Hao Phuong Company is the distributor of industrial power
and automatic products such as: Fuji Electric, Idec Izumi, Kansai Automation, Circutor, Nichifu, TOGI (Toyogiken)... - www.haophuong.com
This document provides specifications for the Nippon Pulse S320 linear shaft motor in 3 variants: S320D, S320T, and S320Q. It lists electrical specifications including continuous and peak forces, currents, resistance, inductance and more. It also provides physical dimensions for the motor like usable stroke length, forcer length and weight, screw pitch, and force-duty curves. Tolerances for dimensions are included.
This document contains contact information and addresses for the company's offices in Hanoi, Cambodia, and Binh Duong. It also lists the company's phone and fax numbers. The final line indicates that the company is a leading industrial electrical equipment distributor in Vietnam.
This document contains contact information for three offices of a company located in Vietnam, Cambodia, and Vietnam. It also includes a price list for molded case circuit breakers and earth leakage circuit breakers from Fuji Electric, with model numbers, rated capacities, currents and prices in Vietnamese Dong. The document aims to provide industrial electrical equipment distribution in Vietnam.
Catalog Contactor ABB - Khởi Động từ ABBThuan Kieu
This document provides information on various control gear products from ABB, including:
- 3 pole contactors ranging from sizes A9 to A110 for controlling 3-phase motors up to 690V AC.
- Accessories for contactors like auxiliary contact blocks, surge suppressors, timers and overload relays.
- Technical details on the contactors like coil voltages, terminal types, mounting dimensions and utilization categories.
- Variants include 4-pole contactors, AC/DC operated versions, and contactors for capacitor switching applications.
Bảng giá Recorder, UPS, Trasformers, PLC, HMI Fuji Electric 2015CTY TNHH HẠO PHƯƠNG
BẢNG GIÁ THIẾT BỊ CÔNG NGHIỆP - TỰ ĐỘNG HÓA
http://haophuong.com/bang-gia-hpc/c145205.html
CTY TNHH HẠO PHƯƠNG
Nhà phân phối thiết bị điện công nghiệp và tự động hóa hàng đầu Việt Nam
Website: www.HaoPhuong.com
CTY TNHH HẠO PHƯƠNG
Nhà phân phối thiết bị điện công nghiệp và tự động hóa hàng đầu Việt Nam
Website: www.HaoPhuong.com
Hao Phuong Company is the distributor of industrial power and automatic products such as: Fuji Electric, Idec Izumi, Kansai Automation, Circutor, Nichifu, TOGI (Toyogiken), Takigen...
This document provides specifications for the Nippon Pulse S160 series linear shaft motors, including dimensions, electrical specifications, force and thermal characteristics, and part numbering information. The linear motors come in three models (S160D, S160T, S160Q) with different continuous forces, stroke lengths up to 1800mm, and customizable configurations. Technical details are given for the motor, sensor and hall effect cabling.
Hao Phuong Company is the distributor of industrial power
and automatic products such as: Fuji Electric, Idec Izumi, Kansai Automation, Circutor, Nichifu, TOGI (Toyogiken)... - www.haophuong.com
This document provides specifications for the Nippon Pulse S320 linear shaft motor in 3 variants: S320D, S320T, and S320Q. It lists electrical specifications including continuous and peak forces, currents, resistance, inductance and more. It also provides physical dimensions for the motor like usable stroke length, forcer length and weight, screw pitch, and force-duty curves. Tolerances for dimensions are included.
This document contains contact information and addresses for the company's offices in Hanoi, Cambodia, and Binh Duong. It also lists the company's phone and fax numbers. The final line indicates that the company is a leading industrial electrical equipment distributor in Vietnam.
This document contains contact information for three offices of a company located in Vietnam, Cambodia, and Vietnam. It also includes a price list for molded case circuit breakers and earth leakage circuit breakers from Fuji Electric, with model numbers, rated capacities, currents and prices in Vietnamese Dong. The document aims to provide industrial electrical equipment distribution in Vietnam.
Catalog Contactor ABB - Khởi Động từ ABBThuan Kieu
This document provides information on various control gear products from ABB, including:
- 3 pole contactors ranging from sizes A9 to A110 for controlling 3-phase motors up to 690V AC.
- Accessories for contactors like auxiliary contact blocks, surge suppressors, timers and overload relays.
- Technical details on the contactors like coil voltages, terminal types, mounting dimensions and utilization categories.
- Variants include 4-pole contactors, AC/DC operated versions, and contactors for capacitor switching applications.
Bảng giá Recorder, UPS, Trasformers, PLC, HMI Fuji Electric 2015CTY TNHH HẠO PHƯƠNG
BẢNG GIÁ THIẾT BỊ CÔNG NGHIỆP - TỰ ĐỘNG HÓA
http://haophuong.com/bang-gia-hpc/c145205.html
CTY TNHH HẠO PHƯƠNG
Nhà phân phối thiết bị điện công nghiệp và tự động hóa hàng đầu Việt Nam
Website: www.HaoPhuong.com
CTY TNHH HẠO PHƯƠNG
Nhà phân phối thiết bị điện công nghiệp và tự động hóa hàng đầu Việt Nam
Website: www.HaoPhuong.com
Hao Phuong Company is the distributor of industrial power and automatic products such as: Fuji Electric, Idec Izumi, Kansai Automation, Circutor, Nichifu, TOGI (Toyogiken), Takigen...
This document provides specifications for the Nippon Pulse S160 series linear shaft motors, including dimensions, electrical specifications, force and thermal characteristics, and part numbering information. The linear motors come in three models (S160D, S160T, S160Q) with different continuous forces, stroke lengths up to 1800mm, and customizable configurations. Technical details are given for the motor, sensor and hall effect cabling.
Mentors Drawing Machine Series Introduction (2).pdfGuGloria
Mentors is a Chinese manufacturer of wire drawing and cable making machines that has exported products to over 20 countries since 2008. Their products include wire drawing machines, annealing machines, bunching and twisting machines, and extruders for making wires and cables. Mentors offers customized machine designs and turnkey production lines to suit customers' needs.
Presentation of G Clef Bending Technologyssuserff8e81
G Clef Bending Technology is a Chinese company that provides CNC roller bending and stretch forming solutions. They offer a range of CNC bending machines and have developed their own control system software. Their machines are used in industries such as automotive, aerospace, and locomotive to bend and form metal parts. G Clef aims to solve customers' bending challenges and provide reliable, high-quality machines and components.
This machine is generally use in electrical and electronics industries for cutting wire in different sizes. Both the terminal of wire would be strip. So such type of wire can be easily use in any machine without doing any manual work. We have various types of Wire cutting and stripping machine available. We deliver products all over in India. We have more than 150000+ products. Also we deals with top MNC's company in India. Mention price may be different according to products. Also we can customize products as per client need
18V Slitting shear used for multiple industries for cold cutting on building sites and factories. The tool is designed primarily for the Ducting Trade.
Presentation about steel framing machine from www.large-span.com
contact us by info@large-span.com largespangroup@gmail.com
LARGE SPAN GROUP
TEL: 0086-13333016262, 18731151165
FAX: 0086-18032909635, 18032909637
EMAIL: largespangroup@gmail.com, info@large-span.com
Presentation about Light gauge steel framing machine from www.large-span.com
contact us by info@large-span.com largespangroup@gmail.com
LARGE SPAN GROUP
TEL: 0086-13333016262, 18731151165
FAX: 0086-18032909635, 18032909637
EMAIL: largespangroup@gmail.com, info@large-span.com
Large-Span group is big stated owned corporation established over 30 years and has certificated by BV, TUV, SGS inspection. As one of the most famous manufacturers in China, we have committed ourselves to developing and producing high quality products, professional suggestions and good services for customers all over the world.
Presentation about Light gauge steel framing machine from www.large-span.com
contact us by info@large-span.com largespangroup@gmail.com
LARGE SPAN GROUP
TEL: 0086-13333016262, 18731151165
FAX: 0086-18032909635, 18032909637
EMAIL: largespangroup@gmail.com, info@large-span.com
1) The document provides specifications for the Nippon Pulse L250 linear shaft motor, including its electrical specifications, thermal specifications, force characteristics, and dimensions.
2) It lists specifications for continuous and peak force, current, resistance, inductance, and other electrical parameters. Thermal specifications include maximum phase temperature and thermal resistance.
3) Force-duty curves are provided graphing force and duty cycle at different temperatures to show the motor's force capabilities over time at various loads. Physical dimensions listed include forcer length, screw pitch, shaft length, stroke length, and tolerances.
- The document describes the ROBO Cylinder RCP2-RA8C/RA8R rod type actuators, which have an 85mm width.
- A new RA8 size has been added to the RCP2 series to expand the lineup, with a pushing force of 1714N.
- The document provides details on specifications, dimensions, controller options and selection guides for determining push force and payload based on speed.
Professional manufacturer and supplier of Ratchet Crimping Pliers, Cable Cutters, Wire Strippers, Hydraulic Cable Crimping Tools, Cable Tie Tools, Cable Strippers and Cable Knives.
This document provides specifications for the RCP2-SA6C ROBO Cylinder slider type actuator. It includes details on the pulse motor and load capacity in relation to speed, dimensions and weights by stroke length, compatible controller options, and configuration naming conventions. Load capacity decreases at higher speeds due to the pulse motor characteristics, and specifications like maximum speed vary depending on the stroke length.
This document provides specifications for the Nippon Pulse L320 series linear shaft motors in three models: L320D, L320T, and L320Q. It includes details on dimensions, performance characteristics like force and current ratings, electrical properties, thermal properties, and part numbering conventions. Stroke lengths between 100-3650mm are available.
This document provides information on various proximity sensors available from Schneider Electric, including:
- Rectangular and cylindrical inductive proximity sensors with fixed and adjustable sensing ranges in different sizes and connection options.
- Miniature, compact, and classic rectangular proximity sensors, both shielded and unshielded.
- Long range, block style, and application specific rectangular proximity sensors.
- Cylindrical proximity sensors in various barrel diameters and styles, as well as rectangular, capacitive, magnet actuated, and rotation control proximity sensors.
The document contains tables comparing the technical specifications of the different sensor models such as dimensions, sensing distances, operating voltages, enclosures, connections, and temperature ratings. Catalog
Mecatraction - Cable Crimps, Connectors, Splices & Crimping Tools.
Founded in 1981, MECATRACTION quickly grew both in the domestic market and export markets. We are based in Pompadour, France, in premises of more than 8100 m2. MECATRACTION designs, develops and produces a complete range of components for industrial electrical connections.
MECATRACTION is a subsidiary of the Sicame group.
The Sicame group specializes in accessories for the transport and the transmission of electrical power.
MECATRACTION has forged a position for itself in many sectors of industry that demand know-how, precision and efficiency through the quality of our products and our capacity for innovation.
These sectors include the rail, automotive, aeronautic, space, nuclear, renewable energies, shipping and defence industries
A complete range of products:
Insulated and non insulated terminals
End sleeves
Earthing connections and mechanical connectors
Copper tubular lugs and butt connectors
Cable ties and accessories
Heat-shrink tubing
Tooling and accessories
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.org
The document provides a catalog for electric equipment including contactors, overload relays, starters, and accessories. It includes:
- Descriptions and specifications for various contactors, overload relays, starters, and accessories ranging from mini contactors up to 800A.
- Numbering systems for identifying part types and specifications like voltage, current rating, and number of poles.
- Layout diagrams showing common configurations for mounting contactors and accessories.
- Technical information on features of thermal and electronic overload relays, digital motor protection relays, and environmental compliance.
- Quick selection tables to choose the right contactor or overload relay for an application.
The document provides information about TRUMPF power tools for roofing and facade work. It describes several cutting and shearing tools, including slitting shears that can cut materials up to 2.5mm thick. It also details nibblers that can cut a variety of metal materials and profiles. Technical specifications are provided for each tool, including maximum material thickness, battery life, weight and included accessories. Contact information is given for TRUMPF locations in Switzerland and the UK.
This document provides specifications for Nippon Pulse linear shaft motors, including the S120D, S120T, and S120Q models. It lists technical details such as continuous and peak forces, resistance, inductance, and more. Dimensions for the forcer length, width, and screw pitch are provided for each motor model. Force versus duty curves are displayed for the S120D and S120Q.
Presentation about Roll forming machine technical data from www.large-span.com
contact us by info@large-span.com largespangroup@gmail.com
LARGE SPAN GROUP
TEL: 0086-13333016262, 18731151165
FAX: 0086-18032909635, 18032909637
EMAIL: largespangroup@gmail.com, info@large-span.com
Presentation about Roll forming machine technical data from www.large-span.com
contact us by info@large-span.com largespangroup@gmail.com
LARGE SPAN GROUP
TEL: 0086-13333016262, 18731151165
FAX: 0086-18032909635, 18032909637
EMAIL: largespangroup@gmail.com, info@large-span.com
hematic appreciation test is a psychological assessment tool used to measure an individual's appreciation and understanding of specific themes or topics. This test helps to evaluate an individual's ability to connect different ideas and concepts within a given theme, as well as their overall comprehension and interpretation skills. The results of the test can provide valuable insights into an individual's cognitive abilities, creativity, and critical thinking skills
ESR spectroscopy in liquid food and beverages.pptxPRIYANKA PATEL
With increasing population, people need to rely on packaged food stuffs. Packaging of food materials requires the preservation of food. There are various methods for the treatment of food to preserve them and irradiation treatment of food is one of them. It is the most common and the most harmless method for the food preservation as it does not alter the necessary micronutrients of food materials. Although irradiated food doesn’t cause any harm to the human health but still the quality assessment of food is required to provide consumers with necessary information about the food. ESR spectroscopy is the most sophisticated way to investigate the quality of the food and the free radicals induced during the processing of the food. ESR spin trapping technique is useful for the detection of highly unstable radicals in the food. The antioxidant capability of liquid food and beverages in mainly performed by spin trapping technique.
Mentors Drawing Machine Series Introduction (2).pdfGuGloria
Mentors is a Chinese manufacturer of wire drawing and cable making machines that has exported products to over 20 countries since 2008. Their products include wire drawing machines, annealing machines, bunching and twisting machines, and extruders for making wires and cables. Mentors offers customized machine designs and turnkey production lines to suit customers' needs.
Presentation of G Clef Bending Technologyssuserff8e81
G Clef Bending Technology is a Chinese company that provides CNC roller bending and stretch forming solutions. They offer a range of CNC bending machines and have developed their own control system software. Their machines are used in industries such as automotive, aerospace, and locomotive to bend and form metal parts. G Clef aims to solve customers' bending challenges and provide reliable, high-quality machines and components.
This machine is generally use in electrical and electronics industries for cutting wire in different sizes. Both the terminal of wire would be strip. So such type of wire can be easily use in any machine without doing any manual work. We have various types of Wire cutting and stripping machine available. We deliver products all over in India. We have more than 150000+ products. Also we deals with top MNC's company in India. Mention price may be different according to products. Also we can customize products as per client need
18V Slitting shear used for multiple industries for cold cutting on building sites and factories. The tool is designed primarily for the Ducting Trade.
Presentation about steel framing machine from www.large-span.com
contact us by info@large-span.com largespangroup@gmail.com
LARGE SPAN GROUP
TEL: 0086-13333016262, 18731151165
FAX: 0086-18032909635, 18032909637
EMAIL: largespangroup@gmail.com, info@large-span.com
Presentation about Light gauge steel framing machine from www.large-span.com
contact us by info@large-span.com largespangroup@gmail.com
LARGE SPAN GROUP
TEL: 0086-13333016262, 18731151165
FAX: 0086-18032909635, 18032909637
EMAIL: largespangroup@gmail.com, info@large-span.com
Large-Span group is big stated owned corporation established over 30 years and has certificated by BV, TUV, SGS inspection. As one of the most famous manufacturers in China, we have committed ourselves to developing and producing high quality products, professional suggestions and good services for customers all over the world.
Presentation about Light gauge steel framing machine from www.large-span.com
contact us by info@large-span.com largespangroup@gmail.com
LARGE SPAN GROUP
TEL: 0086-13333016262, 18731151165
FAX: 0086-18032909635, 18032909637
EMAIL: largespangroup@gmail.com, info@large-span.com
1) The document provides specifications for the Nippon Pulse L250 linear shaft motor, including its electrical specifications, thermal specifications, force characteristics, and dimensions.
2) It lists specifications for continuous and peak force, current, resistance, inductance, and other electrical parameters. Thermal specifications include maximum phase temperature and thermal resistance.
3) Force-duty curves are provided graphing force and duty cycle at different temperatures to show the motor's force capabilities over time at various loads. Physical dimensions listed include forcer length, screw pitch, shaft length, stroke length, and tolerances.
- The document describes the ROBO Cylinder RCP2-RA8C/RA8R rod type actuators, which have an 85mm width.
- A new RA8 size has been added to the RCP2 series to expand the lineup, with a pushing force of 1714N.
- The document provides details on specifications, dimensions, controller options and selection guides for determining push force and payload based on speed.
Professional manufacturer and supplier of Ratchet Crimping Pliers, Cable Cutters, Wire Strippers, Hydraulic Cable Crimping Tools, Cable Tie Tools, Cable Strippers and Cable Knives.
This document provides specifications for the RCP2-SA6C ROBO Cylinder slider type actuator. It includes details on the pulse motor and load capacity in relation to speed, dimensions and weights by stroke length, compatible controller options, and configuration naming conventions. Load capacity decreases at higher speeds due to the pulse motor characteristics, and specifications like maximum speed vary depending on the stroke length.
This document provides specifications for the Nippon Pulse L320 series linear shaft motors in three models: L320D, L320T, and L320Q. It includes details on dimensions, performance characteristics like force and current ratings, electrical properties, thermal properties, and part numbering conventions. Stroke lengths between 100-3650mm are available.
This document provides information on various proximity sensors available from Schneider Electric, including:
- Rectangular and cylindrical inductive proximity sensors with fixed and adjustable sensing ranges in different sizes and connection options.
- Miniature, compact, and classic rectangular proximity sensors, both shielded and unshielded.
- Long range, block style, and application specific rectangular proximity sensors.
- Cylindrical proximity sensors in various barrel diameters and styles, as well as rectangular, capacitive, magnet actuated, and rotation control proximity sensors.
The document contains tables comparing the technical specifications of the different sensor models such as dimensions, sensing distances, operating voltages, enclosures, connections, and temperature ratings. Catalog
Mecatraction - Cable Crimps, Connectors, Splices & Crimping Tools.
Founded in 1981, MECATRACTION quickly grew both in the domestic market and export markets. We are based in Pompadour, France, in premises of more than 8100 m2. MECATRACTION designs, develops and produces a complete range of components for industrial electrical connections.
MECATRACTION is a subsidiary of the Sicame group.
The Sicame group specializes in accessories for the transport and the transmission of electrical power.
MECATRACTION has forged a position for itself in many sectors of industry that demand know-how, precision and efficiency through the quality of our products and our capacity for innovation.
These sectors include the rail, automotive, aeronautic, space, nuclear, renewable energies, shipping and defence industries
A complete range of products:
Insulated and non insulated terminals
End sleeves
Earthing connections and mechanical connectors
Copper tubular lugs and butt connectors
Cable ties and accessories
Heat-shrink tubing
Tooling and accessories
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.org
The document provides a catalog for electric equipment including contactors, overload relays, starters, and accessories. It includes:
- Descriptions and specifications for various contactors, overload relays, starters, and accessories ranging from mini contactors up to 800A.
- Numbering systems for identifying part types and specifications like voltage, current rating, and number of poles.
- Layout diagrams showing common configurations for mounting contactors and accessories.
- Technical information on features of thermal and electronic overload relays, digital motor protection relays, and environmental compliance.
- Quick selection tables to choose the right contactor or overload relay for an application.
The document provides information about TRUMPF power tools for roofing and facade work. It describes several cutting and shearing tools, including slitting shears that can cut materials up to 2.5mm thick. It also details nibblers that can cut a variety of metal materials and profiles. Technical specifications are provided for each tool, including maximum material thickness, battery life, weight and included accessories. Contact information is given for TRUMPF locations in Switzerland and the UK.
This document provides specifications for Nippon Pulse linear shaft motors, including the S120D, S120T, and S120Q models. It lists technical details such as continuous and peak forces, resistance, inductance, and more. Dimensions for the forcer length, width, and screw pitch are provided for each motor model. Force versus duty curves are displayed for the S120D and S120Q.
Presentation about Roll forming machine technical data from www.large-span.com
contact us by info@large-span.com largespangroup@gmail.com
LARGE SPAN GROUP
TEL: 0086-13333016262, 18731151165
FAX: 0086-18032909635, 18032909637
EMAIL: largespangroup@gmail.com, info@large-span.com
Presentation about Roll forming machine technical data from www.large-span.com
contact us by info@large-span.com largespangroup@gmail.com
LARGE SPAN GROUP
TEL: 0086-13333016262, 18731151165
FAX: 0086-18032909635, 18032909637
EMAIL: largespangroup@gmail.com, info@large-span.com
hematic appreciation test is a psychological assessment tool used to measure an individual's appreciation and understanding of specific themes or topics. This test helps to evaluate an individual's ability to connect different ideas and concepts within a given theme, as well as their overall comprehension and interpretation skills. The results of the test can provide valuable insights into an individual's cognitive abilities, creativity, and critical thinking skills
ESR spectroscopy in liquid food and beverages.pptxPRIYANKA PATEL
With increasing population, people need to rely on packaged food stuffs. Packaging of food materials requires the preservation of food. There are various methods for the treatment of food to preserve them and irradiation treatment of food is one of them. It is the most common and the most harmless method for the food preservation as it does not alter the necessary micronutrients of food materials. Although irradiated food doesn’t cause any harm to the human health but still the quality assessment of food is required to provide consumers with necessary information about the food. ESR spectroscopy is the most sophisticated way to investigate the quality of the food and the free radicals induced during the processing of the food. ESR spin trapping technique is useful for the detection of highly unstable radicals in the food. The antioxidant capability of liquid food and beverages in mainly performed by spin trapping technique.
Travis Hills' Endeavors in Minnesota: Fostering Environmental and Economic Pr...Travis Hills MN
Travis Hills of Minnesota developed a method to convert waste into high-value dry fertilizer, significantly enriching soil quality. By providing farmers with a valuable resource derived from waste, Travis Hills helps enhance farm profitability while promoting environmental stewardship. Travis Hills' sustainable practices lead to cost savings and increased revenue for farmers by improving resource efficiency and reducing waste.
ESPP presentation to EU Waste Water Network, 4th June 2024 “EU policies driving nutrient removal and recycling
and the revised UWWTD (Urban Waste Water Treatment Directive)”
Authoring a personal GPT for your research and practice: How we created the Q...Leonel Morgado
Thematic analysis in qualitative research is a time-consuming and systematic task, typically done using teams. Team members must ground their activities on common understandings of the major concepts underlying the thematic analysis, and define criteria for its development. However, conceptual misunderstandings, equivocations, and lack of adherence to criteria are challenges to the quality and speed of this process. Given the distributed and uncertain nature of this process, we wondered if the tasks in thematic analysis could be supported by readily available artificial intelligence chatbots. Our early efforts point to potential benefits: not just saving time in the coding process but better adherence to criteria and grounding, by increasing triangulation between humans and artificial intelligence. This tutorial will provide a description and demonstration of the process we followed, as two academic researchers, to develop a custom ChatGPT to assist with qualitative coding in the thematic data analysis process of immersive learning accounts in a survey of the academic literature: QUAL-E Immersive Learning Thematic Analysis Helper. In the hands-on time, participants will try out QUAL-E and develop their ideas for their own qualitative coding ChatGPT. Participants that have the paid ChatGPT Plus subscription can create a draft of their assistants. The organizers will provide course materials and slide deck that participants will be able to utilize to continue development of their custom GPT. The paid subscription to ChatGPT Plus is not required to participate in this workshop, just for trying out personal GPTs during it.
When I was asked to give a companion lecture in support of ‘The Philosophy of Science’ (https://shorturl.at/4pUXz) I decided not to walk through the detail of the many methodologies in order of use. Instead, I chose to employ a long standing, and ongoing, scientific development as an exemplar. And so, I chose the ever evolving story of Thermodynamics as a scientific investigation at its best.
Conducted over a period of >200 years, Thermodynamics R&D, and application, benefitted from the highest levels of professionalism, collaboration, and technical thoroughness. New layers of application, methodology, and practice were made possible by the progressive advance of technology. In turn, this has seen measurement and modelling accuracy continually improved at a micro and macro level.
Perhaps most importantly, Thermodynamics rapidly became a primary tool in the advance of applied science/engineering/technology, spanning micro-tech, to aerospace and cosmology. I can think of no better a story to illustrate the breadth of scientific methodologies and applications at their best.
Phenomics assisted breeding in crop improvementIshaGoswami9
As the population is increasing and will reach about 9 billion upto 2050. Also due to climate change, it is difficult to meet the food requirement of such a large population. Facing the challenges presented by resource shortages, climate
change, and increasing global population, crop yield and quality need to be improved in a sustainable way over the coming decades. Genetic improvement by breeding is the best way to increase crop productivity. With the rapid progression of functional
genomics, an increasing number of crop genomes have been sequenced and dozens of genes influencing key agronomic traits have been identified. However, current genome sequence information has not been adequately exploited for understanding
the complex characteristics of multiple gene, owing to a lack of crop phenotypic data. Efficient, automatic, and accurate technologies and platforms that can capture phenotypic data that can
be linked to genomics information for crop improvement at all growth stages have become as important as genotyping. Thus,
high-throughput phenotyping has become the major bottleneck restricting crop breeding. Plant phenomics has been defined as the high-throughput, accurate acquisition and analysis of multi-dimensional phenotypes
during crop growing stages at the organism level, including the cell, tissue, organ, individual plant, plot, and field levels. With the rapid development of novel sensors, imaging technology,
and analysis methods, numerous infrastructure platforms have been developed for phenotyping.
Immersive Learning That Works: Research Grounding and Paths ForwardLeonel Morgado
We will metaverse into the essence of immersive learning, into its three dimensions and conceptual models. This approach encompasses elements from teaching methodologies to social involvement, through organizational concerns and technologies. Challenging the perception of learning as knowledge transfer, we introduce a 'Uses, Practices & Strategies' model operationalized by the 'Immersive Learning Brain' and ‘Immersion Cube’ frameworks. This approach offers a comprehensive guide through the intricacies of immersive educational experiences and spotlighting research frontiers, along the immersion dimensions of system, narrative, and agency. Our discourse extends to stakeholders beyond the academic sphere, addressing the interests of technologists, instructional designers, and policymakers. We span various contexts, from formal education to organizational transformation to the new horizon of an AI-pervasive society. This keynote aims to unite the iLRN community in a collaborative journey towards a future where immersive learning research and practice coalesce, paving the way for innovative educational research and practice landscapes.
EWOCS-I: The catalog of X-ray sources in Westerlund 1 from the Extended Weste...Sérgio Sacani
Context. With a mass exceeding several 104 M⊙ and a rich and dense population of massive stars, supermassive young star clusters
represent the most massive star-forming environment that is dominated by the feedback from massive stars and gravitational interactions
among stars.
Aims. In this paper we present the Extended Westerlund 1 and 2 Open Clusters Survey (EWOCS) project, which aims to investigate
the influence of the starburst environment on the formation of stars and planets, and on the evolution of both low and high mass stars.
The primary targets of this project are Westerlund 1 and 2, the closest supermassive star clusters to the Sun.
Methods. The project is based primarily on recent observations conducted with the Chandra and JWST observatories. Specifically,
the Chandra survey of Westerlund 1 consists of 36 new ACIS-I observations, nearly co-pointed, for a total exposure time of 1 Msec.
Additionally, we included 8 archival Chandra/ACIS-S observations. This paper presents the resulting catalog of X-ray sources within
and around Westerlund 1. Sources were detected by combining various existing methods, and photon extraction and source validation
were carried out using the ACIS-Extract software.
Results. The EWOCS X-ray catalog comprises 5963 validated sources out of the 9420 initially provided to ACIS-Extract, reaching a
photon flux threshold of approximately 2 × 10−8 photons cm−2
s
−1
. The X-ray sources exhibit a highly concentrated spatial distribution,
with 1075 sources located within the central 1 arcmin. We have successfully detected X-ray emissions from 126 out of the 166 known
massive stars of the cluster, and we have collected over 71 000 photons from the magnetar CXO J164710.20-455217.
The binding of cosmological structures by massless topological defectsSérgio Sacani
Assuming spherical symmetry and weak field, it is shown that if one solves the Poisson equation or the Einstein field
equations sourced by a topological defect, i.e. a singularity of a very specific form, the result is a localized gravitational
field capable of driving flat rotation (i.e. Keplerian circular orbits at a constant speed for all radii) of test masses on a thin
spherical shell without any underlying mass. Moreover, a large-scale structure which exploits this solution by assembling
concentrically a number of such topological defects can establish a flat stellar or galactic rotation curve, and can also deflect
light in the same manner as an equipotential (isothermal) sphere. Thus, the need for dark matter or modified gravity theory is
mitigated, at least in part.
2. About us
Shanghai Qiyi Electrical & Mechanical Equipment Co., Ltd. is a professional rotary encoder supplier,
located in Chinese business and port center, Shanghai. CALT brand product ranges: Optical
incremental rotary encoder, single-turn and multi-turn absolute encoder, draw-wire position sensor
and couplings, and other instruments, which widely used in CNC machinery, textile machinery, steel
rolling machinery, linear guide system, hydraulic system, lifting machinery and servo motor, all get a
very good reputation!
Qiyi company has got independent import and export qualification in 2013, CALT brand products have
been exported to Southeast Asia, Europe, America and Russia and other countries and regions in the
world, we are adhering to the idea "credibility first, customer first, win-win cooperation" , strive for
the highest quality products and services to contribute to our customers!
4. Rotary encoder: incremental (1)
Solid shaft Series
Square flange and
socket side
Clamping flange shaft Heavy loaded type Customize flange shaft
Socket back out
Select Guide
Outer dia: 25/30/38/40/44/50/52/58/60mm
Shaft dia: 4~15mm
Resolution: 10~10000PPR
Output form: open collector, PNP, NPN,
RS422, push pull, line drive
Supply voltage: 5V or 5~26V
Email: info@china-encoder.com
5. Rotary encoder: incremental (2)
Hollow shaft Series
40mm hollow shaft
Blind hollow shaft screw setup GSM48 for servoHoop-style flange shaft
Select Guide
Outer dia: 38/44/46/52/60/80/90/100/150mm
Hollow dia: 4/8/10/12/18/30…80mm
Resolution: 10~5000PPR
Output form: open collector, RS422, push pull,
line drive
Supply voltage: 5V or 5~26V
80mm hollow shaft
Email: info@china-encoder.com
6. Rotary encoder: incremental (3)
for small motor only
PD30 with connector pins PD30 with cable
Encoder disc and sensor
Select Guide
Outer dia: 30mm
Hollow dia: 3/4/6/8mm
Resolution: 100…1024PPR
Output form: voltage, line drive
Supply voltage: 5V
Email: info@china-encoder.com
7. Rotary encoder: incremental (4)
HEIDENHAIN encoder for elevator
ERN1387-2048
ID:749144-59
Cable for ERN1387 or ECN1313
Select Guide
TYPE: ERN1387 20148 or ECN1313 2048
Cable for ERN1387 or ECN1313.
Note: the cable length and socket type can
be customized.
ECN1313-2048
ID:768295-54 Open head cable for Heidenhain
Email: info@china-encoder.com
8. Rotary encoder: absolute (1)
Single turn type
Clamping flange /Synchro flange
with coupling
Blind shaft 12mm
Select Guide
Outer dia: 60mm
Shaft dia: 6/8/10/12/15mm
Resolution: 12bit (4096),13bit, 14bit
Output form: SSI, RS485, 4~20mA,
0-5V Parallel, Modbus RTU,
Supply voltage: 10~30Vdc, or 5V
Mini type 38mm outer
6mm shaft
Email: info@china-encoder.com