metering feature, is an intelligent, ultimate plug & play, most
sophisticated, extremely compact, remotely controlled outlet adapter. This highly functional wall
plug can be applied wherever there's a need to control electrical devices of maximum 2,5 kW
power output, while monitoring power consumption in a convenient and maintenance-free way.
Crystal LED ring informs about the current load of the connected appliance by visually changing
its colour.
Product Highlights:
• Current and historical power consumption measuring,
• Power consumption level visualisation with the use of crystal, colour changing, LED ring,
• Controlled through other Fibaro devices or any Z-Wave controller,
• Microprocessor controlled,
• Smallest device of the type in the world.
Fibaro Wall Plug
FGWPE-101
FGWPF-101 (Schuko)
13. Technical Data:
• Power Source 110 - 230 V AC ±10% 50/60Hz,
• Rated operational output voltage: 11A/230V AC 50/60Hz - continuous load,
• Power consumption: up to 0,8W,
• Output power for resistive loads: 2,5 kW continuous load,
• In accordance with UE standards: EN 55015 (noise)
EN 60669-2-1 (operational safety)
• Circuit temperature limit: 105°C,
• Operational temperature: 0 - 40 °C,
• For use with sockets
(Compatible with each EU plug:
- CEE 7/16 - max load. 2,5A;
- CEE 7/17 - max load 16A;
- and dual type plugs E/F),
• Radio protocol: Z-Wave,
• Radio frequency: 868,4 MHz EU,
• Antenna range: up to 50 m outdoors / up to 30 m indoors (depending on building materials),
• Dimensions (D x H): 43 x 65 mm.
Fibaro Wall Plug
FGWPE-101
FGWPF-101 (Schuko)
14. Product Overview:
The Fibaro Motion Sensor is a universal Z-Wave multi-sensor. Along with detecting motion the
device measures the temperature and light intensity. The sensor has a built-in accelerometer to
detect any tampering of the device.
The Fibaro Motion Sensor is battery powered device and designed to be installed quickly and
easily on any surface. The LED indicator signals motion, temperature level, operating mode and
can be used to see if device is within the Z-Wave network. The motion sensor can be used for
lighting scenes and security monitoring systems.
Product Highlights:
• Unique design
• Detects event the slightest motion and changes in temperature,
• One of a kind, earthquake detection functionality,
• Battery powered,
• Wireless communication via Z-Wave protocol,
• Features wireless software update.
Motion Sensor FGMS-001
15. Motion Sensor FGMS-001
Technical Data:
• Power Supply: CR123A battery, 3.6 VDC
• EU directive compliance: LVD 2006/95/WE; EMC 2004/108/WE; R&TTE 1999/5/WE; RoHS II
• Recommended installation height: 2,4m
• Operational Temperature: 0 - 40o
C*
• Measured Temperature Range: -20 to 100o
C
• Temperature Measuring Accuracy: 0,5o
C (within 0oC-40oC range)
• Light Intensity Measuring Range: 0 - 32000 LUX
• Radio Protocol: Z-Wave
• Radio Frequency: 869 MHz EU; 908 MHz US; 921 MHz ANZ; 869 MHz RU;
• Range: up to 50 m outdoors; up to 30 m indoors (depending on terrain and building structure)
16. Product Overview:
Fibaro Flood Sensor is a universal, Z-Wave compatible, flood and temperature sensor. Device
can be battery or VDC powered (12 or 24 VDC). Flood alarm is sent to the Z-Wave network
devices or additionally to any alarm system controller, through opening a NC contact.
The device has built in temperature sensor, monitoring temperature of e.g. floor. Fibaro Flood
Sensor is designed to be placed on the floor or on a wall with a flood sensors probe extended
by connected wire. The device has built in LED and sound alarm. In addtion, the sensor is equ-
ipped with a tilt sensor reporting tilt or movement to the main controller e.g. when the Sensor
has been taken by someone from it’s original location. LED diode signals flood, operating mode
or the Z-Wave network communication range. Fibaro Flood Sensor is sink-resistant, drifts on
the water sufrace and keeps on sending alarm signal in case of substantial inundation.
Product Highlights:
• Unique, floating design
• Detects flooding or fire
• Battery or VDC powered
• Communicates with a Z-Wave network or a wired alarm system
• Features wireless software update.
Flood Sensor FGFS-101
17. Flood Sensor FGFS-101
Technical Data:
• Power Supply: 12 - 24 VDC
• Battery Type: CR123A
• Power Consumption (at VDC operation): 0,4W
• Output terminals maximum current carrying capacity (ALARM NC, TAMP NC): 25mA
• Maximum voltage at output terminals: 40V (AC or DC)
• EU standards compliance: EMC 2004/108/EC, R&TTE 199/5/WE
• Radio protocol: Z-Wave
• Radio frequency: 868,4 MHz EU; 908,4 MHz US; 921,4 MHz ANZ; 869,2 MHz RU;
• Range: up to 50m outdoors
up to 30m indoors (depending on terrain and building structure)
• Operational Temperature: 0o
C - 40o
C
• Measured temperature range: -20o
C - 100o
C
• Temperature measuring accuracy: 0,5o
C (within 0o
C- 40o
C range)
• Dimensions (Diameter x Height): 72 mm x 28 mm
18. Product Overview:
Fibaro Smoke Sensor is a universal, Z-Wave compatible, optical smoke detector. The device
can be battery (battery life approx. 3 years) or alternatively VDC powered (12 or 24 VDC).
Smoke alarm is signaled by sound, LED diode blinking and through operating commands sent
to the Z-Wave network devices. Additionally, smoke alarm may be sent to an alarm system or
fire alarm system hub, through a NC contact terminals opening.
Optical detector allows for detecting smoke at an early stage of fire, often before flames appear
and temperature starts to rise significantly. Moreover the device has a built-in temperature
sensor, which can also trigger the alarm once the specified temperatute threshold is exceeded.
Fibaro Smoke Sensor is designed to be placed on a wall or ceiling. LED signaling diode signals
fire, operating mode and may serve as the Z-Wave network range controller. Sensor is desi-
gned to operate in confined spaces, under normal conditions (lacking smoke, dust, condensed
water vapor).
Product Highlights:
• Unique design, assuring detection of even the smallest amount of smoke
• Detects smoke presence or rapid temperature changes
• Battery or VDC powered
• Communicates with a Z-Wave network or a wired alarm system
• Features wireless software update.
Smoke Sensor FGSS-001
19. Smoke Sensor FGSS-001
Technical Data:
• Power Supply: 12 - 24 VDC
• Battery Type: CR123A
• Power Consumption (at VDC operation): 0,4W
• Output terminals maximum current carrying capacity (ALARM NC, TAMP NC): 25mA
• Maximum voltage at output terminals: 24V (AC or DC)
• EU standards compliance: EMC 2004/108/EC, R&TTE 199/5/WE
• Radio protocol: Z-Wave
• Radio frequency: 868,4 MHz EU; 908,4 MHz US; 921,4 MHz ANZ; 869,2 MHz RU;
• Range: up to 50m outdoors
up to 30m indoors (depending on terrain and building structure)
• Operational Temperature: 0o
C - 40o
C
• Measured temperature range: -20o
C - 100o
C
• Temperature measuring accuracy: 0,5o
C (within 0o
C- 40o
C range)
• Dimensions (Diameter x Height): 65 mm x 28 mm
20. Universal Binary Sensor FGBS-001
Product Overview:
The Universal Binary Sensor is a wireless module that makes it possible to improve the functio-
nality of any sensor with a binary output by allowing it to communicate with the wireless
network Z-WAVE and the FIBARO building intelligence system. Moreover, the module allows
for wireless communication between the system and the DS18B20 temperature sensors. The
device can service up to two binary sensors and up to four DS18B20 temperature sensors.
The Sensor was designed for installation in the housing of a sensor or another device, the func-
tionality of which we wish to improve.
The Universal Binary Sensor may be used whenever wireless collection of data from sensors is
required. Once additional safety housing have been installed, the Sensor can also be used in
areas with high humidity and high temperature. The Sensor’s main function is the integration of
the wireless FIBARO system with the existing wire-based and wireless alarm and measurement
systems. As an element of the safety system the device is transparent for parametric alarm
lines.
Product Highlights:
• Controlled with FIBARO system devices or any Z-Wave controller
• Microprocessor-based control
• Compatible with regular and parametric alarm lines
(can be connected to 2 alarm detectors)
• Compatible with binary sensors
(can be connected to 2 binary outputs)
• Compatible with DS18B20 temperature sensors
(can be connected to four DS18B20 temperature sensors)
21. Technical Data:
• Supply voltage: 9-30V DC ±10%
• Input: 2 potential-free inputs, 1 digital input 1-wire
• Output: 2 potential-free outputs
• Maximum current carrying capacity of outputs: 150mA
• Maximum voltage at output contacts: 36V DC / 24V AC ±5%
• Operating temperature: 0 - 40 °C
• Number of servicing temperature sensors: 4
• Measurement range: -55 °C - +126 °C
• Radio protocol: Z-Wave
• Radio frequency: 868,4 MHz EU; 908,4 MHz US; 921,4 MHz ANZ; 869,2 MHz RU,
• Range: up to 30 m in buildings (depending on the construction materials)
up to 50 m in the field
• Dimensions (L x W x H): 14.5 x 27.3 x 12 mm
Universal Binary Sensor FGBS-001
22. Product Overview:
The Fibaro Door / Window Sensor is a battery powered, Z-Wave compatible reed sensor. The
Fibaro Door / Window Sensor detects the doors, windows, garage gates, roller blinds etc devi-
ces opening, through detaching its two elements. Every time two elements of the Sensor
detach, the Sensor sends a signal to the Z-Wave network main controller.
This may be used in scenes, but also in alarm and monitoring systems.
In addition, The Fibaro Door / Window Sensor may be connected to a DS18B20 temperature
sensor, and has one additional input.
Product Highlights:
• Controlled with Fibaro System devices or any Z-Wave controller,
• Radio signal is sent each time both parts of the Door / Window Sensor separate,
• Easily mounted on doors, windows, gates, blinds,
• Compatible with DS18B20 temperature sensors,
• May be connected to a switch, via IN input.
Colour options:
FGK-101 FGK-102 FGK-103 FGK-104 FGK-105 FGK-106 FGK-107
Door / Window Sensor FGK-101 - 107
23. Technical Data:
• powered by single ER14250 battery,
• inputs - single, IN
• number of DS sensors supported - 1
• ambient temperature - 0 - 40o
C
• radio frequency - 868,4 MHz EU; 908,4 MHz US; 921,4 MHz AU/NZ; 869,2 MHz RU,
• operating range - up to 30 m indoors; up to 50 m outdoors,
• dimensions (L x W x H): 76 x 17 x 19 mm
Door / Window Sensor FGK-101 - 107
24. Bypass Fibaro FGB-001
Product Overview:
Bypass Fibaro is a device complementary to Fibaro Dimmer FGD211. Its installation makes
possible to dim light sources with minimum power consumption, such as e.g. single 0,5Watt
LED. Please note it is possible to dim only light sources clearly marked as dimmable.
Product Highlights:
• Power source: 230V +/-10% 50Hz
• Overheating protection: safety off at 105o
C,
• To be mounted in standard, wall switch boxes Ø ≥ 50 mm,
• Outside dimmensions (L x W x H) - 17mm x 18mm x 8,3mm.