This document discusses three categories of work systems: 1) Manual work systems where workers perform tasks without powered tools. 2) Worker-machine systems where human workers operate powered equipment. 3) Automated work systems where processes are performed without direct human participation. It provides examples and definitions for different types of work units, operations, and powered equipment. The document also covers topics like cycle time analysis, standard times, and different levels of automation.

1. Manual Work & Worker-Machine
Systems
Sections:
1. Manual Work Systems
2. Worker-Machine Systems
3. Automated Work Systems
4. Determining Worker and Machine
Requirements
5. Machine Clusters
Chapter 2

2. Three Categories of Work Systems
1. Manual work system
 Worker performing one or more tasks
without the aid of powered tools
2. Worker-machine system
 Human worker operates powered
equipment
3. Automated work system
 Process performed without the direct
participation of a human worker

3. Manual Work System

4. Worker-Machine System

5. Automated System

6. Some Definitions
Work unit – the object that is processed by the work
system
 Workpiece being machined (production work)
 Material being moved (logistics work)
 Customer in a store (service work)
 Product being designed (knowledge work)
Unit operations – tasks and processes that are
treated as being independent of other work
activities

7. Manual Work Systems
Human body accomplishing some physical task
without an external source of power
 With or without hand tools
 When hand tools are used, the power to
operate them is derived from the strength of a
human worker
 Other human faculties are required, such as hand-
eye coordination and mental effort

8. Pure Manual Work
Involves the physical and mental capabilities of the
human worker, and no machines, tools, or other
implements are employed in performing the task.
 Material handler moving cartons in a warehouse
 Workers loading furniture into a moving van without
the use of dollies
 Dealer at a casino table dealing cards
 Office worker filing documents
 Assembly worker snap-fitting two parts together

9. Manual Work with Hand Tools
Manual tasks are commonly improved by the use of
hand tools. A tool is a device or implement for
making changes to some object (e.g., the work
unit), such as cutting, grinding, striking, squeezing,
or other process. A hand tool is a small tool that is
operated by the strength and skill of the human
user. Examples of manual tasks involving the use of
hand tools include the following:
 Machinist filing a part
 Assembly worker using screwdriver
 Painter using paintbrush to paint door trim
 QC inspector using micrometer to measure a shaft
diameter

10. Repetitive vs. Nonrepetitive Tasks
 Repetitive Task
 Relatively short duration (usually a few
minutes or less)
 High degree of similarity from one cycle to
the next
 Nonrepetitive Task
 Takes a long time
 Work cycles are not similar

11. Cycle Time Variations
 A main objective in work design is to determine the one
best method for a task, and then to standardize its use
 Once the method has been standardized, the actual time
to perform the task is a variable because of:
 Differences in worker performance
 differences in hand and body motions
 Mistakes by worker
 Variations in starting work units
 The learning curve phenomenon
 Differences in the physical and cognitive attributes
among workers performing the task
 Variations in the methods used by different workers to
perform the task

12. Worker Performance
Defined as the pace or relative speed of working
 As worker performance increases, cycle time
decreases
 From the employer’s viewpoint, it is desirable for
worker performance to be high
 What is a reasonable pace to expect from a
worker?

13. Normal Performance
A pace of working that can be maintained by a
properly trained average worker throughout an
entire work shift without injurious effect on the
worker’s health or physical well-being
 The work shift is usually 8 hours, during which
periodic rest breaks are allowed
 Normal performance = 100% performance
 Common benchmark of normal performance:
 Walking at 3 miles/hr

14. Normal Time
 The time to complete a task when working at
normal performance
 Actual time to perform the cycle depends on
worker performance
Tc = Tn / Pw
where Tc = cycle time, Tn = normal time, and
Pw = worker performance or pace

15. Example: Normal Performance
 Given: A man walks in the early morning for health
and fitness. His usual route is 1.85 miles. A typical
time is 30 min. The benchmark of normal
performance = 3 miles/hr.
 Determine: (a) how long the route would take at
normal performance and (b) the man’s performance
when he completes the route in 30 min.

16. Example: Solution
(a) At 3 miles/hr, time = 1.85 miles / 3 miles/hr
= 0.6167 hr = 37 min
(b) Rearranging equation, Pw = Tn / Tc
Pw = 37 min / 30 min = 1.233 = 123.3 %
Alternative approach in (b):
Using velocity = 1.85 miles / 0.5 hr = 3.7 miles/hr
Pw = 3.7 miles/hr / 3.0 miles/hr = 1.233 %

17. Standard Performance
Same as normal performance, but acknowledges
that periodic rest breaks must be taken by the
worker
 Periodic rest breaks are allowed during the work
shift
 Federal law requires employer to pay the
worker during these breaks
 Other interruptions and delays also occur during
the shift

18. PFD Allowance
To account for the delays due to:
 Personal time (P)
 Bathroom breaks, personal phone calls
 Fatigue (F)
 Rest breaks are intended to deal with fatigue
 Delays (D)
 Interruptions, equipment breakdowns

19. Standard Time
Defined as the normal time but with an allowance
added in to account for losses due to personal
time, fatigue, and delays
Tstd = Tn (1 + Apfd)
where Tstd = standard time, Tn = normal time, and
Apfd = PFD allowance factor
 Also called the allowed time

20. Irregular Work Elements
 Elements that are performed with a frequency of
less than once per cycle
 Examples:
 periodic changing of tools (e.g., changing a
knife blade)
 Irregular elements are prorated into the regular
cycle according to their frequency

21. Example: Determining Standard
Time
 Given: The normal time to perform the regular work
cycle is 3.23 min. In addition, an irregular work
element with a normal time = 1.25 min is performed
every 5 cycles. The PFD allowance factor is 15%.
 Determine (a) the standard time and (b) the number of
work units produced during an 8-hr shift if the worker's
pace is consistent with standard performance.

25. Standard Hours and Worker
Efficiency
 Two common measures of worker productivity used in
industry to assess a worker’s productivity are standard
hours and worker efficiency
Standard hours – represents the amount of work actually
accomplished
Hstd = Q Tstd
Hstd = standard hours accomplished; Q = quantity of work
units completed; Tstd = standard time per work unit
Worker efficiency – work accomplished as a proportion of
shift hours
Ew = Hstd / Hsh
Ew = worker efficiency; Hstd = # of standard hours of work
accomplished; Hsh = # of shift hours (8 hr)

28. Worker efficiency
 Worker efficiency is commonly used to evaluate
workers in industry.
 In many incentive wage payment plans, the worker’s
earnings are based on his or her efficiency or the
number of standard hours accomplished.
 Worker efficiency and standard hours are easily
computed, because the number of hours in the shift
and the standard time are known, and the number of
work units produced can be readily counted.

29. Worker-Machine Systems
 When worker operates a powered equipment we
refer to the arrangement as a worker-machine
system.
 Examples:
 Machinist operating a milling machine
 Factory worker loading and unloading parts at
a machine tool.
 Truck driver driving an 18-wheel tractor-trailer
 Worker crew operating a rolling mill that
converts hot steel blocks into flat plates.
 Clerical worker entering data into a PC

30. Types of Powered Equipment
Distinguished from hand tools by the fact that a source of power
other than human strength is used to operate it. Common power
sources are electric, pneumatic, hydraulic, and fossil fuel motors
1. Portable power tools are light enough in weight
 portable power drills, rotary saws, chain saws, and electric
hedge trimmers.
2. Mobile powered equipment are generally heavy pieces of
equipment
 Transportation equipment, agricultural and lawn-keeping,
forklift trucks, electric power generator at construction site
3. Stationary powered machines stand on the floor or ground
and cannot be moved while they are operating
 Machine tools (e.g., turning, drilling, milling); office
equipment (personal computers, photocopiers, telephones,
fax machines); cash registers, heat treatment furnaces

31. Classification of Powered
Machinery

32. Numbers of Workers and Machines
Means of classifying worker-machine systems is according to
whether there are one or more workers and one or more machines
One worker and
One machine
 Taxicab driver and
taxi
One worker & Multiple
machines
 A worker tending
several production
machines
Multiple workers and
One machine
 Ship's crew
Multiple workers and
Multiple machines
 Emergency repair
crew responding to
machine breakdowns
in a factory

33. One Worker and One Machine
Good work design attempts to achieve the following
objectives:
 Design the controls of the machine to be logical and
easy to operate for the worker.
 Design the work sequence so that as much of the
worker’s task as possible can be accomplished
while the machine is operating, thereby minimizing
worker idle time.
 Minimize the idle times of both the worker and the
machine.
 Design the task and the machine to be safe for the
worker.

34. Level of Operator Attention
 Full-time attention
 Welders performing arc welding
 Part-time attention during each work cycle
 Worker loading and unloading a production
machine on semi-automatic cycle
 Periodic attention with regular servicing
 Crane operator in steel mill
 Periodic attention with random servicing
 Firefighters responding to alarms

35. Two welders
performing arc
welding on pipe
- requires full-
time attention of
workers (photo
courtesy of
Lincoln Electric
Co.)

36. Cycle Time Analysis in Worker
Machine System
In terms of cycle time analysis, worker-machine
systems fall into two categories:
(1) systems in which the machine time depends on
operator control, the task can be either repetitive or
nonrepetitive
(2) systems in which the machine time is constant and
independent of operator control, and the work cycle is
repetitive.

37. Cycle Time with no Overlap between
Worker and Machine
 If there is no overlap in work elements between the worker
and the machine, then the normal time for the cycle is
simply the sum of their respective normal times:
 Normal time for cycle
Tn = Tnw + Tm
Where Tnw = normal time for the worker-controlled portion of the cycle,
min: and Tm = machine cycle time (assumed constant).
 Standard time for cycle
Tstd = Tnw (1 + Apfd) + Tm (1 + Am)
where Tnw = normal time of the worker, min; Tm = constant time for the
machine cycle, min; Am = machine allowance factor, used in the
equation as a decimal fraction

41. Worker-Machine Systems with
Internal Work Elements
 In the operation of a worker-machine system, it is
important to distinguish between the operator’s work
elements that are performed in succession with the
machine’s work elements and those that are
performed simultaneously with the machine elements.
 Operator elements that are performed sequentially
are called external work elements while those that
are performed simultaneously with the machine cycle
are called internal work elements.

42. Example 2.10 Internal Versus External
Work Elements in Cycle Time Analysis
 The work cycle in a worker-machine system
consists of the elements and associated times
given in the table below.
 All of the operator’s work elements are external
to the machine time.
 Can some of the worker’s elements be made
internal to the machine cycle, and if so, what is
the expected cycle time for the operation?

45. Comment
 Although the total times for the worker and the machine are
the same as before, element 4 in the revised cycle (which
Consists of elements 1, 2, and 6 from the original work
cycle) is performed simultaneously with the machine time,
resulting in the following new cycle time:
Tc = 0.10 + 0.12 + 0.75 = 0.97 min
 This represents a 34% reduction in cycle time, which
translates into a 53% increase in production rate.
 When internal elements are present in the work cycle, it
must then be determined whether the machine cycle time
or the sum of the worker’s internal elements take longer.

46. Automated Work Systems
Automation is the technology by which a process
or procedure is accomplished without human
assistance
 Implemented using a program of instructions
combined with a control system that executes
the instructions
 Power is required to drive the process and
operate the control system

47. Levels of Automated Systems
 Semiautomated machine
 Performs a portion of the work cycle under
some form of program control
 Human worker tends the machine for the
remainder of the cycle, by loading and
unloading it
 Operator must be present every cycle
 Fully automated machine
 Operates for extended periods of time with
no human attention

48. Automated
robotic
spot
welding
cell (photo
courtesy of
Ford Motor
Company)