Clil
•Download as PPTX, PDF•
0 likes•665 views
The document provides instructions for an experiment to compare how much water different materials like sponges, kitchen cloths, and tissue paper can absorb. It outlines the materials needed, procedures for soaking samples in water and measuring how much water they absorb, and structures for writing comparative and superlative sentences to analyze the results. Key vocabulary includes absorbent, liquid, material, and milliliters.
Report
Share
Report
Share
Recommended
Water repellent finish
The document introduces the team Phoenix and provides information about water repellent finishes for fabrics. It defines water repellent fabrics as those that resist being wetted by water and allow water drops to roll off. There are three main types of water repellent finishes - non-durable, semi-durable, and durable. Various chemistries are used in each type of finish. Common test methods for evaluating water repellency include the spray test method. Water repellent fabrics have applications in items like umbrellas, swimsuits, car seats, and more.
Water Repellency and flame reterdent
Water repellency and flame retardancy are important textile properties. Water repellent fabrics resist water penetration and allow water to roll off, while waterproof fabrics have fewer pores and are less permeable. Several tests evaluate water repellency, including the spray test where water is sprayed on samples rated based on wetting. The Bundesmann test subjects samples to high-pressure water for 10 minutes to measure penetration and absorption. Flame retardant finishes can save fabrics from fire using compounds of phosphorus, antimony, and boron. The vertical flame test exposes samples to an open flame to evaluate flame retardancy based on after flame and char length. Proper testing ensures textiles have sufficient water repell
Water repellency of fabrics
This document discusses water repellency in fabrics. It defines water repellent fabrics as those where water drops roll off rather than soaking in. A fabric's water resistance depends on fiber surface, porosity, and water impact force. It distinguishes water-repellent fabrics, which are permeable but resist water under low pressure, from waterproof fabrics, which have fewer pores and resist water under high pressure. The document outlines different types of water repellent finishes and several test methods used to evaluate water repellency in fabrics.
Water repellency & waterproof & repellency test method
This document discusses water repellency and breathability in fabrics. It defines water repellency as water globules not spreading on a textile surface. Breathability requires fabrics to be soft, lightweight, durable, and allow rapid moisture transfer while regulating heat and moisture. Various testing methods are described to evaluate breathability properties. Coatings like polyurethane can be applied to generate micro pores for breathability. Applications include protective clothing, outdoor wear, and roofing membranes where breathability and water resistance are important.
Flame Retardant Finish & Water Repellent Finish
This presentation will help the students who are studying in textile, fashion designing, merchandising and so on........
FUNCTIONAL FINISHES OF GARMENTS
The document discusses various types of functional finishes for textiles, including antimicrobial, antistatic, crease resistant, durable press, flame resistant, soil release, and water and stain repellent finishes. It provides details on the objectives, methods, benefits, and requirements of antimicrobial finishes. It also explains the mechanisms and methods of application for antistatic and crease resistant finishes.
Water proof finish
This document discusses different methods for waterproofing and water-repellent finishes on fabrics. It describes several techniques:
1. Applying a uniform coating of substances like rubber to block air and water passage through the fabric.
2. Using hydrophobic chemicals that are deposited on or make the fabric hydrophobic itself.
3. Specific techniques include coating with wax emulsions, synthetic resins, metallic salts, silicones and stearoxy methyl pyridium chloride.
4. The goal is to prevent air and water from passing through without making the fabric too stiff or altering its properties. Proper chemical selection and multi-step processes like padding, drying and curing are required.
How to test absorbency of a fabric.
This document provides an overview of testing the absorbency of fabrics. It defines absorbency as a material's ability to soak up liquid and describes various tests used to measure a fabric's absorbency, including immersion, drop, spot, and wicking/column tests. These tests measure factors like how quickly a fabric can capture and hold water. The document also compares the absorbency of natural cotton versus synthetic nylon, noting that cotton is more absorbent due to its molecular structure. Standard procedures for absorbency testing from AATCC and ASTM are described.
Recommended
Water repellent finish
The document introduces the team Phoenix and provides information about water repellent finishes for fabrics. It defines water repellent fabrics as those that resist being wetted by water and allow water drops to roll off. There are three main types of water repellent finishes - non-durable, semi-durable, and durable. Various chemistries are used in each type of finish. Common test methods for evaluating water repellency include the spray test method. Water repellent fabrics have applications in items like umbrellas, swimsuits, car seats, and more.
Water Repellency and flame reterdent
Water repellency and flame retardancy are important textile properties. Water repellent fabrics resist water penetration and allow water to roll off, while waterproof fabrics have fewer pores and are less permeable. Several tests evaluate water repellency, including the spray test where water is sprayed on samples rated based on wetting. The Bundesmann test subjects samples to high-pressure water for 10 minutes to measure penetration and absorption. Flame retardant finishes can save fabrics from fire using compounds of phosphorus, antimony, and boron. The vertical flame test exposes samples to an open flame to evaluate flame retardancy based on after flame and char length. Proper testing ensures textiles have sufficient water repell
Water repellency of fabrics
This document discusses water repellency in fabrics. It defines water repellent fabrics as those where water drops roll off rather than soaking in. A fabric's water resistance depends on fiber surface, porosity, and water impact force. It distinguishes water-repellent fabrics, which are permeable but resist water under low pressure, from waterproof fabrics, which have fewer pores and resist water under high pressure. The document outlines different types of water repellent finishes and several test methods used to evaluate water repellency in fabrics.
Water repellency & waterproof & repellency test method
This document discusses water repellency and breathability in fabrics. It defines water repellency as water globules not spreading on a textile surface. Breathability requires fabrics to be soft, lightweight, durable, and allow rapid moisture transfer while regulating heat and moisture. Various testing methods are described to evaluate breathability properties. Coatings like polyurethane can be applied to generate micro pores for breathability. Applications include protective clothing, outdoor wear, and roofing membranes where breathability and water resistance are important.
Flame Retardant Finish & Water Repellent Finish
This presentation will help the students who are studying in textile, fashion designing, merchandising and so on........
FUNCTIONAL FINISHES OF GARMENTS
The document discusses various types of functional finishes for textiles, including antimicrobial, antistatic, crease resistant, durable press, flame resistant, soil release, and water and stain repellent finishes. It provides details on the objectives, methods, benefits, and requirements of antimicrobial finishes. It also explains the mechanisms and methods of application for antistatic and crease resistant finishes.
Water proof finish
This document discusses different methods for waterproofing and water-repellent finishes on fabrics. It describes several techniques:
1. Applying a uniform coating of substances like rubber to block air and water passage through the fabric.
2. Using hydrophobic chemicals that are deposited on or make the fabric hydrophobic itself.
3. Specific techniques include coating with wax emulsions, synthetic resins, metallic salts, silicones and stearoxy methyl pyridium chloride.
4. The goal is to prevent air and water from passing through without making the fabric too stiff or altering its properties. Proper chemical selection and multi-step processes like padding, drying and curing are required.
How to test absorbency of a fabric.
This document provides an overview of testing the absorbency of fabrics. It defines absorbency as a material's ability to soak up liquid and describes various tests used to measure a fabric's absorbency, including immersion, drop, spot, and wicking/column tests. These tests measure factors like how quickly a fabric can capture and hold water. The document also compares the absorbency of natural cotton versus synthetic nylon, noting that cotton is more absorbent due to its molecular structure. Standard procedures for absorbency testing from AATCC and ASTM are described.
Composites, Dry Waterproof Coating IDM10
This document discusses testing different materials to create composite materials and waterproof coatings. It describes experiments exploring the strength and stiffness of foam composites with various reinforcements like tape. The results showed that foam composites with tape on both sides were the stiffest but still bent. It then explains how to create a simple and low-cost waterproof coating by melting paraffin and beeswax together. This could waterproof cameras and clothing for use in wet conditions. The document outlines presenting these ideas in a competition and discussing them further at an advanced research center. It concludes by thanking the competition organizers and sponsors for their support.
mechanical finishing of worsted fabrics
This document discusses various mechanical finishing processes used for wool and wool-blend fabrics. It outlines the key steps for all-wool, poly-wool, and poly-viscose blended materials. The main processes discussed include heat setting, singeing, scouring, hydro extraction, padding, cropping, decatizing, pressing, and super finishing. Process parameters like temperature, speed, and time are provided for many of the steps.
Anti static finish
The document discusses anti-static finishes that are applied to synthetic fabrics during processing to prevent the buildup of static charge. Synthetic fabrics are not good conductors and develop static charges during spinning, weaving, and finishing. This can cause fabrics to become entangled or attract dirt. Anti-static finishes reduce the surface charge and increase conduction, using chemicals like silicone emulsions, polyethylene emulsions, and polyammonium quaternary salts. The finish can be durable or non-durable. Higher moisture regain in fibers also helps dissipate static. Common application methods are exhaustion and pad-dry-cure.
Chemical finishing in technical textile
Technical textiles are fabrics designed for their technical performance properties rather than aesthetics. Textile finishing treatments enhance fabric qualities after dyeing. There are various types of chemical finishes that impart new properties like waterproofing, flame resistance, and antimicrobial effects. Key chemical finishes discussed include waterproofing and water repellent finishes using chemicals like vulcanized rubber or fluorocarbons, flame repellent finishes using bromine or phosphorus, and antimicrobial finishes using triclosan or metallic salts. The presentation concludes that textile finishes significantly improve fabric appearance, performance, and protection from damages.
Repellent finishes oil and water
1) Fluorocarbon polymers are the only type of finishes that can achieve oil repellency on textiles. Water repellency can be achieved through different product groups including paraffin emulsions, stearic acid-melamine resins, and silicone and fluorocarbon polymers.
2) Repellent finishes work by reducing the surface energy of fibers to make them less attractive to water, oil, and dirt. Fluorocarbon polymers have the lowest surface energy and can repel both water and oil.
3) While fluorocarbon finishes provide the best oil and water repellency as well as durability, they can be modified through additives like boosters to further improve properties like handle,
Fabric Finishes
Fabric can be dyed before or after spinning yarns together and before or after weaving into fabric. Dyeing occurs at the fibre, yarn and fabric stages of production. Fabrics are also printed with designs and given texture finishes like napping, glazing or stone washing to create effects like velvet, chintz or worn looks. Additional finishes are applied to fabrics to enhance performance properties such as making them antibacterial, crease-resistant or flame-resistant. Specialty finishes provide benefits like being nonstick, enhancing speed drying or protecting from the sun, allergens or moths.
Wrinkle resistant finishes in textiles
This document discusses wrinkle resistant finishes for fabrics using resin treatments. It describes the mechanism of wrinkle formation in cellulosic fibers and how formaldehyde-based resins can be used to crosslink fibers and reduce hydrogen bonding. The process involves impregnating fabrics with urea-formaldehyde or dimethylol ethylene urea precondensate solutions, curing the treated fabrics, washing and softening. Effects of the finishes on fabric properties like recovery angle, tensile strength and stiffness are analyzed. Recipes for resin treatments of cotton, viscose and polyester fabrics are provided.
Dr. B.M.N. College_ Speciality finished for performance
This PPT is made by SYBSc Students of Textile Science and Apparel Design Department for their Class Presentation.
CBSE Class XII practical project on Rayon threads
This document is a student project report on preparing a sample of cuprammonium rayon threads from filter paper. It includes an introduction to rayon and the cuprammonium process, a list of required apparatus and chemicals, the procedure, conclusions and bibliography. The student successfully prepared a sample of cuprammonium rayon threads by dissolving filter paper pieces in a solution of copper sulfate and ammonia, then extruding the viscous solution through a syringe into an acid bath to form fibers. Precautions are noted for the preparation and fiber formation.
Soil release finish
This document discusses concepts related to soil and soiling of textiles. It defines particulate matter and different types of particulate soil like clay, soot, and metal oxides. It also discusses oily soils like sebum and sweat. Factors that influence soiling include moisture regain, electrostatic charge, fabric structure, particle size of soil, and mechanisms of soil transfer and adhesion. It provides details on different types of soil-release chemistry used in textile finishing, including carboxy-based, hydroxy-based, ethoxy-based, and fluorine-based finishes.
Special finishes
This document discusses various specialty finishes for fabrics including bio-polishing, denim bleaching, insect repellent, antibacterial, cool, thermocat, and UV protective finishes. Bio-polishing uses genetically modified enzymes to achieve tailored results with less negative effects. Denim bleaching uses laccase enzymes to create contrast while reducing dye redeposition and process time. Insect repellent and antibacterial finishes inhibit microbial growth to maintain hygiene, freshness, and prevent disease transmission. Cool finishes enhance sweat evaporation for a cooling effect. Thermocat finishes impart heat retention. And UV protective finishes shield fabrics and skin from UV radiation up to UPF 40 or higher.
Soil release finish
Soil release finishes are applied to fabrics to make soil particles easier to remove during washing. The finish allows soil to detach from the fabric surface rather than becoming redeposited. Soil release finishes are important for synthetic fabrics and ladies' wear that are prone to absorbing soil. The finish must not negatively impact the fabric's properties or fastness. Methods for applying soil release finishes include mercerization, application of film-forming compounds, fiber conversion, and use of silicones or acrylic polymers. The appropriate process depends on the fiber and may involve padding, drying, and curing chemicals.
Textile finishes
Fabric finishes are applied after fabric production to improve appearance, feel, or properties. Aesthetic finishes influence texture, luster, drape, and hand. Calendering uses rollers to impart finishes like glazing, moire, or embossing. Other techniques include brushing, shearing, and flocking to modify texture. Functional finishes provide benefits like wrinkle resistance or stain release. A fabric's fiber content and construction determine suitable finishing methods.
Social service2
The document outlines three community service projects taking place in Mahasarakham, Thailand: donating and helping victims in Bhankhongkodvein, Khanreing, and Kantharawichai; cleaning up a temple in Bhankhongkodvein, Khanreing, and Kantharawichai; and cleaning up a road in Banwangyao, Muang.
Social service1
The document details 3 cleanup projects taking place in Mahasarakham province, Thailand. The projects include cleaning garbage from Thakhonyang Road in Kantarawichai district, cleaning garbage from Somthavin Canal in Muang district, and making sandbags and cleaning up at Thongnarao Temple in Muang district.
Speaking
Timmy went to Alaska to visit his grandma for his last vacation. He stayed at a hotel and went swimming and rode a banana boat. Benny also went to the beach for a vacation, staying at a hotel called The Imperial. He went with his parents and older sister, and will go again next year.
Unit place
The document discusses different types of vacation destinations and using wh-questions to ask for more details. It provides examples of conversations between a travel agent and customer where the agent suggests various locations for vacations and the customer asks questions or expresses preferences about climate, crowds, culture, and activities. The document also includes exercises for learners to practice similar conversations and create descriptions of imaginary ideal vacation destinations.
แปดวิธีการสอน Suggestopedia
The document discusses using the words "some" and "any" when ordering food and drinks, explaining that "some" is used for positive sentences and questions to offer things while "any" is used for negative sentences and questions. It provides examples of conversations between a waiter and customer where they discuss quantities of foods like beef, vegetables, carrots and potatoes that the customer would like in their order.
English camp1
The document is a record from Thakhongyang School in Muang, Mahasarakham province. It provides the date of August 28-29, 2010, suggesting it is documenting an event or activities that took place on those dates at the school.
Social service3
The document discusses painting buildings at Bhankaowitthayanukul in Keangkor, Chaiyaphum. It mentions painting buildings located at Bhankaowitthayanukul in the area of Keangkor in Chaiyaphum province.
Going On Vacation / Vocabulary
This document provides a list of items to pack for a vacation, including towels, bathing suits, sandals, tents, sleeping bags, insect repellent, first aid kits, makeup, brushes, combs, shampoo, hair dryers, soap, sunscreen, scissors, pajamas, batteries, flashlights, toothpaste, toothbrushes, razors, and suitcases. The list contains essential supplies for personal hygiene, protection from insects and the elements, basic medical needs, and overnight gear for a camping or beach vacation.
Let's go to a Restaurant
This document contains a list of food and drink options at a restaurant, organized into categories including meats, sides, drinks, seafood, salads, fast food, healthy food, and desserts. It concludes by asking the reader what they would like to order from the options presented.
More Related Content
What's hot
Composites, Dry Waterproof Coating IDM10
This document discusses testing different materials to create composite materials and waterproof coatings. It describes experiments exploring the strength and stiffness of foam composites with various reinforcements like tape. The results showed that foam composites with tape on both sides were the stiffest but still bent. It then explains how to create a simple and low-cost waterproof coating by melting paraffin and beeswax together. This could waterproof cameras and clothing for use in wet conditions. The document outlines presenting these ideas in a competition and discussing them further at an advanced research center. It concludes by thanking the competition organizers and sponsors for their support.
mechanical finishing of worsted fabrics
This document discusses various mechanical finishing processes used for wool and wool-blend fabrics. It outlines the key steps for all-wool, poly-wool, and poly-viscose blended materials. The main processes discussed include heat setting, singeing, scouring, hydro extraction, padding, cropping, decatizing, pressing, and super finishing. Process parameters like temperature, speed, and time are provided for many of the steps.
Anti static finish
The document discusses anti-static finishes that are applied to synthetic fabrics during processing to prevent the buildup of static charge. Synthetic fabrics are not good conductors and develop static charges during spinning, weaving, and finishing. This can cause fabrics to become entangled or attract dirt. Anti-static finishes reduce the surface charge and increase conduction, using chemicals like silicone emulsions, polyethylene emulsions, and polyammonium quaternary salts. The finish can be durable or non-durable. Higher moisture regain in fibers also helps dissipate static. Common application methods are exhaustion and pad-dry-cure.
Chemical finishing in technical textile
Technical textiles are fabrics designed for their technical performance properties rather than aesthetics. Textile finishing treatments enhance fabric qualities after dyeing. There are various types of chemical finishes that impart new properties like waterproofing, flame resistance, and antimicrobial effects. Key chemical finishes discussed include waterproofing and water repellent finishes using chemicals like vulcanized rubber or fluorocarbons, flame repellent finishes using bromine or phosphorus, and antimicrobial finishes using triclosan or metallic salts. The presentation concludes that textile finishes significantly improve fabric appearance, performance, and protection from damages.
Repellent finishes oil and water
1) Fluorocarbon polymers are the only type of finishes that can achieve oil repellency on textiles. Water repellency can be achieved through different product groups including paraffin emulsions, stearic acid-melamine resins, and silicone and fluorocarbon polymers.
2) Repellent finishes work by reducing the surface energy of fibers to make them less attractive to water, oil, and dirt. Fluorocarbon polymers have the lowest surface energy and can repel both water and oil.
3) While fluorocarbon finishes provide the best oil and water repellency as well as durability, they can be modified through additives like boosters to further improve properties like handle,
Fabric Finishes
Fabric can be dyed before or after spinning yarns together and before or after weaving into fabric. Dyeing occurs at the fibre, yarn and fabric stages of production. Fabrics are also printed with designs and given texture finishes like napping, glazing or stone washing to create effects like velvet, chintz or worn looks. Additional finishes are applied to fabrics to enhance performance properties such as making them antibacterial, crease-resistant or flame-resistant. Specialty finishes provide benefits like being nonstick, enhancing speed drying or protecting from the sun, allergens or moths.
Wrinkle resistant finishes in textiles
This document discusses wrinkle resistant finishes for fabrics using resin treatments. It describes the mechanism of wrinkle formation in cellulosic fibers and how formaldehyde-based resins can be used to crosslink fibers and reduce hydrogen bonding. The process involves impregnating fabrics with urea-formaldehyde or dimethylol ethylene urea precondensate solutions, curing the treated fabrics, washing and softening. Effects of the finishes on fabric properties like recovery angle, tensile strength and stiffness are analyzed. Recipes for resin treatments of cotton, viscose and polyester fabrics are provided.
Dr. B.M.N. College_ Speciality finished for performance
This PPT is made by SYBSc Students of Textile Science and Apparel Design Department for their Class Presentation.
CBSE Class XII practical project on Rayon threads
This document is a student project report on preparing a sample of cuprammonium rayon threads from filter paper. It includes an introduction to rayon and the cuprammonium process, a list of required apparatus and chemicals, the procedure, conclusions and bibliography. The student successfully prepared a sample of cuprammonium rayon threads by dissolving filter paper pieces in a solution of copper sulfate and ammonia, then extruding the viscous solution through a syringe into an acid bath to form fibers. Precautions are noted for the preparation and fiber formation.
Soil release finish
This document discusses concepts related to soil and soiling of textiles. It defines particulate matter and different types of particulate soil like clay, soot, and metal oxides. It also discusses oily soils like sebum and sweat. Factors that influence soiling include moisture regain, electrostatic charge, fabric structure, particle size of soil, and mechanisms of soil transfer and adhesion. It provides details on different types of soil-release chemistry used in textile finishing, including carboxy-based, hydroxy-based, ethoxy-based, and fluorine-based finishes.
Special finishes
This document discusses various specialty finishes for fabrics including bio-polishing, denim bleaching, insect repellent, antibacterial, cool, thermocat, and UV protective finishes. Bio-polishing uses genetically modified enzymes to achieve tailored results with less negative effects. Denim bleaching uses laccase enzymes to create contrast while reducing dye redeposition and process time. Insect repellent and antibacterial finishes inhibit microbial growth to maintain hygiene, freshness, and prevent disease transmission. Cool finishes enhance sweat evaporation for a cooling effect. Thermocat finishes impart heat retention. And UV protective finishes shield fabrics and skin from UV radiation up to UPF 40 or higher.
Soil release finish
Soil release finishes are applied to fabrics to make soil particles easier to remove during washing. The finish allows soil to detach from the fabric surface rather than becoming redeposited. Soil release finishes are important for synthetic fabrics and ladies' wear that are prone to absorbing soil. The finish must not negatively impact the fabric's properties or fastness. Methods for applying soil release finishes include mercerization, application of film-forming compounds, fiber conversion, and use of silicones or acrylic polymers. The appropriate process depends on the fiber and may involve padding, drying, and curing chemicals.
Textile finishes
Fabric finishes are applied after fabric production to improve appearance, feel, or properties. Aesthetic finishes influence texture, luster, drape, and hand. Calendering uses rollers to impart finishes like glazing, moire, or embossing. Other techniques include brushing, shearing, and flocking to modify texture. Functional finishes provide benefits like wrinkle resistance or stain release. A fabric's fiber content and construction determine suitable finishing methods.
What's hot (13)
Dr. B.M.N. College_ Speciality finished for performance
Dr. B.M.N. College_ Speciality finished for performance
Viewers also liked
Social service2
The document outlines three community service projects taking place in Mahasarakham, Thailand: donating and helping victims in Bhankhongkodvein, Khanreing, and Kantharawichai; cleaning up a temple in Bhankhongkodvein, Khanreing, and Kantharawichai; and cleaning up a road in Banwangyao, Muang.
Social service1
The document details 3 cleanup projects taking place in Mahasarakham province, Thailand. The projects include cleaning garbage from Thakhonyang Road in Kantarawichai district, cleaning garbage from Somthavin Canal in Muang district, and making sandbags and cleaning up at Thongnarao Temple in Muang district.
Speaking
Timmy went to Alaska to visit his grandma for his last vacation. He stayed at a hotel and went swimming and rode a banana boat. Benny also went to the beach for a vacation, staying at a hotel called The Imperial. He went with his parents and older sister, and will go again next year.
Unit place
The document discusses different types of vacation destinations and using wh-questions to ask for more details. It provides examples of conversations between a travel agent and customer where the agent suggests various locations for vacations and the customer asks questions or expresses preferences about climate, crowds, culture, and activities. The document also includes exercises for learners to practice similar conversations and create descriptions of imaginary ideal vacation destinations.
แปดวิธีการสอน Suggestopedia
The document discusses using the words "some" and "any" when ordering food and drinks, explaining that "some" is used for positive sentences and questions to offer things while "any" is used for negative sentences and questions. It provides examples of conversations between a waiter and customer where they discuss quantities of foods like beef, vegetables, carrots and potatoes that the customer would like in their order.
English camp1
The document is a record from Thakhongyang School in Muang, Mahasarakham province. It provides the date of August 28-29, 2010, suggesting it is documenting an event or activities that took place on those dates at the school.
Social service3
The document discusses painting buildings at Bhankaowitthayanukul in Keangkor, Chaiyaphum. It mentions painting buildings located at Bhankaowitthayanukul in the area of Keangkor in Chaiyaphum province.
Going On Vacation / Vocabulary
This document provides a list of items to pack for a vacation, including towels, bathing suits, sandals, tents, sleeping bags, insect repellent, first aid kits, makeup, brushes, combs, shampoo, hair dryers, soap, sunscreen, scissors, pajamas, batteries, flashlights, toothpaste, toothbrushes, razors, and suitcases. The list contains essential supplies for personal hygiene, protection from insects and the elements, basic medical needs, and overnight gear for a camping or beach vacation.
Let's go to a Restaurant
This document contains a list of food and drink options at a restaurant, organized into categories including meats, sides, drinks, seafood, salads, fast food, healthy food, and desserts. It concludes by asking the reader what they would like to order from the options presented.
Viewers also liked (9)
More from Chanida507
Certificates
Certificates are documents that are issued as a way of formally attesting to an stated fact, such as to certify that certain qualifications have been met or certain facts have been verified and confirmed. They are typically used to verify educational achievements and qualifications, memberships, security clearances, and other credentials. Certificates provide documented proof of accomplishments and qualifications to others such as potential employers or institutions.
Social service4
We visited elders at an almshouse in Mahasarakham and helped clean up around the facility with friends from our class. We spent time with the elderly residents and tidied the grounds in a service project.
Korpai camp
The document appears to be from BannongkanDonsanook School in Ponphisai, Nongkai, Thailand and references dates from the 10th to the 16th of Much 2011. It relates to the school but provides no other details in the limited text.
English campspecialseason
The document is a record from Bankhonburi School in khonburi, Nakhonrachasima, Thailand dated February 21-22, 2011. It appears to be some kind of record from the school over those two dates but does not provide any other context or specifics about its purpose or contents.
English campknowleageweaving
Ban Sueang Khao School in Si Sa Ket province held an event from November 3rd to 4th, 2011. The event was held at Ban Sueang Khao School located in Si Sa Ket province. Details about the specific event or activities that took place were not provided in the document.
English camp3
The document is a record from Bankaowitthayanukun School in Keangkor, Chaiyaphum, Thailand dated 16-17 July 2011. It provides the location and dates but no other contextual information in the brief text.
English camp2
The document provides information about a school event that took place on January 29-30, 2011 at Srisukpitthayakom School in Kantarawichai, Mahasarakham, Thailand.
Arsa camp
The document provides details about an event that took place at Bannongo School in Khon Kaen, Thailand from October 8-17, 2010. It does not provide any other context or specifics about the event itself.
Writing
This document provides an itinerary for a school trip to New York City. It outlines the schedule for the first two days, including arriving at the airport at 6am, taking a bus to the hotel upon arrival at 3pm, going for a jog in Central Park the next morning, taking a ferry to visit Ellis Island and the Statue of Liberty, spending time in Times Square for lunch, and choosing between the Empire State Building and a museum in the afternoon before dinner and a Broadway show. Any questions about the itinerary are welcomed.
Reading
The document discusses how to preserve the environment by protecting forests from clear cutting through more sustainable logging practices, as clear cutting destroys animal habitats, harms water quality, and impacts climate; it notes that scientists want logging companies to stop clear cutting and to only cut some trees while leaving others and replanting new trees, and that both loggers and scientists need to balance lumber production with forest protection.
Listening
The document is a lesson about medical services and using "should" to give advice. It contains vocabulary words related to being sick and seeing a doctor. There are examples of using "should" with subjects and infinitive verbs. The lesson also includes an audio conversation between a doctor and patient Emily, where Emily describes her symptoms of a cold like a terrible cough, dizzy spells, and tiredness. The doctor recommends Emily stay home and rest, taking aspirin, and to call for another appointment if she doesn't feel better.
Cbi
The document provides vocabulary and information about the solar system. It introduces key terms like satellite, comet, orbit, galaxy, planet, and rocket. It includes an example sentence about planets and their moons. It also lists topics that will be covered in a listening activity, including planets, satellites, comets, rockets, galaxies, and the moon and earth. It concludes with a series of true/false questions.
B slim
The document discusses housework chores and using the present progressive tense to describe them. It provides a conversation where Sam tells Amy that their family is cleaning the house, with their mom ironing, dad vacuuming, and brother Rob sweeping. Sam says they are washing dishes and still have to dust and mop. The document also includes vocabulary words related to housework and an example of using the present progressive tense.
Ppp
The document discusses occupation interests and uses examples to demonstrate the future tense. It contains a conversation where Kate and Jenny predict each other's future occupations. Jenny thinks Kate will be a doctor because she is good at science, while Kate thinks Jenny will be a tennis player since she is already a good player. They agree they will have amazing futures.
More from Chanida507 (14)
Recently uploaded
Presentation of the OECD Artificial Intelligence Review of Germany
Consult the full report at https://www.oecd.org/digital/oecd-artificial-intelligence-review-of-germany-609808d6-en.htm
Best 20 SEO Techniques To Improve Website Visibility In SERP
Boost your website's visibility with proven SEO techniques! Our latest blog dives into essential strategies to enhance your online presence, increase traffic, and rank higher on search engines. From keyword optimization to quality content creation, learn how to make your site stand out in the crowded digital landscape. Discover actionable tips and expert insights to elevate your SEO game.
Energy Efficient Video Encoding for Cloud and Edge Computing Instances
Energy Efficient Video Encoding for Cloud and Edge Computing Instances
Generating privacy-protected synthetic data using Secludy and Milvus
During this demo, the founders of Secludy will demonstrate how their system utilizes Milvus to store and manipulate embeddings for generating privacy-protected synthetic data. Their approach not only maintains the confidentiality of the original data but also enhances the utility and scalability of LLMs under privacy constraints. Attendees, including machine learning engineers, data scientists, and data managers, will witness first-hand how Secludy's integration with Milvus empowers organizations to harness the power of LLMs securely and efficiently.
5th LF Energy Power Grid Model Meet-up Slides
5th Power Grid Model Meet-up
It is with great pleasure that we extend to you an invitation to the 5th Power Grid Model Meet-up, scheduled for 6th June 2024. This event will adopt a hybrid format, allowing participants to join us either through an online Mircosoft Teams session or in person at TU/e located at Den Dolech 2, Eindhoven, Netherlands. The meet-up will be hosted by Eindhoven University of Technology (TU/e), a research university specializing in engineering science & technology.
Power Grid Model
The global energy transition is placing new and unprecedented demands on Distribution System Operators (DSOs). Alongside upgrades to grid capacity, processes such as digitization, capacity optimization, and congestion management are becoming vital for delivering reliable services.
Power Grid Model is an open source project from Linux Foundation Energy and provides a calculation engine that is increasingly essential for DSOs. It offers a standards-based foundation enabling real-time power systems analysis, simulations of electrical power grids, and sophisticated what-if analysis. In addition, it enables in-depth studies and analysis of the electrical power grid’s behavior and performance. This comprehensive model incorporates essential factors such as power generation capacity, electrical losses, voltage levels, power flows, and system stability.
Power Grid Model is currently being applied in a wide variety of use cases, including grid planning, expansion, reliability, and congestion studies. It can also help in analyzing the impact of renewable energy integration, assessing the effects of disturbances or faults, and developing strategies for grid control and optimization.
What to expect
For the upcoming meetup we are organizing, we have an exciting lineup of activities planned:
-Insightful presentations covering two practical applications of the Power Grid Model.
-An update on the latest advancements in Power Grid -Model technology during the first and second quarters of 2024.
-An interactive brainstorming session to discuss and propose new feature requests.
-An opportunity to connect with fellow Power Grid Model enthusiasts and users.
Programming Foundation Models with DSPy - Meetup Slides
Prompting language models is hard, while programming language models is easy. In this talk, I will discuss the state-of-the-art framework DSPy for programming foundation models with its powerful optimizers and runtime constraint system.
Skybuffer SAM4U tool for SAP license adoption
Manage and optimize your license adoption and consumption with SAM4U, an SAP free customer software asset management tool.
SAM4U, an SAP complimentary software asset management tool for customers, delivers a detailed and well-structured overview of license inventory and usage with a user-friendly interface. We offer a hosted, cost-effective, and performance-optimized SAM4U setup in the Skybuffer Cloud environment. You retain ownership of the system and data, while we manage the ABAP 7.58 infrastructure, ensuring fixed Total Cost of Ownership (TCO) and exceptional services through the SAP Fiori interface.
National Security Agency - NSA mobile device best practices
Threats to mobile devices are more prevalent and increasing in scope and complexity. Users of mobile devices desire to take full advantage of the features
available on those devices, but many of the features provide convenience and capability but sacrifice security. This best practices guide outlines steps the users can take to better protect personal devices and information.
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-und-domino-lizenzkostenreduzierung-in-der-welt-von-dlau/
DLAU und die Lizenzen nach dem CCB- und CCX-Modell sind für viele in der HCL-Community seit letztem Jahr ein heißes Thema. Als Notes- oder Domino-Kunde haben Sie vielleicht mit unerwartet hohen Benutzerzahlen und Lizenzgebühren zu kämpfen. Sie fragen sich vielleicht, wie diese neue Art der Lizenzierung funktioniert und welchen Nutzen sie Ihnen bringt. Vor allem wollen Sie sicherlich Ihr Budget einhalten und Kosten sparen, wo immer möglich. Das verstehen wir und wir möchten Ihnen dabei helfen!
Wir erklären Ihnen, wie Sie häufige Konfigurationsprobleme lösen können, die dazu führen können, dass mehr Benutzer gezählt werden als nötig, und wie Sie überflüssige oder ungenutzte Konten identifizieren und entfernen können, um Geld zu sparen. Es gibt auch einige Ansätze, die zu unnötigen Ausgaben führen können, z. B. wenn ein Personendokument anstelle eines Mail-Ins für geteilte Mailboxen verwendet wird. Wir zeigen Ihnen solche Fälle und deren Lösungen. Und natürlich erklären wir Ihnen das neue Lizenzmodell.
Nehmen Sie an diesem Webinar teil, bei dem HCL-Ambassador Marc Thomas und Gastredner Franz Walder Ihnen diese neue Welt näherbringen. Es vermittelt Ihnen die Tools und das Know-how, um den Überblick zu bewahren. Sie werden in der Lage sein, Ihre Kosten durch eine optimierte Domino-Konfiguration zu reduzieren und auch in Zukunft gering zu halten.
Diese Themen werden behandelt
- Reduzierung der Lizenzkosten durch Auffinden und Beheben von Fehlkonfigurationen und überflüssigen Konten
- Wie funktionieren CCB- und CCX-Lizenzen wirklich?
- Verstehen des DLAU-Tools und wie man es am besten nutzt
- Tipps für häufige Problembereiche, wie z. B. Team-Postfächer, Funktions-/Testbenutzer usw.
- Praxisbeispiele und Best Practices zum sofortigen Umsetzen
Building Production Ready Search Pipelines with Spark and Milvus
Spark is the widely used ETL tool for processing, indexing and ingesting data to serving stack for search. Milvus is the production-ready open-source vector database. In this talk we will show how to use Spark to process unstructured data to extract vector representations, and push the vectors to Milvus vector database for search serving.
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Discover the seamless integration of RPA (Robotic Process Automation), COMPOSER, and APM with AWS IDP enhanced with Slack notifications. Explore how these technologies converge to streamline workflows, optimize performance, and ensure secure access, all while leveraging the power of AWS IDP and real-time communication via Slack notifications.
Webinar: Designing a schema for a Data Warehouse
Are you new to data warehouses (DWH)? Do you need to check whether your data warehouse follows the best practices for a good design? In both cases, this webinar is for you.
A data warehouse is a central relational database that contains all measurements about a business or an organisation. This data comes from a variety of heterogeneous data sources, which includes databases of any type that back the applications used by the company, data files exported by some applications, or APIs provided by internal or external services.
But designing a data warehouse correctly is a hard task, which requires gathering information about the business processes that need to be analysed in the first place. These processes must be translated into so-called star schemas, which means, denormalised databases where each table represents a dimension or facts.
We will discuss these topics:
- How to gather information about a business;
- Understanding dictionaries and how to identify business entities;
- Dimensions and facts;
- Setting a table granularity;
- Types of facts;
- Types of dimensions;
- Snowflakes and how to avoid them;
- Expanding existing dimensions and facts.
Digital Marketing Trends in 2024 | Guide for Staying Ahead
https://www.wask.co/ebooks/digital-marketing-trends-in-2024
Feeling lost in the digital marketing whirlwind of 2024? Technology is changing, consumer habits are evolving, and staying ahead of the curve feels like a never-ending pursuit. This e-book is your compass. Dive into actionable insights to handle the complexities of modern marketing. From hyper-personalization to the power of user-generated content, learn how to build long-term relationships with your audience and unlock the secrets to success in the ever-shifting digital landscape.
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
ABSTRACT: A prima vista, un mattoncino Lego e la backdoor XZ potrebbero avere in comune il fatto di essere entrambi blocchi di costruzione, o dipendenze di progetti creativi e software. La realtà è che un mattoncino Lego e il caso della backdoor XZ hanno molto di più di tutto ciò in comune.
Partecipate alla presentazione per immergervi in una storia di interoperabilità, standard e formati aperti, per poi discutere del ruolo importante che i contributori hanno in una comunità open source sostenibile.
BIO: Sostenitrice del software libero e dei formati standard e aperti. È stata un membro attivo dei progetti Fedora e openSUSE e ha co-fondato l'Associazione LibreItalia dove è stata coinvolta in diversi eventi, migrazioni e formazione relativi a LibreOffice. In precedenza ha lavorato a migrazioni e corsi di formazione su LibreOffice per diverse amministrazioni pubbliche e privati. Da gennaio 2020 lavora in SUSE come Software Release Engineer per Uyuni e SUSE Manager e quando non segue la sua passione per i computer e per Geeko coltiva la sua curiosità per l'astronomia (da cui deriva il suo nickname deneb_alpha).
UiPath Test Automation using UiPath Test Suite series, part 6
Welcome to UiPath Test Automation using UiPath Test Suite series part 6. In this session, we will cover Test Automation with generative AI and Open AI.
UiPath Test Automation with generative AI and Open AI webinar offers an in-depth exploration of leveraging cutting-edge technologies for test automation within the UiPath platform. Attendees will delve into the integration of generative AI, a test automation solution, with Open AI advanced natural language processing capabilities.
Throughout the session, participants will discover how this synergy empowers testers to automate repetitive tasks, enhance testing accuracy, and expedite the software testing life cycle. Topics covered include the seamless integration process, practical use cases, and the benefits of harnessing AI-driven automation for UiPath testing initiatives. By attending this webinar, testers, and automation professionals can gain valuable insights into harnessing the power of AI to optimize their test automation workflows within the UiPath ecosystem, ultimately driving efficiency and quality in software development processes.
What will you get from this session?
1. Insights into integrating generative AI.
2. Understanding how this integration enhances test automation within the UiPath platform
3. Practical demonstrations
4. Exploration of real-world use cases illustrating the benefits of AI-driven test automation for UiPath
Topics covered:
What is generative AI
Test Automation with generative AI and Open AI.
UiPath integration with generative AI
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
Recently uploaded (20)
Presentation of the OECD Artificial Intelligence Review of Germany
Presentation of the OECD Artificial Intelligence Review of Germany
Deep Dive: AI-Powered Marketing to Get More Leads and Customers with HyperGro...
Deep Dive: AI-Powered Marketing to Get More Leads and Customers with HyperGro...
Best 20 SEO Techniques To Improve Website Visibility In SERP
Best 20 SEO Techniques To Improve Website Visibility In SERP
Energy Efficient Video Encoding for Cloud and Edge Computing Instances
Energy Efficient Video Encoding for Cloud and Edge Computing Instances
Nordic Marketo Engage User Group_June 13_ 2024.pptx
Nordic Marketo Engage User Group_June 13_ 2024.pptx
Generating privacy-protected synthetic data using Secludy and Milvus
Generating privacy-protected synthetic data using Secludy and Milvus
Programming Foundation Models with DSPy - Meetup Slides
Programming Foundation Models with DSPy - Meetup Slides
National Security Agency - NSA mobile device best practices
National Security Agency - NSA mobile device best practices
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
Building Production Ready Search Pipelines with Spark and Milvus
Building Production Ready Search Pipelines with Spark and Milvus
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Digital Marketing Trends in 2024 | Guide for Staying Ahead
Digital Marketing Trends in 2024 | Guide for Staying Ahead
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
UiPath Test Automation using UiPath Test Suite series, part 6
UiPath Test Automation using UiPath Test Suite series, part 6
Clil
- 1. Mopping up Unit 2: My Daily Life Topic: House Work Prathomsuksa 3
- 3. Mopping up Mr. and Mrs. Mop are cleaning
- 4. Mopping up vocabulary milliliters
- 5. Mopping up vocabulary material These are materials that we will use in this test.
- 6. Mopping up vocabulary soft >
- 7. Mopping up vocabulary absorb
- 8. Mopping up vocabulary liquid
- 9. Mopping up Review vocabulary liquid absorb soft material milliliters
- 10. Mopping up Review vocabulary liquid absorb > soft material milliliters
- 11. Mopping up Review vocabulary liquid absorb soft material milliliters
- 12. Mopping up Vocabulary review liquid absorb soft material milliliters
- 13. Mopping up Review vocabulary liquid absorb soft material milliliters
- 14. Mopping up structure comparative and superlative Structure of comparative [material 1]+ holds + more water than + [material 2] [material 1]+ holds + less water than + [material 2] Structure of superlative [material 1]+ holds the least/most water. Example comparative •A sponge holds more water than a kitchen cloth. superlative •A sponge holds the most water.
- 15. Mopping up Structure review Check your understanding. Fill in the blanks with “more than”, “the most” or “the least” 1. Kitchen cloth holds ______water____ a tissue paper. more than 2. Tissue paper holds ______________ water. the most/least 3. Sponge holds the most/least water. _____________
- 16. Mopping up Materials sponge kitchen cloth tissue paper glass and water tray
- 17. Mopping up obtaining evidence Procedure 1. Please, carefully to spill 250ml of water into a tray. 2. Place the material on the water. (20 seconds) 3. Pick the material up and squeeze it into the measuring.
- 18. Mopping up drawing together first second third