The digital refractometers have an extensive range of scale types for use in a wide variety of applications. The equipment is sturdy and has a long battery life. For More Information Please Logon http://goo.gl/ti6E9D
Kamstrup RHI Compliant Heat Meters & Thermal Energy Measurement - Multical 60...Thorne & Derrick UK
MULTICAL 602 is an energy calculator that measures heat, cooling, and combined heat/cooling. It connects to flow sensors and temperature sensors to calculate energy usage. It has a long battery life, stores consumption data daily/hourly, and has various communication options. Its info codes and data loggers monitor the system for errors and allow troubleshooting. It provides accurate measurements over its lifetime to optimize building operations and energy billing.
The document describes the ACM-AVM-2614 air volume measurement meter. It measures air flow volume, temperature, and velocity using a hot wire probe. It has applications in HVAC, clean rooms, and the automotive industry. The meter uses the pitot-tube principle and features a portable, easy-to-use design with a protective PVC or FRP casing. It has a large LCD display, data logging, printing capabilities, and a rechargeable battery for portable use. Measurements include air flow from 150-3000 cubic meters per hour with 5% accuracy.
Major Project Report on overheat and smoke detection with GSM module in final year of Undergraduate course in Electronics and Communication Engineering
HIOKI Application: Measure Insolation and Temperature Wirelessly when Testing...NIHON DENKEI SINGAPORE
This application provides a method for wirelessly capturing actinometer and temperature data at the desired timing during measurement.
Record the output from an actinometer or calibrated sunlight sensor (compact module) and a thermocouple using the Wireless Voltage/Temp Logger LR8515. Use the captured data correcting IV curves and other maintenance and preventive work.
Since there’s no need to connect to an IV curve measuring instrument or other device, bothersome wiring is eliminated
Cotton purification process in spinning millis using pic microcontrollerEcway Technologies
This document describes an automated cotton purification process using a PIC microcontroller that avoids direct contact between sensors and the petrochemical liquid. Magnetic sensors attached to the process container detect liquid levels and signal the microcontroller to turn the motor on or off. A thermistor monitors the temperature and alerts operators if it exceeds 390C. The microcontroller displays the liquid level and temperature on an LCD and automates pumping without requiring operator supervision.
In this project, we will create a standalone web server using a NodeMCU ESP8266 that displays the Temperature and Humidity with a DHT11 sensor using the Arduino IDE.
Actually, the webserver we will build can be easily accessed with any device that features a browser on your local network. NodeMCU ESP8266 Monitoring DHT11/DHT22 Temperature and Humidity with Local Web Server.
Thermal Imaging in your Maintenance Program: Intermediate Infrared Concepts a...Transcat
Industrial Maintenance Professionals, please join us on August 2nd for the latest Thermal Imaging best practices webinar presented by Sat Sandhu, Thermography Services Support Manager Thermal / Infrared Thermography, Level III, Fluke. View our Fluke Thermal Imager Selection Guide: http://www.transcat.com/calibration-resources/selection-guides/fluke-thermal-imager/
Kamstrup RHI Compliant Heat Meters & Thermal Energy Measurement - Multical 60...Thorne & Derrick UK
MULTICAL 602 is an energy calculator that measures heat, cooling, and combined heat/cooling. It connects to flow sensors and temperature sensors to calculate energy usage. It has a long battery life, stores consumption data daily/hourly, and has various communication options. Its info codes and data loggers monitor the system for errors and allow troubleshooting. It provides accurate measurements over its lifetime to optimize building operations and energy billing.
The document describes the ACM-AVM-2614 air volume measurement meter. It measures air flow volume, temperature, and velocity using a hot wire probe. It has applications in HVAC, clean rooms, and the automotive industry. The meter uses the pitot-tube principle and features a portable, easy-to-use design with a protective PVC or FRP casing. It has a large LCD display, data logging, printing capabilities, and a rechargeable battery for portable use. Measurements include air flow from 150-3000 cubic meters per hour with 5% accuracy.
Major Project Report on overheat and smoke detection with GSM module in final year of Undergraduate course in Electronics and Communication Engineering
HIOKI Application: Measure Insolation and Temperature Wirelessly when Testing...NIHON DENKEI SINGAPORE
This application provides a method for wirelessly capturing actinometer and temperature data at the desired timing during measurement.
Record the output from an actinometer or calibrated sunlight sensor (compact module) and a thermocouple using the Wireless Voltage/Temp Logger LR8515. Use the captured data correcting IV curves and other maintenance and preventive work.
Since there’s no need to connect to an IV curve measuring instrument or other device, bothersome wiring is eliminated
Cotton purification process in spinning millis using pic microcontrollerEcway Technologies
This document describes an automated cotton purification process using a PIC microcontroller that avoids direct contact between sensors and the petrochemical liquid. Magnetic sensors attached to the process container detect liquid levels and signal the microcontroller to turn the motor on or off. A thermistor monitors the temperature and alerts operators if it exceeds 390C. The microcontroller displays the liquid level and temperature on an LCD and automates pumping without requiring operator supervision.
In this project, we will create a standalone web server using a NodeMCU ESP8266 that displays the Temperature and Humidity with a DHT11 sensor using the Arduino IDE.
Actually, the webserver we will build can be easily accessed with any device that features a browser on your local network. NodeMCU ESP8266 Monitoring DHT11/DHT22 Temperature and Humidity with Local Web Server.
Thermal Imaging in your Maintenance Program: Intermediate Infrared Concepts a...Transcat
Industrial Maintenance Professionals, please join us on August 2nd for the latest Thermal Imaging best practices webinar presented by Sat Sandhu, Thermography Services Support Manager Thermal / Infrared Thermography, Level III, Fluke. View our Fluke Thermal Imager Selection Guide: http://www.transcat.com/calibration-resources/selection-guides/fluke-thermal-imager/
Manufacturers and Suppliers of Electromagnetic Flow Meters | Manas Microsyst...Sara Gawali
An ultrasonic flow meter are used for measures the velocity of a fluid with ultrasound to calculate volume flow. We have the wide range of Bulk Type Ultrasonic flow meter, Clamp on Type Ultrasonic flow meter and Insertion Ultrasonic flow meter.
The document provides a basic technical description of an ultrasonic heat meter. It details the meter's safety requirements, operating principles, installation instructions, and technical specifications. The meter measures thermal energy consumption in closed heating and cooling systems. It calculates heat energy based on flow rate and temperature difference measurements from ultrasonic sensors and Pt500 temperature sensors. The meter achieves a class 2 accuracy level for energy and volumetric flow measurements.
This document describes an automatic fan and light controller project that uses a microcontroller to monitor temperature and light intensity in order to control a fan and lamp. It aims to reduce power consumption and assist disabled people. The system uses an Arduino board connected to sensors to measure temperature and light and control appliances via relays. It was found to potentially save 40% of energy consumption compared to uncontrolled fans and lights. The economic analysis showed the system would pay for itself within 6 months.
The Fyrite InTech is a combustion analyzer designed to measure stack temperature, oxygen levels, and calculate efficiency in residential furnaces. It features an easy-to-read LCD display, internal data storage, and field-replaceable sensors to minimize downtime. The compact, portable device provides accurate efficiency readings and diagnostics with intuitive push-button operation for reduced service times.
Slides of the webinar on common pitfalls when installing hvac sensorsVaisala Group
Choosing the right instrument for your HVAC application and needs is important but it's just as vital to make sure that your HVAC device is installed correctly.
In this webinar Vaisala's Senior Product Manager Lars Stormbom talks about some of the most common pitfalls when installing some common types of HVAC sensors:
Wall mounted humidity and temperature sensors
Wall mounted CO2 sensors
Duct mounted humidity and temperature sensors
Duct mounted CO2 sensors
Outdoor Humidity and temperature sensors
Outdoor CO2 sensors
The technician installed a data logger and scope to measure voltage noise on the supply circuit of an aftertreatment temperature sensor. During testing, the data logger captured abnormal temperature jumps and an ASIC failure in the sensor, even though the supply voltage stayed in range. The supplier later confirmed the ASIC failure after inspecting the sensor. The data logger also helped translate Cummins fault codes to specific supplier fault codes, identifying the issue as an ASIC failure in the temperature sensor.
Yokogawa has a long history of supplying process gas chromatographs to the oil & gas, refining and petrochemical industries around the world. The new process GC that meets the ever growing demands for analytical reliability and precision while improving the total cost-of ownership through built-in automated maintenance functions never seen before.
From the innovative 12-inch color touch screen HMI to the powerful predictive diagnostics, the GC8000 is truly a process GC for the 21st century. But the GC8000 is not just all about new electronics; it also brings a number of important innovations in gas chromatograph analytical capabilities. For the first time, parallel chromatography is made practical with the introduction of the GC Module (GCM) concept. By setting up virtual GCs within a single analyzer, all chromatograph settings, displays, and data are truly segregated for easy understanding and maintenance. There are even built-in graphical overview screens showing each of the individual GC Modules.
The GC8000 sets new standards for process gas chromatography while at the same time offering hardware and electronics that are recognized for robust and reliable operation.
This document describes an automatic DC fan system using an LM35 temperature sensor that is controlled by an Arduino UNO. The system has two DC fans, one for exhaust and one for supply. It also has LED indicators and displays the temperature on an LCD. Based on the measured temperature from the LM35, the Arduino turns on the appropriate fans and LEDs. For example, if the temperature is below 20°C only the white LED is on, and between 26-29°C the supply fan is turned on along with white and yellow LEDs. The system aims to automatically control fans to regulate temperature in a greenhouse.
The document describes a smart solar water heater prototype called Helioptimus that mixes hot and cold water to provide water at a user-defined temperature. It uses temperature and volume sensors, a microcontroller, and a pumping system. The temperature sensors measure the temperature of the hot and cold water. The volume sensor measures the water level in the bucket. The microcontroller receives the temperature readings and uses PID control to determine how much of each water to pump into the mixer tank. Challenges included inconsistent pumping rates and sensor issues. Improvements could include better sensors and control of water flow.
The AL-7010 digital altimeter provides altitude, barometric pressure, temperature, and humidity readings. It displays altitude and pressure histories over the past 12 hours with graphical representations. Additional features include max/min memory, pressure trend indicators, a perpetual calendar, and weather forecasting based on barometric pressure readings. The altimeter measures altitude from -500 to 9000 meters and pressure from 300 to 1100 hPa with resolutions of 1 meter or foot and 1 hPa respectively. Standard accessories include a belt clip and manual.
This document provides specifications for various combustion, tachometer, and hygrometer equipment made by Dwyer Instruments, including models that monitor carbon monoxide and dioxide levels, measure rotational speed, and measure humidity and temperature. The models can be used for applications like measuring flue gases, calibrating boiler systems, combustion tests, and monitoring indoor air quality. The document also states that Dwyer Instruments' name and logos cannot be reproduced or used without permission.
The ultrasonic heating and cooling energy meter SKU-03 is designed to measure and record heating and cooling energy consumption separately. It can be used for commercial metering of energy usage in residential and commercial buildings. The meter uses ultrasonic flow measurement and has features such as separate registers for heating and cooling, user-defined display parameters, pulse inputs/outputs, M-Bus and wireless communication, tariff functions, and data logging of hourly, daily and monthly consumption values. It has an accuracy of class 2 and measures energy in units such as kWh, MWh and GJ.
A document made by me on how our IIoT solutions have helped this refinery to optimise their steam distribution process which led them to have a combined loss of Rs 73,80,000 in 3 years.
The Digital Salinity Refractometers are highly accurate and precise optical instruments. These digital refractometers use latest and precise optical cells.
Quality water deionizers- deionizer water systems, four bed water deionizer manufacturers, water deionizer suppliers India, four bed water deionizer, water deioniser manufacturers India, water deioniser systems, water deionizers suppliers, four bed water deionisers, water deionizers India. For More Information Please Logon http://goo.gl/WwG9J1
We are manufacturers & exporters of wagner shaking machine manufacturers, laboratory shaking machine, wagners shaking machine India, lab shaking machine suppliers, wagner shaking machine. For More Information Please Logon http://cutt.us/1ezBm
We are manufacturers of circulatory water bath, circulatory water bath India, circulatory water bath suppliers, water bath equipments. We supply all type of equipments of laboratory and hospitals. For More Information Please Logon http://goo.gl/lXiUsS
The document describes a rotary flask shaker that is used to shake liquid in glass flasks in research laboratories. It has a heavy platform fitted with rubber discs that can hold flasks ranging in size from 50ml to 1000ml. The platform is mounted on ball bearings and given an orbital circular motion by a motor to shake the flasks. The shaker unit comes in various platform sizes that can hold different numbers of flasks and is powered by a 0.25HP or 0.5HP motor running on 220V, 50Hz AC supply.
Microcoulomb Analyzer is designed by the microcoulomb analysis technology and Faraday law.The sample is
injected into the combustion tube, oxidative pyrolysis converts the sulfur to sulfur dioxide which then fows into a
titration cell where it reacts with triiodide ion present in the electrolyte.
Manufacturers and Suppliers of Electromagnetic Flow Meters | Manas Microsyst...Sara Gawali
An ultrasonic flow meter are used for measures the velocity of a fluid with ultrasound to calculate volume flow. We have the wide range of Bulk Type Ultrasonic flow meter, Clamp on Type Ultrasonic flow meter and Insertion Ultrasonic flow meter.
The document provides a basic technical description of an ultrasonic heat meter. It details the meter's safety requirements, operating principles, installation instructions, and technical specifications. The meter measures thermal energy consumption in closed heating and cooling systems. It calculates heat energy based on flow rate and temperature difference measurements from ultrasonic sensors and Pt500 temperature sensors. The meter achieves a class 2 accuracy level for energy and volumetric flow measurements.
This document describes an automatic fan and light controller project that uses a microcontroller to monitor temperature and light intensity in order to control a fan and lamp. It aims to reduce power consumption and assist disabled people. The system uses an Arduino board connected to sensors to measure temperature and light and control appliances via relays. It was found to potentially save 40% of energy consumption compared to uncontrolled fans and lights. The economic analysis showed the system would pay for itself within 6 months.
The Fyrite InTech is a combustion analyzer designed to measure stack temperature, oxygen levels, and calculate efficiency in residential furnaces. It features an easy-to-read LCD display, internal data storage, and field-replaceable sensors to minimize downtime. The compact, portable device provides accurate efficiency readings and diagnostics with intuitive push-button operation for reduced service times.
Slides of the webinar on common pitfalls when installing hvac sensorsVaisala Group
Choosing the right instrument for your HVAC application and needs is important but it's just as vital to make sure that your HVAC device is installed correctly.
In this webinar Vaisala's Senior Product Manager Lars Stormbom talks about some of the most common pitfalls when installing some common types of HVAC sensors:
Wall mounted humidity and temperature sensors
Wall mounted CO2 sensors
Duct mounted humidity and temperature sensors
Duct mounted CO2 sensors
Outdoor Humidity and temperature sensors
Outdoor CO2 sensors
The technician installed a data logger and scope to measure voltage noise on the supply circuit of an aftertreatment temperature sensor. During testing, the data logger captured abnormal temperature jumps and an ASIC failure in the sensor, even though the supply voltage stayed in range. The supplier later confirmed the ASIC failure after inspecting the sensor. The data logger also helped translate Cummins fault codes to specific supplier fault codes, identifying the issue as an ASIC failure in the temperature sensor.
Yokogawa has a long history of supplying process gas chromatographs to the oil & gas, refining and petrochemical industries around the world. The new process GC that meets the ever growing demands for analytical reliability and precision while improving the total cost-of ownership through built-in automated maintenance functions never seen before.
From the innovative 12-inch color touch screen HMI to the powerful predictive diagnostics, the GC8000 is truly a process GC for the 21st century. But the GC8000 is not just all about new electronics; it also brings a number of important innovations in gas chromatograph analytical capabilities. For the first time, parallel chromatography is made practical with the introduction of the GC Module (GCM) concept. By setting up virtual GCs within a single analyzer, all chromatograph settings, displays, and data are truly segregated for easy understanding and maintenance. There are even built-in graphical overview screens showing each of the individual GC Modules.
The GC8000 sets new standards for process gas chromatography while at the same time offering hardware and electronics that are recognized for robust and reliable operation.
This document describes an automatic DC fan system using an LM35 temperature sensor that is controlled by an Arduino UNO. The system has two DC fans, one for exhaust and one for supply. It also has LED indicators and displays the temperature on an LCD. Based on the measured temperature from the LM35, the Arduino turns on the appropriate fans and LEDs. For example, if the temperature is below 20°C only the white LED is on, and between 26-29°C the supply fan is turned on along with white and yellow LEDs. The system aims to automatically control fans to regulate temperature in a greenhouse.
The document describes a smart solar water heater prototype called Helioptimus that mixes hot and cold water to provide water at a user-defined temperature. It uses temperature and volume sensors, a microcontroller, and a pumping system. The temperature sensors measure the temperature of the hot and cold water. The volume sensor measures the water level in the bucket. The microcontroller receives the temperature readings and uses PID control to determine how much of each water to pump into the mixer tank. Challenges included inconsistent pumping rates and sensor issues. Improvements could include better sensors and control of water flow.
The AL-7010 digital altimeter provides altitude, barometric pressure, temperature, and humidity readings. It displays altitude and pressure histories over the past 12 hours with graphical representations. Additional features include max/min memory, pressure trend indicators, a perpetual calendar, and weather forecasting based on barometric pressure readings. The altimeter measures altitude from -500 to 9000 meters and pressure from 300 to 1100 hPa with resolutions of 1 meter or foot and 1 hPa respectively. Standard accessories include a belt clip and manual.
This document provides specifications for various combustion, tachometer, and hygrometer equipment made by Dwyer Instruments, including models that monitor carbon monoxide and dioxide levels, measure rotational speed, and measure humidity and temperature. The models can be used for applications like measuring flue gases, calibrating boiler systems, combustion tests, and monitoring indoor air quality. The document also states that Dwyer Instruments' name and logos cannot be reproduced or used without permission.
The ultrasonic heating and cooling energy meter SKU-03 is designed to measure and record heating and cooling energy consumption separately. It can be used for commercial metering of energy usage in residential and commercial buildings. The meter uses ultrasonic flow measurement and has features such as separate registers for heating and cooling, user-defined display parameters, pulse inputs/outputs, M-Bus and wireless communication, tariff functions, and data logging of hourly, daily and monthly consumption values. It has an accuracy of class 2 and measures energy in units such as kWh, MWh and GJ.
A document made by me on how our IIoT solutions have helped this refinery to optimise their steam distribution process which led them to have a combined loss of Rs 73,80,000 in 3 years.
The Digital Salinity Refractometers are highly accurate and precise optical instruments. These digital refractometers use latest and precise optical cells.
Quality water deionizers- deionizer water systems, four bed water deionizer manufacturers, water deionizer suppliers India, four bed water deionizer, water deioniser manufacturers India, water deioniser systems, water deionizers suppliers, four bed water deionisers, water deionizers India. For More Information Please Logon http://goo.gl/WwG9J1
We are manufacturers & exporters of wagner shaking machine manufacturers, laboratory shaking machine, wagners shaking machine India, lab shaking machine suppliers, wagner shaking machine. For More Information Please Logon http://cutt.us/1ezBm
We are manufacturers of circulatory water bath, circulatory water bath India, circulatory water bath suppliers, water bath equipments. We supply all type of equipments of laboratory and hospitals. For More Information Please Logon http://goo.gl/lXiUsS
The document describes a rotary flask shaker that is used to shake liquid in glass flasks in research laboratories. It has a heavy platform fitted with rubber discs that can hold flasks ranging in size from 50ml to 1000ml. The platform is mounted on ball bearings and given an orbital circular motion by a motor to shake the flasks. The shaker unit comes in various platform sizes that can hold different numbers of flasks and is powered by a 0.25HP or 0.5HP motor running on 220V, 50Hz AC supply.
Microcoulomb Analyzer is designed by the microcoulomb analysis technology and Faraday law.The sample is
injected into the combustion tube, oxidative pyrolysis converts the sulfur to sulfur dioxide which then fows into a
titration cell where it reacts with triiodide ion present in the electrolyte.
The document describes the Brix refractometer Model ACB-1. It is a handheld, digital refractometer that uses an optical prism to precisely measure the concentration of solutions by their refractive index. The prism is made of metal to quickly conform to sample temperatures. It comes with a carrying pouch and can measure the Brix level of fruits, juices, oils, and other solutions. Refractometers work by comparing the refractive index of a sample to that of the prism to determine concentration.
Our Polyester Moisture Meter utilizes the relationship between moisture content and electrical resistance
of the material which always bears fixed relation to effectively measure the moisture content of Polyester
fibers.
Bromine Number/Bromine Index Analyzer is an intelligent instrument which is based on microcoulomb principle and adopts microcomputer to treat data and control measurement and electrolysis. For More Information Please Logon http://goo.gl/hMBPqu
Rotap Sieve Shaker is driven by ¼ H.P. Electricx motor through a reduction gear, can
carry upto SIX , 6 OR 8 /12 /18 Test Sieves with one set of LID AND Pan . This Rotap
motion of the table there is an upward and downward movement but is inclined from
the vertical axis and the direction or inclination charges progressively in clockwise
direction having frequency of about 270 vibrations per minutes. Unit having six
Stainless Steel needles fixed on Stainless Steel pipe of approx 12.5 mm dia with side
water tap.
This document describes an automatic polarimeter device used to measure the optical rotation of organic substances. It can measure properties like specific gravity, purity, concentration, and content of active materials in substances like sugar solutions, turpentine oil, and camphor. The polarimeter uses polarizing filters and a quartz disc to produce a divided field of view for measurements. It has a measuring range of -45° to +45° and can achieve high accuracy and reproducibility. The device is powered by sodium vapor or mercury lamps and can be used in industries like oil, food processing, chemistry, and more.
The digital refractometers have an extensive range of scale types for use in a wide variety of applications. The equipment is sturdy and has a long battery life. For More Information Please Logon http://goo.gl/Qyx5CM
Features include mass unit conversion, pcs counting, animal weighing, modes for stable and unstable weighing
environments, Selectable auto power off time, Selectable calibration on / off function, digital printing options, back
light on/off selection and many more which will ease your weighing application.
Refractometers are optical devices used to measure the refractive index of substances. They can measure properties like salinity, concentration, specific gravity, and blood proteins of liquids. Digital refractometers have a range of scales for various applications and are precise, while handheld refractometers allow for convenient and rapid measurement of samples. Refractometers work by measuring how much a substance bends light passing through it, using the shadow created to determine the refractive index and sample properties. They are commonly used in industries like winemaking, food processing, and aquariums.
We are suppliers of Infrared moisture balance, Infrared moisture balance manufacturers, moisture balance India, infrared balance India, moisture analyzer balance, moisture balance suppliers, Infrared moisture balance manufacturers. For More Information Please Logon For More Information Please Logon http://goo.gl/HXMjsk
The digital clinical refractomers, which are ideally used for urine and serum protein analysis are extremely accurate and precise optical instruments. These digital clinical refratometers use latest and specific optical cells. These refractomers use digital picture processing technique and accurate temperature compensation. Advanced microprocessor is centre of the digital clinical refractometer which measures the serum protein and urine explicit gravity with precisions displays as three and half figures number liquid crystal displayer. The refractometer is simple to operate and easy to carry. This equipment is very sturdy and has a long battery life. For More Information Please Logon http://goo.gl/s8AAGw
The digital brix refractometers are highly accurate and precise optical instruments. These digital refratometers use latest and precise optical cells. These refractomers use digital picture processing technique and accurate temperature compensation. Advanced microprocessor is centre of the digital brix refractomer which measure the brix of the liquid with precisions displays as three and half figures number liquid crystal displayer. For More Information Please Logon http://goo.gl/KiMw4K
The document summarizes Kongsberg Maritime's engine monitoring systems, which monitor aspects of marine engine performance and condition. The systems monitor bearing wear, bearing and cylinder temperatures, water in oil content, and torque/power. Key components include wireless temperature sensors for crankshaft and crosshead bearings, bearing wear sensors, and torque measurement systems based on optical detection of shaft twist. The monitoring systems provide early detection of potential issues to improve safety and avoid unexpected repair costs.
This document describes the installation and testing of a digital fuel indicator system that displays the amount of fuel in a vehicle's tank numerically (e.g. in liters or milliliters), rather than just bars. The system uses a float sensor connected to a variable resistor to detect the fuel level. An electronics kit with a microcontroller, ADC, and LCD display then processes the sensor output and calibrates it to display the fuel amount. The authors redesigned the irregularly shaped fuel tank to be rectangular for easier sensor installation. Their tests showed accurate readings down to 0.5 liters remaining, below which a buzzer was activated.
The digital refractometers have an extensive range of scale types for use in a wide variety of applications. The equipment is sturdy and has a long battery life.
Weiber Digital Refractometer which has been developed for compactness and ease of
operation. It is ideal for the quality control, research and development of new products
within the food, beverage and other industries. A reading of the DBX-55A can be shown to
the second decimal place.
This document describes the development of a digital hygrometer system using a low-cost capacitive moisture sensor to measure trace moisture in the range of 3.7-100 ppm. The sensor consists of a nonporous thin film of alumina coated between two parallel gold electrodes. An AVR microcontroller is used to convert the analog sensor data to digital and calibrate it to a moisture measurement in ppm. Testing showed the system achieves an accuracy of ±1 ppm when compared to a commercial dew point meter.
This document describes a tea moisture meter model ACM-TMM-2664 produced by Technologies Pvt. Ltd. The meter can accurately measure both the moisture level from 7-31% and temperature from -10 to 65°C of tea leaves. It uses an advanced microprocessor and crystal circuit to provide fast, accurate readings. Additional features include data hold, calibration, wide measuring ranges, and a compact, durable design. The meter is intended to help tea producers ensure optimal drying and quality control of their products.
This document describes an embedded system for measuring the temperature of an automotive engine. It discusses two methods for measuring engine temperature - using a thermistor or using an LM35 temperature sensor.
The system uses an AT89C55 microcontroller as the central processing unit and runs the μC/OS-II real-time operating system. It constructs an automatic measurement system that accurately and reliably measures temperature. Temperature readings are displayed on a graphical LCD and transmitted via UART serial communication.
The document provides details on temperature measurement circuits using a thermistor or LM35 sensor. It also includes diagrams of the schematic for the measurement system embedded in an engine control unit and photos of the prototype temperature measurement system constructed
This document provides instructions for setting up and using a computerized diesel engine test setup. The setup consists of a single cylinder diesel engine connected to a dynamometer for loading. Sensors measure combustion pressure, temperature, fuel and air flow. Signals are interfaced to a computer for performance analysis using supplied software. Installation requires assembling components, connecting piping and wiring, and commissioning includes filling fluids, calibrating sensors, and ensuring data displays and engine operation as expected. Troubleshooting tips are provided for common issues.
This document describes two devices for measuring water levels in dug wells: a mechanical device and an ultrasonic (SONAR) device.
The mechanical device uses a float attached to the device by a wire to measure depth. As the float sinks and the wire plays out, a sensor counts rotations of a pulley to calculate depth. When the float touches water, a circuit is completed to signal the reading.
The SONAR device uses an ultrasonic sensor to measure distance to the water surface by emitting a pulse and measuring the echo return time. The sensor's range is increased using a parabolic reflector to concentrate the acoustic beam. Both devices aim to be low-cost, portable, and battery-powered for
Weiber Technical Solutions launches its new version of
moisture meter that incorporates a range of design
refinements and highly developed features to bring a
Top Quality 2-in-1 Meter that detect moisture &
temperature.
Development of microcontroller based instrument for checking quality of edibl...eSAT Journals
Abstract Edible oils plays a very important role in human beings in third generation , because lots of people suffer from fat , asthama , blood pressure , etc due to consuming a lower quality of oils in their daily life , so I decided to design and develop an instrument which can easily display the quality of oil on the basis of some parameters . The one of the main reason of lowering down the quality of oil is carbon due to heating, so if we can measure the amount or percentage of carbon in the oil we can prevent so many bad things to happen. So I have designed a low cost microcontroller based instrument which measures the amount of carbon in oil by measuring capacitance of oil with the help of a capacitive sensor[1].This is not only the one application of this instrument , this instrument also plays an important role in automobile industries , as it can be used for checking the condition of mobile oils in vehicles , in today’s busy life people don’t have time to check engine oil , power steering oil even they don’t have time to maintain their own vehicle , so I thought if I put this type of instrument as an indicator at the meter section of cars and motorbikes people can read out the condition of engine oil and before the oil goes into the worst condition they can change their oils.This instrument can also be used by various food departments etc where they can check various samples of different companies and decides the price of oils and can check the quality whether the quality of oil is in safe range or not.
Development of microcontroller based instrument for checking quality of edibl...eSAT Publishing House
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
"Moisture meters manufacturer, moisture meter suppliers, moisture meter manufacturer India, moisture meter exporters, moisture meters India, moisture meters, digital moisture meters, moisture meters supplier India, moister meter, moister meters India, digital moister meter suppliers. For More Information Please Logon http://goo.gl/wiqMCh
This document describes a coir moisture meter model ACM-CMM-2650 that measures both moisture levels from 0-50% and temperature from -10°C to 65°C. It uses an advanced microprocessor and crystal time base for high accuracy measurements. The meter has a backlit LCD display, self-calibration and hold functions, and measures moisture levels even in hard to reach areas of coir. It operates on 4 AA batteries and has a compact, durable design making it easy to use for applications like verifying drying times and construction practices.
Now a days 90% of accidents happening due to silly reason of alcohol drinking. so we introduce this project for saftey of people and preventing accidents due to alcohol consumption.
11901621030_Digital control System_Priyashree Nandi.pdfNerupaSharma
A digital controller receives input signals measuring properties like impedance, compares the actual values to targets, and sends control signals to adjust components accordingly. It works by measuring the actual state of a device, comparing it to the target state, and taking action to stop or allow heating as needed. Digital controllers offer advantages like flexibility, inexpensive implementation using microcontrollers, and resistance to environmental impacts compared to analog controllers. They are commonly used in industrial heating systems to stably control temperature within safety limits.
Similar to Digital Coolant & Battery Refractometer by ACMAS Technologies Pvt Ltd. (20)
pH Meters,soil ph meters,portable ph meters,ph meters for water testing, pH sensors,Laboratory pH meters,pH Measuring instruments For More Information Please Logon http://cutt.us/7aMHZ
Table Top Copper Concentration Meter, Banch Top Copper Concentration Analyzer, High Quality Table Top Copper Concentration Sensor, Portable Copper Concentration Measurement System For More Information Please Logon http://cutt.us/HAbK
Weiber's Multi function reactor is an ideal instrument for performing multiple functions as ascertaining Chemical
Oxygen Demand, i.e. COD and TP / TN. COD is necessary to ascertain the oxygen requirement of waste water prior to its release into the environment, so that it can be monitored and controlled to avoid harmful effects on the nature, human beings, etc.
Weiber's Colorimeter is ideal equipment for research and general applications in the field of analysis of
concentration of a solute. Our equipment is useful in the process of colorimetry where we examine a certain known solution by measuring the wavelengths of light absorbed by it.
Water Hardness Meters, Water Softeners, Water Hardness Tester, Handheld Water Hardness Testing System, Weiber Pocket Water Hardness Tester, Portable Water Hardness Meter, Water Hardness Monitor, On-Line Water Hardness Analyzer, Water Hardness Test Kit, Water Quality Testers, Benchtop Water Hardness Meters For More Information Please Logon http://cutt.us/dAW7
The microprocessor based automatic, advance, electronic and latest designed COD Analyzers are used for detection of Chemical Oxygen Demand. The Laboratory COD analyzer acts as water analyzer for detection of Chemical Oxygen Demand in both polluted and normal water. Weiber water analyzer works as high quality analysis tool for determination of inorganic pollution, waste water, sewage and Plant Effluent Treatment. For More Information Please Logon http://goo.gl/gaktwZ
The Microprocessor Based Hardness Testers is highly developed Water Hardness Meter, which is best for
analytical usages in testing and research, laboratories and production plants. This microprocessor based table
top water hardness meter is capable of measuring total hardness and Ion concentration with great accuracy.
The Eco. Series TDS Meter are most economical and highly accurate multi parameter meters. These type of
meters are best when, multiple parameter in the given solution require to be checked in the field or production
floor.
The Portable pH Meters are very economical microprocessor based pH/mV meter, is best for routine use in schools, laboratories and manufacture plants. This microprocessor based hand help pH meter is easy to carry
and use in field as well as the laboratories.
pH Meters,soil ph meters,portable ph meters,ph meters for water testing, pH sensors,Laboratory pH meters,pH Measuring instruments For More Information Please Logon http://cutt.us/Bjy1
The Ph Meters of this series is economical icroprocessor based pH/mV meter, is best for routine use in schools, laboratories and manufacture plants. This microprocessor based table top pH meter is capable of measuring pH/mV value and Ion concentration measurement with an Ion selective electrode.
Multi parameter micro processor based highly accurate pH and conductivity meters These type of meters are best when, other than one parameter in the given solution need to be checked and recorded. The combination of the parameters makes very handy and user friendly. For More Information Please Logon http://goo.gl/nbk6ab
Portable pH Dissolved Oxygen Meters, Dissolved Oxygen Meter for Lab, Dissolved Oxygen Ph Meter, Benchtop pH Dissolved Oxygen Meters For More Information Please Logon http://cutt.us/it8f
Multi parameter micro processor based highly accurate meters. These type of meters are ideal when,multiple
parameter in the given solution need to be checked and recorded.
The pH Conductivity Meters are multi parameter micro processor based highly accurate pH and conductivity meters these type of meters are best when, more than one parameter in the given solution require to be checked and recorded.For More Information Please Logon http://goo.gl/VEvLke
Water Silver Content Detector, Economical Water Silver Content Detector, Water Silver content Analyzer, Water Silver content Meter, Water Silver content Tester,Water Silver content Chaker,Water Silver content Sensor For More Information Please Logon http://cutt.us/gpx3
Water Selenium Content Detector, Economical Water Selenium Content Detector, Water Selenium content Analyzer, Water Selenium content Meter, Water Selenium content Tester,Water Selenium content Chaker,Water Selenium content Sensor For More Information Please Logon http://cutt.us/G1rg
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdfMalak Abu Hammad
Discover how MongoDB Atlas and vector search technology can revolutionize your application's search capabilities. This comprehensive presentation covers:
* What is Vector Search?
* Importance and benefits of vector search
* Practical use cases across various industries
* Step-by-step implementation guide
* Live demos with code snippets
* Enhancing LLM capabilities with vector search
* Best practices and optimization strategies
Perfect for developers, AI enthusiasts, and tech leaders. Learn how to leverage MongoDB Atlas to deliver highly relevant, context-aware search results, transforming your data retrieval process. Stay ahead in tech innovation and maximize the potential of your applications.
#MongoDB #VectorSearch #AI #SemanticSearch #TechInnovation #DataScience #LLM #MachineLearning #SearchTechnology
AI 101: An Introduction to the Basics and Impact of Artificial IntelligenceIndexBug
Imagine a world where machines not only perform tasks but also learn, adapt, and make decisions. This is the promise of Artificial Intelligence (AI), a technology that's not just enhancing our lives but revolutionizing entire industries.
Monitoring and Managing Anomaly Detection on OpenShift.pdfTosin Akinosho
Monitoring and Managing Anomaly Detection on OpenShift
Overview
Dive into the world of anomaly detection on edge devices with our comprehensive hands-on tutorial. This SlideShare presentation will guide you through the entire process, from data collection and model training to edge deployment and real-time monitoring. Perfect for those looking to implement robust anomaly detection systems on resource-constrained IoT/edge devices.
Key Topics Covered
1. Introduction to Anomaly Detection
- Understand the fundamentals of anomaly detection and its importance in identifying unusual behavior or failures in systems.
2. Understanding Edge (IoT)
- Learn about edge computing and IoT, and how they enable real-time data processing and decision-making at the source.
3. What is ArgoCD?
- Discover ArgoCD, a declarative, GitOps continuous delivery tool for Kubernetes, and its role in deploying applications on edge devices.
4. Deployment Using ArgoCD for Edge Devices
- Step-by-step guide on deploying anomaly detection models on edge devices using ArgoCD.
5. Introduction to Apache Kafka and S3
- Explore Apache Kafka for real-time data streaming and Amazon S3 for scalable storage solutions.
6. Viewing Kafka Messages in the Data Lake
- Learn how to view and analyze Kafka messages stored in a data lake for better insights.
7. What is Prometheus?
- Get to know Prometheus, an open-source monitoring and alerting toolkit, and its application in monitoring edge devices.
8. Monitoring Application Metrics with Prometheus
- Detailed instructions on setting up Prometheus to monitor the performance and health of your anomaly detection system.
9. What is Camel K?
- Introduction to Camel K, a lightweight integration framework built on Apache Camel, designed for Kubernetes.
10. Configuring Camel K Integrations for Data Pipelines
- Learn how to configure Camel K for seamless data pipeline integrations in your anomaly detection workflow.
11. What is a Jupyter Notebook?
- Overview of Jupyter Notebooks, an open-source web application for creating and sharing documents with live code, equations, visualizations, and narrative text.
12. Jupyter Notebooks with Code Examples
- Hands-on examples and code snippets in Jupyter Notebooks to help you implement and test anomaly detection models.
In his public lecture, Christian Timmerer provides insights into the fascinating history of video streaming, starting from its humble beginnings before YouTube to the groundbreaking technologies that now dominate platforms like Netflix and ORF ON. Timmerer also presents provocative contributions of his own that have significantly influenced the industry. He concludes by looking at future challenges and invites the audience to join in a discussion.
Ivanti’s Patch Tuesday breakdown goes beyond patching your applications and brings you the intelligence and guidance needed to prioritize where to focus your attention first. Catch early analysis on our Ivanti blog, then join industry expert Chris Goettl for the Patch Tuesday Webinar Event. There we’ll do a deep dive into each of the bulletins and give guidance on the risks associated with the newly-identified vulnerabilities.
Programming Foundation Models with DSPy - Meetup SlidesZilliz
Prompting language models is hard, while programming language models is easy. In this talk, I will discuss the state-of-the-art framework DSPy for programming foundation models with its powerful optimizers and runtime constraint system.
HCL Notes and Domino License Cost Reduction in the World of DLAUpanagenda
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-and-domino-license-cost-reduction-in-the-world-of-dlau/
The introduction of DLAU and the CCB & CCX licensing model caused quite a stir in the HCL community. As a Notes and Domino customer, you may have faced challenges with unexpected user counts and license costs. You probably have questions on how this new licensing approach works and how to benefit from it. Most importantly, you likely have budget constraints and want to save money where possible. Don’t worry, we can help with all of this!
We’ll show you how to fix common misconfigurations that cause higher-than-expected user counts, and how to identify accounts which you can deactivate to save money. There are also frequent patterns that can cause unnecessary cost, like using a person document instead of a mail-in for shared mailboxes. We’ll provide examples and solutions for those as well. And naturally we’ll explain the new licensing model.
Join HCL Ambassador Marc Thomas in this webinar with a special guest appearance from Franz Walder. It will give you the tools and know-how to stay on top of what is going on with Domino licensing. You will be able lower your cost through an optimized configuration and keep it low going forward.
These topics will be covered
- Reducing license cost by finding and fixing misconfigurations and superfluous accounts
- How do CCB and CCX licenses really work?
- Understanding the DLAU tool and how to best utilize it
- Tips for common problem areas, like team mailboxes, functional/test users, etc
- Practical examples and best practices to implement right away
How to Get CNIC Information System with Paksim Ga.pptxdanishmna97
Pakdata Cf is a groundbreaking system designed to streamline and facilitate access to CNIC information. This innovative platform leverages advanced technology to provide users with efficient and secure access to their CNIC details.
“An Outlook of the Ongoing and Future Relationship between Blockchain Technologies and Process-aware Information Systems.” Invited talk at the joint workshop on Blockchain for Information Systems (BC4IS) and Blockchain for Trusted Data Sharing (B4TDS), co-located with with the 36th International Conference on Advanced Information Systems Engineering (CAiSE), 3 June 2024, Limassol, Cyprus.
In the rapidly evolving landscape of technologies, XML continues to play a vital role in structuring, storing, and transporting data across diverse systems. The recent advancements in artificial intelligence (AI) present new methodologies for enhancing XML development workflows, introducing efficiency, automation, and intelligent capabilities. This presentation will outline the scope and perspective of utilizing AI in XML development. The potential benefits and the possible pitfalls will be highlighted, providing a balanced view of the subject.
We will explore the capabilities of AI in understanding XML markup languages and autonomously creating structured XML content. Additionally, we will examine the capacity of AI to enrich plain text with appropriate XML markup. Practical examples and methodological guidelines will be provided to elucidate how AI can be effectively prompted to interpret and generate accurate XML markup.
Further emphasis will be placed on the role of AI in developing XSLT, or schemas such as XSD and Schematron. We will address the techniques and strategies adopted to create prompts for generating code, explaining code, or refactoring the code, and the results achieved.
The discussion will extend to how AI can be used to transform XML content. In particular, the focus will be on the use of AI XPath extension functions in XSLT, Schematron, Schematron Quick Fixes, or for XML content refactoring.
The presentation aims to deliver a comprehensive overview of AI usage in XML development, providing attendees with the necessary knowledge to make informed decisions. Whether you’re at the early stages of adopting AI or considering integrating it in advanced XML development, this presentation will cover all levels of expertise.
By highlighting the potential advantages and challenges of integrating AI with XML development tools and languages, the presentation seeks to inspire thoughtful conversation around the future of XML development. We’ll not only delve into the technical aspects of AI-powered XML development but also discuss practical implications and possible future directions.
TrustArc Webinar - 2024 Global Privacy SurveyTrustArc
How does your privacy program stack up against your peers? What challenges are privacy teams tackling and prioritizing in 2024?
In the fifth annual Global Privacy Benchmarks Survey, we asked over 1,800 global privacy professionals and business executives to share their perspectives on the current state of privacy inside and outside of their organizations. This year’s report focused on emerging areas of importance for privacy and compliance professionals, including considerations and implications of Artificial Intelligence (AI) technologies, building brand trust, and different approaches for achieving higher privacy competence scores.
See how organizational priorities and strategic approaches to data security and privacy are evolving around the globe.
This webinar will review:
- The top 10 privacy insights from the fifth annual Global Privacy Benchmarks Survey
- The top challenges for privacy leaders, practitioners, and organizations in 2024
- Key themes to consider in developing and maintaining your privacy program
Removing Uninteresting Bytes in Software FuzzingAftab Hussain
Imagine a world where software fuzzing, the process of mutating bytes in test seeds to uncover hidden and erroneous program behaviors, becomes faster and more effective. A lot depends on the initial seeds, which can significantly dictate the trajectory of a fuzzing campaign, particularly in terms of how long it takes to uncover interesting behaviour in your code. We introduce DIAR, a technique designed to speedup fuzzing campaigns by pinpointing and eliminating those uninteresting bytes in the seeds. Picture this: instead of wasting valuable resources on meaningless mutations in large, bloated seeds, DIAR removes the unnecessary bytes, streamlining the entire process.
In this work, we equipped AFL, a popular fuzzer, with DIAR and examined two critical Linux libraries -- Libxml's xmllint, a tool for parsing xml documents, and Binutil's readelf, an essential debugging and security analysis command-line tool used to display detailed information about ELF (Executable and Linkable Format). Our preliminary results show that AFL+DIAR does not only discover new paths more quickly but also achieves higher coverage overall. This work thus showcases how starting with lean and optimized seeds can lead to faster, more comprehensive fuzzing campaigns -- and DIAR helps you find such seeds.
- These are slides of the talk given at IEEE International Conference on Software Testing Verification and Validation Workshop, ICSTW 2022.
Building Production Ready Search Pipelines with Spark and MilvusZilliz
Spark is the widely used ETL tool for processing, indexing and ingesting data to serving stack for search. Milvus is the production-ready open-source vector database. In this talk we will show how to use Spark to process unstructured data to extract vector representations, and push the vectors to Milvus vector database for search serving.
Have you ever been confused by the myriad of choices offered by AWS for hosting a website or an API?
Lambda, Elastic Beanstalk, Lightsail, Amplify, S3 (and more!) can each host websites + APIs. But which one should we choose?
Which one is cheapest? Which one is fastest? Which one will scale to meet our needs?
Join me in this session as we dive into each AWS hosting service to determine which one is best for your scenario and explain why!
2. R
DIGITAL COOLANT AND BATTERY
REFRACTOMETER
MODEL NO. - ACM-SAP-2644
The Digital Battery and Coolant Refractometers, which is ideally used automotive coolant and battery
analysis are highly accurate and precise optical instruments. These digital automotive refratometers use latest
and precise optical cells. These coolant and battery refractometers use digital picture processing technique and
accurate temperature damages. Advanced microprocessor is centre of the
digital coolant and battery refractometer which analyze the
ethylene and propylene glycol and battery charge
conditions with precisions displays as three and half
figures number liquid crystal displayer. The
refractometer is simple to operate and easy to carry.
This equipment is very sturdy and have a long battery
life.
This model is designed to test the concentration of the battery fluids, antifreeze liquid and cleaning fluids. With
the indication of the percentage you may know at which temperature the fluid will be frozen. The strength of
electrolyte solution batteries can also be checked by this model. Coolant and Battery Refractometer measures
concentration of coolant mixture in engine. Our coolant and battery refractometer automatically corrects for
temperature on both types of coolant (ethylene and propylene glycol) while also measuring battery charge level
This model is ideal to ascertain the freezing point of coolants plus battery charge condition.
TECHNOLOGIES PVT. LTD.
3. R
FEATURES
Ÿ Precise optical cells and intelligent digital picture processing technique insure accurate
and stable measurement.
Ÿ Accurate temperature compensation ensures exact revision in wide range of
measuring temperature.
Ÿ Low power consumption circuit design.
Ÿ Intelligent power management and automatic switch off.
Ÿ Low Voltage alarm.
Ÿ Unit Conversion Facility Centigrade degree and Fahrenheit degree.
Ÿ Easy Four Button Operation for the complete process.
Ÿ 3 ½ Digital LCD display.
Ÿ Water Porof Circuit.
Ÿ Strong Shock Absorption Capability.
Ÿ Highly consistent and reliable.
Ÿ Easy to read LCD display.
TECHNICAL SPECIFICATIONS
MODEL
SCALE
RANGE
DIV.
ACCUR.
ACM-DRA-01C:
Propylene Glycol
32~-50°F
0.1°F
0.1°F
Ethylene Glycol
32~-50°F
0.1oF
0.1oF
Battery
1.00~1.50sg
0.01sg
0.01sg
Cleaner
14~-40°F
0.1°F
0.1°F
Propylene Glycol
0~-50°C
0.1°C
0.1°C
Ethylene Glycol
0~-50°C
0.1°C
0.1°C
Battery
1.00~1.50sg
0.01sg
0.01sg
Cleaner
0~-40°C
0.1°C
0.1°C
ACM-DRA-01F:
General Product Specifications:
Power Supply:
A battery (9V)< NEDA1604 or 6F22 or equivalent type
Operation Temperature:
0°C~40°C(32 F~104 F)
Storage Temperature:
-10°C~50°C (14 F~122 F)
Dimension:
185mm ,59mm,45mm
TECHNOLOGIES PVT. LTD.
4. R
FEATURES
Ÿ Precise optical cells and intelligent digital picture processing technique insure accurate
and stable measurement.
Ÿ Accurate temperature compensation ensures exact revision in wide range of
measuring temperature.
Ÿ Low power consumption circuit design.
Ÿ Intelligent power management and automatic switch off.
Ÿ Low Voltage alarm.
Ÿ Unit Conversion Facility Centigrade degree and Fahrenheit degree.
Ÿ Easy Four Button Operation for the complete process.
Ÿ 3 ½ Digital LCD display.
Ÿ Water Porof Circuit.
Ÿ Strong Shock Absorption Capability.
Ÿ Highly consistent and reliable.
Ÿ Easy to read LCD display.
TECHNICAL SPECIFICATIONS
MODEL
SCALE
RANGE
DIV.
ACCUR.
ACM-DRA-01C:
Propylene Glycol
32~-50°F
0.1°F
0.1°F
Ethylene Glycol
32~-50°F
0.1oF
0.1oF
Battery
1.00~1.50sg
0.01sg
0.01sg
Cleaner
14~-40°F
0.1°F
0.1°F
Propylene Glycol
0~-50°C
0.1°C
0.1°C
Ethylene Glycol
0~-50°C
0.1°C
0.1°C
Battery
1.00~1.50sg
0.01sg
0.01sg
Cleaner
0~-40°C
0.1°C
0.1°C
ACM-DRA-01F:
General Product Specifications:
Power Supply:
A battery (9V)< NEDA1604 or 6F22 or equivalent type
Operation Temperature:
0°C~40°C(32 F~104 F)
Storage Temperature:
-10°C~50°C (14 F~122 F)
Dimension:
185mm ,59mm,45mm
TECHNOLOGIES PVT. LTD.