The document describes a Simba Cross Belt Sorter system. The system sorts items using an infeeding system to measure items and send them to the sorter host. The sorter host uses cross belt vehicles and servo motors to deliver items to the correct outfeeding chutes based on sorting information from the control system. The system can sort up to 20,000 items per hour and features modular design, high speeds, and low noise.

1. SIMBA-CBS-600
EFFICIENT SORTING PRODUCT SOLUTION
SIMBA CROSS BELT SORTER
LOGISTICS AUTOMATION

2. Cross belt sorter system is composed of infeeding
part, sorter host, outfeeding part and control
system. Items enter sorter hose by control system
from infeeding system for sorting operation.
Outfeeding system will help locate items physical
location and storage to achieve its sorting function.
Infeeding system:
To achieve high efficiency and accurate operation of
sorter host. Function of this system is to automatically
measure physical parameter and information
identification of items to be sorted, to make sure items
are properly and synchronously infeed onto high speed
running sorting vehicle. Simba cross belt sorter system
is able to provide you with customized fully automated,
semi-automated or manual operated infeeding system
according to working environment.
Sorter host system:
Sorter host is the main part to implement system sorting
operation, with the function of delivering items with
sorting information to the right sorting diverts in
accordance with logical relation. Simba cross belt sorter
system adopts servo direct drive technology, instant
start in millisecond to ensure items keeping in the middle
of vehicle during loading and unloading as well as
reduces sorting error rate.
SIMBA-CBS-600
System composition and
function introduction
01

3. Control system:
Control system is the brain and nerve of the whole sorting
system. It integrates mobile power supply technology, mobile
communication technology, field bus, OPC communication,
industrial Ethernet communication, PLC servo and frequency
conversion technology etc. It not only coordinates each
function module, the communication function in the control
system also can exchange data and management policy with
the upper management system, through this exchange
makes the sorting system become an integral and close part
of the whole logistics management system.
Outfeeding system:
It is the end equipment in sorting system. It will
temporarily store the items delivered by sorter host, at
the same time, it will inspect and display related
parameters of items and transmit these information to
master control system and manage them. Different
kinds of outputs can be used to match the wide range of
items that can be handled. Items can be directly sorted
into outputs such as chute, bag rack, roll cage etc based
on patterns of items to be sorted.
02
SIMBA AUTOMATION

4. Simba cross belt sorter
3
Chute exit
Automatic infeeding system
Cross belt vehicle
03

5. 4
Chute with postbag
em Manual infeeding system
04
SIMBA AUTOMATION

6. 05
Simba cross belt sorter
is featuring with high efficiency, low consumption, high speed, low noise, high cost performance and low
error rate. Its low consumption loop drive, cross belt servo drive and low noise loop running mechanism
have already get to an international advanced level, equal to domestic leading level. With a sorting rate
of 20000 p/h, it is one of the first choices by E-commerce, express, apparel industries in China for
intelligent sorting equipment.
.
5
SIMBA-CBS-600
Main performance parameter

7. 06
SIMBA AUTOMATION
6
Content Specifications Note
Item type Carton, package, soft package
Car pitch 500/600/800/1000/1100(mm)
Can be customized according to
customer requirements
Car size
Can be customized according to
customer requirements
Can be customized according to
customer requirements
600*700mmBelt surface 430mm
（600 Pitch）
1100*700mmBelt surface 400mm
（1 car with 2 belt）
Item Size
Min： L100*W50*H1(mm)
Max： L900*W600*H600(mm)
Item weight Min: 10g Max: 50kg
Capacity 12000-80000pcs/h
Speed 1.2-3m/s Adjustable
Incline and
decline angle
±12°
Infeeding system
Automatic induction, semi-auto
induction and manual induction
Induction capacity 1500-3500pcs/h
Sorting error ratio ＜ 99.99%
Running noise ＜72db(A)
Drive mode Linear motor/ Synchronous motor
Car belt drive 48v servo roller
Monitoring system SCADA system

8. 07
1- Low consumption loop drive technology (linear motor)
· High performance line set
· Small gap wheel guided bilateral solenoid drive
· High thermal conductive aluminum thermal interface material
· High density heat flow exhaust and cooling technology
· Integrated module technology
3-Cross belt servo motorized roller direct drive technology
· Pulse counting replaces conventional synchronous drive, ensure items
accurate alignment.
· Servo motorized roller drive enables more accurate infeeding and
outfeeding of packages with different weights.
· Vehicle starts in millisecond, quicker reaction and more efficient.
· Simple structure of vehicle body, space saving, weight reduced,
energy consumption reduced, easy installation and maintenance.
2- Modular design for fast disassembling and maintenance
Introduced with industrial design of modular structure and fast assembly
disassembly technology, result in changing a cross belt vehicle within
only 5 minutes and extremely easy maintenance.
.
5
SIMBA-CBS-600
Product features

9. 08
SIMBA AUTOMATION
4-High speed, low noise
Perfect mix of super light aluminum vehicle body with optimized
structure and low noise running mechanism, with a noise level
under 65dB.
.
5- Rapid production delivery, Rapid production
and construction
E.g. Cross belt sorter with 300 cars, production needs 7 days,
installation needs 20 days, and commissioning needs 7-20 days.
6

10. 09
General Control Architeture
WMS
Main Switch
RCOAX
Client
Siemens
W734-1
Antenna
M
M
M
Carrier
Control
Unit
CrossBelt
Servo Motor 1
M
M
M
CrossBelt
Servo Motor 2
...
CrossBelt
Servo Motor xx
Driver Unit
Linear Motor2
Driver Unit
Linear Motor1
Driver Unit
Linear Motor xx
I/O module 1
For Buttons，
Sensor, Lamps
I /O module 2
...
I /O module xx
Induction Control PLC
Siemens S7-1200
Light Curtain
Dynamic Weighing
Inverter1
Inverter2
Inverter xx
CBS Main_Control_PLC
Siemens S7-1500
Conveyor system
Main_Control_PLC
Siemens S7-1200
Inverter 1
...
Inverter xx Inverter 2
I/O module 1
For Buttons，
Sensor,Lamps
I/O module 2
...
I/O module xx
AS-I
Gateway
Switch
Siemens
Customer Scope
Simba Scope
WCS HMI
OBR
RCOAX AP
Siemens
Switch
Siemens
PROFINET
PROFIBUS DP
ETHERNET
AS-i
Serial Com
AS-I
Gateway
Bihl+Wiede
mann

11. 10
SIMBA AUTOMATION

12. Shanghai Simba Automation Technology Co.,Ltd
MP : +86 13311898082
Email : zhaolan@simba-sh.com
Add : 22F, Building A, The new Bund WTC, Pudong District,Shanghai
www.simba-sh.com