1. David John Kime
Time served Electrical / Control Engineer with 24 years experience working within the heavy Industrial sector of
manufacturing and in Offshore Oil & Gas. Very Health & safety conscious and have been fortunate enough to work
within businesses that regard Health & Safety as the number one priority.
Eg:
• Highly competent in the field of Electrical Engineering and self-motivated
• Developed from Electrical apprentice to Maintenance Manager
• Ability to communicate effectively throughout all levels of the business
• A proven problem solver, who has the ability and knowledge to work alone, under own initiative or as part of an
effective team, however not afraid to ask if in any doubt.
,
• Developed and executed Multiskilling training program to gain NVQ level 3 in Electrical / Instrumentation for all
maintenance personnel, 100% pass rate achieved.
• Installation of 11kv remotely switched Vacuum circuit breakers replacing manually operated oil circuit breakers
(Health & Safety), £250,000 budget.
• Project Managed installation of four Boiler Burner upgrades to achieve improved Nox emission levels
(Environmental), £550,000 Budget.
• Lead Energy team implementing many cost saving projects adding up in total to an annual saving in the excess of
1 million pounds.
• Leader of a multi-disciplined team that developed and implemented the site Isolations system. Followed by
delivering Isolation system training to all site personnel.
• Installation of Site compressors with the impact of much increased reliability and a £22,000 / annum Energy
saving. Project delivered on time and within budget.
2014 – Present Offshore Maintenance Electrical Technician – Vantage Card No: 1475571
Petrofac - Enquest Producer FPSO
• 2/3 Rota
• Senior Authorised Electrical Person (SAEP)
• Isolating Authority – Electrical (use of ISSOW)
• Daily Routines & Weekly / Monthly PM ‘s on following equipment: Diesel Generators (470kw &
900kw), Uninterruptable Power Supply (UPS) units, Small Power & Lighting distribution, Diesel
Fire Pumps, Motor Control Centres, Heating, Ventilation & Air Conditioning (HVAC), AC & DC
Motors, Ex Equipment.
• Assisting Commissioning Engineers & Specialist Vendors on Equipment listed above.
• Portable Appliance Testing
• Emergency Response Team Member
• Operating & Synchronising Electrical distribution equipment i.e. Diesel Generators
• Emergency First Aid Trained
Profile
Experience
Key Achievements
2. 2008-2014 Maintenance Manager / Electrical Engineer
Georgia Pacific GB Ltd / SCA Hygiene Products Tissue Ltd, Stubbins Paper Mill
Maximise machine availability and reliability through modern maintenance techniques and to seek
continuous improvement.
• Support given to Condition Monitoring Engineer to ensure decisions made to make repairs were
within the best interest of the business.
• Responsible for annual departmental appraisals to identify individual and departmental
development / improvement opportunities.
• Chaired monthly departmental Health & Safety meetings
• Developed and implemented Risk Assessment database
• Continually encouraged the importance of carrying out tasks to the correct quality & specification
to ensure “Right First Time” work ethic.
• Ensured timely response by all to Health & Safety and Environmental related audit actions.
•
2001 - 2008 Electrical & Control Engineer
Georgia Pacific GB Ltd, Stubbins Paper Mill.
Responsible for site Electrical requirements, standards and continuous improvement.
• Developed and implemented Motor Greasing program to improve reliability
• Worked with Reliability Engineer and external contractor on Thermography survey program,
improved reliability and Electrical safety
• Planning, preparation and execution of Planned / Preventative maintenance shutdowns ensuring
all work was completed to the correct specification / quality, on time and within agreed budget.
• Installation of many variable speed drives and reduced speed motors resulting in significant
energy savings on Pumps and agitators.
• Timely response to breakdown situations, including out of working hours, ensuring machine
downtime is kept to minimum.
• Maintenance program established for 11kv site Electrical distribution system including
development of network switching schedules and liaising with Electricity supply Engineers.
• Management of departmental budget ensuring costs are in control and prioritization is made as
necessary.
• Responsible for Fixed Wiring system Inspection & Testing and Portable Appliance testing
programs in accordance with the Electricity at Work Regulations 1989 and 17th
Edition Wiring
Regulations BS7671.
1998 - 2001 Electrical / Instrumentation Maintenance Supervisor
Biwater Pipes & Castings Ltd.
Responsible for site Electrical requirements and Electrical / Instrumentation department.
• Responsible for the day to day planning & scheduling of the Electrical/Instrumentation
department.
• Continuous development of Planned and preventative maintenance in accordance with
legislation and Best practices.
• Timely response to breakdown situations, including out of working hours, ensuring machine
downtime is kept to minimum.
• Maintenance program established for 11kv site Electrical distribution system including
development of network switching schedules.
1997 - 1998 Electrical / Instrumentation Maintenance Shift Charge-hand
Biwater Pipes & Castings Ltd.
Responsible for Electrical / Instrumentation department on shifts
• Supervision of shift, ensuring completion of scheduled task and prioritization of unplanned work.
3. • Carrying out planned and preventative maintenance tasks and providing feedback on further
work/ improvement opportunities.
• Providing good quality shift report, accurate and concise, to ensure good lines of
communications between shifts.
• Timely response to breakdown situations, ensuring machine downtime is kept to minimum.
1993 - 1997 Shift Maintenance Electrical Technician
Biwater Pipes & Castings Ltd.
Responsible for breakdown cover and carrying out maintenance on site Electrical / Control machinery /
equipment
• Monitor, modify programs and replacement of components on Programmable Logic controllers.
• Monitor, modify parameters and replacement of motor variable speed drives.
• Interpretation of Electrical / control schematic drawings.
• Maintenance and installation of Electrical/Control equipment in line with legislation.
• Timely response to breakdown situations, ensuring machine downtime is kept to minimum.
• Portable Appliance Testing
1989 - 1993 Apprentice Maintenance Electrical Technician
Qualifications
1996 – 2000 2.1 BEng Honours Degree in Electrical & Electronic Engineering Derby University
1996 – 1998 H.N.D. in Electrical & Electronic Engineering Derby University
1994 - 1996 H.N.C. in Electrical & Electronic Engineering Chesterfield College
1993 – 1994 H.N.C. Bridging course (2nd
Year of O.N.C.) Chesterfield College
1989 – 1993 City & Guilds in Electrical & Electronic Engineering Chesterfield College
1989 – 1993 EITB Apprenticeship in Electrical & Electronic Engineering Chesterfield College
Achievements
1997 / 98 BEng Student Award for the best Stage Performance
1996 Electrical Engineering Apprentice of the Year
Training
26/11/15 Siemens Simocode Pro Training Siemens
28/07/15 Integrated Safe System of Work (ISSOW) – Level 2 Petrotechnics
15/06/15 Emergency First Aid at Work (for Technicians) Aberdeen First Aid School
09/06/15 Portable Appliance Testing (City & Guilds) Faraday Centre
08/05/15 BS7671 17th
Edition Wiring Regulations (City & Guilds) ASET
08/04/15 Helideck Assistant Initial Training Falck
06/03/15 Maximo 7.5 Maintenance Management System Training Entra
Education
4. 07/01/15 Compressed Air Emergency Breathing System (CA-EBS)
Initial Deployment South Tyneside College
12/12/14 COMPEX EX01, EX02, EX03, EX04. Cert No: 47891 ASET
04/12/14 C & G High & Low Voltage Systems Protection (Protection Relays) ASET
28/11/14 Electricity at Work Regulations 1989 EPIT
14/11/14 Responsible Electrical Person Training People Factor Consultants
25/10/14 Combined HDA Helideck Emergency Response Team Member
& Offshore Emergency Response Team Member Training Petrofac
20/10/14 C & G HV/LV Switching Procedures for Oil, Gas & Marine Operations ASET
21/09/14 Authorised Gas Tester Training Level 1 Gas Testing for Confined
Spaces Cresent
18/09/14 Safe Entry into Medium Risk Confined Spaces Training Mines Rescue Marine
11/04/14 Basic Offshore Safety Induction & Emergency Training (BOSIET) Petrofac
(including HUET & EBS)
11/04/14 Additional Safety & Emergency Training for the Norwegian Sector Petrofac
08/04/14 Offshore Oil & Gas Industry Minimum Safety Training (MIST) Petrofac
13/03/14 Offshore Medical Certificate – No: 2004/740
03/2009 NEBOSH Level 3 Certificate in Occupational Health & Safety
04/2010 Radiation Protection Supervisor Public Health England
07/2013 Radiation Protection Supervisor Refresher Public Health England
03/2010 CE Marking & Machinery Safety Pilz
03/2003 ACS600 Variable Speed Drive Training Abb
Danfoss Variable Speed Drive Training Danfoss
08/2006 Control Logix PLC Rockwell
11/2011 Scaffold Awareness
11/2012 Managing Contractors Aviva
05/2012 Confined Space Entry Management & Supervision ESS Safeforce
09/2006 Management of Lifting Operations Lifting Gear Hire
1996, 1999 & 2002 High Voltage Operational Safety Training course
1997 Siemens S5 PLC Training course
1996 Control Techniques Mentor 1 & 2 DC Drives Training course
1998 Industrial Hydraulics Training course
5. 2010 & 2013 Risk Assessment Training course
2000 BS 7671 16th
Edition Wiring Regulations
AC Motors – Induction, Slip Ring, Servo – 1 & 3 phase – 240v, 415, 690v & 3.3kv – 0.37kw to 700kw
DC Motors – up to 610kw
AC Variable Speed Drives – Siemens Midi & Micromaster, Danfoss, Abb ACS 600 & 800, Abb Sami Star, Rockwell
Powerflex
DC Drives – Control Techniques – Mentor 1 & 2, Lynx & Cheetah, Allen Bradley Powersil, Allen Bradley E1395
Motor Starters – Multiple motor control centres, Direct on line, Star / Delta, Rotor Resistance, Auto Transformer
Transformers – up to 11kv, 3MVA
Programmable Logic Controllers – Allen Bradley, Siemens, Mitsubishi, Square D
Air Circuit Breakers – up to 3200A – Merlin Gerin Masterpact, Abb Sace, GEC MPact.
11kv Circuit Breakers – Brush VSI oil & vacuum, Abb SF6
Overhead Travelling Cranes
Gas Burner Systems up to 10MW
Fire Alarm systems
Emergency Lighting
CCTV
Electrical Distribution – Merlin Gerin Distribution boards & circuit breakers
Electrical Fixed wiring Inspection & Testing
Compressors – Ingersol Rand
Issue & Control of Permits – Electrical, Confined Space, Hot work, Excavation & Line Break
Risk Assessments & Method Statements
Isolations system
Service Contracts
Purchasing of Parts & services
Management & Supervision of Electrical / Instrumentation Dept
Supervision & monitoring of external contractors
Planning, executing & reviewing maintenance planned shutdowns
Knowledge & Skills