Steven Andrew Watt has over 30 years of experience in electrical, instrumentation, and systems maintenance. He is currently a Systems Engineer for KCA Deutag in Angola, where he performs preventative and reactive maintenance on offshore drilling systems and equipment. Prior to this, he worked as a Senior Electrician for KCA Deutag in the UK. He has extensive experience maintaining drilling equipment from manufacturers such as National, Siemens, Allen-Bradley, and others. Watt holds an HNC in Mechatronics and various technical certifications.

1. CIRRICULUM VITAE
Steven Andrew Watt
19 Boyne Street, Whitehills, Banff, Aberdeenshire, AB45 2ND
stevenawatt@aol.com
DOB.25-09-67
Tel: 01261 861423 Mobile: 07854211333
Experience
Company - KCA Deutag (BBLT Angola)
Period - December 2012 to date.
Position - 5th Generation offshore Systems Engineer
Duties - Preventative and reactive maintenance of all systems, electrical and instrument equipment within
the drilling scope. Calibration, testing and installation of instrumentation.
I am familiar with all systems pertinent to that scope, such as Siemens S7 & Allen Bradley PLCs,
Vacon VFDs, cLink cyber SCADA systems, fibre optic, CCTV and TCP/IP systems.
I am also familiar with HVAC and Drilgas systems.
Maintain critical spares and sourcing/purchase of parts for projects.
The main drill floor equipment I have experience with on this platform are TD (National PS2-
750A), Drawworks (National SSGD-4600-63), and Mud pumps (National 14-P-220). Also a CAT
3516B emergency generator.
As well as fulfilling the systems engineers duties I also stand in for the Senior electrician as and
when required.
Company - KCA Deutag (Britannia)
Period - April 2006 to December 2012.
Position - Offshore Senior Electrician (Cat B CEP)
Duties - Preventative and reactive maintenance of all electrical and instrument equipment within the
drilling scope. I am familiar with all systems pertinent to that scope, such as Seimens S5,
Mitsubishi PLCs, Bauteil SCRs, GEC Alsthom Gemstart 3, ICIS intelligent motor control, Varco
and Maritime Hydraulics equipment. Liaise with 3rd
party vendors and ensure installation safety
procedures are followed. Perform supervisor stand in duties when required.
The main drill floor equipment I have experience with on this platform is DDM (MH-650-DC-
2M), Drawworks (National 1625E), Mud pumps (National 14-P-200).
Company - Aker Kvaerner MH UK Ltd
Period - August 2005 to April 2006.
Position - Service Engineer (Multi-disciplined).
Duties - To maintain and repair all drilling package equipment supplied by Maritime Hydraulics. This
required mechanical and electrical fault finding and repair on equipment such as Hydraulic and
electrical Derrick Drilling Machines, Pipe handling equipment, Access baskets etc.

2. CIRRICULUM VITAE
Company - Pelikan Ltd
Period - October 1997 to August 2005.
Position - Electrician then Engineering Team Leader.
Duties - Electrical and instrument instalation, maintenance, calibration and repair of production machinery
and ancillary plant such as Plastic injection moulding equipment, Robotic equipment, Coating and
slitting machines, ultra sonic welders etc. Supervise the installation and commissioning of new
equipment. Supervise maintenance team and ensure effective maintenance routines are developed
and instigated and all company safety procedures are followed.
Company - Pelikan Ltd
Period - April 1985 to October 1997.
Position - Quality Assurance Inspector
Duties - Ensure all incoming raw materials meet with technical specification. Liaise with vendors
concerning quality issues. Develop and maintain test equipment calibration procedures to meet
with BS5750 and ISO 9001 requirements. Investigate and rectify quality issues with finished
products.
Formal qualifications
 HNC Mechatronics Aug 2000
 SVQ level 3 Engineering maintenance Oct 2002
Certificated Courses
 Siemens S7 Service Levels 1, 2 & 3 2014 - 2015
 TCP/IP networking September 2013
 HV/LV switching (C & G) June 2012
 CompEx certificate of core competence in the preparation,
installation and inspection of equipment in hazardous areas,
(Ex d, n, e, p and i systems). July 2011
 17th Edition IEE Regulations (C & G)
 Ex 1st line maintenance and motor bearing replacement
 Seimens S5 System 1 October 2006
 Seimens S5 system 2 September 2007
 Mitsubishi PLC systems introduction and advanced. November 2005
 Sparrows Rexroth hydraulics October 2005
 MIST April 2012
 Safe working at heights October 2005
 Safety observation systems September 2005
 Scaffold tower erection March 2005
 Abrasive wheel regulations June 1998
 BOSIET (OPITO) including EBS January 2013