The document discusses alternating current (AC) and direct current (DC). It defines AC as current that reverses direction periodically and describes its generation from sources like power plants. Key aspects of AC covered include its sinusoidal waveform, frequency, peak and RMS values. Phasors are introduced as a way to represent AC quantities in terms of magnitude and phase. Circuit laws for resistive AC circuits are also mentioned.
Alternating current (AC), is an electric current in which the flow of electric charge periodically reverses direction, whereas in direct current (DC, also dc), the flow of electric charge is only in one direction.
Alternating current (AC), is an electric current in which the flow of electric charge periodically reverses direction, whereas in direct current (DC, also dc), the flow of electric charge is only in one direction.
Class 12 Investigatory project, Presentation, Class 12 Physics Project presentation, Class 12 physics Project,CBSE Class 12 physics project, Transformers
Description of Auto-Transformer working principle,Constructional features of Auto transformer,Advantages of Auto transformer,Inductional law in Auto transformer,copper saving advantage in Auto transformer,Types of Auto transformer,Conversion of two-winding transformet to Auto transformer,Disadvantages of Auto transformer,Applications of Auto transformer,Limitations of Auto transformer.
Generalized network constants and equivalent circuits of short, medium, long transmission line. Line performance: regulation and efficiency, Ferranti effect.
Here we study the construction of hay's bridge, hay's bridge theory with expression, and example, hay's bridge phasor diagram. The Hay’s bridge is used for determining the self-inductance of the circuit. The bridge is the advanced form of Maxwell’s bridge.
Class 12 Investigatory project, Presentation, Class 12 Physics Project presentation, Class 12 physics Project,CBSE Class 12 physics project, Transformers
Description of Auto-Transformer working principle,Constructional features of Auto transformer,Advantages of Auto transformer,Inductional law in Auto transformer,copper saving advantage in Auto transformer,Types of Auto transformer,Conversion of two-winding transformet to Auto transformer,Disadvantages of Auto transformer,Applications of Auto transformer,Limitations of Auto transformer.
Generalized network constants and equivalent circuits of short, medium, long transmission line. Line performance: regulation and efficiency, Ferranti effect.
Here we study the construction of hay's bridge, hay's bridge theory with expression, and example, hay's bridge phasor diagram. The Hay’s bridge is used for determining the self-inductance of the circuit. The bridge is the advanced form of Maxwell’s bridge.
Acetabularia Information For Class 9 .docxvaibhavrinwa19
Acetabularia acetabulum is a single-celled green alga that in its vegetative state is morphologically differentiated into a basal rhizoid and an axially elongated stalk, which bears whorls of branching hairs. The single diploid nucleus resides in the rhizoid.
Francesca Gottschalk - How can education support child empowerment.pptxEduSkills OECD
Francesca Gottschalk from the OECD’s Centre for Educational Research and Innovation presents at the Ask an Expert Webinar: How can education support child empowerment?
How to Make a Field invisible in Odoo 17Celine George
It is possible to hide or invisible some fields in odoo. Commonly using “invisible” attribute in the field definition to invisible the fields. This slide will show how to make a field invisible in odoo 17.
The French Revolution, which began in 1789, was a period of radical social and political upheaval in France. It marked the decline of absolute monarchies, the rise of secular and democratic republics, and the eventual rise of Napoleon Bonaparte. This revolutionary period is crucial in understanding the transition from feudalism to modernity in Europe.
For more information, visit-www.vavaclasses.com
Read| The latest issue of The Challenger is here! We are thrilled to announce that our school paper has qualified for the NATIONAL SCHOOLS PRESS CONFERENCE (NSPC) 2024. Thank you for your unwavering support and trust. Dive into the stories that made us stand out!
A Strategic Approach: GenAI in EducationPeter Windle
Artificial Intelligence (AI) technologies such as Generative AI, Image Generators and Large Language Models have had a dramatic impact on teaching, learning and assessment over the past 18 months. The most immediate threat AI posed was to Academic Integrity with Higher Education Institutes (HEIs) focusing their efforts on combating the use of GenAI in assessment. Guidelines were developed for staff and students, policies put in place too. Innovative educators have forged paths in the use of Generative AI for teaching, learning and assessments leading to pockets of transformation springing up across HEIs, often with little or no top-down guidance, support or direction.
This Gasta posits a strategic approach to integrating AI into HEIs to prepare staff, students and the curriculum for an evolving world and workplace. We will highlight the advantages of working with these technologies beyond the realm of teaching, learning and assessment by considering prompt engineering skills, industry impact, curriculum changes, and the need for staff upskilling. In contrast, not engaging strategically with Generative AI poses risks, including falling behind peers, missed opportunities and failing to ensure our graduates remain employable. The rapid evolution of AI technologies necessitates a proactive and strategic approach if we are to remain relevant.
Biological screening of herbal drugs: Introduction and Need for
Phyto-Pharmacological Screening, New Strategies for evaluating
Natural Products, In vitro evaluation techniques for Antioxidants, Antimicrobial and Anticancer drugs. In vivo evaluation techniques
for Anti-inflammatory, Antiulcer, Anticancer, Wound healing, Antidiabetic, Hepatoprotective, Cardio protective, Diuretics and
Antifertility, Toxicity studies as per OECD guidelines
Normal Labour/ Stages of Labour/ Mechanism of LabourWasim Ak
Normal labor is also termed spontaneous labor, defined as the natural physiological process through which the fetus, placenta, and membranes are expelled from the uterus through the birth canal at term (37 to 42 weeks
Unit 8 - Information and Communication Technology (Paper I).pdfThiyagu K
This slides describes the basic concepts of ICT, basics of Email, Emerging Technology and Digital Initiatives in Education. This presentations aligns with the UGC Paper I syllabus.
Safalta Digital marketing institute in Noida, provide complete applications that encompass a huge range of virtual advertising and marketing additives, which includes search engine optimization, virtual communication advertising, pay-per-click on marketing, content material advertising, internet analytics, and greater. These university courses are designed for students who possess a comprehensive understanding of virtual marketing strategies and attributes.Safalta Digital Marketing Institute in Noida is a first choice for young individuals or students who are looking to start their careers in the field of digital advertising. The institute gives specialized courses designed and certification.
for beginners, providing thorough training in areas such as SEO, digital communication marketing, and PPC training in Noida. After finishing the program, students receive the certifications recognised by top different universitie, setting a strong foundation for a successful career in digital marketing.
Embracing GenAI - A Strategic ImperativePeter Windle
Artificial Intelligence (AI) technologies such as Generative AI, Image Generators and Large Language Models have had a dramatic impact on teaching, learning and assessment over the past 18 months. The most immediate threat AI posed was to Academic Integrity with Higher Education Institutes (HEIs) focusing their efforts on combating the use of GenAI in assessment. Guidelines were developed for staff and students, policies put in place too. Innovative educators have forged paths in the use of Generative AI for teaching, learning and assessments leading to pockets of transformation springing up across HEIs, often with little or no top-down guidance, support or direction.
This Gasta posits a strategic approach to integrating AI into HEIs to prepare staff, students and the curriculum for an evolving world and workplace. We will highlight the advantages of working with these technologies beyond the realm of teaching, learning and assessment by considering prompt engineering skills, industry impact, curriculum changes, and the need for staff upskilling. In contrast, not engaging strategically with Generative AI poses risks, including falling behind peers, missed opportunities and failing to ensure our graduates remain employable. The rapid evolution of AI technologies necessitates a proactive and strategic approach if we are to remain relevant.
1. ALTERNATING VOLTAGES AND CURRENT
1.1 understand alternating current
1.2 understand the generation of an alternating current
1.3 understand a sinusoidal voltage and current values
1.4 understand angular measurement of a sine wave
1.5 understand a phasor to represent a sine wave
1.6 understand the basic circuits laws of resistive AC
circuits
1.7 use an osilloscope to measure waveforms
4. Direct
current (DC), always flows in the same
direction (always positive or always negative),
but it may increase and decrease
Electronic
circuits normally require a steady DC
which is constant at one value or a smooth DC
supply which has a small variation called ripple
Cells,
batteries and regulated power supplies
provide steady DC which is ideal for electronic
circuits
5.
6. o
o
o
o
Alternating Current (AC) flows one way,
then the other way, continually reversing
direction
An AC voltage is continually changing
between positive (+) and negative (-)
The rate of changing direction is called
frequency of the AC and it is measured in
Hertz (Hz) which is the number of
forwards-backwards cycles per second
An AC supply is suitable for powering
some devices such as lamps and heaters
7. There
are distinct advantages of AC over DC
electricity.
The ability to readily transform voltages is
the main reason to use AC instead of DC
Since high voltages are more efficient for
sending electricity great distances, AC
electricity has an advantage over DC.
This is because the high voltages from the
power station can be easily reduced to a
safer voltage for use in the house by using
the transformer
8. AC
is commonly use to power our television,
lights and computers. In AC electricity, the
current alternates in direction.
The motors that using AC are smaller, more
durable and difficult to damage because AC
motor doesn’t have commutator
AC supply more easier to converted to DC by
using rectifier
9. Sinusoidal
AC voltages are available from
variety of sources
The most common source is the typical home
outlet, which provides an ac voltage that
originates at a power plant; such a power
plant is most commonly fueled by water
power, oil, gas, or nuclear fusion.
10. A
Faraday’s law states that the magnitude of
the electromotive force induced in a circuit
is proportional to the rate of change of
magnetic flux linking the circuit
e = N d
dt
11. An induced current is always in such a direction as
to oppose the motion or change causing it
16. Figures
(1) and (2) show a suspended loop of
wire (conductor) being rotated (moved) in a
clockwise direction through the magnetic
field between the poles of a permanent
magnet.
For ease of explanation, the loop has been
divided into a dark half and light half
17. (A) – the dark half is moving along (parallel to) the lines of force.
- the light half also moving in the opposite direction
- Consequently, it is cutting NO lines of force, so no EMF is
induced
(B) – the loop rotates toward the position, its cuts more line of
force per second (inducing an ever-increasing voltage)
because it is cutting more directly across the field (lines of
force)
- the conductor is shown completing one-quarter of a
complete revolution, or 90°, of a complete circle
- the conductor is cutting directly across the field, the voltage
induced in the conductor is maximum
- the value of induced voltage at various points during the
rotation from the (A) to (B) is plotted on a graph
18. (C) - the loop rotates toward the position, its cuts fewer line of
force
- the induced voltage decreases from its peak value and the
loop is once again moving in a plane parallel to the
magnetic field, so no EMF is induced in the conductor
- the loop is now rotated through half a circle (180°)
(D) – when the loop rotates to the position shown in (D), the
action reverses
- the dark half is moving up and the light half is moving down,
so that the total induced EMF and its current have reversed
direction
- the voltage builds up to maximum in reversed direction, as
shown in the graph
19. (E) – the loop finally returns to its original position, at which point
voltage is again zero
- the sine curve represents on complete cycle of voltage
generated by the rotating loop
- continuous rotation of the loop will produce a series of sinewave voltage cycles (an AC voltage)
20. An equation of a
sinusoidal waveform is :
e = Em sin (t + )
Thus,
e = the instantaneous value of voltage
Em = the peak value of the waveform
= the angular velocity ( = 2f or = 2
T
21.
22. FREQUENCY (f) : The number of cycles per second
It is measured in hertz (Hz)
f=1/T
PERIOD (T)
: The time taken for the signal to
complete one cycle
It is measured in seconds (s)
T=1/f
PEAK VALUE or AMPLITUDE : The maximum value of
a waveform
23. INSTANTANEOUS VALUE : The value of voltage at one
particular instant (any
point)
EFFECTIVE (rms) VALUE : The value of alternating
voltage that will have the
same effect on a
resistance as a
comparable value of direct
voltage will have on the same
resistance
rms value (Vrms)= 0.707Em
24. AVERAGE VALUE : The average of all instantaneous
values during one alternation
average value (Vavg) = 0.637Em
FORM FACTOR : The ratio between rms value and
average value
Vrms = 1.11
Vavg
PEAK FACTOR : peak value / 0.707 peak value = 1.414
25. Equation
for an alternating current is :
I = 70.71 sin 520t
Determine :
i)
Peak current value
ii) Rms current value
iii) Average current value
iv) frequency
26. Peak value (Ip) = 70.71 A
ii) Rms value (Irms) = 0.707Ip
= 0.707 x 70.71 = 50 A
iii) Average value (Iavg) = 0.637Ip
= 0.637 x 70.71
= 45 A
iv) = 2f = 82.76 Hz
i)
27.
28. The
points on the sinusoidal waveform are
obtained by projecting across from the
various positions of rotation between 0o and
360o to the ordinate of the waveform that
corresponds to the angle, θ and when the
wire loop or coil rotates one complete
revolution, or 360o, one full waveform is
produced
From the plot of the sinusoidal waveform we
can see that when θ is equal to 0o, 180o or
360o, the generated EMF is zero as the coil
cuts the minimum amount of lines of flux
29. But
when θ is equal to 90o and 270o the
generated EMF is at its maximum value as
the maximum amount of flux is cut
The sinusoidal waveform has a positive peak
at 90o and a negative peak at 270o
the waveform shape produced by our simple
single loop generator is commonly referred
to as a Sine Wave as it is said to be
sinusoidal in its shape
When dealing with sine waves in the time
domain and especially current related sine
waves the unit of measurement used along
the horizontal axis of the waveform can be
either time, degrees or radians
30. In
electrical engineering it is more common
to use the Radian as the angular
measurement of the angle along the
horizontal axis rather than degrees
For example, ω = 100 rad/s, or 500 rad/s.
Phase Difference Equation :
Am
- is the amplitude of the waveform.
ωt - is the angular frequency of the waveform
in radian/sec.
Φ (phi) - is the phase angle in degrees or
radians that the waveform has shifted either left
or right from the reference point.
34. What is the phase relationship between the
sinusoidal waveforms of each of the
following sets?
a.
b.
V = 10sin(t + 30°)
I = 5sin(t + 70°)
I = 15sin(t + 60°)
v = 10sin(t - 20°)
35. The
Radian, (rad) is defined mathematically
as a quadrant of a circle where the distance
subtended on the circumference equals the
radius (r) of the circle.
Since the circumference of a circle is equal
to 2π x radius, there must be 2π radians
around a 360o circle, so 1 radian =
360o/2π = 57.3o
36. Using radians as the unit of measurement for a
sinusoidal waveform would give 2π radians for one
full cycle of 360o. Then half a sinusoidal waveform
must be equal to 1π radians or just π (pi). Then
knowing that pi, π is equal to 3.142 or 22÷7
37.
38.
39.
40. A sinusoidal waveform is defined as:
Vm = 169.8 sin(377t) volts. Calculate the RMS
voltage of the waveform, its frequency and
the instantaneous value of the voltage after
a time of 6mS.
41. Then comparing this to our given expression for a
sinusoidal waveform above of Vm = 169.8 sin(377t)
will give us the peak voltage value of 169.8 volts
for the waveform.
42. The angular velocity (ω) is given as 377 rad/s.
Then 2πƒ = 377. So the frequency of the
waveform is calculated as:
The instantaneous voltage Vi value after a
time of 6mS is given as:
43. Note that the phase angle at time t = 6mS is
given in radians. We could quite easily
convert this to degrees if we wanted to and
use this value instead to calculate the
instantaneous voltage value. The angle in
degrees will therefore be given as:
44. Basically
a rotating vector, simply called a
"Phasor" is a scaled line whose length
represents an AC quantity that has both
magnitude ("peak amplitude") and direction
("phase") which is "frozen" at some point in
time
A phasor is a vector that has an arrow head
at one end which signifies partly the
maximum value of the vector quantity ( V or
I ) and partly the end of the vector that
rotates
45. Generally,
vectors are assumed to pivot at
one end around a fixed zero point known as
the "point of origin" while the arrowed end
representing the quantity, freely rotates in
an anti-clockwise direction at an angular
velocity, ( ω ) of one full revolution for every
cycle
This anti-clockwise rotation of the vector is
considered to be a positive rotation.
Likewise, a clockwise rotation is considered
to be a negative rotation
46. The single vector rotates in an anti-clockwise
direction, its tip at point A will rotate one complete
revolution of 360o or 2π representing one complete
cycle
47. The current, i is lagging the voltage, v by angle Φ
and in our example above this is 30
o
48. The phasor diagram is drawn corresponding to time
zero (t = 0) on the horizontal axis. The lengths of the
phasors are proportional to the values of the voltage,
(V) and the current, (I) at the instant in time that the
phasor diagram is drawn. The current phasor lags the
voltage phasor by the angle, Φ, as the two phasors
rotate in an anticlockwise direction as stated earlier,
therefore the angle, Φ is also measured in the same
anticlockwise direction.
49. Many
ac circuits contain resistance only. The
rules for these circuits are the same rules
that apply to dc circuits.
Resistors, lamps, and heating elements are
examples of resistive elements.
When an ac circuit contains only resistance,
Ohm's Law, Kirchhoff's Law, and the various
rules that apply to voltage, current, and
power in a dc circuit also apply to the ac
circuit.
50. I.
Voltage and Current
The basic circuit shown below, where the
source voltage Vs is a sinusoidal waveform
will be used to represent a general resistive
AC circuit.
51. All
the laws and formulas that apply to DC
circuits also apply to AC circuits.
Furthermore they apply exactly the same
way to AC Resistive circuits
This is true, because resistors are linear
components and their characteristics do not
depend on frequency
Hence, the current in the above circuit is
simply I = V/R.
52. The
waveform representing the current is
smaller than that one representing the
voltage because of the 1/R factor given by
Ohm's law
For purely resistive circuits the current and
voltage are in phase with one another
Figure below shown that the Yellow
waveform represents the voltage and the
Green waveform represents the current in
the circuit, they are in phase with one
another
53.
54. II.
AC Resistor circuits
Figure below is a series-parallel AC circuit
containing several resistors. The same rules
that apply to DC circuits apply to AC resistive
circuits.
To
deal with a circuit such as the one given
above the resistors can be combined to
obtain an equivalent resistance Req
55. Voltage
dividers and current dividers can be
used same as in DC circuits.
Kirchhoff's Current Law and Voltage Law
apply just in exactly the same way as in DC
circuits
Ohm's law and the power formula can also be
applied same as before
Hence, there is nothing unfamiliar about
resistor AC circuits, except that all the
voltages and currents are sinusoidal
waveforms with specific Peak or RMS
amplitudes and a frequency the same as the
frequency of the source voltage Vs.
56. III.
Power in AC Resistive circuits
The Power formula indicates that P = I·V, the
only distinction with DC circuits is that here
it must be noted whereas this is a Peak value
of power (if the current and voltage are Peak
values) or if it is an RMS value for power (in
the case that both current and voltage are
RMS values).
How then are the RMS and Peak values of
power related?
Well, since Irms = Ip/√2 and Vrms =Vp/√2; and
also since Prms = Irms · Vrms , then
Prms = Ip/√2 · Vp/√2 = (Ip·Vp)/2 = Pp/2.
57. Hence,
the answer is that the RMS value of
the power in an AC resistive circuit is one
half its peak value. This is the only
distinction worth noting between power in
AC resistive circuits and in DC circuits.