This document discusses diversity techniques for wireless communication. It begins by describing how wireless communication channels suffer from impairments like fading that degrade system performance. It then explains that diversity techniques address this issue by providing multiple replicas of transmitting signals over different fading channels to a receiver. This reduces the probability that all signals will fade simultaneously. The document outlines different types of diversity techniques and emphasizes that spatial diversity using multiple transmitting and receiving antennas is most popular as it improves performance without requiring extra power or bandwidth. It also discusses diversity combining methods used at receivers to optimize the received signal-to-noise ratio by collecting and combining unfaded signals from different branches.
This document provides an overview of Orthogonal Frequency Division Multiplexing (OFDM), Orthogonal Frequency Division Multiple Access (OFDMA) and Scalable OFDMA (SOFDMA). It describes how OFDM divides available bandwidth into multiple orthogonal subcarriers to combat multipath interference in wireless channels. OFDMA further divides subcarriers to enable multiple access by multiple users. SOFDMA, defined in IEEE 802.16e, allows dynamic allocation of subcarriers for scalable bandwidth allocation to users.
This document discusses various diversity techniques used in wireless communications to combat fading. It describes types of diversity including time, frequency, multiuser, and space diversity. It also outlines combining techniques such as selection combining, maximal ratio combining and equal gain combining that are used to improve the signal by combining signals from multiple diversity branches. The document concludes by discussing multiple input multiple output (MIMO) systems and orthogonal frequency division multiple access (OFDMA) schemes that exploit diversity and multiuser diversity.
The document discusses various topics related to radio wave propagation. It covers the different types of propagation including ground wave, space wave, and sky wave. It describes line of sight propagation and how increasing antenna height allows communication over longer distances. Tropospheric propagation is discussed along with how turbulence in the troposphere can scatter radio waves. The document also covers polarization of radio waves for different propagation types and the advantages of horizontal and vertical polarization. Finally, it defines attenuation and provides examples of attenuation levels through common materials.
Diversity Techniques in Wireless CommunicationSahar Foroughi
This document discusses diversity techniques for wireless communication, including cooperative diversity. It begins by introducing wireless systems and the impairments they face like fading. It then covers various diversity techniques like space, frequency, and time diversity that provide multiple transmission paths to reduce fading. Cooperative diversity is described as allowing single-antenna devices to achieve MIMO-like benefits by sharing antennas. The document outlines cooperative transmission protocols and challenges at different network layers in implementing cooperation. In conclusion, diversity techniques improve performance by providing multiple signal replicas to overcome fading, while cooperation enables reliability and throughput gains with challenges to address across protocol layers.
This document discusses point to point microwave transmission. It describes the basic modules of microwave radio terminals including digital modems, RF units, and passive parabolic antennas. It also covers microwave radio configurations, applications, advantages, planning aspects like network architecture, frequency bands, and propagation effects. Key factors in microwave link engineering like link budgets, reliability predictions, and interference analysis are summarized.
Orthogonal Frequency Division Multiplexing (OFDM)Gagan Randhawa
The document discusses Orthogonal Frequency Division Multiplexing (OFDM), including its principles, advantages, disadvantages and applications. OFDM divides the available spectrum into multiple orthogonal subcarriers, each modulated with a low data rate stream. This makes OFDM robust to multipath fading and intersymbol interference. While OFDM provides high data rates and spectral efficiency, it suffers from issues like high peak-to-average power ratio and sensitivity to frequency errors. OFDM is used in technologies like WiFi, WiMAX and digital audio/video broadcasting.
Diversity Techniques in mobile communicationsDiwaker Pant
The document discusses diversity techniques in wireless communication. It introduces different types of diversity including frequency diversity and time diversity. Frequency diversity involves transmitting the same information over multiple carrier frequencies separated by more than the coherence bandwidth. Time diversity involves repeated transmission of information with time spacing exceeding the channel coherence time. The document provides examples of how techniques like frequency division multiplexing and rake receivers implement frequency and time diversity respectively.
This document provides an overview of Orthogonal Frequency Division Multiplexing (OFDM), Orthogonal Frequency Division Multiple Access (OFDMA) and Scalable OFDMA (SOFDMA). It describes how OFDM divides available bandwidth into multiple orthogonal subcarriers to combat multipath interference in wireless channels. OFDMA further divides subcarriers to enable multiple access by multiple users. SOFDMA, defined in IEEE 802.16e, allows dynamic allocation of subcarriers for scalable bandwidth allocation to users.
This document discusses various diversity techniques used in wireless communications to combat fading. It describes types of diversity including time, frequency, multiuser, and space diversity. It also outlines combining techniques such as selection combining, maximal ratio combining and equal gain combining that are used to improve the signal by combining signals from multiple diversity branches. The document concludes by discussing multiple input multiple output (MIMO) systems and orthogonal frequency division multiple access (OFDMA) schemes that exploit diversity and multiuser diversity.
The document discusses various topics related to radio wave propagation. It covers the different types of propagation including ground wave, space wave, and sky wave. It describes line of sight propagation and how increasing antenna height allows communication over longer distances. Tropospheric propagation is discussed along with how turbulence in the troposphere can scatter radio waves. The document also covers polarization of radio waves for different propagation types and the advantages of horizontal and vertical polarization. Finally, it defines attenuation and provides examples of attenuation levels through common materials.
Diversity Techniques in Wireless CommunicationSahar Foroughi
This document discusses diversity techniques for wireless communication, including cooperative diversity. It begins by introducing wireless systems and the impairments they face like fading. It then covers various diversity techniques like space, frequency, and time diversity that provide multiple transmission paths to reduce fading. Cooperative diversity is described as allowing single-antenna devices to achieve MIMO-like benefits by sharing antennas. The document outlines cooperative transmission protocols and challenges at different network layers in implementing cooperation. In conclusion, diversity techniques improve performance by providing multiple signal replicas to overcome fading, while cooperation enables reliability and throughput gains with challenges to address across protocol layers.
This document discusses point to point microwave transmission. It describes the basic modules of microwave radio terminals including digital modems, RF units, and passive parabolic antennas. It also covers microwave radio configurations, applications, advantages, planning aspects like network architecture, frequency bands, and propagation effects. Key factors in microwave link engineering like link budgets, reliability predictions, and interference analysis are summarized.
Orthogonal Frequency Division Multiplexing (OFDM)Gagan Randhawa
The document discusses Orthogonal Frequency Division Multiplexing (OFDM), including its principles, advantages, disadvantages and applications. OFDM divides the available spectrum into multiple orthogonal subcarriers, each modulated with a low data rate stream. This makes OFDM robust to multipath fading and intersymbol interference. While OFDM provides high data rates and spectral efficiency, it suffers from issues like high peak-to-average power ratio and sensitivity to frequency errors. OFDM is used in technologies like WiFi, WiMAX and digital audio/video broadcasting.
Diversity Techniques in mobile communicationsDiwaker Pant
The document discusses diversity techniques in wireless communication. It introduces different types of diversity including frequency diversity and time diversity. Frequency diversity involves transmitting the same information over multiple carrier frequencies separated by more than the coherence bandwidth. Time diversity involves repeated transmission of information with time spacing exceeding the channel coherence time. The document provides examples of how techniques like frequency division multiplexing and rake receivers implement frequency and time diversity respectively.
Small scale fading, also known as fading, describes the rapid fluctuations of signal amplitude and phase over short periods of time. It is caused by interference between multiple versions of a transmitted signal that take different paths to the receiver. This can result in changes to amplitude, phase, and time of arrival depending on factors like multipath propagation, Doppler shifts from mobile speed, movement of surrounding objects, and the signal bandwidth.
Ground wave propagation, Sky wave propagation, Space Wave propagation, Multi hop propagation, Duct wave propagation, LOS propagation, Ionospheric Layers
This document summarizes several indoor propagation models. It begins with introducing path loss factors like reflection, diffraction, and scattering. It then describes the ITU indoor path loss model, log-distance path loss model, and Ericsson multiple breakpoint model. The ITU model calculates path loss based on frequency, distance, and floor number. The log-distance model uses a path loss exponent to estimate loss over distance. The Ericsson model provides upper and lower loss bounds based on measurements in an office building.
Loss of strength, A periodic reduction in the received strength of a radio transmission.
This is about the phenomenon of loss of signal in telecommunications.Fading refers to the
time variation of the received signal power caused by changes in the transmission medium or path.
OFDMA - Orthogonal Frequency Division Multiple Access PPT by PREM KAMALprem kamal
This document discusses Orthogonal Frequency Division Multiple Access (OFDMA), a multiple access technique used in wireless communication. OFDMA is a specialized version of Frequency Division Multiple Access (FDMA) where all subcarriers within a channel are orthogonal to each other, allowing them to overlap without interference. This allows for more efficient spectrum usage than traditional FDMA. OFDMA was introduced in the 1960s-70s and has since been used in technologies like Wi-Fi, WiMAX, LTE, and is being researched for future 5G networks due to its ability to support high-speed data transmission.
This document provides an overview of equalization and diversity techniques used in mobile communication systems. It discusses how equalization is used to compensate for intersymbol interference caused by multipath fading. Linear equalizers aim to minimize mean square error, while nonlinear equalizers also use decision feedback. Common equalizer structures include transversal filters adapted using algorithms like LMS or RLS. Diversity techniques like spatial or frequency diversity compensate for fading by combining signals from multiple antennas or frequency bands. Channel coding adds redundancy to improve link performance in the presence of errors.
Orthogonal Frequency Division Multiple Access (OFDMA) is a multiple access technique that uses OFDM and FDMA. It divides the available bandwidth into multiple orthogonal subcarriers, assigning subsets of subcarriers to individual users. This allows for efficient use of spectrum and multi-user diversity. OFDMA provides better performance in fading environments compared to CDMA. However, it suffers from high peak-to-average power ratio and requires tight synchronization between users. OFDMA is used in wireless standards like WiMax due to its ability to support high data rates and combat intersymbol interference.
By completing this presentation will be have a clear idea about Antenna's working principles, Antenna's Types & Antenna's Parameters. At the end to this document you'll have a brief idea about Antenna's Tilt vs Distance Calculation & Cluster wise optimum Antenna Selection procedure. Impact of antenna PIM & VSWR have been described elaborately in this document as well.
- The document discusses wireless channel propagation and fading. It covers topics like large-scale fading (path loss and shadowing), small-scale fading (time-selective and frequency-selective fading), and statistical characterization of fading channels.
- Small-scale fading is caused by multipath propagation and results in rapid fluctuations in the strength of the received signal over short periods of time or travel distances. It can be time-selective or frequency-selective depending on delay spread and Doppler spread.
- Common distributions for modeling fading amplitudes are Rayleigh for non-line-of-sight environments and Rician when there is a dominant line-of-sight path. The document presents models for generating both Rayleigh and Rician fading
Wireless communication transfers information between points without a wired connection. A transmitter sends electromagnetic waves through the air medium to a receiver. Radio propagation allows signals to travel from the transmitter in three modes: direct, ground wave, and sky wave. Multipath propagation occurs when signals reach the receiver along multiple paths, which can cause constructive or destructive interference. Fading describes signal attenuation over time due to factors like multipath delay spread, Doppler spread from mobility, rain, obstacles, and frequency. Shadowing also reduces signal strength from blockage by objects along the transmission path.
Ultra-wideband (UWB) antennas must transmit very short pulse signals accurately and efficiently. The document discusses various types of UWB antennas including traveling-wave antennas like horn antennas, frequency-independent antennas whose radiation patterns do not change with frequency, self-complementary antennas with constant input impedance regardless of frequency or shape, multiple resonance antennas made of multiple narrowband elements, and electrically small antennas. Key antenna characterization parameters in time and frequency domains are also presented.
Its a good presentation on Antenna topic because every one is know that in electrical engineering antenna is a complete subject & its too much difficult subject of electrical engineering....I hope this ppt slides helpful in your future...Thanks A lot guys.......
KINDLY REGARDS
KHAWAJA SHAHBAZ IQBAL
ELECTRICAL ENGINEER
UNIVERSITY OF CENTRAL PUNJAB ,LAHORE ,PAKISTAN
+923360690272
- Antennas convert electric currents into radio waves and vice versa. They are used in various technologies including radio, television, mobile phones, WiFi, and radar.
- The first antennas were built in 1888 by Heinrich Hertz to transmit and receive electromagnetic waves. Modern antennas come in different types for applications like broadcasting, communications, and space exploration.
- Antennas work by using an oscillating current to generate oscillating electric and magnetic fields that propagate as radio waves. During reception, the antenna intercepts some power from incoming radio waves to produce a voltage for the receiver.
Radio waves can propagate between two points through four main ways: directly, following the curvature of the Earth, becoming trapped in the atmosphere, or refracting off the ionosphere. Propagation modes include ground-wave, sky-wave, and space-wave propagation. Mobile radio propagation is influenced by factors like reflections, scattering, diffraction, and the electromagnetic properties of materials. Proper propagation modeling is important for wireless system design and performance.
In Frequency-division multiple access (FDMA), the available channel bandwidth is divided into many non overlapping frequency bands, where each band is dynamically assigned to a specific user to transmit data.
Like FDM, OFDM uses multiple subcarriers BUT:
There are closely spaces to each other without causing interference, removing guard bands.
Its possible because subcarriers are orthogonal.
OFDMA allocates multi-user in time domain as well in frequency domain. OFDMA is a very popular Multiplexing method used for many of the latest wireless and telecommunication standards,
An antenna converts radio frequency electric current into electromagnetic waves that are radiated into space. The same antenna can transmit and receive signals. Key antenna concepts include reciprocity, radiation patterns, gain, and polarization. Antenna gain compares its power output to an isotropic antenna. Common antennas include dipole, parabolic reflective, and types are optimized for propagation modes like ground wave, sky wave, and line-of-sight. Signal strength is reduced by factors like free space loss, noise, multipath, and fading over the transmission path.
Introduction To Wireless Fading ChannelsNitin Jain
The document summarizes key concepts related to wireless fading channels, including:
1. Multipath fading causes fluctuations in signal strength over small physical distances due to constructive and destructive interference from multiple signal paths.
2. Rayleigh fading occurs when there is no line-of-sight path between transmitter and receiver, resulting in fast, large fluctuations in signal strength over small physical distances.
3. Doppler spread and coherence time describe how quickly the wireless channel varies over time due to mobility, with fast fading occurring if the channel changes significantly within a symbol period.
Small-scale fading in wireless channels is caused by multipath propagation. There are three main effects: rapid signal strength changes over small distances/times, random Doppler shifts from multipath signals, and time dispersion of echoes. Multipath results from reflection, diffraction and scattering off surroundings. Several methods measure multipath structure including direct RF pulse systems, spread spectrum sliding correlators, and frequency domain channel sounding using vector network analyzers. These techniques help determine power delay profiles and understand time-varying multipath effects.
IJERA (International journal of Engineering Research and Applications) is International online, ... peer reviewed journal. For more detail or submit your article, please visit www.ijera.com
Improved linearization of laser source and erbium dopedIAEME Publication
This document discusses techniques to reduce nonlinear distortion in Radio over Fiber (RoF) systems. It summarizes:
1) Predistortion is used to reduce nonlinearity introduced by the laser source. By introducing a predistortion circuit in front of the laser, its nonlinearity can be reduced.
2) Feedforward technique is employed to reduce nonlinear distortion in erbium doped fiber amplifiers (EDFAs).
3) Both techniques are analyzed individually and their combined effect is investigated to minimize nonlinear distortion in RoF systems.
Small scale fading, also known as fading, describes the rapid fluctuations of signal amplitude and phase over short periods of time. It is caused by interference between multiple versions of a transmitted signal that take different paths to the receiver. This can result in changes to amplitude, phase, and time of arrival depending on factors like multipath propagation, Doppler shifts from mobile speed, movement of surrounding objects, and the signal bandwidth.
Ground wave propagation, Sky wave propagation, Space Wave propagation, Multi hop propagation, Duct wave propagation, LOS propagation, Ionospheric Layers
This document summarizes several indoor propagation models. It begins with introducing path loss factors like reflection, diffraction, and scattering. It then describes the ITU indoor path loss model, log-distance path loss model, and Ericsson multiple breakpoint model. The ITU model calculates path loss based on frequency, distance, and floor number. The log-distance model uses a path loss exponent to estimate loss over distance. The Ericsson model provides upper and lower loss bounds based on measurements in an office building.
Loss of strength, A periodic reduction in the received strength of a radio transmission.
This is about the phenomenon of loss of signal in telecommunications.Fading refers to the
time variation of the received signal power caused by changes in the transmission medium or path.
OFDMA - Orthogonal Frequency Division Multiple Access PPT by PREM KAMALprem kamal
This document discusses Orthogonal Frequency Division Multiple Access (OFDMA), a multiple access technique used in wireless communication. OFDMA is a specialized version of Frequency Division Multiple Access (FDMA) where all subcarriers within a channel are orthogonal to each other, allowing them to overlap without interference. This allows for more efficient spectrum usage than traditional FDMA. OFDMA was introduced in the 1960s-70s and has since been used in technologies like Wi-Fi, WiMAX, LTE, and is being researched for future 5G networks due to its ability to support high-speed data transmission.
This document provides an overview of equalization and diversity techniques used in mobile communication systems. It discusses how equalization is used to compensate for intersymbol interference caused by multipath fading. Linear equalizers aim to minimize mean square error, while nonlinear equalizers also use decision feedback. Common equalizer structures include transversal filters adapted using algorithms like LMS or RLS. Diversity techniques like spatial or frequency diversity compensate for fading by combining signals from multiple antennas or frequency bands. Channel coding adds redundancy to improve link performance in the presence of errors.
Orthogonal Frequency Division Multiple Access (OFDMA) is a multiple access technique that uses OFDM and FDMA. It divides the available bandwidth into multiple orthogonal subcarriers, assigning subsets of subcarriers to individual users. This allows for efficient use of spectrum and multi-user diversity. OFDMA provides better performance in fading environments compared to CDMA. However, it suffers from high peak-to-average power ratio and requires tight synchronization between users. OFDMA is used in wireless standards like WiMax due to its ability to support high data rates and combat intersymbol interference.
By completing this presentation will be have a clear idea about Antenna's working principles, Antenna's Types & Antenna's Parameters. At the end to this document you'll have a brief idea about Antenna's Tilt vs Distance Calculation & Cluster wise optimum Antenna Selection procedure. Impact of antenna PIM & VSWR have been described elaborately in this document as well.
- The document discusses wireless channel propagation and fading. It covers topics like large-scale fading (path loss and shadowing), small-scale fading (time-selective and frequency-selective fading), and statistical characterization of fading channels.
- Small-scale fading is caused by multipath propagation and results in rapid fluctuations in the strength of the received signal over short periods of time or travel distances. It can be time-selective or frequency-selective depending on delay spread and Doppler spread.
- Common distributions for modeling fading amplitudes are Rayleigh for non-line-of-sight environments and Rician when there is a dominant line-of-sight path. The document presents models for generating both Rayleigh and Rician fading
Wireless communication transfers information between points without a wired connection. A transmitter sends electromagnetic waves through the air medium to a receiver. Radio propagation allows signals to travel from the transmitter in three modes: direct, ground wave, and sky wave. Multipath propagation occurs when signals reach the receiver along multiple paths, which can cause constructive or destructive interference. Fading describes signal attenuation over time due to factors like multipath delay spread, Doppler spread from mobility, rain, obstacles, and frequency. Shadowing also reduces signal strength from blockage by objects along the transmission path.
Ultra-wideband (UWB) antennas must transmit very short pulse signals accurately and efficiently. The document discusses various types of UWB antennas including traveling-wave antennas like horn antennas, frequency-independent antennas whose radiation patterns do not change with frequency, self-complementary antennas with constant input impedance regardless of frequency or shape, multiple resonance antennas made of multiple narrowband elements, and electrically small antennas. Key antenna characterization parameters in time and frequency domains are also presented.
Its a good presentation on Antenna topic because every one is know that in electrical engineering antenna is a complete subject & its too much difficult subject of electrical engineering....I hope this ppt slides helpful in your future...Thanks A lot guys.......
KINDLY REGARDS
KHAWAJA SHAHBAZ IQBAL
ELECTRICAL ENGINEER
UNIVERSITY OF CENTRAL PUNJAB ,LAHORE ,PAKISTAN
+923360690272
- Antennas convert electric currents into radio waves and vice versa. They are used in various technologies including radio, television, mobile phones, WiFi, and radar.
- The first antennas were built in 1888 by Heinrich Hertz to transmit and receive electromagnetic waves. Modern antennas come in different types for applications like broadcasting, communications, and space exploration.
- Antennas work by using an oscillating current to generate oscillating electric and magnetic fields that propagate as radio waves. During reception, the antenna intercepts some power from incoming radio waves to produce a voltage for the receiver.
Radio waves can propagate between two points through four main ways: directly, following the curvature of the Earth, becoming trapped in the atmosphere, or refracting off the ionosphere. Propagation modes include ground-wave, sky-wave, and space-wave propagation. Mobile radio propagation is influenced by factors like reflections, scattering, diffraction, and the electromagnetic properties of materials. Proper propagation modeling is important for wireless system design and performance.
In Frequency-division multiple access (FDMA), the available channel bandwidth is divided into many non overlapping frequency bands, where each band is dynamically assigned to a specific user to transmit data.
Like FDM, OFDM uses multiple subcarriers BUT:
There are closely spaces to each other without causing interference, removing guard bands.
Its possible because subcarriers are orthogonal.
OFDMA allocates multi-user in time domain as well in frequency domain. OFDMA is a very popular Multiplexing method used for many of the latest wireless and telecommunication standards,
An antenna converts radio frequency electric current into electromagnetic waves that are radiated into space. The same antenna can transmit and receive signals. Key antenna concepts include reciprocity, radiation patterns, gain, and polarization. Antenna gain compares its power output to an isotropic antenna. Common antennas include dipole, parabolic reflective, and types are optimized for propagation modes like ground wave, sky wave, and line-of-sight. Signal strength is reduced by factors like free space loss, noise, multipath, and fading over the transmission path.
Introduction To Wireless Fading ChannelsNitin Jain
The document summarizes key concepts related to wireless fading channels, including:
1. Multipath fading causes fluctuations in signal strength over small physical distances due to constructive and destructive interference from multiple signal paths.
2. Rayleigh fading occurs when there is no line-of-sight path between transmitter and receiver, resulting in fast, large fluctuations in signal strength over small physical distances.
3. Doppler spread and coherence time describe how quickly the wireless channel varies over time due to mobility, with fast fading occurring if the channel changes significantly within a symbol period.
Small-scale fading in wireless channels is caused by multipath propagation. There are three main effects: rapid signal strength changes over small distances/times, random Doppler shifts from multipath signals, and time dispersion of echoes. Multipath results from reflection, diffraction and scattering off surroundings. Several methods measure multipath structure including direct RF pulse systems, spread spectrum sliding correlators, and frequency domain channel sounding using vector network analyzers. These techniques help determine power delay profiles and understand time-varying multipath effects.
IJERA (International journal of Engineering Research and Applications) is International online, ... peer reviewed journal. For more detail or submit your article, please visit www.ijera.com
Improved linearization of laser source and erbium dopedIAEME Publication
This document discusses techniques to reduce nonlinear distortion in Radio over Fiber (RoF) systems. It summarizes:
1) Predistortion is used to reduce nonlinearity introduced by the laser source. By introducing a predistortion circuit in front of the laser, its nonlinearity can be reduced.
2) Feedforward technique is employed to reduce nonlinear distortion in erbium doped fiber amplifiers (EDFAs).
3) Both techniques are analyzed individually and their combined effect is investigated to minimize nonlinear distortion in RoF systems.
The peer-reviewed International Journal of Engineering Inventions (IJEI) is started with a mission to encourage contribution to research in Science and Technology. Encourage and motivate researchers in challenging areas of Sciences and Technology.
This document discusses the use of smart antennas in 4G mobile communications. It begins by defining smart antennas as antenna arrays connected to a digital signal processor that can enhance wireless links through diversity gain, array gain, and interference suppression. This allows for higher data rates or more simultaneous users. The document then discusses key principles such as using antenna arrays to distinguish propagation paths and encode independent data streams. It also covers applications like space division multiple access and beamforming basics. Specific benefits of smart antennas for mobile communications discussed include increased antenna gain, decreased inter-symbol interference, and spatial filtering/nulling of interference.
11.smart antennas in 0004www.iiste.org call for paper_gAlexander Decker
This document summarizes a paper on smart antennas in 4G systems. It discusses how smart antennas work using an array of antenna elements and a digital signal processor to form beams. This allows for diversity gain, array gain, and interference suppression, improving capacity. Smart antennas can distinguish between propagation paths to transmit independent data streams or redundantly encode data. They can also suppress interference for conventional transmitters. Applications discussed include space division multiple access, beamforming basics, switched beam antennas, and use in mobile communications for increased gain and reduced interference.
Smart antennas for mobile communicationspriyasindhu
This document provides an introduction to smart antennas for mobile communications. It discusses how smart antennas, which use multiple antenna elements at transceivers, can help address challenges in wireless networks like limited spectrum resources and multipath interference. Smart antennas can provide array gain through signal combining, exploit spatial diversity to combat fading, and help mitigate interference. Early forms of spatial processing included adaptive beamforming and antenna diversity techniques. Selection diversity is described as one simple method of diversity combining.
Ofdm mimo and v-blast algorithm-key to high speed wireless communicationIAEME Publication
This document provides an overview of OFDM-MIMO technology for high-speed wireless communication. It discusses how OFDM divides a high-rate data stream into parallel lower-rate substreams that are transmitted over multiple carriers. MIMO is then used to further improve data rates and quality of service by exploiting multiple antennas at the transmitter and receiver. The document also describes V-BLAST, an algorithm used in MIMO systems to separate simultaneously transmitted signals at the receiver through ordered cancellation.
Ofdm mimo and v-blast algorithm-key to high speed wireless communicationIAEME Publication
This document provides an overview of OFDM-MIMO technology for high-speed wireless communication. It discusses how OFDM divides a high-rate data stream into parallel lower-rate substreams that are transmitted over multiple carriers. MIMO is then used to further improve data rates and quality of service by exploiting multiple antennas at the transmitter and receiver. The document also describes V-BLAST, an algorithm used in MIMO systems to separate simultaneously transmitted signals at the receiver through ordered cancellation.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
Channel Estimation Techniques in MIMO-OFDM LTE SystemsCauses and Effects of C...IJERA Editor
There is an increasing demand for high data transmission rates with the evolution of the very large scale integration (VLSI) technology. The multiple input multiple output-orthogonal frequency division multiplexing (MIMO-OFDM) systems are used to fulfill these requirements because of their unique properties such as high spectral efficiency, high data rate and resistance towards multipath propagation. MIMO-OFDM systems are finding their applications in the modern wireless communication systems like IEEE 802.11n, 4G and LTE. They also offer reliable communication with the increased coverage area. The bottleneck to the MIMO-OFDM systems is the estimation of the channel state information (CSI). This can be estimated with the help of any one of the Training Based, Semiblind and Blind Channel estimation algorithms. This paper presents various channel estimation algorithms, optimization techniques and their effective utilization in MIMO-OFDM for modern wireless LTE systems.
A Review Of Diversity Techniques For Wireless Communiation SystemsCourtney Esco
This document summarizes diversity techniques for wireless communication systems. It discusses both physical diversity techniques like space, time, and frequency diversity as well as virtual diversity techniques like cooperative diversity. Physical diversity techniques combat multipath fading by transmitting the same information over different paths. Spatial diversity uses multiple antennas at the transmitter or receiver. Well-known spatial diversity codes include Alamouti's STBC and generalized complex orthogonal STBCs. Maximum ratio combining is discussed as the optimal receive diversity technique. Virtual diversity techniques like cooperative diversity create a virtual MIMO system by having nodes cooperate to transmit each other's messages. Cooperative diversity can achieve diversity gains similar to MIMO.
IRJET-Propagation Models for Wireless Communication SystemIRJET Journal
This document discusses propagation models in wireless communication systems. It begins by introducing the challenges of wireless communication due to factors like noise, fading and interference that vary unpredictably over time. It then describes several key characteristics of wireless channels that affect signal propagation: path loss, where signal strength decreases with distance; fading caused by multipath interference; shadowing from obstructions; Doppler shift from motion; and co-channel and adjacent channel interference. The document provides models for path loss prediction and discusses indoor and outdoor propagation models for wireless system design and deployment.
IMPLEMENTATION OF LINEAR DETECTION TECHNIQUES TO OVERCOME CHANNEL EFFECTS IN ...IJCI JOURNAL
Spatial diversity technique enables improvement in quality and reliability of wireless link. Antenna
diversity along with understanding effects of channel on transmitted signal and methods to overcome the
channel impairment plays an important role in wireless communication where sharing of channel occurs
between users. In this paper single input single output system (SISO) is compared with multiple input
multiple output system (MIMO) in terms of bit error rate performance. Bit error rate performance is also
evaluated for MIMO with least squares (LS) and Minimum mean square error (MMSE) linear detection.
Further analysis and simulation is done to understand the effect of channel imperfections on BER.
K Coverage Probability of 5G Wireless Cognitive Radio Network under Shadow Fa...ijeei-iaes
Land mobile communication is burdened with typical propagation constraints due to the channel characteristics in radio systems.Also,the propagation characteristics vary form place to place and also as the mobile unit moves,from time to time.Hence,the tramsmission path between transmitter and receiver varies from simple direct LOS to the one which is severely obstructed by buildings,foliage and terrain.Multipath propagation and shadow fading effects affect the signal strength of an arbitrary Transmitter-Receiver due to the rapid fluctuations in the phase and amplitude of signal which also determines the average power over an area of tens or hundreds of meters.Shadowing introduces additional fluctuations,so the received local mean power varies around the area –mean.The present section deals with the performance analysis of fifth generation wireless cognitive radio network on the basis of signal and interference level based k coverage probability under the shadow fading effects.
COMPARISON OF BER AND NUMBER OF ERRORS WITH DIFFERENT MODULATION TECHNIQUES I...Sukhvinder Singh Malik
This paper provides analysis of BER and Number of Errors for MIMO-OFDM wireless communication system by using different modulation techniques. Wireless designers constantly seek to improve the spectrum efficiency/capacity, coverage of wireless networks, and link reliability. So the performances of the wireless communication systems can be enhanced by using multiple transmit and receive antennas, which is generally referred to as the MIMO technique. Here analysis will be carried out for an OFDM wireless communication system using different modulation techniques and considering the effect and the wireless channel like AWGN, fading. Performance results will be evaluated numerically and graphically using the plots of BER versus SNR and plots of number of errors versus SNR.
The document summarizes various diversity techniques used in wireless communication systems to mitigate the effects of fading. It describes that diversity exploits the random nature of radio propagation by finding independent signal paths for communication. The key diversity techniques discussed are spatial (antenna) diversity, macroscopic diversity, polarization diversity, frequency diversity, and time diversity. Spatial diversity uses multiple antennas to select the strongest signal and is further classified into techniques like selection diversity and maximal ratio combining. The document compares the different diversity methods and concludes that diversity improves reliability in fading environments by using multiple communication channels.
Techniques for Improving BER and SNR in MIMO Antenna for Optimum PerformanceIJMTST Journal
The use of multiple antennas for diversity, including MIMO (Multiple Input Multiple Output) is one of the most promising wireless technologies for broadband communication applications. This antenna system is a vital study in today’s wireless communication system especially when the signal propagates through some corrupted environments. In our paper new techniques of improving bit error ratio and signal to noise ratio are discussed. Inter symbol interference is a major limitation of wireless communications. It degrades the performance significantly if the delay spread is comparable or higher than the symbol duration. To remove ISI, equalization needs to be included at the receiver end. This paper discusses the merits of the MIMO system and the techniques used for improving BER performance and SNR. In MIMO wireless communication, an equalizer is used to recover a signal that suffers from Inter symbol Interference (ISI) and the BER characteristics is improved and a good SNR can be obtained. Different equalization techniques are discussed in this paper.
This document summarizes recent advances in wireless communication through the implementation of OFDM-MIMO systems. It discusses how OFDM can transmit multiple signals simultaneously using orthogonal subcarriers to improve data rates. MIMO uses multiple antennas at the transmitter and receiver to provide diversity gain and increase capacity. The combination of OFDM and MIMO (OFDM-MIMO) results in increased data rates and efficiency by overcoming problems like frequency selective fading. It then describes how OFDM-MIMO systems can transmit a single signal using transmit diversity and relay selection with decode-and-forward or amplify-and-forward protocols to further improve performance. Simulations show the OFDM-MIMO system achieves a lower bit error rate than
Development And Implementation Of OFDM Transceiver For WLAN ApplicationsIJERA Editor
Multi-Carrier modulation is a technique for data transmission by multiplexing a low bit-rate data streams to modulated carriers into signal Wideband Carrier. Multi-Carrier transmission has a lot of useful properties such as delay-spread tolerance and spectrum efficiency that encourage their use in untethered broadband communication. OFDM is becoming the chosen modulation technique for wireless communications. OFDM is a multi-carrier modulation scheme with densely spaced sub-carriers that has gained a lot of popularity among the broadband community in the last few years. OFDM can provide large data rate with sufficient robustness to radio channel impairments. OFDM works on the principle of Orthogonality. The orthogonality between subcarriers which is at the core of OFDM modulation requires a perfect synchronization. OFDM has properties like high spectral efficiency, Resiliency to RF interference and Lower multi-path distortion. This work is concentrated in implementing both transmitter and receiver using Matlab software and also to verify whether the transmitted data is obtained at the receiver side. As we are using the OFDM technique we will be having bandwidth efficiency when compared to the normal FDM technique.
Implementation of Particle Swarm Optimization Technique for Enhanced Outdoor ...Onyebuchi nosiri
This paper describes the development of optimized model for urban outdoor coverage in Long Term Evolution (LTE) network at 2300 MHz frequency band in Port Harcourt urban region, Nigeria. Signal attenuation and fluctuation remain amongst the major channel impairments for mobile radio communication systems. This arises as a result of model incompatibility with terrain and Line of Sight (LOS) obstruction of the channel signals. Some path loss models such as OkumuraHata, COST 231, Ericsson 999, Egli and ECC-33 models were evaluated for suitability and compared with the modified model for the environments. The models were based on data collected from LTE base stations at three geographical locations in Port Harcourt namely- Rumuokoro, Eneka and Ikwerre roads respectively. The simulation was implemented using MATLAB R2014a software. The modified model was further optimized with some selected parameters such as Root Mean Square Error (RMSE) and Mean Absolute Error (MAE) using Particle Swarm Optimization (PSO) technique. The results obtained gave rise to 3.030dB for RMSE and 0.00162dB for MAE respectively. The results obtained from the PSO optimized model demonstrated a better performance which is suitable for cell coverage planning and smooth handoff processes.
Similar to Diversity techniques for wireless communication (20)
Submission Deadline: 30th September 2022
Acceptance Notification: Within Three Days’ time period
Online Publication: Within 24 Hrs. time Period
Expected Date of Dispatch of Printed Journal: 5th October 2022
MODELING AND ANALYSIS OF SURFACE ROUGHNESS AND WHITE LATER THICKNESS IN WIRE-...IAEME Publication
White layer thickness (WLT) formed and surface roughness in wire electric discharge turning (WEDT) of tungsten carbide composite has been made to model through response surface methodology (RSM). A Taguchi’s standard Design of experiments involving five input variables with three levels has been employed to establish a mathematical model between input parameters and responses. Percentage of cobalt content, spindle speed, Pulse on-time, wire feed and pulse off-time were changed during the experimental tests based on the Taguchi’s orthogonal array L27 (3^13). Analysis of variance (ANOVA) revealed that the mathematical models obtained can adequately describe performance within the parameters of the factors considered. There was a good agreement between the experimental and predicted values in this study.
A STUDY ON THE REASONS FOR TRANSGENDER TO BECOME ENTREPRENEURSIAEME Publication
The study explores the reasons for a transgender to become entrepreneurs. In this study transgender entrepreneur was taken as independent variable and reasons to become as dependent variable. Data were collected through a structured questionnaire containing a five point Likert Scale. The study examined the data of 30 transgender entrepreneurs in Salem Municipal Corporation of Tamil Nadu State, India. Simple Random sampling technique was used. Garrett Ranking Technique (Percentile Position, Mean Scores) was used as the analysis for the present study to identify the top 13 stimulus factors for establishment of trans entrepreneurial venture. Economic advancement of a nation is governed upon the upshot of a resolute entrepreneurial doings. The conception of entrepreneurship has stretched and materialized to the socially deflated uncharted sections of transgender community. Presently transgenders have smashed their stereotypes and are making recent headlines of achievements in various fields of our Indian society. The trans-community is gradually being observed in a new light and has been trying to achieve prospective growth in entrepreneurship. The findings of the research revealed that the optimistic changes are taking place to change affirmative societal outlook of the transgender for entrepreneurial ventureship. It also laid emphasis on other transgenders to renovate their traditional living. The paper also highlights that legislators, supervisory body should endorse an impartial canons and reforms in Tamil Nadu Transgender Welfare Board Association.
BROAD UNEXPOSED SKILLS OF TRANSGENDER ENTREPRENEURSIAEME Publication
Since ages gender difference is always a debatable theme whether caused by nature, evolution or environment. The birth of a transgender is dreadful not only for the child but also for their parents. The pain of living in the wrong physique and treated as second class victimized citizen is outrageous and fully harboured with vicious baseless negative scruples. For so long, social exclusion had perpetuated inequality and deprivation experiencing ingrained malign stigma and besieged victims of crime or violence across their life spans. They are pushed into the murky way of life with a source of eternal disgust, bereft sexual potency and perennial fear. Although they are highly visible but very little is known about them. The common public needs to comprehend the ravaged arrogance on these insensitive souls and assist in integrating them into the mainstream by offering equal opportunity, treat with humanity and respect their dignity. Entrepreneurship in the current age is endorsing the gender fairness movement. Unstable careers and economic inadequacy had inclined one of the gender variant people called Transgender to become entrepreneurs. These tiny budding entrepreneurs resulted in economic transition by means of employment, free from the clutches of stereotype jobs, raised standard of living and handful of financial empowerment. Besides all these inhibitions, they were able to witness a platform for skill set development that ignited them to enter into entrepreneurial domain. This paper epitomizes skill sets involved in trans-entrepreneurs of Thoothukudi Municipal Corporation of Tamil Nadu State and is a groundbreaking determination to sightsee various skills incorporated and the impact on entrepreneurship.
DETERMINANTS AFFECTING THE USER'S INTENTION TO USE MOBILE BANKING APPLICATIONSIAEME Publication
The banking and financial services industries are experiencing increased technology penetration. Among them, the banking industry has made technological advancements to better serve the general populace. The economy focused on transforming the banking sector's system into a cashless, paperless, and faceless one. The researcher wants to evaluate the user's intention for utilising a mobile banking application. The study also examines the variables affecting the user's behaviour intention when selecting specific applications for financial transactions. The researcher employed a well-structured questionnaire and a descriptive study methodology to gather the respondents' primary data utilising the snowball sampling technique. The study includes variables like performance expectations, effort expectations, social impact, enabling circumstances, and perceived risk. Each of the aforementioned variables has a major impact on how users utilise mobile banking applications. The outcome will assist the service provider in comprehending the user's history with mobile banking applications.
ANALYSE THE USER PREDILECTION ON GPAY AND PHONEPE FOR DIGITAL TRANSACTIONSIAEME Publication
Technology upgradation in banking sector took the economy to view that payment mode towards online transactions using mobile applications. This system enabled connectivity between banks, Merchant and user in a convenient mode. there are various applications used for online transactions such as Google pay, Paytm, freecharge, mobikiwi, oxygen, phonepe and so on and it also includes mobile banking applications. The study aimed at evaluating the predilection of the user in adopting digital transaction. The study is descriptive in nature. The researcher used random sample techniques to collect the data. The findings reveal that mobile applications differ with the quality of service rendered by Gpay and Phonepe. The researcher suggest the Phonepe application should focus on implementing the application should be user friendly interface and Gpay on motivating the users to feel the importance of request for money and modes of payments in the application.
VOICE BASED ATM FOR VISUALLY IMPAIRED USING ARDUINOIAEME Publication
The prototype of a voice-based ATM for visually impaired using Arduino is to help people who are blind. This uses RFID cards which contain users fingerprint encrypted on it and interacts with the users through voice commands. ATM operates when sensor detects the presence of one person in the cabin. After scanning the RFID card, it will ask to select the mode like –normal or blind. User can select the respective mode through voice input, if blind mode is selected the balance check or cash withdraw can be done through voice input. Normal mode procedure is same as the existing ATM.
IMPACT OF EMOTIONAL INTELLIGENCE ON HUMAN RESOURCE MANAGEMENT PRACTICES AMONG...IAEME Publication
There is increasing acceptability of emotional intelligence as a major factor in personality assessment and effective human resource management. Emotional intelligence as the ability to build capacity, empathize, co-operate, motivate and develop others cannot be divorced from both effective performance and human resource management systems. The human person is crucial in defining organizational leadership and fortunes in terms of challenges and opportunities and walking across both multinational and bilateral relationships. The growing complexity of the business world requires a great deal of self-confidence, integrity, communication, conflict and diversity management to keep the global enterprise within the paths of productivity and sustainability. Using the exploratory research design and 255 participants the result of this original study indicates strong positive correlation between emotional intelligence and effective human resource management. The paper offers suggestions on further studies between emotional intelligence and human capital development and recommends for conflict management as an integral part of effective human resource management.
VISUALISING AGING PARENTS & THEIR CLOSE CARERS LIFE JOURNEY IN AGING ECONOMYIAEME Publication
Our life journey, in general, is closely defined by the way we understand the meaning of why we coexist and deal with its challenges. As we develop the "inspiration economy", we could say that nearly all of the challenges we have faced are opportunities that help us to discover the rest of our journey. In this note paper, we explore how being faced with the opportunity of being a close carer for an aging parent with dementia brought intangible discoveries that changed our insight of the meaning of the rest of our life journey.
A STUDY ON THE IMPACT OF ORGANIZATIONAL CULTURE ON THE EFFECTIVENESS OF PERFO...IAEME Publication
The main objective of this study is to analyze the impact of aspects of Organizational Culture on the Effectiveness of the Performance Management System (PMS) in the Health Care Organization at Thanjavur. Organizational Culture and PMS play a crucial role in present-day organizations in achieving their objectives. PMS needs employees’ cooperation to achieve its intended objectives. Employees' cooperation depends upon the organization’s culture. The present study uses exploratory research to examine the relationship between the Organization's culture and the Effectiveness of the Performance Management System. The study uses a Structured Questionnaire to collect the primary data. For this study, Thirty-six non-clinical employees were selected from twelve randomly selected Health Care organizations at Thanjavur. Thirty-two fully completed questionnaires were received.
Living in 21st century in itself reminds all of us the necessity of police and its administration. As more and more we are entering into the modern society and culture, the more we require the services of the so called ‘Khaki Worthy’ men i.e., the police personnel. Whether we talk of Indian police or the other nation’s police, they all have the same recognition as they have in India. But as already mentioned, their services and requirements are different after the like 26th November, 2008 incidents, where they without saving their own lives has sacrificed themselves without any hitch and without caring about their respective family members and wards. In other words, they are like our heroes and mentors who can guide us from the darkness of fear, militancy, corruption and other dark sides of life and so on. Now the question arises, if Gandhi would have been alive today, what would have been his reaction/opinion to the police and its functioning? Would he have some thing different in his mind now what he had been in his mind before the partition or would he be going to start some Satyagraha in the form of some improvement in the functioning of the police administration? Really these questions or rather night mares can come to any one’s mind, when there is too much confusion is prevailing in our minds, when there is too much corruption in the society and when the polices working is also in the questioning because of one or the other case throughout the India. It is matter of great concern that we have to thing over our administration and our practical approach because the police personals are also like us, they are part and parcel of our society and among one of us, so why we all are pin pointing towards them.
A STUDY ON TALENT MANAGEMENT AND ITS IMPACT ON EMPLOYEE RETENTION IN SELECTED...IAEME Publication
The goal of this study was to see how talent management affected employee retention in the selected IT organizations in Chennai. The fundamental issue was the difficulty to attract, hire, and retain talented personnel who perform well and the gap between supply and demand of talent acquisition and retaining them within the firms. The study's main goals were to determine the impact of talent management on employee retention in IT companies in Chennai, investigate talent management strategies that IT companies could use to improve talent acquisition, performance management, career planning and formulate retention strategies that the IT firms could use. The respondents were given a structured close-ended questionnaire with the 5 Point Likert Scale as part of the study's quantitative research design. The target population consisted of 289 IT professionals. The questionnaires were distributed and collected by the researcher directly. The Statistical Package for Social Sciences (SPSS) was used to collect and analyse the questionnaire responses. Hypotheses that were formulated for the various areas of the study were tested using a variety of statistical tests. The key findings of the study suggested that talent management had an impact on employee retention. The studies also found that there is a clear link between the implementation of talent management and retention measures. Management should provide enough training and development for employees, clarify job responsibilities, provide adequate remuneration packages, and recognise employees for exceptional performance.
ATTRITION IN THE IT INDUSTRY DURING COVID-19 PANDEMIC: LINKING EMOTIONAL INTE...IAEME Publication
Globally, Millions of dollars were spent by the organizations for employing skilled Information Technology (IT) professionals. It is costly to replace unskilled employees with IT professionals possessing technical skills and competencies that aid in interconnecting the business processes. The organization’s employment tactics were forced to alter by globalization along with technological innovations as they consistently diminish to remain lean, outsource to concentrate on core competencies along with restructuring/reallocate personnel to gather efficiency. As other jobs, organizations or professions have become reasonably more appropriate in a shifting employment landscape, the above alterations trigger both involuntary as well as voluntary turnover. The employee view on jobs is also afflicted by the COVID-19 pandemic along with the employee-driven labour market. So, having effective strategies is necessary to tackle the withdrawal rate of employees. By associating Emotional Intelligence (EI) along with Talent Management (TM) in the IT industry, the rise in attrition rate was analyzed in this study. Only 303 respondents were collected out of 350 participants to whom questionnaires were distributed. From the employees of IT organizations located in Bangalore (India), the data were congregated. A simple random sampling methodology was employed to congregate data as of the respondents. Generating the hypothesis along with testing is eventuated. The effect of EI and TM along with regression analysis between TM and EI was analyzed. The outcomes indicated that employee and Organizational Performance (OP) were elevated by effective EI along with TM.
INFLUENCE OF TALENT MANAGEMENT PRACTICES ON ORGANIZATIONAL PERFORMANCE A STUD...IAEME Publication
By implementing talent management strategy, organizations would have the option to retain their skilled professionals while additionally working on their overall performance. It is the course of appropriately utilizing the ideal individuals, setting them up for future top positions, exploring and dealing with their performance, and holding them back from leaving the organization. It is employee performance that determines the success of every organization. The firm quickly obtains an upper hand over its rivals in the event that its employees having particular skills that cannot be duplicated by the competitors. Thus, firms are centred on creating successful talent management practices and processes to deal with the unique human resources. Firms are additionally endeavouring to keep their top/key staff since on the off chance that they leave; the whole store of information leaves the firm's hands. The study's objective was to determine the impact of talent management on organizational performance among the selected IT organizations in Chennai. The study recommends that talent management limitedly affects performance. On the off chance that this talent is appropriately management and implemented properly, organizations might benefit as much as possible from their maintained assets to support development and productivity, both monetarily and non-monetarily.
A STUDY OF VARIOUS TYPES OF LOANS OF SELECTED PUBLIC AND PRIVATE SECTOR BANKS...IAEME Publication
Banking regulations act of India, 1949 defines banking as “acceptance of deposits for the purpose of lending or investment from the public, repayment on demand or otherwise and withdrawable through cheques, drafts order or otherwise”, the major participants of the Indian financial system are commercial banks, the financial institution encompassing term lending institutions. Investments institutions, specialized financial institution and the state level development banks, non banking financial companies (NBFC) and other market intermediaries such has the stock brokers and money lenders are among the oldest of the certain variants of NBFC and the oldest market participants. The asset quality of banks is one of the most important indicators of their financial health. The Indian banking sector has been facing severe problems of increasing Non- Performing Assets (NPAs). The NPAs growth directly and indirectly affects the quality of assets and profitability of banks. It also shows the efficiency of banks credit risk management and the recovery effectiveness. NPA do not generate any income, whereas, the bank is required to make provisions for such as assets that why is a double edge weapon. This paper outlines the concept of quality of bank loans of different types like Housing, Agriculture and MSME loans in state Haryana of selected public and private sector banks. This study is highlighting problems associated with the role of commercial bank in financing Small and Medium Scale Enterprises (SME). The overall objective of the research was to assess the effect of the financing provisions existing for the setting up and operations of MSMEs in the country and to generate recommendations for more robust financing mechanisms for successful operation of the MSMEs, in turn understanding the impact of MSME loans on financial institutions due to NPA. There are many research conducted on the topic of Non- Performing Assets (NPA) Management, concerning particular bank, comparative study of public and private banks etc. In this paper the researcher is considering the aggregate data of selected public sector and private sector banks and attempts to compare the NPA of Housing, Agriculture and MSME loans in state Haryana of public and private sector banks. The tools used in the study are average and Anova test and variance. The findings reveal that NPA is common problem for both public and private sector banks and is associated with all types of loans either that is housing loans, agriculture loans and loans to SMES. NPAs of both public and private sector banks show the increasing trend. In 2010-11 GNPA of public and private sector were at same level it was 2% but after 2010-11 it increased in many fold and at present there is GNPA in some more than 15%. It shows the dark area of Indian banking sector.
EXPERIMENTAL STUDY OF MECHANICAL AND TRIBOLOGICAL RELATION OF NYLON/BaSO4 POL...IAEME Publication
An experiment conducted in this study found that BaSO4 changed Nylon 6's mechanical properties. By changing the weight ratios, BaSO4 was used to make Nylon 6. This Researcher looked into how hard Nylon-6/BaSO4 composites are and how well they wear. Experiments were done based on Taguchi design L9. Nylon-6/BaSO4 composites can be tested for their hardness number using a Rockwell hardness testing apparatus. On Nylon/BaSO4, the wear behavior was measured by a wear monitor, pinon-disc friction by varying reinforcement, sliding speed, and sliding distance, and the microstructure of the crack surfaces was observed by SEM. This study provides significant contributions to ultimate strength by increasing BaSO4 content up to 16% in the composites, and sliding speed contributes 72.45% to the wear rate
ROLE OF SOCIAL ENTREPRENEURSHIP IN RURAL DEVELOPMENT OF INDIA - PROBLEMS AND ...IAEME Publication
The majority of the population in India lives in villages. The village is the back bone of the country. Village or rural industries play an important role in the national economy, particularly in the rural development. Developing the rural economy is one of the key indicators towards a country’s success. Whether it be the need to look after the welfare of the farmers or invest in rural infrastructure, Governments have to ensure that rural development isn’t compromised. The economic development of our country largely depends on the progress of rural areas and the standard of living of rural masses. Village or rural industries play an important role in the national economy, particularly in the rural development. Rural entrepreneurship is based on stimulating local entrepreneurial talent and the subsequent growth of indigenous enterprises. It recognizes opportunity in the rural areas and accelerates a unique blend of resources either inside or outside of agriculture. Rural entrepreneurship brings an economic value to the rural sector by creating new methods of production, new markets, new products and generate employment opportunities thereby ensuring continuous rural development. Social Entrepreneurship has the direct and primary objective of serving the society along with the earning profits. So, social entrepreneurship is different from the economic entrepreneurship as its basic objective is not to earn profits but for providing innovative solutions to meet the society needs which are not taken care by majority of the entrepreneurs as they are in the business for profit making as a sole objective. So, the Social Entrepreneurs have the huge growth potential particularly in the developing countries like India where we have huge societal disparities in terms of the financial positions of the population. Still 22 percent of the Indian population is below the poverty line and also there is disparity among the rural & urban population in terms of families living under BPL. 25.7 percent of the rural population & 13.7 percent of the urban population is under BPL which clearly shows the disparity of the poor people in the rural and urban areas. The need to develop social entrepreneurship in agriculture is dictated by a large number of social problems. Such problems include low living standards, unemployment, and social tension. The reasons that led to the emergence of the practice of social entrepreneurship are the above factors. The research problem lays upon disclosing the importance of role of social entrepreneurship in rural development of India. The paper the tendencies of social entrepreneurship in India, to present successful examples of such business for providing recommendations how to improve situation in rural areas in terms of social entrepreneurship development. Indian government has made some steps towards development of social enterprises, social entrepreneurship, and social in- novation, but a lot remains to be improved.
OPTIMAL RECONFIGURATION OF POWER DISTRIBUTION RADIAL NETWORK USING HYBRID MET...IAEME Publication
Distribution system is a critical link between the electric power distributor and the consumers. Most of the distribution networks commonly used by the electric utility is the radial distribution network. However in this type of network, it has technical issues such as enormous power losses which affect the quality of the supply. Nowadays, the introduction of Distributed Generation (DG) units in the system help improve and support the voltage profile of the network as well as the performance of the system components through power loss mitigation. In this study network reconfiguration was done using two meta-heuristic algorithms Particle Swarm Optimization and Gravitational Search Algorithm (PSO-GSA) to enhance power quality and voltage profile in the system when simultaneously applied with the DG units. Backward/Forward Sweep Method was used in the load flow analysis and simulated using the MATLAB program. Five cases were considered in the Reconfiguration based on the contribution of DG units. The proposed method was tested using IEEE 33 bus system. Based on the results, there was a voltage profile improvement in the system from 0.9038 p.u. to 0.9594 p.u.. The integration of DG in the network also reduced power losses from 210.98 kW to 69.3963 kW. Simulated results are drawn to show the performance of each case.
APPLICATION OF FRUGAL APPROACH FOR PRODUCTIVITY IMPROVEMENT - A CASE STUDY OF...IAEME Publication
Manufacturing industries have witnessed an outburst in productivity. For productivity improvement manufacturing industries are taking various initiatives by using lean tools and techniques. However, in different manufacturing industries, frugal approach is applied in product design and services as a tool for improvement. Frugal approach contributed to prove less is more and seems indirectly contributing to improve productivity. Hence, there is need to understand status of frugal approach application in manufacturing industries. All manufacturing industries are trying hard and putting continuous efforts for competitive existence. For productivity improvements, manufacturing industries are coming up with different effective and efficient solutions in manufacturing processes and operations. To overcome current challenges, manufacturing industries have started using frugal approach in product design and services. For this study, methodology adopted with both primary and secondary sources of data. For primary source interview and observation technique is used and for secondary source review has done based on available literatures in website, printed magazines, manual etc. An attempt has made for understanding application of frugal approach with the study of manufacturing industry project. Manufacturing industry selected for this project study is Mahindra and Mahindra Ltd. This paper will help researcher to find the connections between the two concepts productivity improvement and frugal approach. This paper will help to understand significance of frugal approach for productivity improvement in manufacturing industry. This will also help to understand current scenario of frugal approach in manufacturing industry. In manufacturing industries various process are involved to deliver the final product. In the process of converting input in to output through manufacturing process productivity plays very critical role. Hence this study will help to evolve status of frugal approach in productivity improvement programme. The notion of frugal can be viewed as an approach towards productivity improvement in manufacturing industries.
A MULTIPLE – CHANNEL QUEUING MODELS ON FUZZY ENVIRONMENTIAEME Publication
In this paper, we investigated a queuing model of fuzzy environment-based a multiple channel queuing model (M/M/C) ( /FCFS) and study its performance under realistic conditions. It applies a nonagonal fuzzy number to analyse the relevant performance of a multiple channel queuing model (M/M/C) ( /FCFS). Based on the sub interval average ranking method for nonagonal fuzzy number, we convert fuzzy number to crisp one. Numerical results reveal that the efficiency of this method. Intuitively, the fuzzy environment adapts well to a multiple channel queuing models (M/M/C) ( /FCFS) are very well.
Discover top-tier mobile app development services, offering innovative solutions for iOS and Android. Enhance your business with custom, user-friendly mobile applications.
Digital Banking in the Cloud: How Citizens Bank Unlocked Their MainframePrecisely
Inconsistent user experience and siloed data, high costs, and changing customer expectations – Citizens Bank was experiencing these challenges while it was attempting to deliver a superior digital banking experience for its clients. Its core banking applications run on the mainframe and Citizens was using legacy utilities to get the critical mainframe data to feed customer-facing channels, like call centers, web, and mobile. Ultimately, this led to higher operating costs (MIPS), delayed response times, and longer time to market.
Ever-changing customer expectations demand more modern digital experiences, and the bank needed to find a solution that could provide real-time data to its customer channels with low latency and operating costs. Join this session to learn how Citizens is leveraging Precisely to replicate mainframe data to its customer channels and deliver on their “modern digital bank” experiences.
zkStudyClub - LatticeFold: A Lattice-based Folding Scheme and its Application...Alex Pruden
Folding is a recent technique for building efficient recursive SNARKs. Several elegant folding protocols have been proposed, such as Nova, Supernova, Hypernova, Protostar, and others. However, all of them rely on an additively homomorphic commitment scheme based on discrete log, and are therefore not post-quantum secure. In this work we present LatticeFold, the first lattice-based folding protocol based on the Module SIS problem. This folding protocol naturally leads to an efficient recursive lattice-based SNARK and an efficient PCD scheme. LatticeFold supports folding low-degree relations, such as R1CS, as well as high-degree relations, such as CCS. The key challenge is to construct a secure folding protocol that works with the Ajtai commitment scheme. The difficulty, is ensuring that extracted witnesses are low norm through many rounds of folding. We present a novel technique using the sumcheck protocol to ensure that extracted witnesses are always low norm no matter how many rounds of folding are used. Our evaluation of the final proof system suggests that it is as performant as Hypernova, while providing post-quantum security.
Paper Link: https://eprint.iacr.org/2024/257
Monitoring and Managing Anomaly Detection on OpenShift.pdfTosin Akinosho
Monitoring and Managing Anomaly Detection on OpenShift
Overview
Dive into the world of anomaly detection on edge devices with our comprehensive hands-on tutorial. This SlideShare presentation will guide you through the entire process, from data collection and model training to edge deployment and real-time monitoring. Perfect for those looking to implement robust anomaly detection systems on resource-constrained IoT/edge devices.
Key Topics Covered
1. Introduction to Anomaly Detection
- Understand the fundamentals of anomaly detection and its importance in identifying unusual behavior or failures in systems.
2. Understanding Edge (IoT)
- Learn about edge computing and IoT, and how they enable real-time data processing and decision-making at the source.
3. What is ArgoCD?
- Discover ArgoCD, a declarative, GitOps continuous delivery tool for Kubernetes, and its role in deploying applications on edge devices.
4. Deployment Using ArgoCD for Edge Devices
- Step-by-step guide on deploying anomaly detection models on edge devices using ArgoCD.
5. Introduction to Apache Kafka and S3
- Explore Apache Kafka for real-time data streaming and Amazon S3 for scalable storage solutions.
6. Viewing Kafka Messages in the Data Lake
- Learn how to view and analyze Kafka messages stored in a data lake for better insights.
7. What is Prometheus?
- Get to know Prometheus, an open-source monitoring and alerting toolkit, and its application in monitoring edge devices.
8. Monitoring Application Metrics with Prometheus
- Detailed instructions on setting up Prometheus to monitor the performance and health of your anomaly detection system.
9. What is Camel K?
- Introduction to Camel K, a lightweight integration framework built on Apache Camel, designed for Kubernetes.
10. Configuring Camel K Integrations for Data Pipelines
- Learn how to configure Camel K for seamless data pipeline integrations in your anomaly detection workflow.
11. What is a Jupyter Notebook?
- Overview of Jupyter Notebooks, an open-source web application for creating and sharing documents with live code, equations, visualizations, and narrative text.
12. Jupyter Notebooks with Code Examples
- Hands-on examples and code snippets in Jupyter Notebooks to help you implement and test anomaly detection models.
Programming Foundation Models with DSPy - Meetup SlidesZilliz
Prompting language models is hard, while programming language models is easy. In this talk, I will discuss the state-of-the-art framework DSPy for programming foundation models with its powerful optimizers and runtime constraint system.
Generating privacy-protected synthetic data using Secludy and MilvusZilliz
During this demo, the founders of Secludy will demonstrate how their system utilizes Milvus to store and manipulate embeddings for generating privacy-protected synthetic data. Their approach not only maintains the confidentiality of the original data but also enhances the utility and scalability of LLMs under privacy constraints. Attendees, including machine learning engineers, data scientists, and data managers, will witness first-hand how Secludy's integration with Milvus empowers organizations to harness the power of LLMs securely and efficiently.
Driving Business Innovation: Latest Generative AI Advancements & Success StorySafe Software
Are you ready to revolutionize how you handle data? Join us for a webinar where we’ll bring you up to speed with the latest advancements in Generative AI technology and discover how leveraging FME with tools from giants like Google Gemini, Amazon, and Microsoft OpenAI can supercharge your workflow efficiency.
During the hour, we’ll take you through:
Guest Speaker Segment with Hannah Barrington: Dive into the world of dynamic real estate marketing with Hannah, the Marketing Manager at Workspace Group. Hear firsthand how their team generates engaging descriptions for thousands of office units by integrating diverse data sources—from PDF floorplans to web pages—using FME transformers, like OpenAIVisionConnector and AnthropicVisionConnector. This use case will show you how GenAI can streamline content creation for marketing across the board.
Ollama Use Case: Learn how Scenario Specialist Dmitri Bagh has utilized Ollama within FME to input data, create custom models, and enhance security protocols. This segment will include demos to illustrate the full capabilities of FME in AI-driven processes.
Custom AI Models: Discover how to leverage FME to build personalized AI models using your data. Whether it’s populating a model with local data for added security or integrating public AI tools, find out how FME facilitates a versatile and secure approach to AI.
We’ll wrap up with a live Q&A session where you can engage with our experts on your specific use cases, and learn more about optimizing your data workflows with AI.
This webinar is ideal for professionals seeking to harness the power of AI within their data management systems while ensuring high levels of customization and security. Whether you're a novice or an expert, gain actionable insights and strategies to elevate your data processes. Join us to see how FME and AI can revolutionize how you work with data!
For the full video of this presentation, please visit: https://www.edge-ai-vision.com/2024/06/how-axelera-ai-uses-digital-compute-in-memory-to-deliver-fast-and-energy-efficient-computer-vision-a-presentation-from-axelera-ai/
Bram Verhoef, Head of Machine Learning at Axelera AI, presents the “How Axelera AI Uses Digital Compute-in-memory to Deliver Fast and Energy-efficient Computer Vision” tutorial at the May 2024 Embedded Vision Summit.
As artificial intelligence inference transitions from cloud environments to edge locations, computer vision applications achieve heightened responsiveness, reliability and privacy. This migration, however, introduces the challenge of operating within the stringent confines of resource constraints typical at the edge, including small form factors, low energy budgets and diminished memory and computational capacities. Axelera AI addresses these challenges through an innovative approach of performing digital computations within memory itself. This technique facilitates the realization of high-performance, energy-efficient and cost-effective computer vision capabilities at the thin and thick edge, extending the frontier of what is achievable with current technologies.
In this presentation, Verhoef unveils his company’s pioneering chip technology and demonstrates its capacity to deliver exceptional frames-per-second performance across a range of standard computer vision networks typical of applications in security, surveillance and the industrial sector. This shows that advanced computer vision can be accessible and efficient, even at the very edge of our technological ecosystem.
Essentials of Automations: Exploring Attributes & Automation ParametersSafe Software
Building automations in FME Flow can save time, money, and help businesses scale by eliminating data silos and providing data to stakeholders in real-time. One essential component to orchestrating complex automations is the use of attributes & automation parameters (both formerly known as “keys”). In fact, it’s unlikely you’ll ever build an Automation without using these components, but what exactly are they?
Attributes & automation parameters enable the automation author to pass data values from one automation component to the next. During this webinar, our FME Flow Specialists will cover leveraging the three types of these output attributes & parameters in FME Flow: Event, Custom, and Automation. As a bonus, they’ll also be making use of the Split-Merge Block functionality.
You’ll leave this webinar with a better understanding of how to maximize the potential of automations by making use of attributes & automation parameters, with the ultimate goal of setting your enterprise integration workflows up on autopilot.
How to Interpret Trends in the Kalyan Rajdhani Mix Chart.pdfChart Kalyan
A Mix Chart displays historical data of numbers in a graphical or tabular form. The Kalyan Rajdhani Mix Chart specifically shows the results of a sequence of numbers over different periods.
Ivanti’s Patch Tuesday breakdown goes beyond patching your applications and brings you the intelligence and guidance needed to prioritize where to focus your attention first. Catch early analysis on our Ivanti blog, then join industry expert Chris Goettl for the Patch Tuesday Webinar Event. There we’ll do a deep dive into each of the bulletins and give guidance on the risks associated with the newly-identified vulnerabilities.
HCL Notes and Domino License Cost Reduction in the World of DLAUpanagenda
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-and-domino-license-cost-reduction-in-the-world-of-dlau/
The introduction of DLAU and the CCB & CCX licensing model caused quite a stir in the HCL community. As a Notes and Domino customer, you may have faced challenges with unexpected user counts and license costs. You probably have questions on how this new licensing approach works and how to benefit from it. Most importantly, you likely have budget constraints and want to save money where possible. Don’t worry, we can help with all of this!
We’ll show you how to fix common misconfigurations that cause higher-than-expected user counts, and how to identify accounts which you can deactivate to save money. There are also frequent patterns that can cause unnecessary cost, like using a person document instead of a mail-in for shared mailboxes. We’ll provide examples and solutions for those as well. And naturally we’ll explain the new licensing model.
Join HCL Ambassador Marc Thomas in this webinar with a special guest appearance from Franz Walder. It will give you the tools and know-how to stay on top of what is going on with Domino licensing. You will be able lower your cost through an optimized configuration and keep it low going forward.
These topics will be covered
- Reducing license cost by finding and fixing misconfigurations and superfluous accounts
- How do CCB and CCX licenses really work?
- Understanding the DLAU tool and how to best utilize it
- Tips for common problem areas, like team mailboxes, functional/test users, etc
- Practical examples and best practices to implement right away
Connector Corner: Seamlessly power UiPath Apps, GenAI with prebuilt connectorsDianaGray10
Join us to learn how UiPath Apps can directly and easily interact with prebuilt connectors via Integration Service--including Salesforce, ServiceNow, Open GenAI, and more.
The best part is you can achieve this without building a custom workflow! Say goodbye to the hassle of using separate automations to call APIs. By seamlessly integrating within App Studio, you can now easily streamline your workflow, while gaining direct access to our Connector Catalog of popular applications.
We’ll discuss and demo the benefits of UiPath Apps and connectors including:
Creating a compelling user experience for any software, without the limitations of APIs.
Accelerating the app creation process, saving time and effort
Enjoying high-performance CRUD (create, read, update, delete) operations, for
seamless data management.
Speakers:
Russell Alfeche, Technology Leader, RPA at qBotic and UiPath MVP
Charlie Greenberg, host