Effective process validation contributes significantly to assuring drug quality. The basic
principle of quality assurance is that a drug should be produced that is fit for its intended use.
This principle incorporates the understanding that the following conditions exist:
• Quality, safety, and efficacy are designed or built into the product.
• Quality cannot be adequately assured merely by in-process and finished-product
inspection or testing
Risk assessment for computer system validationBangaluru
A risk assessment is a process to identify potential hazards and analyze what could happen if a hazard occurs.
Computer system validation (sometimes called computer validation or CSV) is the process of documenting that a computer system meets a set of defined system requirements.
Aseptic / sterile - “ A state of control attained by using an aseptic work area and performing activities in a manner that precludes microbiological contamination of the exposed sterile product”
Validation of aseptic process should be designed to provide assurance through appropriate testing that all phases and activities of the process remain sterile and it is controlled within the predetermined parameters.
Drug product, container, and closure are subject to sterilization separately, and then brought together.
Effective process validation contributes significantly to assuring drug quality. The basic
principle of quality assurance is that a drug should be produced that is fit for its intended use.
This principle incorporates the understanding that the following conditions exist:
• Quality, safety, and efficacy are designed or built into the product.
• Quality cannot be adequately assured merely by in-process and finished-product
inspection or testing
Risk assessment for computer system validationBangaluru
A risk assessment is a process to identify potential hazards and analyze what could happen if a hazard occurs.
Computer system validation (sometimes called computer validation or CSV) is the process of documenting that a computer system meets a set of defined system requirements.
Aseptic / sterile - “ A state of control attained by using an aseptic work area and performing activities in a manner that precludes microbiological contamination of the exposed sterile product”
Validation of aseptic process should be designed to provide assurance through appropriate testing that all phases and activities of the process remain sterile and it is controlled within the predetermined parameters.
Drug product, container, and closure are subject to sterilization separately, and then brought together.
According to U.S.Food and Drug Administration
Process validation is establishing documented evidence which provides a high degree of assurance that a specific process will consistently produce a product meeting its predetermined specifications and quality characteristics.
In this presentation from IVT's 4th Annual Validation Week EU, Paul Pluta, discussed the differences between the traditional approach to cleaning validation and the lifecycle approach, applicable regulatory guidance, current industry trends, the necessary phases of the lifecycle approach (design and definition, cycle development, validation, and implementation), how to continously monitor the process, change control, and common obstacles to compliance.
Qualification of Tablet Compression Machine.pptxDhruvi50
Tablet Compression Machine
Principle of Tablet Compression Machine
Construction of Tablet Compression Machine
Working of Tablet Compression Machine
Qualification of Tablet Compression Machine
Installation Qualification
Operational Qualification
Performance Qualification
References
This presentation describes approaches for software validation used to automate laboratory research procedures, consolidate data collection and analysis and/or run sophisticated QC or manufacturing operations.
Several approaches to software validation exist and may be appropriate for a specific project.
The scope of any validation effort depends upon a number of factors
Size and complexity of the software,
Origin of the software (custom vs. off-the-shelf) and
Whether the functions are critical or non-critical in nature.
By effectively planning the process, validation time and resources can be reduced while meeting regulatory requirements.
Equipment used in pharmaceuticals dosage form manufacturing need to observe continuous qualification to monitor its performance and Concept of URS ,DQ, IQ,OQ,PQ,MQ...
Neologic Engineers, Clean-in-place (CIP) is an automated method of cleaning the interior surfaces of pipes, tanks, lines, process equipment.(CIP) Systems Reduce Cleaning Time and Costs. CIP Controls of all important parameters like time, temperature, flow, concentration.
Aseptic / sterile- “ A state of control attained by using an aseptic work area and performing activities in a manner that precludes microbiological contamination of the exposed sterile product”
Qualification of Friability Test Apparatus.pptxGNIPST
Brief description of qualification of laboratory testing apparatus : Friability Test Apparatus.
share it with your friends also if they faced problem about this topic.
Thank you
Overview on “Computer System Validation” CSVAnil Sharma
HI this is Anil Sharma, Executive Compliance in USV LTD. I want to share my brief knowledge on CSV with you. I hope my presentation will help you to understand basics of CSV.
Validation: Validation is a documented program that provides high degree of assurance that a specific process, method or system consistently produces a result meeting pre-determined acceptance criteria.
About the European Advanced Networking Test Center
Vendor independent network quality assurance since 1991
Unique technical expertise of network design and testing in latest technology areas
20-year testing experience matches highest quality standards.
Cisco’s NSO is an orchestration tool
Enabled by Tail-f division of Cisco
Interfaced with two layers
Northbound programmable interface to service tools (CLI, JSON-
RPC, REST...)
Southbound network elements interface (NETCONF, SNMP...)
EANTC verification areas of Cisco’s NSO
Service enablement, restoration, verification
Configuration push, update, repair and error mitigation Multi-vendor capabilities
According to U.S.Food and Drug Administration
Process validation is establishing documented evidence which provides a high degree of assurance that a specific process will consistently produce a product meeting its predetermined specifications and quality characteristics.
In this presentation from IVT's 4th Annual Validation Week EU, Paul Pluta, discussed the differences between the traditional approach to cleaning validation and the lifecycle approach, applicable regulatory guidance, current industry trends, the necessary phases of the lifecycle approach (design and definition, cycle development, validation, and implementation), how to continously monitor the process, change control, and common obstacles to compliance.
Qualification of Tablet Compression Machine.pptxDhruvi50
Tablet Compression Machine
Principle of Tablet Compression Machine
Construction of Tablet Compression Machine
Working of Tablet Compression Machine
Qualification of Tablet Compression Machine
Installation Qualification
Operational Qualification
Performance Qualification
References
This presentation describes approaches for software validation used to automate laboratory research procedures, consolidate data collection and analysis and/or run sophisticated QC or manufacturing operations.
Several approaches to software validation exist and may be appropriate for a specific project.
The scope of any validation effort depends upon a number of factors
Size and complexity of the software,
Origin of the software (custom vs. off-the-shelf) and
Whether the functions are critical or non-critical in nature.
By effectively planning the process, validation time and resources can be reduced while meeting regulatory requirements.
Equipment used in pharmaceuticals dosage form manufacturing need to observe continuous qualification to monitor its performance and Concept of URS ,DQ, IQ,OQ,PQ,MQ...
Neologic Engineers, Clean-in-place (CIP) is an automated method of cleaning the interior surfaces of pipes, tanks, lines, process equipment.(CIP) Systems Reduce Cleaning Time and Costs. CIP Controls of all important parameters like time, temperature, flow, concentration.
Aseptic / sterile- “ A state of control attained by using an aseptic work area and performing activities in a manner that precludes microbiological contamination of the exposed sterile product”
Qualification of Friability Test Apparatus.pptxGNIPST
Brief description of qualification of laboratory testing apparatus : Friability Test Apparatus.
share it with your friends also if they faced problem about this topic.
Thank you
Overview on “Computer System Validation” CSVAnil Sharma
HI this is Anil Sharma, Executive Compliance in USV LTD. I want to share my brief knowledge on CSV with you. I hope my presentation will help you to understand basics of CSV.
Validation: Validation is a documented program that provides high degree of assurance that a specific process, method or system consistently produces a result meeting pre-determined acceptance criteria.
About the European Advanced Networking Test Center
Vendor independent network quality assurance since 1991
Unique technical expertise of network design and testing in latest technology areas
20-year testing experience matches highest quality standards.
Cisco’s NSO is an orchestration tool
Enabled by Tail-f division of Cisco
Interfaced with two layers
Northbound programmable interface to service tools (CLI, JSON-
RPC, REST...)
Southbound network elements interface (NETCONF, SNMP...)
EANTC verification areas of Cisco’s NSO
Service enablement, restoration, verification
Configuration push, update, repair and error mitigation Multi-vendor capabilities
QUALIFICATION & VALIDATION.Validation is an essential part of GMP, and an element of QA.Critical steps in the process need to be validated.Need for confidence that the product will consistently meet predetermined specifications and attributes.
Validation may be defined as
“ Establishing documented evidence which provides a high degree of assurance that a specific process will consistently produce a product meeting its pre-determined specifications and quality attributes.”
Dry Heat
Moist Heat
Gas (Ethylene oxide)
Radiation (Gamma or Electron)
Filtration
Others - UV, Steam and formaldehyde, hydrogen peroxide
Sterilization: F0 - what it means - how to calculate it - how to use itFedegari Group
F0: A technical note
- What it means
- How to calculate it
- How to use it for adjustment, control and
validation of moist-heat sterilization processes
The Importance of Community Nursing Care.pdfAD Healthcare
NDIS and Community 24/7 Nursing Care is a specific type of support that may be provided under the NDIS for individuals with complex medical needs who require ongoing nursing care in a community setting, such as their home or a supported accommodation facility.
Empowering ACOs: Leveraging Quality Management Tools for MIPS and BeyondHealth Catalyst
Join us as we delve into the crucial realm of quality reporting for MSSP (Medicare Shared Savings Program) Accountable Care Organizations (ACOs).
In this session, we will explore how a robust quality management solution can empower your organization to meet regulatory requirements and improve processes for MIPS reporting and internal quality programs. Learn how our MeasureAble application enables compliance and fosters continuous improvement.
How many patients does case series should have In comparison to case reports.pdfpubrica101
Pubrica’s team of researchers and writers create scientific and medical research articles, which may be important resources for authors and practitioners. Pubrica medical writers assist you in creating and revising the introduction by alerting the reader to gaps in the chosen study subject. Our professionals understand the order in which the hypothesis topic is followed by the broad subject, the issue, and the backdrop.
https://pubrica.com/academy/case-study-or-series/how-many-patients-does-case-series-should-have-in-comparison-to-case-reports/
Defecation
Normal defecation begins with movement in the left colon, moving stool toward the anus. When stool reaches the rectum, the distention causes relaxation of the internal sphincter and an awareness of the need to defecate. At the time of defecation, the external sphincter relaxes, and abdominal muscles contract, increasing intrarectal pressure and forcing the stool out
The Valsalva maneuver exerts pressure to expel faeces through a voluntary contraction of the abdominal muscles while maintaining forced expiration against a closed airway. Patients with cardiovascular disease, glaucoma, increased intracranial pressure, or a new surgical wound are at greater risk for cardiac dysrhythmias and elevated blood pressure with the Valsalva maneuver and need to avoid straining to pass the stool.
Normal defecation is painless, resulting in passage of soft, formed stool
CONSTIPATION
Constipation is a symptom, not a disease. Improper diet, reduced fluid intake, lack of exercise, and certain medications can cause constipation. For example, patients receiving opiates for pain after surgery often require a stool softener or laxative to prevent constipation. The signs of constipation include infrequent bowel movements (less than every 3 days), difficulty passing stools, excessive straining, inability to defecate at will, and hard feaces
IMPACTION
Fecal impaction results from unrelieved constipation. It is a collection of hardened feces wedged in the rectum that a person cannot expel. In cases of severe impaction the mass extends up into the sigmoid colon.
DIARRHEA
Diarrhea is an increase in the number of stools and the passage of liquid, unformed feces. It is associated with disorders affecting digestion, absorption, and secretion in the GI tract. Intestinal contents pass through the small and large intestine too quickly to allow for the usual absorption of fluid and nutrients. Irritation within the colon results in increased mucus secretion. As a result, feces become watery, and the patient is unable to control the urge to defecate. Normally an anal bag is safe and effective in long-term treatment of patients with fecal incontinence at home, in hospice, or in the hospital. Fecal incontinence is expensive and a potentially dangerous condition in terms of contamination and risk of skin ulceration
HEMORRHOIDS
Hemorrhoids are dilated, engorged veins in the lining of the rectum. They are either external or internal.
FLATULENCE
As gas accumulates in the lumen of the intestines, the bowel wall stretches and distends (flatulence). It is a common cause of abdominal fullness, pain, and cramping. Normally intestinal gas escapes through the mouth (belching) or the anus (passing of flatus)
FECAL INCONTINENCE
Fecal incontinence is the inability to control passage of feces and gas from the anus. Incontinence harms a patient’s body image
PREPARATION AND GIVING OF LAXATIVESACCORDING TO POTTER AND PERRY,
An enema is the instillation of a solution into the rectum and sig
Medical Technology Tackles New Health Care Demand - Research Report - March 2...pchutichetpong
M Capital Group (“MCG”) predicts that with, against, despite, and even without the global pandemic, the medical technology (MedTech) industry shows signs of continuous healthy growth, driven by smaller, faster, and cheaper devices, growing demand for home-based applications, technological innovation, strategic acquisitions, investments, and SPAC listings. MCG predicts that this should reflects itself in annual growth of over 6%, well beyond 2028.
According to Chris Mouchabhani, Managing Partner at M Capital Group, “Despite all economic scenarios that one may consider, beyond overall economic shocks, medical technology should remain one of the most promising and robust sectors over the short to medium term and well beyond 2028.”
There is a movement towards home-based care for the elderly, next generation scanning and MRI devices, wearable technology, artificial intelligence incorporation, and online connectivity. Experts also see a focus on predictive, preventive, personalized, participatory, and precision medicine, with rising levels of integration of home care and technological innovation.
The average cost of treatment has been rising across the board, creating additional financial burdens to governments, healthcare providers and insurance companies. According to MCG, cost-per-inpatient-stay in the United States alone rose on average annually by over 13% between 2014 to 2021, leading MedTech to focus research efforts on optimized medical equipment at lower price points, whilst emphasizing portability and ease of use. Namely, 46% of the 1,008 medical technology companies in the 2021 MedTech Innovator (“MTI”) database are focusing on prevention, wellness, detection, or diagnosis, signaling a clear push for preventive care to also tackle costs.
In addition, there has also been a lasting impact on consumer and medical demand for home care, supported by the pandemic. Lockdowns, closure of care facilities, and healthcare systems subjected to capacity pressure, accelerated demand away from traditional inpatient care. Now, outpatient care solutions are driving industry production, with nearly 70% of recent diagnostics start-up companies producing products in areas such as ambulatory clinics, at-home care, and self-administered diagnostics.
The dimensions of healthcare quality refer to various attributes or aspects that define the standard of healthcare services. These dimensions are used to evaluate, measure, and improve the quality of care provided to patients. A comprehensive understanding of these dimensions ensures that healthcare systems can address various aspects of patient care effectively and holistically. Dimensions of Healthcare Quality and Performance of care include the following; Appropriateness, Availability, Competence, Continuity, Effectiveness, Efficiency, Efficacy, Prevention, Respect and Care, Safety as well as Timeliness.
Health Education on prevention of hypertensionRadhika kulvi
Hypertension is a chronic condition of concern due to its role in the causation of coronary heart diseases. Hypertension is a worldwide epidemic and important risk factor for coronary artery disease, stroke and renal diseases. Blood pressure is the force exerted by the blood against the walls of the blood vessels and is sufficient to maintain tissue perfusion during activity and rest. Hypertension is sustained elevation of BP. In adults, HTN exists when systolic blood pressure is equal to or greater than 140mmHg or diastolic BP is equal to or greater than 90mmHg. The
One of the most developed cities of India, the city of Chennai is the capital of Tamilnadu and many people from different parts of India come here to earn their bread and butter. Being a metropolitan, the city is filled with towering building and beaches but the sad part as with almost every Indian city
Leading the Way in Nephrology: Dr. David Greene's Work with Stem Cells for Ki...Dr. David Greene Arizona
As we watch Dr. Greene's continued efforts and research in Arizona, it's clear that stem cell therapy holds a promising key to unlocking new doors in the treatment of kidney disease. With each study and trial, we step closer to a world where kidney disease is no longer a life sentence but a treatable condition, thanks to pioneers like Dr. David Greene.