The document provides specifications for the ComNet CNFE8US Series Ethernet 8 port unmanaged switches. The switches support 10/100 Mbps Ethernet and have either 4 electrical ports and 4 optical SFP ports, 8 electrical ports, or 8 optical SFP ports. They are designed to operate reliably in demanding environments with a lifetime warranty.
SUN-IE100SC-M media converters are designed to transmit and receive 10/100Mbps data over one or
two optic fibers. Units feature half or full duplex mode and Auto-Negotiation to 10Mbps or 100Mbps
Ethernet rate without adjustments. The optical interface operates at a 100Mbps rate. Plug-and play
design ensures ease of installation and no user electrical or optical adjustments are required. The Series
are environmentally hardened to operate in extreme temperatures. Features included are low power
consumption, LED indicators for monitoring equipment link and performance operating status and auto
resettable voltage transient fuses. The Series are outstanding products for transmission of 10/100Mbps
Ethernet signals.
The document provides specifications for the ComNet CNFE8US Series Ethernet 8 port unmanaged switches. The switches support 10/100 Mbps Ethernet and have either 4 electrical ports and 4 optical SFP ports, 8 electrical ports, or 8 optical SFP ports. They are designed to operate reliably in demanding environments with a lifetime warranty.
SUN-IE100SC-M media converters are designed to transmit and receive 10/100Mbps data over one or
two optic fibers. Units feature half or full duplex mode and Auto-Negotiation to 10Mbps or 100Mbps
Ethernet rate without adjustments. The optical interface operates at a 100Mbps rate. Plug-and play
design ensures ease of installation and no user electrical or optical adjustments are required. The Series
are environmentally hardened to operate in extreme temperatures. Features included are low power
consumption, LED indicators for monitoring equipment link and performance operating status and auto
resettable voltage transient fuses. The Series are outstanding products for transmission of 10/100Mbps
Ethernet signals.
AOA industrial fiber media converters provide Ethernet to fiber solutions which be designed to work in harsh environments of temperature extremes, humidity, and vibration that exceed the ranges
This document describes two optical transceiver modules, the EOLS-8512-02-X 1G-BASE SFP+ Transceiver and the EOLP-8596-02-X 10GBASE SFP+ Transceiver. Both modules are designed for multimode fiber communication at 850nm wavelength and comply with laser safety standards. The 10G module can transmit up to 11.3Gbps over 300m of fiber, while the 1G module can transmit up to 1.25Gbps over 550m or 300m of fiber depending on the fiber type. Both modules have a single 3.3V power supply and hot-pluggable duplex LC fiber connectors.
- The document describes the Marathon II microwave radio system for industrial applications, highlighting its key features:
- It uses a modern ASIC modem chip and has a fanless design for low maintenance in remote locations.
- It provides hitless adaptive coding and modulation as well as automatic power control for long distance links with high performance and availability.
- Other features include a user-friendly web interface, managed Gigabit Ethernet switch, low power consumption, and suitability for long distance mountainous or over-water links.
The RUGGEDCOM RS900GP is a 10-port utility-grade, fully managed Ethernet switch, providing dual fiber optic or copper Gigabit Ethernet ports and eight fast Ethernet copper ports, each capable of supplying high power 802.3at compliant power over Ethernet. Designed to operate reliably in harsh industrial environments, the RS900GP provides a high level of immunity to electromagnetic interference and heavy electrical surges typical of environments found in electric utility substations, factory floors or in traffic control cabinets.
IGT-2205AT is an Industrial Gigabit Media Converter providing non-blocking wire-speed performance and great flexibility for Gigabit Ethernet extension in harsh industrial environment. It is equipped with two 10/100/1000BASE-T RJ45 copper port and two 100/1000/2500BASE-X SFP fiber optic interfaces delivered in an IP30 rugged strong case with redundant power system. The IGT-2205AT is well suited for applications in deploying surveillance system, and securing control and wireless service in climatically demanding environments with wide temperature range from -40 to 75 degrees C.
The document summarizes the specifications and features of the ComNet C1PS modular power supply. Some key points:
- It uses automatic electronic current limiting within each rack-mountable module rather than the power supply, preventing shutdown of all modules if one fails.
- Modules are hot-swappable without needing to power down the rack.
- It provides unconditional protection from power surges and other voltage transients.
- Specifications include an input voltage range of 90-264VAC, 9VDC output, and dimensions of 5.25 x 1.95 x 7.75 inches.
Long Reach Ethernet (LRE) solution, is a Single-port Gigabit Ethernet-over-VDSL2 Converter for connecting ultra-fast FTTx deployment with the existing in-building and in-house telephone wire installation.
VC-231GF features one 1000BASE-X SFP slot for remote optical fiber Ethernet connection and one RJ11 port with the VDSL2 technology to provide an excellent bandwidth of up to a total duplex data rate of 300Mbps and can extend a maximum distance of up to 1.4km (4,593ft) over existing telephone wire to the in-house VDSL2 router or bridge, which overcomes in-house fiber installation problems.
Contact us
Tel: +91-7875432180 Email: sales@bbcpl.in
Website: https://bbcpl.in
The C2 rack provides redundant power supply modules for mission-critical applications. It utilizes two power supplies to eliminate single point failures. If one power supply fails, the other can continue powering the twelve rack slots. The power supplies and all modules are hot-swappable for easy maintenance. The C2 design eliminates the risk of a faulty module causing all modules to shut down, as each module has its own overcurrent protection.
Prysmian Group is a leading manufacturer of cables and accessories for power transmission from 33kV to 400kV. They have decades of experience supplying fluid filled cable accessories worldwide, including straight joints, stop joints, outdoor terminations, and SF6-immersed terminations. Prysmian can customize accessories to meet specific client needs and has supplied thousands of kilometers of fluid filled cables and accessories globally from their manufacturing plant in Bishopstoke, UK. As power grids increasingly focus on sustainability, Prysmian's cable solutions help transmit power efficiently and reduce total cost of ownership for customers.
Durability, availability and performance reliability are the qualities that best describe the RUGGEDCOM RSG2100 / RSG2100P 32-port Ethernet switch – whether configured with 4 modular Gigabit uplink ports and 128-bit encryption or to support Power-over-Ethernet.
The document describes rack-mounting adaptor bracket kits for ComNet ValueLine series managed Ethernet switches. It introduces three kits - RMB-1 for single modules up to 9.85 inches wide, RMB-2 for single modules of 8.6 inches wide, and RMB-3 for mounting two 8.6 inch modules. The kits include brackets and hardware to mount the switches in standard 19-inch racks and cabinets.
The RUGGEDCOM RS900 is a 9-port utility-grade, fully managed Ethernet switch, specifically designed to operate reliably in electrically harsh and climatically demanding environments. The RS900 provides a high level of immunity to electromagnetic interference and heavy electrical surges typical of environments found on plant floors or in curbside traffic control cabinets. An operating temperature range of –40 to +85°C (–40 to +185°F), together with hazardous location certification (Class 1 Division 2), allows the RS900 to be placed in almost any location.
Ahcene Boudjema has over 15 years of experience as a GSM network technician and machine operator. He has extensive experience commissioning and installing telecom equipment for GSM networks in Algeria, including rectifiers, power supplies, batteries, distribution frames, and base transceiver stations. Currently, he works as a machine operator at Spx Cooling Technologies in Olathe, Kansas, where he operates precision machinery and ensures high quality production. He is proficient in GSM, DCS, transmission systems, radio links, and software like B7, B8, B9, and B10.
This document provides information on Prysmian's high voltage (HV) product range, including cables and accessories for 66kV, 132kV, and other voltages. It details cable constructions, available conductor sizes, fault current ratings, and accessories. Prysmian has experience supplying and installing HV cable systems worldwide and provides design, installation, and after-sales support services. The document includes product information sheets on cable types, accessories, joints, link boxes, and bonding/earthing equipment.
Mega-Fit® Power Connectors deliver cutting-edge current density at 23.0A per circuit; terminals provide six independent contact points for long-term reliability in virtually every industry and application.
AOA industrial fiber media converters provide Ethernet to fiber solutions which be designed to work in harsh environments of temperature extremes, humidity, and vibration that exceed the ranges
This document describes two optical transceiver modules, the EOLS-8512-02-X 1G-BASE SFP+ Transceiver and the EOLP-8596-02-X 10GBASE SFP+ Transceiver. Both modules are designed for multimode fiber communication at 850nm wavelength and comply with laser safety standards. The 10G module can transmit up to 11.3Gbps over 300m of fiber, while the 1G module can transmit up to 1.25Gbps over 550m or 300m of fiber depending on the fiber type. Both modules have a single 3.3V power supply and hot-pluggable duplex LC fiber connectors.
- The document describes the Marathon II microwave radio system for industrial applications, highlighting its key features:
- It uses a modern ASIC modem chip and has a fanless design for low maintenance in remote locations.
- It provides hitless adaptive coding and modulation as well as automatic power control for long distance links with high performance and availability.
- Other features include a user-friendly web interface, managed Gigabit Ethernet switch, low power consumption, and suitability for long distance mountainous or over-water links.
The RUGGEDCOM RS900GP is a 10-port utility-grade, fully managed Ethernet switch, providing dual fiber optic or copper Gigabit Ethernet ports and eight fast Ethernet copper ports, each capable of supplying high power 802.3at compliant power over Ethernet. Designed to operate reliably in harsh industrial environments, the RS900GP provides a high level of immunity to electromagnetic interference and heavy electrical surges typical of environments found in electric utility substations, factory floors or in traffic control cabinets.
IGT-2205AT is an Industrial Gigabit Media Converter providing non-blocking wire-speed performance and great flexibility for Gigabit Ethernet extension in harsh industrial environment. It is equipped with two 10/100/1000BASE-T RJ45 copper port and two 100/1000/2500BASE-X SFP fiber optic interfaces delivered in an IP30 rugged strong case with redundant power system. The IGT-2205AT is well suited for applications in deploying surveillance system, and securing control and wireless service in climatically demanding environments with wide temperature range from -40 to 75 degrees C.
The document summarizes the specifications and features of the ComNet C1PS modular power supply. Some key points:
- It uses automatic electronic current limiting within each rack-mountable module rather than the power supply, preventing shutdown of all modules if one fails.
- Modules are hot-swappable without needing to power down the rack.
- It provides unconditional protection from power surges and other voltage transients.
- Specifications include an input voltage range of 90-264VAC, 9VDC output, and dimensions of 5.25 x 1.95 x 7.75 inches.
Long Reach Ethernet (LRE) solution, is a Single-port Gigabit Ethernet-over-VDSL2 Converter for connecting ultra-fast FTTx deployment with the existing in-building and in-house telephone wire installation.
VC-231GF features one 1000BASE-X SFP slot for remote optical fiber Ethernet connection and one RJ11 port with the VDSL2 technology to provide an excellent bandwidth of up to a total duplex data rate of 300Mbps and can extend a maximum distance of up to 1.4km (4,593ft) over existing telephone wire to the in-house VDSL2 router or bridge, which overcomes in-house fiber installation problems.
Contact us
Tel: +91-7875432180 Email: sales@bbcpl.in
Website: https://bbcpl.in
The C2 rack provides redundant power supply modules for mission-critical applications. It utilizes two power supplies to eliminate single point failures. If one power supply fails, the other can continue powering the twelve rack slots. The power supplies and all modules are hot-swappable for easy maintenance. The C2 design eliminates the risk of a faulty module causing all modules to shut down, as each module has its own overcurrent protection.
Prysmian Group is a leading manufacturer of cables and accessories for power transmission from 33kV to 400kV. They have decades of experience supplying fluid filled cable accessories worldwide, including straight joints, stop joints, outdoor terminations, and SF6-immersed terminations. Prysmian can customize accessories to meet specific client needs and has supplied thousands of kilometers of fluid filled cables and accessories globally from their manufacturing plant in Bishopstoke, UK. As power grids increasingly focus on sustainability, Prysmian's cable solutions help transmit power efficiently and reduce total cost of ownership for customers.
Durability, availability and performance reliability are the qualities that best describe the RUGGEDCOM RSG2100 / RSG2100P 32-port Ethernet switch – whether configured with 4 modular Gigabit uplink ports and 128-bit encryption or to support Power-over-Ethernet.
The document describes rack-mounting adaptor bracket kits for ComNet ValueLine series managed Ethernet switches. It introduces three kits - RMB-1 for single modules up to 9.85 inches wide, RMB-2 for single modules of 8.6 inches wide, and RMB-3 for mounting two 8.6 inch modules. The kits include brackets and hardware to mount the switches in standard 19-inch racks and cabinets.
The RUGGEDCOM RS900 is a 9-port utility-grade, fully managed Ethernet switch, specifically designed to operate reliably in electrically harsh and climatically demanding environments. The RS900 provides a high level of immunity to electromagnetic interference and heavy electrical surges typical of environments found on plant floors or in curbside traffic control cabinets. An operating temperature range of –40 to +85°C (–40 to +185°F), together with hazardous location certification (Class 1 Division 2), allows the RS900 to be placed in almost any location.
Ahcene Boudjema has over 15 years of experience as a GSM network technician and machine operator. He has extensive experience commissioning and installing telecom equipment for GSM networks in Algeria, including rectifiers, power supplies, batteries, distribution frames, and base transceiver stations. Currently, he works as a machine operator at Spx Cooling Technologies in Olathe, Kansas, where he operates precision machinery and ensures high quality production. He is proficient in GSM, DCS, transmission systems, radio links, and software like B7, B8, B9, and B10.
This document provides information on Prysmian's high voltage (HV) product range, including cables and accessories for 66kV, 132kV, and other voltages. It details cable constructions, available conductor sizes, fault current ratings, and accessories. Prysmian has experience supplying and installing HV cable systems worldwide and provides design, installation, and after-sales support services. The document includes product information sheets on cable types, accessories, joints, link boxes, and bonding/earthing equipment.
Mega-Fit® Power Connectors deliver cutting-edge current density at 23.0A per circuit; terminals provide six independent contact points for long-term reliability in virtually every industry and application.
SUN-IE100SC-M media converters are designed to transmit and receive 10/100Mbps data over one or
two optic fibers. Units feature half or full duplex mode and Auto-Negotiation to 10Mbps or 100Mbps
Ethernet rate without adjustments. The optical interface operates at a 100Mbps rate. Plug-and play
design ensures ease of installation and no user electrical or optical adjustments are required. The Series
are environmentally hardened to operate in extreme temperatures. Features included are low power
consumption, LED indicators for monitoring equipment link and performance operating status and auto
resettable voltage transient fuses. The Series are outstanding products for transmission of 10/100Mbps
Ethernet signals.
The document describes an industrial 8-port Ethernet switch with 2 gigabit ports that can operate in temperatures from -40 to 75 degrees Celsius. It has 8 10/100TX ports and 2 combo ports that can be used as either gigabit Ethernet ports or SFP fiber ports. The switch is designed for use in harsh industrial environments like factories and buildings.
This document discusses mobile backhaul and Ethernet 4G (E4G) solutions from Extreme Networks. It provides an overview of key areas of investment for service providers, including mobile backhaul, campus, datacenter, and virtualization networks. It also describes Extreme's E4G product lines for cell site routers and aggregation routers, which provide carrier-grade Ethernet switching and resiliency, as well as timing and pseudowire functionality to support 2G, 3G, and 4G mobile networks.
The Eclipse Edge provides a cost-effective wireless solution for network edge connections using licensed frequency bands between 7-38GHz. It offers a native mixed mode for both TDM and Ethernet transport over the same radio path at up to 32Mbps. The Eclipse Edge has a low profile and lightweight design for simplified installation, as well as low power consumption below 13W for reduced operational costs.
Looking for reliable networking devices for your small to medium-sized business or home network? Check out Versitron SG 6 Port Gigabit Ethernet Switch and 6 Port Unmanaged SFP Switch.
TAINET ENTU 763GO SFP to SFP Media ConverterTAINET
TIANET's ENTU 763GO SFP to SFP media converter has two SFP sockets. It can convert two optical digital signals of SFP modules, which maybe different wavelength, different distance or different mode (single mode/multi mode fiber) and same speed at 100M Hz or 1G Hz auto detection. It allows the operator to maintain the ENTU 763GO with IEEE 802.3ah Link Layer OAM and TS-1000 OAM at CO or CPE mode.
The AI-1 is an 8-channel analog input module that can be installed in an Electro-Voice N8000 system. It features balanced inputs, 24-bit A/D conversion, and a dynamic range of 117dB. The module processes audio signals with 48-bit word length and provides additional analog inputs to the system with sampling at 48kHz and a delay of 1.375ms. It is installed by removing the rear panel blind, inserting the module, and securing it with screws.
The document describes a Samsung SMT-3232 32-inch LED monitor. It supports resolutions up to 1920 x 1080 with a contrast ratio of 5000:1 and response time of 8ms. It has video inputs including HDMI, DVI, VGA, and component. It has OSD display functions and optional VESA mounting and a stand. Dimensions are 721.4 x 420.3 x 49.9mm without the stand.
In the rapidly evolving landscape of technologies, XML continues to play a vital role in structuring, storing, and transporting data across diverse systems. The recent advancements in artificial intelligence (AI) present new methodologies for enhancing XML development workflows, introducing efficiency, automation, and intelligent capabilities. This presentation will outline the scope and perspective of utilizing AI in XML development. The potential benefits and the possible pitfalls will be highlighted, providing a balanced view of the subject.
We will explore the capabilities of AI in understanding XML markup languages and autonomously creating structured XML content. Additionally, we will examine the capacity of AI to enrich plain text with appropriate XML markup. Practical examples and methodological guidelines will be provided to elucidate how AI can be effectively prompted to interpret and generate accurate XML markup.
Further emphasis will be placed on the role of AI in developing XSLT, or schemas such as XSD and Schematron. We will address the techniques and strategies adopted to create prompts for generating code, explaining code, or refactoring the code, and the results achieved.
The discussion will extend to how AI can be used to transform XML content. In particular, the focus will be on the use of AI XPath extension functions in XSLT, Schematron, Schematron Quick Fixes, or for XML content refactoring.
The presentation aims to deliver a comprehensive overview of AI usage in XML development, providing attendees with the necessary knowledge to make informed decisions. Whether you’re at the early stages of adopting AI or considering integrating it in advanced XML development, this presentation will cover all levels of expertise.
By highlighting the potential advantages and challenges of integrating AI with XML development tools and languages, the presentation seeks to inspire thoughtful conversation around the future of XML development. We’ll not only delve into the technical aspects of AI-powered XML development but also discuss practical implications and possible future directions.
How to Get CNIC Information System with Paksim Ga.pptxdanishmna97
Pakdata Cf is a groundbreaking system designed to streamline and facilitate access to CNIC information. This innovative platform leverages advanced technology to provide users with efficient and secure access to their CNIC details.
Pushing the limits of ePRTC: 100ns holdover for 100 daysAdtran
At WSTS 2024, Alon Stern explored the topic of parametric holdover and explained how recent research findings can be implemented in real-world PNT networks to achieve 100 nanoseconds of accuracy for up to 100 days.
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAUpanagenda
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-und-domino-lizenzkostenreduzierung-in-der-welt-von-dlau/
DLAU und die Lizenzen nach dem CCB- und CCX-Modell sind für viele in der HCL-Community seit letztem Jahr ein heißes Thema. Als Notes- oder Domino-Kunde haben Sie vielleicht mit unerwartet hohen Benutzerzahlen und Lizenzgebühren zu kämpfen. Sie fragen sich vielleicht, wie diese neue Art der Lizenzierung funktioniert und welchen Nutzen sie Ihnen bringt. Vor allem wollen Sie sicherlich Ihr Budget einhalten und Kosten sparen, wo immer möglich. Das verstehen wir und wir möchten Ihnen dabei helfen!
Wir erklären Ihnen, wie Sie häufige Konfigurationsprobleme lösen können, die dazu führen können, dass mehr Benutzer gezählt werden als nötig, und wie Sie überflüssige oder ungenutzte Konten identifizieren und entfernen können, um Geld zu sparen. Es gibt auch einige Ansätze, die zu unnötigen Ausgaben führen können, z. B. wenn ein Personendokument anstelle eines Mail-Ins für geteilte Mailboxen verwendet wird. Wir zeigen Ihnen solche Fälle und deren Lösungen. Und natürlich erklären wir Ihnen das neue Lizenzmodell.
Nehmen Sie an diesem Webinar teil, bei dem HCL-Ambassador Marc Thomas und Gastredner Franz Walder Ihnen diese neue Welt näherbringen. Es vermittelt Ihnen die Tools und das Know-how, um den Überblick zu bewahren. Sie werden in der Lage sein, Ihre Kosten durch eine optimierte Domino-Konfiguration zu reduzieren und auch in Zukunft gering zu halten.
Diese Themen werden behandelt
- Reduzierung der Lizenzkosten durch Auffinden und Beheben von Fehlkonfigurationen und überflüssigen Konten
- Wie funktionieren CCB- und CCX-Lizenzen wirklich?
- Verstehen des DLAU-Tools und wie man es am besten nutzt
- Tipps für häufige Problembereiche, wie z. B. Team-Postfächer, Funktions-/Testbenutzer usw.
- Praxisbeispiele und Best Practices zum sofortigen Umsetzen
Maruthi Prithivirajan, Head of ASEAN & IN Solution Architecture, Neo4j
Get an inside look at the latest Neo4j innovations that enable relationship-driven intelligence at scale. Learn more about the newest cloud integrations and product enhancements that make Neo4j an essential choice for developers building apps with interconnected data and generative AI.
“An Outlook of the Ongoing and Future Relationship between Blockchain Technologies and Process-aware Information Systems.” Invited talk at the joint workshop on Blockchain for Information Systems (BC4IS) and Blockchain for Trusted Data Sharing (B4TDS), co-located with with the 36th International Conference on Advanced Information Systems Engineering (CAiSE), 3 June 2024, Limassol, Cyprus.
Removing Uninteresting Bytes in Software FuzzingAftab Hussain
Imagine a world where software fuzzing, the process of mutating bytes in test seeds to uncover hidden and erroneous program behaviors, becomes faster and more effective. A lot depends on the initial seeds, which can significantly dictate the trajectory of a fuzzing campaign, particularly in terms of how long it takes to uncover interesting behaviour in your code. We introduce DIAR, a technique designed to speedup fuzzing campaigns by pinpointing and eliminating those uninteresting bytes in the seeds. Picture this: instead of wasting valuable resources on meaningless mutations in large, bloated seeds, DIAR removes the unnecessary bytes, streamlining the entire process.
In this work, we equipped AFL, a popular fuzzer, with DIAR and examined two critical Linux libraries -- Libxml's xmllint, a tool for parsing xml documents, and Binutil's readelf, an essential debugging and security analysis command-line tool used to display detailed information about ELF (Executable and Linkable Format). Our preliminary results show that AFL+DIAR does not only discover new paths more quickly but also achieves higher coverage overall. This work thus showcases how starting with lean and optimized seeds can lead to faster, more comprehensive fuzzing campaigns -- and DIAR helps you find such seeds.
- These are slides of the talk given at IEEE International Conference on Software Testing Verification and Validation Workshop, ICSTW 2022.
HCL Notes and Domino License Cost Reduction in the World of DLAUpanagenda
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-and-domino-license-cost-reduction-in-the-world-of-dlau/
The introduction of DLAU and the CCB & CCX licensing model caused quite a stir in the HCL community. As a Notes and Domino customer, you may have faced challenges with unexpected user counts and license costs. You probably have questions on how this new licensing approach works and how to benefit from it. Most importantly, you likely have budget constraints and want to save money where possible. Don’t worry, we can help with all of this!
We’ll show you how to fix common misconfigurations that cause higher-than-expected user counts, and how to identify accounts which you can deactivate to save money. There are also frequent patterns that can cause unnecessary cost, like using a person document instead of a mail-in for shared mailboxes. We’ll provide examples and solutions for those as well. And naturally we’ll explain the new licensing model.
Join HCL Ambassador Marc Thomas in this webinar with a special guest appearance from Franz Walder. It will give you the tools and know-how to stay on top of what is going on with Domino licensing. You will be able lower your cost through an optimized configuration and keep it low going forward.
These topics will be covered
- Reducing license cost by finding and fixing misconfigurations and superfluous accounts
- How do CCB and CCX licenses really work?
- Understanding the DLAU tool and how to best utilize it
- Tips for common problem areas, like team mailboxes, functional/test users, etc
- Practical examples and best practices to implement right away
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdfPaige Cruz
Monitoring and observability aren’t traditionally found in software curriculums and many of us cobble this knowledge together from whatever vendor or ecosystem we were first introduced to and whatever is a part of your current company’s observability stack.
While the dev and ops silo continues to crumble….many organizations still relegate monitoring & observability as the purview of ops, infra and SRE teams. This is a mistake - achieving a highly observable system requires collaboration up and down the stack.
I, a former op, would like to extend an invitation to all application developers to join the observability party will share these foundational concepts to build on:
Essentials of Automations: The Art of Triggers and Actions in FMESafe Software
In this second installment of our Essentials of Automations webinar series, we’ll explore the landscape of triggers and actions, guiding you through the nuances of authoring and adapting workspaces for seamless automations. Gain an understanding of the full spectrum of triggers and actions available in FME, empowering you to enhance your workspaces for efficient automation.
We’ll kick things off by showcasing the most commonly used event-based triggers, introducing you to various automation workflows like manual triggers, schedules, directory watchers, and more. Plus, see how these elements play out in real scenarios.
Whether you’re tweaking your current setup or building from the ground up, this session will arm you with the tools and insights needed to transform your FME usage into a powerhouse of productivity. Join us to discover effective strategies that simplify complex processes, enhancing your productivity and transforming your data management practices with FME. Let’s turn complexity into clarity and make your workspaces work wonders!
In his public lecture, Christian Timmerer provides insights into the fascinating history of video streaming, starting from its humble beginnings before YouTube to the groundbreaking technologies that now dominate platforms like Netflix and ORF ON. Timmerer also presents provocative contributions of his own that have significantly influenced the industry. He concludes by looking at future challenges and invites the audience to join in a discussion.
Programming Foundation Models with DSPy - Meetup SlidesZilliz
Prompting language models is hard, while programming language models is easy. In this talk, I will discuss the state-of-the-art framework DSPy for programming foundation models with its powerful optimizers and runtime constraint system.
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?Speck&Tech
ABSTRACT: A prima vista, un mattoncino Lego e la backdoor XZ potrebbero avere in comune il fatto di essere entrambi blocchi di costruzione, o dipendenze di progetti creativi e software. La realtà è che un mattoncino Lego e il caso della backdoor XZ hanno molto di più di tutto ciò in comune.
Partecipate alla presentazione per immergervi in una storia di interoperabilità, standard e formati aperti, per poi discutere del ruolo importante che i contributori hanno in una comunità open source sostenibile.
BIO: Sostenitrice del software libero e dei formati standard e aperti. È stata un membro attivo dei progetti Fedora e openSUSE e ha co-fondato l'Associazione LibreItalia dove è stata coinvolta in diversi eventi, migrazioni e formazione relativi a LibreOffice. In precedenza ha lavorato a migrazioni e corsi di formazione su LibreOffice per diverse amministrazioni pubbliche e privati. Da gennaio 2020 lavora in SUSE come Software Release Engineer per Uyuni e SUSE Manager e quando non segue la sua passione per i computer e per Geeko coltiva la sua curiosità per l'astronomia (da cui deriva il suo nickname deneb_alpha).
Unlocking Productivity: Leveraging the Potential of Copilot in Microsoft 365, a presentation by Christoforos Vlachos, Senior Solutions Manager – Modern Workplace, Uni Systems
UiPath Test Automation using UiPath Test Suite series, part 5DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 5. In this session, we will cover CI/CD with devops.
Topics covered:
CI/CD with in UiPath
End-to-end overview of CI/CD pipeline with Azure devops
Speaker:
Lyndsey Byblow, Test Suite Sales Engineer @ UiPath, Inc.
UiPath Test Automation using UiPath Test Suite series, part 5
ComNet CNGE4US Data Sheet
1. LIFETIME WARRANTY WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427
FEATURES
› 10/100/1000 Mbps Ethernet
› Environmentally Hardened for use in unconditioned
installations
› All ports support 1000 Mbps full duplex data
› Automatic MDI/MDI-X crossover
› Designed to meet full compliance with the environmental
requirements (ambient operating temperature, mechanical
shock, vibration, humidity with condensation, high-line/low-
line voltage conditions and transient voltage protection) of
NEMA TS-1/TS-2 and the Caltrans Specification for Traffic
Signal Control Equipment.
› No In-field optical adjustments required
› Voltage transient protection on all power and signal input/
output lines provides protection from power surges and
other voltage transient events.
› Power and Port status indicating LEDs
› IEEE 802.3 compliant
› Hot-swappable rack modules
› Interchangeable between stand-alone or rack mount use –
ComFit
› Lifetime Warranty
APPLICATIONS
› 10/100/1000 Mbps Gigabit Ethernet
› High Speed Computer Links
The ComNet™
CNGE4US Ethernet 4 port unmanaged switches are designed to
transmit and receive 10/100/1000 Mbps data using small form factor pluggable
modules. Both are environmentally hardened to operate in demanding environments.
LED indicators are provided for confirming equipment operating status. Plug-and-play
design ensures ease of installation requiring no optical adjustments. Packaged in the
exclusive ComNet ComFit housing, these units may be either wall or rack-mounted, or
may be DIN-rail mounted by the addition of ComNet model DINBKT1 adaptor plate.
CNGE4US
10/100/1000 Mbps 4 Port Ethernet Unmanaged Switch
4ALL GIGABIT
* SFP = Small Form-Factor Pluggable Module
FLEXIBILITYHARDENEDINCLUDED