Electrolysis
•Download as PPT, PDF•
0 likes•450 views
Batteries use direct current for electrolysis, with an ammeter or bulb indicating current flow. The anode connects to the positive terminal and cathode to the negative, while a rheostat controls current through the electrolyte, with electrolysis decomposing the electrolyte through anions moving to the anode and cations to the cathode, converting electrical to chemical energy.
Report
Share
Report
Share
![Batteries: Direct current is used for electrolysis An ammeter or a bulb is used to indicate the flow of electric current Anode is the electrode connected to the positive terminal of the batteries Cathode is the electrode connected to the negative terminal of the batteries Rheostat is used to control of electric current that flows through the electrolyte ,[object Object],[object Object],[object Object]](https://image.slidesharecdn.com/electrolysis-101006060937-phpapp02/85/Electrolysis-1-320.jpg)
Recommended
Electricity
Electricity is the set of physical phenomena associated with the presence and motion of matter that has a property of electric charge. It is related to magnetism as part of electromagnetism. Electric charges consist of positive protons and negative electrons which produce a current when they flow in a circuit. Batteries provide energy to electrons in a circuit, pushing them from the negative terminal around the loop and back to the positive terminal. Current is measured in amperes or milliamperes using an ammeter, which must be connected in series in the circuit to measure the flow of electrons.
Bio Potential and Bio Electrodes
Bioelectrodes function as an interface between biological structures and electronic systems. They convert ionic potentials in the body to electronic potentials that can be measured. At rest, neurons maintain a potential of -70 mV due to ion concentration differences. An action potential occurs when the membrane reaches -55 mV, causing sodium and potassium ion channels to open and reverse the polarization. Action potentials propagate along axons to transmit signals. Synaptic transmission involves neurotransmitters being released at the synapse in response to an action potential. Bioelectrodes must have low impedance, be non-polarizing, and avoid motion artifacts when measuring biological signals like ECG, EEG, EMG.
Electricity
Electricity is a form of energy that is commonly used in everyday devices like heaters, phones, lamps, and fans. It is the flow of electrons through conductors like wires. An electrical circuit requires a power source, conductors to carry the current, and components that use the energy like light bulbs. Circuits can be connected in series or parallel. Voltage, current, and resistance follow Ohm's Law. Common circuit elements include batteries, wires, switches, and fuses. Electricity powers devices by producing effects like light, motion, and heat.
AVR_Course_Day1 basic electronics
This is a microcontroller course for atmega328 (the chip used in Arduino Uno) explained very simply .
Lecture23 ohmslaw
1. The document discusses electric current, batteries, resistance, and their relationships as defined by Ohm's Law and how power is calculated.
2. It explains that a battery produces electromotive force (emf) and maintains a voltage between its terminals, and that current is measured in Amperes.
3. Resistance depends on properties of the material like length, cross-sectional area, and resistivity, and that power is calculated based on voltage, current, and resistance as defined by Ohm's Law.
Bio electrode and its application in pharmacy
Bioelectrodes function as an interface between biological structures and electronic systems. They either sense or stimulate electrical activity in the biological structure. There are different types of bioelectrodes including surface electrodes, microelectrodes, and internal electrodes. Surface electrodes like metal plates are primarily used for ECG, EEG, and EMG applications and involve an electrolyte paste or jelly between the metal and skin. Bioelectrodes have various applications including cardiac monitoring, sleep encephalography, diagnostic muscle activity measurement, and more.
Care of your Computer Controlled Potentiostat
A potentiostat is an electronic instrument that measures and controls the voltage difference between a Working Electrode and a Reference Electrode. It measures the current flow between the Working and Counter Electrodes.
Electrical circuits
This document provides an overview of electrical circuits. It discusses how cells store and transfer chemical energy to electrical energy when connected in a circuit. Multiple cells together form a battery. Current is the flow of electrons through a circuit. Current flows from the negative terminal to the positive terminal of a cell. Simple circuits are demonstrated with a cell, lamp, and switch. Circuit diagrams use symbols to represent components. There are two types of circuits: series circuits where components are connected end to end, and parallel circuits where current has multiple paths through components connected side by side. Current is measured in amps with an ammeter and voltage is measured in volts with a voltmeter. Examples of circuits are shown and rules for calculating current and voltage in
Recommended
Electricity
Electricity is the set of physical phenomena associated with the presence and motion of matter that has a property of electric charge. It is related to magnetism as part of electromagnetism. Electric charges consist of positive protons and negative electrons which produce a current when they flow in a circuit. Batteries provide energy to electrons in a circuit, pushing them from the negative terminal around the loop and back to the positive terminal. Current is measured in amperes or milliamperes using an ammeter, which must be connected in series in the circuit to measure the flow of electrons.
Bio Potential and Bio Electrodes
Bioelectrodes function as an interface between biological structures and electronic systems. They convert ionic potentials in the body to electronic potentials that can be measured. At rest, neurons maintain a potential of -70 mV due to ion concentration differences. An action potential occurs when the membrane reaches -55 mV, causing sodium and potassium ion channels to open and reverse the polarization. Action potentials propagate along axons to transmit signals. Synaptic transmission involves neurotransmitters being released at the synapse in response to an action potential. Bioelectrodes must have low impedance, be non-polarizing, and avoid motion artifacts when measuring biological signals like ECG, EEG, EMG.
Electricity
Electricity is a form of energy that is commonly used in everyday devices like heaters, phones, lamps, and fans. It is the flow of electrons through conductors like wires. An electrical circuit requires a power source, conductors to carry the current, and components that use the energy like light bulbs. Circuits can be connected in series or parallel. Voltage, current, and resistance follow Ohm's Law. Common circuit elements include batteries, wires, switches, and fuses. Electricity powers devices by producing effects like light, motion, and heat.
AVR_Course_Day1 basic electronics
This is a microcontroller course for atmega328 (the chip used in Arduino Uno) explained very simply .
Lecture23 ohmslaw
1. The document discusses electric current, batteries, resistance, and their relationships as defined by Ohm's Law and how power is calculated.
2. It explains that a battery produces electromotive force (emf) and maintains a voltage between its terminals, and that current is measured in Amperes.
3. Resistance depends on properties of the material like length, cross-sectional area, and resistivity, and that power is calculated based on voltage, current, and resistance as defined by Ohm's Law.
Bio electrode and its application in pharmacy
Bioelectrodes function as an interface between biological structures and electronic systems. They either sense or stimulate electrical activity in the biological structure. There are different types of bioelectrodes including surface electrodes, microelectrodes, and internal electrodes. Surface electrodes like metal plates are primarily used for ECG, EEG, and EMG applications and involve an electrolyte paste or jelly between the metal and skin. Bioelectrodes have various applications including cardiac monitoring, sleep encephalography, diagnostic muscle activity measurement, and more.
Care of your Computer Controlled Potentiostat
A potentiostat is an electronic instrument that measures and controls the voltage difference between a Working Electrode and a Reference Electrode. It measures the current flow between the Working and Counter Electrodes.
Electrical circuits
This document provides an overview of electrical circuits. It discusses how cells store and transfer chemical energy to electrical energy when connected in a circuit. Multiple cells together form a battery. Current is the flow of electrons through a circuit. Current flows from the negative terminal to the positive terminal of a cell. Simple circuits are demonstrated with a cell, lamp, and switch. Circuit diagrams use symbols to represent components. There are two types of circuits: series circuits where components are connected end to end, and parallel circuits where current has multiple paths through components connected side by side. Current is measured in amps with an ammeter and voltage is measured in volts with a voltmeter. Examples of circuits are shown and rules for calculating current and voltage in
Electric circuit
An electric circuit is a closed loop made up of a generator, wires, and devices like light bulbs. Electricity can only flow through the circuit when the switch is closed, completing the loop and allowing the current to power the light bulb. Opening the switch breaks the circuit, stopping the electricity from flowing.
Electricity
Electricity involves the movement of electrons. It can be static electricity from electrons moving between objects, or current electricity from electrons flowing in a conductor. There are two types of electric charge - positive and negative - which attract and repel each other. Electricity flows through circuits that can be either closed, allowing current to flow, or open with a break preventing current. Circuits can be connected in series or parallel.
Care of Computer-Controlled Potentiostats
Recognize when something is wrong with your potentiostat. Looking for a new single channel or multichannel potentiostat? Gamry has a system for you. https://www.gamry.com
Electricity
The document discusses electricity and electrical circuits. It introduces Benjamin Franklin and Thomas Edison, who were important figures in understanding and advancing electricity. It defines electricity as the flow of electrons along a wire, which is called an electric current. The document also defines electrical circuits and their components, including cells/batteries, switches, lamps, and wires. It explains how circuits need to be complete for electricity to flow and power the lamp.
Basic electronics
This document provides an overview of basic electronic components, including resistors, capacitors, diodes, light emitting diodes (LEDs), transistors, inductors, and integrated circuits (ICs). It describes the function of each component, with resistors being used to reduce current flow, capacitors to store electrical energy, diodes to only conduct current in one direction, LEDs to emit light when current flows through, transistors to amplify or switch signals, inductors to store energy in a magnetic field, and ICs integrating many electronic circuits onto a single semiconductor chip.
Electric circuits 1
The document discusses electric circuits and their components. It explains that an electric circuit requires a power source, conducting materials like wires, components that use the electricity such as light bulbs, and switches. It also describes how to draw circuit diagrams using symbols and discusses key circuit concepts like current, voltage, resistance, and Ohm's law. Ohm's law defines the relationship between current, voltage, and resistance in a circuit. The document uses examples like dimmer switches and defibrillators to illustrate these circuit principles.
Electricity class with additional info
This document provides an overview of electricity and electric circuits. It defines key terms like current, voltage, resistance and discusses concepts such as series and parallel circuits. The three main points covered are:
1. It defines electricity as a form of energy involving the flow of electrons in a circuit. Current is defined as the flow of electric charge.
2. It explains how circuits work and the role of components like batteries, wires, switches and resistors. Resistance opposes the flow of current.
3. It introduces common circuit types like series and parallel and how resistance is calculated and changes between the two circuit arrangements. Measurement units like volts and ohms are also defined.
Electric circuits
The document discusses electrical circuits and their components. It explains that a cell stores chemical energy and converts it to electrical energy when connected in a circuit. Multiple cells together form a battery. Current is the flow of electrons through a complete circuit. Current flows from the negative terminal to the positive terminal of a cell. Simple circuits are demonstrated with a cell, lamp, and switch connected by wires to allow current to flow through when the switch is closed. Circuit diagrams use symbols to represent components like cells, switches, and lamps. There are two main types of circuits: series circuits have components connected end to end in one loop, while parallel circuits have branches with multiple paths. Current is measured in amps using an ammeter, and voltage is
Electricity In Our Lives (student preso)
The document summarizes how electricity reaches homes from power plants. It explains that power plants use fuels like nuclear, fossil fuels, geothermal or solar to produce heat energy which turns turbines to generate electricity. The electricity is then sent through high voltage switchyards where the voltage is increased for transmission over long distances through transmission lines. Distribution stations then step down the voltage for residential and commercial use. The electricity that enters homes is alternating current which is converted to direct current by transformers in electrical appliances for use.
12 electriciy
This document provides information about basic electric circuits, including:
1) Circuit symbols are used to simplify diagrams of electrical components like batteries, bulbs, switches, etc.
2) Materials are classified as conductors that allow electricity to flow or insulators that do not.
3) Electric current is actually a flow of electrons through a circuit from the negative terminal of a battery to the positive terminal.
Activecomp
This document provides an overview of electronic components, including both active and passive components. It discusses transistors as active components that can amplify or switch signals. Resistors, capacitors, and inductors are described as passive components. The document then focuses on diodes and transistors, explaining how diodes only allow current to flow in one direction when forward biased. It provides the symbols for NPN and PNP transistors and describes how transistors can be used for amplification and switching. LEDs are also summarized as diodes that light up when current passes through.
Practical Industrial Electronics for Engineers and Technicians
Industrial electronics has become an integral part of our businesses. A working knowledge of electronics has now become a prerequisite for efficiency in the work place.
This two-day workshop will 'demystify' the world of electronics to you and equip you to understand, identify and confidently troubleshoot electronic problems. You will gain the vital knowledge that you need to: multi-skill, reduce down-time, save your company money, and secure your value in the workplace. You will learn the latest trends and techniques in the fastmoving field of industrial electronics.
WHO SHOULD ATTEND?
All engineering, operations or management personnel who are directly or indirectly involved with electronics controls
Anyone whose work requires the use of electronic equipment
Maintenance technicians, electricians, foremen and engineers
Mechanical and chemical engineers, operators and personnel who need electronics knowledge
Those involved with the installing, programming, maintaining and purchasing of electronic control equipment
Those who want to improve their understanding and capabilities in electronic technology
Those who wish to be able to multi-skill into electronics maintenance technicians, electricians, foremen and engineers
MORE INFORMATION: http://www.idc-online.com/content/practical-industrial-electronics-engineers-and-technicians-11
Circuit (symbols,dimmer and brighter)
This document discusses the basics of electricity and electrical circuits. It explains that electricity is the flow of electric charges through a wire, just as water flows through a river. An electrical circuit needs three main components - a power source like a battery, a load such as a light bulb, and wires or other connectors to complete the circuit. It also discusses concepts like open versus closed circuits, and how changing components like batteries or bulbs affects brightness. Symbols are introduced for common circuit elements. Worksheets are included to have the reader draw sample circuits.
Electronics Presentation 06
This document provides an overview of the electronic system components of a robot and the wiring process. It includes:
1) The main electronic system components of a robot which include the computer, circuit breakers, power controllers like victors and spikes, batteries, main power switch, grounding stud, power distribution block, and sensors.
2) Descriptions of each component and their functions in the robot's power and control system.
3) Guidelines for the wiring process which involve attaching components, measuring and cutting wires, connecting with the proper connectors, organizing wires, and basic wiring rules around wire sizes, connections, and safety.
Electriccircuits 121130065743-phpapp02
The document discusses electrical circuits and their components. It can be summarized as follows:
1. Electrical circuits allow the transfer of chemical energy from cells or batteries into electrical energy to power components like lamps. A circuit provides a continuous path for electric current to flow through wires and components.
2. There are two main types of circuits - series circuits where the components are connected end to end in one loop, and parallel circuits where the current has multiple paths through components connected side by side.
3. Electric current is measured in amps using an ammeter connected in series in the circuit. Voltage, the "electrical push" provided by cells, is measured in volts using a voltmeter connected across circuit
Electriccircuits 121130065743-phpapp02
The document discusses electrical circuits and their components. It can be summarized as follows:
1. Electrical circuits allow the transfer of chemical energy from cells or batteries into electrical energy to power components like lamps. A circuit provides a continuous path for electric current to flow through wires and components.
2. There are two main types of circuits - series circuits where the components are connected end to end in one loop, and parallel circuits where the current has multiple paths through components connected side by side.
3. Electric current is measured in amps using an ammeter connected in series in the circuit. Voltage, the "electrical push" provided by cells, is measured in volts using a voltmeter connected across circuit
Electric current
An electric current is a flow of electric charge. In electric circuits this charge is often carried by moving electrons in a wire. It can also be carried by ions in an electrolyte, or by both ions and electrons such as in a plasma.
basic-electronics
This document provides an overview of basic electronics theory. It defines electronics as the branch of physics dealing with electrons and electronic devices. It describes the three states of matter and how atoms are made up of protons, neutrons, and electrons. Kirchhoff's laws are introduced regarding the behavior of electric charges. Conductors, insulators, voltage, current, and resistance are defined. The document also covers basic circuit diagrams, Ohm's law, capacitors, and different types of capacitors.
Basic electronics for technicians
This is a summary of basic electronics for technicians which will help to have a basic knowledge on electronics.
Electronics applications and components
Electronics is the branch of science dealing with the controlled movement of electrons. Electronics has applications in communication, entertainment, industry, medical science, and defense. There are two main types of electronic components - active components and passive components. Active components like transistors and logic gates can amplify or process electrical signals, while passive components like resistors, capacitors, and inductors cannot amplify or process signals. Transistors act as switches to regulate current or voltage, and logic gates are basic building blocks of digital circuits. Resistors limit electrical current, capacitors store energy electrostatically, and inductors store energy magnetically.
Porseshpasokh
به علت همین مشکلات، کلوین بعد از چند سال رویکرد تدریس خود را به صورتی بازتنظیم کرد که سؤالات بیشتری از یادگیرندگان بپرسد تا بهنوعی از آنها برای پاسخ دادن و مشارکت دعوت کند.
لینک دوره ها در سایت:
https://iksw.ir/course/
Ppf presentation on_fentons-final-to-trans-rev2.ppt
The document discusses the use of Fenton chemistry and RADOX-23 systems for odor control. It provides background on Fenton reagents and reactions, and details how Steen Research has successfully applied Fenton systems to reduce odors and pollutants from various industrial processes, including denim manufacturing, rendering, and poultry plants. The systems create hydroxyl radicals to destroy organic compounds, offering cost-effective odor control without generating toxic byproducts.
More Related Content
What's hot
Electric circuit
An electric circuit is a closed loop made up of a generator, wires, and devices like light bulbs. Electricity can only flow through the circuit when the switch is closed, completing the loop and allowing the current to power the light bulb. Opening the switch breaks the circuit, stopping the electricity from flowing.
Electricity
Electricity involves the movement of electrons. It can be static electricity from electrons moving between objects, or current electricity from electrons flowing in a conductor. There are two types of electric charge - positive and negative - which attract and repel each other. Electricity flows through circuits that can be either closed, allowing current to flow, or open with a break preventing current. Circuits can be connected in series or parallel.
Care of Computer-Controlled Potentiostats
Recognize when something is wrong with your potentiostat. Looking for a new single channel or multichannel potentiostat? Gamry has a system for you. https://www.gamry.com
Electricity
The document discusses electricity and electrical circuits. It introduces Benjamin Franklin and Thomas Edison, who were important figures in understanding and advancing electricity. It defines electricity as the flow of electrons along a wire, which is called an electric current. The document also defines electrical circuits and their components, including cells/batteries, switches, lamps, and wires. It explains how circuits need to be complete for electricity to flow and power the lamp.
Basic electronics
This document provides an overview of basic electronic components, including resistors, capacitors, diodes, light emitting diodes (LEDs), transistors, inductors, and integrated circuits (ICs). It describes the function of each component, with resistors being used to reduce current flow, capacitors to store electrical energy, diodes to only conduct current in one direction, LEDs to emit light when current flows through, transistors to amplify or switch signals, inductors to store energy in a magnetic field, and ICs integrating many electronic circuits onto a single semiconductor chip.
Electric circuits 1
The document discusses electric circuits and their components. It explains that an electric circuit requires a power source, conducting materials like wires, components that use the electricity such as light bulbs, and switches. It also describes how to draw circuit diagrams using symbols and discusses key circuit concepts like current, voltage, resistance, and Ohm's law. Ohm's law defines the relationship between current, voltage, and resistance in a circuit. The document uses examples like dimmer switches and defibrillators to illustrate these circuit principles.
Electricity class with additional info
This document provides an overview of electricity and electric circuits. It defines key terms like current, voltage, resistance and discusses concepts such as series and parallel circuits. The three main points covered are:
1. It defines electricity as a form of energy involving the flow of electrons in a circuit. Current is defined as the flow of electric charge.
2. It explains how circuits work and the role of components like batteries, wires, switches and resistors. Resistance opposes the flow of current.
3. It introduces common circuit types like series and parallel and how resistance is calculated and changes between the two circuit arrangements. Measurement units like volts and ohms are also defined.
Electric circuits
The document discusses electrical circuits and their components. It explains that a cell stores chemical energy and converts it to electrical energy when connected in a circuit. Multiple cells together form a battery. Current is the flow of electrons through a complete circuit. Current flows from the negative terminal to the positive terminal of a cell. Simple circuits are demonstrated with a cell, lamp, and switch connected by wires to allow current to flow through when the switch is closed. Circuit diagrams use symbols to represent components like cells, switches, and lamps. There are two main types of circuits: series circuits have components connected end to end in one loop, while parallel circuits have branches with multiple paths. Current is measured in amps using an ammeter, and voltage is
Electricity In Our Lives (student preso)
The document summarizes how electricity reaches homes from power plants. It explains that power plants use fuels like nuclear, fossil fuels, geothermal or solar to produce heat energy which turns turbines to generate electricity. The electricity is then sent through high voltage switchyards where the voltage is increased for transmission over long distances through transmission lines. Distribution stations then step down the voltage for residential and commercial use. The electricity that enters homes is alternating current which is converted to direct current by transformers in electrical appliances for use.
12 electriciy
This document provides information about basic electric circuits, including:
1) Circuit symbols are used to simplify diagrams of electrical components like batteries, bulbs, switches, etc.
2) Materials are classified as conductors that allow electricity to flow or insulators that do not.
3) Electric current is actually a flow of electrons through a circuit from the negative terminal of a battery to the positive terminal.
Activecomp
This document provides an overview of electronic components, including both active and passive components. It discusses transistors as active components that can amplify or switch signals. Resistors, capacitors, and inductors are described as passive components. The document then focuses on diodes and transistors, explaining how diodes only allow current to flow in one direction when forward biased. It provides the symbols for NPN and PNP transistors and describes how transistors can be used for amplification and switching. LEDs are also summarized as diodes that light up when current passes through.
Practical Industrial Electronics for Engineers and Technicians
Industrial electronics has become an integral part of our businesses. A working knowledge of electronics has now become a prerequisite for efficiency in the work place.
This two-day workshop will 'demystify' the world of electronics to you and equip you to understand, identify and confidently troubleshoot electronic problems. You will gain the vital knowledge that you need to: multi-skill, reduce down-time, save your company money, and secure your value in the workplace. You will learn the latest trends and techniques in the fastmoving field of industrial electronics.
WHO SHOULD ATTEND?
All engineering, operations or management personnel who are directly or indirectly involved with electronics controls
Anyone whose work requires the use of electronic equipment
Maintenance technicians, electricians, foremen and engineers
Mechanical and chemical engineers, operators and personnel who need electronics knowledge
Those involved with the installing, programming, maintaining and purchasing of electronic control equipment
Those who want to improve their understanding and capabilities in electronic technology
Those who wish to be able to multi-skill into electronics maintenance technicians, electricians, foremen and engineers
MORE INFORMATION: http://www.idc-online.com/content/practical-industrial-electronics-engineers-and-technicians-11
Circuit (symbols,dimmer and brighter)
This document discusses the basics of electricity and electrical circuits. It explains that electricity is the flow of electric charges through a wire, just as water flows through a river. An electrical circuit needs three main components - a power source like a battery, a load such as a light bulb, and wires or other connectors to complete the circuit. It also discusses concepts like open versus closed circuits, and how changing components like batteries or bulbs affects brightness. Symbols are introduced for common circuit elements. Worksheets are included to have the reader draw sample circuits.
Electronics Presentation 06
This document provides an overview of the electronic system components of a robot and the wiring process. It includes:
1) The main electronic system components of a robot which include the computer, circuit breakers, power controllers like victors and spikes, batteries, main power switch, grounding stud, power distribution block, and sensors.
2) Descriptions of each component and their functions in the robot's power and control system.
3) Guidelines for the wiring process which involve attaching components, measuring and cutting wires, connecting with the proper connectors, organizing wires, and basic wiring rules around wire sizes, connections, and safety.
Electriccircuits 121130065743-phpapp02
The document discusses electrical circuits and their components. It can be summarized as follows:
1. Electrical circuits allow the transfer of chemical energy from cells or batteries into electrical energy to power components like lamps. A circuit provides a continuous path for electric current to flow through wires and components.
2. There are two main types of circuits - series circuits where the components are connected end to end in one loop, and parallel circuits where the current has multiple paths through components connected side by side.
3. Electric current is measured in amps using an ammeter connected in series in the circuit. Voltage, the "electrical push" provided by cells, is measured in volts using a voltmeter connected across circuit
Electriccircuits 121130065743-phpapp02
The document discusses electrical circuits and their components. It can be summarized as follows:
1. Electrical circuits allow the transfer of chemical energy from cells or batteries into electrical energy to power components like lamps. A circuit provides a continuous path for electric current to flow through wires and components.
2. There are two main types of circuits - series circuits where the components are connected end to end in one loop, and parallel circuits where the current has multiple paths through components connected side by side.
3. Electric current is measured in amps using an ammeter connected in series in the circuit. Voltage, the "electrical push" provided by cells, is measured in volts using a voltmeter connected across circuit
Electric current
An electric current is a flow of electric charge. In electric circuits this charge is often carried by moving electrons in a wire. It can also be carried by ions in an electrolyte, or by both ions and electrons such as in a plasma.
basic-electronics
This document provides an overview of basic electronics theory. It defines electronics as the branch of physics dealing with electrons and electronic devices. It describes the three states of matter and how atoms are made up of protons, neutrons, and electrons. Kirchhoff's laws are introduced regarding the behavior of electric charges. Conductors, insulators, voltage, current, and resistance are defined. The document also covers basic circuit diagrams, Ohm's law, capacitors, and different types of capacitors.
Basic electronics for technicians
This is a summary of basic electronics for technicians which will help to have a basic knowledge on electronics.
Electronics applications and components
Electronics is the branch of science dealing with the controlled movement of electrons. Electronics has applications in communication, entertainment, industry, medical science, and defense. There are two main types of electronic components - active components and passive components. Active components like transistors and logic gates can amplify or process electrical signals, while passive components like resistors, capacitors, and inductors cannot amplify or process signals. Transistors act as switches to regulate current or voltage, and logic gates are basic building blocks of digital circuits. Resistors limit electrical current, capacitors store energy electrostatically, and inductors store energy magnetically.
What's hot (20)
Practical Industrial Electronics for Engineers and Technicians
Practical Industrial Electronics for Engineers and Technicians
Viewers also liked
Porseshpasokh
به علت همین مشکلات، کلوین بعد از چند سال رویکرد تدریس خود را به صورتی بازتنظیم کرد که سؤالات بیشتری از یادگیرندگان بپرسد تا بهنوعی از آنها برای پاسخ دادن و مشارکت دعوت کند.
لینک دوره ها در سایت:
https://iksw.ir/course/
Ppf presentation on_fentons-final-to-trans-rev2.ppt
The document discusses the use of Fenton chemistry and RADOX-23 systems for odor control. It provides background on Fenton reagents and reactions, and details how Steen Research has successfully applied Fenton systems to reduce odors and pollutants from various industrial processes, including denim manufacturing, rendering, and poultry plants. The systems create hydroxyl radicals to destroy organic compounds, offering cost-effective odor control without generating toxic byproducts.
The Collision Theory
The document discusses collision theory and factors that affect chemical reaction rates, stating that reaction rates increase with higher temperatures, larger surface areas, higher concentrations of reactants, and the presence of catalysts as these factors all lead to more frequent collisions between reactant molecules that have sufficient kinetic energy to reach the transition state.
Chemical Kinetics
This document summarizes key concepts in chemical kinetics including:
1) Kinetics is the study of reaction rates and how the molecular mechanism influences the rate. Factors like temperature, concentration, and catalysts affect the reaction rate.
2) The rate of a reaction is defined as the change in concentration of a reactant or product over time. Rate laws relate the reaction rate to concentrations of reactants.
3) Integrated rate laws allow calculation of reactant/product concentration as a function of time for different reaction orders (zero, first, second order). Graphical methods using these relations can determine the reaction order and rate constant.
Chemical kinetics
This document provides an overview of chemical kinetics and reaction rates. It defines chemical kinetics as the study of rates of chemical reactions, and explains that the rate of a reaction is defined as the change in concentration of a reactant or product over time. It then discusses reaction orders, rate laws, rate constants, and how temperature affects reaction rates. The document uses examples to show how to determine the order of reactions and calculate rate constants from experimental data. It also explains zero-order, first-order, and second-order reactions through graphs and equations. Overall, the document provides a comprehensive introduction to the key concepts and calculations involved in chemical kinetics.
Chapter 14 Lecture- Chemical Kinetics
The document discusses reaction rates and kinetics. It defines factors that affect reaction rates such as concentration of reactants, physical state, temperature, and catalysts. It also describes methods for determining reaction rates by measuring changes in concentration over time. Rate laws relate the rate of reaction to concentrations of reactants through rate constants and reaction orders. Integrated rate laws can be used to determine concentrations of reactants over time for reactions of different orders.
Chapter 20 Lecture- Electrochemistry
Let's balance this step-by-step using the half-reaction method:
Oxidation: Ag → Ag+
Reduction: 1/2O2 + H+ → H2O
Balanced half-reactions:
Ag → Ag+
1/2O2 + H+ → H2O
Overall balanced reaction:
1Ag + 1/2O2 + 1H+ → 1Ag+ + 1H2O
The correct coefficients are:
1, 1/2, 1, 1, 1
The answer is 1.
Electrochemistry
This document provides an overview of electrochemistry. It begins by defining electrochemistry as the study of chemical reactions at the interface of an electrode and electrolyte involving the interaction of electrical and chemical changes. The document then discusses the history and founders of electrochemistry, including Faraday's two laws of electrolysis. It explains key concepts such as oxidation-reduction reactions, balancing redox equations, and the Nernst equation. The document also covers applications including batteries, corrosion, electrolysis, and branches of electrochemistry like bioelectrochemistry and nanoelectrochemistry.
Cmc chapter 20
This document provides an overview of several sections on the topic of electrochemistry from a textbook or online course. It covers voltaic cells and how they generate electrical energy from redox reactions, different types of batteries like dry cells, lead-acid, and lithium batteries, fuel cells, corrosion and how to prevent it, and electrolysis and its applications in processes like metal smelting and electroplating. Diagrams and terminology related to these topics are also defined throughout the document sections.
Principles of corrosion
A presentation giving the basic principles of corrosion. Electrochemical nature of corrosion, anodic and cathodic reactions, electrode potentials, mixed potential theory and kinetics of corrosion, thermodynamics of corrosion and Pourbaix diagrams, and passivization behavior of metals are outlined.
Viewers also liked (10)
Ppf presentation on_fentons-final-to-trans-rev2.ppt
Ppf presentation on_fentons-final-to-trans-rev2.ppt
More from Faridah Hamat
Round robin english
This document contains information about chemistry concepts taught using the "Round Robin" method. It includes 8 sections called PINTAR that cover topics like solubility rules for salts, reactions to form salts, tests to identify cations, and the behavior of salts when heated. The purpose is for students to memorize the content through repeated oral recitation of the sections in a round-robin style until all students have memorized the full content.
Chapter 9 manufacture substances
This document discusses several important industrial products and manufactured substances. It provides details on the production and uses of sulphuric acid, ammonia, alloys, synthetic polymers, glass, ceramics, and composite materials. Sulphuric acid is manufactured through the contact process and is used to make fertilizers and batteries. Ammonia is produced via the Haber process and converted into fertilizers. Alloys are metal mixtures that are stronger than pure metals. Glass and ceramics are hard, brittle materials made from sand and clay, respectively. Composite materials combine substances like metals and polymers to produce materials with improved properties.
Chapter 4 perodic table
The document summarizes key aspects of the periodic table, including:
1) It describes the historical development of the periodic table by scientists like Lavoisier, Dobereiner, Newlands, Meyer, and Mendeleev.
2) It explains the modern arrangement of elements in the periodic table based on proton number and discusses the properties of elements in the same group and period.
3) It provides examples of properties and reactions of representative elements from groups 1, 17, 18 and period 3 of the periodic table. Transition elements and semimetals are also discussed.
Chapter 2 structure of atom
1. The document provides lesson notes on the structure of the atom, including the particulate nature of matter, states of matter, atomic structure, isotopes, and the electronic structure of atoms.
2. It explains key concepts such as the kinetic particle theory, processes of changing state, diffusion, the historical development of atomic models, subatomic particles, and electron configuration.
3. Examples are given to illustrate isotopes and the arrangement of electrons in shells, with the first shell holding up to 2 electrons and the second up to 8.
Electrolysis molten sodium chloride
The document summarizes the process of electrolysis for two types of electrolytes: molten sodium chloride and aqueous electrolytes. For molten sodium chloride, sodium and chloride ions move to the cathode and anode, respectively, where they are discharged. Sodium forms at the cathode while chlorine gas forms at the anode. For aqueous electrolytes like dilute sulfuric acid, hydrogen, sulfate, and hydroxide ions are present and migrate to the electrodes where hydrogen gas forms at the cathode and oxygen gas forms at the anode.
Type of electrodes
This document describes the electrolysis of a copper(II) sulfate solution using copper electrodes. During electrolysis, copper ions and hydrogen ions move to the cathode where copper ions are discharged to form a brown copper deposit, while hydroxide and sulfate ions move to the anode where the copper electrode dissolves to release copper ions and electrons. The process results in the cathode gaining mass and thickness while the anode loses mass and becomes thinner, but the concentration and blue color of the copper ions in the solution remains unchanged.
Concentration of ions in the solution
The document describes the electrolysis of a 1.0 mol/dm3 sodium chloride solution using carbon electrodes. During electrolysis, sodium and chloride ions move to the cathode and anode respectively. At the cathode, hydrogen ions are discharged to produce hydrogen gas while at the anode, chloride ions are discharged to produce chlorine gas. The solution becomes alkaline after electrolysis due to the presence of sodium hydroxide.
Electrolysis of molten compounds
Electrolysis is a process where an electrolyte is broken down into its constituent elements when electricity passes through. An electrolytic cell converts electrical energy to chemical energy using a battery, electrolyte, and two electrodes. During electrolysis, anions move toward the anode and cations move toward the cathode, where they are discharged by gaining or losing electrons.
Electrolyte
Electrolytes are substances that can conduct electricity when molten or dissolved in water, as they dissociate into ions that are free to move. Non-electrolytes do not contain ions and cannot conduct electricity either when molten or dissolved. While solid ionic compounds cannot conduct due to their tightly bound ions, they can conduct in molten or aqueous states as their ions gain freedom of movement.
Bengkel elektrolisis 2
The document provides information about electrolysis experiments using different electrolyte solutions and electrodes. In the first experiment, a sodium sulfate solution is electrolyzed using carbon electrodes. Ions move to the electrodes and gases are produced. Hydrogen gas is collected at one electrode. In the second experiment, dilute sodium chloride solution is electrolyzed and chlorine gas is collected at one electrode.
Acid And Base
An acid is a chemical substance that produces hydrogen ions (H+) in water, while a base reacts with an acid to produce salt and water. Strong acids fully ionize in water to produce a high concentration of H+ ions, while weak acids only partially ionize, producing a low H+ concentration. Strong bases fully ionize to produce a high concentration of hydroxide (OH-) ions, unlike weak bases. Acids have sour tastes, turn litmus paper red, and are electrolytes in water. They react with metals, bases, carbonates, and alkalis to produce salts, hydrogen gas, water, and carbon dioxide. Bases have bitter tastes, turn litmus paper blue, and are electrolytes
More from Faridah Hamat (11)
Recently uploaded
Wound healing PPT
This document provides an overview of wound healing, its functions, stages, mechanisms, factors affecting it, and complications.
A wound is a break in the integrity of the skin or tissues, which may be associated with disruption of the structure and function.
Healing is the body’s response to injury in an attempt to restore normal structure and functions.
Healing can occur in two ways: Regeneration and Repair
There are 4 phases of wound healing: hemostasis, inflammation, proliferation, and remodeling. This document also describes the mechanism of wound healing. Factors that affect healing include infection, uncontrolled diabetes, poor nutrition, age, anemia, the presence of foreign bodies, etc.
Complications of wound healing like infection, hyperpigmentation of scar, contractures, and keloid formation.
Beyond Degrees - Empowering the Workforce in the Context of Skills-First.pptx
Iván Bornacelly, Policy Analyst at the OECD Centre for Skills, OECD, presents at the webinar 'Tackling job market gaps with a skills-first approach' on 12 June 2024
Leveraging Generative AI to Drive Nonprofit Innovation
In this webinar, participants learned how to utilize Generative AI to streamline operations and elevate member engagement. Amazon Web Service experts provided a customer specific use cases and dived into low/no-code tools that are quick and easy to deploy through Amazon Web Service (AWS.)
South African Journal of Science: Writing with integrity workshop (2024)
South African Journal of Science: Writing with integrity workshop (2024)Academy of Science of South Africa
A workshop hosted by the South African Journal of Science aimed at postgraduate students and early career researchers with little or no experience in writing and publishing journal articles.Traditional Musical Instruments of Arunachal Pradesh and Uttar Pradesh - RAYH...
Traditional Musical Instruments of Arunachal Pradesh and Uttar Pradesh
Hindi varnamala | hindi alphabet PPT.pdf
हिंदी वर्णमाला पीपीटी, hindi alphabet PPT presentation, hindi varnamala PPT, Hindi Varnamala pdf, हिंदी स्वर, हिंदी व्यंजन, sikhiye hindi varnmala, dr. mulla adam ali, hindi language and literature, hindi alphabet with drawing, hindi alphabet pdf, hindi varnamala for childrens, hindi language, hindi varnamala practice for kids, https://www.drmullaadamali.com
How to Setup Warehouse & Location in Odoo 17 Inventory
In this slide, we'll explore how to set up warehouses and locations in Odoo 17 Inventory. This will help us manage our stock effectively, track inventory levels, and streamline warehouse operations.
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 9 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2024-2025 - ...
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 9 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2024-2025 - ...Nguyen Thanh Tu Collection
https://app.box.com/s/tacvl9ekroe9hqupdnjruiypvm9rdaneLAND USE LAND COVER AND NDVI OF MIRZAPUR DISTRICT, UP
This Dissertation explores the particular circumstances of Mirzapur, a region located in the
core of India. Mirzapur, with its varied terrains and abundant biodiversity, offers an optimal
environment for investigating the changes in vegetation cover dynamics. Our study utilizes
advanced technologies such as GIS (Geographic Information Systems) and Remote sensing to
analyze the transformations that have taken place over the course of a decade.
The complex relationship between human activities and the environment has been the focus
of extensive research and worry. As the global community grapples with swift urbanization,
population expansion, and economic progress, the effects on natural ecosystems are becoming
more evident. A crucial element of this impact is the alteration of vegetation cover, which plays a
significant role in maintaining the ecological equilibrium of our planet.Land serves as the foundation for all human activities and provides the necessary materials for
these activities. As the most crucial natural resource, its utilization by humans results in different
'Land uses,' which are determined by both human activities and the physical characteristics of the
land.
The utilization of land is impacted by human needs and environmental factors. In countries
like India, rapid population growth and the emphasis on extensive resource exploitation can lead
to significant land degradation, adversely affecting the region's land cover.
Therefore, human intervention has significantly influenced land use patterns over many
centuries, evolving its structure over time and space. In the present era, these changes have
accelerated due to factors such as agriculture and urbanization. Information regarding land use and
cover is essential for various planning and management tasks related to the Earth's surface,
providing crucial environmental data for scientific, resource management, policy purposes, and
diverse human activities.
Accurate understanding of land use and cover is imperative for the development planning
of any area. Consequently, a wide range of professionals, including earth system scientists, land
and water managers, and urban planners, are interested in obtaining data on land use and cover
changes, conversion trends, and other related patterns. The spatial dimensions of land use and
cover support policymakers and scientists in making well-informed decisions, as alterations in
these patterns indicate shifts in economic and social conditions. Monitoring such changes with the
help of Advanced technologies like Remote Sensing and Geographic Information Systems is
crucial for coordinated efforts across different administrative levels. Advanced technologies like
Remote Sensing and Geographic Information Systems
9
Changes in vegetation cover refer to variations in the distribution, composition, and overall
structure of plant communities across different temporal and spatial scales. These changes can
occur natural.
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...National Information Standards Organization (NISO)
This presentation was provided by Steph Pollock of The American Psychological Association’s Journals Program, and Damita Snow, of The American Society of Civil Engineers (ASCE), for the initial session of NISO's 2024 Training Series "DEIA in the Scholarly Landscape." Session One: 'Setting Expectations: a DEIA Primer,' was held June 6, 2024.Pengantar Penggunaan Flutter - Dart programming language1.pptx
Pengantar Penggunaan Flutter - Dart programming language1.pptx
Walmart Business+ and Spark Good for Nonprofits.pdf
"Learn about all the ways Walmart supports nonprofit organizations.
You will hear from Liz Willett, the Head of Nonprofits, and hear about what Walmart is doing to help nonprofits, including Walmart Business and Spark Good. Walmart Business+ is a new offer for nonprofits that offers discounts and also streamlines nonprofits order and expense tracking, saving time and money.
The webinar may also give some examples on how nonprofits can best leverage Walmart Business+.
The event will cover the following::
Walmart Business + (https://business.walmart.com/plus) is a new shopping experience for nonprofits, schools, and local business customers that connects an exclusive online shopping experience to stores. Benefits include free delivery and shipping, a 'Spend Analytics” feature, special discounts, deals and tax-exempt shopping.
Special TechSoup offer for a free 180 days membership, and up to $150 in discounts on eligible orders.
Spark Good (walmart.com/sparkgood) is a charitable platform that enables nonprofits to receive donations directly from customers and associates.
Answers about how you can do more with Walmart!"
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Aberdeen
Advanced Java[Extra Concepts, Not Difficult].docx
This is part 2 of my Java Learning Journey. This contains Hashing, ArrayList, LinkedList, Date and Time Classes, Calendar Class and more.
Recently uploaded (20)
spot a liar (Haiqa 146).pptx Technical writhing and presentation skills
spot a liar (Haiqa 146).pptx Technical writhing and presentation skills
Beyond Degrees - Empowering the Workforce in the Context of Skills-First.pptx
Beyond Degrees - Empowering the Workforce in the Context of Skills-First.pptx
Leveraging Generative AI to Drive Nonprofit Innovation
Leveraging Generative AI to Drive Nonprofit Innovation
South African Journal of Science: Writing with integrity workshop (2024)
South African Journal of Science: Writing with integrity workshop (2024)
Traditional Musical Instruments of Arunachal Pradesh and Uttar Pradesh - RAYH...
Traditional Musical Instruments of Arunachal Pradesh and Uttar Pradesh - RAYH...
How to Setup Warehouse & Location in Odoo 17 Inventory
How to Setup Warehouse & Location in Odoo 17 Inventory
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 9 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2024-2025 - ...
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 9 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2024-2025 - ...
LAND USE LAND COVER AND NDVI OF MIRZAPUR DISTRICT, UP
LAND USE LAND COVER AND NDVI OF MIRZAPUR DISTRICT, UP
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...
Pengantar Penggunaan Flutter - Dart programming language1.pptx
Pengantar Penggunaan Flutter - Dart programming language1.pptx
Liberal Approach to the Study of Indian Politics.pdf
Liberal Approach to the Study of Indian Politics.pdf
Walmart Business+ and Spark Good for Nonprofits.pdf
Walmart Business+ and Spark Good for Nonprofits.pdf
NEWSPAPERS - QUESTION 1 - REVISION POWERPOINT.pptx
NEWSPAPERS - QUESTION 1 - REVISION POWERPOINT.pptx
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...