CEN/TC 312 Thermal solar systems and components

•

0 likes•362 views

Παρουσίαση της γραμματείας της TC 312 στη Γενική Συνέλευση της ΕΒΗΕ της 11.7.2016 με τίτλο: Thermal solar systems and components

Engineering

CEN/TC 312
Thermal solar systems and components
Γενική συνέλευση ΕΒΗΕ
Iούλιος 2016

Ιούλιος2016Γ.Σ. ΕΒΗΕ
Πρόεδρος: Π. Κωνσταντινίδης (μέχρι 17-10-2016)
Γραμματεία: ΕΛΟΤ
WG1 – Solar Collectors –Convenor A. Bohren – SNV (Switzerland)
WG2 – Factory made systems – Convenor V. Sharma – UNI (Italy)
WG3 – Custom built systems –Convenor S. Laipple – DIN (Germany)
WG4 – Marking and Labelling - Convenor J.E.Nielsen – DS (Denmark)

Ιούλιος2016Γ.Σ. ΕΒΗΕ
Δημοσιευμένα πρότυπα
• EN ISO 9488:1999 Solar energy – Vocabulary (ISO 9488:1999)
• EN12975-1:2006+A1:2010 Thermal solar systems and components –
Solar collectors – Part 1: General requirements
• EN ISO 9806:2013 Solar energy-Solar thermal collectors –Test methods (VA/CEN Lead)
• EN ISO 22975-3:2014 Solar energy – Collector components and materials – Part 3:
Absorber surface durability (VA/CEN Lead)
• EN12976-1:2006 Thermal solar systems and components – Factory made systems –
Part 1: General requirements
• EN12976-2:2006 Thermal solar systems and components – Factory made systems –
Part 2: Test methods
• EN12977-1:2012 Thermal solar systems and components – Custom built systems –
Part 1: General requirements for solar water heaters and combisystems
• EN12977-2:2012 Thermal solar systems and components – Custom built systems –
Part 2: Test methods for solar water heaters and combisystems
• EN12977–3:2012 Thermal solar systems and components – Custom built systems –
Part 3: Performance test methods for solar water heater stores
• EN12977-4:2012 Thermal solar systems and components – Custom built systems –
Part 4: Performance test methods for solar combistores
• EN12977-5:2012 Thermal solar systems and components – Custom built systems –
Part 5: Performance test methods for control equipment

Ιούλιος2016Γ.Σ. ΕΒΗΕ
Πρότυπα υπό ανάπτυξη
• WI 00312033 prEN ISO 22975-1 Solar Energy – Collector components and materials,
Part 1: Evacuated tubes – Durability and Performance. (WG1 – ISO lead)
• WI 00312034 prEN ISO 22975-2 Solar Energy – Collector components and materials,
Part 2: Heat pipes for evacuated tubes – Durability and Performance. (WG1–ISO lead)
• WI 00312035 prEN12976-2 rev Thermal solar systems and components – Factory made
systems – Part 2: Test methods. (WG2)
• WI 00312036 prEN12976-1 rev Thermal solar systems and components – Factory made
systems – Part 1: General requirements. (WG2)
• WI 00312038 prEN ISO 9806rev Solar energy – Solar thermal collectors – Test methods (WG1)
• WI 00312039 prEN 12975rev Thermal solar systems and components – Solar collectors – Part 1: General
requirements (WG1)
• WI 00312040 prEN 12977-2 rev Thermal solar systems and components - Custom built systems - Part 2:
Test methods for solar water heaters and combisystems (WG1)
• WI 00312041 prEN 12977-4 rev Thermal solar systems and components - Custom built systems - Part 4:
Performance test methods for solar combistores (WG1)
• WI 00312042 prEN 12977-5 rev Thermal solar systems and components - Custom built systems - Part 5:
Performance test methods for control equipment (WG1)
• WI 00312043 prEN 12977-1 rev Thermal solar systems and components - Custom built systems - Part 1:
General requirements for solar water heaters and combisystems (WG1)

Ιούλιος2016Γ.Σ. ΕΒΗΕ
Συναντήσεις / meetings
• 18η συνάντηση ολομέλειας της επιτροπής CEN TC312 : Παρίσι (Γαλλία) 08-10-2015
• 19η συνάντηση ολομέλειας της επιτροπής CEN TC312 : Χανιά (Ελλάδα) 19-10-2016
Day Date Time Title of meeting
Monday 17th October
Morning 08:00 - 12.00 CEN TC312 WG1
Afternoon 13.00-19.00 SKN meeting
Tuesday 18th October
Morning 09.00-14.00 SKN meeting
Afternoon 14.45 - 18.00 CEN TC312 WG2 & WG3 meeting
Afternoon 16:00 - 20.00 CEN TC312 WG1
Wednesday 19th October
Morning
Afternoon
Afternoon 16:00 - 20.00 CEN TC312 WG1
Thursday 20th October ISO TC 180
Morning
09.00-11.00
Joint CEN TC312 plenary meeting and
ISO TC180
Afternoon 13:00-17:00 TC 180 SC1
Afternoon 13:00-17:00 TC 180 WG3
Friday 21th October
Morning 09:00-12.30 TC 180 SC4
Afternoon 13.30-17.00 TC 180 plenary
9:00-18:00 CEN TC312 plenary meeting

This document provides an environmental product declaration for several types of electromechanical actuators produced by Siemens. It includes information on typical energy consumption, materials used, weight, waste treatment, and certifications. The actuators are designed to reduce energy usage through automatic shutoff in the end positions and comply with RoHS restrictions. The document states that the actuators should not be disposed of with standard waste and must be properly recycled or treated as electronic waste according to local laws.

Cold start of a 5.5MVA offshore transformer

Pieter Jan Jordaens

CG Power Systems Belgium, a leading supplier of on- and offshore wind turbine transformers and power solutions, is using OWI-Lab's large climate chamber on a frequently basis to test and validate their products under extreme climatic conditions. Hot climate and cold start-up tests with full electrical capacity are performed on a 'time sharing' basis in the laboratory. This means CG Power Systems rents the needed test infrastructure and their own engineers perform the testing. The large testing space makes it possible for CG Power Systems to tests and validate multiple systems in one time at the same testing conditions. Simultaneous testing can be interesting for example to benchmark results of changes in the design with different product versions of machinery in the same climatic conditions.

B3 - KS ORKA: Joint Venture Kaishan China & Hugar Orka Iceland

Iceland Geothermal

Transcript_Shu Wang

Shu Wang

Wang Shu is a 5th year undergraduate student in the Petroleum Systems Engineering program at the University of Regina. He is currently registered in 5 courses for the 2017 Winter term: ENGG 401 Engineering Law and Professionalism, ENIN 433 Risk Assessment, ENPE 380 Petroleum Treating Operations, ENPE 419 PSE Design Project and Communication, and ENPE 486 Heavy Oil Recovery. He has also received 9 transfer credits from Tianjin University of Commerce.

Fan performance report

Bobby Mokoena

Sandia 2014 Wind Turbine Blade Workshop- Grife

Sandia National Laboratories: Energy & Climate: Renewables

Vortex generators were installed on over 500 turbines in 2014 to study their effects on reliability and performance. Trials showed that VGs provided production gains compared to unmodified turbines, though the gains were small and validation is challenging. VGs were found to positively impact airflow attachment along turbine blades to reduce stall effects. Testing also indicated that VGs may impact wind sensor readings on nacelles.

LLNL-PRES-692694

Lucas Rolison

This document summarizes radiation shielding modeling done for critical fuel injection components in the LIFE fusion energy project. Monte Carlo simulations were used to model radiation transport from fusion targets and evaluate heating and damage to injection system materials from neutrons and photons. Results showed that a boron carbide shutter was effective at shielding and a minimum of 1 meter of concrete flooring could reduce radiation effects by 3 orders of magnitude, enabling component lifetimes of several years. Further modeling refinements and design optimizations were recommended to improve shielding.

Assessment of for Suitability of Ductile Iron Castings for cold climates

Abdullah Ansari

This document summarizes a technical feasibility assessment of using EN-GJS-400-18-LT castings for cold climate applications. Impact testing was conducted on 85 castings at various temperatures, and regression analysis showed that impact value is most significantly predicted by testing temperature and proof strength. Factor analysis identified testing temperature as the main effect. Of 80 castings tested at -20C, the analysis estimated that 6 would meet an impact requirement of 10J average at -40C, while 71 would meet 7J individual. It was concluded that 7J individual at -40C is very possible for EN-GJS-400-18-LT, but 10J average would require using EN-GJS-350-22-

This document provides a brief summary of three key European and international standards related to solar thermal glazed collectors and solar domestic hot water systems. It describes standards for testing the performance of solar collectors, qualification test procedures for collectors, and performance testing of solar hot water systems. The purpose is to inform manufacturers, retailers, installers and authorities about the basic aspects of these important standards.

Solar thermal testing

Intertek CE

Intertek provides testing and certification services for solar thermal collectors according to various global standards. Their labs in China and Texas allow manufacturers to access certification marks in the US, Canada, Europe, and China to comply with standards such as SRCC, cETL, EN 12975, ISO 9806, and Golden Sun Mark. Intertek tests collectors for thermal performance, pressure leakage, exposure, load tests, and more to certify collectors are safe and meet requirements.

Jim Thomas: 2013 Sandia National Laboratoies Wind Plant Reliability Workshop

Sandia National Laboratories: Energy & Climate: Renewables

This document summarizes the analysis of operational data from wind turbine pilot projects. Key findings include: - Data quality and completeness improved over time but remains an ongoing concern. - Availability is reported using the IEC standard to promote consistent metrics. - Power curve and event analysis can identify performance issues but are limited by data quality. - Preliminary event analysis using Weibull techniques showed potential to provide useful insights about common failure modes.

Purje Juha, Inspecta Tarkastus (Suomija), „Visagino VAE projektas. Techniniai...

Denis Senin

The document discusses specifications for nuclear power plant construction. It provides an overview of major project phases, including engineering, manufacturing, and operation. It also discusses regulatory frameworks, codes, standards and their implications for safety classes. Experience from recent projects in Sweden is presented, highlighting some common challenges like shortage of experienced personnel and qualification issues. The extent of work for a new nuclear power plant project is large, involving many systems. The choice of codes and standards, such as ASME versus European standards, has implications for manufacturing opportunities for suppliers. Maintaining proper project leadership and starting preparations early are emphasized as important for success.

Jens Gunnars, „Inspecta Technology“ technikos vadovas, Mikael Kuokkanen, „Ins...

Versli Lietuva (Enterprise Lithuania)

The document discusses specifications for nuclear power plant construction. It notes that maintaining project leadership by the licensee is essential in all project phases. Choosing codes and standards that comply with national and European legislation can promote national manufacturers. Early and clear communication of requirements to all suppliers is important. Training suppliers on documentation and quality standards is also key. National expertise must continue growing to support the nuclear industry.

Used fuel andrew sowder - epri

Nuclear Energy Insider

The document summarizes a proposed demonstration project to collect long-term data on the behavior of high burnup nuclear fuel in dry storage. It discusses the history of previous low burnup demonstrations, regulatory concerns about high burnup fuel storage and transportation, and the project plan. The demonstration would load high burnup fuel into a dry storage cask and monitor it over 10+ years to confirm integrity and provide data to support long-term licensing. It outlines the participants, timeline, and deliverables through 2018 with examination of the fuel to occur later.

Laboratorio de Sistemas de Energías Terrestres de “El Arenosillo”

Agencia Andaluza de la Energía

The document describes the renewable energy facilities and laboratories at the Instituto Nacional de Técnica Aeroespacial (INTA). It details the Thermal Solar Energy Laboratory which tests solar thermal collectors and domestic water heating systems. It also describes the Fuel Cells Testing Laboratory with test benches up to 12 kW for controlling fuel cell systems. Additionally, it mentions the Solar Hydrogen Production Plant which uses a photovoltaic field and electrolyzer to produce hydrogen for storage and testing of PEM and PAFC fuel cells.

Mikael Kuokkkanen, Inspecta Nuclear (Švedija), „Visagino VAE projektas. Techn...

Denis Senin

This document discusses nuclear power plant construction specifications and codes. It provides an overview of major nuclear power plant components and systems. It also discusses the regulatory framework for nuclear safety, including international codes and national regulations. Components are divided into safety classes with different requirements depending on their safety significance. The document notes the importance of choosing specifications that comply with national and European laws while also promoting local manufacturers. It emphasizes starting preparation early through training, clear requirements, and cooperation between all stakeholders.

Mikael Kuokkkanen, Inspecta Nuclear (Švedija), „Visagino VAE projektas. Techn...

Versli Lietuva (Enterprise Lithuania)

The document discusses nuclear power plant construction specifications and codes. It provides an overview of major nuclear power plant components and systems. It also discusses regulatory frameworks, safety classes, and implications for specifications. The document compares ASME and EN/European standards and notes the choice of code can impact opportunities for mechanical equipment suppliers. Finally, it discusses experiences from nuclear power plant projects and importance of licensee involvement throughout all project phases.

Purje Juha, Inspecta Tarkastus (Suomija), „Visagino VAE projektas. Techniniai...

Denis Senin

The document discusses specifications for nuclear power plant construction. It summarizes that regulatory frameworks are similar globally but implemented locally through national legislation. It also discusses the importance of (1) maintaining licensee leadership throughout projects, (2) choosing codes and standards that comply with national rules and promote local industry, and (3) starting requirements definition and training suppliers early in new build projects. The document emphasizes that clear communication and cooperation between all stakeholders is important for successful nuclear new build projects.

Purje Juha, Inspecta Tarkastus (Suomija), „Visagino VAE projektas. Techniniai...

Versli Lietuva (Enterprise Lithuania)

The document discusses specifications for nuclear power plant construction. It summarizes that regulatory frameworks are similar globally but implemented locally through national legislation. It also discusses the importance of (1) maintaining licensee leadership throughout projects, (2) choosing codes and standards that comply with national rules and promote local industry, and (3) starting requirements definition and supplier training early. The goal is to create opportunities for national suppliers while ensuring nuclear safety.

Investigation of Metal and Chemical Hydrides for Hydrogen Storage in Novel Fu...

chrisrobschu

DOE Funded Activities Objectives: •Use engineering analyses to screen H2 storage systems against DoD targets & requirements (FY15) •Identify suitable hydrogen storage materials and suitable vehicle demonstration platforms •Develop a preliminary design of an integrated UUV design with a solid hydrogen storage system •Complete detailed design of the hydrogen storage system •Complete integrated system design ONR/NUWC Funded Activities Objectives: • Design and build a small bench-scale, alane-based, hydrogen storage vessel • Perform preliminary testing on the bench-scale, storage system • Package and ship bench-scale vessel and alanematerial to the Navy NUWC • Provide technical support to Navy NUWC for their further testing and evaluation Doe amr st134_motyka_2016_p

Tecnologías de control de emisiones para instalaciones térmicas de biomasa pe...

AVEBIOM

Presentation of KIWA

Mouhcine Benmeziane

ANSI Best Practices and Current Trends

TESCO - The Eastern Specialty Company

Oral Defense V3

Zhengdi Wang,EIT

This document summarizes an undergraduate research project using thermochromic liquid crystal (TLC) technology to measure air temperature changes in a blowdown wind tunnel. The student designed TLC-coated filaments, calibrated their color changes to temperature in a vacuum oven, and measured the filaments' reaction time. Results showed a clear relationship between temperature and hue, with a reaction time of 1.49 seconds for heating and 3.68 seconds for cooling. Future work could improve the calibration and test the filaments in the wind tunnel.

Introduction to energy audit part 2

ZAINI ABDUL WAHAB

This a compilation of the overall process in conducting energy audit based on my personal experiences, training that I attended in Malaysia, India and Japan and information sharing between fellow EE practitioners.Not to forget references from books and internet. I believe this would benefit to those who wants to understand what is energy audit all about for beginners to become an energy auditor and to facilities owners to assess the need to conduct energy audit and energy audit proposals submitted by consultants

Thermodynamics energetics laboratory -ULg- Lab'InSight Biomass to Energy

Réseau LIEU (Liaison Entreprises-Universités)

The Thermodynamics and Energetics Laboratory at the Université de Liège has expertise in modeling, simulation, and experimental testing of thermal and energy systems. Their areas of focus include biomass CHP plants, organic Rankine cycle systems, and positive displacement machines. They provide services to companies such as designing experimental setups, modeling and simulating systems to improve energy performance, and monitoring energy systems. The laboratory has various infrastructure including test rigs for compressors, heat pumps, and organic Rankine cycles.

power plant engineering unit wise questions from previous year question paper...

ManOFF1

Nidec asi service dry ice blasting

Nidec Corporation

This document discusses dry ice blasting for cleaning electric motors. It provides information on periodic maintenance programs for motors, risks associated with different ambient conditions, and the principles and process of dry ice blasting. Case studies are presented showing the benefits of dry ice blasting for cleaning motor components like stators and rotors, including reduced downtime, improved insulation measurements, and elimination of contaminants. The document concludes that dry ice blasting is a powerful, reliable, and beneficial cleaning technique.

Παρουσίαση Κωνσταντίνου Τραβασάρου Προέδου Solar Heat Europe

CEN/TC 312 Thermal solar systems and components

Recommended

Recommended

More Related Content

Similar to CEN/TC 312 Thermal solar systems and components

Similar to CEN/TC 312 Thermal solar systems and components (20)

More from Greek Solar Industry Association (EBHE)

More from Greek Solar Industry Association (EBHE) (18)

Recently uploaded

Recently uploaded (20)

CEN/TC 312 Thermal solar systems and components