This document describes a proposed Arduino-based human health care monitoring and control system. The system consists of three main units:
1. A sensor unit that acquires medical data like ECG, temperature, heart rate, and blood pressure from various sensors.
2. A controller unit (using an Arduino microcontroller) that compares the sensor data to normal values and can send control signals to the patient if abnormalities are detected.
3. A monitoring unit with an LCD display to show the sensor readings and system status.
The system is intended to continuously monitor vital health parameters and provide treatment or alerts if issues arise. This could help elderly or vulnerable people receive medical help and oversight without needing to be in a clinical setting
ICU remains for Intensive Care Unit, a place in the recuperating office where wiped out patients are checked eagerly. Commonly, the patient-staff extent is low and the LIFE-SAVING EQUIPMENT used is outstandingly bleeding edge Generally ICU is a healing facility for course of action of genuine nursing and remedial consideration of essentially wiped out patients, depicted by high bore and measure of unending nursing and restorative supervision and by use of cutting edge checking and resuscitative equipment The patients in the ICU require a predictable seeing of their Temperature and pulse circulatory strain. This undertaking is a working model, which wires sensors to evaluate imperative parameters specifically the Temperature, Respiratory temperature and Heart Beat. The sensors are interfaced to PC, with the objective that the condition of a patient can be explored by masters in any bit of the center wherever they are. At whatever point there is a variety from the standard felt by the patient, the particular patient will give an alert movement, by which the pro can race to the patient. Despite when the patient is in a careless condition, each one of the parameters will be identified and pro will be admonished, thusly it diminishes master's remaining task at hand and besides gives more correct results .Our endeavor is a working model which wires sensors to measure each one of these parameters like body temperature, Respiratory Temp and Heart Beat rate and trade it to the PC, with the objective that the patient condition can be examined to by authorities in any bit of the recuperating focus wherever they are. In this way it decreases experts work stack and besides gives more exact results, wherever there is a variety from the standard felt by the patient, we have in like manner combined saline watching system which gives an alert when the saline container going to cleanse.
An enhanced lossless compression with cryptography hybrid mechanism for ECG b...IJECEIAES
Due to their use in daily life situation, demand for remote health applications and e-health monitoring equipment is growing quickly. In this phase, for fast diagnosis and therapy, information can be transferred from the patient to the distant clinic. Nowadays, the most chronic disease is cardiovascular diseases (CVDs). However, the storage and transmission of the ECG signal, consumes more energy, bandwidth and data security which is faced many challenges. Hence, in this work, we present a combined approach for ECG data compression and cryptography. The compression is performed using adaptive Huffman encoding and encrypting is done using AES (CBC) scheme with a 256-bit key. To increase the security, we include DiffieHellman Key exchange to authenticate the receiver, RSA key generation for encrypting and decrypting the data. Experimental results show that the proposed approach achieves better performance in terms of compression and encryption on MIT-BIH ECG dataset.
AMA-IEEE Presentation : a low-power and reliable body area network platform f...fabienmasse
The document describes a low-power and reliable body area network (BAN) platform for rehabilitation applications. The platform uses ultra-low power sensors and optimized wireless communication to allow for continuous monitoring over multiple days with high data reliability. Preliminary evaluations show the platform is comfortable, easy to use, and provides multi-modal sensor data for in-patient and out-patient rehabilitation assessments. Future work will explore improving reliability further and clinical trials using the platform.
Implementation of ecg signal acquisition and transmission through bluetooth t...eSAT Publishing House
This document discusses the implementation of acquiring an ECG signal from a human body using electrodes and transmitting the signal wirelessly using Bluetooth technology. The system involves three nodes: an ECG acquisition node that collects the analog ECG signal, a wireless communication node that converts the analog signal to digital and transmits it via Bluetooth, and a monitoring node that receives the signal via Bluetooth and filters it for monitoring on a display. The Bluetooth transmission allows real-time ECG monitoring without the patient needing to stay in a hospital, which can save costs and expand access to healthcare.
ECG analysis in the cloud allows for remote monitoring of patients' heartbeats without visiting the hospital. Sensors attached to patients measure their ECG and transmit the data via Bluetooth to mobile devices and the cloud for analysis. This analysis is done as a cloud service across infrastructure, platform, and software layers. The cloud provides elastic resources and near real-time analysis, allowing doctors to monitor more patients without large local computing infrastructures.
The document discusses the application of computing in yoga science. It describes the University of Petroleum and Energy Studies (UPES) in Dehradun, India, which offers degrees in engineering, management, law, design, health sciences, and computer science. The School of Computer Science focuses on areas like cloud computing, AI, cyber security, and blockchain. Research clusters at UPES apply machine learning and data science to areas like healthcare, smart cities, and sustainability. The document provides examples of research projects using sensors and algorithms to analyze bio signals from ECG, EEG, and EMG for applications in yoga and meditation.
A more secure and reliable protocol for wireless patient monitoring systemeSAT Publishing House
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
This document describes a proposed Arduino-based human health care monitoring and control system. The system consists of three main units:
1. A sensor unit that acquires medical data like ECG, temperature, heart rate, and blood pressure from various sensors.
2. A controller unit (using an Arduino microcontroller) that compares the sensor data to normal values and can send control signals to the patient if abnormalities are detected.
3. A monitoring unit with an LCD display to show the sensor readings and system status.
The system is intended to continuously monitor vital health parameters and provide treatment or alerts if issues arise. This could help elderly or vulnerable people receive medical help and oversight without needing to be in a clinical setting
ICU remains for Intensive Care Unit, a place in the recuperating office where wiped out patients are checked eagerly. Commonly, the patient-staff extent is low and the LIFE-SAVING EQUIPMENT used is outstandingly bleeding edge Generally ICU is a healing facility for course of action of genuine nursing and remedial consideration of essentially wiped out patients, depicted by high bore and measure of unending nursing and restorative supervision and by use of cutting edge checking and resuscitative equipment The patients in the ICU require a predictable seeing of their Temperature and pulse circulatory strain. This undertaking is a working model, which wires sensors to evaluate imperative parameters specifically the Temperature, Respiratory temperature and Heart Beat. The sensors are interfaced to PC, with the objective that the condition of a patient can be explored by masters in any bit of the center wherever they are. At whatever point there is a variety from the standard felt by the patient, the particular patient will give an alert movement, by which the pro can race to the patient. Despite when the patient is in a careless condition, each one of the parameters will be identified and pro will be admonished, thusly it diminishes master's remaining task at hand and besides gives more correct results .Our endeavor is a working model which wires sensors to measure each one of these parameters like body temperature, Respiratory Temp and Heart Beat rate and trade it to the PC, with the objective that the patient condition can be examined to by authorities in any bit of the recuperating focus wherever they are. In this way it decreases experts work stack and besides gives more exact results, wherever there is a variety from the standard felt by the patient, we have in like manner combined saline watching system which gives an alert when the saline container going to cleanse.
An enhanced lossless compression with cryptography hybrid mechanism for ECG b...IJECEIAES
Due to their use in daily life situation, demand for remote health applications and e-health monitoring equipment is growing quickly. In this phase, for fast diagnosis and therapy, information can be transferred from the patient to the distant clinic. Nowadays, the most chronic disease is cardiovascular diseases (CVDs). However, the storage and transmission of the ECG signal, consumes more energy, bandwidth and data security which is faced many challenges. Hence, in this work, we present a combined approach for ECG data compression and cryptography. The compression is performed using adaptive Huffman encoding and encrypting is done using AES (CBC) scheme with a 256-bit key. To increase the security, we include DiffieHellman Key exchange to authenticate the receiver, RSA key generation for encrypting and decrypting the data. Experimental results show that the proposed approach achieves better performance in terms of compression and encryption on MIT-BIH ECG dataset.
AMA-IEEE Presentation : a low-power and reliable body area network platform f...fabienmasse
The document describes a low-power and reliable body area network (BAN) platform for rehabilitation applications. The platform uses ultra-low power sensors and optimized wireless communication to allow for continuous monitoring over multiple days with high data reliability. Preliminary evaluations show the platform is comfortable, easy to use, and provides multi-modal sensor data for in-patient and out-patient rehabilitation assessments. Future work will explore improving reliability further and clinical trials using the platform.
Implementation of ecg signal acquisition and transmission through bluetooth t...eSAT Publishing House
This document discusses the implementation of acquiring an ECG signal from a human body using electrodes and transmitting the signal wirelessly using Bluetooth technology. The system involves three nodes: an ECG acquisition node that collects the analog ECG signal, a wireless communication node that converts the analog signal to digital and transmits it via Bluetooth, and a monitoring node that receives the signal via Bluetooth and filters it for monitoring on a display. The Bluetooth transmission allows real-time ECG monitoring without the patient needing to stay in a hospital, which can save costs and expand access to healthcare.
ECG analysis in the cloud allows for remote monitoring of patients' heartbeats without visiting the hospital. Sensors attached to patients measure their ECG and transmit the data via Bluetooth to mobile devices and the cloud for analysis. This analysis is done as a cloud service across infrastructure, platform, and software layers. The cloud provides elastic resources and near real-time analysis, allowing doctors to monitor more patients without large local computing infrastructures.
The document discusses the application of computing in yoga science. It describes the University of Petroleum and Energy Studies (UPES) in Dehradun, India, which offers degrees in engineering, management, law, design, health sciences, and computer science. The School of Computer Science focuses on areas like cloud computing, AI, cyber security, and blockchain. Research clusters at UPES apply machine learning and data science to areas like healthcare, smart cities, and sustainability. The document provides examples of research projects using sensors and algorithms to analyze bio signals from ECG, EEG, and EMG for applications in yoga and meditation.
A more secure and reliable protocol for wireless patient monitoring systemeSAT Publishing House
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
Computers play an important role in the medical field by managing patient records, billing systems, medical imaging, and more. Health informatics applies information science to healthcare by using computers to store and analyze patient data to aid diagnosis and treatment. Computers are used for tasks like maintaining electronic medical records, performing scans like MRI and CT, assisting with surgery, and monitoring devices like pacemakers. While computers provide benefits like improved record keeping and analysis, their use also presents challenges such as high costs and need to ensure security of electronic patient information.
IRJET- A Real Time, Automated, Medical Emergency Service for Informing th...IRJET Journal
This document discusses a proposed mobile application for providing automated medical emergency services. The application would monitor patients' vital signs to detect medical emergencies. If an emergency is detected, the application would alert the closest medical rescuer and provide patient details to allow for rapid response. The application would also allow patients to communicate with doctors and receive prescriptions. The proposal aims to reduce deaths from lack of timely medical attention by expediting emergency response.
The document discusses applying computing technologies to yoga science. It describes the University of Petroleum and Energy Studies (UPES) in Dehradun, India, which has over 9,000 students across six schools including the School of Computer Science. The School of Computer Science focuses on areas like AI, machine learning, cyber security, and more. It also conducts research in clusters like green computing, machine intelligence, and secure computing. Some example research projects apply technologies like machine learning and IoT to areas like ECG monitoring, computer vision, and assistive devices. The document outlines how data science and associated technologies could support yoga science in areas like signal analysis, classification, and neurofeedback.
This document summarizes a review paper on Wireless Body Area Networks (WBANs) by Fentahun Yersie. It discusses that WBANs consist of small intelligent devices attached to or implanted in the body that wirelessly communicate health and physiological data. It describes the two main types of devices as sensors that measure parameters like heartbeat and temperature, and actuators that take actions based on sensor data. The document outlines the typical three-level architecture of WBANs and common applications like remote health monitoring. It also discusses the key requirements for WBAN MAC protocols including reducing energy consumption through efficient handling of collision, overhearing, idle listening while supporting communication across multiple frequency bands.
This document provides an overview of a research report on the use of distributed imaging systems in the health sector. The report examines how digital imaging systems can create optimal access to patient information for fast treatment by storing, manipulating, and allowing access to images without physical films. It analyzes centralized and grid-based distributed systems used in medical facilities globally. The main conclusion is that integrated digital imaging systems like CT, MRI, PACS, and DICOM databases eliminate film radiography and enable easy radiology through computerized imaging. Future work proposes a fully distributed distributed DICOM data warehouse for hardware and software support.
Terrance Leonard is seeking a position in radiology with over 17 years of experience in healthcare. He has held positions including Lead Radiology Tech, CT Tech, Assistant Radiology Director, Interim Radiology Director, and PACS Administrator. He has an Associate in Science Degree from Central Alabama Community College and is certified in radiology from Baptist Medical Center School of Radiology. His resume details his experience at various hospitals and medical centers over the past 17 years performing radiology procedures including CT, MRI, x-ray, and serving in management roles.
IRJET- Review on: A Wireless IoT System for Gait Detection in Stroke PatientIRJET Journal
This document summarizes a proposed wireless IoT system for gait detection in stroke patients. The system would use sensors embedded in a smart shoe to discreetly monitor a patient's insole pressure and acceleration during walking. The data collected from the shoe sensors and a smartphone's built-in sensors would be used to detect any abnormal or cautious gait patterns that could predict risk of falling. The system aims to warn patients about risky gaits and potentially prevent injuries. It discusses how IoT and wireless communication could help create a portable system to continuously monitor patients' gaits outside of a clinical setting.
The document outlines the program for the HCMDSS/MDPnP Workshop held on April 11, 2011. It included three sessions over the day comprising keynote speeches, invited talks, and presentations on a variety of topics. Some of the topics discussed included cognitive complexity in intensive care patient monitoring, certifying concurrent state tables in surgical robotics, regulatory issues for integrated clinical environments, model-based code generation for intensive care applications, medical device plug-and-play architectures, hybrid systems model checking, semantic alarms in medical device networks, and architecture-based static analysis of medical device software. The workshop concluded with a panel discussion and ended at 5pm.
communication's application in medical fieldSharanjit Kaur
ICT plays a significant role in the medical field through communication tools, medical equipment, research, and patient records. Wireless medical devices allow for remote monitoring of patients' vital signs and improved mobility. Technologies like Bluetooth and WiFi enable wireless transmission of physiological data from sensors on the patient's body to monitoring stations. Long range medical telemetry uses licensed spectrum to transmit patient data over longer distances, improving access to healthcare. The integration of ICT has changed medicine by enhancing communication, learning, and access to information.
This document summarizes a research paper that proposes a new e-healthcare information system based on an Android application. The paper discusses limitations of existing systems including errors, lack of access to patient information, and delays. It proposes a new system using Android mobile devices, wearable sensors to monitor biometrics, machine-to-machine communication, and a service-oriented architecture. This would allow real-time sharing of patient data between doctors and patients regardless of location. It also discusses using evolutionary computing algorithms and multi-agent frameworks to optimize medical data quality and analysis in distributed environments. The proposed system aims to improve diagnosis, treatment decisions and access to healthcare.
Title: A Self-powered IoT SoC Platform for Wearable Health Care Mohammed Ismail, Professor and Chair of ECE at Wayne State University, Detroit,
Fellow IEEE, Adjunct professor with KUSTAR, Abu Dhabi, UAE Abstract: This talk will focus on an IoT Systems-on-Chip (SoCs) as part of research work which targets applications in self-powered chip sets for use in public health, ambient intelligence, safety and security and IoT.
ICM 2018
IRJET- Hiding Sensitive Medical Data using EncryptionIRJET Journal
This document summarizes a research paper about securely hiding sensitive medical data using encryption. The paper proposes a system that distributes a patient's data across multiple encrypted data servers. It uses Paillier cryptosystems to allow statistical analysis of the encrypted patient data without compromising privacy. The system includes wireless medical sensors that monitor patients and transmit encrypted data to a database. It uses an access control system and statistical analysis protocols that employ Paillier encryption to allow authorized users like doctors to access and analyze the encrypted patient data without revealing its contents. The goal is to protect sensitive medical information from privacy breaches while still enabling useful analysis of aggregated patient data.
Restoration of the Connectome as a Measure for Brain Surgery OutcomeBiomax Informatics AG
NICAR is a novel, unique and cost-effective solution for everyone working with brain data, who wishes to gain a deeper insight into the world of Connectomics.
Backpropagation Neural Network Modeling for Fault Location in Transmission Li...ijeei-iaes
In this topic research was provided about the backpropagation neural network to detect fault location in transmission line 150 kV between substation to substation. The distance relay is one of the good protective device and safety devices that often used on transmission line 150 kV. The disturbances in power system are used distance relay protection equipment in the transmission line. However, it needs more increasing large load and network systems are increasing complex. The protection system use the digital control, in order to avoid the error calculation of the distance relay impedance settings and spent time will be more efficient. Then backpropagation neural network is a computational model that uses the training process that can be used to solve the problem of work limitations of distance protection relays. The backpropagation neural network does not have limitations cause of the impedance range setting. If the output gives the wrong result, so the correct of the weights can be minimized and also the response of galat, the backpropagation neural network is expected to be closer to the correct value. In the end, backpropagation neural network modeling is expected to detect the fault location and identify operational output current circuit breaker was tripped it. The tests are performance with interconnected system 150 kV of Riau Region.
This document summarizes a student project report on a wireless patient health monitoring system using ARM, wireless sensor networks, and Zigbee. The system aims to automatically monitor patient vital signs such as pulse rate, ECG, temperature, and oxygen saturation and transmit the data to a central computer via Zigbee for real-time access by medical staff and authorized relatives. The report includes sections on introduction and background, literature review, system design, implementation, results and discussion, and conclusions and future work.
In today's era of advanced technology, Artificial Intelligence has been proven as a boon for various fields. Utilization of AI in power system is the need of upcoming future.
Provisioning Quality of Service of Wireless Telemedicine for E-health Services Mustafa Algaet
This document discusses provisioning quality of service (QoS) for wireless telemedicine and e-health services. It proposes developing a mobile telemedicine system using existing infrastructure to expand telemedicine's reach. The system would use off-the-shelf hardware, standard cellular networks, and novel technologies to intelligently encode and distribute video over available wireless networks and degrade gracefully with disruptions. It reviews existing QoS solutions and proposes new methods to improve QoS for wireless telemedicine, to be tested in real networks.
IRJET- Enhancing Data Security in IoT Healthcare Services using Fog ComputingIRJET Journal
This document discusses enhancing data security in IoT healthcare services using fog computing. It proposes a system that uses sensors to detect heart rate and pulse to predict heart disease. The data is encrypted using AES encryption and stored in a fog node for security before being sent to the cloud. This reduces latency and improves security, accuracy and consistency compared to traditional cloud-only architectures. The system aims to predict heart disease using random forest classification and secure data using AES encryption in the fog node to enhance healthcare data security.
Telemedicine uses telecommunication technologies to deliver healthcare services from a distance by transmitting medical information through still images, audio, video calls and emails. It has advantages like providing care to isolated areas, enabling specialists to consult across borders, and educating doctors, while helping people avoid travel and continue working. However, not everyone has access to the needed technology, specialists require training, and language barriers can be a problem.
Data logging refers to collecting data over time using sensors. Sensors measure a property and send an analog signal to be converted into digital data by an analog-to-digital converter (ADC) for computer processing. Data logging systems are used for scientific experiments, weather stations, and environmental monitoring to gather data regularly about factors like temperature, rainfall, pollution levels, and more. The sensors take measurements that are converted and sent to a data logger for storage and later transmission to a computer for analysis and presentation.
This document provides information about how traditional businesses use information technology. It discusses how banks use systems like ATMs, EFTPOS, and online banking. It also describes how hotels, supermarkets, and travel agencies employ IT. The document notes that cars now contain many computer systems for safety, navigation, and convenience. It provides details on online banking features and how ATMs are used to withdraw money, check balances, and make deposits.
Computers play an important role in the medical field by managing patient records, billing systems, medical imaging, and more. Health informatics applies information science to healthcare by using computers to store and analyze patient data to aid diagnosis and treatment. Computers are used for tasks like maintaining electronic medical records, performing scans like MRI and CT, assisting with surgery, and monitoring devices like pacemakers. While computers provide benefits like improved record keeping and analysis, their use also presents challenges such as high costs and need to ensure security of electronic patient information.
IRJET- A Real Time, Automated, Medical Emergency Service for Informing th...IRJET Journal
This document discusses a proposed mobile application for providing automated medical emergency services. The application would monitor patients' vital signs to detect medical emergencies. If an emergency is detected, the application would alert the closest medical rescuer and provide patient details to allow for rapid response. The application would also allow patients to communicate with doctors and receive prescriptions. The proposal aims to reduce deaths from lack of timely medical attention by expediting emergency response.
The document discusses applying computing technologies to yoga science. It describes the University of Petroleum and Energy Studies (UPES) in Dehradun, India, which has over 9,000 students across six schools including the School of Computer Science. The School of Computer Science focuses on areas like AI, machine learning, cyber security, and more. It also conducts research in clusters like green computing, machine intelligence, and secure computing. Some example research projects apply technologies like machine learning and IoT to areas like ECG monitoring, computer vision, and assistive devices. The document outlines how data science and associated technologies could support yoga science in areas like signal analysis, classification, and neurofeedback.
This document summarizes a review paper on Wireless Body Area Networks (WBANs) by Fentahun Yersie. It discusses that WBANs consist of small intelligent devices attached to or implanted in the body that wirelessly communicate health and physiological data. It describes the two main types of devices as sensors that measure parameters like heartbeat and temperature, and actuators that take actions based on sensor data. The document outlines the typical three-level architecture of WBANs and common applications like remote health monitoring. It also discusses the key requirements for WBAN MAC protocols including reducing energy consumption through efficient handling of collision, overhearing, idle listening while supporting communication across multiple frequency bands.
This document provides an overview of a research report on the use of distributed imaging systems in the health sector. The report examines how digital imaging systems can create optimal access to patient information for fast treatment by storing, manipulating, and allowing access to images without physical films. It analyzes centralized and grid-based distributed systems used in medical facilities globally. The main conclusion is that integrated digital imaging systems like CT, MRI, PACS, and DICOM databases eliminate film radiography and enable easy radiology through computerized imaging. Future work proposes a fully distributed distributed DICOM data warehouse for hardware and software support.
Terrance Leonard is seeking a position in radiology with over 17 years of experience in healthcare. He has held positions including Lead Radiology Tech, CT Tech, Assistant Radiology Director, Interim Radiology Director, and PACS Administrator. He has an Associate in Science Degree from Central Alabama Community College and is certified in radiology from Baptist Medical Center School of Radiology. His resume details his experience at various hospitals and medical centers over the past 17 years performing radiology procedures including CT, MRI, x-ray, and serving in management roles.
IRJET- Review on: A Wireless IoT System for Gait Detection in Stroke PatientIRJET Journal
This document summarizes a proposed wireless IoT system for gait detection in stroke patients. The system would use sensors embedded in a smart shoe to discreetly monitor a patient's insole pressure and acceleration during walking. The data collected from the shoe sensors and a smartphone's built-in sensors would be used to detect any abnormal or cautious gait patterns that could predict risk of falling. The system aims to warn patients about risky gaits and potentially prevent injuries. It discusses how IoT and wireless communication could help create a portable system to continuously monitor patients' gaits outside of a clinical setting.
The document outlines the program for the HCMDSS/MDPnP Workshop held on April 11, 2011. It included three sessions over the day comprising keynote speeches, invited talks, and presentations on a variety of topics. Some of the topics discussed included cognitive complexity in intensive care patient monitoring, certifying concurrent state tables in surgical robotics, regulatory issues for integrated clinical environments, model-based code generation for intensive care applications, medical device plug-and-play architectures, hybrid systems model checking, semantic alarms in medical device networks, and architecture-based static analysis of medical device software. The workshop concluded with a panel discussion and ended at 5pm.
communication's application in medical fieldSharanjit Kaur
ICT plays a significant role in the medical field through communication tools, medical equipment, research, and patient records. Wireless medical devices allow for remote monitoring of patients' vital signs and improved mobility. Technologies like Bluetooth and WiFi enable wireless transmission of physiological data from sensors on the patient's body to monitoring stations. Long range medical telemetry uses licensed spectrum to transmit patient data over longer distances, improving access to healthcare. The integration of ICT has changed medicine by enhancing communication, learning, and access to information.
This document summarizes a research paper that proposes a new e-healthcare information system based on an Android application. The paper discusses limitations of existing systems including errors, lack of access to patient information, and delays. It proposes a new system using Android mobile devices, wearable sensors to monitor biometrics, machine-to-machine communication, and a service-oriented architecture. This would allow real-time sharing of patient data between doctors and patients regardless of location. It also discusses using evolutionary computing algorithms and multi-agent frameworks to optimize medical data quality and analysis in distributed environments. The proposed system aims to improve diagnosis, treatment decisions and access to healthcare.
Title: A Self-powered IoT SoC Platform for Wearable Health Care Mohammed Ismail, Professor and Chair of ECE at Wayne State University, Detroit,
Fellow IEEE, Adjunct professor with KUSTAR, Abu Dhabi, UAE Abstract: This talk will focus on an IoT Systems-on-Chip (SoCs) as part of research work which targets applications in self-powered chip sets for use in public health, ambient intelligence, safety and security and IoT.
ICM 2018
IRJET- Hiding Sensitive Medical Data using EncryptionIRJET Journal
This document summarizes a research paper about securely hiding sensitive medical data using encryption. The paper proposes a system that distributes a patient's data across multiple encrypted data servers. It uses Paillier cryptosystems to allow statistical analysis of the encrypted patient data without compromising privacy. The system includes wireless medical sensors that monitor patients and transmit encrypted data to a database. It uses an access control system and statistical analysis protocols that employ Paillier encryption to allow authorized users like doctors to access and analyze the encrypted patient data without revealing its contents. The goal is to protect sensitive medical information from privacy breaches while still enabling useful analysis of aggregated patient data.
Restoration of the Connectome as a Measure for Brain Surgery OutcomeBiomax Informatics AG
NICAR is a novel, unique and cost-effective solution for everyone working with brain data, who wishes to gain a deeper insight into the world of Connectomics.
Backpropagation Neural Network Modeling for Fault Location in Transmission Li...ijeei-iaes
In this topic research was provided about the backpropagation neural network to detect fault location in transmission line 150 kV between substation to substation. The distance relay is one of the good protective device and safety devices that often used on transmission line 150 kV. The disturbances in power system are used distance relay protection equipment in the transmission line. However, it needs more increasing large load and network systems are increasing complex. The protection system use the digital control, in order to avoid the error calculation of the distance relay impedance settings and spent time will be more efficient. Then backpropagation neural network is a computational model that uses the training process that can be used to solve the problem of work limitations of distance protection relays. The backpropagation neural network does not have limitations cause of the impedance range setting. If the output gives the wrong result, so the correct of the weights can be minimized and also the response of galat, the backpropagation neural network is expected to be closer to the correct value. In the end, backpropagation neural network modeling is expected to detect the fault location and identify operational output current circuit breaker was tripped it. The tests are performance with interconnected system 150 kV of Riau Region.
This document summarizes a student project report on a wireless patient health monitoring system using ARM, wireless sensor networks, and Zigbee. The system aims to automatically monitor patient vital signs such as pulse rate, ECG, temperature, and oxygen saturation and transmit the data to a central computer via Zigbee for real-time access by medical staff and authorized relatives. The report includes sections on introduction and background, literature review, system design, implementation, results and discussion, and conclusions and future work.
In today's era of advanced technology, Artificial Intelligence has been proven as a boon for various fields. Utilization of AI in power system is the need of upcoming future.
Provisioning Quality of Service of Wireless Telemedicine for E-health Services Mustafa Algaet
This document discusses provisioning quality of service (QoS) for wireless telemedicine and e-health services. It proposes developing a mobile telemedicine system using existing infrastructure to expand telemedicine's reach. The system would use off-the-shelf hardware, standard cellular networks, and novel technologies to intelligently encode and distribute video over available wireless networks and degrade gracefully with disruptions. It reviews existing QoS solutions and proposes new methods to improve QoS for wireless telemedicine, to be tested in real networks.
IRJET- Enhancing Data Security in IoT Healthcare Services using Fog ComputingIRJET Journal
This document discusses enhancing data security in IoT healthcare services using fog computing. It proposes a system that uses sensors to detect heart rate and pulse to predict heart disease. The data is encrypted using AES encryption and stored in a fog node for security before being sent to the cloud. This reduces latency and improves security, accuracy and consistency compared to traditional cloud-only architectures. The system aims to predict heart disease using random forest classification and secure data using AES encryption in the fog node to enhance healthcare data security.
Telemedicine uses telecommunication technologies to deliver healthcare services from a distance by transmitting medical information through still images, audio, video calls and emails. It has advantages like providing care to isolated areas, enabling specialists to consult across borders, and educating doctors, while helping people avoid travel and continue working. However, not everyone has access to the needed technology, specialists require training, and language barriers can be a problem.
Data logging refers to collecting data over time using sensors. Sensors measure a property and send an analog signal to be converted into digital data by an analog-to-digital converter (ADC) for computer processing. Data logging systems are used for scientific experiments, weather stations, and environmental monitoring to gather data regularly about factors like temperature, rainfall, pollution levels, and more. The sensors take measurements that are converted and sent to a data logger for storage and later transmission to a computer for analysis and presentation.
This document provides information about how traditional businesses use information technology. It discusses how banks use systems like ATMs, EFTPOS, and online banking. It also describes how hotels, supermarkets, and travel agencies employ IT. The document notes that cars now contain many computer systems for safety, navigation, and convenience. It provides details on online banking features and how ATMs are used to withdraw money, check balances, and make deposits.
Medical information, administration, marketing and salesstjulians school
This document provides information on medical advice, e-prescriptions, and the benefits of electronic prescriptions. It lists websites and apps for getting medical advice online as well as websites demonstrating how e-prescriptions work and their advantages over traditional paper prescriptions, such as being fast, legible, and allowing access to patients' medical histories.
Electronic health records (EHRs) systematically collect electronic health information about individual patients or populations to improve quality of care, reduce costs, and promote evidence-based medicine. While EHRs allow for improved record keeping and mobility, their implementation faces challenges like transferring old records, privacy concerns, startup costs, and additional training needs. Personal health records initiated and maintained by individuals aim to provide a complete health summary by gathering data from various sources online.
Cyberwarfare involves penetrating another nation's computers or networks to cause damage or disruption, and can include web vandalism, propaganda spreading, data gathering, equipment disruption, and attacking critical infrastructure like power systems. Smart weapons rely on guidance technologies like laser targeting, millimeter-wave radar, and satellite GPS to precisely hit targets in various weather conditions with less support needed. Unmanned aerial vehicles like the Predator are sophisticated systems that use many sensors and require a ground control station and communication suite to be fully operational. Virtual warfare through combat training simulations is also discussed.
Computer models and simulations are used to predict how systems will behave without having to create physical systems. They use mathematical formulas and past data to mimic real-life situations. While not perfectly accurate, models allow testing of systems like cars, weather patterns, bridges and businesses in a safe, cost-effective manner. Examples given include using models to design safer cars, forecast weather, test bridge designs, predict business profits, and train pilots via realistic flight simulators.
The document provides instruction on creating a project using the My eCoach Project Builder. It outlines a 3-step process: 1) Conceptualize the project by identifying a passion, problem, or topic to clarify; 2) Identify the necessary content for learners; 3) Customize the project template by selecting a theme, adding images, interactivity, and external links. Step 3 further explains how to select a theme, add a header image, and submit the project to the eLibrary for sharing. Interactive tools like quizzes and surveys can be added using the My eCoach resources, which allow for customization and reporting of results.
The document discusses exploring the concept of systematically differentiating between dark and light leaders by examining whether a criminal personality profile is possible. It summarizes research on criminal profiling and syndromes associated with criminal behavior. The document proposes analyzing case studies of dark and light leaders using assessment tools to determine if there are patterns suggesting systematic personality differences between the two groups. Specifically, it will use adapted versions of Hare's Psychopathy Checklist, DSM-IV criteria for antisocial personality disorder, and an emotional intelligence scale to rate leaders and identify psychopathic traits or a lack of emotional intelligence.
This document provides a summary and table of contents for "The Amazing Web 2.0 Projects Book" edited by Terry Freedman. The book contains over 100 case studies of educational projects from around the world that utilize various Web 2.0 technologies like blogs, wikis, social networking, and more. It is organized into 5 sections covering different age groups from primary/elementary school through adult education. The case studies provide details about how specific classes and schools have integrated technologies to enhance teaching and learning.
Here are the steps to solve this compound interest problem:
* Principal (P) = $1000
* Annual interest rate (r) = 9% = 0.09
* Number of interest periods per year (n) = 12 (monthly)
* Interest is compounded monthly
* Calculate amount after 5 years, 10 years, and 15 years using the compound interest formula:
5 years: A = 1000(1 + 0.09/12)^(12*5) = $1581.53
10 years: A = 1000(1 + 0.09/12)^(12*10) = $2501.04
15 years: A = 1000(1 + 0.09/12
Å få inn vitenskapelige tidsskriftsartikler til vitenarkivene kan være krevende. Hvordan kan vi stimulere forskerne til å avlevere sine publikasjoner? Går det lettere med OA-policy og insentivordning på plass?
The document provides examples of composition of functions. It gives the functions f(x) = 4 - x^2 and g(x) = sqrt(x) and calculates their composition, as well as finding the domain of each case. It then gives another example with the functions f(x) = sqrt(x) and g(x) = x^2 - 4, and again calculates their composition and domains. It provides exercises to calculate additional compositions of functions and their domains.
METRO Workshop: DIY Usability & User ExperienceLisa Chow
This document discusses a presentation on DIY usability and user experience for libraries. The presentation aimed to share experiences with usability, provide an understanding of people-centered design principles, outline the importance of usability for libraries, and create a mini usability study. The presenters were Lisa Chow and Sandra Sajonas, information professionals who have used people-centered methods on various library projects. They discussed defining usability with five principles, the usability process as iterative and flexible, and provided examples of usability studies they conducted in libraries. The presentation provided templates for planning a usability study and tools for visualizing collected data.
En 2008, realicé un viaje por los Estados Unidos. Visitè varias ciudades importantes como Nueva York, Chicago y Los Angeles. Aprendí mucho sobre la cultura y la historia de diferentes regiones del país.
This presentation describes coordination of federal biometric and identity management activities, and was given at the 2007 Biometric Consortium Conference.
This document summarizes research on the cultural construction of age identity through media depictions of older consumers. It identifies several discourses around aging, including: the anti-senior discourse; the radical discourse depicting older individuals as active and rock-n-rolling; the eternal youth discourse emphasizing looking and feeling young; the hedonistic discourse of wealthy older consumers; and the soulful discourse emphasizing wisdom and experience over physical appearance. The researcher analyzes these discourses by exploring themes, symbols, subject positions, and antagonisms toward alternative views of aging. The goal is to understand how media representations shape cultural understandings and identities regarding the aging process.
MHealth or Mobile Health is an emerging and an innovative of medication in India, by doctors can communicate and treat their patients very conveniently even from far distances.
A Body Area Network is formally defined by IEEE 802.15 as, "a communication
standard optimized for low power devices and operation on, in or around the human body
(but not limited to humans) to serve a variety of applications including medical, consumer
electronics / personal entertainment and other" [IEEE 802.15]. In more common terms, a
Body Area Network is a system of devices in close proximity to a person’s body that
cooperate for the benefit of the user.
This presentation was presented by Nawal KIshore Kundan under the guidance of Ms. Ancy Zacharia.
CompTIA exam study guide presentations by instructor Brian Ferrill, PACE-IT (Progressive, Accelerated Certifications for Employment in Information Technology)
"Funded by the Department of Labor, Employment and Training Administration, Grant #TC-23745-12-60-A-53"
Learn more about the PACE-IT Online program: www.edcc.edu/pace-it
Security Method in Data Acquisition Wireless Sensor Network Dharmendrasingh417
This document discusses security methods for data acquisition in wireless sensor networks. It first introduces wireless sensor networks and some of their challenges, including security issues. It then outlines the objectives of exploring routing algorithms and an intrusion prevention system to authenticate nodes and ensure data integrity and confidentiality. The document describes the proposed system of sensor nodes communicating with router pairs running dual routing algorithms and an intrusion prevention system to filter unauthorized data packets. It presents some experimental results on security and power consumption and concludes that the existing system focuses on self-powered routing but more research is still needed on secure and energy-efficient solutions.
The International Journal of Engineering and Science (The IJES)theijes
The International Journal of Engineering & Science is aimed at providing a platform for researchers, engineers, scientists, or educators to publish their original research results, to exchange new ideas, to disseminate information in innovative designs, engineering experiences and technological skills. It is also the Journal's objective to promote engineering and technology education. All papers submitted to the Journal will be blind peer-reviewed. Only original articles will be published.
This document provides an overview of wireless body area networks (WBANs), including a definition, description of components, architecture, technologies used, advantages, applications, challenges, and security considerations. A WBAN allows integration of low-power sensor nodes on or around the human body to monitor biological functions. It has a 3-tier architecture consisting of body sensors, a personal server, and a medical server. Technologies used include ZigBee, Bluetooth Low Energy, and IEEE 802.15.4. WBANs enable various healthcare and fitness applications but also face challenges related to interference, integration, and security of medical data.
The document describes a voice-based alert system for blind people using ultrasonic sensors. The system is designed by a team with T. Srinivas Reddy as the guide. It uses an LPC1343 cortex M3 microcontroller connected to ultrasonic sensors and a buzzer. The sensors detect obstacles and the microcontroller triggers voice alerts or buzzer sounds. The system aims to help blind people navigate safely in a low-cost and low-power design.
Wireless sensor networks and wearable devices are being used increasingly in medical applications to continuously monitor patients' vital signs. Sensors can measure body parameters like temperature, blood pressure, heart rate, blood sugar and more. These wireless medical sensors communicate information to devices on or near the body. They must be unobtrusive, secure, interoperable and provide reliable communication. Common examples include blood glucose sensors that use enzymes to detect glucose levels electrochemically. Advances in miniaturization and wireless connectivity are helping to expand medical monitoring through small, wearable biosensors.
ANALYSIS OF VARIOUS PROTOCOLS IN WIRELESS BODY AREA NETWORKS (WBAN) IAEME Publication
A Body Area Network is a system of computing devices located in close proximityto the human body which coordinates and cooperates for the benefit of the user. Body
Area Networks have evolved out of sensor network technology and biomedicalengineering. In this paper we discuss various aspects of Body Area Networks,introduction section deals with various concepts associated with computer networks
and some supporting technologies of Wireless Body Area Networks (WBANs). Section
2 deals with the various definitions of Body Area Networks(BANs) followed by the
types of BAN in section 3 and system architecture in section 4. Section 5 gives the
draft guidelines by IEEE 802.15.6 for a communicationsstandard for BAN, the next
two sections list out the applications and current researctrends of BAN followed bythe conclusion.
This document describes the development of an affordable system to detect minute movements in radiology patients during treatment. The system uses a 9-degree of freedom sensor containing an accelerometer, gyroscope, and magnetometer. It communicates wirelessly via Bluetooth and is integrated with existing patient immobilization devices. Testing showed the sensor can reliably detect movements as small as 0.3 degrees or 1 millimeter, meeting the goal of developing an inexpensive alternative to existing movement detection systems that cost over $80,000.
This document presents a statistical path loss model for medical implant communication channels developed using an immersive 3D visualization environment. The environment allows simulation of radio frequency propagation from implantable antennas inside a virtual human body model. Simulations were performed for various near-surface and deep-tissue implant locations. A statistical path loss model was extracted from the simulation results to help optimize transceiver design for medical implants.
This document presents a statistical path loss model for radio frequency (RF) propagation from medical implants inside the human body. The authors used an immersive 3D visualization environment to simulate RF propagation from implant antennas in various locations within a 3D human body model. From the simulation data, they extracted statistical path loss models describing the relationship between received signal power and distance for deep tissue and near-surface implant scenarios. The models characterize implant-to-implant and implant-to-body surface propagation and can help optimize transceiver design for medical implant communication systems.
It gives an individual a general Idea about Expert System and the wide variety of it's Applications.We discuss the scope of Expert System in upcoming Future in various Domains and various Challenges.Some examples are also given of a few Expert Systems.
Real Time Condition Monitoring of Power Plant through DNP3 ProtocolIJRES Journal
condition monitoring plays an important role in the functioning of heavy rotating systems. The working of these systems need to be monitored continuously and the reading are to taken into account. This mechanism became easy with the generation of the microprocessors. The readings can be acquired and stored them into the servers. With the advent of increasing internet facility’s the data acquiring, controlling and sharing has became an easy task through various protocols. Using this techniques the systems readings are noticed by the operator, even though he is not concerning machine.
The man has been suffering with diseases and weired. Visually challenged people are blind people who are very common and difficult to deal with in their way. The main aim of this paper is to the visually challenged people with a better navigation tool. This smart walking stick is more sophisticated than a traditional walking stick. It uses a microcontroler to detect an obstacles in front, left, right side of a person. It is based on ultrasonic sensors for distance measurement property. For obstacle indication, there is voice playback which helps to mention a direction of obstacles around a visually challenged person by sensors. Along with this a receiver and buzzer placed on a stick .If the person missing a stick which can be find out by buzzer sound .This sound is induced when switch on a remote controller by visually challenged people .GPS also include in stick to find a visually challenged people.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
IRJET - Enhancing Indoor Mobility for Visually Impaired: A System with Real-T...IRJET Journal
The document presents a system to enhance indoor mobility for visually impaired people using real-time obstacle detection with QR codes and audio feedback. The system uses an ultrasonic sensor to detect obstacles and QR codes placed in locations to provide context through audio feedback to the user via headphones or speakers. When an obstacle is detected or a QR code is scanned, the microcontroller processes the data and triggers the voice recorder module to provide navigation assistance through audio cues to the user. The goal is to allow visually impaired individuals to safely and independently maneuver indoor environments.
IRJET- Virtual Eye for Visually Blind PeopleIRJET Journal
This document describes a proposed system called the "Virtual Eye" that uses sensors and a Raspberry Pi computer to help visually impaired people avoid obstacles. The system attaches ultrasonic sensors and a webcam to a smart stick, which detect obstacles and capture images. The Raspberry Pi then converts the images to text using OCR and speaks the text to the user through earphones using text-to-speech, alerting them to obstacles. It is intended to help visually impaired people walk independently by detecting nearby obstacles and notifying users, who can then take actions to avoid hazards. The system aims to improve safety and independence for the visually impaired.
Blue Eyes is a technology that aims to give computers human-like perceptual and sensory abilities. It uses sensors to monitor physiological data like eye movement of human operators to detect fatigue or other issues. A wireless Bluetooth system is used to acquire and transmit this physiological data in real-time without restricting operator mobility. The data is analyzed and can trigger alarms. Potential applications include monitoring operators in control rooms for power plants or aircraft to help prevent human errors from leading to accidents.
This document discusses different types of e-voting methods and their advantages and disadvantages. It describes e-voting as casting votes from a computer, and mentions optical scanning systems that allow computers to count marks on ballots. It focuses on direct-recording electronic (DRE) voting machines that use touchscreens to record votes directly into memory. Advantages include minimizing ambiguities and recounts, while disadvantages include security, reliability, and some generations' discomfort with technology. Hybrid systems that print verifiable paper ballots are also noted. The document provides examples of manipulated e-voting results.
DNA databases allow law enforcement to identify individuals by their DNA profiles. The largest DNA database is the FBI's CODIS database. DNA databases can help identify suspects in crimes and exonerate innocent convicts. However, they also raise privacy concerns about who has access to DNA records and how securely the records are stored. Surveillance, such as CCTV cameras, can help lower crime rates but also infringe on privacy by monitoring behavior without consent. Reliability, security, and control over personal data are ongoing issues with DNA databases and surveillance technologies.
Robotic surgery can be performed remotely with a designated fiber optic cable that provides a safe and reliable connection with a lag time of 200 milliseconds over 14,000 km, allowing for remote surgery. Expert diagnostic systems interface with users to provide advice from a knowledge base of facts and rules created from human experts, which is examined by an inference engine matching users' queries to the knowledge. Diagnostic and therapeutic tools in healthcare also include prosthetic devices, diagnostic software, and tools for drug development and marketing.
IB Computer Science Section 6.3 Operating Systemsstjulians school
An operating system handles input/output control, file maintenance, the software/hardware interface, memory allocation, constructs the user interface, controls software execution, and organises security and virtual memory. Operating systems can be single user, multi-user, or multi-processing. Multi-tasking allows one client to run multiple programs at once while multi-threading runs different parts of a single program simultaneously. Utility software performs specific hidden tasks like backups or antivirus protection, unlike applications which users choose for their needs.
Computer security protects information and property from threats while keeping it accessible to authorized users. There are three main categories of computer insecurity: vulnerabilities, exploits, and payloads. Vulnerabilities are weaknesses that allow attacks, exploits take advantage of vulnerabilities, and payloads are the harmful effects caused, such as deleting files or installing backdoors. Common security measures include usernames/passwords, firewalls, antivirus software, and encryption.
Storytelling is an incredibly valuable tool to share data and information. To get the most impact from stories there are a number of key ingredients. These are based on science and human nature. Using these elements in a story you can deliver information impactfully, ensure action and drive change.
At Techbox Square, in Singapore, we're not just creative web designers and developers, we're the driving force behind your brand identity. Contact us today.
Unveiling the Dynamic Personalities, Key Dates, and Horoscope Insights: Gemin...my Pandit
Explore the fascinating world of the Gemini Zodiac Sign. Discover the unique personality traits, key dates, and horoscope insights of Gemini individuals. Learn how their sociable, communicative nature and boundless curiosity make them the dynamic explorers of the zodiac. Dive into the duality of the Gemini sign and understand their intellectual and adventurous spirit.
Part 2 Deep Dive: Navigating the 2024 Slowdownjeffkluth1
Introduction
The global retail industry has weathered numerous storms, with the financial crisis of 2008 serving as a poignant reminder of the sector's resilience and adaptability. However, as we navigate the complex landscape of 2024, retailers face a unique set of challenges that demand innovative strategies and a fundamental shift in mindset. This white paper contrasts the impact of the 2008 recession on the retail sector with the current headwinds retailers are grappling with, while offering a comprehensive roadmap for success in this new paradigm.
Navigating the world of forex trading can be challenging, especially for beginners. To help you make an informed decision, we have comprehensively compared the best forex brokers in India for 2024. This article, reviewed by Top Forex Brokers Review, will cover featured award winners, the best forex brokers, featured offers, the best copy trading platforms, the best forex brokers for beginners, the best MetaTrader brokers, and recently updated reviews. We will focus on FP Markets, Black Bull, EightCap, IC Markets, and Octa.
Anny Serafina Love - Letter of Recommendation by Kellen Harkins, MS.AnnySerafinaLove
This letter, written by Kellen Harkins, Course Director at Full Sail University, commends Anny Love's exemplary performance in the Video Sharing Platforms class. It highlights her dedication, willingness to challenge herself, and exceptional skills in production, editing, and marketing across various video platforms like YouTube, TikTok, and Instagram.
At Techbox Square, in Singapore, we're not just creative web designers and developers, we're the driving force behind your brand identity. Contact us today.
Structural Design Process: Step-by-Step Guide for BuildingsChandresh Chudasama
The structural design process is explained: Follow our step-by-step guide to understand building design intricacies and ensure structural integrity. Learn how to build wonderful buildings with the help of our detailed information. Learn how to create structures with durability and reliability and also gain insights on ways of managing structures.
Event Report - SAP Sapphire 2024 Orlando - lots of innovation and old challengesHolger Mueller
Holger Mueller of Constellation Research shares his key takeaways from SAP's Sapphire confernece, held in Orlando, June 3rd till 5th 2024, in the Orange Convention Center.
SATTA MATKA SATTA FAST RESULT KALYAN TOP MATKA RESULT KALYAN SATTA MATKA FAST RESULT MILAN RATAN RAJDHANI MAIN BAZAR MATKA FAST TIPS RESULT MATKA CHART JODI CHART PANEL CHART FREE FIX GAME SATTAMATKA ! MATKA MOBI SATTA 143 spboss.in TOP NO1 RESULT FULL RATE MATKA ONLINE GAME PLAY BY APP SPBOSS
Top mailing list providers in the USA.pptxJeremyPeirce1
Discover the top mailing list providers in the USA, offering targeted lists, segmentation, and analytics to optimize your marketing campaigns and drive engagement.
IMPACT Silver is a pure silver zinc producer with over $260 million in revenue since 2008 and a large 100% owned 210km Mexico land package - 2024 catalysts includes new 14% grade zinc Plomosas mine and 20,000m of fully funded exploration drilling.
3 Simple Steps To Buy Verified Payoneer Account In 2024SEOSMMEARTH
Buy Verified Payoneer Account: Quick and Secure Way to Receive Payments
Buy Verified Payoneer Account With 100% secure documents, [ USA, UK, CA ]. Are you looking for a reliable and safe way to receive payments online? Then you need buy verified Payoneer account ! Payoneer is a global payment platform that allows businesses and individuals to send and receive money in over 200 countries.
If You Want To More Information just Contact Now:
Skype: SEOSMMEARTH
Telegram: @seosmmearth
Gmail: seosmmearth@gmail.com
[To download this presentation, visit:
https://www.oeconsulting.com.sg/training-presentations]
This presentation is a curated compilation of PowerPoint diagrams and templates designed to illustrate 20 different digital transformation frameworks and models. These frameworks are based on recent industry trends and best practices, ensuring that the content remains relevant and up-to-date.
Key highlights include Microsoft's Digital Transformation Framework, which focuses on driving innovation and efficiency, and McKinsey's Ten Guiding Principles, which provide strategic insights for successful digital transformation. Additionally, Forrester's framework emphasizes enhancing customer experiences and modernizing IT infrastructure, while IDC's MaturityScape helps assess and develop organizational digital maturity. MIT's framework explores cutting-edge strategies for achieving digital success.
These materials are perfect for enhancing your business or classroom presentations, offering visual aids to supplement your insights. Please note that while comprehensive, these slides are intended as supplementary resources and may not be complete for standalone instructional purposes.
Frameworks/Models included:
Microsoft’s Digital Transformation Framework
McKinsey’s Ten Guiding Principles of Digital Transformation
Forrester’s Digital Transformation Framework
IDC’s Digital Transformation MaturityScape
MIT’s Digital Transformation Framework
Gartner’s Digital Transformation Framework
Accenture’s Digital Strategy & Enterprise Frameworks
Deloitte’s Digital Industrial Transformation Framework
Capgemini’s Digital Transformation Framework
PwC’s Digital Transformation Framework
Cisco’s Digital Transformation Framework
Cognizant’s Digital Transformation Framework
DXC Technology’s Digital Transformation Framework
The BCG Strategy Palette
McKinsey’s Digital Transformation Framework
Digital Transformation Compass
Four Levels of Digital Maturity
Design Thinking Framework
Business Model Canvas
Customer Journey Map
How to Implement a Real Estate CRM SoftwareSalesTown
To implement a CRM for real estate, set clear goals, choose a CRM with key real estate features, and customize it to your needs. Migrate your data, train your team, and use automation to save time. Monitor performance, ensure data security, and use the CRM to enhance marketing. Regularly check its effectiveness to improve your business.
[To download this presentation, visit:
https://www.oeconsulting.com.sg/training-presentations]
This PowerPoint compilation offers a comprehensive overview of 20 leading innovation management frameworks and methodologies, selected for their broad applicability across various industries and organizational contexts. These frameworks are valuable resources for a wide range of users, including business professionals, educators, and consultants.
Each framework is presented with visually engaging diagrams and templates, ensuring the content is both informative and appealing. While this compilation is thorough, please note that the slides are intended as supplementary resources and may not be sufficient for standalone instructional purposes.
This compilation is ideal for anyone looking to enhance their understanding of innovation management and drive meaningful change within their organization. Whether you aim to improve product development processes, enhance customer experiences, or drive digital transformation, these frameworks offer valuable insights and tools to help you achieve your goals.
INCLUDED FRAMEWORKS/MODELS:
1. Stanford’s Design Thinking
2. IDEO’s Human-Centered Design
3. Strategyzer’s Business Model Innovation
4. Lean Startup Methodology
5. Agile Innovation Framework
6. Doblin’s Ten Types of Innovation
7. McKinsey’s Three Horizons of Growth
8. Customer Journey Map
9. Christensen’s Disruptive Innovation Theory
10. Blue Ocean Strategy
11. Strategyn’s Jobs-To-Be-Done (JTBD) Framework with Job Map
12. Design Sprint Framework
13. The Double Diamond
14. Lean Six Sigma DMAIC
15. TRIZ Problem-Solving Framework
16. Edward de Bono’s Six Thinking Hats
17. Stage-Gate Model
18. Toyota’s Six Steps of Kaizen
19. Microsoft’s Digital Transformation Framework
20. Design for Six Sigma (DFSS)
To download this presentation, visit:
https://www.oeconsulting.com.sg/training-presentations
HOW TO START UP A COMPANY A STEP-BY-STEP GUIDE.pdf46adnanshahzad
How to Start Up a Company: A Step-by-Step Guide Starting a company is an exciting adventure that combines creativity, strategy, and hard work. It can seem overwhelming at first, but with the right guidance, anyone can transform a great idea into a successful business. Let's dive into how to start up a company, from the initial spark of an idea to securing funding and launching your startup.
Introduction
Have you ever dreamed of turning your innovative idea into a thriving business? Starting a company involves numerous steps and decisions, but don't worry—we're here to help. Whether you're exploring how to start a startup company or wondering how to start up a small business, this guide will walk you through the process, step by step.
Company Valuation webinar series - Tuesday, 4 June 2024FelixPerez547899
This session provided an update as to the latest valuation data in the UK and then delved into a discussion on the upcoming election and the impacts on valuation. We finished, as always with a Q&A
8. Connection A designated fibre optic cable to ensure a safe and reliable connection, as well as minimal lag time. The estimated safe lag time for a remote surgery is estimated at 330milliseconds, however a designated fibre optic cable can deliver a 200millisecond lag time over a 14,000km round trip.
13. EXPERT SYSTEMS A user interface - This is the system that allows a non-expert user to query (question) the expert system, and to receive advice. The user-interface is designed to be a simple to use as possible. A knowledge base - This is a collection of facts and rules. The knowledge base is created from information provided by human experts An inference engine - This acts rather like a search engine, examining the knowledge base for information that matches the user's query (If then rules)