FaçadeGIS as tool for performance driven facade design Luca Papaiz (glassAdvisor), Stefano Avesani (Eurac Research)

•

2 likes•252 views

The document summarizes results from the FACEcamp seminar on May 20, 2019 in Bolzano, Italy. It discusses FacadeGIS, a tool developed through the FACEcamp program that uses 10 years of hourly weather data covering Europe to simulate boundary conditions for facade design. FacadeGIS can determine the hottest and coldest glazing temperatures over 10 years, allowing analysis of climatic loads, thermal comfort, and temperature peaks for laminated glass and sealant feasibility. An upcoming feature will add thermal stress analysis and condensation risk evaluation. The presentation concludes by thanking attendees and providing contact information for the presenters from glassAdvisor GmbH and EURAC Research.

Technology

FACEcamp Results Seminar
FACADEgis a tool for performance
driven façade Design
Luca Papaiz – Stefano Avesani
glassAdvisor GmbH – EURAC Research
www.interreg.net
Bolzano, 20 May 2019
FACEcamp is funded by European Regional Development Fund and Interreg V-A Italy-Austria 2014-2020.

Results Seminar 20 May 2019, Bolzano
Luca Papaiz

Results Seminar 20 May 2019, Bolzano
glassAdvisor GmbH
Horazstrasse 19
Bozen - Italia
www.glassadvisor.com
Tel: +39 339 77 30103 Fax: +39 0471 287115
E-Mail: info@glassadvisor.com
gA-Report
No.: gA-6099-2017
gA version: 1.0
Date: 10-1-2018
Username: glassAdvisor
Team
Glassadvisor GmbH Srl
Horazstraße 19,
Via Orazio 19
39100 Bozen, Bolzano (BZ)
Italia
info@glassadvisor.com
www.glassadvisor.com
P.I. 02903760219
The version 1.0 of glassAdvisor
has been verified by Stazione
Sperimentale del Vetro and is
compliant to EN673, EN410 and
its Annex B.
These values are theoretical and
have informational purposes. The
manufacturers of materials used in
the simulation and glassAdvisor Srl
can not be held responsible for any
differences between the data hereby
presented and those observed in
reality. The spectra of the simulated
materials are subject to tolerances in
accordance to the relevant product
standards and are subject to change
without previous notice. Accessing
the soft-copy version of this report
may cause a recalculation of the
results according to updated
algorithm and/or database, the values
may differ from the hardcopy. The
possibility to simulate this product
configuration does not guarantee the
availability of the same in the market.
The values are referred to the center
of the glass, do not consider the
effects of the edge and are executed
according to one or more of the
following norms and relevant
attachments EN673, EN410,
EN13363-2 and ISO15099. The
values for noise reduction are stated
by the user and not calculated by the
software.
Project: FACEcamp Mockup - Option
B
Location: Brixen
To: FACEcamp group
Energy values EN13363-2
Ug Thermal Transmittance 0.6 W/m²K
g Solar Factor (SHGC) 34%
atot Total Absorption 43%
Light Values
Tv Light Transmission 58%
Rv External Light Reflection 21%
Rv' Internal Light Reflection 20%
Technical Data
 Thickness 125.5mm
 Weight [ kg/m2 ] 98.8Kg/m²
90°
Configuration (External -> Internal)
6mm | AGC Planibel Clearvision
0.76mm | gA PVB
6mm | AGC Planibel Clearvision
50mm | Air 100%
10mm | AGC Planibel Clearlite
#4 | AGC Stopray Vision-72
18mm | Air 100%
6mm | AGC Planibel Clearvision
18mm | Air 100%
#7 | AGC iplus Top 1.1
5mm | AGC Planibel Clearlite
0.76mm | gA PVB
5mm | AGC Planibel Clearlite
The extensive version of
this gA-Report, with
more than 20 figures
illustrated, may be
analyzed through tablet
or smartphone using
this QR code, or through
a desktop computer
clicking on the link below.
http://app.glassadvisor.com/configurator/5a5650ed2665f2536385d447/

Results Seminar 20 May 2019, Bolzano
EN410 Standard
Certified Simulation
Thermal
Simulation
Single Output
(g, Ug, Tv, Rv)
Infinite
Boundary
Conditions
=
Infinite Outputs
(Ug, °C, g)
Glass Configuration

Results Seminar 20 May 2019, Bolzano
What is a critical boundary condition to be used
during design?

Results Seminar 20 May 2019, Bolzano
Which is the glass
temperature peak
for a façade facing
94° East in Berlin?
FacadeGIS is an output from
FACEcamp which creates
boundary conditions based on
historical weather data:
• 10 year data
• Hour by hour
• Covering Europe up to
North-Africa and Jordan
FACADEGIS

The engine simulates 87 thousand hours
(10 years)
And finds the worst combination of
radiation and temperature

Current Features
• Hottest glazing temperatures
• Coldest glazing temperatures
Useful for:
• Climatic load static analysis
• Thermal Comfort
• Temperature peak for laminated and sealing
feasibility analysis
Results Seminar 20 May 2019, Bolzano

Coming Soon:
• Thermal Stress Analysis
• Condensation Risk
Results Seminar 20 May 2019, Bolzano

Thank you for your attention!
www.interreg.net
Luca Papaiz / Stefano Avesani
glassAdvisor GmbH / EURAC Research
info@glassadvisor.com / stefano.avesani@eurac.edu
FACEcamp is funded by European Regional Development Fund and Interreg V-A Italy-Austria 2014-2020.

This document summarizes the results of the FACEcamp training program on façade architecture, construction, and engineering. The program took place from April to December 2018, involved 16 trainees from 7 countries who worked on 16 potential research and development projects. A results seminar was held on May 20, 2019 in Bolzano, Italy to present the projects, evaluate the program, and discuss next steps. Feedback indicated the program was very successful overall, with new knowledge gained and expectations met. The standard FACE training format will continue with another summer school in 2019 and a fourth iteration in 2020.

in-situ g-value for monitoring of existing building facades Daniel Plorer (Un...

IDM Südtirol - Alto Adige

This document summarizes results from the FACEcamp project measuring the solar heat gain coefficient (g-value) of building facades in situ. Round robin tests found good agreement between measured g-values from an in-situ measurement device and calorimetric chamber measurements. Measurements of a sun shading system showed increasing g-values with higher angles of solar incidence, as expected. Comparisons with simulations from the WINDOW program also showed good agreement. The in-situ measurement device allows evaluating facade performance under real-world conditions.

Automotive polyamide circularity? Yes it’s feasible!

OlgaRodrguezLargo

EU H2020 HIT2GAP - SmarTABCD’15 Workshop - VERYSchool Navigator

Arantico Ltd

Presentation given on the EU VERYSchool project at the SmarTABCD’15, Workshop on Smart Technologies and Applications on Buildings, Cities and Districts. The workshop was organized in parallel to the 1th International Conference on Artificial Intelligence Applications and Innovations (AIAI 15) organized in Bayonne from the 14th to the 17th of September, and focused on results generated by recent European initiatives for the development of innovative smart technologies for buildings and districts efficiency. Building energy consumption is strongly dependent on the functionality of the building, the occupancy behavior, the outdoor environment, the structure and building materials, and the operation management. Nowadays and to optimize energy consumption, buildings are using automation systems with equipment, metering systems, smart devices and IoT (Internet of Things) applications to optimize their usage. Today’s automation systems produce tremendous amounts of data. This data can be very hard to organize and use across different applications because it is stored in many different formats; has inconsistent naming conventions and very limited data descriptors. In essence it lacks information to describe the meaning of the data. And without meaning a time–consuming manual effort is required before value creation can begin.

ESTIEM Lean Six Sigma Green Belt Project at Continental - Scrap Reduction

ESTIEM

The project was conducted during an internship by a student who had attended ESTIEM Lean Six Sigma Green Belt Course. Analytics presented in the case is directional to original. The case is used when students are selected for Lean Six Sigma Green Belt Intership at Continental. In the selection process candidates need to suggest a better way to use data and analytics. More information about about the course and opportunities can be found here: https://www.estiem.org/default.aspx?PageId=3824

Oil sensors for wind turbines

Edgar Martinez De Aguas

Atten2 develops oil sensors for condition monitoring in wind turbines. The presentation discusses Atten2's optical sensor technology which can detect various types of fluid degradation and machine wear. This allows early failure detection and root cause analysis. Atten2's sensors integrate with control and monitoring systems and provide remote monitoring services. Case studies show how Atten2's sensors identified issues during repair to avoid future failures. The technology aims to reduce operational risk and costs through optimized maintenance planning.

Oil Sensors for Wind Turbines

Edgar Martinez De Aguas

Our solutions allow to reach a new dimension in the prediction of machine failures, using state-of-the-art optical technology. Measuring the quality and condition of lubricants, we have established a new insight in the machines condition based monitoring. Implementing Advanced algorithms we transform digital data into accurate and effective information to assess the operational risk in critical machines, adding value to our customers business.

The JEC Europe 2013 composite show, held in Paris on 11th 14th March, 2013, covered the sectors major topics: mass production, thermoplastics, smart composites with embedded sensors, new applications, the environment, and recycling. Clearly, the trend in the composite world is on large production, and most notably thermoplastics. The idea is to find more and more applications for cheaper thermoplastics, that can be handled efficiently through RTM processes. Indeed, it is estimated that the composites market will grow at an average annual global rate of 6%, to reach a value of about 90 billion and a volume of 10 million metric tons by 2015 (compared to 80 billion and 9.2 million MT in 2012). However, there are still outstanding innovations for thermosetting materials, which are mostly based on faster curing ways...

FACEcamp CoCe: Vision, Mission & Sustainability plan Carlo Battisti (IDM Sout...

IDM Südtirol - Alto Adige

Low supply voltage test to screen resistive bridges in OTPs with dppm data

Pete Sarson, PH.D

A method for screening resistive bridges that are the side effect of an incomplete burning cycle of a Gate Oxide architecture One Time Programmable memory will be developed. This paper will show a correlation of One Time Programmable fuse failures that occur at low temperature to very low supply voltage test at room temperature. Multiple wafermaps will be presented showing the effects of the low temperature and the effect of screening at very low voltage on both good material and material exhibiting a step field issue causing memory failures. This will then be further developed to demonstrate how the neighbor dice that would need manual inking are caught with the very low voltage test.

BAGGI Company Profile

gujastrada

B.A.G.G.I. srl is an Italian company founded in 1947 that provides process instrumentation and analysis equipment. It has over 70 years of experience working with customers in industries like oil and gas, chemical, and manufacturing. The company offers modular measurement and analysis solutions using its BAGGI and SENSEVOLUTION product lines. It prides itself on providing reliable, customized solutions and worldwide support for customers.

AGC Group Introduction

Jingjing Yap

The document provides an overview of AGC Group, a Japanese manufacturer of glass, chemicals, and other materials. It summarizes the company's fiscal year 2018 results, listing total net sales of 1,522.9 billion yen and operating profit of 120.6 billion yen. It also outlines the company's business segments and their sales figures. AGC Group's long-term strategy through 2025 aims to establish stable earnings sources in core businesses while expanding into strategic growth areas like mobility, electronics, and life sciences.

Rethinking the Postal Assets: Trends in the postal market

Oliver Kempkens

PostExpo: Integrating the Analogue and Digital World: Customer-oriented Innov...

Francotyp-Postalia GmbH

CWIN17 Toulouse / Enhance the efficiency of your field operations with augmen...

Capgemini

A genuine Augmented Reality solution to provide support for a variety of remote tasks such as: • Connect onsite technicians in real-time with experts/assessors for remote assistance (includes sound, video, graphics 3D data, hardware components, etc.) • Improve video streaming to observe what the technician is seeing, make suggestions, share technical documents and annotate the information in real-time • Visualize georeferenced virtual screen with 3D drawings that could be incorporated in the video stream using Augmented Reality features for enhanced understanding

GESCO SE Annual General Meeting 2024, 29.05.2024

GESCO SE

IRJET- Metal Crack Detection using Image Processing

IRJET Journal

This document presents a system for detecting cracks and holes in metal pieces using image processing. The system uses a Raspberry Pi along with sensors like infrared and proximity sensors. Images of metal pieces on a production line are analyzed using computer vision algorithms like Canny edge detection to identify cracks. Detected cracks are used to separate defective from non-defective metal pieces. Data on quality inspection is sent from the Raspberry Pi to the cloud for remote access. The system aims to automate quality inspection to reduce manual labor needs and increase production efficiency compared to human-based inspection.

Apple iPhone X – Infrared Dot Projector 2017 teardown reverse costing report ...

system_plus

The world’s most advanced dot projector for 3D sensing with four innovative parts: Its package; a dedicated VCSEL; a folded optic; and the active DOE. Apple has made a great technology choice with its 3D facial identification for the iPhone X. The new technology is presented as being 20 times more accurate than the older fingerprint approach with a one-in-a million probability of a random person unlocking your iPhone.

AGC F_bonnefoy

Frederic Bonnefoy

AGC Glass Europe is a leading flat glass producer with 50,000 employees and 200 companies in over 30 countries. It has three main business segments: glass, electronics, and chemicals. AGC provides glass products for building integrated photovoltaics (BIPV) applications to produce energy and fit into buildings. Its BIPV product range includes extraclear glass and thin-film silicon coatings, and it works to ensure its products meet safety, insulation, and durability standards.

Expanding service offering through a collaborative approach: the CAREL case

CAREL Industries S.p.A

BCI Equinox 2022 - CLB Kien Truc Xanh - Mr Lim Yew Meng - EN

ARDOR

Mr LIM Yew Meng is the Executive Director in AGC Asia Pacific Pte Ltd, which operates as the regional headquarters of AGC Inc in the Asia-Pacific region. Prior to his current appointment, Yew Meng held the position of General Manager of the AGC Solar Business Unit in China that oversees AGC various solar businesses and products development. Upon his return to Singapore in 2013, Yew Meng has worked predominantly with Green Building councils in the Asia-Pacific region. These activities include contributing at the Annual Green Building Congress, assisting with green building products certification, green school initiatives including student design/Green Mark competition and the formulation of Embodied Carbon Primer, Net Zero Readiness Framework under World GBC Advancing Net Zero project. --- Về BCI: Tập đoàn Truyền thông Xây dựng BCI hoạt động báo cáo các dự án xây dựng tương lai trong khu vực châu Á Thái Bình Dương. BCI là cầu nối thông tin giữa các chuyên gia tư vấn thiết kế đang tìm kiếm sản phẩm để chỉ định cho các dự án và các nhà cung cấp đang tìm cách thông báo cho các nhà thiết kế về những sản phẩm và công nghệ xây dựng mới. Để làm điều đó, BCI tiến hành hơn 250.000 buổi gặp mặt và điện thoại phỏng vấn với kiến trúc sư, chủ đầu tư, kỹ sư và nhà thầu mỗi năm, báo cáo các dự án với tổng giá trị khoảng 400 tỷ đô la Mỹ. Bên cạnh việc đề cao sự minh bạch và hiệu quả thông qua dịch vụ nghiên cứu, BCI cũng xuất bản tập san FuturArc, Construction+ và các tạp chí kiến trúc khác. --- Về Câu lạc bộ Kiến trúc Xanh TP.HCM (CLB KTX TP.HCM): Câu lạc bộ Kiến trúc Xanh TP.HCM được thành lập vào tháng 09/2011 là nơi tập hợp các thành viên từ nhiều lĩnh vực, có cùng quan tâm và nhiệt huyết trong việc thúc đẩy sự phát triển các Công trình Xanh tại Việt Nam. Trải qua gần 11 năm hoạt động, cùng sự hỗ trợ của Trung tâm Tiết kiệm Năng lượng TP.HCM và Hội Kiến trúc sư TP.HCM trong thời gian đầu, CLB KTX TP.HCM ngày càng phát triển với số lượng thành viên chính thức hơn 500 người, tổ chức được nhiều Hội thảo chuyên ngành lớn về kiến trúc, quy hoạch, cảnh quan, nhà ở, vật liệu, trang thiết bị, công nghệ và năng lượng xanh, v.v. Các hội thảo được CLB tổ chức theo hướng trao đổi kiến thức, chia sẻ giải pháp và ứng dụng thực tiễn, với sự tham gia của các đơn vị đồng hành và đặc biệt là của các chuyên gia cùng lĩnh vực ở cả trong và ngoài nước. --- - News: https://www.futurarc.com/new/bci-equinox-ho-chi-minh-city-focuses-on-net-zero-carbon-and-wellness/ - News: https://www.constructionplusasia.com/vi/bci-equinox-2022-chu-de-net-zero-carbon-wellness/

15.30 dhr Nollau

Themadagen

The document describes the Production4μ project which aims to develop ultra precision production technologies for optics manufacturing. It has a total budget of 15.43 million euros and involves multiple partners across the optics production process chain, from design to assembly. Key aspects covered include the precision glass moulding technology, the full process chain from tool making to glass preform production, and the development of new ultra low transition temperature glass materials suitable for the moulding process.

15.30 dhr nollau

Themadagen

BIM in France and in Europe - Cristophe Castaing at OICE International Forum ...

Giacomo Bergonzoni

Goodix’s Ultra-Thin Optical In-Display Fingerprint

system_plus

Driving innovation through simulation ANSYS

Olivia Margot Giussani

This document discusses ANSYS and its product offerings for simulation. It summarizes that ANSYS is the largest independent simulation software company, with over 45,000 customers worldwide. It also introduces its Discovery product family, which aims to make simulation easier to use and more accessible earlier in the design process. This includes Discovery Live for rapid design exploration through instantaneous real-time simulation, and Discovery AIM for detailed analysis. The goal is to enable "pervasive simulation" across the entire design lifecycle.

Equity Forum Spring Conference 2023

GESCO SE

This document provides information about GESCO's spring conference to be held in Frankfurt from May 15-17, 2023. It discusses GESCO's business model of acquiring technology-driven SMEs, its strategy to grow sales to €1 billion at a 10% EBIT margin, and highlights from 2022 including successes in various subsidiaries. The fiscal year 2022 was the most successful to date, with record sales of €582.3 million and net profit of €33.8 million. An outlook for 2023 forecasts sales of €600-620 million and group earnings after minority interests of €32-34 million.

Façade innovation management Ingrid Demanega (Frener & Reifer)

IDM Südtirol - Alto Adige

Sabine Hoffmann, Technische Universität Kaiserslautern (DE) “How facades impa...

IDM Südtirol - Alto Adige

The document discusses a new methodology for assessing how facades impact thermal comfort using detailed dynamic simulations. It involves: 1) Calculating solar radiation on body parts using Radiance raytracing and accounting for complex fenestration systems. 2) Using the Physiology model (PhySCo) to calculate the body's thermo-physiological response and transient thermal sensation/comfort. 3) Example calculations are shown for different shading systems in Bolzano, Italy, looking at solar load, sensation, and comfort over time and annually.

Similar to FaçadeGIS as tool for performance driven facade design Luca Papaiz (glassAdvisor), Stefano Avesani (Eurac Research)

JEC Europe 2013 Competitive Intelligence Report

Viedoc

FACEcamp CoCe: Vision, Mission & Sustainability plan Carlo Battisti (IDM Sout...

IDM Südtirol - Alto Adige

Low supply voltage test to screen resistive bridges in OTPs with dppm data

Pete Sarson, PH.D

BAGGI Company Profile

gujastrada

AGC Group Introduction

Jingjing Yap

Rethinking the Postal Assets: Trends in the postal market

Oliver Kempkens

PostExpo: Integrating the Analogue and Digital World: Customer-oriented Innov...

Francotyp-Postalia GmbH

CWIN17 Toulouse / Enhance the efficiency of your field operations with augmen...

Capgemini

GESCO SE Annual General Meeting 2024, 29.05.2024

GESCO SE

IRJET- Metal Crack Detection using Image Processing

IRJET Journal

Apple iPhone X – Infrared Dot Projector 2017 teardown reverse costing report ...

system_plus

AGC F_bonnefoy

Frederic Bonnefoy

Expanding service offering through a collaborative approach: the CAREL case

CAREL Industries S.p.A

BCI Equinox 2022 - CLB Kien Truc Xanh - Mr Lim Yew Meng - EN

ARDOR

15.30 dhr Nollau

Themadagen

15.30 dhr nollau

Themadagen

BIM in France and in Europe - Cristophe Castaing at OICE International Forum ...

Giacomo Bergonzoni

Goodix’s Ultra-Thin Optical In-Display Fingerprint

system_plus

Driving innovation through simulation ANSYS

Olivia Margot Giussani

Equity Forum Spring Conference 2023

GESCO SE

Similar to FaçadeGIS as tool for performance driven facade design Luca Papaiz (glassAdvisor), Stefano Avesani (Eurac Research) (20)

JEC Europe 2013 Competitive Intelligence Report

FACEcamp CoCe: Vision, Mission & Sustainability plan Carlo Battisti (IDM Sout...

Low supply voltage test to screen resistive bridges in OTPs with dppm data

BAGGI Company Profile

AGC Group Introduction

Rethinking the Postal Assets: Trends in the postal market

PostExpo: Integrating the Analogue and Digital World: Customer-oriented Innov...

CWIN17 Toulouse / Enhance the efficiency of your field operations with augmen...

GESCO SE Annual General Meeting 2024, 29.05.2024

IRJET- Metal Crack Detection using Image Processing

Apple iPhone X – Infrared Dot Projector 2017 teardown reverse costing report ...

AGC F_bonnefoy

Expanding service offering through a collaborative approach: the CAREL case

BCI Equinox 2022 - CLB Kien Truc Xanh - Mr Lim Yew Meng - EN

15.30 dhr Nollau

15.30 dhr nollau

BIM in France and in Europe - Cristophe Castaing at OICE International Forum ...

Goodix’s Ultra-Thin Optical In-Display Fingerprint

Driving innovation through simulation ANSYS

Equity Forum Spring Conference 2023

More from IDM Südtirol - Alto Adige

Façade innovation management Ingrid Demanega (Frener & Reifer)

IDM Südtirol - Alto Adige

Sabine Hoffmann, Technische Universität Kaiserslautern (DE) “How facades impa...

IDM Südtirol - Alto Adige

Michael Reifer, Frener & Reifer, Brixen (IT) “Development and implementation ...

IDM Südtirol - Alto Adige

Chiara Pozzuoli, RWDI, London (UK) “The Art of Shaping the Building Envelope ...

IDM Südtirol - Alto Adige

Chiara Pozzuoli presented on shaping buildings to optimize their performance in wind conditions. Wind tunnel testing and computational fluid dynamics (CFD) can be used to evaluate wind loads on structures and identify responses to different shapes, orientations, and surrounding conditions. Optimization of the shape through tapering, setbacks, and other strategies can significantly reduce peak wind loads and moments on the structure. Non-wind issues like glare, thermal performance, falling snow, icing, and rainwater runoff must also be considered in the design of the building envelope.

Facade Fire Safety Engineering Stefano Prosseda (IDM South Tyrol)

IDM Südtirol - Alto Adige

Approaches and technologies for daylight Non-visual comfort in indoor space W...

IDM Südtirol - Alto Adige

A new modelling approach for Complex Fenestration system via CFD and Radiance...

IDM Südtirol - Alto Adige

Modelling tool chain for advanced façade performance assessment Daniel Plorer...

IDM Südtirol - Alto Adige

Stefano Avesani, Eurac Research, Institute for Renewable Energy - FACEcamp ov...

IDM Südtirol - Alto Adige

The Future Envelope 12. It’s all about performances.

IDM Südtirol - Alto Adige

Darren Woolf, Hoare Lea, London (UK) “How flow can you go?”

IDM Südtirol - Alto Adige

Harald Spitaler, Stahlbau Pichler, Bolzano (IT) “The design assist approach f...

IDM Südtirol - Alto Adige

Paolo Rosato, University of Trieste (IT) “Managing economic analysis of build...

IDM Südtirol - Alto Adige

Wilfried Pohl, Bartenbach GmbH, Aldrans (AT) “Visual comfort, well-being and ...

IDM Südtirol - Alto Adige

Roberto Lollini, Eurac Research, Institute for Renewable Energy

IDM Südtirol - Alto Adige

Christina Hopfe, Loughborough University (UK) “Addressing uncertainties in si...

IDM Südtirol - Alto Adige

Michael Grobbauer, Fachhochschule Salzburg (AT) “Hot building skins”

IDM Südtirol - Alto Adige

Jan Cremers, Hochschule für Technik Stuttgart (DE) “Designing Complex Membran...

IDM Südtirol - Alto Adige

Daniel Arztmann, Schüco International KG, Bielefeld (DE) “Facade Design Strat...

IDM Südtirol - Alto Adige

The document discusses strategies for improving urban and interior comfort through facade design. As the global population grows and urbanizes, living and working space for billions of additional people in cities will be needed by 2050. Facades must balance exterior demands like varying temperatures and interior needs including natural light, ventilation, and security. Both passive and active solutions are explored. Passive approaches include sound-absorbing facade units that can reduce noise levels. Active systems involve intelligent combinations of mechanics, electronics, and digital technologies, such as prototypes for acoustic windows with active noise control. The future of facades is framed as an important factor in sustainable, livable urban development.

Zona Comfort | Roberta Tomasi, Eurotherm SpA

IDM Südtirol - Alto Adige

More from IDM Südtirol - Alto Adige (20)