This document is the introduction to a book on dentures. It discusses copyright information for the book, noting that no part of the digital document may be reproduced without permission from the publisher. It provides copyright information for Nova Science Publishers, Inc. as the publisher of the book. It lists the editors of the book and provides a table of contents that outlines the 13 chapters contained within the book, which cover various topics related to dentures, including classification of partially edentulous dental arches, orthodontics for prosthetic dentistry patients, effects of denture wearing on jaw functions and brain activity, alternatives to removable dentures, and psychosomatic complications of denture fabrication.
This document discusses ectopic eruption of permanent first molars, which occurs when a first molar is blocked from complete eruption by the primary second molar. It has an incidence of 2-6% and is more common unilaterally and in the maxilla. Causes may include genetics, developmental disorders, increased tooth size/eruption angle, and small jaws. Complications include pulpitis, pain, premature tooth loss, and migration. Treatment depends on the severity of resorption and mobility, and may include observation, exposing impacted teeth, or using appliances to distalize and make space for impacted molars. Early space regaining after losing primary molars can help prevent problems like tipping, rotation
This document discusses different types of rests and rest seats used in removable partial dentures. It defines a rest as a rigid extension that contacts a prepared tooth surface to provide support. A rest seat is the prepared recess in a tooth to receive a rest. Different types of rests are described including occlusal, lingual, incisal, and implant rests. Requirements and considerations for preparing each type of rest and rest seat are provided. The functions of rests in maintaining occlusion and supporting removable partial dentures are also summarized.
Terminology and classification of fixed prosthodontics AlyaaAsaad1
This document provides an introduction to fixed prosthodontics. It defines fixed prosthodontics as the restoration or replacement of teeth with artificial substitutes that are attached to natural teeth, roots, or implants. It discusses different types of crowns and bridges, including full coverage crowns, partial coverage crowns, and fixed partial dentures (bridges). It also classifies crowns and bridges based on factors like material, mode of retention, and location in the mouth. The document aims to give an overview of common fixed prosthodontic treatments and components.
The document discusses connectors in fixed partial dentures. Connectors are defined as the portion of a fixed dental prosthesis that unites the retainers and pontics. Connectors must be sufficiently strong, elliptical in cross-section, and placed as lingually and incisally as possible in anterior teeth and in the occlusal third for posterior teeth. Rigid connectors include cast, soldered, and loop connectors while non-rigid connectors allow limited movement and include dovetail, split, and cross-pin connectors. Soldering techniques such as torch, oven, laser, and infrared soldering are described for joining connectors along with considerations for solder composition and properties.
A guideline for the enforced extraction of first permanent molars in children...Rami Magdi
This document provides guidelines for extracting first permanent molars in children. It discusses factors that influence extraction decisions such as the condition of surrounding teeth and underlying malocclusions. Ideal timing of extractions is outlined to allow for proper eruption of replacement teeth. Guidelines are given for various malocclusion classes, considering space requirements, optimal eruption timing, and risks of overeruption. Balancing and compensating extractions are generally not recommended except in some Class I cases to relieve crowding. Obtaining an orthodontic opinion is advised when possible.
Proximal contacts and contours are important dental features that impact oral health. There are three main tooth types - tapering, square, and ovoid - which determine the location of contact areas between teeth. Proper contacts help prevent food impaction and protect the periodontium. Contacts typically occur in the incisal or middle thirds of teeth and create embrasures. Faulty contacts can lead to periodontal disease and decay.
This document discusses ectopic eruption of permanent first molars, which occurs when a first molar is blocked from complete eruption by the primary second molar. It has an incidence of 2-6% and is more common unilaterally and in the maxilla. Causes may include genetics, developmental disorders, increased tooth size/eruption angle, and small jaws. Complications include pulpitis, pain, premature tooth loss, and migration. Treatment depends on the severity of resorption and mobility, and may include observation, exposing impacted teeth, or using appliances to distalize and make space for impacted molars. Early space regaining after losing primary molars can help prevent problems like tipping, rotation
This document discusses different types of rests and rest seats used in removable partial dentures. It defines a rest as a rigid extension that contacts a prepared tooth surface to provide support. A rest seat is the prepared recess in a tooth to receive a rest. Different types of rests are described including occlusal, lingual, incisal, and implant rests. Requirements and considerations for preparing each type of rest and rest seat are provided. The functions of rests in maintaining occlusion and supporting removable partial dentures are also summarized.
Terminology and classification of fixed prosthodontics AlyaaAsaad1
This document provides an introduction to fixed prosthodontics. It defines fixed prosthodontics as the restoration or replacement of teeth with artificial substitutes that are attached to natural teeth, roots, or implants. It discusses different types of crowns and bridges, including full coverage crowns, partial coverage crowns, and fixed partial dentures (bridges). It also classifies crowns and bridges based on factors like material, mode of retention, and location in the mouth. The document aims to give an overview of common fixed prosthodontic treatments and components.
The document discusses connectors in fixed partial dentures. Connectors are defined as the portion of a fixed dental prosthesis that unites the retainers and pontics. Connectors must be sufficiently strong, elliptical in cross-section, and placed as lingually and incisally as possible in anterior teeth and in the occlusal third for posterior teeth. Rigid connectors include cast, soldered, and loop connectors while non-rigid connectors allow limited movement and include dovetail, split, and cross-pin connectors. Soldering techniques such as torch, oven, laser, and infrared soldering are described for joining connectors along with considerations for solder composition and properties.
A guideline for the enforced extraction of first permanent molars in children...Rami Magdi
This document provides guidelines for extracting first permanent molars in children. It discusses factors that influence extraction decisions such as the condition of surrounding teeth and underlying malocclusions. Ideal timing of extractions is outlined to allow for proper eruption of replacement teeth. Guidelines are given for various malocclusion classes, considering space requirements, optimal eruption timing, and risks of overeruption. Balancing and compensating extractions are generally not recommended except in some Class I cases to relieve crowding. Obtaining an orthodontic opinion is advised when possible.
Proximal contacts and contours are important dental features that impact oral health. There are three main tooth types - tapering, square, and ovoid - which determine the location of contact areas between teeth. Proper contacts help prevent food impaction and protect the periodontium. Contacts typically occur in the incisal or middle thirds of teeth and create embrasures. Faulty contacts can lead to periodontal disease and decay.
1. The document provides guidelines for positioning patients and dentists for different types of tooth extractions. It describes positioning patients upright for mandibular extractions and tilting the chair back for maxillary extractions.
2. Techniques for extracting different types of teeth are outlined, including using desmotomes to sever soft tissue, various types of forceps, and elevators to leverage teeth from sockets.
3. Proper movements and application of controlled force are emphasized to safely luxate and remove teeth without root fractures. Initial movements vary by tooth type, but final extraction movements should always be outward and occlusal.
This document contains descriptions of 6 dental surgery exam stations. Each station presents a clinical case including patient history and exam findings, followed by questions for the examiner to answer. The cases include a patient with tooth pain and swelling, periodontal disease, post-extraction bleeding, dental instruments identification, sensitive teeth, mandibular fracture after trauma, and a palatal lesion. The questions assess diagnosis, causes, risk factors, complications, management principles, and treatment options.
This document summarizes a continued care model for pediatric preventive dentistry. It discusses key factors in caries prevention like oral hygiene, diet, fluoride therapy, and fissure sealants. It outlines a model where children are classified based on their risk level and receive health promotion materials every 6 weeks. The goal is to reward cavity-free children with a "No Cavity Club" membership and cash value they can use at stores. The model aims to increase awareness, motivate healthy behaviors, and invest in children's oral health long-term.
Introduction to operative dentistry part Idrferas2
Operative dentistry involves the prevention, diagnosis, and treatment of defects in the enamel and dentin of teeth. The goal is to eliminate disease and restore oral health, function, and aesthetics. A proper diagnosis and treatment plan that considers the patient's overall health is required to return the affected area to a state of health and function.
Extraction of primary teeth balance and compensationRami Magdi
When faced with extracting a primary tooth, practitioners must decide whether to extract the contralateral tooth for balance or a tooth in the opposing arch for compensation. This document provides guidelines for these decisions based on clinical opinion and available research. It recommends that balance extractions may be needed for early loss of primary canines or first molars in crowded arches to minimize centerline shift. Compensation is generally not recommended. Space maintainers should be considered for early loss of primary second molars or in severely crowded arches to prevent space loss and drifting of permanent teeth. More research is still needed on the consequences of early primary tooth loss.
Principles of elevator and forceps use (Dentistry)Ahmed Al-Dawoodi
Elevators are used to luxate teeth by disrupting the periodontal ligaments. Forceps then expand the bony socket through five motions: apical pressure displaces the tooth's center of rotation and expands the socket; buccal and lingual/palatal pressure further expand the socket; rotational pressure tears the periodontal ligaments; and traction finally removes the tooth. Together, elevators and forceps work to luxate teeth from the alveolar process through bone expansion and ligament disruption.
This document discusses the procedures and assessments involved in a trial denture appointment, including verifying the centric relation record, evaluating esthetics and phonetics, and creating a posterior palatal seal. The trial denture setup is tentative and allows the dentist to make changes based on the patient's esthetic needs and occlusion. The goal of the appointment is to ensure proper vertical dimension, centric relation, protrusive records, and phonetics before the final dentures are fabricated.
BIOMECHANICAL PRINCIPLES OF TOOTH PREPARATIONAamir Godil
The document discusses the principles of tooth preparation for dental restorations. It is divided into three categories: biologic considerations which focus on tissue health, mechanical considerations related to restoration integrity and durability, and esthetic considerations affecting patient appearance. Key points include the importance of conserving tooth structure, placing margins for easy finishing and hygiene, designing taper and contours for adequate retention and resistance, and selecting materials and techniques to meet esthetic needs. Proper tooth preparation is essential for successful long-term restoration outcomes.
Root canal anatomy and configuration project mandibular teeth [autosaved]AbdElazim Badreldin
This document discusses the root canal anatomy of several mandibular teeth. It describes the typical root and canal morphology of the mandibular central incisor, lateral incisor, canine, first premolar, second premolar, and first and second molars. For each tooth, it provides information on the number of roots and canals, root lengths and shapes, canal configurations, and variations seen in different populations. It also includes descriptions and images of access cavity preparations for root canal treatment.
The document discusses several common toothbrushing techniques:
The Bass Method involves brushing teeth with short back-and-forth strokes at a 45 degree angle for 10 seconds per group of teeth.
The Rolling Stroke directs the brush filaments toward the root and rolls the brush over the teeth as the wrist turns, following tooth contours.
The Stillman Method is similar to the Bass Method but places filaments half in the gingival sulcus and half on the gingiva before vibrating.
The Charters Method angles filaments at 45 degrees toward tooth chewing surfaces, vibrating firmly against each tooth before moving to the next.
This document discusses the bisecting angle technique for intraoral radiography. It explains that the bisecting angle technique involves positioning the x-ray beam perpendicular to the long axis of the tooth by bisecting the angle between the tooth and the film. The document notes that proper horizontal and vertical angulation is needed to avoid issues like overlap or shortening/lengthening of teeth. It concludes with a thank you.
Extraction of Teeth involves removing teeth from the mouth. There are two main methods - intra-alveolar extraction which uses dental forceps, and trans-alveolar extraction which uses surgical techniques. Proper technique is important to remove the tooth with minimal trauma. Factors like tooth condition, location in the mouth, and related anatomy determine the appropriate tools and extraction method used.
This document discusses methods for analyzing dental casts, including evaluating arch form, tooth alignment and relationships, occlusal relationships, and estimating space required for permanent teeth using radiographs of the mixed dentition. Key aspects that can be examined on dental casts include tooth presence, crowding, spacing, rotations, displacements, and occlusal relationships between the incisors, canines, and molars. Radiographs of the mixed dentition allow estimating future tooth size to determine space availability.
This document discusses laminate veneers, including:
1. Laminate veneers have evolved over decades to become a popular aesthetic restoration, providing a conservative alternative to full coverage restorations.
2. They involve bonding thin ceramic restorations to etched tooth structure to restore the facial and proximal surfaces.
3. Indications include masking diastemas, discoloration, enamel defects, malpositioned teeth, while contraindications include insufficient tooth structure or parafunctional habits.
Dr. Maryam Boorboor provides an overview of common dentistry instruments used in basic dental procedures, scaling and root planing, amalgam/composite fillings, anesthesia, radiography, endodontics, prosthodontics, pediatrics, and oral surgery. The document lists and images over 100 instruments categorized by use including mirrors, probes, scalers, handpieces, needles, forceps, elevators, and more. Dr. Boorboor aims to inform readers about the basic and specialized tools involved in dentistry practice and procedures.
anterior cross-bites in primary mixed dentition-pedoParth Thakkar
1) Anterior crossbite can be caused by dental factors like traumatic injuries, supernumerary teeth, or skeletal factors like deficient maxillary growth.
2) Early treatment is important to prevent functional shifts from worsening the malocclusion.
3) Various appliances can be used depending on the cause, including tongue blades, inclined planes, springs, and facemasks with rapid maxillary expanders.
4) Failure to treat anterior crossbites early could lead to need for more complicated orthodontic or surgical procedures later.
Comparative study of removable & fixed orthodontic applianceSk Aziz Ikbal
The document discusses removable and fixed orthodontic appliances. Removable appliances can tip teeth but cannot perform complex movements like fixed appliances. Removable appliances are easier to construct and manage, require less chair time, and allow for oral hygiene. However, they rely more on patient compliance and cannot move teeth as precisely as fixed appliances. While removable appliances can address mild to moderate malocclusions, fixed appliances offer better control and are needed for more complicated cases.
1. Rests and rest seats provide support and retention for removable partial dentures. A rest sits in a preparation and a rest seat is the prepared portion of a tooth to receive a rest.
2. Rests and rest seats function to direct forces along the long axis of teeth, prevent denture movement, and maintain the relationship between clasps and teeth.
3. Rest seats are prepared with burs or diamonds to provide a smooth contour that directs forces correctly. Occlusal rests are triangular while cingulum rests form an inverted V-shape less than 90 degrees.
1. The document describes the process of using a digital impression and preliminary jaw relation record to fabricate custom trays (CAD/CAM trays) for making definitive impressions.
2. A digital impression of the edentulous jaws is taken using an intraoral scanner, and a preliminary jaw relation record is made by scanning a jig made of polymerized silicone putty placed between the jaws.
3. CAD software is used to create images of custom trays based on the digital impression and jaw relation record. The custom trays can then be fabricated using 3D printing.
This introductory chapter provides an overview of communication disorders and the fields of speech-language pathology and audiology. It discusses the importance of communication for distinguishing humans from other animals. The chapter emphasizes that studying communication disorders can provide insight into how people are treated and hopes for overcoming human problems. It presents a brief history of societal attitudes toward disability to understand the burdens faced by those with communication impairments. The overall message is that helping people regain communication abilities through these professions adds meaning to one's life and can initiate positive change in the world.
This document provides an overview of a clinical guidebook about peri-implant therapy for dental hygienists. The guidebook covers the history of dental implants, patient selection criteria, implant placement considerations, adjunctive procedures, treatment planning, communicating with patients, assessing and monitoring implant success, complications, home care instructions, and in-office maintenance. It is intended to help hygienists play an important role in the long-term success and maintenance of dental implants. The foreword discusses the increasing prevalence of dental implants and importance of periodontal maintenance for osseointegration and long-term success.
1. The document provides guidelines for positioning patients and dentists for different types of tooth extractions. It describes positioning patients upright for mandibular extractions and tilting the chair back for maxillary extractions.
2. Techniques for extracting different types of teeth are outlined, including using desmotomes to sever soft tissue, various types of forceps, and elevators to leverage teeth from sockets.
3. Proper movements and application of controlled force are emphasized to safely luxate and remove teeth without root fractures. Initial movements vary by tooth type, but final extraction movements should always be outward and occlusal.
This document contains descriptions of 6 dental surgery exam stations. Each station presents a clinical case including patient history and exam findings, followed by questions for the examiner to answer. The cases include a patient with tooth pain and swelling, periodontal disease, post-extraction bleeding, dental instruments identification, sensitive teeth, mandibular fracture after trauma, and a palatal lesion. The questions assess diagnosis, causes, risk factors, complications, management principles, and treatment options.
This document summarizes a continued care model for pediatric preventive dentistry. It discusses key factors in caries prevention like oral hygiene, diet, fluoride therapy, and fissure sealants. It outlines a model where children are classified based on their risk level and receive health promotion materials every 6 weeks. The goal is to reward cavity-free children with a "No Cavity Club" membership and cash value they can use at stores. The model aims to increase awareness, motivate healthy behaviors, and invest in children's oral health long-term.
Introduction to operative dentistry part Idrferas2
Operative dentistry involves the prevention, diagnosis, and treatment of defects in the enamel and dentin of teeth. The goal is to eliminate disease and restore oral health, function, and aesthetics. A proper diagnosis and treatment plan that considers the patient's overall health is required to return the affected area to a state of health and function.
Extraction of primary teeth balance and compensationRami Magdi
When faced with extracting a primary tooth, practitioners must decide whether to extract the contralateral tooth for balance or a tooth in the opposing arch for compensation. This document provides guidelines for these decisions based on clinical opinion and available research. It recommends that balance extractions may be needed for early loss of primary canines or first molars in crowded arches to minimize centerline shift. Compensation is generally not recommended. Space maintainers should be considered for early loss of primary second molars or in severely crowded arches to prevent space loss and drifting of permanent teeth. More research is still needed on the consequences of early primary tooth loss.
Principles of elevator and forceps use (Dentistry)Ahmed Al-Dawoodi
Elevators are used to luxate teeth by disrupting the periodontal ligaments. Forceps then expand the bony socket through five motions: apical pressure displaces the tooth's center of rotation and expands the socket; buccal and lingual/palatal pressure further expand the socket; rotational pressure tears the periodontal ligaments; and traction finally removes the tooth. Together, elevators and forceps work to luxate teeth from the alveolar process through bone expansion and ligament disruption.
This document discusses the procedures and assessments involved in a trial denture appointment, including verifying the centric relation record, evaluating esthetics and phonetics, and creating a posterior palatal seal. The trial denture setup is tentative and allows the dentist to make changes based on the patient's esthetic needs and occlusion. The goal of the appointment is to ensure proper vertical dimension, centric relation, protrusive records, and phonetics before the final dentures are fabricated.
BIOMECHANICAL PRINCIPLES OF TOOTH PREPARATIONAamir Godil
The document discusses the principles of tooth preparation for dental restorations. It is divided into three categories: biologic considerations which focus on tissue health, mechanical considerations related to restoration integrity and durability, and esthetic considerations affecting patient appearance. Key points include the importance of conserving tooth structure, placing margins for easy finishing and hygiene, designing taper and contours for adequate retention and resistance, and selecting materials and techniques to meet esthetic needs. Proper tooth preparation is essential for successful long-term restoration outcomes.
Root canal anatomy and configuration project mandibular teeth [autosaved]AbdElazim Badreldin
This document discusses the root canal anatomy of several mandibular teeth. It describes the typical root and canal morphology of the mandibular central incisor, lateral incisor, canine, first premolar, second premolar, and first and second molars. For each tooth, it provides information on the number of roots and canals, root lengths and shapes, canal configurations, and variations seen in different populations. It also includes descriptions and images of access cavity preparations for root canal treatment.
The document discusses several common toothbrushing techniques:
The Bass Method involves brushing teeth with short back-and-forth strokes at a 45 degree angle for 10 seconds per group of teeth.
The Rolling Stroke directs the brush filaments toward the root and rolls the brush over the teeth as the wrist turns, following tooth contours.
The Stillman Method is similar to the Bass Method but places filaments half in the gingival sulcus and half on the gingiva before vibrating.
The Charters Method angles filaments at 45 degrees toward tooth chewing surfaces, vibrating firmly against each tooth before moving to the next.
This document discusses the bisecting angle technique for intraoral radiography. It explains that the bisecting angle technique involves positioning the x-ray beam perpendicular to the long axis of the tooth by bisecting the angle between the tooth and the film. The document notes that proper horizontal and vertical angulation is needed to avoid issues like overlap or shortening/lengthening of teeth. It concludes with a thank you.
Extraction of Teeth involves removing teeth from the mouth. There are two main methods - intra-alveolar extraction which uses dental forceps, and trans-alveolar extraction which uses surgical techniques. Proper technique is important to remove the tooth with minimal trauma. Factors like tooth condition, location in the mouth, and related anatomy determine the appropriate tools and extraction method used.
This document discusses methods for analyzing dental casts, including evaluating arch form, tooth alignment and relationships, occlusal relationships, and estimating space required for permanent teeth using radiographs of the mixed dentition. Key aspects that can be examined on dental casts include tooth presence, crowding, spacing, rotations, displacements, and occlusal relationships between the incisors, canines, and molars. Radiographs of the mixed dentition allow estimating future tooth size to determine space availability.
This document discusses laminate veneers, including:
1. Laminate veneers have evolved over decades to become a popular aesthetic restoration, providing a conservative alternative to full coverage restorations.
2. They involve bonding thin ceramic restorations to etched tooth structure to restore the facial and proximal surfaces.
3. Indications include masking diastemas, discoloration, enamel defects, malpositioned teeth, while contraindications include insufficient tooth structure or parafunctional habits.
Dr. Maryam Boorboor provides an overview of common dentistry instruments used in basic dental procedures, scaling and root planing, amalgam/composite fillings, anesthesia, radiography, endodontics, prosthodontics, pediatrics, and oral surgery. The document lists and images over 100 instruments categorized by use including mirrors, probes, scalers, handpieces, needles, forceps, elevators, and more. Dr. Boorboor aims to inform readers about the basic and specialized tools involved in dentistry practice and procedures.
anterior cross-bites in primary mixed dentition-pedoParth Thakkar
1) Anterior crossbite can be caused by dental factors like traumatic injuries, supernumerary teeth, or skeletal factors like deficient maxillary growth.
2) Early treatment is important to prevent functional shifts from worsening the malocclusion.
3) Various appliances can be used depending on the cause, including tongue blades, inclined planes, springs, and facemasks with rapid maxillary expanders.
4) Failure to treat anterior crossbites early could lead to need for more complicated orthodontic or surgical procedures later.
Comparative study of removable & fixed orthodontic applianceSk Aziz Ikbal
The document discusses removable and fixed orthodontic appliances. Removable appliances can tip teeth but cannot perform complex movements like fixed appliances. Removable appliances are easier to construct and manage, require less chair time, and allow for oral hygiene. However, they rely more on patient compliance and cannot move teeth as precisely as fixed appliances. While removable appliances can address mild to moderate malocclusions, fixed appliances offer better control and are needed for more complicated cases.
1. Rests and rest seats provide support and retention for removable partial dentures. A rest sits in a preparation and a rest seat is the prepared portion of a tooth to receive a rest.
2. Rests and rest seats function to direct forces along the long axis of teeth, prevent denture movement, and maintain the relationship between clasps and teeth.
3. Rest seats are prepared with burs or diamonds to provide a smooth contour that directs forces correctly. Occlusal rests are triangular while cingulum rests form an inverted V-shape less than 90 degrees.
1. The document describes the process of using a digital impression and preliminary jaw relation record to fabricate custom trays (CAD/CAM trays) for making definitive impressions.
2. A digital impression of the edentulous jaws is taken using an intraoral scanner, and a preliminary jaw relation record is made by scanning a jig made of polymerized silicone putty placed between the jaws.
3. CAD software is used to create images of custom trays based on the digital impression and jaw relation record. The custom trays can then be fabricated using 3D printing.
This introductory chapter provides an overview of communication disorders and the fields of speech-language pathology and audiology. It discusses the importance of communication for distinguishing humans from other animals. The chapter emphasizes that studying communication disorders can provide insight into how people are treated and hopes for overcoming human problems. It presents a brief history of societal attitudes toward disability to understand the burdens faced by those with communication impairments. The overall message is that helping people regain communication abilities through these professions adds meaning to one's life and can initiate positive change in the world.
This document provides an overview of a clinical guidebook about peri-implant therapy for dental hygienists. The guidebook covers the history of dental implants, patient selection criteria, implant placement considerations, adjunctive procedures, treatment planning, communicating with patients, assessing and monitoring implant success, complications, home care instructions, and in-office maintenance. It is intended to help hygienists play an important role in the long-term success and maintenance of dental implants. The foreword discusses the increasing prevalence of dental implants and importance of periodontal maintenance for osseointegration and long-term success.
This document provides instructions for redeeming an eBook version of the Handbook of Local Anesthesia textbook. It explains that the eBook can be accessed on any screen, at any time, anywhere by entering the unique PIN code found inside the book cover on the expertconsult.inkling.com website. Technical support contact information is provided at the end in case the user encounters any issues redeeming or accessing the eBook.
B.K.B. Berkovitz_ G R Holland_ Bernard J Moxham - Oral Anatomy, Histology and...saeedkhantareen33
This document provides an overview of student resources that are included with the purchase of Berkovitz's Oral Anatomy, Histology and Embryology, Fifth Edition textbook. The resources include:
- Helpful topic overviews that condense essential information.
- Immediate feedback on academic progress and learning.
- Integrated anatomical, physiological, and biochemical information as it relates to clinical practice.
- A wide range of questions to aid understanding and revision.
The complete learning experience from the textbook can be accessed by registering online.
The document discusses the safety and effectiveness of fluoride for dental health. It states that fluoride has been shown to reduce cavities and reverse enamel damage when used as intended. While some have concerns, studies by organizations like the AAPD have found no evidence of harmful effects from fluoride at levels used in dental treatments and products. The dental practice provides information on fluoride and treats patients of all ages, including those with special needs.
Dental research process: a trial to understand, and how to connect with the s...Mohamed A. Galal
A trial to understand Dental Research Process, that can help assistant researchers and research assistants in Dental fields to go into their profession more and more.
1- Skills
2- Ideas
3- Relations
4- Mentor
5- Funding
This document is a resume for Lauren Melina Kuta, who is a PharmD candidate at Rosalind Franklin University of Medicine. The 3 sentence summary is:
Lauren is seeking a career in pharmacy where she can help patients achieve optimal health. She has a strong educational background including a Bachelor's in Biological Sciences and is currently pursuing her Doctorate of Pharmacy. Lauren has extensive pharmacy work and research experience including positions at multiple pharmacies and hospitals during her clinical rotations.
This document provides information about the 2014 Conference on Pediatric Health Care hosted by the National Association of Pediatric Nurse Practitioners (NAPNAP) in Boston, MA from March 11-14, 2014. The conference schedule includes over 25 contact hours of sessions on various clinical topics, workshops, and networking opportunities for pediatric health care professionals. Session topics include pharmacology, mental health, acute care issues, health promotion, research findings and more. Keynote speakers, business meetings, exhibits and special events are also included in the program.
Medical Presentations: A Prescription for Success 1st EditionLucky Gods
Master the Stage! ⚕️ Medical Presentations: A Prescription for Success (1st Edition)
Ever dreamed of delivering killer medical presentations that captivate your audience and land applause? This game-changing ebook is your prescription for success!
Get ready to unlock the secrets of compelling storytelling, visual mastery, and engaging delivery. ✨ Learn how to craft presentations that are clear, concise, and impactful, ensuring your message resonates with every listener. 🩺
Dive into a wealth of practical tips, proven strategies, and expert insights that will transform you from a nervous presenter to a confident pro. This ebook is your essential companion for delivering unforgettable medical presentations that ignite action and inspire change.
Ready to unleash your inner presentation rockstar? Scroll down and grab your copy today!
This document provides an introduction and table of contents for the book "Clinical Maxillary Sinus Elevation Surgery". The book contains 14 chapters authored by experts on the topics of anatomy, radiography, surgical techniques, complications and management, graft materials, and outcomes of maxillary sinus elevation procedures. It focuses on the lateral window and osteotome approaches for sinus elevation to allow placement of dental implants in the posterior maxilla.
This document provides an overview of a book titled "Evidence-Based Decision Making: A Translational Guide for Dental Professionals". The book teaches dental professionals the essential skills of evidence-based decision making, including how to form clinical questions based on a patient case, search efficiently for relevant evidence, critically appraise evidence, apply evidence to patient care, and evaluate their EBDM performance. Each chapter contains objectives, activities, and case examples to reinforce skills. The goal is for readers to complete the full EBDM process for different clinical question types.
How To Write A Law Essay University - Aiston TextIoulia King
Florence gained leadership of the Renaissance through its economic prosperity, patronage of the arts, and intellectual culture. The Medici family dominated Florence politically and financially for around 60 years, using their wealth to become major patrons of art and learning. Florence's central location in Italy and access to trade routes through conquered Pisa allowed it to thrive economically. This wealth then supported the artistic and intellectual flourishing of the Renaissance in Florence, establishing it as the birthplace and initial leader of the cultural movement in Europe.
Plenary presentation at the Philippine Society of Youth Science Clubs convention 24 Feb 2017 at the GT-Toyota Asian Center auditorium, University of the Philippines Diliman.
AuD admitted student open house spring 2021Dick Detzner
This document summarizes an open house for the AuD graduate program at the University of Illinois. It highlights the strengths of the program including excellent faculty who are national leaders, strong academic and clinical training, and a variety of clinical opportunities. The 4-year AuD program includes coursework, clinical experience, and a capstone project. Students gain experience at the university clinic as well as external placement sites. Financial assistance is available to students through teaching and research positions.
Citrus CollegeWinter 2021--English 101EInstructor David GodoyVinaOconner450
Citrus College
Winter 2021--English 101EInstructor: David Godoy
Propose a
Solution
to an Issue/Problem
Throughout the span of time, humankind has had to continually seek out solutions to issues at hand. For example, the telephone was invented to facilitate a streamlined method of communication across vast distances. The microwave was brought forth as a tool for quickly heating up meals, etc.
Our species has always had to adapt solutions to issues as they arise. From serious issues to lighter ones, we as a people have managed to move forward through ingenious invention and collaboration.
This assignment is an opportunity for you to put your own foot forward by offering your own solutionto an issue/problem.
*What makes this project ‘research’ is the fact that you are required to draw from a minimum of 4 secondary sources to introduce your explored issue and support your proposed solution.
So, for example, if I was arguing for the importance of switching over to an electric car, I would draw from my secondary sources to frame the environmental harm caused by fossil fuels. I would use my research to explain how oil is the most consumed form of fossil fuel for energy conversion. I would then move to forward the fact that our planet has a limited fossil fuel reserve.
Thanks to my front-loading the reader with the context behind my chosen issue, I would then draw from my research to support my argument for switching over to an electric car.
Things to Consider
-What is the issue/problem that you are moving to solve?
-Why is it an issue?
-Who does it affect?
-What is the big deal? (so what?)
-What is at stake?
-What is your proposed solution?
-Why will your solution work?
-Why is your solution better than others?
-What might those opposing your solution say against it?
-How would you defend your solution?
-What are the costs of your solution? (what does it take to enact your solution?)
-Do your solution’s pros outweigh any cons that it may involve?
-How would your proposed solution make the world a better place?
-Anything else?
Format Requirements
-MLA Citation
-1" Margins All Around
-Times New Roman/Arial
-12pt font
-Double Spaced
-Works Cited Page
Minimum of 4 Pages
You are required to draw from a minimum of 4 credible outside sources.
*At least two of these sources must come from the Citrus College library research database.
Distribution of Points
-Essay= 125 points
-peer workshop= 20 points
-correct MLA Format + works cited page= 5 points
Important Dates
Librarian Research
Workshop: *week of1/25
Outline--Deadline *1/31
Workshop: *Post rough draft by 2/3.
Final Draft Due: Thursday, 2/11/2021
(by 11:59pm)
Grading Criteria
Use this to help build and revise your essay.
1. Does the essay have a clear purpose and direction, including a thesis statement with a clear and arguable solution?
2. Do ...
This document provides guidelines for various vital pulp therapies including apexogenesis, pulpotomy, pulpal debridement, indirect pulp capping, and direct pulp capping. It outlines the indications, procedures, and objectives for each therapy. Apexogenesis involves capping a mechanically exposed pulp to encourage continued root development. Pulpotomy involves removing coronal pulp and placing a medicament to maintain pulp vitality. Pulpal debridement provides temporary pain relief before root canal treatment. Indirect pulp capping involves excavating deep caries near the pulp and placing a barrier to prevent future exposure. The document emphasizes maintaining pulp vitality, monitoring root development, and preventing periapical issues with these therapies.
The biomechanics of running involves the study of the mechanical principles underlying running movements. It includes the analysis of the running gait cycle, which consists of the stance phase (foot contact to push-off) and the swing phase (foot lift-off to next contact). Key aspects include kinematics (joint angles and movements, stride length and frequency) and kinetics (forces involved in running, including ground reaction and muscle forces). Understanding these factors helps in improving running performance, optimizing technique, and preventing injuries.
5-hydroxytryptamine or 5-HT or Serotonin is a neurotransmitter that serves a range of roles in the human body. It is sometimes referred to as the happy chemical since it promotes overall well-being and happiness.
It is mostly found in the brain, intestines, and blood platelets.
5-HT is utilised to transport messages between nerve cells, is known to be involved in smooth muscle contraction, and adds to overall well-being and pleasure, among other benefits. 5-HT regulates the body's sleep-wake cycles and internal clock by acting as a precursor to melatonin.
It is hypothesised to regulate hunger, emotions, motor, cognitive, and autonomic processes.
- Video recording of this lecture in English language: https://youtu.be/Pt1nA32sdHQ
- Video recording of this lecture in Arabic language: https://youtu.be/uFdc9F0rlP0
- Link to download the book free: https://nephrotube.blogspot.com/p/nephrotube-nephrology-books.html
- Link to NephroTube website: www.NephroTube.com
- Link to NephroTube social media accounts: https://nephrotube.blogspot.com/p/join-nephrotube-on-social-media.html
The Children are very vulnerable to get affected with respiratory disease.
In our country, the respiratory Disease conditions are consider as major cause for mortality and Morbidity in Child.
Travel Clinic Cardiff: Health Advice for International TravelersNX Healthcare
Travel Clinic Cardiff offers comprehensive travel health services, including vaccinations, travel advice, and preventive care for international travelers. Our expert team ensures you are well-prepared and protected for your journey, providing personalized consultations tailored to your destination. Conveniently located in Cardiff, we help you travel with confidence and peace of mind. Visit us: www.nxhealthcare.co.uk
- Video recording of this lecture in English language: https://youtu.be/RvdYsTzgQq8
- Video recording of this lecture in Arabic language: https://youtu.be/ECILGWtgZko
- Link to download the book free: https://nephrotube.blogspot.com/p/nephrotube-nephrology-books.html
- Link to NephroTube website: www.NephroTube.com
- Link to NephroTube social media accounts: https://nephrotube.blogspot.com/p/join-nephrotube-on-social-media.html
PGx Analysis in VarSeq: A User’s PerspectiveGolden Helix
Since our release of the PGx capabilities in VarSeq, we’ve had a few months to gather some insights from various use cases. Some users approach PGx workflows by means of array genotyping or what seems to be a growing trend of adding the star allele calling to the existing NGS pipeline for whole genome data. Luckily, both approaches are supported with the VarSeq software platform. The genotyping method being used will also dictate what the scope of the tertiary analysis will be. For example, are your PGx reports a standalone pipeline or would your lab’s goal be to handle a dual-purpose workflow and report on PGx + Diagnostic findings.
The purpose of this webcast is to:
Discuss and demonstrate the approaches with array and NGS genotyping methods for star allele calling to prep for downstream analysis.
Following genotyping, explore alternative tertiary workflow concepts in VarSeq to handle PGx reporting.
Moreover, we will include insights users will need to consider when validating their PGx workflow for all possible star alleles and options you have for automating your PGx analysis for large number of samples. Please join us for a session dedicated to the application of star allele genotyping and subsequent PGx workflows in our VarSeq software.
Osvaldo Bernardo Muchanga-GASTROINTESTINAL INFECTIONS AND GASTRITIS-2024.pdfOsvaldo Bernardo Muchanga
GASTROINTESTINAL INFECTIONS AND GASTRITIS
Osvaldo Bernardo Muchanga
Gastrointestinal Infections
GASTROINTESTINAL INFECTIONS result from the ingestion of pathogens that cause infections at the level of this tract, generally being transmitted by food, water and hands contaminated by microorganisms such as E. coli, Salmonella, Shigella, Vibrio cholerae, Campylobacter, Staphylococcus, Rotavirus among others that are generally contained in feces, thus configuring a FECAL-ORAL type of transmission.
Among the factors that lead to the occurrence of gastrointestinal infections are the hygienic and sanitary deficiencies that characterize our markets and other places where raw or cooked food is sold, poor environmental sanitation in communities, deficiencies in water treatment (or in the process of its plumbing), risky hygienic-sanitary habits (not washing hands after major and/or minor needs), among others.
These are generally consequences (signs and symptoms) resulting from gastrointestinal infections: diarrhea, vomiting, fever and malaise, among others.
The treatment consists of replacing lost liquids and electrolytes (drinking drinking water and other recommended liquids, including consumption of juicy fruits such as papayas, apples, pears, among others that contain water in their composition).
To prevent this, it is necessary to promote health education, improve the hygienic-sanitary conditions of markets and communities in general as a way of promoting, preserving and prolonging PUBLIC HEALTH.
Gastritis and Gastric Health
Gastric Health is one of the most relevant concerns in human health, with gastrointestinal infections being among the main illnesses that affect humans.
Among gastric problems, we have GASTRITIS AND GASTRIC ULCERS as the main public health problems. Gastritis and gastric ulcers normally result from inflammation and corrosion of the walls of the stomach (gastric mucosa) and are generally associated (caused) by the bacterium Helicobacter pylor, which, according to the literature, this bacterium settles on these walls (of the stomach) and starts to release urease that ends up altering the normal pH of the stomach (acid), which leads to inflammation and corrosion of the mucous membranes and consequent gastritis or ulcers, respectively.
In addition to bacterial infections, gastritis and gastric ulcers are associated with several factors, with emphasis on prolonged fasting, chemical substances including drugs, alcohol, foods with strong seasonings including chilli, which ends up causing inflammation of the stomach walls and/or corrosion. of the same, resulting in the appearance of wounds and consequent gastritis or ulcers, respectively.
Among patients with gastritis and/or ulcers, one of the dilemmas is associated with the foods to consume in order to minimize the sensation of pain and discomfort.
Spontaneous Bacterial Peritonitis - Pathogenesis , Clinical Features & Manage...Jim Jacob Roy
In this presentation , SBP ( spontaneous bacterial peritonitis ) , which is a common complication in patients with cirrhosis and ascites is described in detail.
The reference for this presentation is Sleisenger and Fordtran's Gastrointestinal and Liver Disease Textbook ( 11th edition ).
TEST BANK For Brunner and Suddarth's Textbook of Medical-Surgical Nursing, 14...Donc Test
TEST BANK For Brunner and Suddarth's Textbook of Medical-Surgical Nursing, 14th Edition (Hinkle, 2017) Verified Chapter's 1 - 73 Complete.pdf
TEST BANK For Brunner and Suddarth's Textbook of Medical-Surgical Nursing, 14th Edition (Hinkle, 2017) Verified Chapter's 1 - 73 Complete.pdf
TEST BANK For Brunner and Suddarth's Textbook of Medical-Surgical Nursing, 14th Edition (Hinkle, 2017) Verified Chapter's 1 - 73 Complete.pdf