The document summarizes the EdgeReader ERP40, an IP access solution that combines an access controller and host interface in a single unit with an integrated multiCLASS contactless smart card reader. It provides network access over CAT-5 cable and Power over Ethernet, eliminating the need for separate power supplies. It stores up to 44,000 cards onsite with a built-in TCP/IP interface and supports various card technologies. Key features include network connectivity, onboard processing and storage, input/output options and support for access control functions.
The EdgeReader ER40 is an IP access control solution that combines a controller and host interface in a single unit with an integrated iCLASS reader. It provides network access over CAT-5 cable and Power over Ethernet, eliminating separate power supplies. It stores up to 44,000 cards and controls all access functions at the door.
The EdgeReader ERW400 is an IP-enabled intelligent access control reader with integrated iCLASS read/write capabilities. It provides full access control functionality at the door with a single unit, eliminating the need for separate power supplies or central controllers. Key features include storing up to 44,000 cards on device, PoE support, and integration capabilities with various host systems using TCP/IP. It is designed for use in new building installations to reduce wiring while controlling all access functions locally.
The document summarizes the EdgeReader Solo ESRP40, a stand-alone IP access control solution for a single door. It has an integrated multiCLASS reader, supports remote management via a web browser, and provides security through SSL and TLS. It reads various card technologies, supports various features like schedules and reports, and has inputs/outputs to interface with other devices.
The document describes the HID EdgePlus Solo ES400, a stand-alone IP access control solution that provides network connectivity and remote management capabilities. It connects to various card readers and manages up to 1000 users. Features include a web-based interface for administration without additional software, support for multiple languages and data backup/restore. It provides an affordable way to migrate existing reader installations to network access control.
The VertX V100 Door/Reader Interface connects two access control card readers and controls one or two doors. It features on-board flash memory for program updates, connects to the V1000 host controller via RS-485, and the V1000 communicates with the host system via TCP/IP. The V100 processes access control decisions locally and reports all activity to the V1000.
The document summarizes the VertX V200 input monitor interface, which connects up to 16 supervised input circuits for alarm systems. It reports the status of input points and connects to the V1000 interface over RS-485. The V200 has flash memory for firmware updates, LED indicators, terminal connectors, and an enclosure that protects its components.
The VertX Access Controllers are network controllers that connect to two access control card readers and control one or two doors. They store access control databases for up to 44,000 cardholders and connect to host software applications over Ethernet to process access requests in real-time. The V2000 model uses a 32-bit processor, has inputs/outputs for doors, alarms and power monitoring, and communicates over TCP/IP.
The VertX V1000 is a network controller that provides access control processing and interfaces for up to 32 doors/readers. It has a 32-bit RISC processor, 8MB flash memory, stores access control data for up to 64 doors and 44,000 cardholders, and connects to host software and devices via TCP/IP. It processes commands, reports activity, and controls connected devices like doors and readers.
The EdgeReader ER40 is an IP access control solution that combines a controller and host interface in a single unit with an integrated iCLASS reader. It provides network access over CAT-5 cable and Power over Ethernet, eliminating separate power supplies. It stores up to 44,000 cards and controls all access functions at the door.
The EdgeReader ERW400 is an IP-enabled intelligent access control reader with integrated iCLASS read/write capabilities. It provides full access control functionality at the door with a single unit, eliminating the need for separate power supplies or central controllers. Key features include storing up to 44,000 cards on device, PoE support, and integration capabilities with various host systems using TCP/IP. It is designed for use in new building installations to reduce wiring while controlling all access functions locally.
The document summarizes the EdgeReader Solo ESRP40, a stand-alone IP access control solution for a single door. It has an integrated multiCLASS reader, supports remote management via a web browser, and provides security through SSL and TLS. It reads various card technologies, supports various features like schedules and reports, and has inputs/outputs to interface with other devices.
The document describes the HID EdgePlus Solo ES400, a stand-alone IP access control solution that provides network connectivity and remote management capabilities. It connects to various card readers and manages up to 1000 users. Features include a web-based interface for administration without additional software, support for multiple languages and data backup/restore. It provides an affordable way to migrate existing reader installations to network access control.
The VertX V100 Door/Reader Interface connects two access control card readers and controls one or two doors. It features on-board flash memory for program updates, connects to the V1000 host controller via RS-485, and the V1000 communicates with the host system via TCP/IP. The V100 processes access control decisions locally and reports all activity to the V1000.
The document summarizes the VertX V200 input monitor interface, which connects up to 16 supervised input circuits for alarm systems. It reports the status of input points and connects to the V1000 interface over RS-485. The V200 has flash memory for firmware updates, LED indicators, terminal connectors, and an enclosure that protects its components.
The VertX Access Controllers are network controllers that connect to two access control card readers and control one or two doors. They store access control databases for up to 44,000 cardholders and connect to host software applications over Ethernet to process access requests in real-time. The V2000 model uses a 32-bit processor, has inputs/outputs for doors, alarms and power monitoring, and communicates over TCP/IP.
The VertX V1000 is a network controller that provides access control processing and interfaces for up to 32 doors/readers. It has a 32-bit RISC processor, 8MB flash memory, stores access control data for up to 64 doors and 44,000 cardholders, and connects to host software and devices via TCP/IP. It processes commands, reports activity, and controls connected devices like doors and readers.
The miniDSP Balanced Kit is a low cost, low power digital signal processor with balanced audio inputs and outputs. It features a 28/56-bit DSP engine, 24-bit ADC/DAC conversion, I2S connectivity, and audio processing plugins. The kit provides flexible digital signal processing for applications like equalization, crossovers, mixing and more. It is a small but powerful solution for custom pro audio and home audio projects.
The VertX V300 is an access control interface that contains 12 latching relays to control up to 12 devices through simple contact closures. It connects over RS-485 to the V1000 controller, which then communicates with the host system over TCP/IP. The V300 has on-board flash memory for firmware updates, and monitors auxiliary inputs and relay status, reporting activity back to the V1000.
The document describes the R6000 range of intelligent addressable rack mounted control panels from Cooper Lighting and Safety. The R6000 consists of modular plug-in components that can be configured for functions like fire detection, alarm signaling, and plant control. The system supports up to 126 panels, 504 loops, and 64,512 addressable points. The floor rack unit houses the R6000 control panels and is constructed of mild steel.
The PRS-CSR is a remote call station that connects to a Praesideo network via CAT-5 cable up to 1 km long. It uses standard Praesideo keypads and interfaces with the network through a PRS-CSI unit. The remote call station provides the same functionality as a basic call station and can be powered via CAT-5 cable or a local power supply.
This document provides an overview of Phoenix Contact's solutions for reducing costs associated with control panel design and assembly. It describes how Phoenix Contact's VARIOFACE Professional terminal blocks, interface modules, industrial cables, and power distribution modules can help achieve space, labor, and wiring cost savings compared to traditional control panel design. It also summarizes Phoenix Contact's offerings for PLC systems cabling, analog signal conditioning, motor starters, power supplies, switches, and wireless connectivity solutions and the benefits they provide for industrial applications.
This document provides information on ATEX/IECEx certified PowerPlex panelboards for use in hazardous locations. Key details include:
- The panelboards are rated for Zone 1 and 2 hazardous areas and certified to ATEX and IECEx standards.
- They feature individual breaker housings to allow for easy servicing without downtime, and fiberglass reinforced polyester enclosures.
- The catalog number guide provides steps for selecting panel configuration including main breaker size, number of branch circuits, breaker ratings and options.
- Standard panel arrangements accommodate 1 to 72 branch circuits in various configurations depending on breaker pole size.
The document describes the AMP1-S8-3G 8-channel audio monitor, which provides premium quality monitoring of analog, AES/EBU, and 3G/HD/SD-SDI audio formats. It features 8 LED bar graph meters, focused sound through 3 speakers, and magnetic shielding. The compact monitor is well-suited for space-critical environments like studios and mobile production vehicles.
The LBB 4433/00 Call Station Kit allows for custom call stations with 16 keypads. It has a built-in speech filter and limiter for clear audio, supports redundant networking, and can make emergency calls even if the network controller fails. The kit includes connectors and can be extended with numeric keypads.
The VS-41HD is a 1U 4x1:2 HD-SDI video switcher that can switch between 4 HD-SDI video inputs and output 2 identical signals. It supports SDI and HD-SDI standards up to 1.485Gbps and can switch between inputs on the front panel, via RS-232, Ethernet, or infrared remote control. The switcher provides equalization and reclocking to send signals over longer distances and has front panel input indication for easy signal monitoring.
The VS-41HD is a 1U 4x1:2 HD-SDI video switcher that can switch between 4 HD-SDI video inputs and output 2 identical signals. It supports SDI and HD-SDI video standards up to 1.485Gbps and provides flexible control options including front panel, RS-232, RS-485, Ethernet, IR remote, and contact closure. The switcher features Kramer equalization and re-clocking technology to support longer cable runs and includes indicators for input signal detection.
The IntelliKnight 5808 is a single loop, addressable fire alarm control panel that provides 127 detection points and integrated communication capabilities. It performs self-diagnostics on connected sensors and includes features like drift compensation. The basic panel can be expanded with additional modules. Notifications are powered by the onboard 6A power supply or an optional expansion module.
The ITC-100 intercom system provides 8-way communication between production crews. It features a standard 19" rack design for easy integration. The system allows the producer to select individual or broadcast communication to all channels simultaneously and includes tally light indicators. It is supplied with belt pack accessories to enable communication between camera operators and directors up to 200 meters away.
The Fibaro Z-Wave modules are small electronic modules compatible with any Z-Wave home automation system. They can be installed in standard wall switch boxes in just 3 minutes using a screwdriver. The Home Center 2 and Home Center Lite are Z-Wave gateways with fast processors, remote access, and backup systems to securely manage connected devices. The Fibaro modules described include dimmers, roller shutters, and relay switches to control lights, motors, and other devices remotely.
MiniDSP is a small, low-cost digital signal processing device that can be configured for various audio applications through software. It has a 28/56-bit DSP, 24-bit ADC/DAC, and I/O including RCA, USB power, and expansion headers. MiniDSP packs graphic equalizers, mixers, filters, and other audio processing into a compact package at a fraction of the cost of other solutions, while maintaining high audio quality. It is intended to be a flexible platform for applications like digital crossover, effects processing, and custom audio projects.
This document provides product specifications for the Vizia RF + Scene Capable Receptacle, which replaces a regular wall receptacle to allow for wireless ON/OFF control of electrical devices plugged into the receptacle. It can be controlled remotely using Vizia RF + Controllers or other Z-Wave controllers. The receptacle provides features such as scene control of multiple lights with one button, wireless mesh networking, a tamper-resistant design, transient surge protection, and compatibility with home automation systems. It is designed for residential use in applications up to 7,500 square feet with 128 devices or less.
This servo drive operates in torque, velocity, or position mode. It features a CANopen interface, configurable digital and analog inputs/outputs, and supports various feedback types including encoders. The drive complies with relevant safety standards and has a peak current of 30A and continuous current of 15A.
The document summarizes iCLASS RW100, RW150, RW300, and RW400 readers that provide 13.56 MHz contactless smart card read/write capabilities. The readers support applications like biometric authentication, time and attendance, and cashless vending. They have a flexible serial protocol that exposes reader functionality. The readers also allow for firmware upgrades and support multiple hardware protocols.
Castlestone Intelligent Technology (Shanghai) Co.,Ltd is an RFID solutions provider located in Shanghai, China. They offer a wide range of RFID tags and labels including RFID cards, wristbands, windshield tags, inlays, and more. The tags and labels are made from materials like PVC, PET and silicone and can be customized with features like printing, encoding and chip options. Castlestone provides RFID products for applications across various industries including access control, asset management, logistics and more.
The document outlines an electronic access control workshop focusing on attacking NFC and RF-based systems. It discusses the history and components of access control systems, including tokens, readers, controllers and backends. Specific NFC card technologies like MIFARE Classic, MIFARE Ultralight and HID iClass are examined, noting many have been broken or have shared encryption keys. The document then proposes a methodology for penetration testing NFC access systems and reviews tools like HydraNFC, ProxMark3 and ChameleonMini that can emulate NFC cards or sniff RF transmissions.
Electronic Access Control Security / Безопасность электронных систем контроля...Positive Hack Days
Ведущий: Маттео Беккаро
Мастер-класс посвящен эксплуатации уязвимостей электронных систем контроля доступа. Ведущий расскажет о наиболее распространенных технологиях, их уязвимостях и возможных способах атаки. Участникам, которым удастся провести атаку, достанутся аппаратные гаджеты Opposing Force.
This seminar presents an overview of networking and local connectivity of Java ME platform: HTTP, Sockets, Datagrams, messaging, Bluetooth, serial and RFID.
The miniDSP Balanced Kit is a low cost, low power digital signal processor with balanced audio inputs and outputs. It features a 28/56-bit DSP engine, 24-bit ADC/DAC conversion, I2S connectivity, and audio processing plugins. The kit provides flexible digital signal processing for applications like equalization, crossovers, mixing and more. It is a small but powerful solution for custom pro audio and home audio projects.
The VertX V300 is an access control interface that contains 12 latching relays to control up to 12 devices through simple contact closures. It connects over RS-485 to the V1000 controller, which then communicates with the host system over TCP/IP. The V300 has on-board flash memory for firmware updates, and monitors auxiliary inputs and relay status, reporting activity back to the V1000.
The document describes the R6000 range of intelligent addressable rack mounted control panels from Cooper Lighting and Safety. The R6000 consists of modular plug-in components that can be configured for functions like fire detection, alarm signaling, and plant control. The system supports up to 126 panels, 504 loops, and 64,512 addressable points. The floor rack unit houses the R6000 control panels and is constructed of mild steel.
The PRS-CSR is a remote call station that connects to a Praesideo network via CAT-5 cable up to 1 km long. It uses standard Praesideo keypads and interfaces with the network through a PRS-CSI unit. The remote call station provides the same functionality as a basic call station and can be powered via CAT-5 cable or a local power supply.
This document provides an overview of Phoenix Contact's solutions for reducing costs associated with control panel design and assembly. It describes how Phoenix Contact's VARIOFACE Professional terminal blocks, interface modules, industrial cables, and power distribution modules can help achieve space, labor, and wiring cost savings compared to traditional control panel design. It also summarizes Phoenix Contact's offerings for PLC systems cabling, analog signal conditioning, motor starters, power supplies, switches, and wireless connectivity solutions and the benefits they provide for industrial applications.
This document provides information on ATEX/IECEx certified PowerPlex panelboards for use in hazardous locations. Key details include:
- The panelboards are rated for Zone 1 and 2 hazardous areas and certified to ATEX and IECEx standards.
- They feature individual breaker housings to allow for easy servicing without downtime, and fiberglass reinforced polyester enclosures.
- The catalog number guide provides steps for selecting panel configuration including main breaker size, number of branch circuits, breaker ratings and options.
- Standard panel arrangements accommodate 1 to 72 branch circuits in various configurations depending on breaker pole size.
The document describes the AMP1-S8-3G 8-channel audio monitor, which provides premium quality monitoring of analog, AES/EBU, and 3G/HD/SD-SDI audio formats. It features 8 LED bar graph meters, focused sound through 3 speakers, and magnetic shielding. The compact monitor is well-suited for space-critical environments like studios and mobile production vehicles.
The LBB 4433/00 Call Station Kit allows for custom call stations with 16 keypads. It has a built-in speech filter and limiter for clear audio, supports redundant networking, and can make emergency calls even if the network controller fails. The kit includes connectors and can be extended with numeric keypads.
The VS-41HD is a 1U 4x1:2 HD-SDI video switcher that can switch between 4 HD-SDI video inputs and output 2 identical signals. It supports SDI and HD-SDI standards up to 1.485Gbps and can switch between inputs on the front panel, via RS-232, Ethernet, or infrared remote control. The switcher provides equalization and reclocking to send signals over longer distances and has front panel input indication for easy signal monitoring.
The VS-41HD is a 1U 4x1:2 HD-SDI video switcher that can switch between 4 HD-SDI video inputs and output 2 identical signals. It supports SDI and HD-SDI video standards up to 1.485Gbps and provides flexible control options including front panel, RS-232, RS-485, Ethernet, IR remote, and contact closure. The switcher features Kramer equalization and re-clocking technology to support longer cable runs and includes indicators for input signal detection.
The IntelliKnight 5808 is a single loop, addressable fire alarm control panel that provides 127 detection points and integrated communication capabilities. It performs self-diagnostics on connected sensors and includes features like drift compensation. The basic panel can be expanded with additional modules. Notifications are powered by the onboard 6A power supply or an optional expansion module.
The ITC-100 intercom system provides 8-way communication between production crews. It features a standard 19" rack design for easy integration. The system allows the producer to select individual or broadcast communication to all channels simultaneously and includes tally light indicators. It is supplied with belt pack accessories to enable communication between camera operators and directors up to 200 meters away.
The Fibaro Z-Wave modules are small electronic modules compatible with any Z-Wave home automation system. They can be installed in standard wall switch boxes in just 3 minutes using a screwdriver. The Home Center 2 and Home Center Lite are Z-Wave gateways with fast processors, remote access, and backup systems to securely manage connected devices. The Fibaro modules described include dimmers, roller shutters, and relay switches to control lights, motors, and other devices remotely.
MiniDSP is a small, low-cost digital signal processing device that can be configured for various audio applications through software. It has a 28/56-bit DSP, 24-bit ADC/DAC, and I/O including RCA, USB power, and expansion headers. MiniDSP packs graphic equalizers, mixers, filters, and other audio processing into a compact package at a fraction of the cost of other solutions, while maintaining high audio quality. It is intended to be a flexible platform for applications like digital crossover, effects processing, and custom audio projects.
This document provides product specifications for the Vizia RF + Scene Capable Receptacle, which replaces a regular wall receptacle to allow for wireless ON/OFF control of electrical devices plugged into the receptacle. It can be controlled remotely using Vizia RF + Controllers or other Z-Wave controllers. The receptacle provides features such as scene control of multiple lights with one button, wireless mesh networking, a tamper-resistant design, transient surge protection, and compatibility with home automation systems. It is designed for residential use in applications up to 7,500 square feet with 128 devices or less.
This servo drive operates in torque, velocity, or position mode. It features a CANopen interface, configurable digital and analog inputs/outputs, and supports various feedback types including encoders. The drive complies with relevant safety standards and has a peak current of 30A and continuous current of 15A.
The document summarizes iCLASS RW100, RW150, RW300, and RW400 readers that provide 13.56 MHz contactless smart card read/write capabilities. The readers support applications like biometric authentication, time and attendance, and cashless vending. They have a flexible serial protocol that exposes reader functionality. The readers also allow for firmware upgrades and support multiple hardware protocols.
Castlestone Intelligent Technology (Shanghai) Co.,Ltd is an RFID solutions provider located in Shanghai, China. They offer a wide range of RFID tags and labels including RFID cards, wristbands, windshield tags, inlays, and more. The tags and labels are made from materials like PVC, PET and silicone and can be customized with features like printing, encoding and chip options. Castlestone provides RFID products for applications across various industries including access control, asset management, logistics and more.
The document outlines an electronic access control workshop focusing on attacking NFC and RF-based systems. It discusses the history and components of access control systems, including tokens, readers, controllers and backends. Specific NFC card technologies like MIFARE Classic, MIFARE Ultralight and HID iClass are examined, noting many have been broken or have shared encryption keys. The document then proposes a methodology for penetration testing NFC access systems and reviews tools like HydraNFC, ProxMark3 and ChameleonMini that can emulate NFC cards or sniff RF transmissions.
Electronic Access Control Security / Безопасность электронных систем контроля...Positive Hack Days
Ведущий: Маттео Беккаро
Мастер-класс посвящен эксплуатации уязвимостей электронных систем контроля доступа. Ведущий расскажет о наиболее распространенных технологиях, их уязвимостях и возможных способах атаки. Участникам, которым удастся провести атаку, достанутся аппаратные гаджеты Opposing Force.
This seminar presents an overview of networking and local connectivity of Java ME platform: HTTP, Sockets, Datagrams, messaging, Bluetooth, serial and RFID.
The document describes a Near-Field Communication (NFC) system designed by Group 31. The NFC system uses Frequency Shift Keying (FSK) to transmit data between devices over short ranges using magnetic field induction. It consists of a transmitter with a VCO modulated by a PC interface, and a receiver with an amplifier, loop antenna, and PLL for demodulation. The design achieves data rates of 800kbps over ranges of 30cm, within FCC regulations for non-radiative wireless technologies.
Basic of MODBUS Communication/ProtocolShivam Singh
Shivam Singh is a project engineer who provides his contact information. The document discusses MODBUS, an application layer messaging protocol that provides client/server communication between devices. MODBUS can operate over serial lines or TCP/IP networks and uses function codes to specify request and response transactions. It describes the MODBUS protocol data unit structure, addressing model, and typical network architecture with MODBUS clients, servers, and gateways connecting different device types and networks.
This document compares the TRF7960 and TRF7970A RFID/NFC reader ICs. It outlines features that are common to both, such as pin assignments and protocol support. It then describes limitations of the TRF7960 for ISO14443A operations and the changes made in the TRF7970A to address these, including improvements to decoders, more flexible collision detection, and support for 4-bit replay and same Select code frames. Special function registers are also discussed which allow enabling new TRF7970A capabilities.
Show different Standards as ECMA 340 and 352. Talks about security problems and solutions. Shows ECMA 385 and 386 as a SSE & SCH services for p2p mode.
As conclusions:
NFC by itself cannot provide protection against eavesdropping or data modification. The solution is the establishment of a secure channel over NFC. Since Man in the Middle attacks are unfeasible, a Diffie- Heffman cryptography can be applied. NFC-SEC standard uses ECDH crypto and AES algorithm.
The document summarizes smart card technology and standards for secure ID applications. It discusses primary standards like ISO 7816 and how standards apply to interfaces and platforms. It covers security standards and challenges, as well as specifications for interoperability. Industry specifications for applications in areas like GSM and EMV are also referenced. The document provides overviews of how smart card technology can be used for logical and physical security, describing the role smart cards play in ID systems. It also discusses technology availability and challenges facing the secure identification industry.
This document provides information about an RFID application system including:
1. An overview of the system block diagram and key components like the microcontroller and RFID reader module.
2. An example program flow chart and descriptions of programs used in the development process.
3. Instructions for connecting the system and examples of experiments that can be run using the example programs.
NFC is a short-range wireless technology that allows for intuitive communication between devices within 10 cm of each other. It uses 13.56 MHz RFID technology to enable easy, secure transmission of data with speeds up to 424 kb/s. NFC provides advantages over other wireless technologies for applications such as mobile payments, ticketing, and pairing due to its low power usage and convenience of simply touching two devices together to communicate.
This document discusses how RFID and NFC technologies can provide connectivity for the Internet of Things (IoT) over short distances. It outlines CISC Semiconductor's role in developing RFID and NFC standards through organizations like ISO, EPCglobal, and NFC Forum. The document also describes the importance of conformance, performance, and interoperability testing to ensure different RFID and NFC devices can reliably communicate and interact as required.
NFC and consumers - Success factors and limitations in retail business - Flor...Florian Resatsch
Shown at the WIMA 2007 in Monaco, this presentation covers ideas and discussions around frequencies for retail business. Consumer applications with NFC are also discussed.
ASK provides contactless terminals and readers for various industries including transportation, access control, and banking. Their product lines include OEM couplers, desktop readers, contactless modules, and contactless terminals. ASK has been developing contactless technology expertise since 1997 and their readers are recognized for top performance and universal card acceptance.
This is a presentation, which lists technical facts about two different types of air interface for contactless proximity smartcards. Similar type of interfaces are used for RFID tag reader communication. This presentation highlights some of the features of Type A and Type B communication to bring out the differences between each of them.
NFCRFID Ripe for Application Expansion_ElectronicDesignHamed M. Sanogo
The document discusses near-field communication (NFC) and radio-frequency identification (RFID) technologies. It describes how NFC/RFID works using inductive coupling between a reader and passive tag. It then discusses how the MAX66242 integrated circuit can provide security features, energy harvesting capabilities, and an I2C interface to enable NFC/RFID in embedded applications. Examples of applications discussed include medical sensor tags, device configuration, and collecting diagnostic/error data wirelessly.
The ThinLine II Reader is a low profile proximity card reader housed in a weatherproof two-piece enclosure. It has a read range of up to 5.5 inches for most card types and interfaces with access control systems using Wiegand or Clock-and-Data protocols. The reader has audiovisual indicators, onboard diagnostics, and a lifetime warranty against defects.
The ThinLine II Reader is a low profile proximity card reader housed in a weatherproof two-piece enclosure. It has a read range of up to 5.5 inches for most card types and interfaces with access control systems using Wiegand or Clock-and-Data protocols. The reader has audiovisual indicators, environmental hardening, and a lifetime warranty against defects.
The document describes the EdgePlus E400 networked access control solution. It has the following key features:
- Manages up to 44,000 cardholders from a host system and stores the access control database at the door.
- Provides network connectivity for existing or new Wiegand or HID readers using standard CAT5 cabling for both data and power over Ethernet.
- Puts access control and interface capabilities directly at the door for retrofits or new installations with less wiring.
- Interfaces with various card technologies and controls access devices and doors at the edge of the network.
The document describes the EdgePlus E400 networked access control solution. It has the following key features:
- Manages up to 44,000 cardholders from a host system and stores the access control database at the door.
- Provides network connectivity for existing or new Wiegand or HID readers using standard CAT5 cabling for both data and power.
- Puts the access control processor and host interface directly at the door for retrofits or new installations with less wiring.
The VS-81ETH is a bidirectional switcher that can switch any one of eight twisted pair cable inputs to a single output. It has a bandwidth of 3Gbps and can switch signals up to 100 meters. The switcher has eight RJ-45 inputs and one RJ-45 output and can be controlled via front panel buttons, RS-232, RS-485, Ethernet, contact closure or an included IR remote control.
The VS-81HDxl is a 1U rack-mountable 8x1:2 3G HD-SDI switcher that can switch between eight 3G, HD, or SD-SDI video inputs and output to two identical outputs. It supports data rates up to 2.97Gbps and features Kramer equalization and re-clocking technology, active input type reporting, flexible control options including front panel, RS-232, RS-485, Ethernet, contact closure and infrared remote control.
The VS-81HDxl is a 1U rack-mountable 8x1:2 3G HD-SDI switcher that can switch between eight 3G, HD, or SD-SDI video inputs and output to two identical outputs. It supports data rates up to 2.97Gbps and features Kramer equalization and re-clocking technology, active input type reporting, flexible control options including front panel, RS-232, RS-485, Ethernet, contact closure and infrared remote control.
The document summarizes the Cooper CF1000VDS range of intelligent addressable fire alarm control panels. Key points:
- The CF1000VDS range includes 1-loop and 2-loop control panels approved to EN54 standards.
- The panels offer up to 200 addresses per loop, network capability up to 126 panels, and features like soft addressing and a touchscreen user interface.
- Benefits include simple operation, flexible network and programming capabilities, and compatibility with a range of accessories.
The ComNet CopperLine CLFE8IPS and CLFE16IPS are 8-port and 16-port high-power Power over Ethernet mid-span injectors that deliver up to 37W per port simultaneously without power management. They are compatible with 10/100/1000 Base-T Ethernet networks and meet IEEE 802.3af and 802.3at PoE standards. The mid-span injectors have LED indicators and can be easily installed in 19-inch racks, making them ideal for powering devices like IP cameras, wireless access points and VoIP phones from a central LAN switch.
The AIR-AP1542I-E-K9 is a rugged, outdoor 802.11ac Wave 2 access point with integrated dual-band antennas. It supports speeds up to 867Mbps and features a compact design for flexible deployment. Specifications include 2x2 MIMO, PoE support, an operating temperature range of -40°C to 65°C, and wind resistance up to 100mph. The document provides detailed technical specifications and contact information for purchasing the access point.
This document summarizes the features and specifications of the ProxPoint Plus Reader, a proximity card reader that can read cards up to 3 inches away. It has an audiovisual indicator with LED and beeper, can be mounted on metal, and is available with Wiegand or clock-and-data output. It is designed for indoor and outdoor use with an IP55-rated polycarbonate enclosure and operates between -30 to 65 degrees Celsius.
Durability, availability and performance reliability are the qualities that best describe the RUGGEDCOM RSG2100 / RSG2100P 32-port Ethernet switch – whether configured with 4 modular Gigabit uplink ports and 128-bit encryption or to support Power-over-Ethernet.
The T3 PowerBroadband system provides power and broadband connectivity over existing telephone wires. It uses patented Adaptive Line Power to deliver up to 75Mbps connectivity and power to WallPlates up to 2,000 feet from a central T3 Switch. The system supports both Ethernet and 802.11 wireless networks through WallPlates to enable revenue-generating services like high-speed internet, IPTV, and VOIP without requiring electrical outlets. It can be managed through an intuitive web-based interface and integrates with network management systems.
The document summarizes a 125 kHz proximity card reader called the ProxPro Reader. It has a weatherproof design suitable for indoor or outdoor use. It can read cards at a range of up to 8 inches and interfaces with access control systems using Wiegand or clock-and-data protocols. The reader has features like an LED indicator, internal beeper, and optional keypad. It is designed to be durable and reliable for access control applications.
The document summarizes a 125 kHz proximity card reader called the ProxPro Reader. It has a weatherproof design suitable for indoor or outdoor use. It can read cards at a range of up to 8 inches and interfaces with access control systems using Wiegand protocol. It has features like multicolor LED indicator, internal beeper, and optional keypad.
The document summarizes a 125 kHz proximity card reader called the ProxPro Reader. It has a weatherproof design suitable for indoor or outdoor use. It can read cards at a range of up to 8 inches and interfaces with access control systems using Wiegand protocol. It has features like an LED indicator, internal beeper, and optional keypad.
The document is a datasheet for the Cisco Aironet 1560 Series Outdoor Access Point model AIR-AP1562E-Z-K9. It provides an overview of the access point's key features and specifications, including its support for 802.11ac Wave 2 standards, external antenna connectivity, ruggedized design for outdoor deployment, and powering options including PoE. The datasheet also lists full technical specifications for the access point such as frequency bands, interface types, environmental tolerances, power consumption and warranty information.
The Cisco Aironet 1540 Series access point provides 802.11ac Wave 2 Wi-Fi in a rugged housing for outdoor deployment. It has integrated dual-band antennas, Gigabit Ethernet and power over Ethernet interfaces, and supports data rates up to 867 Mbps. The document provides specifications for the AIR-AP1542I-K-K9 model, including its regulatory domains, antenna types, power levels, environmental tolerances, dimensions and weight.
The document describes the R6000 range of intelligent addressable rack mounted control panels from Cooper Lighting and Safety. The R6000 consists of modular plug-in components that can be configured for functions like fire detection, alarm signaling, and plant control. The system allows up to 126 panels to be networked together and provides flexible programming and expansion capabilities. The floor rack unit houses the R6000 control panels and is constructed of mild steel.
The Cisco Aironet 1540 Series is an outdoor Wi-Fi access point that offers the latest 802.11ac Wave 2 wireless networking standard in a rugged and compact housing. It provides fast wireless connectivity for outdoor mobile devices and wireless backhaul. Key features include dual-band 802.11ac 2x2 MIMO with data rates up to 867Mbps, an integrated vertical antenna, rugged design for outdoor deployment, and support for the Z regulatory domain. The AIR-AP1542I-Z-K9 model discussed has these features and is powered by 802.3at PoE or Cisco power injectors.
The document summarizes the specifications and features of the Texecom Odyssey 3 external sounder and strobe series. Key features include a 115dB volume, IP65 sealed electronics, selectable SAB/SCB mode, screw, lid, and wall tamper protection, twin alternating LEDs, and revolutionary screw retention system. It is competitively priced, easy to install, and provides uncompromising performance for professional security installations.
The document describes the TOA VM-3000 series integrated voice evacuation system. It is an EN 54 compliant system that combines emergency voice alarm and public address functions. Key features include fully digital audio processing and control, built-in voice messages, monitoring of speaker lines, and support for paging, background music, and microphone inputs. The system is suitable for small to medium venues and provides emergency evacuation and general announcement capabilities.
The document describes the TOA VM-3000 series integrated voice evacuation system. The VM-3000 series provides both emergency evacuation functions and general public address/paging functions. It is EN 54 certified and ideal for small to medium venues. The system has integrated amplifiers, supports up to 60 speaker zones, and can be configured via software.
This document provides installation instructions for installing a SV-200MA Surveillance Board in VM-2120 or VM-2240 amplifiers. The SV-200MA adds monitoring, zone control, and backup amplifier functions. It consists of an SV-200M board and SV extension board. The 10 step installation process includes setting jumpers, connecting cables between the boards, mounting the surveillance board, and replacing the amplifier cover.
The document describes TOA's SC Series Paging Horn Speakers. It includes specifications for 6 models that are rated at either 10W, 15W, or 30W and are designed for both indoor and outdoor use. The speakers feature weatherproof stainless steel brackets, powder coated horns, and input impedance selector switches on high-impedance models. Diagrams show the speakers' frequency responses, beamwidths, directivity factors, and polar responses.
The document describes TOA's SC Series Paging Horn Speakers. It includes specifications for 6 models that are rated at either 10W, 15W, or 30W and are designed for both indoor and outdoor use. The speakers feature weatherproof stainless steel brackets, powder coated horns, and input impedance selector switches on high-impedance models. Diagrams show the speakers' frequency responses, beamwidths, directivity factors, and polar responses.
The document describes TOA's CS-154 and CS-304 outdoor wide-range speakers. The speakers use wide-range horns to provide high quality background music or paging announcements over a wide area. They are designed for outdoor use and have weatherproof enclosures that can withstand demanding environmental conditions. The speakers have adjustable impedance settings and provide high output with increased efficiency through the use of a horn and cone speaker combination.
The document describes the TOA BS-678 wall mount speaker system. It is a double-cone speaker with a wooden cabinet and stylish, compact design. It produces high quality sound for background music and announcements. Key features include an adjustable input impedance selector, push-in connector for easy wiring, and horizontal or vertical mounting orientation. Specifications include a frequency response of 150-20,000Hz, 6W or 3W power handling, and an off-white finish.
The document describes the TOA BS-633A/633AT wall mount speaker systems. The BS-633A is a basic 5" cone speaker with a transformer allowing multiple power taps. The BS-633AT includes an additional built-in attenuator, allowing connection to 2-wire and 3-wire speaker systems. Both have a compact ABS resin enclosure and push-in terminal for easy installation. Key specifications include a frequency response of 120-15,000Hz, 91dB sensitivity, and multiple power taps for 100V and 70V speaker lines.
This document summarizes an LB1-UW06-Fx cabinet loudspeaker from Bosch. It is a 6W loudspeaker intended for indoor use. It has mounting brackets for wall or ceiling mounting. It is constructed of MDF and has a durable vinyl or cloth covering available in white or black. It provides good speech intelligibility and background music reproduction.
This document summarizes a 6W loudspeaker for indoor use. It has good speech intelligibility and background music reproduction. The loudspeaker has an MDF construction with mounting brackets for wall or ceiling installation. It complies with international safety regulations and certifications.
The LA1-UW36-x is a 36W column loudspeaker for indoor use where directivity is important. It has high sensitivity and provides good speech intelligibility and background music reproduction. It has a swivel wall mounting bracket and is available in black or white. It uses four dual cone drivers and a durable MDF enclosure for reliability under extreme conditions.
The LA1-UW24-x is a 24W column loudspeaker for indoor use where directivity is important. It has good speech intelligibility and background music reproduction. It comes with a swivel wall-mounting bracket and is available in black or white. It has four high-sensitivity drivers and can be powered at full, half, or quarter power via a terminal block on the rear.
This document provides specifications for a BGT 4139TS video camera model. It includes details on the camera's image sensor, resolution, lenses, operational features like auto day/night mode and infrared LEDs, environmental tolerances, electrical requirements, mechanics including dimensions and weight, and manufacturer. The camera has a 1/3" CCD sensor, 600TVL resolution, auto settings, infrared for night vision up to 20 meters, and an IP66-rated casing.
This document provides specifications for a BGT 5504A camera model, including details about its video capabilities, lens, operational features, environmental tolerances, electrical requirements, and dimensions. It has a 1/4" CCD image sensor, 420TVL resolution, auto day/night mode, 15m infrared range, and measures 92mm diameter by 80mm, weighing 190g.
This data sheet provides specifications for the BGT 5140A video camera, including its CCD image sensor, PAL/NTSC compatibility, effective pixel count, 420TVL horizontal resolution, low light performance down to 0.5 lux, auto day/night functionality, 3.6mm fixed focal length lens, operating temperature range of -10°C to 50°C, power requirements of 12V 150mA with a 12V 1A adapter, and compact dimensions of 60x90x190g.
This data sheet provides specifications for a BGT 9120TS security camera model. It lists technical details such as the CCD image sensor and effective pixel resolution, as well as operational features including auto day/night mode, backlight compensation, and automatic gain control. Environmental specifications note an operating temperature range of -10°C to 50°C and IP66 protection rating. The camera is powered by a 12V 370mA power supply and has dimensions of 266x97x63mm.
This data sheet provides specifications for a BGT 9119AS video camera model. It has a 1/3 inch Sony CCD image sensor that can capture video in PAL or NTSC formats with effective pixel counts of 752x582 or 768x494 respectively. The camera has a 3.6/6mm fixed lens, auto day/night functionality, and can function in temperatures from -10 to 50 degrees Celsius. It is powered by a 12V 1A adapter and has IP67 protection against dust and water.
This document provides specifications for the BGT 720TOS security camera model, including details about its video capabilities, lens, operational features, environmental tolerances, electrical requirements, and dimensions. Key specs include a 1/3" Sony CCD image sensor, 600TVL horizontal resolution, auto day/night functionality, auto electronic shutter speed range of 1/50-1/100,000 sec for PAL and 1/60-1/100,000 sec for NTSC, operating temperature range of -10°C to +50°C, input voltage of DC12V/150mA, and compact dimensions of 102*55*40mm.
This document provides specifications for the BGT 5221AS video camera model. It includes details about the camera's image sensor, resolution, lenses, video output, day/night functionality, electrical requirements, and dimensions. Key features noted are a 1/3" Sony CCD image sensor, 480TVL horizontal resolution, auto day/night mode, infrared LEDs for night vision up to 10 meters, and DC12V 400mA power input. The camera measures 90*108*108mm and weighs 300g.
1. Networked Access Solutions
EdgeReader ERP40 ™
IP Intelligence at the Door with Integrated multiCLASS™ Reader for
Host Systems • 82125B
Complete - IP access solution that combines complete
controller functions and host interface with
an multiCLASS™ RP40 Reader
Real Cost Savings - Network access is CAT-5 for
communications and Power over Ethernet (PoE).
Eliminates the need for separate power supplies
or central controllers
Established Open Architecture - Built on the HID
OPIN® platform and managed from a host application.
Ideally suited for today’s IT-centric security environment
ACCESS Intelligence @ the Door
The HID EdgeReader™ IP Access Solution puts control and host interface at the door -- right inside
the HID contactless smart card reader. The HID EdgeReader ERP40 is a unique multiCLASS™
reader with an IP-enabled intelligent access control processor and host interface solution in a single
unit. With the same footprint as traditional reader solutions, the EdgeReader ERP40 provides a
complete and full-featured access control hardware/software infrastructure and contactless smart
card read/write capability at “the edge” of the network for OEM software host systems. A perfect
solution for new building installations, the EdgeReader ERP40 requires less wiring, and controls
every control function at the door.
The cost-effective EdgeReader ERP40 is ideally suited for today’s IT-centric security environment,
addressing the requirements for an IP-based solution incorporating PoE capability that takes
advantage of existing CAT-5 cable infrastructure.
EdgeReader ERP40 is a unique multiCLASS reader with an IP-enabled intelligent access control
processor and host interface solution in a single unit. With the same footprint as traditional reader
solutions, the EdgeReader ERP40 provides a complete and full-featured access control hardware/
software infrastructure and contactless smart card read/write capability at “the edge” of the
network for OEM software host systems. A perfect solution for new building installations, the
EdgeReader ERP40 requires less wiring,
Provides multi-technology card processing. Reads HID Prox, iCLASS®, DESFire® • ISO 15693 CSN
(MyD, I Code, Tag It), ISO14443A CSN (MIFARE®), FeliCa™ CSN, Simple migration from HID
Proximity to iCLASS.
Features
Stores up to 44,000 cards or credentials directly from the host
255 configurable priorities for supervised inputs/alarms
Incorporates the HID OPIN® Technology TCP/IP API with an available Windows DLL tool
Built-in 802.3af Power over Ethernet (PoE), with 600mA available for external field devices
Accepts local connection option via laptop for diagnostics and configuration
Connects to host on the IP network
Controls and powers all access devices at the door
Buffers up to 5,000 transactions if communication is disrupted with host and uploads when
network communications is restored
Controls and reports any passback (hard/soft/med)
RS-232 serial port for optional back-up via modem
UL294 Listed - Edge Reader 82125B is listed for use in UL installations where exposure is
controlled to only authorized persons.