The document describes feed-through adapters that connect M12 X-coded cabling to RJ45 cabling. The adapters allow for high-performance 10 Gigabit Ethernet connections in industrial equipment. They provide an IP67 connection from an M12 cable to an IP20 RJ45 connection, such as inside an electrical cabinet. The adapters come in linear and angled versions and support transmission speeds up to 10 Gigabit according to category 6A standards.
This document provides examples of Westermo's oil and gas project applications. It summarizes several projects involving using Westermo networking products for monitoring and data collection from chemical plants, subsea trees, gas distribution meters, wellheads, pipelines, and marine systems. Westermo products like DDWs, RFIs, Lynxes, and ODWs were chosen for their ruggedness, wide temperature tolerance, low power consumption, and ability to operate in harsh industrial environments. The projects spanned locations in Europe, Asia, Africa, and the Middle East.
This document summarizes the specifications of a compact, lightweight embedded active GPS microstrip antenna. The antenna is designed for use in handheld devices, PDAs, tracking devices and other embedded applications. It has a low noise figure and high gain active LNA circuitry, providing reliable satellite reception. Key specifications include a peak gain of 3.5dBic, bandwidth of 10MHz, noise figure of 1.8dB max, and size of only 12mm.
Lika Electronic June 2015 Newsletter in EnglishLika Electronic
June 2015 Newsletter - Featured this month
- Lika introduces a complete range of standard 58 mm encoders with POWERLINK, the Ethernet communication interface. Robust magnetic and high resolution optical versions, singleturn and multiturn resolution, solid and hollow shaft mechanical design to solve the most diverse needs.
- SFA draw-wire encoder does not merely offers proven voltage and current analogue signal transmission. It further adds a great operational advantage thanks to the convenient, reliable teach-in function.
This document summarizes a high-performance embedded GPS antenna. It is compact and lightweight, suitable for handheld devices, PDAs, and tracking equipment used in vehicle tracking, military, asset tracking, oil and gas, and other industries. It has a low noise figure and high gain of 2.5 dBic, operating at 1575.42 MHz with right hand circular polarization. Electrical specifications include a bandwidth of 10 MHz, VSWR of 1.3 or less, and optional connectors.
This summary describes an embedded active GPS microstrip antenna. It is compact in size and lightweight, making it suitable for applications like GPS devices, tracking devices, and industrial equipment. It has a low noise figure and high gain of 24dB-28dB. The antenna provides right-hand circular polarization over GPS L1 frequency of 1575.42MHz with a peak gain of 5dBic and bandwidth of 10-15MHz. It has a small form factor of 18mm x 18mm and operates from 2.5-3.5V DC.
This document summarizes an embedded active GPS microstrip antenna. It is designed for applications requiring reliable satellite reception and high accuracy, such as vehicle tracking and navigation devices. The compact antenna features include an active low-noise amplifier circuit, peak gain of 4 dBic, bandwidth of 10 MHz, and support for customization of the connector and cable length. It is ideal for embedded use in handheld devices, industrial equipment, and other applications.
The RUGGEDCOM RS900GP is a 10-port utility-grade, fully managed Ethernet switch, providing dual fiber optic or copper Gigabit Ethernet ports and eight fast Ethernet copper ports, each capable of supplying high power 802.3at compliant power over Ethernet. Designed to operate reliably in harsh industrial environments, the RS900GP provides a high level of immunity to electromagnetic interference and heavy electrical surges typical of environments found in electric utility substations, factory floors or in traffic control cabinets.
The document describes feed-through adapters that connect M12 X-coded cabling to RJ45 cabling. The adapters allow for high-performance 10 Gigabit Ethernet connections in industrial equipment. They provide an IP67 connection from an M12 cable to an IP20 RJ45 connection, such as inside an electrical cabinet. The adapters come in linear and angled versions and support transmission speeds up to 10 Gigabit according to category 6A standards.
This document provides examples of Westermo's oil and gas project applications. It summarizes several projects involving using Westermo networking products for monitoring and data collection from chemical plants, subsea trees, gas distribution meters, wellheads, pipelines, and marine systems. Westermo products like DDWs, RFIs, Lynxes, and ODWs were chosen for their ruggedness, wide temperature tolerance, low power consumption, and ability to operate in harsh industrial environments. The projects spanned locations in Europe, Asia, Africa, and the Middle East.
This document summarizes the specifications of a compact, lightweight embedded active GPS microstrip antenna. The antenna is designed for use in handheld devices, PDAs, tracking devices and other embedded applications. It has a low noise figure and high gain active LNA circuitry, providing reliable satellite reception. Key specifications include a peak gain of 3.5dBic, bandwidth of 10MHz, noise figure of 1.8dB max, and size of only 12mm.
Lika Electronic June 2015 Newsletter in EnglishLika Electronic
June 2015 Newsletter - Featured this month
- Lika introduces a complete range of standard 58 mm encoders with POWERLINK, the Ethernet communication interface. Robust magnetic and high resolution optical versions, singleturn and multiturn resolution, solid and hollow shaft mechanical design to solve the most diverse needs.
- SFA draw-wire encoder does not merely offers proven voltage and current analogue signal transmission. It further adds a great operational advantage thanks to the convenient, reliable teach-in function.
This document summarizes a high-performance embedded GPS antenna. It is compact and lightweight, suitable for handheld devices, PDAs, and tracking equipment used in vehicle tracking, military, asset tracking, oil and gas, and other industries. It has a low noise figure and high gain of 2.5 dBic, operating at 1575.42 MHz with right hand circular polarization. Electrical specifications include a bandwidth of 10 MHz, VSWR of 1.3 or less, and optional connectors.
This summary describes an embedded active GPS microstrip antenna. It is compact in size and lightweight, making it suitable for applications like GPS devices, tracking devices, and industrial equipment. It has a low noise figure and high gain of 24dB-28dB. The antenna provides right-hand circular polarization over GPS L1 frequency of 1575.42MHz with a peak gain of 5dBic and bandwidth of 10-15MHz. It has a small form factor of 18mm x 18mm and operates from 2.5-3.5V DC.
This document summarizes an embedded active GPS microstrip antenna. It is designed for applications requiring reliable satellite reception and high accuracy, such as vehicle tracking and navigation devices. The compact antenna features include an active low-noise amplifier circuit, peak gain of 4 dBic, bandwidth of 10 MHz, and support for customization of the connector and cable length. It is ideal for embedded use in handheld devices, industrial equipment, and other applications.
The RUGGEDCOM RS900GP is a 10-port utility-grade, fully managed Ethernet switch, providing dual fiber optic or copper Gigabit Ethernet ports and eight fast Ethernet copper ports, each capable of supplying high power 802.3at compliant power over Ethernet. Designed to operate reliably in harsh industrial environments, the RS900GP provides a high level of immunity to electromagnetic interference and heavy electrical surges typical of environments found in electric utility substations, factory floors or in traffic control cabinets.
GPS External Active Microstrip Patch AntennaMaxtena
This dual band GPS/GLONASS antenna is designed for vehicle tracking, oil and gas applications, and M2M devices. It has a small size and lightweight design making it suitable for commercial and industrial use. The antenna provides reliable satellite reception and high accuracy through a low noise LNA and support for both GPS and GLONASS systems. It is waterproof and can operate from -40°C to 85°C.
The M1516HCT-P-SMA is a dual band antenna designed for GPS and GLONASS navigation systems. It provides high performance in a compact form factor using Maxtena's proprietary Helicore technology. This screw-on antenna has an integrated SMA connector, is IP-67 rated for protection, and weighs only 11 grams, making it suitable for applications like vehicle tracking, navigation devices, and mobile devices.
The RUGGEDCOM RX1400, thanks to its compact form factor and multi-function capability, offers a cost saving solution for large scale deployments by avoiding the need for multi-device solutions to achieve the needed interface, switching, routing and application hosting capabilities.
This document summarizes the specifications of an embedded active GPS microstrip antenna. The antenna is designed for use in handheld devices, PDAs, and tracking equipment where reliable satellite reception and high accuracy are required. It has a compact size of 25x25mm, right-hand circular polarization, a peak gain of 5.5dBic, and supports GPS L1 frequency of 1575.42MHz with a bandwidth of 20MHz and axial ratio of 1.5dB. The antenna includes an integrated low-noise amplifier with a gain of 34dB and noise figure of 1.5dB maximum.
The RUGGEDCOM RS950G is an IEC 62439-3 Redundancy Box (RedBox), supporting both High Availability Seamless Redundancy (HSR) and Parallel Redundancy Protocol (PRP). The RS950G provides the ultimate in network reliability from any network fault. This is achieved by simultaneously transmitting duplicate packets on independent routes through the network to provide complete path redundancy at the data link layer.
The RUGGEDCOM RS400 is a utility-grade, serial device server with an integrated, fully managed Ethernet switch, designed to operate reliably in electrically harsh and climatically demanding environments
This document proposes a system to remotely monitor domestic power consumption using a microcontroller, energy meter, GSM/GPRS modem, and web server. The energy meter sends pulses to the microcontroller proportionate to power consumption. The microcontroller generates TCP stacks every 10 energy units and sends this data via GSM/GPRS modem to a web server. Users can then monitor power usage from anywhere through the web server or mobile notifications. This allows users to track energy consumption in real-time without monthly bills and identifies high usage appliances.
The document summarizes the top 5 solar inverters:
1. SMA inverters which offer easy installation and commissioning via a smartphone app as well as integrated module optimization.
2. Fronius inverters which are suitable for households and self-consumption systems with integrated energy management and smart features.
3. SolarEdge inverters which are designed to work with power optimizers to provide module-level monitoring and support battery storage.
4. ABB inverters which offer a cost-efficient, high power solution for commercial and industrial systems in a compact wall-mountable design.
5. Solax inverters which provide a flexible hybrid solution for residential and
The M1227HCT-A-SMA is a compact, high performance GPS/GLONASS antenna designed for precision applications. It features exceptional pattern control, high efficiency, and polarization purity. The antenna provides gains of 2dBic within the L1 and L2 bands, rejects out-of-band interference by more than 50dB, and is rated to withstand 50V/m of interference. It is a screw-on design with an integrated SMA connector and O-ring sealing for waterproofing.
The Ruggedcom RS900 is a 9-port Ethernet switch designed for mission-critical applications in harsh environments. It offers high reliability and availability with immunity to electromagnetic interference and electrical surges. The switch has 6 RJ45 ports and 3 optional fiber or copper ports, with an operating temperature range of -40°C to +85°C and various power supply options. It is marketed by DSG Enterprises for industrial networking applications.
This document discusses power quality solutions from a company and its subsidiaries for critical systems. It provides an overview of the company's expertise in areas like AC and DC power distribution, transformers, power monitoring, surge protection, EMP/HEMP protection, and describes their worldwide presence and commitment to customer service. The document is intended for internal use only and confidential.
Relink unveils its new microinverter technology which offers several advantages over traditional string inverters. The microinverters optimize energy output from each PV module and offer improved reliability, safety, monitoring, and lifespan of over 25 years compared to 8-10 years for string inverters. Relink has developed the technology with a world leader in energy conversion and has offices in Malta, Germany and plans to open one in Melbourne in 2016.
KEHUA Residential Energy Storage System Tahnoon Elahi
User friendly:
• Easy installation
• Ultra silent design, noise < 25dB
• Multiple battery configuration, support different battery types
• Flexible application for either new installation or retrofit.
Off-grid Application Compatible:
• In addition, SPH can be installed in a completely off-grid
application when no grid power is available; you can always
be served by our system no matter in city or remote areas.
Reliable:
• Water and dust proof (IP 65), OK for outdoor use
• High quality components maximize service life
Power Export Control:
• SPH system gives you the right to adjust you system export
power. If energy back feed is prohibited, system output will
be adjusted according to load status and restrict power send
to grid.
Efficient:
• Maximum efficiency up to 97.8%
• Super wide MPPT range: 125Vdc – 580Vdc
For further details, mail us tahnoon@kehua.com
The document discusses the GE Intelligent Platforms PAC8000 PNS module, which enables I/O solutions for harsh industrial environments. The PAC8000 operates in a wide temperature range and withstands high vibration. It uses PROFINET communication, requiring only one wire for simplified installation. This allows real-time data collection from remote and hazardous locations.
International Rectifier introduced the IRF4000, an integrated MOSFET solution for Power over Ethernet applications. The IRF4000 combines four MOSFETs into a single package, reducing the footprint by up to 80% compared to individual MOSFET packages. The reduced part count and space savings simplify manufacturing for PoE systems like Ethernet switches. The IRF4000 is rated for 100V and complies with IEEE 802.3af PoE specifications, delivering up to 15W per port in a reliable and thermally optimized package.
KEHUA Tech INDIA - Corporate Presentation Tahnoon Elahi
KEHUA is a manufacturer of Solar PV Inverters (String, Central & Hybrid) and Energy Storage Solutions (PCS, DC-DC Converters) and EV Charging stations actively having its presence in the Indian Market.
GPS External Active Microstrip Patch AntennaMaxtena
This high-performance GPS antenna is designed for vehicle and fleet tracking applications. It has a small size and lightweight design that makes it suitable for commercial and industrial uses. The antenna features an LNA and waterproof housing to support reliable reception in demanding environments. It is intended to support applications like vehicle tracking, asset monitoring, and navigation through specifications like wide bandwidth, high gain, and operation in a broad temperature range.
WWT Magnetic Flow Meter, EMI Signal AnalysisRaden Armanadi
The document records daily measurements from various totalizers and flow meters from December 5-12 that measure liquid transfers and discharges. It compares the readings from two systems - Optiflux and PLC - to check for deviations and communication errors. On some days it notes issues like a PLC reset or shield connection being finished. Overall it analyzes the data to check that the systems are recording measurements accurately and within acceptable error rates.
Radius Power is a company founded in 1999 that designs, tests, and manufactures EMI filters and electronic control products. It has headquarters in Yorba Linda, CA and manufacturing partnerships worldwide. The document provides details on Radius Power's product lines including single phase, three phase, IEC inlet, DC, inverter, medical grade, military, tempest, telecom, and custom EMI filters. It also lists sales representatives and contact information.
GPS External Active Microstrip Patch AntennaMaxtena
This dual band GPS/GLONASS antenna is designed for vehicle tracking, oil and gas applications, and M2M devices. It has a small size and lightweight design making it suitable for commercial and industrial use. The antenna provides reliable satellite reception and high accuracy through a low noise LNA and support for both GPS and GLONASS systems. It is waterproof and can operate from -40°C to 85°C.
The M1516HCT-P-SMA is a dual band antenna designed for GPS and GLONASS navigation systems. It provides high performance in a compact form factor using Maxtena's proprietary Helicore technology. This screw-on antenna has an integrated SMA connector, is IP-67 rated for protection, and weighs only 11 grams, making it suitable for applications like vehicle tracking, navigation devices, and mobile devices.
The RUGGEDCOM RX1400, thanks to its compact form factor and multi-function capability, offers a cost saving solution for large scale deployments by avoiding the need for multi-device solutions to achieve the needed interface, switching, routing and application hosting capabilities.
This document summarizes the specifications of an embedded active GPS microstrip antenna. The antenna is designed for use in handheld devices, PDAs, and tracking equipment where reliable satellite reception and high accuracy are required. It has a compact size of 25x25mm, right-hand circular polarization, a peak gain of 5.5dBic, and supports GPS L1 frequency of 1575.42MHz with a bandwidth of 20MHz and axial ratio of 1.5dB. The antenna includes an integrated low-noise amplifier with a gain of 34dB and noise figure of 1.5dB maximum.
The RUGGEDCOM RS950G is an IEC 62439-3 Redundancy Box (RedBox), supporting both High Availability Seamless Redundancy (HSR) and Parallel Redundancy Protocol (PRP). The RS950G provides the ultimate in network reliability from any network fault. This is achieved by simultaneously transmitting duplicate packets on independent routes through the network to provide complete path redundancy at the data link layer.
The RUGGEDCOM RS400 is a utility-grade, serial device server with an integrated, fully managed Ethernet switch, designed to operate reliably in electrically harsh and climatically demanding environments
This document proposes a system to remotely monitor domestic power consumption using a microcontroller, energy meter, GSM/GPRS modem, and web server. The energy meter sends pulses to the microcontroller proportionate to power consumption. The microcontroller generates TCP stacks every 10 energy units and sends this data via GSM/GPRS modem to a web server. Users can then monitor power usage from anywhere through the web server or mobile notifications. This allows users to track energy consumption in real-time without monthly bills and identifies high usage appliances.
The document summarizes the top 5 solar inverters:
1. SMA inverters which offer easy installation and commissioning via a smartphone app as well as integrated module optimization.
2. Fronius inverters which are suitable for households and self-consumption systems with integrated energy management and smart features.
3. SolarEdge inverters which are designed to work with power optimizers to provide module-level monitoring and support battery storage.
4. ABB inverters which offer a cost-efficient, high power solution for commercial and industrial systems in a compact wall-mountable design.
5. Solax inverters which provide a flexible hybrid solution for residential and
The M1227HCT-A-SMA is a compact, high performance GPS/GLONASS antenna designed for precision applications. It features exceptional pattern control, high efficiency, and polarization purity. The antenna provides gains of 2dBic within the L1 and L2 bands, rejects out-of-band interference by more than 50dB, and is rated to withstand 50V/m of interference. It is a screw-on design with an integrated SMA connector and O-ring sealing for waterproofing.
The Ruggedcom RS900 is a 9-port Ethernet switch designed for mission-critical applications in harsh environments. It offers high reliability and availability with immunity to electromagnetic interference and electrical surges. The switch has 6 RJ45 ports and 3 optional fiber or copper ports, with an operating temperature range of -40°C to +85°C and various power supply options. It is marketed by DSG Enterprises for industrial networking applications.
This document discusses power quality solutions from a company and its subsidiaries for critical systems. It provides an overview of the company's expertise in areas like AC and DC power distribution, transformers, power monitoring, surge protection, EMP/HEMP protection, and describes their worldwide presence and commitment to customer service. The document is intended for internal use only and confidential.
Relink unveils its new microinverter technology which offers several advantages over traditional string inverters. The microinverters optimize energy output from each PV module and offer improved reliability, safety, monitoring, and lifespan of over 25 years compared to 8-10 years for string inverters. Relink has developed the technology with a world leader in energy conversion and has offices in Malta, Germany and plans to open one in Melbourne in 2016.
KEHUA Residential Energy Storage System Tahnoon Elahi
User friendly:
• Easy installation
• Ultra silent design, noise < 25dB
• Multiple battery configuration, support different battery types
• Flexible application for either new installation or retrofit.
Off-grid Application Compatible:
• In addition, SPH can be installed in a completely off-grid
application when no grid power is available; you can always
be served by our system no matter in city or remote areas.
Reliable:
• Water and dust proof (IP 65), OK for outdoor use
• High quality components maximize service life
Power Export Control:
• SPH system gives you the right to adjust you system export
power. If energy back feed is prohibited, system output will
be adjusted according to load status and restrict power send
to grid.
Efficient:
• Maximum efficiency up to 97.8%
• Super wide MPPT range: 125Vdc – 580Vdc
For further details, mail us tahnoon@kehua.com
The document discusses the GE Intelligent Platforms PAC8000 PNS module, which enables I/O solutions for harsh industrial environments. The PAC8000 operates in a wide temperature range and withstands high vibration. It uses PROFINET communication, requiring only one wire for simplified installation. This allows real-time data collection from remote and hazardous locations.
International Rectifier introduced the IRF4000, an integrated MOSFET solution for Power over Ethernet applications. The IRF4000 combines four MOSFETs into a single package, reducing the footprint by up to 80% compared to individual MOSFET packages. The reduced part count and space savings simplify manufacturing for PoE systems like Ethernet switches. The IRF4000 is rated for 100V and complies with IEEE 802.3af PoE specifications, delivering up to 15W per port in a reliable and thermally optimized package.
KEHUA Tech INDIA - Corporate Presentation Tahnoon Elahi
KEHUA is a manufacturer of Solar PV Inverters (String, Central & Hybrid) and Energy Storage Solutions (PCS, DC-DC Converters) and EV Charging stations actively having its presence in the Indian Market.
GPS External Active Microstrip Patch AntennaMaxtena
This high-performance GPS antenna is designed for vehicle and fleet tracking applications. It has a small size and lightweight design that makes it suitable for commercial and industrial uses. The antenna features an LNA and waterproof housing to support reliable reception in demanding environments. It is intended to support applications like vehicle tracking, asset monitoring, and navigation through specifications like wide bandwidth, high gain, and operation in a broad temperature range.
WWT Magnetic Flow Meter, EMI Signal AnalysisRaden Armanadi
The document records daily measurements from various totalizers and flow meters from December 5-12 that measure liquid transfers and discharges. It compares the readings from two systems - Optiflux and PLC - to check for deviations and communication errors. On some days it notes issues like a PLC reset or shield connection being finished. Overall it analyzes the data to check that the systems are recording measurements accurately and within acceptable error rates.
Radius Power is a company founded in 1999 that designs, tests, and manufactures EMI filters and electronic control products. It has headquarters in Yorba Linda, CA and manufacturing partnerships worldwide. The document provides details on Radius Power's product lines including single phase, three phase, IEC inlet, DC, inverter, medical grade, military, tempest, telecom, and custom EMI filters. It also lists sales representatives and contact information.
The document provides instructions for cable installation technicians on how to route cables in a home. It covers selecting cable type, identifying cable runs, hiding cables, drilling entry points, running cables through walls and attics, and protecting cables from damage. Safety precautions are emphasized when working in attics or crawlspaces.
Practical EMC and EMI Control for Engineers and TechniciansLiving Online
This workshop focuses on the issues of interest to you if you are working in design, operation or maintenance of analog or digital systems involving sensors, data acquisition, process control, cables, signal processing, programmable logic controllers, power distribution, high speed logic etc. The circuit board layout section concentrates on design and layout of circuits and components on a printed circuit board. The overall focus is on useful design and systems issues; not about regulations and standards. The idea is that you will take this material back with you to your work and apply the key principles immediately to your design and troubleshooting challenges.
WHO SHOULD ATTEND?
Electrical and electronic engineers and technicians
Engineers and technicians involved in the design and manufacture of electrical and electronic equipment which produce electromagnetic disturbances and may be susceptible to electromagnetic interference
Engineers and technicians involved with the maintenance and service of electrical and electronic equipment
Instrumentation and control engineers and technicians
Those that need to ensure that goods conform to the required standards
Those involved in the marketing and sale of goods that need to comply with the required standards
MORE INFORMATION: http://www.idc-online.com/content/practical-emc-and-emi-control-engineers-and-technicians-2
Emc design and interconnection techniquesUma Rajaram
The document provides recommendations for cable routing and connections to minimize electromagnetic interference (EMI). It recommends:
a) Bonding all building metalwork into a meshed grounding network.
b) Segregating cables by sensitivity level and running them along single routes.
c) Bonding cable screens to equipment shields at both ends, unless prohibited by the equipment manufacturer.
This document discusses electromagnetic interference (EMI), including definitions of key terms, sources of EMI, types of EMI, effects of EMI, and units used to specify EMI parameters. It addresses conducted and radiated EMI, natural and man-made sources of EMI, intra-system and inter-system EMI, and thermal and non-thermal biological effects of EMI. Measurement units covered include voltage, current, electric field strength, and magnetic field strength.
Access the video from this presentation for free from
http://www.rohde-schwarz-usa.com/DebuggingEMISS_On-Demand.html
Overview:
Electromagnetic interference is increasingly becoming a problem in complex systems that must interoperate in both digital and RF domains. When failures due to EMI occur it is often difficult to track down the sources of such failures using standard test receivers and spectrum analyzers. The unique ability of real-time spectrum analysis and synchronous time domain signal acquisition to capture transient events can quickly reveals details about the sources of EMI.
What You Will Learn:
How to isolate and analyze sources of EMI using an oscilloscope
Measurement considerations for correlating time and frequency domains
Near field probing basics
Presented By:
Dave Rishavy, Product Manager Oscilloscopes, Rohde & Schwarz
Dave Rishavy has a BS in Electrical Engineering from Florida State University and an MBA from the University of Colorado. Prior to joining Rohde and Schwarz, Mr. Rishavy gained over 15 years of experience in the test and measurement field at Agilent Technologies. This included positions in a wide range of technical marketing areas such as application engineering, product marketing, marketing management and strategic product planning. While at Agilent, Dave led the marketing and industry segment teams for the Infiniium line of oscilloscopes as well as high end logic analysis.
This document summarizes network components and security techniques. It discusses network segmentation, demilitarized zones, firewalls, routers, switches, wireless networking, encryption, and VPNs. It also covers securing communication channels, voice over IP, multimedia collaboration, and instant messaging protocols. The key topics covered are network design principles, routing, wireless standards, encryption methods, and virtual private networks.
This document provides an overview of electromagnetic interference (EMI) and electromagnetic compatibility (EMC). It defines EMI as an electromagnetic disturbance that can degrade equipment performance or cause malfunctions. EMC is described as a state where equipment functions satisfactorily in a common electromagnetic environment without intolerably disturbing other equipment. The document outlines common sources and effects of EMI and techniques to control EMI at its source, including proper grounding, shielding, filtering, and printed circuit board layout. It also discusses important EMI/EMC standards and standards bodies.
Any training class is a considerable investment in terms of cost and your time. You can’t afford to waste any of your precious time and you need to attend something that is useful and improves your productivity. After five years of presentation throughout the world, this workshop is well polished, practical and relevant.
The aim of this workshop is to help you identify, design, prevent and fix common EMI/EMC problems with a focus on earthing and shielding techniques. Learning how to fix earthing and shielding problems on the job can be very expensive and frustrating. Although it must be noted that most of the principles involved are simple, this workshop will give you the tools to approach earthing and shielding issues in a logical and systematic way.
This workshop focuses on the issues of interest to you if you are working in design, operation or maintenance of analog or digital systems involving sensors, data acquisition, process control, cables, signal processing, programmable logic controllers, power distribution, high speed logic etc.
The circuit board layout section concentrates on design and layout of circuits and components on a printed circuit board. The overall focus is on useful design and systems issues; not about regulations and standards. The idea is that you will take this material back with you to your work and apply the key principles immediately to your design and troubleshooting challenges.
WHO SHOULD ATTEND?
Building service designers
CAD managers
Consulting engineers
Data systems planners and managers
Design engineers
Electrical and instrumentation technicians
Electrical contractors
Electrical engineers
Electrical inspectors
Electricians
EMC specialists
Electronics and systems engineers and technicians
Instrumentation and control engineers
Logic designers
Maintenance engineers
Mechanical engineers
Power system protection and control engineers
Printed circuit board designers
Project engineers
Safety professionals
Signal integrity specialists
Technical managers
Test engineers
MORE INFORMATION: http://www.idc-online.com/content/practical-shielding-emcemi-noise-reduction-earthing-and-circuit-board-layout-66
The document summarizes environmental testing performed on electrical equipment at an environmental test facility. Various labs are described that can simulate environmental conditions like vibration, shock, climate, and EMI/EMC. Specific dynamic and vibration test equipment are listed, as well as climatic chambers, a thermal shock chamber, and vacuum equipment. EMI/EMC testing procedures are discussed including radiated emission, conducted susceptibility, and radiated susceptibility tests. The document provides an analysis of EMI/EMC testing performed on an electrical unit to verify its reliability and compliance with standards.
This document provides an overview of Panduit's cable routing and pathway solutions, including:
1. Panduit offers racking, cabling, containment, pathways, grounding, and pre-configured solutions.
2. Panduit pathways include ladder rack accessories, overhead cable routing systems, and WyrGrid fiberrunner cable routing trays.
3. Panduit pathways provide faster deployment times than wire basket and ladder rack alternatives.
This document provides guidance on selecting and installing surge protection devices (SPDs) for process control systems to protect sensitive electronics from electrical surges. It discusses SPD placement for different applications including hazardous areas, analog and digital I/O, high current signals up to 6A, 4-20mA loops, interposing relays, RTDs, HART communication, and RS232/RS485. SPDs should be installed at both ends of cable runs connecting PLCs, field instruments, and I/O to provide adequate protection from surges traveling on cables.
The document provides an overview of Clipsal's Actassi Category 7A GG45 solution for high bandwidth structured cabling. It includes:
- Category 7A cable and connectors that support transmission speeds up to 10Gbps and beyond through their shielded design and 1,000MHz bandwidth.
- 24-port unloaded patch panels for flexible configuration that meet the ISO Category 7A performance standards.
- Shielded Category 7A patch cords and modular connectors that are backwards compatible while providing protection from interference for reliable 10Gbps transmission.
The solution enables businesses to future proof their network infrastructure for the increasing bandwidth demands of advanced technologies.
The document discusses E-T-A, a leading manufacturer of circuit breakers for equipment protection. It describes E-T-A's history of over 50 years of safety and reliability, research and development efforts, modern manufacturing facilities, and global network of subsidiaries and representatives. The document also highlights several of E-T-A's circuit breaker and power distribution products suited for the communication industry, including hydraulic-magnetic and thermal circuit breakers, as well as rack-based power distribution systems.
PLICSMOBILE uses wireless GSM/GPRS technology to transmit measurement data from remote sensors over long distances via the mobile phone network. It integrates with VEGA's plics modular instrumentation system. PLICSMOBILE reduces costs associated with wiring sensors by simplifying installation and eliminating the need for on-site servicing. Measurement values and settings are transmitted securely and reliably to visualization software from mobile or hard-to-access measuring points using the established GSM/GPRS standard.
The document introduces the Baseband 6648, Ericsson's new baseband unit for 4G and 5G networks. It has the highest RAN compute capacity for installation in equipment racks or enclosures. Key features include support for 10,000 users in mixed 4G/5G mode with throughput of up to 15Gbps downlink and 3Gbps uplink. It will be available for purchase starting in Q1 2020.
Tmax moulded case circuit breakers from ABB guarantee high performance while being compact in size and simple to install, providing safety for the operator. They are ideal for secondary distribution of both alternating and direct current. Tmax circuit breakers feature dedicated protection functions, measurement functions, communication capabilities, and optional modules to upgrade protection.
The document describes Siemens busbar trunking systems SIVACON 8PS, which provide reliable and safe power transportation and distribution from 25A to 6,300A. The systems include the CD-K, BD01, BD2, LD, LX, and LR systems. They offer flexibility, easy planning and installation, and safety through type-tested low-voltage switchboard and controlgear assemblies. The modular systems allow for modifications and expansions to power distribution.
The document describes the Nortel OME 6500, which is an optical transport platform that can consolidate multiple network functions into a single node. It can provide Ethernet aggregation, optical transport, and TDM services. Key features include integrated ROADM and transponder capabilities to allow flexible wavelength switching and transport of 10G, 10GE, 40G and future 100G services. It aims to simplify network design and reduce costs for service providers.
HYpact is a hybrid compact switchgear assembly from Alstom Grid that combines the advantages of SF6 and air insulation technologies. It consists of circuit breakers, disconnectors, and earthing switches in a single modular unit that saves over 50% of space compared to conventional switchgear. HYpact also reduces maintenance needs and offers economic advantages through its modular design and reduced civil works. It is well-suited for demanding environmental conditions and various substation configurations due to its flexibility and robust encapsulated design.
Long Reach Ethernet (LRE) solution, is a Single-port Gigabit Ethernet-over-VDSL2 Converter for connecting ultra-fast FTTx deployment with the existing in-building and in-house telephone wire installation.
VC-231GF features one 1000BASE-X SFP slot for remote optical fiber Ethernet connection and one RJ11 port with the VDSL2 technology to provide an excellent bandwidth of up to a total duplex data rate of 300Mbps and can extend a maximum distance of up to 1.4km (4,593ft) over existing telephone wire to the in-house VDSL2 router or bridge, which overcomes in-house fiber installation problems.
Contact us
Tel: +91-7875432180 Email: sales@bbcpl.in
Website: https://bbcpl.in
This document provides product information and specifications for the Kaelus DBC2037F1V1-1 broadband diplexer. It combines lower frequency bands of 698-960 MHz with higher AWS/PCS bands of 1710-2170 MHz. Key features include integrated AISG modem and monitor port, auto select DC/AISG pass, and lightning protection. Specifications include insertion loss, return loss, isolation, phase and group delay variation, power handling, and environmental ratings. Diagrams show the electrical and mechanical design, including connectors, dimensions, weight and mounting options.
This document provides product specifications for the 123eWireless N45C-1XB1 antenna from Commscope. It lists technical details like operating frequency band, gain, beamwidth, electrical specifications, mechanical dimensions, weight, mounting kits included, and regulatory compliance information. It also provides instructions on how to purchase the antenna from the supplier Launch 3 Telecom, including payment options and same-day shipping.
This document discusses Ericsson's 5G cooperation and knowledge sharing sessions with Etisalat. It provides details on Ericsson's network solutions for a non-standalone 5G deployment, including the use of a gNB, eNB, router, and synchronization components. Diagrams show example network topologies. Technical specifications are given for the AIR 6488 antenna, Baseband 6630, and Router 6471.
The document provides product information and purchasing details for the Kathrein 742-226 XXPol Panel 806-960/1710-2170 antenna. It describes the antenna's technical specifications including frequency range, gain, polarization, power handling, connectors, and dimensions. It also provides ordering instructions and contact information for the supplier, Launch 3 Telecom, along with details about payment, shipping, warranty, services, and installation options.
The Eclipse Edge provides a cost-effective wireless solution for network edge connections using licensed frequency bands between 7-38GHz. It offers a native mixed mode for both TDM and Ethernet transport over the same radio path at up to 32Mbps. The Eclipse Edge has a low profile and lightweight design for simplified installation, as well as low power consumption below 13W for reduced operational costs.
Weg solutions-for-pulp-and-paper-50024433-brochure-englishDaniel García
WEG provides complete solutions for the pulp and paper industry, including motors, automation equipment, energy solutions, and services. They offer products and support for all stages of pulp and paper production from the wood yard to the paper machine. WEG can supply equipment for pulp preparation, papermaking, drying, packaging, and power generation and distribution within a pulp or paper mill.
Kabeldon produces cable distribution cabinets and fusegear for electrical distribution. Their product catalog outlines switching devices, enclosures, and pre-assembled distribution boards. The enclosures are designed for rugged and corrosion resistant use outdoors or indoors. Surface treatments provide outstanding corrosion protection. Distribution boards are available for various applications including utilities, buildings, ports/airports, sports, construction sites, and industry. Planning tools are available to design distribution boards.
Introducing the industry's smallest Combo PON OLTAdtran
Our SDX 6324 optical line terminal (OLT) is specifically designed to deliver high-performance broadband services to low-density applications. The new fiber access platform features four Combo PON ports, providing a perfect balance of cost, size and functionality.
The document describes the Nortel OME 6500 OC192 XFP transceiver. It provides details on how to purchase the product from Launch 3 Telecom, including payment and shipping options. Launch 3 Telecom offers repair services and warranties for the product.
DIN rail mounted I/O modules for Modbus networks. Excellent for industrial and building automation applications where remote I/O must be added to the system. Loaded with features including LED indicators and Manual/Automatic toggle switches for quick and easy installation and trouble shooting. More information can be found at http://www.metz-connect.com/us/search/modbus and/or join the discussion on LinkedIn https://www.linkedin.com/company/industrial-automation
CSI Master Format Specification 271005 Structured Cabling for Voice and DataMETZ CONNECT USA Inc.
Product specifications written in the Construction Specification Institute Master Format style. Structured cabling systems for industrial Ethernet, voice and data, audio and visual networks.
Presentation on connector solutions for the Railroad industry with an emphasis on Industrial Ethernet technologies. Hardened RJ45 connectors, IP65 and IP67 solutions, M12 D-Coded and M12 X-Coded connectors, DIN rail mounted RJ45 and fiber optic terminal blocks.
2014 Cabling Installation & Maintenance: The Strange Physical World of Indust...METZ CONNECT USA Inc.
Industrial Ethernet is a type of Internet of Things used for manufacturing plant floors and process facilities. It is growing rapidly, with 23% of industrial networked nodes in 2011 using Ethernet. Industrial Ethernet accounts for the biggest growth in the Internet of Things. Some key differences from traditional Ethernet include more extreme environments, real-time control needs, and different connector and enclosure types that can withstand vibration, shock, dust and moisture. Connector systems have been hardened from standard RJ45 to rugged M12 and other industrial connectors to ensure reliability in harsh industrial settings.
METZ CONNECT provides device connection systems for industrial Ethernet networks that ensure safe and reliable data transmission. Their product range includes connectors, cables, and panels that integrate components across their copper, fiber optic, and Ethernet M12 lines. This creates system solutions that connect circuit boards to cabling in a secure, flexible way. METZ CONNECT's solutions are designed for harsh industrial environments and provide high transmission performance with protection up to IP67 and bandwidth up to 10 Gbit/s.
Running a new Ethernet drop has been rendered unnecessary! Connect, repair or extend cables up to Cat 7 without the use of special tools. Physically small and robust without the limitations of using a junction box.
Our RJ45 field plug pro allows for easy assembly without special tools! Available in 180 and 360 degree variants, these products are multiport capable and allow for up to 32 different cable positions!
Use any Cat 6A cable with M12 X-Coded Ethernet connectors for 10Gbit speeds! We provide M12 X-Coded jacks for circuit board mounting, single and dual ended cables, RJ45 to panel mount adapters and more.
Main news related to the CCS TSI 2023 (2023/1695)Jakub Marek
An English 🇬🇧 translation of a presentation to the speech I gave about the main changes brought by CCS TSI 2023 at the biggest Czech conference on Communications and signalling systems on Railways, which was held in Clarion Hotel Olomouc from 7th to 9th November 2023 (konferenceszt.cz). Attended by around 500 participants and 200 on-line followers.
The original Czech 🇨🇿 version of the presentation can be found here: https://www.slideshare.net/slideshow/hlavni-novinky-souvisejici-s-ccs-tsi-2023-2023-1695/269688092 .
The videorecording (in Czech) from the presentation is available here: https://youtu.be/WzjJWm4IyPk?si=SImb06tuXGb30BEH .
leewayhertz.com-AI in predictive maintenance Use cases technologies benefits ...alexjohnson7307
Predictive maintenance is a proactive approach that anticipates equipment failures before they happen. At the forefront of this innovative strategy is Artificial Intelligence (AI), which brings unprecedented precision and efficiency. AI in predictive maintenance is transforming industries by reducing downtime, minimizing costs, and enhancing productivity.
Digital Marketing Trends in 2024 | Guide for Staying AheadWask
https://www.wask.co/ebooks/digital-marketing-trends-in-2024
Feeling lost in the digital marketing whirlwind of 2024? Technology is changing, consumer habits are evolving, and staying ahead of the curve feels like a never-ending pursuit. This e-book is your compass. Dive into actionable insights to handle the complexities of modern marketing. From hyper-personalization to the power of user-generated content, learn how to build long-term relationships with your audience and unlock the secrets to success in the ever-shifting digital landscape.
Building Production Ready Search Pipelines with Spark and MilvusZilliz
Spark is the widely used ETL tool for processing, indexing and ingesting data to serving stack for search. Milvus is the production-ready open-source vector database. In this talk we will show how to use Spark to process unstructured data to extract vector representations, and push the vectors to Milvus vector database for search serving.
Monitoring and Managing Anomaly Detection on OpenShift.pdfTosin Akinosho
Monitoring and Managing Anomaly Detection on OpenShift
Overview
Dive into the world of anomaly detection on edge devices with our comprehensive hands-on tutorial. This SlideShare presentation will guide you through the entire process, from data collection and model training to edge deployment and real-time monitoring. Perfect for those looking to implement robust anomaly detection systems on resource-constrained IoT/edge devices.
Key Topics Covered
1. Introduction to Anomaly Detection
- Understand the fundamentals of anomaly detection and its importance in identifying unusual behavior or failures in systems.
2. Understanding Edge (IoT)
- Learn about edge computing and IoT, and how they enable real-time data processing and decision-making at the source.
3. What is ArgoCD?
- Discover ArgoCD, a declarative, GitOps continuous delivery tool for Kubernetes, and its role in deploying applications on edge devices.
4. Deployment Using ArgoCD for Edge Devices
- Step-by-step guide on deploying anomaly detection models on edge devices using ArgoCD.
5. Introduction to Apache Kafka and S3
- Explore Apache Kafka for real-time data streaming and Amazon S3 for scalable storage solutions.
6. Viewing Kafka Messages in the Data Lake
- Learn how to view and analyze Kafka messages stored in a data lake for better insights.
7. What is Prometheus?
- Get to know Prometheus, an open-source monitoring and alerting toolkit, and its application in monitoring edge devices.
8. Monitoring Application Metrics with Prometheus
- Detailed instructions on setting up Prometheus to monitor the performance and health of your anomaly detection system.
9. What is Camel K?
- Introduction to Camel K, a lightweight integration framework built on Apache Camel, designed for Kubernetes.
10. Configuring Camel K Integrations for Data Pipelines
- Learn how to configure Camel K for seamless data pipeline integrations in your anomaly detection workflow.
11. What is a Jupyter Notebook?
- Overview of Jupyter Notebooks, an open-source web application for creating and sharing documents with live code, equations, visualizations, and narrative text.
12. Jupyter Notebooks with Code Examples
- Hands-on examples and code snippets in Jupyter Notebooks to help you implement and test anomaly detection models.
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdfMalak Abu Hammad
Discover how MongoDB Atlas and vector search technology can revolutionize your application's search capabilities. This comprehensive presentation covers:
* What is Vector Search?
* Importance and benefits of vector search
* Practical use cases across various industries
* Step-by-step implementation guide
* Live demos with code snippets
* Enhancing LLM capabilities with vector search
* Best practices and optimization strategies
Perfect for developers, AI enthusiasts, and tech leaders. Learn how to leverage MongoDB Atlas to deliver highly relevant, context-aware search results, transforming your data retrieval process. Stay ahead in tech innovation and maximize the potential of your applications.
#MongoDB #VectorSearch #AI #SemanticSearch #TechInnovation #DataScience #LLM #MachineLearning #SearchTechnology
Nunit vs XUnit vs MSTest Differences Between These Unit Testing Frameworks.pdfflufftailshop
When it comes to unit testing in the .NET ecosystem, developers have a wide range of options available. Among the most popular choices are NUnit, XUnit, and MSTest. These unit testing frameworks provide essential tools and features to help ensure the quality and reliability of code. However, understanding the differences between these frameworks is crucial for selecting the most suitable one for your projects.
Have you ever been confused by the myriad of choices offered by AWS for hosting a website or an API?
Lambda, Elastic Beanstalk, Lightsail, Amplify, S3 (and more!) can each host websites + APIs. But which one should we choose?
Which one is cheapest? Which one is fastest? Which one will scale to meet our needs?
Join me in this session as we dive into each AWS hosting service to determine which one is best for your scenario and explain why!
HCL Notes and Domino License Cost Reduction in the World of DLAUpanagenda
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-and-domino-license-cost-reduction-in-the-world-of-dlau/
The introduction of DLAU and the CCB & CCX licensing model caused quite a stir in the HCL community. As a Notes and Domino customer, you may have faced challenges with unexpected user counts and license costs. You probably have questions on how this new licensing approach works and how to benefit from it. Most importantly, you likely have budget constraints and want to save money where possible. Don’t worry, we can help with all of this!
We’ll show you how to fix common misconfigurations that cause higher-than-expected user counts, and how to identify accounts which you can deactivate to save money. There are also frequent patterns that can cause unnecessary cost, like using a person document instead of a mail-in for shared mailboxes. We’ll provide examples and solutions for those as well. And naturally we’ll explain the new licensing model.
Join HCL Ambassador Marc Thomas in this webinar with a special guest appearance from Franz Walder. It will give you the tools and know-how to stay on top of what is going on with Domino licensing. You will be able lower your cost through an optimized configuration and keep it low going forward.
These topics will be covered
- Reducing license cost by finding and fixing misconfigurations and superfluous accounts
- How do CCB and CCX licenses really work?
- Understanding the DLAU tool and how to best utilize it
- Tips for common problem areas, like team mailboxes, functional/test users, etc
- Practical examples and best practices to implement right away
How to Interpret Trends in the Kalyan Rajdhani Mix Chart.pdfChart Kalyan
A Mix Chart displays historical data of numbers in a graphical or tabular form. The Kalyan Rajdhani Mix Chart specifically shows the results of a sequence of numbers over different periods.
A Comprehensive Guide to DeFi Development Services in 2024Intelisync
DeFi represents a paradigm shift in the financial industry. Instead of relying on traditional, centralized institutions like banks, DeFi leverages blockchain technology to create a decentralized network of financial services. This means that financial transactions can occur directly between parties, without intermediaries, using smart contracts on platforms like Ethereum.
In 2024, we are witnessing an explosion of new DeFi projects and protocols, each pushing the boundaries of what’s possible in finance.
In summary, DeFi in 2024 is not just a trend; it’s a revolution that democratizes finance, enhances security and transparency, and fosters continuous innovation. As we proceed through this presentation, we'll explore the various components and services of DeFi in detail, shedding light on how they are transforming the financial landscape.
At Intelisync, we specialize in providing comprehensive DeFi development services tailored to meet the unique needs of our clients. From smart contract development to dApp creation and security audits, we ensure that your DeFi project is built with innovation, security, and scalability in mind. Trust Intelisync to guide you through the intricate landscape of decentralized finance and unlock the full potential of blockchain technology.
Ready to take your DeFi project to the next level? Partner with Intelisync for expert DeFi development services today!
Ivanti’s Patch Tuesday breakdown goes beyond patching your applications and brings you the intelligence and guidance needed to prioritize where to focus your attention first. Catch early analysis on our Ivanti blog, then join industry expert Chris Goettl for the Patch Tuesday Webinar Event. There we’ll do a deep dive into each of the bulletins and give guidance on the risks associated with the newly-identified vulnerabilities.
Skybuffer SAM4U tool for SAP license adoptionTatiana Kojar
Manage and optimize your license adoption and consumption with SAM4U, an SAP free customer software asset management tool.
SAM4U, an SAP complimentary software asset management tool for customers, delivers a detailed and well-structured overview of license inventory and usage with a user-friendly interface. We offer a hosted, cost-effective, and performance-optimized SAM4U setup in the Skybuffer Cloud environment. You retain ownership of the system and data, while we manage the ABAP 7.58 infrastructure, ensuring fixed Total Cost of Ownership (TCO) and exceptional services through the SAP Fiori interface.
1. REGplus
with variable cable routing
The optimum installation solution for
perfect data and signal flow in the
switch cabinet
2. REGplus – cable routing from above or from below
The steady expansion of global networking and the ever growing volumes involved in data transmission call for an approach
in many fields of application that combines good anticipation and intelligent wiring. There is also a need for several interlin-
king segments to be perfectly compatible with one another. This is the only way to assure future-compliant, seamless and
utterly reliable communication.
The REGplus is the perfect way to install communication capabilities in your switch cabinet. Its modular inserts with plug-in
modules are suitable for a wide range of performance classes in copper and fibre-optics cables.
Even if there is not much space in the distributor cabinet - indeed, particularly in such cases - the new REGplus is right in its
element: When installing the C6Amodul, and this is a ‚first‘, the cable can be connected from above (C6Amodul 180°) or
from below (C6Amodul 270°). Due to the narrow installation width of 1 HP, it is no problem to install up to 12 REGplus units
on the TH35 DIN rail (TH = ‚top hat‘) in a standard electrical distributor cabinet.
When installing a device in protection class I, potential compensation is performed by an integrated potential compensating
spring with direct contact to the TH35 rail. As the C6Amodul is mounted inside the REGplus, it is also protected against di-
rect contact. This retains compliance with protection class II when installed in protection-insulated electrical distributors.
899311-01|06/2013
Modul REGplus IP20, unequipped
1309427103-E
Cable routing from above
REGplus IP20 C6Amodul 180°
130B117003-E
REGplus IP20 E-DAT modul
1309107003-E
REGplus IP20 E-DAT modul
Coupler 180°
1309A07003-E
Cable routing from below
REGplus IP20 C6Amodul 270°
130B127003-E
REGplus IP20 E-DAT modul
Coupler 90°
1309A17003-E
Cable routing from above
Cable routing from below
Example of installation
REGplus installation options Ordering data
• C6Amodul 180°
• C6Amodul 270°
• UAE modul
• E-DAT modul
• E-DAT modul coupler 90°
• E-DAT modul coupler 180°
• OpDAT modul
• KOAX connector /-jacks
• BLIND modul
METZ CONNECT GmbH
Im Tal 2
78176 Blumberg
Germany
Phone +49 77 02 533- 0
Fax + 49 77 02 533-189
info@metz-connect.com
www.metz-connect.com