case ststudy -210130103021..DAxa.pptx
•Download as PPTX, PDF•
0 likes•6 views
The document discusses various types of pollution including water pollution, noise pollution, air pollution, biomedical waste, and e-waste. It provides information on the sources and effects of different pollutants for water, noise, and air pollution. It also discusses potential solutions to reduce pollution such as reducing the use of fertilizers and pesticides near water, growing organic foods, and composting food waste to help address water pollution.
Report
Share
Report
Share
Recommended
Waste management at agricultural sector
Agricultural waste comes from farms, poultry houses, and slaughterhouses. It includes biological, solid, and hazardous materials. If not properly disposed of, agricultural waste can pollute the land, air, water and harm biodiversity through toxins. Effective waste management is needed and includes reducing, reusing, recycling, and reeducating practices. Treatment plants can process waste to produce biogas while minimizing harmful impacts on the environment. The goal of waste management is to work towards zero waste.
Unit-IV-Environmental Pollution.ppt
This document discusses various types of environmental pollution including definitions, causes, effects, and measures to address different types of pollution. It covers air, water, noise, light, soil pollution as well as general pollution statistics. For each type of pollution, the document defines it, discusses sources and pollutants, effects on health and environment, and methods to control and prevent further pollution. Overall, the document provides a broad overview of different kinds of environmental pollution and approaches to tackle this global issue.
Pollution its types, causes and effects by naveed.m
Pollution is the introduction of contaminants into the natural environment that cause adverse effects. It discusses various types of pollution like air, water, soil, noise, and light pollution. The document outlines causes like industries, vehicles, and agriculture. Effects include health impacts and ecosystem damage. It provides measures to control different types of pollution such as treating wastes, using public transport, and limiting fertilizers. The most polluted world cities include Cairo, Delhi, and Beijing. The conclusion is that reducing pollution requires going green.
Pollution ppt
The document discusses different types of pollution including air, water, land, and noise pollution. It defines each type of pollution, provides examples of sources and causes. It also outlines the effects of each type of pollution on human health, environment and other living organisms. Finally, it discusses some methods to prevent and treat different types of pollution.
WATER POLLUTION PPT
This document discusses various types of water pollution including their sources and effects. It identifies major categories of pollutants such as infectious agents, oxygen-demanding waste, inorganic chemicals, radioactive materials, plant nutrients, organic chemicals, eroded sediment, and heat/thermal pollution. Sources of these pollutants include sewage, industrial effluent, agricultural and stormwater runoff, and household products. The document also provides solutions to prevent water pollution such as reducing nonpoint runoff, reusing treated wastewater, finding substitutes for toxic pollutants, and practicing reduce, reuse, recycle strategies. Individual actions are suggested like proper fertilizer and pesticide use, composting, and not flushing unwanted
Types of Pollutions
The document discusses different types of pollution including air, water, noise, and soil pollution. It provides causes and effects for each type of pollution. For air pollution, key causes included burning of waste, vehicle emissions, agriculture, and industry. Effects are global warming, ozone depletion, acid rain, and impacts on wildlife. Solutions proposed for different types of pollution focus on reducing waste and emissions, using cleaner energy sources, and properly disposing of hazardous materials.
A5 (communication)
This document discusses different types of pollution including air, water, noise, light, and soil pollution. It defines each type of pollution and provides examples of sources and effects. For each type of pollution, it also discusses ways to control and prevent further pollution, such as maintaining a healthy distance between industrial and residential areas for air pollution, conserving water and properly disposing of waste to prevent water pollution, limiting noise from vehicles and machinery to reduce noise pollution, and treating industrial and agricultural waste to control soil pollution. The document aims to raise awareness about the different types of pollution and measures that can be taken to address pollution issues.
Recommended
Waste management at agricultural sector
Agricultural waste comes from farms, poultry houses, and slaughterhouses. It includes biological, solid, and hazardous materials. If not properly disposed of, agricultural waste can pollute the land, air, water and harm biodiversity through toxins. Effective waste management is needed and includes reducing, reusing, recycling, and reeducating practices. Treatment plants can process waste to produce biogas while minimizing harmful impacts on the environment. The goal of waste management is to work towards zero waste.
Unit-IV-Environmental Pollution.ppt
This document discusses various types of environmental pollution including definitions, causes, effects, and measures to address different types of pollution. It covers air, water, noise, light, soil pollution as well as general pollution statistics. For each type of pollution, the document defines it, discusses sources and pollutants, effects on health and environment, and methods to control and prevent further pollution. Overall, the document provides a broad overview of different kinds of environmental pollution and approaches to tackle this global issue.
Pollution its types, causes and effects by naveed.m
Pollution is the introduction of contaminants into the natural environment that cause adverse effects. It discusses various types of pollution like air, water, soil, noise, and light pollution. The document outlines causes like industries, vehicles, and agriculture. Effects include health impacts and ecosystem damage. It provides measures to control different types of pollution such as treating wastes, using public transport, and limiting fertilizers. The most polluted world cities include Cairo, Delhi, and Beijing. The conclusion is that reducing pollution requires going green.
Pollution ppt
The document discusses different types of pollution including air, water, land, and noise pollution. It defines each type of pollution, provides examples of sources and causes. It also outlines the effects of each type of pollution on human health, environment and other living organisms. Finally, it discusses some methods to prevent and treat different types of pollution.
WATER POLLUTION PPT
This document discusses various types of water pollution including their sources and effects. It identifies major categories of pollutants such as infectious agents, oxygen-demanding waste, inorganic chemicals, radioactive materials, plant nutrients, organic chemicals, eroded sediment, and heat/thermal pollution. Sources of these pollutants include sewage, industrial effluent, agricultural and stormwater runoff, and household products. The document also provides solutions to prevent water pollution such as reducing nonpoint runoff, reusing treated wastewater, finding substitutes for toxic pollutants, and practicing reduce, reuse, recycle strategies. Individual actions are suggested like proper fertilizer and pesticide use, composting, and not flushing unwanted
Types of Pollutions
The document discusses different types of pollution including air, water, noise, and soil pollution. It provides causes and effects for each type of pollution. For air pollution, key causes included burning of waste, vehicle emissions, agriculture, and industry. Effects are global warming, ozone depletion, acid rain, and impacts on wildlife. Solutions proposed for different types of pollution focus on reducing waste and emissions, using cleaner energy sources, and properly disposing of hazardous materials.
A5 (communication)
This document discusses different types of pollution including air, water, noise, light, and soil pollution. It defines each type of pollution and provides examples of sources and effects. For each type of pollution, it also discusses ways to control and prevent further pollution, such as maintaining a healthy distance between industrial and residential areas for air pollution, conserving water and properly disposing of waste to prevent water pollution, limiting noise from vehicles and machinery to reduce noise pollution, and treating industrial and agricultural waste to control soil pollution. The document aims to raise awareness about the different types of pollution and measures that can be taken to address pollution issues.
Pollution & India
Pollution is harming the environment and human health in India. Rapid population growth and industrialization have led to problems like industrial pollution, soil erosion, deforestation, and land degradation. This pollution comes from sources like sewage, household garbage, industrial waste, and agricultural runoff. It is causing diseases, harming aquatic life, and depleting fresh water sources. India has been ranked as one of the most environmentally hazardous countries due to these issues. Solutions require preventing pollution, conserving resources, and treating wastes and emissions.
Solid waste management
Solid waste includes organic and inorganic materials that are discarded because they have lost their value to the original user. Solid waste comes from residential, commercial, institutional, and other sources. It can be classified based on its source and type. Improper management of solid waste leads to air and water pollution and health issues. A solid waste management system includes generation, storage, collection, processing, and disposal. Processing techniques include incineration, composting, and landfilling. Proper waste management following rules of reduce, reuse, and recycle is needed.
Water pollution caused by toxic substances
Toxic substances can pollute water through various means such as discharge of industrial and commercial wastewater and waste, release of contaminants in surface runoff from urban and agricultural areas, waste disposal and groundwater leaching, and eutrophication. Other sources of water pollution include agriculture, land clearing, and littering. Some ways to help prevent water pollution are to conserve water, be careful about what is poured down drains, use environmentally friendly household products, limit overuse of pesticides and fertilizers, plant gardens to absorb runoff, and properly dispose of litter.
Pollution types
Pollution is the introduction of contaminants into the natural environment that causes harm. It comes in many forms including air, water, soil, noise, light and plastic pollution. Major causes are industry, vehicle emissions, and improper waste disposal. Effects include damage to ecosystems, health problems and reduced quality of life. Solutions require reducing pollution at the source, proper waste treatment, using renewable resources, and developing clean technologies.
Polllution ppt
This document discusses different types of pollution including air, water, noise, soil and radioactive pollution. It defines pollution as the contamination of the environment that harms it. It describes various sources of air, water and noise pollution such as vehicles, industries, agriculture, construction and festivals. The effects of different types of pollution on health, environment and living organisms are explained. Some measures to control pollution like using cleaner technologies, prohibiting garbage burning and cracking, and establishing green belts are suggested.
pollution #4.pptx
The document discusses various types of pollution including air, water, noise, light, and soil pollution. It defines pollution as the introduction of contaminants into the natural environment that causes adverse effects. The main causes of pollution are identified as industrial activities, vehicular emissions, and improper waste disposal. Effects of pollution mentioned include damage to health, ecosystems, and quality of life. Suggested measures to control pollution involve using cleaner energy sources, sustainable waste management, and creating awareness about environmental protection.
Pollution.pptx
The document discusses four main types of pollution: air, water, noise, and land pollution. It provides examples and causes of each type of pollution, and suggests actions that can be taken to reduce pollution, such as using public transportation, limiting loud noises, preventing waste from being dumped in water sources or on land, and being mindful of industrial pollution.
Environmental
The document discusses several environmental problems: littering, water pollution, air pollution, and deforestation. It defines each problem and describes its causes, effects on humans and wildlife, and possible solutions. Littering is improperly disposing of trash and includes littering's negative impacts like wildlife entanglement and economic costs of cleanup. Water pollution contaminates water bodies through direct or indirect discharge of pollutants. Air pollution is a mixture of particles and gases that causes issues like smog. Deforestation involves clearing forests and contributes to problems including climate change, species loss, and disrupted water cycles.
POLLUTION
This is the presentation which was presented in PPT CONTEST on TCP PRESENTO 2020 organized by THIAGARAJAR COLLEGE OF PRECEPTORS, MADURAI.
Pollution
This document discusses various types of environmental pollution including air, water, and soil pollution. It outlines the causes and effects of different pollutants and provides suggestions of things individuals can do to help reduce pollution, such as recycling, using less packaging and plastic, choosing organic food, and growing one's own vegetables. It also discusses how pollution can be overcome through applying modern technology, environmental education, regulatory monitoring, and environmental protection activities.
Pollution
The document discusses different types of pollution: air, water, and land. It defines each type and provides their sources and effects. Air pollution sources include automobile emissions, tobacco smoke, combustion of coal, and wildfires. Water pollution sources are industrial and domestic effluents. Land pollution sources are acid rain, chemicals, fertilizers, industrial and domestic wastes, and deforestation. The effects of pollution include various health impacts on humans, animals, and plants. The document concludes with recommendations for preventing each type of pollution, such as planting trees, choosing low-polluting vehicles, and reusing items.
Health Garde 7 K-12 Community Health Problem Quarter 4
This document summarizes key topics in community health, including the three categories of community health care (primary, secondary, tertiary), major community health problems (pollution, improper disposal of waste, food safety, etc.), and different types of pollution (water, air, noise, soil). It provides details on various causes and effects of different types of pollution, such as sources of air pollutants, impacts of noise, and causes of soil erosion. The document also discusses refuse storage, collection, and disposal methods, as well as recycling and concepts like garbology.
Pollution hazards and its mitigations
Pollution comes in various forms including water, air, and soil pollution. Water pollution stems from effluent discharge from factories and sewage, posing health risks like cholera. Air pollution in Pakistan causes over 22,000 deaths annually from traffic and industrial emissions. Soil pollution arises from agriculture, mining, and nuclear waste. Mitigation strategies address specific pollutants and aim to strengthen regulations, incentives, and waste management.
Pollution ppt for demo teaching
The document discusses different types of pollution including air, land, and water pollution. It provides details on the causes, effects, and ways to prevent each type of pollution. Some key points include:
- Air pollution occurs when harmful gases, dust, fumes or odors are introduced into the atmosphere, making the air dirty. Burning fossil fuels and chemicals from household/farming products are major causes. Effects include health impacts and damage to plants and wildlife.
- Land pollution results from improper waste disposal and use of chemicals. Agricultural and industrial waste, along with construction and mining activities, contaminate the land. Polluted land can cause respiratory issues, cancer, and contaminated food and water sources.
-
Presentation 27.pptx
This document provides an overview of soil pollution. It discusses the types of soil pollution including agricultural, industrial, and urbanization pollution. The major sources of soil pollution are identified as pesticides/herbicides, fertilizers, solid wastes, and contaminated water. Effects include reduced soil fertility, ecological imbalance, and public health problems. Remedies suggested are reducing chemical usage, recycling, reusing materials, reforestation, and proper waste management.
save environment
This document contains a student paper on the topic of environmental protection. It discusses several key points:
1) It defines the environment as everything that makes up our surroundings and affects our ability to live on Earth, including air, water, plants, and animals.
2) It notes that scientists have found that human activities like air pollution, deforestation, and acid rain are dangerous to both the Earth and ourselves.
3) It discusses the major types of environmental pollution like air, water, and land pollution and provides examples of each. Control measures are also outlined.
4) Suggestions are provided for how individuals can help save the environment through actions like conserving energy and water, recycling
SOLID WASTE AND ITS MANAGEMENT.pptx
Municipal solid waste management is challenging due to increasing waste quantities. Proper management is needed to reduce health and environmental impacts. The 4R approach of reduce, reuse, recycle, and refuse helps minimize waste. Common waste types include household, industrial, medical, and construction debris. Management methods include collection, disposal through landfills or incineration, composting organic materials, and recycling reusable items. Public awareness and private sector involvement are recommended to improve solid waste management systems.
Pollution
This document discusses pollution, specifically air and water pollution. It defines pollution as harmful substances contaminating the environment. Air pollution is defined as contamination that modifies the natural atmosphere. Major sources of air pollution include vehicles, industry, and fires. Air pollutants like carbon monoxide and sulfur dioxide affect human health, animals, plants, and the atmosphere. Water pollution occurs when pollutants are directly or indirectly discharged into water bodies, affecting organisms. Sources of water pollution include industrial, agricultural, and residential waste. Both air and water pollution can be prevented through methods like using public transportation, alternative energy, and reducing waste and chemicals.
Environmental pollution.
The document discusses environmental pollution. It defines environmental pollution as the presence of harmful agents or substances in the environment that can negatively impact human health, wildlife, or property. It identifies three main types of environmental pollution: water contamination, soil contamination, and air pollution. Various causes of pollution are outlined, including domestic and industrial waste, excessive fertilizers and chemicals, tree cutting, burning, trash, and vehicle emissions. The document concludes with recommendations for preventing further environmental pollution, such as proper waste disposal, limiting fertilizer and pesticide use, controlling industries' discharges, and increasing environmental awareness.
CH-10 TRANSPORTATION ENGG..pptx
This document discusses transportation engineering and different modes of transportation. It describes how transportation contributes to national development through industrial, social, cultural and economic development. The key modes discussed are roadways, railways, waterways and airways. For each mode, the document outlines advantages and limitations. It also discusses road traffic and methods of traffic control, including traffic regulation, traffic control devices, and traffic signs/signals.
CH-2 Introduction to surveying.pptx
Surveying is defined and classified into different types based on methods, purposes, and nature of the field. The key methods include triangulation for large areas divided into a network of triangles, and traversing along linear measurements and angular directions. Surveying is used for various purposes like geological, mine, archaeological, and military surveys. It can also be classified based on the nature of the field, such as land, hydrographic, astronomical, and aerial surveys. Common tools include the plane table, theodolite, dumpy level, and total station.
More Related Content
Similar to case ststudy -210130103021..DAxa.pptx
Pollution & India
Pollution is harming the environment and human health in India. Rapid population growth and industrialization have led to problems like industrial pollution, soil erosion, deforestation, and land degradation. This pollution comes from sources like sewage, household garbage, industrial waste, and agricultural runoff. It is causing diseases, harming aquatic life, and depleting fresh water sources. India has been ranked as one of the most environmentally hazardous countries due to these issues. Solutions require preventing pollution, conserving resources, and treating wastes and emissions.
Solid waste management
Solid waste includes organic and inorganic materials that are discarded because they have lost their value to the original user. Solid waste comes from residential, commercial, institutional, and other sources. It can be classified based on its source and type. Improper management of solid waste leads to air and water pollution and health issues. A solid waste management system includes generation, storage, collection, processing, and disposal. Processing techniques include incineration, composting, and landfilling. Proper waste management following rules of reduce, reuse, and recycle is needed.
Water pollution caused by toxic substances
Toxic substances can pollute water through various means such as discharge of industrial and commercial wastewater and waste, release of contaminants in surface runoff from urban and agricultural areas, waste disposal and groundwater leaching, and eutrophication. Other sources of water pollution include agriculture, land clearing, and littering. Some ways to help prevent water pollution are to conserve water, be careful about what is poured down drains, use environmentally friendly household products, limit overuse of pesticides and fertilizers, plant gardens to absorb runoff, and properly dispose of litter.
Pollution types
Pollution is the introduction of contaminants into the natural environment that causes harm. It comes in many forms including air, water, soil, noise, light and plastic pollution. Major causes are industry, vehicle emissions, and improper waste disposal. Effects include damage to ecosystems, health problems and reduced quality of life. Solutions require reducing pollution at the source, proper waste treatment, using renewable resources, and developing clean technologies.
Polllution ppt
This document discusses different types of pollution including air, water, noise, soil and radioactive pollution. It defines pollution as the contamination of the environment that harms it. It describes various sources of air, water and noise pollution such as vehicles, industries, agriculture, construction and festivals. The effects of different types of pollution on health, environment and living organisms are explained. Some measures to control pollution like using cleaner technologies, prohibiting garbage burning and cracking, and establishing green belts are suggested.
pollution #4.pptx
The document discusses various types of pollution including air, water, noise, light, and soil pollution. It defines pollution as the introduction of contaminants into the natural environment that causes adverse effects. The main causes of pollution are identified as industrial activities, vehicular emissions, and improper waste disposal. Effects of pollution mentioned include damage to health, ecosystems, and quality of life. Suggested measures to control pollution involve using cleaner energy sources, sustainable waste management, and creating awareness about environmental protection.
Pollution.pptx
The document discusses four main types of pollution: air, water, noise, and land pollution. It provides examples and causes of each type of pollution, and suggests actions that can be taken to reduce pollution, such as using public transportation, limiting loud noises, preventing waste from being dumped in water sources or on land, and being mindful of industrial pollution.
Environmental
The document discusses several environmental problems: littering, water pollution, air pollution, and deforestation. It defines each problem and describes its causes, effects on humans and wildlife, and possible solutions. Littering is improperly disposing of trash and includes littering's negative impacts like wildlife entanglement and economic costs of cleanup. Water pollution contaminates water bodies through direct or indirect discharge of pollutants. Air pollution is a mixture of particles and gases that causes issues like smog. Deforestation involves clearing forests and contributes to problems including climate change, species loss, and disrupted water cycles.
POLLUTION
This is the presentation which was presented in PPT CONTEST on TCP PRESENTO 2020 organized by THIAGARAJAR COLLEGE OF PRECEPTORS, MADURAI.
Pollution
This document discusses various types of environmental pollution including air, water, and soil pollution. It outlines the causes and effects of different pollutants and provides suggestions of things individuals can do to help reduce pollution, such as recycling, using less packaging and plastic, choosing organic food, and growing one's own vegetables. It also discusses how pollution can be overcome through applying modern technology, environmental education, regulatory monitoring, and environmental protection activities.
Pollution
The document discusses different types of pollution: air, water, and land. It defines each type and provides their sources and effects. Air pollution sources include automobile emissions, tobacco smoke, combustion of coal, and wildfires. Water pollution sources are industrial and domestic effluents. Land pollution sources are acid rain, chemicals, fertilizers, industrial and domestic wastes, and deforestation. The effects of pollution include various health impacts on humans, animals, and plants. The document concludes with recommendations for preventing each type of pollution, such as planting trees, choosing low-polluting vehicles, and reusing items.
Health Garde 7 K-12 Community Health Problem Quarter 4
This document summarizes key topics in community health, including the three categories of community health care (primary, secondary, tertiary), major community health problems (pollution, improper disposal of waste, food safety, etc.), and different types of pollution (water, air, noise, soil). It provides details on various causes and effects of different types of pollution, such as sources of air pollutants, impacts of noise, and causes of soil erosion. The document also discusses refuse storage, collection, and disposal methods, as well as recycling and concepts like garbology.
Pollution hazards and its mitigations
Pollution comes in various forms including water, air, and soil pollution. Water pollution stems from effluent discharge from factories and sewage, posing health risks like cholera. Air pollution in Pakistan causes over 22,000 deaths annually from traffic and industrial emissions. Soil pollution arises from agriculture, mining, and nuclear waste. Mitigation strategies address specific pollutants and aim to strengthen regulations, incentives, and waste management.
Pollution ppt for demo teaching
The document discusses different types of pollution including air, land, and water pollution. It provides details on the causes, effects, and ways to prevent each type of pollution. Some key points include:
- Air pollution occurs when harmful gases, dust, fumes or odors are introduced into the atmosphere, making the air dirty. Burning fossil fuels and chemicals from household/farming products are major causes. Effects include health impacts and damage to plants and wildlife.
- Land pollution results from improper waste disposal and use of chemicals. Agricultural and industrial waste, along with construction and mining activities, contaminate the land. Polluted land can cause respiratory issues, cancer, and contaminated food and water sources.
-
Presentation 27.pptx
This document provides an overview of soil pollution. It discusses the types of soil pollution including agricultural, industrial, and urbanization pollution. The major sources of soil pollution are identified as pesticides/herbicides, fertilizers, solid wastes, and contaminated water. Effects include reduced soil fertility, ecological imbalance, and public health problems. Remedies suggested are reducing chemical usage, recycling, reusing materials, reforestation, and proper waste management.
save environment
This document contains a student paper on the topic of environmental protection. It discusses several key points:
1) It defines the environment as everything that makes up our surroundings and affects our ability to live on Earth, including air, water, plants, and animals.
2) It notes that scientists have found that human activities like air pollution, deforestation, and acid rain are dangerous to both the Earth and ourselves.
3) It discusses the major types of environmental pollution like air, water, and land pollution and provides examples of each. Control measures are also outlined.
4) Suggestions are provided for how individuals can help save the environment through actions like conserving energy and water, recycling
SOLID WASTE AND ITS MANAGEMENT.pptx
Municipal solid waste management is challenging due to increasing waste quantities. Proper management is needed to reduce health and environmental impacts. The 4R approach of reduce, reuse, recycle, and refuse helps minimize waste. Common waste types include household, industrial, medical, and construction debris. Management methods include collection, disposal through landfills or incineration, composting organic materials, and recycling reusable items. Public awareness and private sector involvement are recommended to improve solid waste management systems.
Pollution
This document discusses pollution, specifically air and water pollution. It defines pollution as harmful substances contaminating the environment. Air pollution is defined as contamination that modifies the natural atmosphere. Major sources of air pollution include vehicles, industry, and fires. Air pollutants like carbon monoxide and sulfur dioxide affect human health, animals, plants, and the atmosphere. Water pollution occurs when pollutants are directly or indirectly discharged into water bodies, affecting organisms. Sources of water pollution include industrial, agricultural, and residential waste. Both air and water pollution can be prevented through methods like using public transportation, alternative energy, and reducing waste and chemicals.
Environmental pollution.
The document discusses environmental pollution. It defines environmental pollution as the presence of harmful agents or substances in the environment that can negatively impact human health, wildlife, or property. It identifies three main types of environmental pollution: water contamination, soil contamination, and air pollution. Various causes of pollution are outlined, including domestic and industrial waste, excessive fertilizers and chemicals, tree cutting, burning, trash, and vehicle emissions. The document concludes with recommendations for preventing further environmental pollution, such as proper waste disposal, limiting fertilizer and pesticide use, controlling industries' discharges, and increasing environmental awareness.
Similar to case ststudy -210130103021..DAxa.pptx (20)
Health Garde 7 K-12 Community Health Problem Quarter 4
Health Garde 7 K-12 Community Health Problem Quarter 4
More from UjasPandya1
CH-10 TRANSPORTATION ENGG..pptx
This document discusses transportation engineering and different modes of transportation. It describes how transportation contributes to national development through industrial, social, cultural and economic development. The key modes discussed are roadways, railways, waterways and airways. For each mode, the document outlines advantages and limitations. It also discusses road traffic and methods of traffic control, including traffic regulation, traffic control devices, and traffic signs/signals.
CH-2 Introduction to surveying.pptx
Surveying is defined and classified into different types based on methods, purposes, and nature of the field. The key methods include triangulation for large areas divided into a network of triangles, and traversing along linear measurements and angular directions. Surveying is used for various purposes like geological, mine, archaeological, and military surveys. It can also be classified based on the nature of the field, such as land, hydrographic, astronomical, and aerial surveys. Common tools include the plane table, theodolite, dumpy level, and total station.
CH-1 INTRODUCTION.pptx
Civil engineering involves many branches including surveying, construction, structural engineering, geotechnical engineering, water resources, transportation, environmental engineering, and urban planning. Key responsibilities of civil engineers include planning, designing, cost estimating, and supervising construction projects for structures such as buildings, bridges, dams, roads, and wastewater systems. Civil engineers also conduct site investigations, develop construction plans, ensure safety and quality control during construction, and maintain infrastructure after projects are completed.
CH_6 Building Material.ppt
This document provides an overview of various construction materials used in civil engineering projects. It discusses naturally available materials like stone, brick, lime, cement and timber. It describes the composition, types, properties and uses of each material. For stone, brick and lime, it specifically outlines the requirements and specifications of different varieties. The document serves as a reference for civil engineers to understand the nature and behavior of various materials used in building and infrastructure development.
AIR POLLUTION.pptx
This document provides an overview of air pollution. It defines air pollution as any visible or invisible particle or gas found in the air that is not part of the original, normal composition, including natural sources like forest fires and dust storms, and unnatural man-made sources like emissions from cars, homes, and factories burning fuels like coal and wood. Pollutants are classified as either primary pollutants, which are directly emitted, or secondary pollutants, which form when primary pollutants react. Examples of indoor air pollutants discussed include radon, asbestos, formaldehyde, and lead. Radon is a radioactive gas that can accumulate in homes and cause lung cancer. Asbestos and formaldehyde are linked
smart city_1.pptx
A smart city utilizes technology and data to optimize functions, promote economic growth, and improve quality of life. Key areas include economic development, mobility, environment, and governance. Smart cities implement technologies like smart parking, traffic management, waste management, and more. The main goal is to use technology and analysis to benefit citizens rather than just deploying technology. India's budget allocates funds to support its Smart Cities Mission but implementing technology faces challenges due to factors like integration into new developments, fast-changing technologies, and multiple stakeholders.
global environmental issues.pptx
The document discusses various global environmental issues with a focus on global warming. It defines global warming as the long-term rise in Earth's average temperature due to human emissions of greenhouse gases. The main causes of global warming are identified as the emission of carbon dioxide, methane, and nitrous oxide from burning fossil fuels, deforestation, and industrial activities. The effects of global warming include rising sea levels, more extreme weather events, emerging diseases, and damage to marine life. Strategies discussed to address global warming include mitigation, adaptation, geoengineering, and frameworks like the UNFCCC.
Ozone.pptx
This presentation summarizes information about the ozone layer and its depletion. It discusses that the ozone layer is a thin layer in the stratosphere that protects the Earth from UV rays. Ozone layer depletion refers to the thinning of this protective layer due to human-produced chemicals like CFCs and halons. The presentation lists causes of depletion such as manufacturing and use of chemicals like refrigerants and propellants. Depletion of the ozone layer affects humans by increasing risks of skin cancer, eye cataracts, and immune disorders. International agreements like the Montreal Protocol aim to reduce ozone-depleting substances to protect the ozone layer.
AIR POLLUTION.pptx
Air pollution is introduced into the atmosphere and can harm humans, other living organisms, and the environment. There are two main types of air pollution: indoor and outdoor. Outdoor pollution includes smog, acid rain, the greenhouse effect, and depletion of the ozone layer. Indoor pollution is more dangerous than outdoor pollution. Air pollution has several negative effects like acidification of lakes and streams, damage to trees and forests, and accelerated decay of materials. It is caused by various sources such as vehicle emissions, industrial operations, and the burning of fossil fuels. Reducing pollution requires changes like using public transport, adopting renewable energy sources, and minimizing emissions.
SMART CITY.pptx
Smart City frameworks include the technology, human, institutional, and energy frameworks. The technology framework requires a service-oriented digital infrastructure to connect individuals and devices, while also leveraging artificial intelligence and machine learning. The human framework focuses on creativity, learning, and humanity through arts, education, and community initiatives. The institutional framework involves partnership between government, organizations, and communities. Finally, the energy framework centers around smart connections for items like lighting and transportation, with energy being paramount and utility companies playing a key role.
global issues.pptx
This document discusses several types of pollution including water pollution, biomedical waste, e-waste, noise pollution, and air pollution. It defines pollution as the introduction of harmful materials into the environment. For each type of pollution, it provides details on sources and effects. For water pollution, sources mentioned include sewage, agriculture, oil, and radioactive substances. For biomedical waste, it discusses proper disposal and management to prevent disease transmission. It also lists some common causes of air pollution like burning fossil fuels and their health effects.
210130103003 Global Environmental Issue.pptx
Biodiversity loss is occurring globally at an unprecedented rate due to human activities. Habitat loss, invasive species, over-exploitation, pollution, and climate change are the main drivers of biodiversity loss. Habitat loss, such as the destruction of rainforests for agriculture, removes species' homes. Invasive species disrupt ecosystems when introduced. Over-exploitation from activities like poaching has endangered many species. Pollution degrades habitats. And climate change is causing shifts that prevent many species from adapting quickly enough. This rapid biodiversity loss poses serious risks to human welfare and Earth's life support systems.
Green building and green city PPT.pptx
This document discusses green buildings and sustainability. It defines a green building according to the EPA as one that creates healthier and more resource-efficient structures. Green buildings are important because they reduce waste, energy and water consumption compared to traditional buildings. The key aspects of planning a green building project are focusing on construction waste reduction, an efficient design, and selecting sustainable materials. Some obstacles are higher initial costs and customer concerns about comfort and value. However, green buildings provide environmental, economic and social benefits such as reduced operating costs, improved health, and conservation of resources.
climate change ppt.pptx
This document discusses climate change, defining it as long-term shifts in temperature and weather patterns that have been mainly driven by human activities like burning fossil fuels since 1800. It outlines six major effects of climate change like more frequent droughts and storms, and heat waves. Five causes of climate change are then given as increased fossil fuel use, deforestation, and cutting down forests. Examples of climate change impacts like rising temperatures and more severe tropical storms are provided. The document concludes with some solutions to climate change like saving energy, using less carbon intensive transportation, and eating more plants.
Air-Pollution-PP.pptx
This document discusses air pollution and the Clean Air Act. It notes that the Clean Air Act was established in 1963 to study and clean up air pollution, with the EPA taking the lead role in 1970. The 1990 revisions expanded EPA authority and emphasized more cost-effective regulation. As a result of these laws, the six main air pollutants have decreased over 50% since 1970. The document urges readers to help reduce pollution through energy conservation and efficient transportation. It also explains thermal inversions, how they trap pollutants near the ground, and demonstrates this phenomenon with an experiment.
GLOBAL ENVIRONMENTAL ISSUES.ppt
Global environmental issues include global warming and the greenhouse effect, climate change, acid rain, ozone layer depletion, and carbon footprint. These issues threaten the planet through rising temperatures, changing weather patterns, pollution of land and water, and damage to the atmosphere. Addressing them requires initiatives like cleaner development mechanisms to reduce emissions and environmental impact.
AIR POLLUTION.ppt
This document discusses air pollution, including its definition, composition of air, structure of the atmosphere, classification of air pollutants, sources of common air pollutants, and effects of common air pollutants. It defines air pollution and explains that the atmosphere consists of five main layers - troposphere, stratosphere, mesosphere, thermosphere, and exosphere - each with varying temperature and density properties. It also classifies air pollutants according to their origin as primary or secondary pollutants and state of matter as gaseous or particulate, and lists some common sources and health effects of major air pollutants.
Particulate_Matter_Module.ppt
The document discusses particulate matter (PM) air pollution, including what PM is, its health risks like premature death and respiratory disease, how it is regulated, where it originates from both natural and human sources, and the extensive research that has been done to understand its effects through epidemiological studies and the setting of future research priorities.
Introduction to Environment
This document outlines the teaching scheme and content for an Environmental Science course taught by Dr. Ujas Pandya. The course covers topics such as introduction to the environment, different types of pollution, global environmental issues, green buildings and smart cities, and the concept of reduce, reuse, recycle. It will include 2 hours of lectures and 2 hours of tutorials per week. Key topics include the components of the environment, environmental pollution and its causes, environmental degradation due to human activities, and the importance of environmental education.
surveying.ppt
Surveying is the science of determining the positions of points on or near the earth's surface. It involves decision making, fieldwork, data processing, mapping, and stakeout. The primary objectives of surveying are to prepare plans for estates, buildings, infrastructure, and to measure areas. Plane surveying considers the earth's surface flat over small areas, while geodetic surveying accounts for curvature over large areas. Distance is typically measured using tapes or chains, and errors are corrected for tape length and temperature.
More from UjasPandya1 (20)
Recently uploaded
原版制作(Newcastle毕业证书)纽卡斯尔大学毕业证在读证明一模一样
学校原件一模一样【微信：741003700 】《(Newcastle毕业证书)纽卡斯尔大学毕业证》【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Peatland Management in Indonesia, Science to Policy and Knowledge Education
Peatland Management in Indonesia, Science to Policy and Knowledge EducationGlobal Landscapes Forum (GLF)
Presented by Feri Johana at GLF Peatlands 2024 - 360 Degree Approach to Improving Capacity of Multiple Stakeholders to Manage Peatland SustainablyPeatlands of Latin America and the Caribbean
Presented by The Global Peatlands Assessment: Mapping, Policy, and Action at GLF Peatlands 2024 - The Global Peatlands Assessment: Mapping, Policy, and Action
Evolving Lifecycles with High Resolution Site Characterization (HRSC) and 3-D...
The incorporation of a 3DCSM and completion of HRSC provided a tool for enhanced, data-driven, decisions to support a change in remediation closure strategies. Currently, an approved pilot study has been obtained to shut-down the remediation systems (ISCO, P&T) and conduct a hydraulic study under non-pumping conditions. A separate micro-biological bench scale treatability study was competed that yielded positive results for an emerging innovative technology. As a result, a field pilot study has commenced with results expected in nine-twelve months. With the results of the hydraulic study, field pilot studies and an updated risk assessment leading site monitoring optimization cost lifecycle savings upwards of $15MM towards an alternatively evolved best available technology remediation closure strategy.
Promoting Multilateral Cooperation for Sustainable Peatland management
Presented by Agus Julianto on GLF Peatlands 2024 - 360 Degree Approach to Improving Capacity of Multiple Stakeholders to Manage Peatland Sustainably
Enhanced action and stakeholder engagement for sustainable peatland management
Enhanced action and stakeholder engagement for sustainable peatland managementGlobal Landscapes Forum (GLF)
Presented by Jan Peters at GLF Peatlands 2024 - The Global Peatlands Assessment: Mapping, Policy, and ActionOverview of the Global Peatlands Assessment
Presented by Patrick Scheel at GLF Peatlands 2024 - The Global Peatlands Assessment: Mapping, Policy, and Action
Climate Change All over the World .pptx
Climate change refers to significant and lasting changes in the average weather patterns over periods ranging from decades to millions of years. It encompasses both global warming driven by human emissions of greenhouse gases and the resulting large-scale shifts in weather patterns. While climate change is a natural phenomenon, human activities, particularly since the Industrial Revolution, have accelerated its pace and intensity
Optimizing Post Remediation Groundwater Performance with Enhanced Microbiolog...
Results of geophysics and pneumatic injection pilot tests during 2003 – 2007 yielded significant positive results for injection delivery design and contaminant mass treatment, resulting in permanent shut-down of an existing groundwater Pump & Treat system.
Accessible source areas were subsequently removed (2011) by soil excavation and treated with the placement of Emulsified Vegetable Oil EVO and zero-valent iron ZVI to accelerate treatment of impacted groundwater in overburden and weathered fractured bedrock. Post pilot test and post remediation groundwater monitoring has included analyses of CVOCs, organic fatty acids, dissolved gases and QuantArray® -Chlor to quantify key microorganisms (e.g., Dehalococcoides, Dehalobacter, etc.) and functional genes (e.g., vinyl chloride reductase, methane monooxygenase, etc.) to assess potential for reductive dechlorination and aerobic cometabolism of CVOCs.
In 2022, the first commercial application of MetaArray™ was performed at the site. MetaArray™ utilizes statistical analysis, such as principal component analysis and multivariate analysis to provide evidence that reductive dechlorination is active or even that it is slowing. This creates actionable data allowing users to save money by making important site management decisions earlier.
The results of the MetaArray™ analysis’ support vector machine (SVM) identified groundwater monitoring wells with a 80% confidence that were characterized as either Limited for Reductive Decholorination or had a High Reductive Reduction Dechlorination potential. The results of MetaArray™ will be used to further optimize the site’s post remediation monitoring program for monitored natural attenuation.
Recycling and Disposal on SWM Raymond Einyu pptx
Increasing urbanization, rural–urban migration, rising standards of living, and rapid development associated with population growth have resulted in increased solid waste generation by industrial, domestic and other activities in Nairobi City. It has been noted in other contexts too that increasing population, changing consumption patterns, economic development, changing income, urbanization and industrialization all contribute to the increased generation of waste.
With the increasing urban population in Kenya, which is estimated to be growing at a rate higher than that of the country’s general population, waste generation and management is already a major challenge. The industrialization and urbanization process in the country, dominated by one major city – Nairobi, which has around four times the population of the next largest urban centre (Mombasa) – has witnessed an exponential increase in the generation of solid waste. It is projected that by 2030, about 50 per cent of the Kenyan population will be urban.
Aim:
A healthy, safe, secure and sustainable solid waste management system fit for a world – class city.
Improve and protect the public health of Nairobi residents and visitors.
Ecological health, diversity and productivity and maximize resource recovery through the participatory approach.
Goals:
Build awareness and capacity for source separation as essential components of sustainable waste management.
Build new environmentally sound infrastructure and systems for safe disposal of residual waste and replacing current dumpsites which should be commissioned.
Current solid waste management situation:
The status.
Solid waste generation rate is at 2240 tones / day
collection efficiently is at about 50%.
Actors i.e. city authorities, CBO’s , private firms and self-disposal
Current SWM Situation in Nairobi City:
Solid waste generation – collection – dumping
Good Practices:
• Separation – recycling – marketing.
• Open dumpsite dandora dump site through public education on source separation of waste, of which the situation can be reversed.
• Nairobi is one of the C40 cities in this respect , various actors in the solid waste management space have adopted a variety of technologies to reduce short lived climate pollutants including source separation , recycling , marketing of the recycled products.
• Through the network, it should expect to benefit from expertise of the different actors in the network in terms of applicable technologies and practices in reducing the short-lived climate pollutants.
Good practices:
Despite the dismal collection of solid waste in Nairobi city, there are practices and activities of informal actors (CBOs, CBO-SACCOs and yard shop operators) and other formal industrial actors on solid waste collection, recycling and waste reduction.
Practices and activities of these actor groups are viewed as innovations with the potential to change the way solid waste is handled.
CHALLENGES:
• Resource Allocation.
Improving the Management of Peatlands and the Capacities of Stakeholders in I...
Improving the Management of Peatlands and the Capacities of Stakeholders in I...Global Landscapes Forum (GLF)
Presented by Sonya Dewi at GLF Peatlands 2024 - 360 Degree Approach to Improving Capacity of Multiple Stakeholders to Manage Peatland SustainablyGlobal Peatlands Map and Hotspot Explanation Atlas
Presented by Alexandra Barthelmes at GLF Peatlands 2024 - The Global Peatlands Assessment: Mapping, Policy, and Action
在线办理(lboro毕业证书)拉夫堡大学毕业证学历证书一模一样
学校原件一模一样【微信：741003700 】《(lboro毕业证书)拉夫堡大学毕业证学历证书》【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Wildlife-AnIntroduction.pdf so that you know more about our environment
All about wildlife, if you are fond of animals and wildlife then do follow us for more content like this
Kinetic studies on malachite green dye adsorption from aqueous solutions by A...
Kinetic studies on malachite green dye adsorption from aqueous solutions by A...Open Access Research Paper
Water polluted by dyestuffs compounds is a global threat to health and the environment; accordingly, we prepared a green novel sorbent chemical and Physical system from an algae, chitosan and chitosan nanoparticle and impregnated with algae with chitosan nanocomposite for the sorption of Malachite green dye from water. The algae with chitosan nanocomposite by a simple method and used as a recyclable and effective adsorbent for the removal of malachite green dye from aqueous solutions. Algae, chitosan, chitosan nanoparticle and algae with chitosan nanocomposite were characterized using different physicochemical methods. The functional groups and chemical compounds found in algae, chitosan, chitosan algae, chitosan nanoparticle, and chitosan nanoparticle with algae were identified using FTIR, SEM, and TGADTA/DTG techniques. The optimal adsorption conditions, different dosages, pH and Temperature the amount of algae with chitosan nanocomposite were determined. At optimized conditions and the batch equilibrium studies more than 99% of the dye was removed. The adsorption process data matched well kinetics showed that the reaction order for dye varied with pseudo-first order and pseudo-second order. Furthermore, the maximum adsorption capacity of the algae with chitosan nanocomposite toward malachite green dye reached as high as 15.5mg/g, respectively. Finally, multiple times reusing of algae with chitosan nanocomposite and removing dye from a real wastewater has made it a promising and attractive option for further practical applications.
ENVIRONMENT~ Renewable Energy Sources and their future prospects.
This presentation is for us to know that how our Environment need Attention for protection of our natural resources which are depleted day by day that's why we need to take time and shift our attention to renewable energy sources instead of non-renewable sources which are better and Eco-friendly for our environment. these renewable energy sources are so helpful for our planet and for every living organism which depends on environment.
Epcon is One of the World's leading Manufacturing Companies.
Epcon is One of the World's leading Manufacturing Companies. With over 4000 installations worldwide, EPCON has been pioneering new techniques since 1977 that have become industry standards now. Founded in 1977, Epcon has grown from a one-man operation to a global leader in developing and manufacturing innovative air pollution control technology and industrial heating equipment.
Microbial characterisation and identification, and potability of River Kuywa ...
Microbial characterisation and identification, and potability of River Kuywa ...Open Access Research Paper
Water contamination is one of the major causes of water borne diseases worldwide. In Kenya, approximately 43% of people lack access to potable water due to human contamination. River Kuywa water is currently experiencing contamination due to human activities. Its water is widely used for domestic, agricultural, industrial and recreational purposes. This study aimed at characterizing bacteria and fungi in river Kuywa water. Water samples were randomly collected from four sites of the river: site A (Matisi), site B (Ngwelo), site C (Nzoia water pump) and site D (Chalicha), during the dry season (January-March 2018) and wet season (April-July 2018) and were transported to Maseno University Microbiology and plant pathology laboratory for analysis. The characterization and identification of bacteria and fungi were carried out using standard microbiological techniques. Nine bacterial genera and three fungi were identified from Kuywa river water. Clostridium spp., Staphylococcus spp., Enterobacter spp., Streptococcus spp., E. coli, Klebsiella spp., Shigella spp., Proteus spp. and Salmonella spp. Fungi were Fusarium oxysporum, Aspergillus flavus complex and Penicillium species. Wet season recorded highest bacterial and fungal counts (6.61-7.66 and 3.83-6.75cfu/ml) respectively. The results indicated that the river Kuywa water is polluted and therefore unsafe for human consumption before treatment. It is therefore recommended that the communities to ensure that they boil water especially for drinking.
Recently uploaded (20)
Peatland Management in Indonesia, Science to Policy and Knowledge Education
Peatland Management in Indonesia, Science to Policy and Knowledge Education
world-environment-day-2024-240601103559-14f4c0b4.pptx
world-environment-day-2024-240601103559-14f4c0b4.pptx
Evolving Lifecycles with High Resolution Site Characterization (HRSC) and 3-D...
Evolving Lifecycles with High Resolution Site Characterization (HRSC) and 3-D...
Promoting Multilateral Cooperation for Sustainable Peatland management
Promoting Multilateral Cooperation for Sustainable Peatland management
Enhanced action and stakeholder engagement for sustainable peatland management
Enhanced action and stakeholder engagement for sustainable peatland management
Optimizing Post Remediation Groundwater Performance with Enhanced Microbiolog...
Optimizing Post Remediation Groundwater Performance with Enhanced Microbiolog...
Improving the Management of Peatlands and the Capacities of Stakeholders in I...
Improving the Management of Peatlands and the Capacities of Stakeholders in I...
Global Peatlands Map and Hotspot Explanation Atlas
Global Peatlands Map and Hotspot Explanation Atlas
Wildlife-AnIntroduction.pdf so that you know more about our environment
Wildlife-AnIntroduction.pdf so that you know more about our environment
Kinetic studies on malachite green dye adsorption from aqueous solutions by A...
Kinetic studies on malachite green dye adsorption from aqueous solutions by A...
ENVIRONMENT~ Renewable Energy Sources and their future prospects.
ENVIRONMENT~ Renewable Energy Sources and their future prospects.
Epcon is One of the World's leading Manufacturing Companies.
Epcon is One of the World's leading Manufacturing Companies.
Microbial characterisation and identification, and potability of River Kuywa ...
Microbial characterisation and identification, and potability of River Kuywa ...
case ststudy -210130103021..DAxa.pptx
- 1. 💧 water pollution 🚱 ➡noise pollution 🔊 ➡Air pollution ♨.... ➡Biomedical waste🚮 ➡E-waste....💻💽 ➡Waste segregation .
- 2. 💧 water pollution ⭐What is water pollution ? ■ Major types of pollutants , sources and effects Point and nonpoint sources Is the water safe to drink ? H H ➖Types, effects and sources
- 3. ▶▶Major Categories of Water Pollutants Infectious Agents • 〰Bacteria , Viruses , Protozoa , Parasitic Worms •〰 Source : Human and animal waste Oxygen - Demanding Waste • 〰Organic debris & waste + aerobic bacteria •〰Source : Sewage , feedlots , paper mills , food processing . I ....norganic Chemicals Acids , Metals , Salts . Sources : Surface ...............runoff , Industrial effluent , household cleansers Radioactive .... .....Materials 〰lodine , radon , uranium , cesium , thorium 〰 • Source : Coal & Nuclear Power plants , mining , weapons ...... ......production , natural ■ ■ Plant Nutrients 〰 Nitrates , Phosphates , 〰. Source : Sewage , manure , agricultural and landscaping runoff Organic Chemicals - Oil , Gasoline , Plastics , Pesticides , .......Solvents , detergents - Sources : Industrial effluent , Household .......cleansers , runoff from farms and yards Eroded Sediment - Soil , Silt ........Heat / Thermal Pollution 〰• Source : Power plants , Industrial
- 8. Solutions water pollution -- Prevent groundwater contamination • Greatly reduce nonpoint runoff • Reuse treated wastewater for irrigation • Find substitutes for toxic pollutants • Work with nature to treat sewage Practice four R's of resource use ( refuse , reduce , recycle , reuse ) • Reduce resource waste Reduce air pollution • Reduce poverty • Reduce birth rates What can you do? Water pollution -- Fertilize your garden and yard plants with manure or compost instead of commercial inorganic fertilizer . • Minimize your use of pesticides . • Never apply fertilizer or pesticides near a body of water . • Grow or buy organic foods . * Compost your food wastes . * Do not use water fresheners in toilets . Do not flush wanted medicines dow the toilet . - Do not pour pesticides , paints , solvents , oil , antifreeze , or other products containing harmful chemicals down the drain or onto the ground . 3 - T
- 9. 🌟Drinking water Quality✨ ♒■ Purification of urban drinking water ♒■ Purification of drinking water in developing countries ♒ ■ Bottled water
- 11. 🔊Sound ➡• Sound is a vibration that propagates as a mechanical wave of pressure and displacement , through some medium ( i.e. air or water ) ➡ . • Sound refers to only those vibrations with frequencies that are within the range of hearing for humans
- 12. ▶What Is Noise pollution ❓ 💠Any unwanted sound that penetrates the environment is noise pollution . 💠In general noise pollution refers to any noise irritating to one's ear which comes from an external source
- 13. 📳Sources of Noise Pollution ➖ • Household Sources ➖• Social Event ➖ ● Commercial and Industrial Activities Transportation
- 14. ...Air pollution 💨 ➡▶What Is Air Pollution ?? ➖ Air pollution is the introduction of chemiclas , particular matter , or biological materials that cause harm to discomfort to humans or other living organisms , or cause damage to the natural environment or built environment , into the atmosphere .
- 15. 🌟 . Types Of Air Pollution ● ➖• There are several types of air pollution , mainly Indoor Air Pollution and Outdoor Air Pollution These include . . smog , acid rain , the green house effect and hole in ozone layer ➖. One type of air pollution is the release of particles into the air ➖. • Another type of air pollution is the release of poisonous gases .
- 16. • It is caused when pollutant combines with droplets of water in the air . • The effects of acid rain on the environment can be serious .
- 19. Biomedical waste
- 20. 💠Biomedical waste ➖ Waste generated from hospitals ➖ • Waste generated from Health care facilities Waste generated from Health research laboratories .
- 21. E-waste 💽💻 Electronic waste loosely discarded , surplus , obsolete , broken electrical or electronic devices
- 25. Thank you