JameenHabibuRahman is a senior instrumentation technician with over 9 years of experience in instrumentation and control systems. He is currently located in Jubail, Saudi Arabia and is seeking a position utilizing his skills in instrumentation, automation, and team leadership. Rahman has extensive experience working with DCS, PLC, and SCADA systems from manufacturers like Siemens, Yokogawa, and Invensys. He is proficient in various instrumentation including transmitters, control valves, flow meters, and more. Rahman aims to contribute his technical and supervisory experience to maintenance, commissioning, and new project work.
COVER LETTER
I am writing to outline my extensive experience and successful track record as an Electrical and Instrument Construction/Maintenance Supervisor. I believe I possess the skills, qualifications and vital experience necessary to make a very significant contribution to your operation.
My extensive experience in chemical, petrochemical, thermal power plant, nuclear power plant, fertilizer plant and cement industries, and construction industry I have been involved with installation, maintenance, testing, troubleshooting, in E & I and repairing and maintenance of electronics system, worked on power electronics, worked on electrical control system, worked on frequency drive, soft starter,PLC,DCS,foundation field bus system, security system, structured cabling networking, surveillance system, fire and gas system, hazardous area instrumentation I am looking forward to have a great time with your company
Responsibilities: E&I QA/QC
Responsibilities for Field Inspection as per Inspection Testing Plan (ITP’s) Related (E&I)
Jobs.QA/QC with the help of specification, drawings.
Inspection for Material Receiving related Electrical, Instrument as per Indent, Delivery
Note.
Inspection for Cable Laying (E & I) in Cable Trays, Trenches as per cross-sectional
drawings.
Inspection for Cable Trays (E&I) Installation (Perforated, Ladder, Mesh) as per drawing.
Responsible for all Red Marks/As Built drawing as per site modification.
Inspection for Lighting Installation as per circuit diagram, Panel Installation,Transformer
installation.
Inspection for Heating Tracing cables and Testing.
Having Good Knowledge of (NEC) National Electrical Code.
American Petroleum Institute (API ) Standards
IEC- international ELECTROTECHNICAL Commission Standards.
Inspection for the Installation of MCT’s.
Inspection for Lightning Protection (Lightning Arresters).
Inspection for EARTHING Cable Laying, CAD Weld - Exothermic Weld joints,
Earth Bus Bar, EARTHING Test.
Inspection for Motor Installation, Resistance/IR test & Motor torque test.
Inspection for Cable Continuity/IR, Cable termination, EARTHING test.
Prepare the NCR, CAR, TQ, ITP, and Method Statements & RFI’S.
Complete QA/QC Documentation as per Project specification.
Inspection for calibration of PI, PDIT, PT, TT, TE, FT, LT.
Functional Test of Ultrasonic Transmitters, LSL, LSH, LSHH, AT.
Inspection for Field Instrument Installation (PT,FT, LT, Control Valves as per Hook up drawing)
Inspection for Impulse Line Leak test.
Inspection for JB’S Installation, Panels, Cabinets Installation.
Preparing the complete Loop Folders like(DI,DO,AI,AO,RTD for Loop Checking Pre-
Commissioning with the attachments of Instrument loop package index, Functional loop test CR,
Material Receiving Calibration CR, Instrument Installation CR Instrument index, instrument Loop
Diagram & P& ID’S.
Responsible for clear the Punch Points.
Prepare the Final Dossier as per client HOS and Hand over to Mechanical Completion
Department (MC)
Final Walk Down of Hand over System (HOS) with Client.
COVER LETTER
I am writing to outline my extensive experience and successful track record as an Electrical and Instrument Construction/Maintenance Supervisor. I believe I possess the skills, qualifications and vital experience necessary to make a very significant contribution to your operation.
My extensive experience in chemical, petrochemical, thermal power plant, nuclear power plant, fertilizer plant and cement industries, and construction industry I have been involved with installation, maintenance, testing, troubleshooting, in E & I and repairing and maintenance of electronics system, worked on power electronics, worked on electrical control system, worked on frequency drive, soft starter,PLC,DCS,foundation field bus system, security system, structured cabling networking, surveillance system, fire and gas system, hazardous area instrumentation I am looking forward to have a great time with your company
Responsibilities: E&I QA/QC
Responsibilities for Field Inspection as per Inspection Testing Plan (ITP’s) Related (E&I)
Jobs.QA/QC with the help of specification, drawings.
Inspection for Material Receiving related Electrical, Instrument as per Indent, Delivery
Note.
Inspection for Cable Laying (E & I) in Cable Trays, Trenches as per cross-sectional
drawings.
Inspection for Cable Trays (E&I) Installation (Perforated, Ladder, Mesh) as per drawing.
Responsible for all Red Marks/As Built drawing as per site modification.
Inspection for Lighting Installation as per circuit diagram, Panel Installation,Transformer
installation.
Inspection for Heating Tracing cables and Testing.
Having Good Knowledge of (NEC) National Electrical Code.
American Petroleum Institute (API ) Standards
IEC- international ELECTROTECHNICAL Commission Standards.
Inspection for the Installation of MCT’s.
Inspection for Lightning Protection (Lightning Arresters).
Inspection for EARTHING Cable Laying, CAD Weld - Exothermic Weld joints,
Earth Bus Bar, EARTHING Test.
Inspection for Motor Installation, Resistance/IR test & Motor torque test.
Inspection for Cable Continuity/IR, Cable termination, EARTHING test.
Prepare the NCR, CAR, TQ, ITP, and Method Statements & RFI’S.
Complete QA/QC Documentation as per Project specification.
Inspection for calibration of PI, PDIT, PT, TT, TE, FT, LT.
Functional Test of Ultrasonic Transmitters, LSL, LSH, LSHH, AT.
Inspection for Field Instrument Installation (PT,FT, LT, Control Valves as per Hook up drawing)
Inspection for Impulse Line Leak test.
Inspection for JB’S Installation, Panels, Cabinets Installation.
Preparing the complete Loop Folders like(DI,DO,AI,AO,RTD for Loop Checking Pre-
Commissioning with the attachments of Instrument loop package index, Functional loop test CR,
Material Receiving Calibration CR, Instrument Installation CR Instrument index, instrument Loop
Diagram & P& ID’S.
Responsible for clear the Punch Points.
Prepare the Final Dossier as per client HOS and Hand over to Mechanical Completion
Department (MC)
Final Walk Down of Hand over System (HOS) with Client.
1. PERSONAL AND CONFIDENTIAL
Senior instrumentation technician
JameenHabibuRahman
Mob.:+966 572466450
Email: jameendiamond86@gmail.com
Skype:jameen85
Career Objective
I am looking for a good position in the field of instruments and automation in a prestigious company
where previous skills and capabilities can be put to efficient use. I possess effective organizational skills
and the ability to supervise a team and develop the final output.
Personal Details
Profile: Male, 30, Married, Indian, Muslim
Employer: Saudi Arabian Kentz Co. Ltd.
Current Location: Jubail – Saudi Arabia
Summary ofSkills:
About 9 years of experience in the field of instrumentation and control systems in detailed
maintenance, commissioning and development co-ordination of instruments and control systems
Configuring and faults diagnosis of DCS, ESD, SIS, PLC, ProfibusCommunication and Control
Loops.
o DCS : Invensys(Foxboro), PCS7 v6.0 Siemens and Centum CS3000 Yokogawa
oESD : Invensys(Foxboro)
oSIS : Centum CS3000 Yokogawa
o PLC : Siemens simatic S7 200,300,400
Installation, calibration and loop checking of the field instruments (Emerson Rosemount, ABB,
Enders& Hauser, Bentley Nevada, Honeywell,Yokogawa ...)
Maintenance and calibration of the control valves ( Pneumatic, Part turn, MOV, NRV,.....) of Weir
Blackborough, Flowserve, Bray, Airtorque, Copes-Vulcan, Valtek, Masoneilan, Aumamatic,......
Experienced in flowmeters configuring (vortex, Coriolis, electromagnetic, orifice plate, turbine,
variable area) of ABB, Rosemount, Krohne, +GF+…
Experienced in level transmitter’s configuring (GWR, Ultrasonic, DP, DP interface level) of ABB,
Rosemount, Krohne, +GF+…
Designing, Implementing and Commissioning of new control loops as per site requirements.
Review of control philosophy, P&I diagrams, function diagram, cause & effect diagrams,
instruments list, flow chart
Preparing master data sheet for PM schedule; ensuring safe and efficient performing of CM.
Preparation of Loop test and Function test folders as per client’s requirement.
2. PERSONAL AND CONFIDENTIAL
Technical Support for the instrumentation team.
Spares balance investigation and inventory control for all instruments’ spare part
EducationalQualifications:
2006........Diploma in Electronics and Communication Engineering (D.E.CE), State boardKilakarai......... India
2003……SSLC, St. Joseph’s Higher Secondary School, State board.......India
Organizational Experience
Organization: SADARA (DOW CHEMICAL COMPANY), Jubail, Saudi Arabia
Employer: Saudi Arabian Kentz Co. Ltd.
Duration: July 2014 to till date.
Organization: SIPCHEM, Jubail, Saudi Arabia
Employer: Saudi Arabian Kentz Co. Ltd.
Duration: May 2008 to Dec 2011.
Project: CHENNAI PETROLEUM LTD, Chennai, India
Employer: L&T Co. Ltd.
Duration: Jan 2012 to March2014.
Organization: LUCAS-TVS, Chennai, India
Employer: Lucas-TVS.
Duration: May2006 to April2008.
Responsibilities:
The nature of my job Includes maintenance for all the instruments related loops through DCS, SIS
and AB PLC STUDIO Rs logix 5000 software
Bench and field calibration, loop checking, interlock checking commissioning and preventive and
corrective maintenance activities of all process control instruments
Commissioning and calibration of all type of pneumatic and electronic instrument loop checking
panel wiring
Maintain and troubleshooting automation machinery field instrument’s proximity sensor solenoid
operator valve vacuum transducer ,photo eyes, scanner, and capacitive inductivesensors
Currently work with DOW SPECIALTIES LTD maintain RO MEMBERANE ELEMENTPRODUCTION
UNIT maintain the machineries and troubleshooting the AB PLC studio logix 5000 and
configuration VFD drives, SERVO DRIVE,AND MAINTAIN PNEMUMATIC actuators and it operation
Calibration commissioning preventive and maintenance activities of almost all type of process
control instruments fault finding and troubleshooting activities of various process control gas
detection and machinery control instrument in the oil and gas production processing plant
MONTHLY PM DOW RO FILMTEC MEMBERANE PRODUCTION PLANT has shut down and
preventive maintain INSTRUMENTS AND Pneumatic actuators, sensors, AC and DC DRIVES.
3. PERSONAL AND CONFIDENTIAL
machinery such as APM, AMEC, FINISHING LINE, TRIMMER, INSERT CAP, SPINWELD, WINDER,
CHAMPER
Carried out PM, CM for field instruments as per maintenance procedure.
Experienced in shutdown related Instrumentation work.
Field and Bench calibration for Smart Pressure, Flow, Level and Temp. Transmitter.
Experience in handling Bently Nevada 3300XL instrument like proximity sensors and transmitter.
Assistance of coordination of shutdown activities and break down (call out job).
Preparing and confirming relevant report and to maintain proper record and file.
Confirming the DCS, SISand PLC graphics for both Loop and Function test.
Checking the Loops and Function test folders and making necessary correction and responsible
for package acceptance by the client.
Planning required up-gradation for instruments to achieve production quality, Safety and cost
minimizing.
Programming PLC by Ladder Diagram, and hardware troubleshooting
Trainer at the company training center
Reporting periodically to Manager
Troubleshooting the totally integrated automation TIA from Siemens (DCS PCS7 v6.0 + PLC
simatic S7 400 + SCADA WINCC) software and hardware.
Maintenance activities for FM 200 fire extinguisher.
Leading a team of 17 instrument technicians for commissioning activities.
Basic troubleshooting of DCS& ESD- FoxboroInvensys for both Foundation fieldbus and HART
system.
Maintenance & calibration of transmitters PT, LT, TT, DPT (Rosemount, Foxboro, ABB......)
Maintenance & calibration of Bently Nevada 3500 measuring system (Acceleration, Velocity,
Thrust, Vibration ...)
Maintenance and calibration of flowmeters(vortex, Coriolis, electromagnetic, orifice plate, turbine,
variable area) of ABB, Krohne, Rosemount …
Maintenance and calibration of pneumatic control valves (Blackborough, Copes-Vulcan, Valtek,
Masoneilan) and motorized valves (Emerson)
Reporting to the Commissioning Manager on the progress of Project activities.
Supervising contractor personnel working along with him.
Responsible for all the Instrument technician and carryout the Instrument loop checks and
troubleshooting, Calibration of all type of Transmitters.
I have experience in handling Standard Plant Safety Procedures & Plant Maintenance.
SWP (safe work permit), Training Safety, Health & Hazard Communication and Lock out Tag out.
IT Skills
Operating systems : Windows XP, 7, 8, NT, 2008 Server
Programs : Office Tools , AutoCAD
Internet : Very good
4. PERSONAL AND CONFIDENTIAL
Programming languages : Visual Basic, C++
PLC Programming: Ladder Diagram
Control Programs : PCS7 v6.0 Siemens & CS3000 DCS,WINCC& IFIX SCADA
PC Networking : Very good
PC HW maintenance: Experienced
Languages
English: Fluent; read, write and speak
Tamil : Fluent; read, write and speak
Urdu : Speak
Hindi : Speak
PassportDetails
Passport No : G1451256
Place of Issue : TRICHY
Date of Issue : 21/12/2006
Date of Expiry : 20/12/2016
___________________________________________________________________________________________________
Declaration
I hereby declare that all information stated above is true to the best of my knowledge.
Yours Sincerely,
Date:
Place: Jubail
(JameenHabibuRahman)