1. Resume for: Service Engineer
R.JOSEPH JESU RAJA
Home Address
284-C, Vimala Lane,
Raja cross Street,
Kanmai Karai,
Madurai – Tamilnadu,
India.pin- 625016.
Emails : jose6112004@rediffmail.com,
: roym_joseph@yahoo.com
Skype : royappan_joseph
Mobile Phone No: +91 90037 36502
Optional mobile no: +91 98949 02977
CAREER OBJECTIVE
Ability to Familiarity with application of the HSE Management System with PTW
Systems operate HMI,DCS for the process commissioning operations.
Assists in planning annual shut down and major equipment turnarounds and carries
out complete overhaul of electrical equipment reassembles and tests equipment in
accordance with requirements or tests schedules.
Strict adherence to plant safety Protocols & Good housekeeping
Contribution to continuous improvement by providing suggestions, initiate
modifications to improve reliability of Equipment/Process, Improve Safety,
Improve Maintainability, Reduce Cost,
Active participation in production and Perform Technical investigation to determine
the root cause of failure Interact closely with the Planning Team and ensure smooth
operation.
Maintain/Update the job completion records, Maintain history cards for the
electrical equipment.
Responsible for the support of Company Safety, environment and Quality policies
and programs, and carrying out specific duties and responsibilities related to his job
as spelled out in Management system documentation policies, procedures, local
documentation, Management System Manual, Safety Manual and other related
documents.
Adhere to the Work management procedures and develop the company and Train
national employees.
VALID CERTIFICATES FOR OFFSHORE AND ONSHORE
*Sea Survival (BOSIET) OPITTO, STCW2010.
*Hv/Lv Switching operator Certificate
*Offshore Medical,(OGUK)
*fully familiar the Ex zones classification and IP
*Experienced in PLC, SCADA, DCS, and HMI.
*familiar the Computerized Maintenance Management systems (CMMS)
QUALIFICATION
TOTOL EXPERIENCE: 23 Years
2. Resume for: Service Engineer
EDUCATIONAL QUALIFICATION
1, DIPLOMA IN ELECTRICAL ENGINEERING
Karnataka State Open University.(KOSU)
2, NTC2 IN ELECTRICAL TECHNOLOGY Electrical installation and servicing
Engineering- Collageof ITE-Bedok, Singapore(Government of Singapore).
3, NTC3 IN ELECTRICAL TECHNOLOGY Collageof ITE-Jurong East, Singapore
(Government of Singapore).
4, VOCATIONAL TRADE CERTIFICATE IN ELECTRICAL (NCVT) Loyola
Poly Tech collage(Government of India,Madurai)
5, ELECTRICAL COMPATENCY CERTIFICATE. (Hv and Mv and Lv Voltage)
“C” License Issued by Government of Tamilnadu.(India.)
6, ELECTRICAL INSTALLATIONS CERTIFICATE
St. Francis technical institute(Mumbai-India...)
ADDITIONAL QUALIFICATIONS:
Windows XP, Windows & Dos Operating System
MicrosoftPower point, MS- Officeand Word
AutoCAD millennium2000
Languages Known to Speak and Write
Speak and Write : Tamil,English
Speak : Hindi,Arabic
Professional Experience
Right now I m working in Economic Engineering Company in India
Position: Electrical Engineer.
Clients: TNEB, ELGI and V-GREEP, Fenner, Industrial Group of Company’s
Details of Experience
Construction of Electrical Equipments, instruments, Motors, Transformers and DCS, PLC,
SCADA systems Installation Commissioning related substation equipment and
Switchgears, installations operations, Maintenance and troubleshooting of high voltage
Transformers and switch gears, motors and Starters and inverters, Batteries related control
circuits in industrial sectors. Also transformer oil testing, high pot testing and Trouble
shooting and repair of Transformer Control system, and fire alarms Repair and service of
electronic-equipment and Telephone, PA (public announce system) Fire sensors and
emergency Generators. Maintaining with proper and safe work procedure.
Employer: STG-DP3,
Vessel Name: Jascon-28, DP3 Accamandation vessel- Nigeria
3. Resume for: Service Engineer
Position : Electrical Engineer
Duration : From December 2/2014 to March 30/2015
Installation and startup Power Generator, Electrical Thruster, Diesel Engine Thruster, Ups,
Hvac Systems, AC, DC Motors maintenance and repair also Testing of all msb, motors
control circuit, production relays trouble shooting and repairing all the fire alarm smoke
and gas detection systems maintenance and additional functions checking in the facilities
communication net working doom installation and commissioning and functions tuning
activities in well Experience.
Employer : Cal dive International (USA)
Vessel Name: Sea Horizon Rig/Derik and pipe laying vassal
Rotation : 3month Maintenance job
Position : Electrical Engineer and Tensioning machine operator.
Client : ONGC Worked as a Senior Electrician in Pipe Laying Barge in Gujarat offshore
Duration : From January 2/2013 to may 5/2013
Details of Experience
Maintaining the Power Generators, motors and inverters,Battery’s, Maintenance and
routine testing of fire sensors and emergency batteries. Power generation synchronizing
and distribution, blackout restoring. Maintaining and repairing of electrical deck crane and
overhead crane electrical motors and control system. Jacking motors torque check and
equalizing, D.C. Brake operations checking and maintenance. Power and lighting
arrangements for Jacket &Platform piling, welding and cementing Also giving training for
the trainees and guide the technicians for proper and safe work procedure.
Employer: Subsea7
Vessel Name: Antares Pipe Laying Barge
Position : Senior Electrical Technician in pipe laying department
Rotation : 35/35 Rotation job
Client : Chevron-ESCRAVOS GAS PROJECT PHASE ‘B’,
: Port hare court Exxon Mobile Platform pipe lay project.
Duration : From 1st November- 2011 to January 2013
Details of Experience in Subsea7
Performed installation, commissioning and Daily inspection and trouble shooting and repair
all the electrical systems and gear to inspect across the complete power generators and
barge also production platforms of new and repaired electrical equipment and Maintenance,
well heads in the offshore. Tested and validated the rigs electrical systems on a regular
basis and process required situations For Repaired, tested, troubleshoot, installed and
connected power supplies appliances, switchgear and voltage regulators and all type of
relays also solid state relays, all the type of AC motors of centrifugal pumps, compressors,
sea water pumps, Chain hoists and winches …etc., and their control circuits.
Troubleshooting of all electrical equipment’s, power and lighting panels. Preventive and
break down maintenance of D.C. and A.C. Motors with. Their related control instruments
trouble shooting and repairing and servicing of air conditioners and Battery charger, UPS
and solar power panels and lights and equipments installation and trouble shoot and repair
for unmanned platforms. HVAC System Installation and trouble shoot repair in the barge as
well as process platforms Worked as direct staff position in ‘SubSea7’ in Antares pipe lay
Vessel in Nigerian offshore in Chevron oil gas field, also worked in port Harcourt Exxon
4. Resume for: Service Engineer
Mobile platform pipe lay project. Pipe lay operation’s and all electrical and instrument’s
maintenance and trouble shooting and modifications of field requirements Winches, Chain
Hoists, motor and starters maintenance of pipe Tensioners, pot testing all the portable
equipments
Employer: WNPOC (Supply with Dietsmann) White Nile petroleum operating company. :
Client : WNPOG- south Sudan oilfields (PETRONAS MALAYSIA)
Position : Senior Electrical Team leader
Duration : From 19th May- 2006 to 5th Feb -2011
Rotation : 35/35 Rotation
Responsibility Details of Experience.
Maintaining of Power plant (11/33kv) diesel combined with crude mode turbines, using
strep up/down substations 33kv/11kv/6.6/.430kv Systems, and RMU/CSS (Ring Main
Unit) Substations and soft starters, VFD, VSD Also Installations and commissioning and
troubleshoot of Hv motors6.6KV,compressors and water injection plants for well heads-
Heat Tracing systems and Ro-plant, desalination plant installation and maintenance and
running for back wash and membranes quality checks and better production yielding for
CPF and temporary installation for rigs and wellheads.
Especially attending break down maintenance, corrective maintenance, periodic
maintenance in this facility and experience in construction and commissioning, inspection
and as well us using measuring equipments (ex) high pot, meggering, phasing, and
continuity, ph sequence and Transformer oil dielectric strength Testing as per IEC
standards of commissioning and Start-up, and maintains of transformers HT, LT, Breakers,
Protection Relays, vacuum and sf6 and air circuit Breakers to related control circuits alarms
and signals checking and full loop checking of inputs and output DCS Signals, LV/HV
motors, LV/HV switchgear, If any power interruption occurs in the systems trouble shoot
as soon as possible make it healthy and normalize the power for all areas. And maintaining
the power and HVAC System and MDB, Fire Alarm system, cathodes production, Heat
Tracing System, Chemical Injection Skids, multi Phase flowmetor and flow Instruments
without failure for all the well heads and CPF facilities and accomantaitions
Employer: Dynamac Engineering-co
FPSO Construction &Commissioning Projects, Singapore.
Role : E&I Supervisor in FPSO
Owner : PETRO BRAZIL
Duration : August 2003 to November 2005
Responsibility & Details of Experience
Worked As an E&I SUPERVISOR Involved Constructions,Installation of cable ladder and
tray instrument supports and module lighting and enclosure (Ex.D Flam Roof) for lighting
and electrical & instruments. Switchgears and Control panels and compressors for
instruments air also different purpose Motor’s, solar panels related equipments and
Transformers (ExE, ExO) as per our client requirement (IEC standards) in the facility. As
per P&ID drawings and commissioning of electrical and instruments all over the projects,
productive Relays Testing & commissioning as per ANCI code and all the Equipments’
calibration in the FPSO, estimated time schedule in heavy Pressures and coordinating with
Electrical and instruments technicians to do proper way of installation and commissioning.
And guide the contractors to do their work in safe & fallow the Standards and good
5. Resume for: Service Engineer
environmental condition, and issuing the Drawings and preparing the material and
scheduling the work for correct time and date and maintaining the quality control and
quality assurance in this project.
Details of Experience in EMAR Company in IRAQ
Role : PLANT E&I Supervisor (ROWPO)
Client : KBR (Kellogg Brown & Root)
Duration: November 2002 may2003
Responsibility & Details of Experience
Plant installation and maintenance and commissioning job for KBR (Kellogg Brown and
Root)in Iraq in various places for KBR clients in Iraq province for Install the water
purification unit and electrical and instruments. Commissioning the equipments and the
PLC Programming and do to the full loop Check and run the plant 24 hour non-stops and
hand over the Kbr the subcontractor is EMAR Kuwait.
Details of Experience in KURIHARA KOGYO-CO. LTD., Singapore
1, Role : Electrical and Instrumentation Supervisor
Client : Selator Sewerage Treatment Works Phase III Extension project
Duration: October 1996 to December 1998
Responsibility & Details of Experience
Simulation test for overall electrical equipment (Alsthom) VFD and related 400 KW
Motors power & Control system checking and commission. Field Instrument installation,
Calibration and Loop checking as per ENV Specification and quality of standard.
Installation of marshalling cabinet and carried out internal wiring according to the
Approved drawing. To check I/O Points and set points of the tripping and protection
System with the conveyer system and combine with DCS System
2, Role : Electrical and Instrumentation Supervisor
Client : Kanji Sewerage Treatment Works Phase – III
Duration: January 1999 to December 2000
Responsibility & Details of Experience
Leading a team which is involved in installations of instrument, power cable insulation
testing, Loop checking and commissioning process related equipment and instruments.
Trouble shooting DCS processor and card failure, I/O points checking with FOXPRO
System engineers. Preparation of the progress reports, participation in the progress meeting
and submit progress Report to Management Team
Details of Experience in SAUDI ARABIA in Al-Mary contracting –co, ksa
1, Role : Industrial Electrical Foreman
Client : 1, Zuluf wet crude oil handling project (Aram co)
Duration: October 1992to November 1993
Responsibility & Details of Experience
Installing and commissioning of Transformer and switchgears. Supervision of cable
pulling, Glanding and termination. Installation of plant lighting and ups system in the Gas
plant and Honey well DCS system Modification job
6. Resume for: Service Engineer
2, Role : Industrial Electrical Foreman
Client : 2, Marjan onshore project (Aram co)
Duration: October 1993Novemberto March 1994
Responsibility & Details of Experience
Installation and Commissioning of flame proof equipment and switch gears , transformers ,
Plant lighting and ups system in the gas plant and MCC side relays changed checked the
Trip Amps as per Armco Specification .
Company: Annai Electrical at Madurai, India.
Role : Industrial Electrical Technician
Duration: 1990to 1991
Supervised and Lead a team in different kind of Industrial and domestic equipments
Erection and Installation and Commissioning.
Role : Electrical Technician
Company: Balaji Ferro Industries at Madurai, India.
Duration : 1988to 1990
Working as an Electrical Technician to carry out the Metal forging Industries equipments.
installation of motors with control drives and commissioning and Maintenances of 200 hp
motors and 11/.415 kv 150Kv-up to 500kva Power Transformers.
PERSONAL PROFILE
Name : R.JOSEPH JESU RAJA
Father’s Name : M.ROYAPPAN
PERSONAL
Outgoing enthusiastic eager to learn new things, team member and have excellent
Communication skills.
Date of Birth : 05-04-1967
Place of Birth : Michael Pattinam
Marital Status : Married
Nationality : Indian.
PASSPORT DETAILS
Passport No: J4157723 Place of Issue: Madurai.
Date of Issue: 03.12.2011 Date of Expiry: 02:12:2020
REFERENCE
DECLARATION
I hereby declare that the above information furnished is true to the best of my
knowledge and belief.
Place : Madurai
Date : 6th May, 2016
SIGNATURE: R.Joseph Jesu Raja