Curriculum Vitae

1. JIGAR KOTADIYA
SURAT ▪ +91-7874542899 ▪ jigar_kotadiya@yahoo.com
INTRODUCTION
Jigar started his career with Highway engineering consultancy and dedicated crucial 2 year. Jigar has an experience of 2
year in DPR preparation, Highway Geometric Design and Pavement Design. Currently he is looking for an opportunity in
highway design roles in design hierarchy.
SKILLS
• Sound knowledge of performing designs of Highways in Civil 3D Software
• Knowledge of Pavement design, Pavement Materials and Overlay Analysis based on IRC standards and
FWD data using IITPAVE, KenPave and KGPBACK
• Basic knowledge of VISSIM and MX Road
WORK EXPERIENCE
1. Feedback Infra Pvt Ltd. – Gandhinagar July, 2018 – Present
Deputy Design Engineer- Highways
• Project I: DPR for SH and MDRs Under Axom Mala Group 1,2 and 5
Responsibilities:
o Conversion of MX file to Civil 3D file for the reports of alignment.
o Taking out tree offset report along the alignment in Civil 3D.
o Preparation of Reports, Widening Schedule, Road Furniture Plan and Calculation of Road Furniture
Quantities
Softwares: Civil 3D
• Project II: DPR for Two Laning of Yingkiong to Bishing (Porgo Via Gette-Pugging-Likor-Paling-Jido)
Road in Arunachal Pradesh
Responsibilities:
o Generation of Cross-section of the ground at the stream location along the alignment
Softwares: Civil 3D
• Project III: Technical Assistance to Gujarat State Road Development Corporation
Responsibilities:
o Geometric Design of a Flyover with service road at Shravan Chowk on Bharuch-Dahej State Highway
(SH-6), Gujarat
o Preparation of Subassembly according to new IRC Standards
o Preparation of Plan and Profile Drawings
o Vehicle Path Movement of Standard Vehicle using CadTools For Shravan Chowk Junction Improvement
o FWD Survey and Overlay Estimation of Bharuch-Dahej State Highway (SH-6), Gujarat
o Toll Plaza Layout for Bardoli-Surat National Highway (NH-6)
o Review of Overlay Estimation by Benkelman beam survey of Bhuj- Nakhtrana State Highway (SH-42) at
Gujarat
Softwares: Civil 3D, Subassembly Composer, KGPBACK, IITPAVE, CadTools
• Project IV: Four laninng of Jajiwal (Km. 283.500 of NH 62 Nagaur road) to Dangiyavas section - Package-
II (design length 29.806 km ) of Jodhpur ring road (In principally declared NH) in the state of Rajasthan
on EPC Mode under NHDP Phase-VII
Responsibilities:
o Study of various types of alignment options
o Finalization of alignment by interaction with client
o Geometric Design of RingRoad Section-II
o Finalization of Crash Barrier location

2. o Finalization of Toll Booths locations for Closed Tolling
o Preparation of Road Furniture Plan
o Preparation of Detail Project Report and Technical Schedule
Software: Civil 3D
• Project V: Feasibility Report cum Preliminary design for upgradation of NH-158 connecting to
Ras- Beawar-Mandal in the state of Rajasthan (World Bank Funded)
Responsibilities:
o Preparation of Typical Cross Section
o Finalization of retaining Structure locations
o Incorporations of Road Safety Measureso Pavement Design Using IIT Pave
o Finalization of Rain Water Harvesting Pits locations using Civil 3D
o Preparation of Land Acquisition documents
Software: Civil3D, IITPAVE
• Project VI: Detail Design of Jharpokhria - Baripada – Baleshwar Section of NH-5 (Length = 80.6 Km) In
State of Orissa Under NHDP-IV to be Executed on EPC Mode
Responsibilities:
o Preparation of Profile for Minor Junctions
o Preparation of Typical Cross Section
o Review of Junction Improvement and Road Furniture Plan
Software: Civil 3D
• Project VII: Detail Design of Bhopal – Sanchi Section of NH-86 (Length =53.775 Km) In State of Madhya
Pradesh Under NHDP-III to be Executed on EPC Mode
Responsibilities:
o Review of Junction Improvement and Road Furniture Plan
• Project VIII: Consultancy Services for Feasibility Study and Preparation of DPR Improvement and
Up- Gradation of “In-Principle Declared (A) Khambhaliya –Advana – Porbandar Road, (B) Khambhaliya
– Bhanwad – Ranavav (up to Junction of NH-8B), (C) Porbandar –Bhanvad – Jamjodhpur – Kalawad Road
as New National Highway In The State Of Gujarat.
Responsibilities:
o Study of various types of alignment options
o Preparation of Horizontal Alignment of Khambhaliya – Advana – Porbandar highway Section
Software: Civil 3D
• Site Appreciation Survey for pre-bids of various projects
EDUCATION
Sardar Vallabhbhai National Institute of Technology, Surat 2016 – 2018
Master of Technology – Transportation Engineering and Planning with 8.63 CGPA
• Research Thesis entitled - “Utilization of EAF Steel Slag in Open Graded Friction Course”
• Attended 12 days GIAN Course of “Building Resilient and Sustainable Roadway Infrastructure” conducted
During
12-23 December, 2016 by Dr. A. Veeraragavan, IIT Madras and Prof. Rajib Malick, Worcester
Polytechnic
Institute, USA at IIT Madras
• Consultancies During M.Tech:
o Traffic Study and Junction Improvement Scheme of Sahara Darwaja, Surat
o Marshall Mix Design of DAC for Ahmedabad Airport
o Design of Flexible, Rigid Pavement and overlay design by Benkelman Beam Deflection method for SH-
62 and MDR-106, Rajasthan
o Signal Design for Bardoli Intersection on SH-88, Bardoli, Gujarat

3. Birla Vishwakarma Mahavidyalaya, Vallabh Vidyanagar 2011 – 2015
Bachelor of Technology in Civil Engineering with 7.03 CGPA
INTERESTS AND ACHIEVEMENTS
• Academic/Personal Achievements –
o 2nd Prize In “Project Expo” At BVM-2015; BVM, Vallabh Vidyanagar for experimental study on
“Improvement of Bearing Capacity of Loose Soil by Different Soil Replacement Techniques”
• Extra-Curriculum Achievements –

4. o Runners up in GTU Inter-Zonal Football Tournamnent,2013 at SCET, Surat.
o Runners up in Zest Football Tournament, 2013 at COEP, Pune.
o Represented SVNIT Football Team at Inter- NIT Summit- 2016 at NIT, Agartala.
o Represented Surat District Football Team in Subrato Mukrji Cup ,2008 at U-14 level.
• Interests –
o Highway Geometric Design
o Transport Planning
o Football
I hereby declare that the information provided above is true.
DATE: SIGNATURE: