Circuits and conductors
•Download as PPT, PDF•
1 like•2,064 views
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive function. Exercise causes chemical changes in the brain that may help protect against mental illness and improve symptoms.
Report
Share
Report
Share
Recommended
Unidad 7 MAGNETISM
Electricity exists in two forms: static electricity and current electricity. Static electricity involves objects developing an electrical charge when rubbed together, causing them to attract or repel depending on whether their charges are the same or different. Current electricity flows through conductors when electrical charges move along a path and requires a closed electric circuit with a power source, conducting wire, and electric device to flow.
Electricity & Magnetism
The document discusses electricity and magnetism. It explains that electric charges create electric fields and moving charges experience magnetic forces. Charges and electric currents produce both electric and magnetic fields, known as electromagnetic fields. Permanent magnets have their own magnetic fields, and magnetism is the properties and interactions of magnets. Electromagnets are magnets created by electric currents in coils. Electric motors use electromagnets and permanent magnets to convert electrical energy to mechanical motion.
Conductor and insulators
Conductors allow heat to move through them easily while insulators do not conduct heat well. Metals like pots and pans are good conductors of heat, while materials like wood, coats, and potholders are effective insulators. The difference is that conductors transfer heat quickly through direct contact, whereas insulators prevent heat from moving between objects and keep things cool or warm.
Electricity (ppt)
This document provides an overview of electricity and electric circuits. It defines key concepts such as current, voltage, resistance, and different circuit arrangements. Some main points:
- Electricity is a form of energy that flows through circuits due to electric charges and potential differences. Current is the flow of electric charges.
- Circuits must be closed loops for current to flow. Components include batteries, wires, switches, and devices. Their symbols are used in circuit diagrams.
- Circuits can be arranged in series or parallel. Series increases overall resistance while parallel decreases it.
- Resistance opposes current flow
Current electricity (electricity)
Electric potential difference is the difference in electric potential or charge between two points, measured in volts. Current is the flow of electric charge measured in amperes. Resistance is a material's tendency to resist electric current flow and is measured in ohms. Ohm's law states that in any electric circuit, the current is directly proportional to the voltage and inversely proportional to the resistance. For example, in a circuit with a voltage of 25V and resistance of 5 ohms, the current would be 5 amps according to Ohm's law.
11 - DC Electricity
This document discusses key concepts related to electric current. It defines current as the flow of charge measured in coulombs per second. It explains how current carries energy based on potential difference and emf. It discusses resistance in terms of control of current flow and introduces Ohm's Law relating voltage, current, and resistance. It also covers calculating power, and how voltage and current are distributed in series and parallel circuits. Key components, circuits, and resistor calculations are also summarized.
Basic current electricity notes (3)
The document discusses different types of electricity sources. Permanent sources like generators in power plants produce large amounts of power, while temporary sources like batteries produce small amounts through electrochemical or chemical reactions and need to be charged (storage cells). Current electricity is defined as the flow of electrons along a pathway from the negative to positive terminal, which needs a complete circuit to flow. Electrical devices in a circuit can be loads that use electricity or have resistance, non-loads that don't use electricity, or safety devices that control the circuit. Conductors allow electron flow while non-conductors prevent it.
Current and electricity
1) Current electricity deals with the motion of charges in conductors like electrons. Electric current is defined as the charge flowing through any cross-section of a conductor per second, with the standard unit being 1 ampere.
2) Materials can be classified as conductors, insulators, or semiconductors based on their conductivity. Conductors have high conductivity while insulators have very low conductivity.
3) Resistance is a measure of the opposition to current flow in a conductor. It is measured in ohms and depends on factors like the material and dimensions of the conductor.
Recommended
Unidad 7 MAGNETISM
Electricity exists in two forms: static electricity and current electricity. Static electricity involves objects developing an electrical charge when rubbed together, causing them to attract or repel depending on whether their charges are the same or different. Current electricity flows through conductors when electrical charges move along a path and requires a closed electric circuit with a power source, conducting wire, and electric device to flow.
Electricity & Magnetism
The document discusses electricity and magnetism. It explains that electric charges create electric fields and moving charges experience magnetic forces. Charges and electric currents produce both electric and magnetic fields, known as electromagnetic fields. Permanent magnets have their own magnetic fields, and magnetism is the properties and interactions of magnets. Electromagnets are magnets created by electric currents in coils. Electric motors use electromagnets and permanent magnets to convert electrical energy to mechanical motion.
Conductor and insulators
Conductors allow heat to move through them easily while insulators do not conduct heat well. Metals like pots and pans are good conductors of heat, while materials like wood, coats, and potholders are effective insulators. The difference is that conductors transfer heat quickly through direct contact, whereas insulators prevent heat from moving between objects and keep things cool or warm.
Electricity (ppt)
This document provides an overview of electricity and electric circuits. It defines key concepts such as current, voltage, resistance, and different circuit arrangements. Some main points:
- Electricity is a form of energy that flows through circuits due to electric charges and potential differences. Current is the flow of electric charges.
- Circuits must be closed loops for current to flow. Components include batteries, wires, switches, and devices. Their symbols are used in circuit diagrams.
- Circuits can be arranged in series or parallel. Series increases overall resistance while parallel decreases it.
- Resistance opposes current flow
Current electricity (electricity)
Electric potential difference is the difference in electric potential or charge between two points, measured in volts. Current is the flow of electric charge measured in amperes. Resistance is a material's tendency to resist electric current flow and is measured in ohms. Ohm's law states that in any electric circuit, the current is directly proportional to the voltage and inversely proportional to the resistance. For example, in a circuit with a voltage of 25V and resistance of 5 ohms, the current would be 5 amps according to Ohm's law.
11 - DC Electricity
This document discusses key concepts related to electric current. It defines current as the flow of charge measured in coulombs per second. It explains how current carries energy based on potential difference and emf. It discusses resistance in terms of control of current flow and introduces Ohm's Law relating voltage, current, and resistance. It also covers calculating power, and how voltage and current are distributed in series and parallel circuits. Key components, circuits, and resistor calculations are also summarized.
Basic current electricity notes (3)
The document discusses different types of electricity sources. Permanent sources like generators in power plants produce large amounts of power, while temporary sources like batteries produce small amounts through electrochemical or chemical reactions and need to be charged (storage cells). Current electricity is defined as the flow of electrons along a pathway from the negative to positive terminal, which needs a complete circuit to flow. Electrical devices in a circuit can be loads that use electricity or have resistance, non-loads that don't use electricity, or safety devices that control the circuit. Conductors allow electron flow while non-conductors prevent it.
Current and electricity
1) Current electricity deals with the motion of charges in conductors like electrons. Electric current is defined as the charge flowing through any cross-section of a conductor per second, with the standard unit being 1 ampere.
2) Materials can be classified as conductors, insulators, or semiconductors based on their conductivity. Conductors have high conductivity while insulators have very low conductivity.
3) Resistance is a measure of the opposition to current flow in a conductor. It is measured in ohms and depends on factors like the material and dimensions of the conductor.
Current electricity
This document provides an introduction to current electricity through a series of experiments and questions using an online circuit simulation. It begins by defining key terms like current, resistance, potential difference and exploring how changing these factors impacts a circuit. Experiments with series circuits demonstrate how closing and opening switches controls current flow. Adding cells in a circuit increases potential difference and current. Parallel circuits allow current to take multiple paths, with the total current equal to the sum of individual parallel branches. The document concludes by having students write their own laws summarizing relationships between circuit components and observations.
Presentation1current electricity
This document discusses Kirchhoff's laws and their use in determining currents and potential differences in electrical circuits. It contains the following key points:
1) Kirchhoff's Current Law (or Junction Law) states that the algebraic sum of currents at any junction is equal to zero.
2) Kirchhoff's Voltage Law (KVL) states that the algebraic sum of the potential differences (voltage drops) around any closed loop in a circuit must be equal to zero.
3) The document provides examples of using Kirchhoff's laws to analyze circuits and calculate unknown currents. It also discusses Wheatstone bridges and Kelvin's method for measuring an unknown resistance.
Electricity
Static electricity builds up charge on objects but does not flow, storing potential energy. Current is the flow of electrons through a conductor, measured in amperes. There are two types of current: direct current flows one way while alternating current reverses direction. Circuits can be series, where all components are on one path, or parallel with multiple branching paths. Conductors easily transmit current while insulators do not. Resistance opposes current flow and is influenced by various material properties. Voltage measures the energy pushing current through a circuit. Ohm's Law defines the relationship between resistance, voltage and current. Electromagnets use current-carrying coils to generate magnetic fields, generators convert mechanical to electrical energy, and motors do the opposite
2m current electricity
1. Kirchhoff's laws describe the conservation of electric charge and energy in electrical circuits. The junction rule states the algebraic sum of currents at any junction is zero, and the loop rule states the algebraic sum of potential differences around any closed loop is zero.
2. The Wheatstone bridge circuit balances when the ratio of the arms is equal to the ratio of the potential drops, allowing the measurement of an unknown resistance.
3. A potentiometer can precisely measure voltage by balancing the unknown voltage from a cell against the potential difference along a known length of a uniform wire carrying a constant current. This allows direct comparison of electrode potentials.
ALL ABOUT ELECTRIC CIRCUITS AND STATIC ELECTRICITY
A good guide for personal or group/class revision. Suggestions and users comments will be appreciated, as this will help me to keep resources to a high standard. Please feedback if you have used any of the resources on sciencetutors.
Current electricity
Ideal for school presentations, and contains a lot of interesting information. This presentation is contains good animations to make it interesting. Please forgive me for the small spelling mistakes that I have made.
Electricity
1. Electric current is measured in amps using an ammeter connected in series in the circuit. In a series circuit, the current is the same at all points. In a parallel circuit, the current splits and the readings on each branch add up to the total current.
2. Voltage is measured in volts using a voltmeter connected in parallel across components. In a series circuit, the voltage drops across each component add up to the total battery voltage. In a parallel circuit, the voltage is the same across each branch.
3. Experiments were conducted to determine the effect of connecting components in series versus parallel on current and voltage. It was found that in a series circuit, the current is the same
Unit 1 Ccurrent Electricity
Current electricity refers to the flow of electric charges through a conductor. For current to flow, a closed circuit is needed consisting of a source of electricity, conducting wires, and a device powered by the electricity. Common sources of current electricity include batteries and generators, which use chemical or mechanical means to provide a continuous supply of moving electric charges through a circuit.
Exp SPA - Chp 17 Current of Electricity
Electric current is the flow of electric charge through a conductor. It is measured in amperes. Current is directly proportional to the rate of flow of charge and inversely proportional to the time taken. Resistance is a measure of how difficult it is for current to flow through a material. It depends on the material's resistivity as well as the conductor's length and cross-sectional area. Ohm's Law states that current is directly proportional to voltage for conductors that obey Ohm's Law. Resistance increases with length or decreases with cross-sectional area for a given material according to the formula for resistivity.
Circuit (symbols,dimmer and brighter)
This document discusses the basics of electricity and electrical circuits. It explains that electricity is the flow of electric charges through a wire, just as water flows through a river. An electrical circuit needs three main components - a power source like a battery, a load such as a light bulb, and wires or other connectors to complete the circuit. It also discusses concepts like open versus closed circuits, and how changing components like batteries or bulbs affects brightness. Symbols are introduced for common circuit elements. Worksheets are included to have the reader draw sample circuits.
Static AND current electricity
1) The document discusses electricity, including static electricity and current electricity. Static electricity is caused by friction which leads to an imbalance of electric charges on two objects. Current electricity refers to the flow of electrons through a closed circuit.
2) A circuit must be present for current electricity to flow, and consists of a generator that supplies energy, conductors like copper wires that allow electricity to flow, electrical components that transform the energy, and switches to open and close the circuit.
3) Static electricity occurs naturally in lightning and when objects are rubbed together, leading the objects to become positively or negatively charged depending on whether they gain or lose electrons.
Nepal Energy Scenario
This presentation is Nepal's current energy scenario which enables public to understand why Nepal is facing acute shortage of power and what are the suggestive measures for the future.
Heating The Earth
Solar radiation provides most of the energy that drives environmental processes on Earth. It warms the atmosphere and surface through various absorption, scattering, and reflection interactions as it passes through the atmosphere. Variations in solar insolation at different latitudes and across seasons are caused by changes in the orientation of the Earth relative to the sun throughout the year.
Ohm's law
The document discusses the basic components and relationships in electrical circuits. It explains that all circuits require a voltage source to provide energy to electrons, a conductor to carry the electrons, and a load or resistance where energy is extracted. It defines key electrical quantities like voltage, current, resistance, and Ohm's Law, which states that current is directly proportional to voltage and inversely proportional to resistance. The document also discusses how internal resistance affects the terminal voltage available from a source.
Heat
Heat is a form of energy that is transferred between objects due to a temperature difference. It can be measured in Joules, though kilocalories and British Thermal Units are also used. Specific heat capacity is the amount of heat needed to change an object's temperature by 1 degree Celsius or Fahrenheit. Heat is absorbed or released during phase changes between solid, liquid and gas without changing temperature. The triple point is where solid, liquid and gas phases coexist in equilibrium. Heat is transferred between objects by conduction, convection or radiation.
Lecture 5 Section 7
This document provides an overview of electricity and magnetism concepts including:
1) It defines electrical charge and discusses how positive and negative charges interact via Coulomb's law, attracting or repelling one another based on their charge.
2) It introduces concepts of electric current and potential difference, and explains their relationship via Ohm's law. High currents can be dangerous or fatal to humans.
3) It describes how electricity and magnetism are related, with electric currents producing magnetic fields and vice versa, leading to applications like electromagnets.
Electricity and Electric Current
Physics Class X Electric Current
Contents
1 Electricity
2 Electric Current
3 Electric Potential & Potential Difference
4 Electromotive Force (emf)
5 Electric Circuit and components
6 Current and Voltage Measurements
7 OHM’s Law
8 Factors Affecting Resistance
9 Combination of Resistors(Series & Parallel)
10 Heating Effect of Electricity and its apps.
CURRENT ELECTRICITY NOTES BY ANURAG TYAGI CLASSES,GHAZIABAD(ATC)
ANURAG TYAGI CLASSES (ATC) is an organisation destined to orient students into correct path to achieve
success in IIT-JEE, AIEEE, PMT, CBSE & ICSE board classes. The organisation is run by a competitive staff comprising of Ex-IITians. Our goal at ATC is to create an environment that inspires students to recognise and explore their own potentials and build up confidence in themselves.ATC was founded by Mr. ANURAG TYAGI on 19 march, 2001.
MEET US AT:
www.anuragtyagiclasses.com
Electrostatics and Current Electricity
1) The document discusses static electricity and electric current. It explains how charging by friction can create static electricity and defines electric current as the rate of flow of electric charge.
2) Key concepts covered include the structure of atoms, charging by transferring electrons between materials, and how static charge is held on insulators while current involves the flow of electrons in conductors.
3) The document provides examples of current in series and parallel circuits, noting that current is the same everywhere in a series circuit while the total current entering a parallel junction equals the sum of the currents in the branches.
Unit 3 Notes
Electricity is generated from primary energy sources through conversion processes and distributed as electrical power. It can be produced using various methods that exploit electromagnetic induction, the photoelectric effect, thermoelectric and piezoelectric effects, and chemical reactions. Common devices like generators, solar cells, thermocouples, piezoelectric cells, and batteries are used to convert different forms of energy into electrical current based on these underlying principles and effects. Electricity then flows through circuits, with the characteristics of current, voltage, and resistance following relationships defined by Ohm's law.
The secret of light Itziar
A shadow is formed when an opaque object blocks light from passing through, creating a dark area. Light hits the opaque object and does not pass through, causing a shadow to occur behind the object. The document discusses what a shadow is, how it is formed when light hits an opaque object and does not pass through, creating a dark area, and the materials involved in forming a shadow.
More Related Content
Viewers also liked
Current electricity
This document provides an introduction to current electricity through a series of experiments and questions using an online circuit simulation. It begins by defining key terms like current, resistance, potential difference and exploring how changing these factors impacts a circuit. Experiments with series circuits demonstrate how closing and opening switches controls current flow. Adding cells in a circuit increases potential difference and current. Parallel circuits allow current to take multiple paths, with the total current equal to the sum of individual parallel branches. The document concludes by having students write their own laws summarizing relationships between circuit components and observations.
Presentation1current electricity
This document discusses Kirchhoff's laws and their use in determining currents and potential differences in electrical circuits. It contains the following key points:
1) Kirchhoff's Current Law (or Junction Law) states that the algebraic sum of currents at any junction is equal to zero.
2) Kirchhoff's Voltage Law (KVL) states that the algebraic sum of the potential differences (voltage drops) around any closed loop in a circuit must be equal to zero.
3) The document provides examples of using Kirchhoff's laws to analyze circuits and calculate unknown currents. It also discusses Wheatstone bridges and Kelvin's method for measuring an unknown resistance.
Electricity
Static electricity builds up charge on objects but does not flow, storing potential energy. Current is the flow of electrons through a conductor, measured in amperes. There are two types of current: direct current flows one way while alternating current reverses direction. Circuits can be series, where all components are on one path, or parallel with multiple branching paths. Conductors easily transmit current while insulators do not. Resistance opposes current flow and is influenced by various material properties. Voltage measures the energy pushing current through a circuit. Ohm's Law defines the relationship between resistance, voltage and current. Electromagnets use current-carrying coils to generate magnetic fields, generators convert mechanical to electrical energy, and motors do the opposite
2m current electricity
1. Kirchhoff's laws describe the conservation of electric charge and energy in electrical circuits. The junction rule states the algebraic sum of currents at any junction is zero, and the loop rule states the algebraic sum of potential differences around any closed loop is zero.
2. The Wheatstone bridge circuit balances when the ratio of the arms is equal to the ratio of the potential drops, allowing the measurement of an unknown resistance.
3. A potentiometer can precisely measure voltage by balancing the unknown voltage from a cell against the potential difference along a known length of a uniform wire carrying a constant current. This allows direct comparison of electrode potentials.
ALL ABOUT ELECTRIC CIRCUITS AND STATIC ELECTRICITY
A good guide for personal or group/class revision. Suggestions and users comments will be appreciated, as this will help me to keep resources to a high standard. Please feedback if you have used any of the resources on sciencetutors.
Current electricity
Ideal for school presentations, and contains a lot of interesting information. This presentation is contains good animations to make it interesting. Please forgive me for the small spelling mistakes that I have made.
Electricity
1. Electric current is measured in amps using an ammeter connected in series in the circuit. In a series circuit, the current is the same at all points. In a parallel circuit, the current splits and the readings on each branch add up to the total current.
2. Voltage is measured in volts using a voltmeter connected in parallel across components. In a series circuit, the voltage drops across each component add up to the total battery voltage. In a parallel circuit, the voltage is the same across each branch.
3. Experiments were conducted to determine the effect of connecting components in series versus parallel on current and voltage. It was found that in a series circuit, the current is the same
Unit 1 Ccurrent Electricity
Current electricity refers to the flow of electric charges through a conductor. For current to flow, a closed circuit is needed consisting of a source of electricity, conducting wires, and a device powered by the electricity. Common sources of current electricity include batteries and generators, which use chemical or mechanical means to provide a continuous supply of moving electric charges through a circuit.
Exp SPA - Chp 17 Current of Electricity
Electric current is the flow of electric charge through a conductor. It is measured in amperes. Current is directly proportional to the rate of flow of charge and inversely proportional to the time taken. Resistance is a measure of how difficult it is for current to flow through a material. It depends on the material's resistivity as well as the conductor's length and cross-sectional area. Ohm's Law states that current is directly proportional to voltage for conductors that obey Ohm's Law. Resistance increases with length or decreases with cross-sectional area for a given material according to the formula for resistivity.
Circuit (symbols,dimmer and brighter)
This document discusses the basics of electricity and electrical circuits. It explains that electricity is the flow of electric charges through a wire, just as water flows through a river. An electrical circuit needs three main components - a power source like a battery, a load such as a light bulb, and wires or other connectors to complete the circuit. It also discusses concepts like open versus closed circuits, and how changing components like batteries or bulbs affects brightness. Symbols are introduced for common circuit elements. Worksheets are included to have the reader draw sample circuits.
Static AND current electricity
1) The document discusses electricity, including static electricity and current electricity. Static electricity is caused by friction which leads to an imbalance of electric charges on two objects. Current electricity refers to the flow of electrons through a closed circuit.
2) A circuit must be present for current electricity to flow, and consists of a generator that supplies energy, conductors like copper wires that allow electricity to flow, electrical components that transform the energy, and switches to open and close the circuit.
3) Static electricity occurs naturally in lightning and when objects are rubbed together, leading the objects to become positively or negatively charged depending on whether they gain or lose electrons.
Nepal Energy Scenario
This presentation is Nepal's current energy scenario which enables public to understand why Nepal is facing acute shortage of power and what are the suggestive measures for the future.
Heating The Earth
Solar radiation provides most of the energy that drives environmental processes on Earth. It warms the atmosphere and surface through various absorption, scattering, and reflection interactions as it passes through the atmosphere. Variations in solar insolation at different latitudes and across seasons are caused by changes in the orientation of the Earth relative to the sun throughout the year.
Ohm's law
The document discusses the basic components and relationships in electrical circuits. It explains that all circuits require a voltage source to provide energy to electrons, a conductor to carry the electrons, and a load or resistance where energy is extracted. It defines key electrical quantities like voltage, current, resistance, and Ohm's Law, which states that current is directly proportional to voltage and inversely proportional to resistance. The document also discusses how internal resistance affects the terminal voltage available from a source.
Heat
Heat is a form of energy that is transferred between objects due to a temperature difference. It can be measured in Joules, though kilocalories and British Thermal Units are also used. Specific heat capacity is the amount of heat needed to change an object's temperature by 1 degree Celsius or Fahrenheit. Heat is absorbed or released during phase changes between solid, liquid and gas without changing temperature. The triple point is where solid, liquid and gas phases coexist in equilibrium. Heat is transferred between objects by conduction, convection or radiation.
Lecture 5 Section 7
This document provides an overview of electricity and magnetism concepts including:
1) It defines electrical charge and discusses how positive and negative charges interact via Coulomb's law, attracting or repelling one another based on their charge.
2) It introduces concepts of electric current and potential difference, and explains their relationship via Ohm's law. High currents can be dangerous or fatal to humans.
3) It describes how electricity and magnetism are related, with electric currents producing magnetic fields and vice versa, leading to applications like electromagnets.
Electricity and Electric Current
Physics Class X Electric Current
Contents
1 Electricity
2 Electric Current
3 Electric Potential & Potential Difference
4 Electromotive Force (emf)
5 Electric Circuit and components
6 Current and Voltage Measurements
7 OHM’s Law
8 Factors Affecting Resistance
9 Combination of Resistors(Series & Parallel)
10 Heating Effect of Electricity and its apps.
CURRENT ELECTRICITY NOTES BY ANURAG TYAGI CLASSES,GHAZIABAD(ATC)
ANURAG TYAGI CLASSES (ATC) is an organisation destined to orient students into correct path to achieve
success in IIT-JEE, AIEEE, PMT, CBSE & ICSE board classes. The organisation is run by a competitive staff comprising of Ex-IITians. Our goal at ATC is to create an environment that inspires students to recognise and explore their own potentials and build up confidence in themselves.ATC was founded by Mr. ANURAG TYAGI on 19 march, 2001.
MEET US AT:
www.anuragtyagiclasses.com
Electrostatics and Current Electricity
1) The document discusses static electricity and electric current. It explains how charging by friction can create static electricity and defines electric current as the rate of flow of electric charge.
2) Key concepts covered include the structure of atoms, charging by transferring electrons between materials, and how static charge is held on insulators while current involves the flow of electrons in conductors.
3) The document provides examples of current in series and parallel circuits, noting that current is the same everywhere in a series circuit while the total current entering a parallel junction equals the sum of the currents in the branches.
Unit 3 Notes
Electricity is generated from primary energy sources through conversion processes and distributed as electrical power. It can be produced using various methods that exploit electromagnetic induction, the photoelectric effect, thermoelectric and piezoelectric effects, and chemical reactions. Common devices like generators, solar cells, thermocouples, piezoelectric cells, and batteries are used to convert different forms of energy into electrical current based on these underlying principles and effects. Electricity then flows through circuits, with the characteristics of current, voltage, and resistance following relationships defined by Ohm's law.
Viewers also liked (20)
ALL ABOUT ELECTRIC CIRCUITS AND STATIC ELECTRICITY
ALL ABOUT ELECTRIC CIRCUITS AND STATIC ELECTRICITY
CURRENT ELECTRICITY NOTES BY ANURAG TYAGI CLASSES,GHAZIABAD(ATC)
CURRENT ELECTRICITY NOTES BY ANURAG TYAGI CLASSES,GHAZIABAD(ATC)
More from isamadero79
The secret of light Itziar
A shadow is formed when an opaque object blocks light from passing through, creating a dark area. Light hits the opaque object and does not pass through, causing a shadow to occur behind the object. The document discusses what a shadow is, how it is formed when light hits an opaque object and does not pass through, creating a dark area, and the materials involved in forming a shadow.
Sound
This document teaches that sounds are made when objects or materials vibrate. It provides examples of how different instruments produce sound through vibration, such as drums vibrating when hit, trumpets vibrating when blown into, and guitar strings vibrating when plucked. The document encourages investigations into how grains of rice on a drum skin or an elastic band over a box will vibrate when the drum skin is beaten or the elastic band is plucked. The overarching message is that vibration of objects and materials is responsible for the production of sound.
Shadows Sofía
A shadow is a dark area or shape created when an object blocks light rays from a source, with closer objects creating larger shadows and farther objects creating smaller shadows. Light travels in straight lines from its source, and when those rays are blocked by an object, the non-lit area behind it is the shadow.
Shadows oOalla
Light rays travel in straight lines, and shadows are formed when an opaque or translucent object blocks light from a source. The type of object determines whether light is absorbed, reflected, passes through partially, or passes through easily. An object's distance from the light source impacts the size of its shadow, with shadows becoming bigger when closer to the source and smaller when further away.
Presentación del centro
Este documento proporciona datos básicos sobre el C.E.I.P. Nuestra Señora de la Salud, incluyendo detalles sobre sus instalaciones, personal, alumnado, servicios ofrecidos, proyectos TIC, y órganos de representación de padres. El centro cuenta con aulas, comedor, zonas exteriores y recursos digitales para sus alumnos de educación infantil y primaria.
Shadows by Lucy AR
Light rays travel in straight lines from a light source. If an opaque object blocks these rays, a shadow is formed where the light cannot reach. Moving the light source closer to an object causes it to block more light, resulting in a larger shadow, while moving it farther away blocks less light and produces a smaller shadow.
Sound 2
This document teaches that sounds are made when objects or materials vibrate. It provides examples of how different instruments produce sound through vibration, such as drums vibrating when hit, trumpets vibrating when air is blown through, and guitar strings vibrating when plucked. The document encourages investigations into how grains of rice on a drum skin or an elastic band over a box vibrate when the drum skin is beaten or the elastic band is plucked. The overall aim is to learn that vibration of objects and materials causes sound.
LIGHT 1
This document discusses light sources and how light travels. The main points are:
- The sun is our primary natural light source. Other light sources can be natural or man-made. The moon, water, and mirrors are not true light sources as they only reflect light.
- Light travels in straight lines. When it hits an opaque object, some light is absorbed and the rest is reflected. Transparent objects allow light to pass through, while translucent objects let some light pass through and reflect the rest.
- For us to see, light enters the eye and is focused on the retina. The retina sends this visual information to the brain via the optic nerve to be interpreted. Color is the result of
Transparent, translucent and opaque
The document discusses three categories of objects - transparent, translucent, and opaque - and asks why certain properties are important for each. Transparent objects allow clear visibility, translucent objects only partially block light, and opaque objects do not allow any light through. Students are asked to sort objects into these categories and create a poster showing their findings.
Light experiments
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive function. Exercise causes chemical changes in the brain that may help protect against mental illness and improve symptoms.
Will this circuit_work
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive functioning. Exercise causes chemical changes in the brain that may help protect against mental illness and improve symptoms.
Batteries
This document discusses batteries and appliances that use batteries. It explains that batteries store electricity and can be inserted into appliances to power them without being plugged in. Batteries come in different sizes and shapes and each appliance requires the correct type of battery. The document emphasizes that batteries must be inserted into appliances properly, with the positive (+) and negative (-) ends in the right orientation, for the appliance to work. A torch is given as an example appliance that uses batteries to power a light bulb.
Electricity
The document discusses electricity and the different forms of energy it can be converted into. It explains that electricity powers many appliances in homes and has become essential to daily life. Examples are given of mains electricity and batteries providing electrical energy that is then converted by appliances into heat, light, sound, and movement energy through processes like warming food, lighting rooms, playing music, and powering motors. Students are asked to identify examples of appliances that convert electricity into these different types of energy.
Endocrine system
The document discusses the endocrine system, which regulates hormones and affects mood, growth, development, and metabolism. It describes the main glands of the endocrine system, including the hypothalamus, pituitary gland, thyroid gland, adrenal glands, pineal gland, and reproductive glands. The pituitary gland is called the "master gland" because it controls other glands by producing hormones. Problems can arise if glands produce too much or too little of certain hormones.
Ocean ecosystem
The document discusses ecosystems in the world's five oceans, including temperature ranges, common habitats, types of plants like kelp and seaweed, and animals including carnivores like sharks and herbivores like clams. It also lists non-living components of ocean ecosystems like water, salt, gases, and rocks. Examples of food chains and webs in oceans are provided.
Nervous system
The central nervous system controls all of the body's activities and consists of the brain and spinal cord. The brain controls everything in the body and is divided into three main parts - the cerebrum, cerebellum, and brain stem. The cerebrum controls functions like thinking, memory, and movement. The cerebellum controls balance and posture. The brain stem connects the brain to the spinal cord and controls vital functions. The outer nervous system connects the central nervous system to the rest of the body through nerves and sense organs like the eyes, ears, skin, and tongue. It controls automatic reflexes and functions we don't consciously think about.
Rainforest. mary s and joaquín
Tropical rainforests have a climate with no dry season, with rainfall heavy and frequent throughout the year. The habitat supports a variety of plants and animals, with factors like soil, temperature, light, food and predators influencing what can live there. The rainforest is home to over half the world's animal species across its four layers, from tiny insects to large mammals. Non-living elements like soil, rocks, water and sunlight also make up the rainforest environment.
More from isamadero79 (20)
Recently uploaded
Andreas Schleicher presents PISA 2022 Volume III - Creative Thinking - 18 Jun...
Andreas Schleicher, Director of Education and Skills at the OECD presents at the launch of PISA 2022 Volume III - Creative Minds, Creative Schools on 18 June 2024.
Philippine Edukasyong Pantahanan at Pangkabuhayan (EPP) Curriculum
(𝐓𝐋𝐄 𝟏𝟎𝟎) (𝐋𝐞𝐬𝐬𝐨𝐧 𝟏)-𝐏𝐫𝐞𝐥𝐢𝐦𝐬
𝐃𝐢𝐬𝐜𝐮𝐬𝐬 𝐭𝐡𝐞 𝐄𝐏𝐏 𝐂𝐮𝐫𝐫𝐢𝐜𝐮𝐥𝐮𝐦 𝐢𝐧 𝐭𝐡𝐞 𝐏𝐡𝐢𝐥𝐢𝐩𝐩𝐢𝐧𝐞𝐬:
- Understand the goals and objectives of the Edukasyong Pantahanan at Pangkabuhayan (EPP) curriculum, recognizing its importance in fostering practical life skills and values among students. Students will also be able to identify the key components and subjects covered, such as agriculture, home economics, industrial arts, and information and communication technology.
𝐄𝐱𝐩𝐥𝐚𝐢𝐧 𝐭𝐡𝐞 𝐍𝐚𝐭𝐮𝐫𝐞 𝐚𝐧𝐝 𝐒𝐜𝐨𝐩𝐞 𝐨𝐟 𝐚𝐧 𝐄𝐧𝐭𝐫𝐞𝐩𝐫𝐞𝐧𝐞𝐮𝐫:
-Define entrepreneurship, distinguishing it from general business activities by emphasizing its focus on innovation, risk-taking, and value creation. Students will describe the characteristics and traits of successful entrepreneurs, including their roles and responsibilities, and discuss the broader economic and social impacts of entrepreneurial activities on both local and global scales.
Educational Technology in the Health Sciences
Plenary presentation at the NTTC Inter-university Workshop, 18 June 2024, Manila Prince Hotel.
Pengantar Penggunaan Flutter - Dart programming language1.pptx
Pengantar Penggunaan Flutter - Dart programming language1.pptx
مصحف القراءات العشر أعد أحرف الخلاف سمير بسيوني.pdf
مصحف أحرف الخلاف للقراء العشرةأعد أحرف الخلاف بالتلوين وصلا سمير بسيوني غفر الله له
Benner "Expanding Pathways to Publishing Careers"
This presentation was provided by Rebecca Benner, Ph.D., of the American Society of Anesthesiologists, for the second session of NISO's 2024 Training Series "DEIA in the Scholarly Landscape." Session Two: 'Expanding Pathways to Publishing Careers,' was held June 13, 2024.
Stack Memory Organization of 8086 Microprocessor
The stack memory organization of 8086 microprocessor.
HYPERTENSION - SLIDE SHARE PRESENTATION.
IT WILL BE HELPFULL FOR THE NUSING STUDENTS
IT FOCUSED ON MEDICAL MANAGEMENT AND NURSING MANAGEMENT.
HIGHLIGHTS ON HEALTH EDUCATION.
Chapter wise All Notes of First year Basic Civil Engineering.pptx
Chapter wise All Notes of First year Basic Civil Engineering
Syllabus
Chapter-1
Introduction to objective, scope and outcome the subject
Chapter 2
Introduction: Scope and Specialization of Civil Engineering, Role of civil Engineer in Society, Impact of infrastructural development on economy of country.
Chapter 3
Surveying: Object Principles & Types of Surveying; Site Plans, Plans & Maps; Scales & Unit of different Measurements.
Linear Measurements: Instruments used. Linear Measurement by Tape, Ranging out Survey Lines and overcoming Obstructions; Measurements on sloping ground; Tape corrections, conventional symbols. Angular Measurements: Instruments used; Introduction to Compass Surveying, Bearings and Longitude & Latitude of a Line, Introduction to total station.
Levelling: Instrument used Object of levelling, Methods of levelling in brief, and Contour maps.
Chapter 4
Buildings: Selection of site for Buildings, Layout of Building Plan, Types of buildings, Plinth area, carpet area, floor space index, Introduction to building byelaws, concept of sun light & ventilation. Components of Buildings & their functions, Basic concept of R.C.C., Introduction to types of foundation
Chapter 5
Transportation: Introduction to Transportation Engineering; Traffic and Road Safety: Types and Characteristics of Various Modes of Transportation; Various Road Traffic Signs, Causes of Accidents and Road Safety Measures.
Chapter 6
Environmental Engineering: Environmental Pollution, Environmental Acts and Regulations, Functional Concepts of Ecology, Basics of Species, Biodiversity, Ecosystem, Hydrological Cycle; Chemical Cycles: Carbon, Nitrogen & Phosphorus; Energy Flow in Ecosystems.
Water Pollution: Water Quality standards, Introduction to Treatment & Disposal of Waste Water. Reuse and Saving of Water, Rain Water Harvesting. Solid Waste Management: Classification of Solid Waste, Collection, Transportation and Disposal of Solid. Recycling of Solid Waste: Energy Recovery, Sanitary Landfill, On-Site Sanitation. Air & Noise Pollution: Primary and Secondary air pollutants, Harmful effects of Air Pollution, Control of Air Pollution. . Noise Pollution Harmful Effects of noise pollution, control of noise pollution, Global warming & Climate Change, Ozone depletion, Greenhouse effect
Text Books:
1. Palancharmy, Basic Civil Engineering, McGraw Hill publishers.
2. Satheesh Gopi, Basic Civil Engineering, Pearson Publishers.
3. Ketki Rangwala Dalal, Essentials of Civil Engineering, Charotar Publishing House.
4. BCP, Surveying volume 1
How to Setup Warehouse & Location in Odoo 17 Inventory
In this slide, we'll explore how to set up warehouses and locations in Odoo 17 Inventory. This will help us manage our stock effectively, track inventory levels, and streamline warehouse operations.
A Visual Guide to 1 Samuel | A Tale of Two Hearts
These slides walk through the story of 1 Samuel. Samuel is the last judge of Israel. The people reject God and want a king. Saul is anointed as the first king, but he is not a good king. David, the shepherd boy is anointed and Saul is envious of him. David shows honor while Saul continues to self destruct.
Temple of Asclepius in Thrace. Excavation results
The temple and the sanctuary around were dedicated to Asklepios Zmidrenus. This name has been known since 1875 when an inscription dedicated to him was discovered in Rome. The inscription is dated in 227 AD and was left by soldiers originating from the city of Philippopolis (modern Plovdiv).
Mule event processing models | MuleSoft Mysore Meetup #47
Mule event processing models | MuleSoft Mysore Meetup #47
Event Link:- https://meetups.mulesoft.com/events/details/mulesoft-mysore-presents-mule-event-processing-models/
Agenda
● What is event processing in MuleSoft?
● Types of event processing models in Mule 4
● Distinction between the reactive, parallel, blocking & non-blocking processing
For Upcoming Meetups Join Mysore Meetup Group - https://meetups.mulesoft.com/mysore/YouTube:- youtube.com/@mulesoftmysore
Mysore WhatsApp group:- https://chat.whatsapp.com/EhqtHtCC75vCAX7gaO842N
Speaker:-
Shivani Yasaswi - https://www.linkedin.com/in/shivaniyasaswi/
Organizers:-
Shubham Chaurasia - https://www.linkedin.com/in/shubhamchaurasia1/
Giridhar Meka - https://www.linkedin.com/in/giridharmeka
Priya Shaw - https://www.linkedin.com/in/priya-shaw
Recently uploaded (20)
Andreas Schleicher presents PISA 2022 Volume III - Creative Thinking - 18 Jun...
Andreas Schleicher presents PISA 2022 Volume III - Creative Thinking - 18 Jun...
Philippine Edukasyong Pantahanan at Pangkabuhayan (EPP) Curriculum
Philippine Edukasyong Pantahanan at Pangkabuhayan (EPP) Curriculum
Pengantar Penggunaan Flutter - Dart programming language1.pptx
Pengantar Penggunaan Flutter - Dart programming language1.pptx
مصحف القراءات العشر أعد أحرف الخلاف سمير بسيوني.pdf
مصحف القراءات العشر أعد أحرف الخلاف سمير بسيوني.pdf
spot a liar (Haiqa 146).pptx Technical writhing and presentation skills
spot a liar (Haiqa 146).pptx Technical writhing and presentation skills
Chapter wise All Notes of First year Basic Civil Engineering.pptx
Chapter wise All Notes of First year Basic Civil Engineering.pptx
How to Setup Warehouse & Location in Odoo 17 Inventory
How to Setup Warehouse & Location in Odoo 17 Inventory
Mule event processing models | MuleSoft Mysore Meetup #47
Mule event processing models | MuleSoft Mysore Meetup #47